summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/brcm63xx/config-2.6.274
-rw-r--r--target/linux/brcm63xx/patches-2.6.27/014-inventel_livebox.patch195
2 files changed, 197 insertions, 2 deletions
diff --git a/target/linux/brcm63xx/config-2.6.27 b/target/linux/brcm63xx/config-2.6.27
index 9e0689210..72e4c4dd7 100644
--- a/target/linux/brcm63xx/config-2.6.27
+++ b/target/linux/brcm63xx/config-2.6.27
@@ -23,6 +23,7 @@ CONFIG_BITREVERSE=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BOARD_BCM963XX=y
+# CONFIG_BOARD_LIVEBOX is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BSD_DISKLABEL is not set
CONFIG_BSD_PROCESS_ACCT_V3=y
@@ -84,12 +85,11 @@ CONFIG_EQUALIZER=m
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXTRA_FIRMWARE=""
-CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_FIXED_PHY is not set
CONFIG_FS_MBCACHE=m
CONFIG_FS_POSIX_ACL=y
CONFIG_FUSE_FS=m
-CONFIG_FW_LOADER=m
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
diff --git a/target/linux/brcm63xx/patches-2.6.27/014-inventel_livebox.patch b/target/linux/brcm63xx/patches-2.6.27/014-inventel_livebox.patch
new file mode 100644
index 000000000..f0eadf839
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.27/014-inventel_livebox.patch
@@ -0,0 +1,195 @@
+diff -urN linux-2.6.27.4/arch/mips/bcm63xx/boards/Kconfig linux-2.6.27.4.new/arch/mips/bcm63xx/boards/Kconfig
+--- linux-2.6.27.4/arch/mips/bcm63xx/boards/Kconfig 2008-11-03 20:00:41.000000000 +0100
++++ linux-2.6.27.4.new/arch/mips/bcm63xx/boards/Kconfig 2008-11-03 20:02:45.000000000 +0100
+@@ -7,4 +7,9 @@
+ bool "Generic Broadcom 963xx boards"
+ help
+
++config BOARD_LIVEBOX
++ bool "Inventel Livebox(es) boards"
++ help
++ Boards using RedBoot.
++
+ endchoice
+diff -urN linux-2.6.27.4/arch/mips/bcm63xx/boards/Makefile linux-2.6.27.4.new/arch/mips/bcm63xx/boards/Makefile
+--- linux-2.6.27.4/arch/mips/bcm63xx/boards/Makefile 2008-11-03 20:00:41.000000000 +0100
++++ linux-2.6.27.4.new/arch/mips/bcm63xx/boards/Makefile 2008-11-03 20:01:34.000000000 +0100
+@@ -1 +1,2 @@
+ obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o
++obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o
+diff -urN linux-2.6.27.4/arch/mips/bcm63xx/boards/board_livebox.c linux-2.6.27.4.new/arch/mips/bcm63xx/boards/board_livebox.c
+--- linux-2.6.27.4/arch/mips/bcm63xx/boards/board_livebox.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.27.4.new/arch/mips/bcm63xx/boards/board_livebox.c 2008-11-03 20:03:59.000000000 +0100
+@@ -0,0 +1,172 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_uart.h>
++#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_ehci.h>
++#include <board_bcm963xx.h>
++
++#define PFX "board_livebox: "
++
++static unsigned int mac_addr_used = 0;
++static struct board_info board;
++
++/*
++ * known 6348 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6348
++static struct board_info __initdata board_livebox = {
++ .name = "Livebox",
++ .expected_cpu_id = 0x6348,
++
++ .has_enet0 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++};
++#endif
++
++/*
++ * all boards
++ */
++static const struct board_info __initdata *bcm963xx_boards[] = {
++#ifdef CONFIG_BCM63XX_CPU_6348
++ &board_livebox
++#endif
++};
++
++/*
++ * early init callback
++ */
++void __init board_prom_init(void)
++{
++ u32 val;
++
++ /* read base address of boot chip select (0) */
++ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++ val &= MPI_CSBASE_BASE_MASK;
++
++ /* assume board is a Livebox */
++ memcpy(&board, bcm963xx_boards[0], sizeof(board));
++
++ /* setup pin multiplexing depending on board enabled device,
++ * this has to be done this early since PCI init is done
++ * inside arch_initcall */
++ val = 0;
++
++ if (board.has_pci) {
++ bcm63xx_pci_enabled = 1;
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G2_PCI;
++ }
++
++ if (board.has_pccard) {
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G1_MII_PCCARD;
++ }
++
++ if (board.has_enet0 && !board.enet0.use_internal_phy) {
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G3_EXT_MII |
++ GPIO_MODE_6348_G0_EXT_MII;
++ }
++
++ if (board.has_enet1 && !board.enet1.use_internal_phy) {
++ if (BCMCPU_IS_6348())
++ val |= GPIO_MODE_6348_G3_EXT_MII |
++ GPIO_MODE_6348_G0_EXT_MII;
++ }
++
++ bcm_gpio_writel(val, GPIO_MODE_REG);
++}
++
++/*
++ * second stage init callback, good time to panic if we couldn't
++ * identify on which board we're running since early printk is working
++ */
++void __init board_setup(void)
++{
++ if (!board.name[0])
++ panic("unable to detect bcm963xx board");
++ printk(KERN_INFO PFX "board name: %s\n", board.name);
++
++ /* make sure we're running on expected cpu */
++ if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
++ panic("unexpected CPU for bcm963xx board");
++}
++
++/*
++ * return board name for /proc/cpuinfo
++ */
++const char *board_get_name(void)
++{
++ return board.name;
++}
++
++/*
++ * register & return a new board mac address
++ */
++static int board_get_mac_address(u8 *mac)
++{
++ /* Not yet implemented */
++ return 0;
++}
++
++/*
++ * third stage init callback, register all board devices.
++ */
++int __init board_register_devices(void)
++{
++ u32 val;
++
++ bcm63xx_uart_register();
++
++ if (board.has_pccard)
++ bcm63xx_pcmcia_register();
++
++ if (board.has_enet0 &&
++ !board_get_mac_address(board.enet0.mac_addr))
++ bcm63xx_enet_register(0, &board.enet0);
++
++ if (board.has_enet1 &&
++ !board_get_mac_address(board.enet1.mac_addr))
++ bcm63xx_enet_register(1, &board.enet1);
++
++ if (board.has_ohci0)
++ bcm63xx_ohci_register();
++
++ if (board.has_ehci0)
++ bcm63xx_ehci_register();
++
++
++ /* read base address of boot chip select (0) */
++ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++ val &= MPI_CSBASE_BASE_MASK;
++
++ return 0;
++}
++