diff options
Diffstat (limited to 'package/base-files-network')
9 files changed, 0 insertions, 1042 deletions
diff --git a/package/base-files-network/Makefile b/package/base-files-network/Makefile deleted file mode 100644 index 338da396d..000000000 --- a/package/base-files-network/Makefile +++ /dev/null @@ -1,45 +0,0 @@ -# -# Copyright (C) 2007-2012 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_NAME:=base-files-network -PKG_RELEASE:=4 - -PKG_BUILD_DEPENDS:=opkg/host - -include $(INCLUDE_DIR)/package.mk - -define Package/base-files-network - SECTION:=base - CATEGORY:=Base system - DEPENDS:=@DISABLE_NETIFD - TITLE:=Network scripts for the OpenWrt base system - URL:=http://openwrt.org/ - VERSION:=$(PKG_RELEASE) -endef - -define Package/base-files-network/description - This package contains the network system scripts for OpenWrt. -endef - -define Build/Prepare - mkdir -p $(PKG_BUILD_DIR) -endef - -define Build/Compile - -endef - -define Package/base-files-network/install - $(CP) ./files/* $(1)/ -endef - - -$(eval $(call BuildPackage,base-files-network)) - diff --git a/package/base-files-network/files/etc/hotplug.d/iface/00-netstate b/package/base-files-network/files/etc/hotplug.d/iface/00-netstate deleted file mode 100644 index 37b1e934e..000000000 --- a/package/base-files-network/files/etc/hotplug.d/iface/00-netstate +++ /dev/null @@ -1,5 +0,0 @@ -[ ifup = "$ACTION" ] && { - uci_toggle_state network "$INTERFACE" up 1 - uci_toggle_state network "$INTERFACE" connect_time $(sed -ne 's![^0-9].*$!!p' /proc/uptime) - [ -n "$DEVICE" ] && uci_toggle_state network "$INTERFACE" ifname "$DEVICE" -} diff --git a/package/base-files-network/files/etc/hotplug.d/iface/10-routes b/package/base-files-network/files/etc/hotplug.d/iface/10-routes deleted file mode 100644 index d57a5b3c7..000000000 --- a/package/base-files-network/files/etc/hotplug.d/iface/10-routes +++ /dev/null @@ -1,137 +0,0 @@ -add_route() { - local config="$1" - - # is this route intended for the - # $INTERFACE of this hotplug event - config_get interface "$config" interface - [ "$interface" != "$INTERFACE" ] && return 0 - - # get the real interface name from network config - config_get dev "$interface" ifname - - config_get target "$config" target - config_get netmask "$config" netmask - config_get gateway "$config" gateway - config_get metric "$config" metric - config_get mtu "$config" mtu - - # make sure there is a gateway and a target - [ -n "$target" ] || { - echo "Missing target in route section $config" - return 1 - } - [ -n "$gateway" ] || { - config_get gateway "$interface" gateway - } - - # handle "0.0.0.0" as "no gateway given" to allow - # defining gateway-less routes while still keeping - # the possibility to have static routes with a - # proper gateway on interfaces with dynamic ips - [ "$gateway" = "0.0.0.0" ] && gateway="" - - dest="${netmask:+-net "$target" netmask "$netmask"}" - dest="${dest:--host "$target"}" - - /sbin/route add $dest ${gateway:+gw "$gateway"} \ - ${dev:+dev "$dev"} ${metric:+ metric "$metric"} \ - ${mtu:+mss "$mtu"} -} - -add_route6() { - local config="$1" - - # is this route intended for the - # $INTERFACE of this hotplug event - config_get interface "$config" interface - [ "$interface" != "$INTERFACE" ] && return 0 - - # get the real interface name from network config - config_get dev "$interface" ifname - - config_get target "$config" target - config_get gateway "$config" gateway - config_get metric "$config" metric - config_get mtu "$config" mtu - - # make sure there is a gateway and a target - [ -n "$target" ] || { - echo "Missing target in route section $config" - return 1 - } - [ -n "$gateway" ] || { - config_get gateway "$interface" gateway - } - - /sbin/route -A inet6 add $target ${gateway:+gw "$gateway"} \ - ${dev:+dev "$dev"} ${metric:+ metric "$metric"} \ - ${mtu:+mss "$mtu"} -} - -# Skip fake devices (e.g. relayd) -grep -qs "^ *$DEVICE:" /proc/net/dev || exit 0 - -case "$ACTION" in - ifup) - include /lib/network - scan_interfaces - - # Setup aliases - config_set "$INTERFACE" aliases "" - config_set "$INTERFACE" alias_count 0 - config_foreach setup_interface_alias alias "$INTERFACE" "$DEVICE" - - # Save alias references in state vars - local aliases - config_get aliases "$INTERFACE" aliases - [ -z "$aliases" ] || uci_toggle_state network "$INTERFACE" aliases "$aliases" - - # Make ip6addr of parent iface the main address again - local ip6addr - config_get ip6addr "$INTERFACE" ip6addr - [ -z "$ip6addr" ] || { - ifconfig "$DEVICE" del "$ip6addr" - ifconfig "$DEVICE" add "$ip6addr" - } - - # Setup sysctls - local proto accept_ra send_rs - - config_get proto "$INTERFACE" proto - if [ "$proto" = dhcp ]; then - accept_ra=1 - send_rs=0 - else - accept_ra=0 - send_rs=1 - fi - - config_get_bool accept_ra "$INTERFACE" accept_ra $accept_ra - [ $accept_ra -eq 0 ] || { - logger -t ifup "Allowing Router Advertisements on $INTERFACE ($DEVICE)" - accept_ra=2 - } - do_sysctl "net.ipv6.conf.$DEVICE.accept_ra" $accept_ra - - config_get_bool send_rs "$INTERFACE" send_rs $send_rs - [ $send_rs -eq 0 ] || { - logger -t ifup "Enabling Router Solicitations on $INTERFACE ($DEVICE)" - send_rs=2 - } - do_sysctl "net.ipv6.conf.$DEVICE.forwarding" $send_rs - - - # Setup routes - config_foreach "add_route" route - config_foreach "add_route6" route6 - ;; - ifdown) - # Bring down named aliases - local device=$(uci_get_state network "$INTERFACE" device) - local ifn - for ifn in $(ifconfig | sed -ne "s/^\(\($DEVICE${device:+\|$device}\|br-$INTERFACE\):[^[:space:]]\+\).*/\1/p"); do - ifconfig "$ifn" down - done - ;; -esac - diff --git a/package/base-files-network/files/etc/hotplug.d/net/10-net b/package/base-files-network/files/etc/hotplug.d/net/10-net deleted file mode 100644 index 013ece39c..000000000 --- a/package/base-files-network/files/etc/hotplug.d/net/10-net +++ /dev/null @@ -1,72 +0,0 @@ -# Copyright (C) 2006 OpenWrt.org - -include /lib/network - -addif() { - # Ensure that ipv6 is loaded, autoloading happens later but ipv6 might be - # required now for interface setup. - [ -d /proc/sys/net/ipv6 ] || { - grep -q '^ipv6' /etc/modules.d/* && insmod ipv6 - } - - # PPP devices are configured by pppd, no need to run setup_interface here - case "$INTERFACE" in - 3g-*|ppp-*|pppoa-*|pppoe-*|pptp-*) return 0;; - esac - - scan_interfaces - local cfg="$(find_config "$INTERFACE")" - - case "$INTERFACE" in - # Skip wireless parent interfaces - ath[0-9]|wlan[0-9]) ;; - *) - # check the autoload setting - config_get auto "$cfg" auto - case "$auto" in - 1|on|enabled) setup_interface "$INTERFACE";; - esac - ;; - esac - - # find all vlan configurations for this interface and set them up as well - for ifc in $interfaces; do - config_get iftype "$ifc" type - config_get ifs "$ifc" device - for dev in $ifs; do - [ "${dev%%\.*}" = "$INTERFACE" -a "$dev" != "$INTERFACE" ] && { - add_vlan "$dev" - } - done - done -} - - -delif() { - scan_interfaces - - # find all vlan configurations for this interface and nuke 'em - for ifc in $interfaces; do - config_get iftype "$ifc" type - config_get ifs "$ifc" device - confdevs="$(uci_get network.