diff options
10 files changed, 18 insertions, 53 deletions
diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g300nh/network b/target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g300nh/network index 79f4799f9..20dd9444d 100644 --- a/target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g300nh/network +++ b/target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g300nh/network @@ -16,11 +16,11 @@ config interface wan option proto dhcp config switch - option name rtl8366s + option name switch0 option reset 1 option enable_vlan 1 config switch_vlan - option device rtl8366s + option device switch0 option vlan 1 option ports "0 1 2 3 5t" diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g301nh/network b/target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g301nh/network deleted file mode 100644 index 72a4c881d..000000000 --- a/target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g301nh/network +++ /dev/null @@ -1,26 +0,0 @@ -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth0.1 - option type bridge - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 - -config interface wan - option ifname eth1 - option proto dhcp - -config switch - option name rtl8366rb - option reset 1 - option enable_vlan 1 - -config switch_vlan - option device rtl8366rb - option vlan 1 - option ports "0 1 2 3 5t" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 6cd6043f8..d61a78d83 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -123,7 +123,7 @@ get_status_led() { wrt160nl) status_led="wrt160nl:blue:wps" ;; - wzr-hp-g300nh | wzr-hp-g301nh) + wzr-hp-g300nh) status_led="wzr-hp-g300nh:green:router" ;; zcn-1523h-2 | zcn-1523h-5) diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh b/target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh index db8d9f489..1308a7bb0 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh @@ -32,6 +32,6 @@ commit system EOF } -if [ "${board}" == "wzr-hp-g300nh" -o "${board}" == "wzr-hp-g301nh" ]; then +if [ "${board}" == "wzr-hp-g300nh" ]; then wzrhpg300nh_set_leds -fi
\ No newline at end of file +fi diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index e23ac28de..92b0e66c6 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -160,9 +160,6 @@ ar71xx_board_name() { *WZR-HP-G300NH) name="wzr-hp-g300nh" ;; - *WZR-HP-G301NH) - name="wzr-hp-g301nh" - ;; *ZCN-1523H-2) name="zcn-1523h-2" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 3de0c863b..ab0adb2e8 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -76,7 +76,7 @@ platform_check_image() { } return 0 ;; - ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt400n | bullet-m | nanostation-m | rocket-m | wzr-hp-g300nh | wzr-hp-g301nh | wzr-hp-ag300h | nbg460n_550n_550nh | unifi ) + ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt400n | bullet-m | nanostation-m | rocket-m | wzr-hp-g300nh | wzr-hp-ag300h | nbg460n_550n_550nh | unifi ) [ "$magic" != "2705" ] && { echo "Invalid image type." return 1 diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c index 308f93141..9a1fbea39 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c @@ -226,7 +226,7 @@ static struct platform_device wzrhpg300nh_rtl8366s_device = { } }; -static struct platform_device wzrhpg301nh_rtl8366rb_device = { +static struct platform_device wzrhpg300nh_rtl8366rb_device = { .name = RTL8366RB_DRIVER_NAME, .id = -1, .dev = { @@ -234,7 +234,7 @@ static struct platform_device wzrhpg301nh_rtl8366rb_device = { } }; -static void __init wzrhpg30xnh_setup(void) +static void __init wzrhpg300nh_setup(void) { u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET; @@ -248,9 +248,9 @@ static void __init wzrhpg30xnh_setup(void) if (hasrtl8366rb) { ar71xx_eth0_pll_data.pll_1000 = 0x1f000000; - ar71xx_eth0_data.mii_bus_dev = &wzrhpg301nh_rtl8366rb_device.dev; + ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; ar71xx_eth1_pll_data.pll_1000 = 0x100; - ar71xx_eth1_data.mii_bus_dev = &wzrhpg301nh_rtl8366rb_device.dev; + ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; } else { ar71xx_eth0_pll_data.pll_1000 = 0x1e000100; ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; @@ -275,7 +275,7 @@ static void __init wzrhpg30xnh_setup(void) platform_device_register(&wzrhpg300nh_flash_device); if (hasrtl8366rb) - platform_device_register(&wzrhpg301nh_rtl8366rb_device); + platform_device_register(&wzrhpg300nh_rtl8366rb_device); else platform_device_register(&wzrhpg300nh_rtl8366s_device); @@ -289,7 +289,4 @@ static void __init wzrhpg30xnh_setup(void) } MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH, "WZR-HP-G300NH", - "Buffalo WZR-HP-G300NH", wzrhpg30xnh_setup); - -MIPS_MACHINE(AR71XX_MACH_WZR_HP_G301NH, "WZR-HP-G301NH", - "Buffalo WZR-HP-G301NH", wzrhpg30xnh_setup); + "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h index 3071792f2..823f3ffb9 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h @@ -64,7 +64,6 @@ enum ar71xx_mach_type { AR71XX_MACH_WRT400N, /* Linksys WRT400N */ AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ - AR71XX_MACH_WZR_HP_G301NH, /* Buffalo WZR-HP-G301NH */ AR71XX_MACH_EAP7660D, /* Senao EAP7660D */ AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ diff --git a/target/linux/ar71xx/generic/profiles/buffalo.mk b/target/linux/ar71xx/generic/profiles/buffalo.mk index 5d9bab540..2b39f379a 100644 --- a/target/linux/ar71xx/generic/profiles/buffalo.mk +++ b/target/linux/ar71xx/generic/profiles/buffalo.mk @@ -5,16 +5,16 @@ # See /LICENSE for more information. # -define Profile/WZRHPG30XNH - NAME:=Buffalo WZR-HP-G30XNH +define Profile/WZRHPG300NH + NAME:=Buffalo WZR-HP-G300NH PACKAGES:=kmod-ath9k wpad-mini kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev endef -define Profile/WZRHPG30XNH/Description +define Profile/WZRHPG300NH/Description Package set optimized for the Buffalo WZR-HP-G300NH and WZR-HP-G301NH endef -$(eval $(call Profile,WZRHPG30XNH)) +$(eval $(call Profile,WZRHPG300NH)) define Profile/WZRHPAG300H NAME:=Buffalo WZR-HP-AG300H diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index cc45e4e85..7814e53fd 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -777,10 +777,8 @@ define Image/Build/Profile/WRT160NL endef wzrhpg300nh_cmdline=board=WZR-HP-G300NH console=ttyS0,115200 -wzrhpg301nh_cmdline=board=WZR-HP-G301NH console=ttyS0,115200 -define Image/Build/Profile/WZRHPG30XNH +define Image/Build/Profile/WZRHPG300NH $(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG30XNH,wzr-hp-g300nh,$(wzrhpg300nh_cmdline),WZR-HP-G300NH) - $(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG30XNH,wzr-hp-g301nh,$(wzrhpg301nh_cmdline),WZR-HP-G301NH) endef wzrhpag300h_cmdline=board=WZR-HP-AG300H console=ttyS0,115200 @@ -840,7 +838,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/AP96,$(1)) $(call Image/Build/Profile/WRT400N,$(1)) $(call Image/Build/Profile/WRT160NL,$(1)) - $(call Image/Build/Profile/WZRHPG30XNH,$(1)) + $(call Image/Build/Profile/WZRHPG300NH,$(1)) $(call Image/Build/Profile/WZRHPAG300H,$(1)) $(call Image/Build/Profile/ZCN1523H28,$(1)) $(call Image/Build/Profile/ZCN1523H516,$(1)) |