diff options
Diffstat (limited to 'obsolete-buildroot/make/gcc-uclibc-3.3.mk')
| -rw-r--r-- | obsolete-buildroot/make/gcc-uclibc-3.3.mk | 267 |
1 files changed, 0 insertions, 267 deletions
diff --git a/obsolete-buildroot/make/gcc-uclibc-3.3.mk b/obsolete-buildroot/make/gcc-uclibc-3.3.mk deleted file mode 100644 index b3795e66a..000000000 --- a/obsolete-buildroot/make/gcc-uclibc-3.3.mk +++ /dev/null @@ -1,267 +0,0 @@ -# Makefile for to build a gcc/uClibc toolchain -# -# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org> -# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org> -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - -ifneq ($(GCC_2_95_TOOLCHAIN),true) - -# Shiny new stuff... -GCC_VERSION:=3.3.3 -GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/releases/gcc-$(GCC_VERSION) -#GCC_SITE:=http://www.binarycode.org/gcc/releases/gcc-$(GCC_VERSION) -#GCC_SITE:=http://gcc.get-software.com/releases/gcc-$(GCC_VERSION) - -# -# snapshots.... -#GCC_VERSION:=3.3-20031013 -#GCC_SITE:=http://gcc.get-software.com/snapshots/$(GCC_VERSION) -# -GCC_SOURCE:=gcc-$(GCC_VERSION).tar.bz2 -GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION) -GCC_CAT:=bzcat -GCC_STRIP_HOST_BINARIES:=true - -############################################################# -# -# Setup some initial stuff -# -############################################################# - -ifeq ($(INSTALL_LIBGCJ),true) -TARGET_LANGUAGES:=c,c++,java -else -ifeq ($(INSTALL_LIBSTDCPP),true) -TARGET_LANGUAGES:=c,c++ -else -TARGET_LANGUAGES:=c -endif -endif - -############################################################# -# -# build the first pass gcc compiler -# -############################################################# -GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-3.3-initial - -$(DL_DIR)/$(GCC_SOURCE): - $(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE) - -$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE) - $(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf - - touch $(GCC_DIR)/.unpacked - -$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked - # Apply any files named gcc-*.patch from the source directory to gcc - $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc3.3-mega.patch.bz2 - $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-uclibc-3.3*.patch -ifeq ($(SOFT_FLOAT),true) -ifeq ("$(strip $(ARCH))","i386") - $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) i386-gcc-soft-float.patch -endif -endif - touch $(GCC_DIR)/.patched - -# The --without-headers option stopped working with gcc 3.0 and has never been -# # fixed, so we need to actually have working C library header files prior to -# # the step or libgcc will not build... -$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched - mkdir -p $(GCC_BUILD_DIR1) - -mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include - (cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) \ - $(GCC_DIR)/configure \ - --prefix=$(STAGING_DIR) \ - --build=$(GNU_HOST_NAME) \ - --host=$(GNU_HOST_NAME) \ - --target=$(REAL_GNU_TARGET_NAME) \ - --enable-languages=c \ - --disable-shared \ - --includedir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include \ - --with-sysroot=$(TOOL_BUILD_DIR)/uClibc_dev/ \ - --disable-__cxa_atexit \ - --enable-target-optspace \ - --with-gnu-ld \ - $(DISABLE_NLS) \ - $(MULTILIB) \ - $(SOFT_FLOAT_CONFIG_OPTION) \ - $(EXTRA_GCC_CONFIG_OPTIONS)); - touch $(GCC_BUILD_DIR1)/.configured - -$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured - PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) all-gcc - touch $(GCC_BUILD_DIR1)/.compiled - -$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled - PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) install-gcc - #rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov - #rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc $(STAGING_DIR)/share/locale - -gcc3_3_initial: uclibc-configured binutils $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc - -gcc3_3_initial-clean: - rm -rf $(GCC_BUILD_DIR1) - rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)* - -gcc3_3_initial-dirclean: - rm -rf $(GCC_BUILD_DIR1) - -############################################################# -# -# second pass compiler build. Build the compiler targeting -# the newly built shared uClibc library. -# -############################################################# -GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-3.3-final -$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a - mkdir -p $(GCC_BUILD_DIR2) - # Important! Required for limits.h to be fixed. - ln -sf include $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/sys-include - (cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) \ - $(GCC_DIR)/configure \ - --prefix=$(STAGING_DIR) \ - --build=$(GNU_HOST_NAME) \ - --host=$(GNU_HOST_NAME) \ - --target=$(REAL_GNU_TARGET_NAME) \ - --enable-languages=$(TARGET_LANGUAGES) \ - --enable-shared \ - --with-gxx-include-dir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/c++ \ - --disable-__cxa_atexit \ - --enable-target-optspace \ - --with-gnu-ld \ - $(DISABLE_NLS) \ - $(MULTILIB) \ - $(SOFT_FLOAT_CONFIG_OPTION) \ - $(GCC_USE_SJLJ_EXCEPTIONS) \ - $(EXTRA_GCC_CONFIG_OPTIONS)); - touch $(GCC_BUILD_DIR2)/.configured - -$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured - PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) all - touch $(GCC_BUILD_DIR2)/.compiled - -$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled - PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) install - # Strip the host binaries -ifeq ($(GCC_STRIP_HOST_BINARIES),true) - -strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/* -endif - # Set up the symlinks to enable lying about target name. - set -e; \ - (cd $(STAGING_DIR); \ - ln -sf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \ - cd bin; \ - for app in $(REAL_GNU_TARGET_NAME)-* ; do \ - ln -sf $${app} \ - $(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \ - done; \ - ); -ifeq ($(SOFT_FLOAT),true) - # Replace specs file with one that defaults to soft float mode. - if [ ! -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \ - echo staging dir specs file is missing ; \ - /bin/false ; \ - fi; - cp $(SOURCE_DIR)/specs-$(ARCH)-soft-float $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs -endif - touch $(GCC_BUILD_DIR2)/.installed - -gcc3_3: uclibc-configured binutils gcc3_3_initial $(LIBFLOAT_TARGET) uclibc \ - $(GCC_BUILD_DIR2)/.installed $(GCC_TARGETS) - -gcc3_3-source: $(DL_DIR)/$(GCC_SOURCE) - -gcc3_3-clean: - rm -rf $(GCC_BUILD_DIR2) - rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)* - -gcc3_3-dirclean: - rm -rf $(GCC_BUILD_DIR2) - -############################################################# -# -# Next build target gcc compiler -# -############################################################# -GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc-3.3-target - -$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR2)/.installed - mkdir -p $(GCC_BUILD_DIR3) - (cd $(GCC_BUILD_DIR3); PATH=$(TARGET_PATH) \ - $(GCC_DIR)/configure \ - --prefix=/usr \ - --build=$(GNU_HOST_NAME) \ - --host=$(REAL_GNU_TARGET_NAME) \ - --target=$(REAL_GNU_TARGET_NAME) \ - --enable-languages=$(TARGET_LANGUAGES) \ - --enable-shared \ - --with-gxx-include-dir=/usr/include/c++ \ - --disable-__cxa_atexit \ - --enable-target-optspace \ - --with-gnu-ld \ - $(DISABLE_NLS) \ - $(MULTILIB) \ - $(SOFT_FLOAT_CONFIG_OPTION) \ - $(GCC_USE_SJLJ_EXCEPTIONS) \ - $(EXTRA_GCC_CONFIG_OPTIONS)); - touch $(GCC_BUILD_DIR3)/.configured - -$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured - PATH=$(TARGET_PATH) \ - $(MAKE) $(JLEVEL) $(TARGET_GCC_ARGS) -C $(GCC_BUILD_DIR3) all - touch $(GCC_BUILD_DIR3)/.compiled - -$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled - PATH=$(TARGET_PATH) \ - $(MAKE) $(JLEVEL) DESTDIR=$(TARGET_DIR) -C $(GCC_BUILD_DIR3) install -ifeq ($(SOFT_FLOAT),true) - # Replace specs file with one that defaults to soft float mode. - if [ ! -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \ - echo target dir specs file is missing ; \ - /bin/false ; \ - fi; - cp $(SOURCE_DIR)/specs-$(ARCH)-soft-float $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs - # Make sure gcc does not think we are cross compiling - $(SED) "s/^1/0/;" $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs -else - # Remove broken specs file (cross compile flag is set). - rm -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs -endif - -(cd $(TARGET_DIR)/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1) - -(cd $(TARGET_DIR)/usr/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1) - -(cd $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION); $(STRIP) cc1 cc1plus collect2 > /dev/null 2>&1) - -(cd $(TARGET_DIR)/usr/lib; $(STRIP) libstdc++.so.*.*.* > /dev/null 2>&1) - -(cd $(TARGET_DIR)/lib; $(STRIP) libgcc_s.so.*.*.* > /dev/null 2>&1) - # - rm -f $(TARGET_DIR)/usr/lib/*.la* - #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \ - # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc - # Work around problem of missing syslimits.h - cp -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/syslimits.h $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/ - # These are in /lib, so... - #rm -rf $(TARGET_DIR)/usr/lib/libgcc_s.so* - #touch -c $(TARGET_DIR)/usr/bin/gcc - -gcc3_3_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc - -gcc3_3_target-clean: - rm -rf $(GCC_BUILD_DIR3) - rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)* - -gcc3_3_target-dirclean: - rm -rf $(GCC_BUILD_DIR3) - -endif |