$ifc.ifname)" - for dev in $ifs; do - [ "${dev%%\.*}" = "$INTERFACE" ] && { - list_contains confdevs "$dev" || list_remove ifs "$dev" - } - done - uci_set_state "network" "$ifc" device "$ifs" - done -} - -case "$ACTION" in - add|register) - case "$PHYSDEVDRIVER" in - natsemi) sleep 1;; - esac - addif - ;; - remove|unregister) - delif - ;; -esac diff --git a/package/base-files-network/files/etc/init.d/network b/package/base-files-network/files/etc/init.d/network deleted file mode 100755 index ad73e6037..000000000 --- a/package/base-files-network/files/etc/init.d/network +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2006-2011 OpenWrt.org - -START=40 -STOP=90 - -boot() { - setup_switch() { return 0; } - - include /lib/network - setup_switch - - grep -qs config /etc/config/wireless && { - /sbin/wifi up - } - - scan_interfaces - - local ifc - for ifc in $interfaces; do - local proto - config_get proto "$ifc" proto - - local auto - config_get_bool auto "$ifc" auto 1 - - type "coldplug_interface_$proto" >/dev/null && [ "$auto" = 1 ] && \ - coldplug_interface_$proto "$ifc" - done -} - -start() { - setup_switch() { return 0; } - - include /lib/network - setup_switch - ifup -a - /sbin/wifi up -} - -stop() { - ifdown -a -} - -restart() { - start -} diff --git a/package/base-files-network/files/lib/network/config.sh b/package/base-files-network/files/lib/network/config.sh deleted file mode 100755 index 8ba31a878..000000000 --- a/package/base-files-network/files/lib/network/config.sh +++ /dev/null @@ -1,467 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006-2011 OpenWrt.org - -# DEBUG="echo" - -. /lib/functions/service.sh - -do_sysctl() { - [ -n "$2" ] && \ - sysctl -n -e -w "$1=$2" >/dev/null || \ - sysctl -n -e "$1" -} - -map_sysctls() { - local cfg="$1" - local ifn="$2" - - local fam - for fam in ipv4 ipv6; do - if [ -d /proc/sys/net/$fam ]; then - local key - for key in /proc/sys/net/$fam/*/$ifn/*; do - local val - config_get val "$cfg" "${fam}_${key##*/}" - [ -n "$val" ] && echo -n "$val" > "$key" - done - fi - done -} - -find_config() { - local iftype device iface ifaces ifn - for ifn in $interfaces; do - config_get iftype "$ifn" type - config_get iface "$ifn" ifname - case "$iftype" in - bridge) config_get ifaces "$ifn" ifnames;; - esac - config_get device "$ifn" device - for ifc in $device $iface $ifaces; do - [ ."$ifc" = ."$1" ] && { - echo "$ifn" - return 0 - } - done - done - - return 1; -} - -fixup_interface() { - local iftype ifname device proto - local __cfg="$1" - - config_get iftype "$__cfg" TYPE - case "$iftype" in - interface) - append interfaces "$__cfg" - config_get proto "$__cfg" proto - config_get iftype "$__cfg" type - config_get ifname "$__cfg" ifname - config_get device "$__cfg" device "$ifname" - config_set "$__cfg" device "$device" - case "$iftype" in - bridge) - config_set "$__cfg" ifnames "$device" - config_set "$__cfg" ifname br-"$CONFIG_SECTION" - ;; - esac - ( type "scan_$proto" ) >/dev/null 2>/dev/null && eval "scan_$proto '$__cfg'" - ;; - esac -} - -scan_interfaces() { - local cfgfile="${1:-network}" - interfaces= - config_cb() { - case "$1" in - interface) - config_set "$2" auto 1 - ;; - esac - fixup_interface "$CONFIG_SECTION" - } - config_load "${cfgfile}" -} - -add_vlan() { - local vif="${1%\.*}" - - [ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || { - ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif" - $DEBUG vconfig set_name_type DEV_PLUS_VID_NO_PAD - $DEBUG vconfig add "$vif" "${1##*\.