diff options
| -rw-r--r-- | package/switch/src/switch-robo.c | 27 | ||||
| -rwxr-xr-x | target/linux/brcm-2.4/base-files/etc/preinit.arch | 5 |
2 files changed, 28 insertions, 4 deletions
diff --git a/package/switch/src/switch-robo.c b/package/switch/src/switch-robo.c index 206359d07..481bb76a5 100644 --- a/package/switch/src/switch-robo.c +++ b/package/switch/src/switch-robo.c @@ -58,6 +58,7 @@ #define ROBO_DEVICE_ID_5395 0x95 #define ROBO_DEVICE_ID_5397 0x97 #define ROBO_DEVICE_ID_5398 0x98 +#define ROBO_DEVICE_ID_53115 0x3115 /* Private et.o ioctls */ #define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9) @@ -297,6 +298,7 @@ static void robo_switch_reset(void) (robo.devid == ROBO_DEVICE_ID_5398)) { /* Trigger a software reset. */ robo_write16(ROBO_CTRL_PAGE, 0x79, 0x83); + mdelay(500); robo_write16(ROBO_CTRL_PAGE, 0x79, 0); } } @@ -367,7 +369,8 @@ static int robo_probe(char *devname) if (err) return err; - printk("found!\n"); + printk("found a 5%s%x!%s\n", robo.devid & 0xff00 ? "" : "3", robo.devid, + robo.is_5350 ? " It's a 5350." : ""); return 0; } @@ -445,6 +448,17 @@ static int handle_vlan_port_write(void *driver, char *buf, int nr) } /* write config now */ + + if (robo.devid != ROBO_DEVICE_ID_5325) { + __u8 regoff = ((robo.devid == ROBO_DEVICE_ID_5395) || + (robo.devid == ROBO_DEVICE_ID_53115)) ? 0x20 : 0; + + robo_write32(ROBO_ARLIO_PAGE, 0x63 + regoff, (c->untag << 9) | c->port); + robo_write16(ROBO_ARLIO_PAGE, 0x61 + regoff, nr); + robo_write16(ROBO_ARLIO_PAGE, 0x60 + regoff, 1 << 7); + return 0; + } + val16 = (nr) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */; if (robo.is_5350) { robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, @@ -486,7 +500,12 @@ static int handle_enable_vlan_write(void *driver, char *buf, int nr) robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 : (1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */); robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 : - (1 << 1) | (1 << 2) | (1 << 3) /* RSV multicast */); + (robo.devid == ROBO_DEVICE_ID_5325 ? (1 << 1) : 0) | /* RSV multicast */ + robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) | (1 << 2) | (1 << 3)); + + if (robo.devid != ROBO_DEVICE_ID_5325) + return 0; + robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 : (1 << 6) /* drop invalid VID frames */); robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 : @@ -585,6 +604,10 @@ static int __init robo_init(void) .port_handlers = NULL, .vlan_handlers = vlan, }; + if (robo.devid != ROBO_DEVICE_ID_5325) { + driver.ports = 9; + driver.cpuport = 8; + } return switch_register_driver(&driver); } diff --git a/target/linux/brcm-2.4/base-files/etc/preinit.arch b/target/linux/brcm-2.4/base-files/etc/preinit.arch index 25d11d96a..a90d314e2 100755 --- a/target/linux/brcm-2.4/base-files/etc/preinit.arch +++ b/target/linux/brcm-2.4/base-files/etc/preinit.arch @@ -37,8 +37,6 @@ case "$(cat /proc/diag/model)" in "Sitecom WL-105b") ifname=eth1;; esac -failsafe_ip - check_module () { module="$1"; shift; params="$*" @@ -48,11 +46,14 @@ check_module () { return $? } +check_module tg3 insmod switch-core check_module switch-robo || check_module switch-adm || { check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*" } || rmmod switch-core +failsafe_ip + [ -d /proc/switch/eth0 ] && { echo 1 > /proc/switch/eth0/reset |