diff options
14 files changed, 1 insertions, 573 deletions
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch index 184d9fbad..574b2d215 100644 --- a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch +++ b/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch @@ -2,7 +2,7 @@ Index: linux-2.6.22.1/drivers/mtd/Kconfig =================================================================== --- linux-2.6.22.1.orig/drivers/mtd/Kconfig +++ linux-2.6.22.1/drivers/mtd/Kconfig -@@ -155,6 +155,22 @@ config MTD_AFS_PARTS +@@ -160,6 +160,22 @@ config MTD_AFS_PARTS for your particular device. It won't happen automatically. The 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch deleted file mode 100644 index c1b2688d5..000000000 --- a/target/linux/adm5120-2.6/patches/001-adm5120.patch +++ /dev/null @@ -1,111 +0,0 @@ -Index: linux-2.6.21.1/arch/mips/Kconfig -=================================================================== ---- linux-2.6.21.1.orig/arch/mips/Kconfig -+++ linux-2.6.21.1/arch/mips/Kconfig -@@ -16,6 +16,17 @@ choice - prompt "System type" - default SGI_IP22 - -+config MIPS_ADM5120 -+ bool "Support for ADM5120 SoC" -+ select SYS_HAS_CPU_MIPS32_R1 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select GENERIC_GPIO -+ - config MIPS_MTX1 - bool "4G Systems MTX-1 board" - select DMA_NONCOHERENT -@@ -766,6 +775,7 @@ - - endchoice - -+source "arch/mips/adm5120/Kconfig" - source "arch/mips/ddb5xxx/Kconfig" - source "arch/mips/gt64120/ev64120/Kconfig" - source "arch/mips/jazz/Kconfig" -Index: linux-2.6.21.1/arch/mips/Makefile -=================================================================== ---- linux-2.6.21.1.orig/arch/mips/Makefile -+++ linux-2.6.21.1/arch/mips/Makefile -@@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/ - load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 - - # -+# ADMtek 5120 -+# -+ -+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/ -+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120 -+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000 -+ -+# - # Common Alchemy Au1x00 stuff - # - core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ -Index: linux-2.6.21.1/include/asm-mips/bootinfo.h -=================================================================== ---- linux-2.6.21.1.orig/include/asm-mips/bootinfo.h -+++ linux-2.6.21.1/include/asm-mips/bootinfo.h -@@ -213,6 +213,57 @@ - #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ - #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ - -+/* -+ * Valid machtype for group ADMtek ADM5120 -+ */ -+#define MACH_GROUP_ADM5120 23 -+#define MACH_ADM5120_UNKNOWN 0 /* Unknown board */ -+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */ -+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */ -+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */ -+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */ -+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */ -+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */ -+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */ -+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */ -+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */ -+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */ -+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */ -+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */ -+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */ -+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */ -+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */ -+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */ -+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */ -+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */ -+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */ -+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */ -+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */ -+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */ -+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */ -+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */ -+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */ -+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */ -+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */ -+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */ -+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */ -+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */ -+#define MACH_ADM5120_ES2024A 31 /* ZyXEL Ethernet Switch 2024A */ -+#define MACH_ADM5120_ES2024PWR 32 /* ZyXEL Ethernet Switch 2024PWR */ -+#define MACH_ADM5120_CAS630 33 /* Cellvision CAS-630/630W */ -+#define MACH_ADM5120_CAS670 34 /* Cellvision CAS-670/670W */ -+#define MACH_ADM5120_CAS700 36 /* Cellvision CAS-700/700W */ -+#define MACH_ADM5120_CAS771 37 /* Cellvision CAS-771/771W */ -+#define MACH_ADM5120_CAS790 38 /* Cellvision CAS-790 */ -+#define MACH_ADM5120_CAS861 39 /* Cellvision CAS-861/861W */ -+#define MACH_ADM5120_NFS101U 40 /* Cellvision NFS-101U/101WU */ -+#define MACH_ADM5120_NFS202U 41 /* Cellvision NFS-202U/202WU */ -+#define MACH_ADM5120_EASY5120 43 /* Infineon EASY 5120 */ -+#define MACH_ADM5120_EASY5120RT 44 /* Infineon EASY 5120-RT */ -+#define MACH_ADM5120_EASY5120PATA 45 /* Infineon EASY 5120P-ATA */ -+#define MACH_ADM5120_EASY83000 46 /* Infineon EASY-83000 */ -+#define MACH_ADM5120_BR6104K 47 /* Edimax BR-6104K */ -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch deleted file mode 100644 index c6237c6dd..000000000 --- a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch +++ /dev/null @@ -1,27 +0,0 @@ -Index: linux-2.6.21.1/drivers/mtd/maps/Kconfig -=================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/maps/Kconfig -+++ linux-2.6.21.1/drivers/mtd/maps/Kconfig -@@ -605,5 +605,10 @@ config MTD_PLATRAM - - This selection automatically selects the map_ram driver. - -+config MTD_ADM5120 -+ tristate "Map driver for ADMtek ADM5120 boards" -+ depends on MIPS_ADM5120 -+ select MTD_CFI_AMDSTD -+ - endmenu - -Index: linux-2.6.21.1/drivers/mtd/maps/Makefile -=================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/maps/Makefile -+++ linux-2.6.21.1/drivers/mtd/maps/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o - obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o - obj-$(CONFIG_MTD_PCI) += pci.o - obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o -+obj-$(CONFIG_MTD_ADM5120) += adm5120_mtd.o - obj-$(CONFIG_MTD_LASAT) += lasat.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch deleted file mode 100644 index cbd28b1aa..000000000 --- a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch +++ /dev/null @@ -1,27 +0,0 @@ -Index: linux-2.6.21.1/drivers/net/Kconfig -=================================================================== ---- linux-2.6.21.1.orig/drivers/net/Kconfig -+++ linux-2.6.21.1/drivers/net/Kconfig -@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET - If you have an Alchemy Semi AU1X00 based system - say Y. Otherwise, say N. - -+config MIPS_ADM5120_ENET -+ tristate "MIPS ADM5120 Ethernet switch support" -+ depends on NET_ETHERNET && MIPS_ADM5120 -+ - config NET_SB1250_MAC - tristate "SB1250 Ethernet support" - depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC -Index: linux-2.6.21.1/drivers/net/Makefile -=================================================================== ---- linux-2.6.21.1.orig/drivers/net/Makefile -+++ linux-2.6.21.1/drivers/net/Makefile -@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o - # This is also a 82596 and should probably be merged - obj-$(CONFIG_LP486E) += lp486e.o - -+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o - obj-$(CONFIG_ETH16I) += eth16i.o - obj-$(CONFIG_ZORRO8390) += zorro8390.o - obj-$(CONFIG_HPLANCE) += hplance.o 7990.o diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch deleted file mode 100644 index 8a6d0205e..000000000 --- a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch +++ /dev/null @@ -1,53 +0,0 @@ -Index: linux-2.6.21.1/drivers/serial/Makefile -=================================================================== ---- linux-2.6.21.1.orig/drivers/serial/Makefile -+++ linux-2.6.21.1/drivers/serial/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) - obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o - obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o - obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o -+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o - obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o - obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o - obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o -Index: linux-2.6.21.1/include/linux/serial_core.h -=================================================================== ---- linux-2.6.21.1.orig/include/linux/serial_core.h -+++ linux-2.6.21.1/include/linux/serial_core.h -@@ -135,6 +135,9 @@ - /* Xilinx uartlite */ - #define PORT_UARTLITE 74 - -+/* ADMtek ADM5120 SoC */ -+#define PORT_ADM5120 68 -+ - #ifdef __KERNEL__ - - #include <linux/compiler.h> -Index: linux-2.6.21.1/drivers/serial/Kconfig -=================================================================== ---- linux-2.6.21.1.orig/drivers/serial/Kconfig -+++ linux-2.6.21.1/drivers/serial/Kconfig -@@ -256,6 +256,22 @@ config SERIAL_8250_AU1X00 - - comment "Non-8250 serial port support" - -+config SERIAL_ADM5120 -+ bool "ADM5120 serial port support" -+ depends on MIPS_ADM5120 -+ select SERIAL_CORE -+ select SERIAL_CORE_CONSOLE -+ help -+ Driver for the on chip UARTs on the ADM5120 SoC -+ -+config ADM5120_NR_UARTS -+ int "Maximum number of ADM5120 serial ports" -+ depends on SERIAL_ADM5120 -+ default "2" -+ ---help--- -+ Set this to the number of serial ports you want the driver to -+ support. -+ - config SERIAL_AMBA_PL010 - tristate "ARM AMBA PL010 serial port support" - depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch deleted file mode 100644 index f48b0f96c..000000000 --- a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch +++ /dev/null @@ -1,58 +0,0 @@ -Index: linux-2.6.21.1/drivers/usb/core/hub.c -=================================================================== ---- linux-2.6.21.1.orig/drivers/usb/core/hub.c -+++ linux-2.6.21.1/drivers/usb/core/hub.c -@@ -2227,6 +2227,8 @@ hub_port_init (struct usb_hub *hub, stru - USB_DT_DEVICE << 8, 0, - buf, GET_DESCRIPTOR_BUFSIZE, - (i ? USB_CTRL_GET_TIMEOUT : 1000)); -+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0, -+buf->bDescriptorType, USB_DT_DEVICE); - switch (buf->bMaxPacketSize0) { - case 8: case 16: case 32: case 64: case 255: - if (buf->bDescriptorType == -Index: linux-2.6.21.1/drivers/usb/host/Kconfig -=================================================================== ---- linux-2.6.21.1.orig/drivers/usb/host/Kconfig -+++ linux-2.6.21.1/drivers/usb/host/Kconfig -@@ -224,3 +224,6 @@ config USB_SL811_CS - To compile this driver as a module, choose M here: the - module will be called "sl811_cs". - -+config USB_ADM5120_HCD -+ tristate "ADM5120 HCD support" -+ depends on USB && MIPS_ADM5120 -Index: linux-2.6.21.1/drivers/usb/host/Makefile -=================================================================== ---- linux-2.6.21.1.orig/drivers/usb/host/Makefile -+++ linux-2.6.21.1/drivers/usb/host/Makefile -@@ -16,3 +16,4 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd - obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o - obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o - obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o -+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o -Index: linux-2.6.21.1/drivers/usb/Kconfig -=================================================================== ---- linux-2.6.21.1.orig/drivers/usb/Kconfig -+++ linux-2.6.21.1/drivers/usb/Kconfig -@@ -91,8 +91,6 @@ source "drivers/usb/image/Kconfig" - - source "drivers/usb/net/Kconfig" - --source "drivers/usb/mon/Kconfig" -- - comment "USB port drivers" - depends on USB - -Index: linux-2.6.21.1/drivers/usb/Makefile -=================================================================== ---- linux-2.6.21.1.orig/drivers/usb/Makefile -+++ linux-2.6.21.1/drivers/usb/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/ - obj-$(CONFIG_USB_U132_HCD) += host/ - obj-$(CONFIG_ETRAX_USB_HOST) += host/ - obj-$(CONFIG_USB_OHCI_AT91) += host/ -+obj-$(CONFIG_USB_ADM5120_HCD) += host/ - - obj-$(CONFIG_USB_ACM) += class/ - obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch b/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch