diff options
Diffstat (limited to 'package/base-files/brcm-2.4/etc/init.d')
-rwxr-xr-x | package/base-files/brcm-2.4/etc/init.d/S04nvram | 66 | ||||
-rwxr-xr-x | package/base-files/brcm-2.4/etc/init.d/S05netconfig | 108 |
2 files changed, 174 insertions, 0 deletions
diff --git a/package/base-files/brcm-2.4/etc/init.d/S04nvram b/package/base-files/brcm-2.4/etc/init.d/S04nvram new file mode 100755 index 000000000..4de124735 --- /dev/null +++ b/package/base-files/brcm-2.4/etc/init.d/S04nvram @@ -0,0 +1,66 @@ +#!/bin/sh +# NVRAM setup +# +# This file handles the NVRAM quirks of various hardware. + +# WGT634u +grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit + +alias debug=${DEBUG:-:} + +nvram_default() { + [ -z "$(nvram get $1)" ] && nvram set "$1=$2" +} + +nvram_set() { # for the linksys fixup part + [ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || { + COMMIT=1 + /usr/sbin/nvram set "$1=$2" + } +} + +# work around braindead CFE defaults in linksys routers +boardtype=$(nvram get boardtype) +boardnum=$(nvram get boardnum) +boardflags=$(($(nvram get boardflags))) +adm_switch="$(( ($boardflags & 0x80) >> 7 ))" + +case "$(( $boardtype ))" in + "1800") #0x708 + if [ "$adm_switch" = 0 ]; then + nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))" + [ "$COMMIT" = 1 ] && { + nvram_set sdram_config 0x0062 + nvram_set clkfreq 216 + nvram_set sdram_ncdl 0x0 + nvram_set pa0itssit 62 + nvram_set pa0b0 0x15eb + nvram_set pa0b1 0xfa82 + nvram_set pa0b2 0xfe66 + nvram_set pa0maxpwr 0x4e + } + fi + ;; + "1127") #0x467 + nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))" + [ "$COMMIT" = 1 ] && { + nvram_set sdram_config 0x0062 + nvram_set sdram_ncdl 0x0 + nvram_set pa0itssit 62 + nvram_set pa0b0 0x168b + nvram_set pa0b1 0xfabf + nvram_set pa0b2 0xfeaf + nvram_set pa0maxpwr 0x4e + } + ;; +esac +[ "$COMMIT" = "1" ] && nvram commit + +# hack for some motorola routers +nvram unset wl0gpio0 + +[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && { + # if default wifi mac, set two higher than the lan mac + nvram set il0macaddr=$(nvram get et0macaddr| + awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}') +} diff --git a/package/base-files/brcm-2.4/etc/init.d/S05netconfig b/package/base-files/brcm-2.4/etc/init.d/S05netconfig new file mode 100755 index 000000000..6a626f54a --- /dev/null +++ b/package/base-files/brcm-2.4/etc/init.d/S05netconfig @@ -0,0 +1,108 @@ +#!/bin/sh +[ -e /etc/config/network ] && exit 0 + +mkdir -p /etc/config + +( + if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then + # WGT634u + echo boardtype=wgt634u + else + strings /dev/mtdblock/3 + fi +) | awk ' +function p(name) { + if (c[name] != "") print name "=\"" c[name] "\"" +} + +BEGIN { + FS="=" + c["lan_ifname"]="br0" + c["lan_ifnames"]="vlan0 eth1" + c["wan_proto"]="none" + c["wan_ifname"]="vlan1" + c["vlan0ports"]="1 2 3 4 5*" + c["vlan1ports"]="0 5" +} + +($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") { + nvram[$1] = $2 +} + +END { + # v1 hardware + if (nvram["boardtype"] == "bcm94710dev") { + # Linksys WRT54G v1.x + if (nvram["boardnum"] == "42") { + c["vlan0ports"]="" + c["vlan1ports"]="" + c["lan_ifnames"]="vlan2 eth2" + } + + # Asus WL-500g + if (nvram["boardnum"] == "asusX") { + c["lan_ifnames"]="eth0 eth1 eth2" # FIXME + # wan_ifname=eth1 + } + } + if (nvram["boardtype"] == "wgt634u") { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + c["lan_ifnames"] = "vlan0 ath0" + } + if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + } + + # WAP54G + if ((nvram["boardnum"] == "2") || \ + (nvram["boardnum"] == "1024")) { + c["lan_ifnames"]="eth0 eth1" + c["wan_ifname"]="" + } + + print "#### VLAN configuration " + print "vlan0hwname=et0" + print "vlan1hwname=et0" + p("vlan0ports") + p("vlan1ports") + print "" + print "" + + print "#### LAN configuration" + print "lan_proto=\"static\"" + p("lan_ifname") + p("lan_ifnames") + print "lan_ipaddr=\"192.168.1.1\"" + print "lan_netmask=\"255.255.255.0\"" + print "# lan_dns=\"192.168.1.1\"" + print "# lan_gateway=\"192.168.1.1\"" + + print "" + print "" + + print "#### WAN configuration" + print "# wan_proto: WAN protocol, available protocols:" + print "# none: disable" + print "# dhcp: DHCP" + print "# static: Static IP" + print "# pppoe: PPP over Ethernet" + print "# pptp: Point-to-Point tunneling Protocol" + print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\"" + print "" + print "wan_proto=dhcp" + p("wan_ifname") + print "wan_device=\"" c["wan_ifname"] "\"" + print "# wan_ipaddr=\"192.168.0.2\"" + print "# wan_netmask=\"255.255.255.0\"" + print "# wan_gateway=\"192.168.0.1\"" + print "# wan_dns=\"192.168.0.1\"" + print "" + print "## PPP over Ethernet and PPTP" + print "# wan_ifname=\"ppp0\"" + print "# ppp_username=\"my_username\"" + print "# ppp_passwd=\"my_password\"" + print "# pptp_server_ip=\"192.168.0.1\"" +} +' > /etc/config/network |