diff options
Diffstat (limited to 'openwrt/package/wondershaper/patches/wondershaper-OpenWrt.patch')
| -rw-r--r-- | openwrt/package/wondershaper/patches/wondershaper-OpenWrt.patch | 217 |
1 files changed, 0 insertions, 217 deletions
diff --git a/openwrt/package/wondershaper/patches/wondershaper-OpenWrt.patch b/openwrt/package/wondershaper/patches/wondershaper-OpenWrt.patch deleted file mode 100644 index 43d7fb115..000000000 --- a/openwrt/package/wondershaper/patches/wondershaper-OpenWrt.patch +++ /dev/null @@ -1,217 +0,0 @@ -diff -Nur wondershaper-1.1a/wshaper.conf wondershaper-1.1a_openwrt/wshaper.conf ---- wondershaper-1.1a/wshaper.conf 1970-01-01 01:00:00.000000000 +0100 -+++ wondershaper-1.1a_openwrt/wshaper.conf 2005-09-09 00:31:54.239340744 +0200 -@@ -0,0 +1,27 @@ -+# Wonder Shaper -+# please read the README before filling out these values -+# -+# Set the following values to somewhat less than your actual download -+# and uplink speed. In kilobits. -+DOWNLINK=1000 -+UPLINK=220 -+ -+# low priority OUTGOING traffic - you can leave this blank if you want -+# low priority source netmasks -+NOPRIOHOSTSRC=80 -+ -+# low priority destination netmasks -+NOPRIOHOSTDST= -+ -+# low priority source ports -+NOPRIOPORTSRC= -+ -+# low priority destination ports -+NOPRIOPORTDST= -+ -+# WAN device -+DEV=$(nvram get wan_ifname) -+ -+# tc location -+TC=/usr/sbin/tc -+ -diff -Nur wondershaper-1.1a/wshaper.htb wondershaper-1.1a_openwrt/wshaper.htb ---- wondershaper-1.1a/wshaper.htb 2002-04-16 16:26:51.000000000 +0200 -+++ wondershaper-1.1a_openwrt/wshaper.htb 2005-09-11 13:24:56.143626544 +0200 -@@ -1,44 +1,22 @@ --#!/bin/bash -+#!/bin/ash - # Wonder Shaper --# please read the README before filling out these values --# --# Set the following values to somewhat less than your actual download --# and uplink speed. In kilobits. Also set the device that is to be shaped. -- --DOWNLINK=800 --UPLINK=220 --DEV=ppp0 -- --# low priority OUTGOING traffic - you can leave this blank if you want --# low priority source netmasks --NOPRIOHOSTSRC= -- --# low priority destination netmasks --NOPRIOHOSTDST= -+. /etc/functions.sh -+. /etc/wshaper.conf - --# low priority source ports --NOPRIOPORTSRC= - --# low priority destination ports --NOPRIOPORTDST= -- -- --# Now remove the following two lines :-) -- --echo Please read the documentation in 'README' first --exit -+# do the magic - - if [ "$1" = "status" ] - then -- tc -s qdisc ls dev $DEV -- tc -s class ls dev $DEV -+ $TC -s qdisc ls dev $DEV -+ $TC -s class ls dev $DEV - exit - fi - - - # clean existing down- and uplink qdiscs, hide errors --tc qdisc del dev $DEV root 2> /dev/null > /dev/null --tc qdisc del dev $DEV ingress 2> /dev/null > /dev/null -+$TC qdisc del dev $DEV root 2> /dev/null > /dev/null -+$TC qdisc del dev $DEV ingress 2> /dev/null > /dev/null - - if [ "$1" = "stop" ] - then -@@ -46,50 +24,66 @@ - fi - - -+# wondershaper must be executed everytime an interface comes up -+# if we have dynamic interface ppp0 add wondershaper to ip-up -+if [ $DEV = "ppp0" ] && ! grep -q wshaper /etc/ppp/ip-up -+then -+ echo "/usr/sbin/wshaper" >> /etc/ppp/ip-up -+ chmod 755 /etc/ppp/ip-up -+fi -+ -+ -+ -+# load the needed kernel modules -+for module in sch_prio sch_htb sch_sfq sch_ingress cls_tcindex cls_fw cls_route cls_u32 -+do -+ insmod $module 2> /dev/null > /dev/null -+done -+ - ###### uplink - - # install root HTB, point default traffic to 1:20: - --tc qdisc add dev $DEV root handle 1: htb default 20 -+$TC qdisc add dev $DEV root handle 1: htb default 20 - - # shape everything at $UPLINK speed - this prevents huge queues in your - # DSL modem which destroy latency: - --tc class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit burst 6k -+$TC class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit burst 6k - - # high prio class 1:10: - --tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit \ -+$TC class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit \ - burst 6k prio 1 - - # bulk & default class 1:20 - gets slightly less traffic, - # and a lower priority: - --tc class add dev $DEV parent 1:1 classid 1:20 htb rate $[9*$UPLINK/10]kbit \ -+$TC class add dev $DEV parent 1:1 classid 1:20 htb rate $((9*$UPLINK/10))kbit \ - burst 6k prio 2 - --tc class add dev $DEV parent 1:1 classid 1:30 htb rate $[8*$UPLINK/10]kbit \ -+$TC class add dev $DEV parent 1:1 classid 1:30 htb rate $((8*$UPLINK/10))kbit \ - burst 6k prio 2 - - # all get Stochastic Fairness: --tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10 --tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10 --tc qdisc add dev $DEV parent 1:30 handle 30: sfq perturb 10 -+$TC qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10 -+$TC qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10 -+$TC qdisc add dev $DEV parent 1:30 handle 30: sfq perturb 10 - - # TOS Minimum Delay (ssh, NOT scp) in 1:10: - --tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \ -+$TC filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \ - match ip tos 0x10 0xff flowid 1:10 - - # ICMP (ip protocol 1) in the interactive class 1:10 so we - # can do measurements & impress our friends: --tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \ -+$TC filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \ - match ip protocol 1 0xff flowid 1:10 - - # To speed up downloads while an upload is going on, put ACK packets in - # the interactive class: - --tc filter add dev $DEV parent 1: protocol ip prio 10 u32 \ -+$TC filter add dev $DEV parent 1: protocol ip prio 10 u32 \ - match ip protocol 6 0xff \ - match u8 0x05 0x0f at 0 \ - match u16 0x0000 0xffc0 at 2 \ -@@ -101,31 +95,31 @@ - # some traffic however suffers a worse fate - for a in $NOPRIOPORTDST - do -- tc filter add dev $DEV parent 1: protocol ip prio 14 u32 \ -+ $TC filter add dev $DEV parent 1: protocol ip prio 14 u32 \ - match ip dport $a 0xffff flowid 1:30 - done - - for a in $NOPRIOPORTSRC - do -- tc filter add dev $DEV parent 1: protocol ip prio 15 u32 \ -+ $TC filter add dev $DEV parent 1: protocol ip prio 15 u32 \ - match ip sport $a 0xffff flowid 1:30 - done - - for a in $NOPRIOHOSTSRC - do -- tc filter add dev $DEV parent 1: protocol ip prio 16 u32 \ -+ $TC filter add dev $DEV parent 1: protocol ip prio 16 u32 \ - match ip src $a flowid 1:30 - done - - for a in $NOPRIOHOSTDST - do -- tc filter add dev $DEV parent 1: protocol ip prio 17 u32 \ -+ $TC filter add dev $DEV parent 1: protocol ip prio 17 u32 \ - match ip dst $a flowid 1:30 - done - - # rest is 'non-interactive' ie 'bulk' and ends up in 1:20 - --tc filter add dev $DEV parent 1: protocol ip prio 18 u32 \ -+$TC filter add dev $DEV parent 1: protocol ip prio 18 u32 \ - match ip dst 0.0.0.0/0 flowid 1:20 - - -@@ -136,12 +130,12 @@ - # - # attach ingress policer: - --tc qdisc add dev $DEV handle ffff: ingress -+$TC qdisc add dev $DEV handle ffff: ingress - - # filter *everything* to it (0.0.0.0/0), drop everything that's - # coming in too fast: - --tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \ -+$TC filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \ - 0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1 - - |