diff options
Diffstat (limited to 'openwrt')
| -rw-r--r-- | openwrt/package/openwrt/addpattern.c | 221 | ||||
| -rw-r--r-- | openwrt/package/openwrt/openwrt.mk | 132 | ||||
| -rw-r--r-- | openwrt/package/openwrt/trx.c | 334 |
3 files changed, 634 insertions, 53 deletions
diff --git a/openwrt/package/openwrt/addpattern.c b/openwrt/package/openwrt/addpattern.c new file mode 100644 index 000000000..52fb8ee1c --- /dev/null +++ b/openwrt/package/openwrt/addpattern.c @@ -0,0 +1,221 @@ +/* + * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* July 29, 2004 + * + * This is a hacked replacement for the 'addpattern' utility used to + * create wrt54g .bin firmware files. It isn't pretty, but it does + * the job for me. + * + * Extensions: + * -v allows setting the version string on the command line. + * -{0|1} sets the (currently ignored) hw_ver flag in the header + * to 0 or 1 respectively. + */ + +/* January 12, 2005 + * + * Modified by rodent at rodent dot za dot net + * Support added for the new WRT54G v2.2 and WRT54GS v1.1 "flags" + * Without the flags set to 0x7, the above units will refuse to flash. + * + * Extensions: + * -{0|1|2} sets {0|1} sets hw_ver flag to 0/1. {2} sets hw_ver to 1 + * and adds the new hardware "flags" for the v2.2/v1.1 units +*/ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <time.h> +#include <unistd.h> +#include <sys/stat.h> + +/**********************************************************************/ + +#define CODE_ID "U2ND" /* from code_pattern.h */ +#define CODE_PATTERN "W54S" /* from code_pattern.h */ + +#define CYBERTAN_VERSION "v3.37.2" /* from cyutils.h */ + +/* WRT54G v2.2 and WRT54GS v1.1 "flags" (from 3.37.32 firmware cyutils.h) */ +#define SUPPORT_4712_CHIP 0x0001 +#define SUPPORT_INTEL_FLASH 0x0002 +#define SUPPORT_5325E_SWITCH 0x0004 + +struct code_header { /* from cyutils.h */ + char magic[4]; + char res1[4]; /* for extra magic */ + char fwdate[3]; + char fwvern[3]; + char id[4]; /* U2ND */ + char hw_ver; /* 0: for 4702, 1: for 4712 -- new in 2.04.3 */ + unsigned short flags; /* SUPPORT_ flags new for 3.37.2 (WRT54G v2.2 and WRT54GS v1.1) */ + unsigned char res2[10]; +} ; + +/**********************************************************************/ + +void usage(void) __attribute__ (( __noreturn__ )); + +void usage(void) +{ + fprintf(stderr, "Usage: addpattern [-i trxfile] [-o binfile] [-p pattern] [-g] [-v v#.#.#] [-{0|1|2}]\n"); + exit(EXIT_FAILURE); +} + +int main(int argc, char **argv) +{ + char buf[1024]; /* keep this at 1k or adjust garbage calc below */ + struct code_header *hdr; + FILE *in = stdin; + FILE *out = stdout; + char *ifn = NULL; + char *ofn = NULL; + char *pattern = CODE_PATTERN; + char *version = CYBERTAN_VERSION; + int gflag = 0; + int c; + int v0, v1, v2; + size_t off, n; + time_t t; + struct tm *ptm; + + fprintf(stderr, "mjn3's addpattern replacement - v0.81\n"); + + hdr = (struct code_header *) buf; + memset(hdr, 0, sizeof(struct code_header)); + + while ((c = getopt(argc, argv, "i:o:p:gv:012")) != -1) { + switch (c) { + case 'i': + ifn = optarg; + break; + case 'o': + ofn = optarg; + break; + case 'p': + pattern = optarg; + break; + case 'g': + gflag = 1; + break; + case 'v': /* extension to allow setting version */ + version = optarg; + break; + case '0': + hdr->hw_ver = 0; + break; + case '1': + hdr->hw_ver = 1; + break; + case '2': /* new 54G v2.2 and 54GS v1.1 flags */ + hdr->hw_ver = 1; + hdr->flags |= SUPPORT_4712_CHIP; + hdr->flags |= SUPPORT_INTEL_FLASH; + hdr->flags |= SUPPORT_5325E_SWITCH; + break; + + default: + usage(); + } + } + + if (optind != argc) { + fprintf(stderr, "illegal arg \"%s\"\n", argv[optind]); + usage(); + } + + if (strlen(pattern) != 4) { + fprintf(stderr, "illegal pattern \"%s\": length != 4\n", pattern); + usage(); + } + + if (ifn && !(in = fopen(ifn, "r"))) { + fprintf(stderr, "can not open \"%s\" for reading\n", ifn); + usage(); + } + + if (ofn && !