diff options
Diffstat (limited to 'obsolete-buildroot/make/openwrt.mk')
| -rw-r--r-- | obsolete-buildroot/make/openwrt.mk | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/obsolete-buildroot/make/openwrt.mk b/obsolete-buildroot/make/openwrt.mk new file mode 100644 index 000000000..f3b479b90 --- /dev/null +++ b/obsolete-buildroot/make/openwrt.mk @@ -0,0 +1,270 @@ +# Makefile for to build the base openwrt +# +# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +###################################################################### +# +# WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! +# +# Currently the dependencies are not all handled. But that's true of +# our buildroot in general, since it wasn't really set up for end users. + +OPENWRT_TARGETS:= openwrt-linux openwrt-kmodules.tar.bz2 \ + openwrt-shared openwrt-mtd openwrt-nvram openwrt-wlconf \ + bridge dnsmasq1 iptables wtools busybox \ + openwrt-rootprep + +.PHONY: $(OPENWRT_TARGETS) openwrt-code.bin + +openwrt-base: $(OPENWRT_TARGETS) + +###################################################################### + +ifneq ($(filter $(TARGETS),openwrt-base),) + +# WRT54G_SOURCE=wrt54gv2.2.02.2.tgz +# WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gv2/2.02.2 + +# WRT54G_SOURCE=wrt54g.2.02.7.tgz +# WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gv2/2.02.7 +# WRT54G_DIR=$(BUILD_DIR)/WRT54G + +WRT54G_SOURCE=wrt54gs.2.07.1.tgz +WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gs/2.07.1 + +WRT54G_DIR=$(BUILD_DIR)/WRT54GS + +# OPENWRT_ROOT=openwrt-root.tar.bz2 +# OPENWRT_SITE=http://127.0.0.1 +# OPENWRT_DIR=$(BUILD_DIR)/openwrt + +LINUX_DIR=$(WRT54G_DIR)/release/src/linux/linux +LINUX_FORMAT=zImage +LINUX_BINLOC=arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz + +TARGET_MODULES_DIR:=$(TARGET_DIR)/lib/modules/2.4.20 + +$(LINUX_DIR)/.unpacked: $(WRT54G_DIR)/.prepared + -(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux) + # preserve the binary-only driver + #mv $(LINUX_DIR)/drivers/net/mac/mac.o \ + # $(LINUX_DIR)/drivers/net/mac/mac.o-saved + touch $(LINUX_DIR)/.unpacked + +$(LINUX_DIR)/.patched: $(WRT54G_DIR)/.prepared + $(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) openwrt-linux-netfilter.patch + $(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) openwrt-wrt54g-linux.patch + # use replacement diag module code + cp -f $(SOURCE_DIR)/openwrt-diag.c $(LINUX_DIR)/drivers/net/diag/diag_led.c + cp -f $(SOURCE_DIR)/openwrt-wrt54g-linux.config $(LINUX_DIR)/.config + -(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux) + touch $(LINUX_DIR)/.patched + +$(LINUX_DIR)/.configured: $(LINUX_DIR)/.patched netfilter + $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile + $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/arch/mips/Makefile + $(SED) "s,\-mcpu=,\-mtune=,g;" $(LINUX_DIR)/arch/mips/Makefile + make -C $(LINUX_DIR) oldconfig include/linux/version.h + touch $(LINUX_DIR)/.configured + +$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured $(GCC_BUILD_DIR2)/.installed + $(MAKE) -C $(LINUX_DIR) dep + touch $(LINUX_DIR)/.depend_done + +$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done + $(MAKE) -C $(LINUX_DIR) $(LINUX_FORMAT) + +openwrt-kmodules.tar.bz2: $(LINUX_DIR)/$(LINUX_BINLOC) + $(MAKE) -C $(LINUX_DIR) modules + $(MAKE) -C $(LINUX_DIR) DEPMOD=/bin/true \ + INSTALL_MOD_PATH=$(LINUX_DIR)/modules modules_install + tar -C $(LINUX_DIR)/modules/lib -cjf openwrt-kmodules.tar.bz2 modules + +openwrt-linux: $(LINUX_DIR)/$(LINUX_BINLOC) + +$(DL_DIR)/$(WRT54G_SOURCE): + $(WGET) -P $(DL_DIR) $(WRT54G_SITE)/$(WRT54G_SOURCE) + +$(WRT54G_DIR)/.source: $(DL_DIR)/$(WRT54G_SOURCE) + #zcat $(DL_DIR)/$(WRT54G_SOURCE) | tar -C $(BUILD_DIR) -xvf - WRT54G/README.TXT WRT54G/release + zcat $(DL_DIR)/$(WRT54G_SOURCE) | tar -C $(BUILD_DIR) -xvf - WRT54GS/README.TXT WRT54GS/release + touch $(WRT54G_DIR)/.source + +$(WRT54G_DIR)/.prepared: $(WRT54G_DIR)/.source + $(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR) openwrt-wrt54g-router.patch + $(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR) openwrt-wrt54g-shared.patch + touch $(WRT54G_DIR)/.prepared + +###################################################################### + +OPENWRT_ROOT_SKEL:=root.tar.gz +OPENWRT_SITE=http://openwrt.ksilebo.net/cgi-bin/viewcvs.cgi/root + +$(DL_DIR)/$(OPENWRT_ROOT_SKEL): + $(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_ROOT_SKEL) + +###################################################################### + +OPENWRT_SRCBASE:=$(WRT54G_DIR)/release/src +OPENWRT_SHARED_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/shared +OPENWRT_SHARED_TARGET_BINARY:=usr/lib/libshared.so + +$(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY): $(WRT54G_DIR)/.source + $(MAKE) -C $(OPENWRT_SHARED_BUILD_DIR) -f Makefile-openwrt \ + SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \ + CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ + CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/include -Wall -I$(OPENWRT_SRCBASE)/" \ + install + +openwrt-shared: $(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY) + +openwrt-shared-clean: + -$(MAKE) -C $(OPENWRT_SHARED_BUILD_DIR) clean + +###################################################################### + +OPENWRT_NVRAM_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/nvram +OPENWRT_NVRAM_TARGET_BINARY:=usr/sbin/nvram + +$(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY): $(WRT54G_DIR)/.source + $(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) \ + SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \ + CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ + CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/include -Wall -DOPENWRT_NVRAM" \ + install + + +openwrt-nvram: $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY) + +openwrt-nvram-clean: + -$(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) clean + +###################################################################### + +OPENWRT_MTD_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/rc +OPENWRT_MTD_TARGET_BINARY:=sbin/mtd + +$(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY): $(WRT54G_DIR)/.source $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY) # need libnvram + $(MAKE) -C $(OPENWRT_MTD_BUILD_DIR) -f Makefile-openwrt \ + TOP=$(OPENWRT_SRCBASE)/router \ + SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \ + CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ + CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/router/shared -I$(OPENWRT_SRCBASE)/include -Wall -I$(OPENWRT_SRCBASE)/" \ + install + +openwrt-mtd: $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY) + +openwrt-mtd-clean: + -$(MAKE) -C $(OPENWRT_MTD_BUILD_DIR) clean + +###################################################################### + +OPENWRT_WLCONF_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/wlconf +OPENWRT_WLCONF_TARGET_BINARY:=usr/sbin/wlconf + +$(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY): $(WRT54G_DIR)/.source + $(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) \ + TOP=$(OPENWRT_SRCBASE)/router \ + SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \ + CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \ + CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/router/shared -I$(OPENWRT_SRCBASE)/include -Wall" \ + install + + +openwrt-wlconf: $(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY) + +openwrt-wlconf-clean: + -$(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) clean + +###################################################################### + +openwrt-rootprep: + # tmp + mkdir -p $(TARGET_DIR)/tmp + chmod a+rwxt $(TARGET_DIR)/tmp + ln -sf /tmp $(TARGET_DIR)/var + rm -f $(TARGET_DIR)/usr/tmp + ln -sf ../tmp $(TARGET_DIR)/usr/tmp + # dev + mkdir -p $(TARGET_DIR)/dev + # etc + mkdir -p $(TARGET_DIR)/etc + ln -sf /tmp/resolv.conf $(TARGET_DIR)/etc/resolv.conf + # miscellaneous + mkdir -p $(TARGET_DIR)/mnt + mkdir -p $(TARGET_DIR)/proc + mkdir -p $(TARGET_DIR)/jffs + mkdir -p $(TARGET_DIR)/rom + # modules + mkdir -p $(TARGET_MODULES_DIR) + cp $(LINUX_DIR)/drivers/net/wl/wl.o $(TARGET_MODULES_DIR) + #cp $(LINUX_DIR)/drivers/net/et.4702/et.4702.o $(TARGET_MODULES_DIR) + cp $(LINUX_DIR)/drivers/net/et/et.o $(TARGET_MODULES_DIR) + cp $(LINUX_DIR)/drivers/net/diag/diag.o $(TARGET_MODULES_DIR) + +###################################################################### + +openwrt-prune: + -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIP) 2>/dev/null || true; + # remove unneeded uClibc libs + rm -rf $(TARGET_DIR)/lib/libthread_db* + rm -rf $(TARGET_DIR)/lib/libpthread* + # remove unneeded uClibc utils + rm -f $(TARGET_DIR)/sbin/ldconfig + rm -f $(TARGET_DIR)/usr/bin/ldd + # remove other unneeded files + rm -f $(TARGET_DIR)/usr/sbin/iptables-save + rm -f $(TARGET_DIR)/usr/sbin/iptables-restore + rm -f $(TARGET_DIR)/usr/sbin/ip6tables + +###################################################################### + +openwrt-linux.trx: openwrt-prune squashfsroot + $(WRT54G_DIR)/release/tools/trx -o openwrt-linux.trx \ + $(LINUX_DIR)/$(LINUX_BINLOC) $(IMAGE) + +openwrt-gs-code.bin: openwrt-linux.trx + $(WRT54G_DIR)/release/tools/addpattern -i openwrt-linux.trx \ + -o openwrt-gs-code.bin -g + +openwrt-g-code.bin: openwrt-gs-code.bin + sed -e "1s,^W54S,W54G," < openwrt-gs-code.bin > openwrt-g-code.bin + +openwrt-code.bin: openwrt-gs-code.bin openwrt-g-code.bin + +###################################################################### + +openwrt-sourceball: + tar cjf buildroot-openwrt.tar.bz2 \ + README.openwrt \ + Makefile \ + Makefile-openwrt \ + make/openwrt.mk \ + make/uclibc.mk \ + make/busybox.mk \ + sources/uClibc.config \ + sources/uClibc.config-openwrt \ + sources/busybox-openwrt-*.patch \ + sources/busybox.config \ + sources/busybox.config-openwrt \ + sources/dnsmasq1-openwrt.patch \ + sources/iptables-openwrt-extensions.patch \ + sources/openwrt-wrt54g-linux.config \ + sources/openwrt-wrt54g-*.patch \ + sources/openwrt-diag.c + +endif |