}" - return 0 - } - return 1 -} - -# add dns entries if they are not in resolv.conf yet -add_dns() { - local cfg="$1"; shift - - remove_dns "$cfg" - - # We may be called by pppd's ip-up which has a nonstandard umask set. - # Create an empty file here and force its permission to 0644, otherwise - # dnsmasq will not be able to re-read the resolv.conf.auto . - [ ! -f /tmp/resolv.conf.auto ] && { - touch /tmp/resolv.conf.auto - chmod 0644 /tmp/resolv.conf.auto - } - - local dns - local add - for dns in "$@"; do - grep -qsE "^nameserver ${dns//./\\.}$" /tmp/resolv.conf.auto || { - add="${add:+$add }$dns" - echo "nameserver $dns" >> /tmp/resolv.conf.auto - } - done - - [ -n "$cfg" ] && { - uci_toggle_state network "$cfg" dns "$add" - uci_toggle_state network "$cfg" resolv_dns "$add" - } -} - -# remove dns entries of the given iface -remove_dns() { - local cfg="$1" - - [ -n "$cfg" ] && { - [ -f /tmp/resolv.conf.auto ] && { - local dns=$(uci_get_state network "$cfg" resolv_dns) - for dns in $dns; do - sed -i -e "/^nameserver ${dns//./\\.}$/d" /tmp/resolv.conf.auto - done - } - - uci_revert_state network "$cfg" dns - uci_revert_state network "$cfg" resolv_dns - } -} - -# sort the device list, drop duplicates -sort_list() { - local arg="$*" - ( - for item in $arg; do - echo "$item" - done - ) | sort -u -} - -prepare_interface_bridge() { - return 0 -} - -# Create the interface, if necessary. -# Return status 0 indicates that the setup_interface() call should continue -# Return status 1 means that everything is set up already. - -prepare_interface() { - local iface="$1" - local config="$2" - local macaddr="$3" - - # if we're called for the bridge interface itself, don't bother trying - # to create any interfaces here. The scripts have already done that, otherwise - # the bridge interface wouldn't exist. - [ "br-$config" = "$iface" -o -e "$iface" ] && return 0; - - ifconfig "$iface" 2>/dev/null >/dev/null && { - local proto - config_get proto "$config" proto - - # make sure the interface is removed from any existing bridge and deconfigured, - # (deconfigured only if the interface is not set to proto=none) - unbridge "$iface" - - local mtu macaddr txqueuelen - config_get mtu "$config" mtu - [ -n "$macaddr" ] || config_get macaddr "$config" macaddr - config_get txqueuelen "$config" txqueuelen - [ -n "$macaddr" ] && $DEBUG ifconfig "$iface" down - $DEBUG ifconfig "$iface" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} ${txqueuelen:+txqueuelen $txqueuelen} up - - [ "$proto" = none ] || ifconfig "$iface" 0.0.0.0 - - # Apply sysctl settings - map_sysctls "$config" "$iface" - } - - # Setup VLAN interfaces - add_vlan "$iface" && return 1 - ifconfig "$iface" 2>/dev/null >/dev/null || return 0 - - # Setup bridging - local iftype - config_get iftype "$config" type - case "$iftype" in - bridge) - local macaddr - config_get macaddr "$config" macaddr - [ -x /usr/sbin/brctl ] && { - ifconfig "br-$config" 2>/dev/null >/dev/null && { - local newdevs devices - config_get devices "$config" device - for dev in $(sort_list "$devices" "$iface"); do - append newdevs "$dev" - done - uci_toggle_state network "$config" device "$newdevs" - $DEBUG ifconfig "$iface" 0.0.0.0 - $DEBUG do_sysctl "net.ipv6.conf.$iface.disable_ipv6" 1 - $DEBUG brctl addif "br-$config" "$iface" - # Bridge existed already. No further processing necesary - } || { - local stp igmp_snooping - config_get_bool stp "$config" stp 0 - config_get_bool igmp_snooping "$config" igmp_snooping 1 - $DEBUG brctl addbr "br-$config" - $DEBUG brctl setfd "br-$config" 0 - $DEBUG ifconfig "$iface" 0.0.0.0 - $DEBUG do_sysctl "net.ipv6.conf.