diff options
4 files changed, 0 insertions, 139 deletions
diff --git a/target/linux/adm8668/config-2.6.36 b/target/linux/adm8668/config-2.6.36 deleted file mode 100644 index 20cfcf7e2..000000000 --- a/target/linux/adm8668/config-2.6.36 +++ /dev/null @@ -1,36 +0,0 @@ -CONFIG_ADM8668=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -CONFIG_CPU_MIPSR1=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EEPROM_93CX6=m -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HW_HAS_PCI=y -CONFIG_IRQ_CPU=y -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MTD_ADM8668_NOR=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_SERIAL_ADM8668=y -CONFIG_SERIAL_ADM8668_CONSOLE=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm8668/patches-2.6.36/001-adm8668_arch.patch b/target/linux/adm8668/patches-2.6.36/001-adm8668_arch.patch deleted file mode 100644 index 81cac43d4..000000000 --- a/target/linux/adm8668/patches-2.6.36/001-adm8668_arch.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/arch/mips/Kbuild.platforms 2010-10-20 16:30:22.000000000 -0400 -+++ b/arch/mips/Kbuild.platforms 2010-10-22 08:42:06.228968083 -0400 -@@ -27,6 +27,7 @@ - platforms += txx9 - platforms += vr41xx - platforms += wrppmc -+platforms += adm8668 - - # include the platform specific files - include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms)) ---- a/arch/mips/Kconfig 2010-10-20 16:30:22.000000000 -0400 -+++ b/arch/mips/Kconfig 2010-10-22 08:37:31.016965108 -0400 -@@ -82,6 +82,24 @@ - help - Support for BCM47XX based boards - -+config ADM8668 -+ bool "WildPass ADM8668" -+ select SYS_HAS_CPU_MIPS32_R1 -+ select IRQ_CPU -+ select CEVT_R4K -+ select CSRC_R4K -+ select HW_HAS_PCI -+ select PCI -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select DMA_NONCOHERENT -+ select SWAP_IO_SPACE -+ select SERIAL_ADM8668 -+ select SERIAL_ADM8668_CONSOLE -+ help -+ ADM8668 board support by neutronscott -+ Scott Nicholas <neutronscott@scottn.us> -+ - config BCM63XX - bool "Broadcom BCM63XX based boards" - select CEVT_R4K diff --git a/target/linux/adm8668/patches-2.6.36/002-adm8668_uart.patch b/target/linux/adm8668/patches-2.6.36/002-adm8668_uart.patch deleted file mode 100644 index 44fcd29de..000000000 --- a/target/linux/adm8668/patches-2.6.36/002-adm8668_uart.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/drivers/serial/Kconfig -+++ b/drivers/serial/Kconfig -@@ -1510,6 +1510,25 @@ - If you have enabled the serial port on the bcm63xx CPU - you can make it the console by answering Y to this option. - -+config SERIAL_ADM8668 -+ tristate "ADM8668 serial port support" -+ select SERIAL_CORE -+ depends on ADM8668 -+ help -+ If you have an adm8668 CPU, you can enable its onboard -+ serial port by enabling this options. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called adm8668_uart. -+ -+config SERIAL_ADM8668_CONSOLE -+ bool "Console on adm8668 serial port" -+ depends on SERIAL_ADM8668=y -+ select SERIAL_CORE_CONSOLE -+ help -+ If you have enabled the serial port on the adm8668 CPU -+ you can make it the console by answering Y to this option. -+ - config SERIAL_GRLIB_GAISLER_APBUART - tristate "GRLIB APBUART serial support" - depends on OF ---- a/include/linux/serial_core.h -+++ b/include/linux/serial_core.h -@@ -196,6 +196,9 @@ - /* High Speed UART for Medfield */ - #define PORT_MFD 95 - -+/* ADM8668 UART */ -+#define PORT_ADM8668 93 -+ - #ifdef __KERNEL__ - - #include <linux/compiler.h> - diff --git a/target/linux/adm8668/patches-2.6.36/003-adm8668_nor_map.patch b/target/linux/adm8668/patches-2.6.36/003-adm8668_nor_map.patch deleted file mode 100644 index 59fba583e..000000000 --- a/target/linux/adm8668/patches-2.6.36/003-adm8668_nor_map.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -103,6 +103,12 @@ - default "0x02000000" - depends on MSP_FLASH_MAP_LIMIT_32M - -+config MTD_ADM8668_NOR -+ tristate "ADM8668 NOR mapping" -+ depends on ADM8668 && MTD_CFI -+ help -+ mapping driver for ADM8668 NOR -+ - config MTD_SUN_UFLASH - tristate "Sun Microsystems userflash support" - depends on SPARC && MTD_CFI && PCI ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -7,6 +7,7 @@ - endif - - # Chip mappings -+obj-$(CONFIG_MTD_ADM8668_NOR) += adm8668.o - obj-$(CONFIG_MTD_CDB89712) += cdb89712.o - obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o - obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o |