summaryrefslogtreecommitdiffstats
path: root/docs/network-scripts.txt
diff options
context:
space:
mode:
Diffstat (limited to 'docs/network-scripts.txt')
-rw-r--r--docs/network-scripts.txt52
1 files changed, 0 insertions, 52 deletions
diff --git a/docs/network-scripts.txt b/docs/network-scripts.txt
deleted file mode 100644
index 024161bde..000000000
--- a/docs/network-scripts.txt
+++ /dev/null
@@ -1,52 +0,0 @@
- Structure of the network scripts in buildroot-ng
-
-
-1) Usage
-
-To be able to access the network functions, you need to include
-the necessary shell scripts by running:
-
-. /etc/functions.sh # common functions
-include /lib/network # include /lib/network/*.sh
-scan_interfaces # read and parse the network config
-
-Some protocols, such as PPP might change the configured interface names
-at run time (e.g. eth0 => ppp0 for PPPoE). That's why you have to run
-scan_interfaces instead of reading the values from the config directly.
-After running scan_interfaces, the 'ifname' option will always contain
-the effective interface name (which is used for IP traffic) and if the
-physical device name differs from it, it will be stored in the 'device'
-option.
-That means that running 'config_get lan ifname' after scan_interfaces
-might not return the same result as running it before.
-
-After running scan_interfaces, the following functions are available:
-
-- find_config <interface> looks for a network configuration that includes
- the specified network interface.
-
-- setup_interface <interface> [<config>] [<protocol>] will set up the
- specified interface, optionally overriding the network configuration
- name or the protocol that it uses.
-
-
-
-2) Writing protocol handlers
-
-You can add custom protocol handlers by adding shell scripts to
-/lib/network. They provide the following two shell functions:
-
-scan_<protocolname>() {
- local config="$1"
- # change the interface names if necessary
-}
-
-setup_interface_<protocolname>() {
- local interface="$1"
- local config="$2"
- # set up the interface
-}
-
-scan_<protocolname> is optional and only necessary if your protocol
-uses a custom device, e.g. a tunnel or a PPP device.
-