diff options
Diffstat (limited to 'openwrt/target/linux/linux-2.6/patches/brcm')
| -rw-r--r-- | openwrt/target/linux/linux-2.6/patches/brcm/002-diag_led.patch | 288 |
1 files changed, 0 insertions, 288 deletions
diff --git a/openwrt/target/linux/linux-2.6/patches/brcm/002-diag_led.patch b/openwrt/target/linux/linux-2.6/patches/brcm/002-diag_led.patch deleted file mode 100644 index a0f36e669..000000000 --- a/openwrt/target/linux/linux-2.6/patches/brcm/002-diag_led.patch +++ /dev/null @@ -1,288 +0,0 @@ -diff -Nur linux-2.6.12.5/drivers/net/Kconfig linux-2.6.12.5-diag/drivers/net/Kconfig ---- linux-2.6.12.5/drivers/net/Kconfig 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-diag/drivers/net/Kconfig 2005-09-10 23:08:53.209908656 +0200 -@@ -41,6 +41,11 @@ - Instead of 'dummy', the devices will then be called 'dummy0', - 'dummy1' etc. - -+config DIAG_LED -+ tristate "Led driver for Broadcom BCM97xx" -+ ---help--- -+ Say m if you like the led to signal status of operation. -+ - config BONDING - tristate "Bonding driver support" - depends on NETDEVICES -diff -Nur linux-2.6.12.5/drivers/net/Makefile linux-2.6.12.5-diag/drivers/net/Makefile ---- linux-2.6.12.5/drivers/net/Makefile 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-diag/drivers/net/Makefile 2005-09-08 17:49:02.249278160 +0200 -@@ -1,6 +1,7 @@ - # - # Makefile for the Linux network (ethercard) device drivers. - # -+obj-$(CONFIG_DIAG_LED) += diag/ - - ifeq ($(CONFIG_ISDN_PPP),y) - obj-$(CONFIG_ISDN) += slhc.o -diff -Nur linux-2.6.12.5/drivers/net/diag/Makefile linux-2.6.12.5-diag/drivers/net/diag/Makefile ---- linux-2.6.12.5/drivers/net/diag/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-diag/drivers/net/diag/Makefile 2005-09-10 19:45:26.596290216 +0200 -@@ -0,0 +1,5 @@ -+#$Id$ -+ -+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER -+ -+obj-$(CONFIG_DIAG_LED) += diag.o -diff -Nur linux-2.6.12.5/drivers/net/diag/diag.c linux-2.6.12.5-diag/drivers/net/diag/diag.c ---- linux-2.6.12.5/drivers/net/diag/diag.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-diag/drivers/net/diag/diag.c 2005-09-10 18:51:02.727849016 +0200 -@@ -0,0 +1,249 @@ -+/* -+ * diag_led.c - replacement diag module -+ * -+ * Copyright (C) 2004 Mike Baker, -+ * Imre Kaloz <kaloz@dune.hu> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * $Id$ -+ */ -+ -+/* -+ * ChangeLog: -+ * 2004/03/28 initial release -+ * 2004/08/26 asus & buffalo support added -+ * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added -+ * 2005/04/13 added licensing informations -+ * 2005/04/18 base reset polarity off initial readings -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/sysctl.h> -+#include <asm/io.h> -+#include <typedefs.h> -+#include <bcmdevs.h> -+#include <sbutils.h> -+ -+extern char * nvram_get(const char *name); -+static void *sbh; -+ -+// v2.x - - - - - -+#define DIAG_GPIO (1<<1) -+#define DMZ_GPIO (1<<7) -+ -+/* -+static void set_gpio(uint32 mask, uint32 value) { -+ sb_gpiocontrol(sbh,mask,0); -+ sb_gpioouten(sbh,mask,mask); -+ sb_gpioout(sbh,mask,value); -+} -+ -+static void v2_set_diag(u8 state) { -+ set_gpio(DIAG_GPIO,state); -+} -+static void v2_set_dmz(u8 state) { -+ set_gpio(DMZ_GPIO,state); -+} -+*/ -+ -+/* -+// v1.x - - - - - -+#define LED_DIAG 0x13 -+#define LED_DMZ 0x12 -+ -+static void v1_set_diag(u8 state) { -+ if (!state) { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF; -+ } else { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG); -+ } -+} -+static void v1_set_dmz(u8 state) { -+ if (!state) { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF; -+ } else { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ); -+ } -+} -+*/ -+ -+// - - - - - -+static void ignore(u8 ignored) {}; -+ -+// - - - - - -+#define BIT_DMZ 0x01 -+#define BIT_DIAG 0x04 -+ -+void (*set_diag)(u8 state); -+void (*set_dmz)(u8 state); -+ -+static unsigned int diag = 0; -+ -+static void diag_change() -+{ -+ set_diag(0xFF); // off -+ set_dmz(0xFF); // off -+ -+ if(diag & BIT_DIAG) -+ set_diag(0x00); // on -+ if(diag & BIT_DMZ) -+ set_dmz(0x00); // on -+} -+ -+static int proc_diag(ctl_table *table, int write, struct file *filp, -+ void *buffer, size_t *lenp, loff_t *ppos) -+{ -+ int r; -+ r = proc_dointvec(table, write, filp, buffer, lenp, ppos); -+ if (write && !r) { -+ diag_change(); -+ } -+ return r; -+} -+ -+// - - - - - -+static unsigned char reset_gpio = 0; -+static unsigned char reset_polarity = 0; -+static unsigned int reset = 0; -+ -+static int proc_reset(ctl_table *table, int write, struct file *filp, -+ void *buffer, size_t *lenp, loff_t *ppos) -+{ -+ -+ if (reset_gpio) { -+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio); -+ sb_gpioouten(sbh,reset_gpio,0); -+ reset=!(sb_gpioin(sbh)&reset_gpio); -+ -+ if (reset_polarity) reset=!reset; -+ } else { -+ reset=0; -+ } -+ -+ return proc_dointvec(table, write, filp, buffer, lenp, ppos); -+} -+ -+// - - - - - -+static struct ctl_table_header *diag_sysctl_header; -+ -+static ctl_table sys_diag[] = { -+ { -+ ctl_name: 2000, -+ procname: "diag", -+ data: &diag, -+ maxlen: sizeof(diag), -+ mode: 0644, -+ proc_handler: proc_diag -+ }, -+ { -+ ctl_name: 2001, -+ procname: "reset", -+ data: &reset, -+ maxlen: sizeof(reset), -+ mode: 0444, -+ proc_handler: proc_reset -+ }, -+ { 0 } -+}; -+ -+static int __init diag_init() -+{ -+ //char *buf; -+ u32 board_type; -+ sbh = sb_kattach(); -+ sb_gpiosetcore(sbh); -+ -+ board_type = sb_boardtype(sbh); -+ printk(KERN_INFO "diag boardtype: %08x\n",board_type); -+ -+ set_diag=ignore; -+ set_dmz=ignore; -+ -+ /* -+ buf=nvram_get("boardrev"); -+ if (((board_type & 0xf00) == 0x400) && strcmp(buf,"0x10")) { -+ buf=nvram_get("boardtype")?:""; -+ if (!strcmp(buf,"bcm94710dev")) { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ // wrt54g v1.x -+ set_diag=v1_set_diag; -+ set_dmz=v1_set_dmz; -+ reset_gpio=(1<<6); -+ } -+ if (!strcmp(buf,"asusX")) { -+ //asus wl-500g -+ reset_gpio=(1<<6); -+ } -+ } -+ if (!strcmp(buf,"bcm94710ap")) { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ // buffalo -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<4); -+ } -+ if (!strcmp(buf,"44")) { -+ //dell truemobile -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<0); -+ } -+ } -+ } else { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ //linksys -+ set_diag=v2_set_diag; -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<6); -+ } -+ if (!strcmp(buf,"44")) { -+ //motorola -+ reset_gpio=(1<<5); -+ } -+ if (!strcmp(buf,"00")) { -+ //buffalo -+ reset_gpio=(1<<7); -+ } -+ if (!strcmp(buf,"45")) { -+ //wl-500g deluxe -+ reset_gpio=(1<<6); -+ } -+ } -+ -+ */ -+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio); -+ sb_gpioouten(sbh,reset_gpio,0); -+ reset_polarity=!(sb_gpioin(sbh)&reset_gpio); -+ -+ diag_sysctl_header = register_sysctl_table(sys_diag, 0); -+ diag_change(); -+ -+ return 0; -+} -+ -+static void __exit diag_exit() -+{ -+ unregister_sysctl_table(diag_sysctl_header); -+} -+ -+MODULE_AUTHOR("openwrt.org"); -+MODULE_LICENSE("GPL"); -+ -+module_init(diag_init); -+module_exit(diag_exit); |