(out = fopen(ofn, "w"))) { + fprintf(stderr, "can not open \"%s\" for writing\n", ofn); + usage(); + } + + if (time(&t) == (time_t)(-1)) { + fprintf(stderr, "time call failed\n"); + return EXIT_FAILURE; + } + + ptm = localtime(&t); + + if (3 != sscanf(version, "v%d.%d.%d", &v0, &v1, &v2)) { + fprintf(stderr, "bad version string \"%s\"\n", version); + return EXIT_FAILURE; + } + + memcpy(&hdr->magic, pattern, 4); + hdr->fwdate[0] = ptm->tm_year % 100; + hdr->fwdate[1] = ptm->tm_mon + 1; + hdr->fwdate[2] = ptm->tm_mday; + hdr->fwvern[0] = v0; + hdr->fwvern[1] = v1; + hdr->fwvern[2] = v2; + memcpy(&hdr->id, CODE_ID, strlen(CODE_ID)); + + off = sizeof(struct code_header); + + fprintf(stderr, "writing firmware v%d.%d.%d on %d/%d/%d (y/m/d)\n", + v0, v1, v2, + hdr->fwdate[0], hdr->fwdate[1], hdr->fwdate[2]); + + + while ((n = fread(buf + off, 1, sizeof(buf)-off, in) + off) > 0) { + off = 0; + if (n < sizeof(buf)) { + if (ferror(in)) { + FREAD_ERROR: + fprintf(stderr, "fread error\n"); + return EXIT_FAILURE; + } + if (gflag) { + gflag = sizeof(buf) - n; + memset(buf + n, 0xff, gflag); + fprintf(stderr, "adding %d bytes of garbage\n", gflag); + n = sizeof(buf); + } + } + if (!fwrite(buf, n, 1, out)) { + FWRITE_ERROR: + fprintf(stderr, "fwrite error\n"); + return EXIT_FAILURE; + } + } + + if (ferror(in)) { + goto FREAD_ERROR; + } + + if (fflush(out)) { + goto FWRITE_ERROR; + } + + fclose(in); + fclose(out); + + return EXIT_SUCCESS; +} diff --git a/openwrt/package/openwrt/openwrt.mk b/openwrt/package/openwrt/openwrt.mk index d58a367f1..06d0172a4 100644 --- a/openwrt/package/openwrt/openwrt.mk +++ b/openwrt/package/openwrt/openwrt.mk @@ -1,58 +1,92 @@ ############################################################# # -# openwrt tools +# linksys and openwrt tools # ############################################################# -OPENWRT_SITE=http://openwrt.openbsd-geek.de +LINKSYS_KERNEL_INCLUDE=$(BUILD_DIR)/linksys-kernel -# shared library -OPENWRT_SHARED_SOURCE=openwrt-shared.tar.gz -OPENWRT_SHARED_DIR=$(BUILD_DIR)/openwrt-shared -OPENWRT_SHARED_TARGET_BINARY:=usr/lib/libshared.so +# shared library stuff extracted from linksys firmware GPL sourcetree +# WRT54GS_3_37_2_1109_US +LINKSYS_SHARED_TGZ=linksys-shared.tar.gz +LINKSYS_SHARED_DIR=$(BUILD_DIR)/linksys-shared +LINKSYS_SHARED_TARGET_BINARY:=usr/lib/libshared.so -$(DL_DIR)/$(OPENWRT_SHARED_SOURCE): - $(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_SHARED_SOURCE) +$(DL_DIR)/$(LINKSYS_SHARED_TGZ): + $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_SHARED_TGZ) -$(OPENWRT_SHARED_DIR)/.source: $(DL_DIR)/$(OPENWRT_SHARED_SOURCE) - zcat $(DL_DIR)/$(OPENWRT_SHARED_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - - touch $(OPENWRT_SHARED_DIR)/.source +$(LINKSYS_SHARED_DIR)/.source: $(DL_DIR)/$(LINKSYS_SHARED_TGZ) + zcat $(DL_DIR)/$(LINKSYS_SHARED_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - + touch $(LINKSYS_SHARED_DIR)/.source -$(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY): $(OPENWRT_SHARED_DIR)/.source - $(MAKE) -C $(OPENWRT_SHARED_DIR) -f Makefile-openwrt \ +$(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY): $(LINKSYS_SHARED_DIR)/.source + $(SED) 's/#include.*/#include <cy_conf.h>/g;' $(LINKSYS_SHARED_DIR)/utils.h + $(MAKE) -C $(LINKSYS_SHARED_DIR) -f Makefile-openwrt \ INSTALLDIR=$(TARGET_DIR) \ CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ - CFLAGS="$(TARGET_CFLAGS) -I. -I../binary/include -Wall -I$(OPENWRT_SRCBASE)/" \ + CFLAGS="$(TARGET_CFLAGS) -I$(LINKSYS_KERNEL_INCLUDE)/include \ + -I$(LINKSYS_KERNEL_INCLUDE) -Wall -I." \ install -openwrt-shared: $(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY) +linksys-shared: $(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY) -openwrt-shared-clean: - -$(MAKE) -C $(OPENWRT_SHARED_DIR) clean +linksys-shared-clean: + -$(MAKE) -C $(LINKSYS_SHARED_DIR) clean -# nvram tool -OPENWRT_NVRAM_SOURCE=openwrt-nvram.tar.gz -OPENWRT_NVRAM_DIR=$(BUILD_DIR)/openwrt-nvram -OPENWRT_NVRAM_TARGET_BINARY:=usr/sbin/nvram +# nvram tool extracted from linksys firmware GPL sourcetree +# WRT54GS_3_37_2_1109_US +LINKSYS_NVRAM_TGZ=linksys-nvram.tar.gz +LINKSYS_NVRAM_DIR=$(BUILD_DIR)/linksys-nvram +LINKSYS_NVRAM_TARGET_BINARY:=usr/sbin/nvram -$(DL_DIR)/$(OPENWRT_NVRAM_SOURCE): - $(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_NVRAM_SOURCE) +$(DL_DIR)/$(LINKSYS_NVRAM_TGZ): + $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_NVRAM_TGZ) -$(OPENWRT_NVRAM_DIR)/.source: $(DL_DIR)/$(OPENWRT_NVRAM_SOURCE) - zcat $(DL_DIR)/$(OPENWRT_NVRAM_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - - touch $(OPENWRT_NVRAM_DIR)/.source +$(LINKSYS_NVRAM_DIR)/.source: $(DL_DIR)/$(LINKSYS_NVRAM_TGZ) + zcat $(DL_DIR)/$(LINKSYS_NVRAM_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - + touch $(LINKSYS_NVRAM_DIR)/.source -$(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY): $(OPENWRT_NVRAM_DIR)/.source - $(MAKE) -C $(OPENWRT_NVRAM_DIR) INSTALLDIR=$(TARGET_DIR) \ +$(TARGET_DIR)/$(LINKSYS_NVRAM_TARGET_BINARY): $(LINKSYS_NVRAM_DIR)/.source + $(MAKE) -C $(LINKSYS_NVRAM_DIR) INSTALLDIR=$(TARGET_DIR) \ CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ - CFLAGS="$(TARGET_CFLAGS) -I. -I../binary/include -Wall -DOPENWRT_NVRAM" \ + CFLAGS="$(TARGET_CFLAGS) -I. -I$(LINKSYS_KERNEL_INCLUDE)/include \ + -I$(LINKSYS_KERNEL_INCLUDE) -I$(LINKSYS_SHARED_DIR) -Wall" install + +linksys-nvram: $(TARGET_DIR)/$(LINKSYS_NVRAM_TARGET_BINARY) + +linksys-nvram-clean: + -$(MAKE) -C $(LINKSYS_NVRAM_BUILD_DIR) clean + +# wlconf tool extracted from linksys firmware GPL sourcetree +# WRT54GS_3_37_2_1109_US +LINKSYS_WLCONF_TGZ=linksys-wlconf.tar.gz +LINKSYS_WLCONF_DIR=$(BUILD_DIR)/linksys-wlconf +LINKSYS_WLCONF_TARGET_BINARY:=usr/sbin/wlconf + +$(DL_DIR)/$(LINKSYS_WLCONF_TGZ): + $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_WLCONF_TGZ) + +$(LINKSYS_WLCONF_DIR)/.source: $(DL_DIR)/$(LINKSYS_WLCONF_TGZ) + zcat $(DL_DIR)/$(LINKSYS_WLCONF_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - + touch $(LINKSYS_WLCONF_DIR)/.source + +$(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY): $(LINKSYS_WLCONF_DIR)/.source + $(MAKE) -C $(LINKSYS_WLCONF_DIR) INSTALLDIR=$(TARGET_DIR) \ + CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ + CFLAGS="$(TARGET_CFLAGS) -I. -I$(LINKSYS_KERNEL_INCLUDE)/include \ + -I$(LINKSYS_KERNEL_INCLUDE) \ + -I$(LINKSYS_SHARED_DIR) \ + -I$(LINKSYS_NVRAM_DIR) \ + -Wall -DOPENWRT_WLCONF" \ + LDFLAGS="-lnvram -lshared -L$(BUILD_DIR)/linksys-shared -L$(BUILD_DIR)/linksys-nvram" \ install -openwrt-nvram: $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY) +linksys-wlconf: $(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY) + +linksys-wlconf-clean: + -$(MAKE) -C $(LINKSYS_WLCONF_BUILD_DIR) clean -openwrt-nvram-clean: - -$(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) clean # mtd tool OPENWRT_MTD_SOURCE=package/openwrt/mtd.c @@ -63,32 +97,24 @@ $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY): openwrt-mtd: $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY) -# wlconf tool -OPENWRT_WLCONF_SOURCE=openwrt-wlconf.tar.gz -OPENWRT_WLCONF_DIR=$(BUILD_DIR)/openwrt-wlconf -OPENWRT_WLCONF_TARGET_BINARY:=usr/sbin/wlconf - -$(DL_DIR)/$(OPENWRT_WLCONF_SOURCE): - $(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_WLCONF_SOURCE) +# trx tool +OPENWRT_TRX_SOURCE=package/openwrt/trx.c +OPENWRT_TRX_TARGET=$(BUILD_DIR)/trx -$(OPENWRT_WLCONF_DIR)/.source: $(DL_DIR)/$(OPENWRT_WLCONF_SOURCE) - zcat $(DL_DIR)/$(OPENWRT_WLCONF_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - - touch $(OPENWRT_WLCONF_DIR)/.source +$(OPENWRT_TRX_TARGET): + $(CC) -o $(OPENWRT_TRX_TARGET) $(OPENWRT_TRX_SOURCE) -$(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY): $(OPENWRT_WLCONF_DIR)/.source - $(MAKE) -C $(OPENWRT_WLCONF_DIR) INSTALLDIR=$(TARGET_DIR) \ - CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ - CFLAGS="$(TARGET_CFLAGS) -I. -I../binary/include -I$(BUILD_DIR)/openwrt-shared \ - -I$(BUILD_DIR)/openwrt-nvram -Wall -DOPENWRT_WLCONF" \ - LDFLAGS="-lnvram -lshared -L$(BUILD_DIR)/openwrt-shared -L$(BUILD_DIR)/openwrt-nvram" \ - install +openwrt-trx: $(OPENWRT_TRX_TARGET) -openwrt-wlconf: $(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY) +# addpattern tool +OPENWRT_ADDPATTERN_SOURCE=package/openwrt/addpattern.c +OPENWRT_ADDPATTERN_TARGET=$(BUILD_DIR)/addpattern -openwrt-wlconf-clean: - -$(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) clean +$(OPENWRT_ADDPATTERN_TARGET): + $(CC) -o $(OPENWRT_ADDPATTERN_TARGET) $(OPENWRT_ADDPATTERN_SOURCE) +openwrt-addpattern: $(OPENWRT_ADDPATTERN_TARGET) -openwrt: openwrt-shared openwrt-nvram openwrt-mtd openwrt-wlconf +openwrt: linksys-shared linksys-nvram linksys-wlconf openwrt-mtd openwrt-trx openwrt-addpattern diff --git a/openwrt/package/openwrt/trx.c b/openwrt/package/openwrt/trx.c new file mode 100644 index 000000000..f029dc5fb --- /dev/null +++ b/openwrt/package/openwrt/trx.c @@ -0,0 +1,334 @@ +/* + * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* July 29, 2004 + * + * This is a hacked replacement for the 'trx' utility used to create + * wrt54g .trx firmware files. It isn't pretty, but it does the job + * for me. + * + * As an extension, you can specify a larger maximum length for the + * .trx file using '-m'. It will be rounded up to be a multiple of 4K. + * NOTE: This space will be malloc()'d. + * + * August 16, 2004 + * + * Sigh... Make it endian-neutral. + * + * TODO: Support '-b' option to specify offsets for each file. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stddef.h> +#include <stdint.h> +#include <string.h> +#include <errno.h> +#include <unistd.h> +#include <endian.h> +#include <byteswap.h> + +#if __BYTE_ORDER == __BIG_ENDIAN +#define STORE32_LE(X) bswap_32(X) +#elif __BYTE_ORDER == __LITTLE_ENDIAN +#define STORE32_LE(X) (X) +#else +#error unkown endianness! +#endif + +uint32_t crc32buf(char *buf, size_t len); + +/**********************************************************************/ +/* from trxhdr.h */ + +#define TRX_MAGIC 0x30524448 /* "HDR0" */ +#define TRX_VERSION 1 +#define TRX_MAX_LEN 0x3A0000 +#define TRX_NO_HEADER 1 /* Do not write TRX header */ + +struct trx_header { + uint32_t magic; /* "HDR0" */ + uint32_t len; /* Length of file including header */ + uint32_t crc32; /* 32-bit CRC from flag_version to end of file */ + uint32_t flag_version; /* 0:15 flags, 16:31 version */ + uint32_t offsets[3]; /* Offsets of partitions from start of header */ +}; + +/**********************************************************************/ + +void usage(void) __attribute__ (( __noreturn__ )); + +void usage(void) +{ + fprintf(stderr, "Usage: trx [-o outfile] [-m maxlen] file [file [file]]\n"); + exit(EXIT_FAILURE); +} + +int main(int argc, char **argv) +{ + FILE *out = stdout; + FILE *in; + char *ofn = NULL; + char *buf; + char *e; + int c, i; + size_t n; + uint32_t cur_len; + unsigned long maxlen = TRX_MAX_LEN; + struct trx_header *p; + + fprintf(stderr, "mjn3's trx replacement - v0.81\n"); + + while ((c = getopt(argc, argv, "o:m:")) != -1) { + switch (c) { + case 'o': + ofn = optarg; + break; + case 'm': + errno = 0; + maxlen = strtoul(optarg, &e, 0); + if (errno || (e == optarg) || *e) { + fprintf(stderr, "illegal numeric string\n"); + usage(); + } +#undef ROUND +#define ROUND 0x1000 + if (maxlen & (ROUND-1)) { + maxlen += (ROUND - (maxlen & (ROUND-1))); + } + if (maxlen < ROUND) { + fprintf(stderr, "maxlen too small (or wrapped)\n"); + usage(); + } + break; + default: + usage(); + } + } + + if (ofn && !(out = fopen(ofn, "w"))) { + fprintf(stderr, "can not open \"%s\" for writing\n", ofn); + usage(); + } + + if (optind == argc) { + fprintf(stderr, "we require at least one arg\n"); + usage(); + } + + if (argc - optind > 3) { + fprintf(stderr, "too many args: %d > 3\n", argc - optind); + usage(); + } + + if (maxlen > TRX_MAX_LEN) { + fprintf(stderr, "WARNING: maxlen exceeds default maximum! Beware of overwriting nvram!