$iface.disable_ipv6" 1 - $DEBUG brctl addif "br-$config" "$iface" - $DEBUG brctl stp "br-$config" $stp - [ -z "$macaddr" ] && macaddr="$(cat /sys/class/net/$iface/address)" - [ -e /sys/devices/virtual/net/br-$config/bridge/multicast_snooping ] && \ - echo $igmp_snooping > /sys/devices/virtual/net/br-$config/bridge/multicast_snooping - $DEBUG ifconfig "br-$config" hw ether $macaddr up - # Creating the bridge here will have triggered a hotplug event, which will - # result in another setup_interface() call, so we simply stop processing - # the current event at this point. - } - ifconfig "$iface" ${macaddr:+hw ether "${macaddr}"} up 2>/dev/null >/dev/null - return 1 - } - ;; - esac - return 0 -} - -set_interface_ifname() { - local config="$1" - local ifname="$2" - - local device - config_get device "$1" device - uci_toggle_state network "$config" ifname "$ifname" - uci_toggle_state network "$config" device "$device" -} - -setup_interface_none() { - env -i ACTION="ifup" INTERFACE="$2" DEVICE="$1" PROTO=none /sbin/hotplug-call "iface" & -} - -setup_interface_static() { - local iface="$1" - local config="$2" - - local ipaddr netmask ip6addr - config_get ipaddr "$config" ipaddr - config_get netmask "$config" netmask - config_get ip6addr "$config" ip6addr - [ -z "$ipaddr" -o -z "$netmask" ] && [ -z "$ip6addr" ] && return 1 - - local gateway ip6gw dns bcast metric - config_get gateway "$config" gateway - config_get ip6gw "$config" ip6gw - config_get dns "$config" dns - config_get bcast "$config" broadcast - config_get metric "$config" metric - - case "$ip6addr" in - */*) ;; - *:*) ip6addr="$ip6addr/64" ;; - esac - - [ -z "$ipaddr" ] || $DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask" broadcast "${bcast:-+}" - [ -z "$ip6addr" ] || $DEBUG ifconfig "${iface%:*}" add "$ip6addr" - [ -z "$gateway" ] || $DEBUG route add default gw "$gateway" ${metric:+metric $metric} dev "$iface" - [ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw" ${metric:+metric $metric} dev "${iface%:*}" - [ -z "$dns" ] || add_dns "$config" $dns - - config_get type "$config" TYPE - [ "$type" = "alias" ] && return 0 - - env -i ACTION="ifup" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug-call "iface" & -} - -setup_interface_alias() { - local config="$1" - local parent="$2" - local iface="$3" - - local cfg - config_get cfg "$config" interface - [ "$parent" == "$cfg" ] || return 0 - - # parent device and ifname - local p_device p_type - config_get p_device "$cfg" device - config_get p_type "$cfg" type - - # select alias ifname - local layer use_iface - config_get layer "$config" layer 2 - case "$layer:$p_type" in - # layer 3: e.g. pppoe-wan or pptp-vpn - 3:*) use_iface="$iface" ;; - - # layer 2 and parent is bridge: e.g. br-wan - 2:bridge) use_iface="br-$cfg" ;; - - # layer 1: e.g. eth0 or ath0 - *) use_iface="$p_device" ;; - esac - - # alias counter - local ctr - config_get ctr "$parent" alias_count 0 - ctr="$(($ctr + 1))" - config_set "$parent" alias_count "$ctr" - - # alias list - local list - config_get list "$parent" aliases - append list "$config" - config_set "$parent" aliases "$list" - - use_iface="$use_iface:$ctr" - set_interface_ifname "$config" "$use_iface" - - local proto - config_get proto "$config" proto "static" - case "${proto}" in - static) - setup_interface_static "$use_iface" "$config" - ;; - *) - echo "Unsupported type '$proto' for alias config '$config'" - return 1 - ;; - esac -} - -setup_interface() { - local iface="$1" - local config="$2" - local proto="$3" - local vifmac="$4" - - [ -n "$config" ] || { - config=$(find_config "$iface") - [ "$?" = 0 ] || return 1 - } - - prepare_interface "$iface" "$config" "$vifmac" || return 0 - - [ "$iface" = "br-$config" ] && { - # need to bring up the bridge and wait a second for - # it to switch to the 'forwarding' state, otherwise - # it will lose its routes... - ifconfig "$iface" up - sleep 1 - } - - # Interface settings - set_interface_ifname "$config" "$iface" - - [ -n "$proto" ] || config_get proto "$config" proto - case "$proto" in - static) - setup_interface_static "$iface" "$config" - ;; - dhcp) - # kill running udhcpc instance - local pidfile="/var/run/dhcp-${iface}.pid" - - SERVICE_PID_FILE="$pidfile" \ - service_stop /sbin/udhcpc - - local ipaddr netmask hostname proto1 clientid vendorid broadcast reqopts - config_get ipaddr "$config" ipaddr - config_get netmask "$config" netmask - config_get hostname "$config" hostname - config_get proto1 "$config" proto - config_get clientid "$config" clientid - config_get vendorid "$config" vendorid - config_get_bool broadcast "$config" broadcast 0 - config_get reqopts "$config" reqopts - - [ -z "$ipaddr" ] || \ - $DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"} - - # additional request options - local opt dhcpopts daemonize - for opt in $reqopts; do - append dhcpopts "-O $opt" - done - - # don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp) - [ "$proto1" != "$proto" ] && { - append dhcpopts "-n -q" - } || { - append dhcpopts "-O rootpath -R" - daemonize=1 - } - [ "$broadcast" = 1 ] && broadcast="-O broadcast" || broadcast= - - SERVICE_DAEMONIZE=$daemonize \ - SERVICE_PID_FILE="$pidfile" \ - service_start /sbin/udhcpc -t 0 -i "$iface" \ - ${ipaddr:+-r $ipaddr} \ - ${hostname:+-H $hostname} \ - ${clientid:+-c $clientid} \ - ${vendorid:+-V $vendorid} \ - -b -p "$pidfile" $broadcast \ - ${dhcpopts} - ;; - none) - setup_interface_none "$iface" "$config" - ;; - *) - if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then - eval "setup_interface_$proto '$iface' '$config' '$proto'" - else - echo "Interface type $proto not supported." - return 1 - fi - ;; - esac -} - -stop_interface_dhcp() { - local config="$1" - - local ifname - config_get ifname "$config" ifname - - local lock="/var/lock/dhcp-${ifname}" - [ -f "$lock" ] && lock -u "$lock" - - remove_dns "$config" - - SERVICE_PID_FILE="/var/run/dhcp-${ifname}.pid" \ - service_stop /sbin/udhcpc - - uci -P /var/state revert "network.$config" -} - -unbridge() { - local dev="$1" - local brdev - - [ -x /usr/sbin/brctl ] || return 0 - brctl show 2>/dev/null | grep "$dev" >/dev/null && { - # interface is still part of a bridge, correct that - - for brdev in $(brctl show | awk '$2 ~ /^[0-9].*\./ { print $1 }'); do - brctl delif "$brdev" "$dev" 2>/dev/null >/dev/null - do_sysctl "net.ipv6.conf.$dev.disable_ipv6" 0 - done - } -} diff --git a/package/base-files-network/files/sbin/ifdown b/package/base-files-network/files/sbin/ifdown deleted file mode 100755 index 1455a9de7..000000000 --- a/package/base-files-network/files/sbin/ifdown +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006-2011 OpenWrt.org - -. /etc/functions.sh -[ $# = 0 ] && { echo " $0 <group>"; exit; } - -case "$1" in - "-a") - [ -e "/tmp/resolv.conf.auto" ] && rm /tmp/resolv.conf.auto - config_cb() { - [ interface != "$1" -o -z "$2" ] || eval "$0 -w $2" - } - config_load network - exit 0 - ;; - "-w") shift ;; -esac - -include /lib/network -scan_interfaces - -cfg=$1 -debug "### ifdown $cfg ###" - -config_get proto "$cfg" proto -[ -z "$proto" ] && { echo "interface not found."; exit; } - -config_get iface "$cfg" device -[ "static" = "$proto" -o "none" = "$proto" ] && { - env -i ACTION="ifdown" INTERFACE="$cfg" DEVICE="$iface" PROTO="$proto" /sbin/hotplug-call "iface" -} - -# call interface stop handler -( type "stop_interface_$proto" ) >/dev/null 2>/dev/null && eval "stop_interface_$proto '$cfg'" - -config_get ifname "$cfg" ifname -config_get device "$cfg" device - -[ ."