diff options
Diffstat (limited to 'obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd')
4 files changed, 140 insertions, 0 deletions
diff --git a/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/CONTROL/conffiles b/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/CONTROL/conffiles new file mode 100644 index 000000000..70be85a8a --- /dev/null +++ b/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/CONTROL/conffiles @@ -0,0 +1 @@ +/etc/dhcp-fwd.conf diff --git a/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/CONTROL/control b/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/CONTROL/control new file mode 100644 index 000000000..0de535306 --- /dev/null +++ b/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/CONTROL/control @@ -0,0 +1,8 @@ +Package: dhcp-fwd +Priority: optional +Section: net +Version: TBDL +Architecture: TBDL +Maintainer: Nico <nthill@free.fr> +Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/ +Description: a DHCP relay agent diff --git a/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/root/etc/dhcp-fwd.conf b/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/root/etc/dhcp-fwd.conf new file mode 100644 index 000000000..15514e388 --- /dev/null +++ b/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/root/etc/dhcp-fwd.conf @@ -0,0 +1,114 @@ +## $Id$ + +## This file contains a sample configuration for the network shown +## below: +## +## -------------- ---------- ------------- +## | DHCP Server | | | | | +## | 192.168.8.66 |------<eth1>| dhcp-fwd |<eth2>------| Clients | +## | | | | | | +## -------------- ---------- ------------- +## +## By default, the dhcp-fwd agent looks at /etc/dhcp-fwd.conf +## for this file. By using the '-c' option when calling dhcp-fwd, this +## path can be changed. + + +######### ENVIRONMENT SETTINGS ######### +#### +### +## The server will drop its privileges and goes into a chroot-jail +## after doing its initialization. The following parameters are +## defining the needed parameters: + +## User and group names/ids. It can be a numeric id or a resolvable +## alphanumeric-name. +## +## WARNING: when compiled with dietlibc the user-/group-names must be +## resolvable by files-NSS. LDAP or NIS NSS will not work so +## the numeric ids must be used +user daemon +group daemon + +## chroot() path +chroot /var/run/dhcp-fwd + +## Logfile and loglevel. The logfile-location is relatively to the +## directory where dhcp-fwd was started and not to the chroot-directory. +## +## The loglevel option is not supported yet. +logfile /var/log/dhcp-fwd.log +loglevel 1 + +## SysV pidfile; contains the PID of the daemon-process and will be +## written with root-privileges +pidfile /var/run/dhcp-fwd.pid + + +## Set limit for resources. When using much interfaces or servers +## below you will need to increase some values. Same holds when not +## using dietlibc. Use '-1' as the value to disable the upper limit +## for the given resource. +## +## Look into /proc/<pid>/status to find out the real usage of the +## resources. +ulimit core 0 +ulimit stack 64K +ulimit data 32K +ulimit rss 200K +ulimit nproc 0 +ulimit nofile 0 +ulimit as 0 + + +######### INTERFACE SETTINGS ######### +#### +### +## The interface where the forwarder listens for messages. There must +## be specified BOTH the server-side and client-side interfaces! +## +## Each interface will be identified by its system-wide name +## (e.g. eth0). After this it must be told whether there are +## clients and servers, and if it is allowed to send broadcast +## messages to clients. The bcast flags will be IGNORED when +## forwarding messages to servers. + +# IFNAME clients servers bcast +if eth2 true false true +if eth1 false true true + + +## Each interface can be given an RFC 3046 agent ID. The 'name' config +## option sets this value; if an interface is not specified here, the +## IFNAME will be assumed. + +# IFNAME agent-id +name eth2 ws-c + + +## Each interface can be given an specific IP to be filled into the +## 'giaddr' field. +## +## BEWARE: because the outgoing DHCP message will contain the "normal" IP +## address of the outgoing-interface in its IP-header, some additional +## work in the system must be done. You can e.g. add an iptables rule to +## the 'nat' table similarly to this: +## +## | Chain POSTROUTING (policy ACCEPT) +## | target prot opt source destination +## | SNAT udp -- 192.168.0.6 192.168.8.66 udp spt:68 dpt:67 to:192.168.2.255 + +# ip eth0 192.168.2.255 + + +######### SERVER SETTINGS ######### +#### +### +## Definitions of the servers. There must be told the type ('ip' or +## 'bcast') and the address. When using 'ip', the address is a non-bcast +## IPv4 address (dotted, DNS-names are NOT supported); and when using +## 'bcast' servers, the address is an IFNAME. + +# TYPE address +server ip 192.168.8.66 +#server bcast eth1 diff --git a/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/root/etc/init.d/dhcp-fwd b/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/root/etc/init.d/dhcp-fwd new file mode 100644 index 000000000..597e1fc78 --- /dev/null +++ b/obsolete-buildroot/sources/openwrt/ipkg/dhcp-fwd/root/etc/init.d/dhcp-fwd @@ -0,0 +1,17 @@ +#!/bin/sh + +case $1 in + start) + [ -d /var/log ] || mkdir -p /var/log + [ -d /var/run/dhcp-wfd ] || mkdir -p /var/run/dhcp-fwd + dhcp-fwd + ;; + stop) + [ -f /var/run/dhcpd-fwd.pid ] && kill $(cat /var/run/dhcpd-fwd.pid) 2>/dev/null + ;; + *) + echo "usage: $0 (start|stop)" + exit 1 +esac + +exit $? |