\n"); + } + + if (!(buf = malloc(maxlen))) { + fprintf(stderr, "malloc failed\n"); + return EXIT_FAILURE; + } + + p = (struct trx_header *) buf; + + p->magic = STORE32_LE(TRX_MAGIC); + cur_len = sizeof(struct trx_header); + p->flag_version = STORE32_LE((TRX_VERSION << 16)); + + i = 0; + + while (optind < argc) { + p->offsets[i++] = STORE32_LE(cur_len); + + if (!(in = fopen(argv[optind], "r"))) { + fprintf(stderr, "can not open \"%s\" for reading\n", argv[optind]); + usage(); + } + + n = fread(buf + cur_len, 1, maxlen - cur_len, in); + if (!feof(in)) { + fprintf(stderr, "fread failure or file \"%s\" too large\n", + argv[optind]); + fclose(in); + return EXIT_FAILURE; + } + + fclose(in); + + ++optind; + + if (optind < argc) { +#undef ROUND +#define ROUND 4 + if (n & (ROUND-1)) { + memset(buf + cur_len + n, 0, ROUND - (n & (ROUND-1))); + n += ROUND - (n & (ROUND-1)); + } + } + + cur_len += n; + } + +#undef ROUND +#define ROUND 0x1000 + n = cur_len & (ROUND-1); + if (n) { + memset(buf + cur_len, 0, ROUND - n); + cur_len += ROUND - n; + } + + p->crc32 = crc32buf((char *) &p->flag_version, + cur_len - offsetof(struct trx_header, flag_version)); + p->crc32 = STORE32_LE(p->crc32); + + p->len = STORE32_LE(cur_len); + + if (!fwrite(buf, cur_len, 1, out) || fflush(out)) { + fprintf(stderr, "fwrite failed\n"); + return EXIT_FAILURE; + } + + fclose(out); + + return EXIT_SUCCESS; +} + +/**********************************************************************/ +/* The following was grabbed and tweaked from the old snippets collection + * of public domain C code. */ + +/**********************************************************************\ +|* Demonstration program to compute the 32-bit CRC used as the frame *| +|* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71 *| +|* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level *| +|* protocol). The 32-bit FCS was added via the Federal Register, *| +|* 1 June 1982, p.23798. I presume but don't know for certain that *| +|* this polynomial is or will be included in CCITT V.41, which *| +|* defines the 16-bit CRC (often called CRC-CCITT) polynomial. FIPS *| +|* PUB 78 says that the 32-bit FCS reduces otherwise undetected *| +|* errors by a factor of 10^-5 over 16-bit FCS. *| +\**********************************************************************/ + +/* Copyright (C) 1986 Gary S. Brown. You may use this program, or + code or tables extracted from it, as desired without restriction.*/ + +/* First, the polynomial itself and its table of feedback terms. The */ +/* polynomial is */ +/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */ +/* Note that we take it "backwards" and put the highest-order term in */ +/* the lowest-order bit. The X^32 term is "implied"; the LSB is the */ +/* X^31 term, etc. The X^0 term (usually shown as "+1") results in */ +/* the MSB being 1. */ + +/* Note that the usual hardware shift register implementation, which */ +/* is what we're using (we're merely optimizing it by doing eight-bit */ +/* chunks at a time) shifts bits into the lowest-order term. In our */ +/* implementation, that means shifting towards the right. Why do we */ +/* do it this way? Because the calculated CRC must be transmitted in */ +/* order from highest-order term to lowest-order term. UARTs transmit */ +/* characters in order from LSB to MSB. By storing the CRC this way, */ +/* we hand it to the UART in the order low-byte to high-byte; the UART */ +/* sends each low-bit to hight-bit; and the result is transmission bit */ +/* by bit from highest- to lowest-order term without requiring any bit */ +/* shuffling on our part. Reception works similarly. */ + +/* The feedback terms table consists of 256, 32-bit entries. Notes: */ +/* */ +/* 1. The table can be generated at