$device" != ."$ifname" ] || device= -for dev in $ifname $device; do - ifconfig "$dev" 0.0.0.0 down >/dev/null 2>/dev/null -done - -config_get iftype "$cfg" type -[ "bridge" = "$iftype" ] && brctl delbr "$ifname" >/dev/null 2>/dev/null - -# remove the interface's dns entries -remove_dns "$cfg" - -# remove the interface's network state -uci_revert_state network "$1" - -# revert aliases state as well -config_get aliases "$1" aliases -for config in $aliases; do - uci_revert_state network "$config" -done diff --git a/package/base-files-network/files/sbin/ifup b/package/base-files-network/files/sbin/ifup deleted file mode 100755 index 5f8d80dc2..000000000 --- a/package/base-files-network/files/sbin/ifup +++ /dev/null @@ -1,51 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006-2011 OpenWrt.org - -/sbin/ifdown "$@" - -. /etc/functions.sh -[ $# = 0 ] && { echo " $0 <group>"; exit; } - -setup_wifi=1 - -case "$1" in - "-a") - [ -e "/tmp/resolv.conf.auto" ] && rm /tmp/resolv.conf.auto - config_cb() { - [ interface != "$1" -o -z "$2" ] || eval "$0 -w $2" - } - config_load network - exit 0 - ;; - "-w") setup_wifi=0; shift ;; -esac - -if [ $setup_wifi -gt 0 ] && grep -q config /etc/config/wireless; then - find_related_radios() { - local wdev wnet - config_get wdev "$1" device - config_get wnet "$1" network - - if [ -n "$wdev" ] && [ "$wnet" = "$network" ]; then - append radio_devs "$wdev" "$N" - fi - } - - local radio_devs - local network="$1" - config_load wireless - config_foreach find_related_radios wifi-iface - - local dev - for dev in $(echo "$radio_devs" | sort -u); do - /sbin/wifi up "$dev" - done -fi - -include /lib/network -scan_interfaces - -config_get ifname "$1" device -for dev in ${ifname:-$1}; do - setup_interface "$dev" "$1" -done diff --git a/package/base-files-network/files/usr/share/udhcpc/default.script b/package/base-files-network/files/usr/share/udhcpc/default.script deleted file mode 100755 index 8dbff4747..000000000 --- a/package/base-files-network/files/usr/share/udhcpc/default.script +++ /dev/null @@ -1,161 +0,0 @@ -#!/bin/sh -[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1 - -. /etc/functions.sh -include /lib/network -RESOLV_CONF="/tmp/resolv.conf.auto" - -change_state () { - [ -n "$ifc" ] || return - uci_revert_state "$1" "$2" "$3" "$4" - uci_set_state "$1" "$2" "$3" "$4" -} - -set_classless_routes() { - local max=128 - local type - while [ -n "$1" -a -n "$2" -a $max -gt 0 ]; do - [ ${1##*/} -eq 32 ] && type=host || type=net - echo "udhcpc: adding route for $type $1 via $2" - route add -$type "$1" gw "$2" dev "$interface" - max=$(($max-1)) - shift 2 - done -} - -setup_interface () { - local old_ip - local old_broadcast - local old_subnet - local old_router - local old_dns - local user_dns - local user_router - local user_metric - - [ -n "$ifc" ] && { - old_ip="$(uci_get_state network "$ifc" ipaddr)" - old_broadcast="$(uci_get_state network "$ifc" broadcast)" - old_subnet="$(uci_get_state network "$ifc" netmask)" - } - - [ "$ip" != "$old_ip" ] \ - || [ "${broadcast:-+}" != "$old_broadcast" ] \ - || [ "${subnet:-255.255.255.0}" != "$old_subnet" ] && { - echo "udhcpc: ifconfig $interface $ip netmask ${subnet:-255.255.255.0} broadcast ${broadcast:-+}" - ifconfig $interface $ip netmask ${subnet:-255.255.255.0} broadcast ${broadcast:-+} - - change_state network "$ifc" ipaddr "$ip" - change_state network "$ifc" broadcast "${broadcast:-+}" - change_state network "$ifc" netmask "${subnet:-255.255.255.0}" - } - - - # Default Route - [ -n "$ifc" ] && { - change_state network "$ifc" lease_gateway "$router" - old_router="$(uci_get_state network "$ifc" gateway)" - user_router="$(uci_get network "$ifc" gateway)" - user_metric="$(uci_get network "$ifc" metric)" - [ -n "$user_router" ] && router="$user_router" - } - - [ -n "$router" ] && [ "$router" != "0.0.0.0" ] && [ "$router" != "255.255.255.255" ] && [ "$router" != "$old_router" ] && { - echo "udhcpc: setting default routers: $router" - - local valid_gw="" - for i in $router ; do - route add default gw $i ${user_metric:+metric $user_metric} dev $interface - valid_gw="${valid_gw:+$valid_gw|}$i" - done - - eval $(route -n | awk ' - /^0.0.0.0\W{9}('$valid_gw')\W/ {next} - /^0.0.0.0/ {print "route del -net "$1" gw "$2";"} - ') - - change_state network "$ifc" gateway "$router" - } - - # CIDR STATIC ROUTES (rfc3442) - [ -n "$staticroutes" ] && set_classless_routes $staticroutes - [ -n "$msstaticroutes" ] && set_classless_routes $msstaticroutes - - # DNS - old_dns=$(uci_get_state network "$ifc" dns) - old_domain=$(uci_get_state network "$ifc" dnsdomain) - user_dns=$(uci_get "network.$ifc.dns") - [ -n "$user_dns" ] && dns="$user_dns" - - [ -n "$dns" ] && [ "$dns" != "$old_dns" -o -n "$user_dns" ] && { - echo "udhcpc: setting dns servers: $dns" - add_dns "$ifc" $dns - - [ -n "$domain" ] && [ "$domain" != "$old_domain" ] && { - echo "udhcpc: setting dns domain: $domain" - sed -i -e "${old_domain:+/^search $old_domain$/d; }/^search $domain$/d" "${RESOLV_CONF}" - echo "search $domain" >> "${RESOLV_CONF}" - change_state network "$ifc" dnsdomain "$domain" - } - } - - [ -n "$ifc" ] || return - - # UCI State - change_state network "$ifc" lease_server "$serverid" - change_state network "$ifc" lease_acquired "$(sed -ne 's![^0-9].*$!!p' /proc/uptime)" - change_state network "$ifc" lease_lifetime "$lease" - [ -n "$ntpsrv" ] && change_state network "$ifc" lease_ntpsrv "$ntpsrv" - [ -n "$timesvr" ] && change_state network "$ifc" lease_timesrv "$timesvr" - [ -n "$hostname" ] && change_state network "$ifc" lease_hostname "$hostname" - [ -n "$timezone" ] && change_state network "$ifc" lease_timezone "$timezone" - - - # Hotplug - env -i ACTION="$1" INTERFACE="$ifc" DEVICE="$ifname" PROTO=dhcp /sbin/hotplug-call iface -} - - -scan_interfaces -applied= -for ifc in $interfaces __default; do - if [ "$ifc" = __default ]; then - ifc="" - [ -n "$applied" ] && continue - else - config_get ifname "$ifc" ifname - [ "$ifname" = "$interface" ] || continue - - config_get proto "$ifc" proto - [ "$proto" = "dhcp" ] || continue - applied=true - fi - - case "$1" in - deconfig) - ifconfig "$interface" 0.0.0.0 - [ -n "$ifc" ] && { - env -i ACTION="ifdown" INTERFACE="$ifc" DEVICE="$ifname" PROTO=dhcp /sbin/hotplug-call iface - - config_get device "$ifc" device - config_get ifname "$ifc" ifname - config_get aliases "$ifc" aliases - uci_revert_state network "$ifc" - [ -n "$device" ] && uci_set_state network "$ifc" device "$device" - [ -n "$ifname" ] && uci_set_state network "$ifc" ifname "$ifname" - [ -n "$aliases" ] && uci_set_state network "$ifc" aliases "$aliases" - } - ;; - renew) - setup_interface update - ;; - bound) - setup_interface ifup - ;; - esac -done - -# user rules -[ -f /etc/udhcpc.user ] && . /etc/udhcpc.user - -exit 0 |