diff options
Diffstat (limited to 'openwrt/package/linux/kernel-source/include/sbsdram.h')
| -rw-r--r-- | openwrt/package/linux/kernel-source/include/sbsdram.h | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/openwrt/package/linux/kernel-source/include/sbsdram.h b/openwrt/package/linux/kernel-source/include/sbsdram.h deleted file mode 100644 index 1b4c539a8..000000000 --- a/openwrt/package/linux/kernel-source/include/sbsdram.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions. - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * $Id$ - */ - -#ifndef _SBSDRAM_H -#define _SBSDRAM_H - -#ifndef _LANGUAGE_ASSEMBLY - -/* Sonics side: SDRAM core registers */ -typedef volatile struct sbsdramregs { - uint32 initcontrol; /* Generates external SDRAM initialization sequence */ - uint32 config; /* Initializes external SDRAM mode register */ - uint32 refresh; /* Controls external SDRAM refresh rate */ - uint32 pad1; - uint32 pad2; -} sbsdramregs_t; - -#endif - -/* SDRAM initialization control (initcontrol) register bits */ -#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */ -#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */ -#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */ -#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */ -#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */ -#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */ -#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */ -#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */ -#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */ -#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */ -#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */ -#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */ -#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */ - -/* SDRAM configuration (config) register bits */ -#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */ -#define SDRAM_BURST8 0x0001 /* Use burst of 8 */ -#define SDRAM_BURST4 0x0002 /* Use burst of 4 */ -#define SDRAM_BURST2 0x0003 /* Use burst of 2 */ -#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */ -#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */ - -/* SDRAM refresh control (refresh) register bits */ -#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */ -#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */ - -/* SDRAM Core default Init values (OCP ID 0x803) */ -#define SDRAM_INIT MEM4MX16X2 -#define SDRAM_CONFIG SDRAM_BURSTFULL -#define SDRAM_REFRESH SDRAM_REF(0x40) - -#define MEM1MX16 0x009 /* 2 MB */ -#define MEM1MX16X2 0x409 /* 4 MB */ -#define MEM2MX8X2 0x809 /* 4 MB */ -#define MEM2MX8X4 0xc09 /* 8 MB */ -#define MEM2MX32 0x439 /* 8 MB */ -#define MEM4MX16 0x019 /* 8 MB */ -#define MEM4MX16X2 0x419 /* 16 MB */ -#define MEM8MX8X2 0x819 /* 16 MB */ -#define MEM8MX16 0x829 /* 16 MB */ -#define MEM4MX32 0x429 /* 16 MB */ -#define MEM8MX8X4 0xc19 /* 32 MB */ -#define MEM8MX16X2 0xc29 /* 32 MB */ - -#endif /* _SBSDRAM_H */ |