runtime if desired; code to do so */ +/* is shown later. It might not be obvious, but the feedback */ +/* terms simply represent the results of eight shift/xor opera- */ +/* tions for all combinations of data and CRC register values. */ +/* */ +/* 2. The CRC accumulation logic is the same for all CRC polynomials, */ +/* be they sixteen or thirty-two bits wide. You simply choose the */ +/* appropriate table. Alternatively, because the table can be */ +/* generated at runtime, you can start by generating the table for */ +/* the polynomial in question and use exactly the same "updcrc", */ +/* if your application needn't simultaneously handle two CRC */ +/* polynomials. (Note, however, that XMODEM is strange.) */ +/* */ +/* 3. For 16-bit CRCs, the table entries need be only 16 bits wide; */ +/* of course, 32-bit entries work OK if the high 16 bits are zero. */ +/* */ +/* 4. The values must be right-shifted by eight bits by the "updcrc" */ +/* logic; the shift must be unsigned (bring in zeroes). On some */ +/* hardware you could probably optimize the shift in assembler by */ +/* using byte-swap instructions. */ + +static const uint32_t crc_32_tab[] = { /* CRC polynomial 0xedb88320 */ +0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f, +0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, +0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2, +0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, +0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, +0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, +0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c, +0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59, +0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, +0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, +0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106, +0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433, +0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, +0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, +0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950, +0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65, +0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7, +0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, +0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, +0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, +0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81, +0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, +0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84, +0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, +0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, +0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, +0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e, +0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b, +0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, +0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, +0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28, +0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d, +0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f, +0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, +0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242, +0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777, +0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69, +0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, +0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, +0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, +0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693, +0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, +0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d +}; + +#define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8)) + +uint32_t crc32buf(char *buf, size_t len) +{ + uint32_t crc; + + crc = 0xFFFFFFFF; + + for ( ; len; --len, ++buf) + { + crc = UPDC32(*buf, crc); + } + + return crc; +} |