deleted file mode 100644 index ac654a017..000000000 --- a/target/linux/adm5120-2.6/patches/006-adm5120_leds.patch +++ /dev/null @@ -1,45 +0,0 @@ -Index: linux-2.6.21.1/drivers/leds/Kconfig -=================================================================== ---- linux-2.6.21.1.orig/drivers/leds/Kconfig -+++ linux-2.6.21.1/drivers/leds/Kconfig -@@ -19,6 +19,27 @@ config LEDS_CLASS - - comment "LED drivers" - -+config LEDS_GPIO -+ tristate "LED support for LEDS on GPIO lines" -+ depends on LEDS_CLASS && GENERIC_GPIO -+ help -+ This option enables support for LEDs connected to GPIO lines -+ -+config LEDS_ADM5120 -+ tristate "LED Support for ADM5120 GPIO LEDs" -+ depends on LEDS_GPIO && MIPS_ADM5120 -+ help -+ This option enables support for LEDs connected to GPIO lines -+ on ADM5120 SoC based platforms. -+ -+config LEDS_ADM5120_EXPERIMENTAL -+ bool "Enable ADM5120 LEDs experimental code" -+ depends on LEDS_ADM5120 -+ -+config LEDS_ADM5120_DIAG -+ bool "Enable ADM5120 LEDs diagnostic mode" -+ depends on LEDS_ADM5120 -+ - config LEDS_CORGI - tristate "LED Support for the Sharp SL-C7x0 series" - depends on LEDS_CLASS && PXA_SHARP_C7xx -Index: linux-2.6.21.1/drivers/leds/Makefile -=================================================================== ---- linux-2.6.21.1.orig/drivers/leds/Makefile -+++ linux-2.6.21.1/drivers/leds/Makefile -@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o - obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o - - # LED Platform Drivers -+obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o -+obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o - obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o - obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o - obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch deleted file mode 100644 index 1098a24ba..000000000 --- a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch +++ /dev/null @@ -1,23 +0,0 @@ -Index: linux-2.6.21.1/arch/mips/pci/Makefile -=================================================================== ---- linux-2.6.21.1.orig/arch/mips/pci/Makefile -+++ linux-2.6.21.1/arch/mips/pci/Makefile -@@ -53,3 +53,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- - obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o -+obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o -Index: linux-2.6.21.1/include/linux/pci_ids.h -=================================================================== ---- linux-2.6.21.1.orig/include/linux/pci_ids.h -+++ linux-2.6.21.1/include/linux/pci_ids.h -@@ -1701,6 +1701,9 @@ - #define PCI_VENDOR_ID_ESDGMBH 0x12fe - #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 - -+#define PCI_VENDOR_ID_ADMTEK 0x1317 -+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120 -+ - #define PCI_VENDOR_ID_SIIG 0x131f - #define PCI_SUBVENDOR_ID_SIIG 0x131f - #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 diff --git a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch b/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch deleted file mode 100644 index 6b0fe55ed..000000000 --- a/target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- linux-2.6.19.2/include/asm-mips/byteorder.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/include/asm-mips/byteorder.h 2007-05-16 21:14:47.000000000 +0200 -@@ -58,6 +58,35 @@ - - #endif /* CONFIG_CPU_MIPSR2 */ - -+#ifdef CONFIG_ADM5120_HARDWARE_SWAB -+ -+static __inline__ __attribute_const__ __u16 ___adm5120__swab16(__u16 x) -+{ -+ __asm__ ( -+ " sh %2, 0xCA(%1) \n" -+ " lhu %0, 0xCC(%1) \n" -+ : "=r" (x) -+ : "r" (0xB2000000), "r" (x)); -+ -+ return x; -+} -+ -+static __inline__ __attribute_const__ __u32 ___adm5120__swab32(__u32 x) -+{ -+ __asm__ ( -+ " sw %2, 0xC8(%1) \n" -+ " lw %0, 0xCC(%1) \n" -+ : "=r" (x) -+ : "r" (0xB2000000), "r" (x)); -+ -+ return x; -+} -+ -+#define __arch__swab16(x) ___adm5120__swab16(x) -+#define __arch__swab32(x) ___adm5120__swab32(x) -+ -+#endif /* CONFIG_ADM5120_HARDWARE_SWAB */ -+ - #if !defined(__STRICT_ANSI__) || defined(__KERNEL__) - # define __BYTEORDER_HAS_U64__ - # define __SWAB_64_THRU_32__ diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch deleted file mode 100644 index 88b90454a..000000000 --- a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch +++ /dev/null @@ -1,39 +0,0 @@ -Index: linux-2.6.21.1/drivers/mtd/Kconfig -=================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/Kconfig -+++ linux-2.6.21.1/drivers/mtd/Kconfig -@@ -157,6 +157,22 @@ config MTD_AFS_PARTS - for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. - -+config MTD_MYLOADER_PARTS -+ tristate "MyLoader partition parsing" -+ depends on MIPS_ADM5120 && MTD_PARTITIONS -+ ---help--- -+ MyLoader is a bootloader which allows the user to define partitions -+ in flash devices, by putting a table in the second erase block -+ on the device, similar to a partition table. This table gives the -+ offsets and lengths of the user defined partitions. -+ -+ If you need code which can detect and parse these tables, and -+ register MTD 'partitions' corresponding to each image detected, -+ enable this option. -+ -+ You will still need the parsing functions to be called by the driver -+ for your particular device. It won't happen automatically. -+ - comment "User Modules And Translation Layers" - depends on MTD - -Index: linux-2.6.21.1/drivers/mtd/Makefile -=================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/Makefile -+++ linux-2.6.21.1/drivers/mtd/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o -+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch b/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch deleted file mode 100644 index 84fc8652f..000000000 --- a/target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch +++ /dev/null @@ -1,95 +0,0 @@ -Index: linux-2.6.21.5/drivers/mtd/chips/cfi_cmdset_0002.c -=================================================================== ---- linux-2.6.21.5.orig/drivers/mtd/chips/cfi_cmdset_0002.c -+++ linux-2.6.21.5/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -47,12 +47,19 @@ - #define MANUFACTURER_AMD 0x0001 - #define MANUFACTURER_ATMEL 0x001F - #define MANUFACTURER_SST 0x00BF -+#define MANUFACTURER_MACRONIX 0x00C2 - #define SST49LF004B 0x0060 - #define SST49LF040B 0x0050 - #define SST49LF008A 0x005a - #define AT49BV6416 0x00d6 - #define MANUFACTURER_SAMSUNG 0x00ec - -+/* Macronix */ -+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */ -+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */ -+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */ -+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */ -+ - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct - mtd->flags |= MTD_STUPID_LOCK; - } - -+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+/* -+ * Some Macronix chips has no/bad bootblock information in the CFI table -+ */ -+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param) -+{ -+ struct map_info *map = mtd->priv; -+ struct cfi_private *cfi = map->fldrv_priv; -+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv; -+ __u8 t; -+ -+ switch (cfi->id) { -+ /* TODO: put affected chip ids here */ -+ case MX29LV160B: -+ case MX29LV320B: -+ t = 2; /* Bottom boot */ -+ break; -+ case MX29LV160T: -+ case MX29LV320T: -+ t = 3; /* Top boot */ -+ break; -+ default: -+ return; -+ } -+ -+ if (extp->TopBottom == t) -+ /* boot location detected by the CFI layer is correct */ -+ return; -+ -+ extp->TopBottom = t; -+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced " -+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top"); -+} -+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */ -+ - static struct cfi_fixup cfi_fixup_table[] = { - #ifdef AMD_BOOTLOC_BUG - { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL }, -@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[ - { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, - #endif - { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, -+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, }, -+#endif - { 0, 0, NULL, NULL } - }; - static struct cfi_fixup jedec_fixup_table[] = { -Index: linux-2.6.21.5/drivers/mtd/chips/Kconfig -=================================================================== ---- linux-2.6.21.5.orig/drivers/mtd/chips/Kconfig -+++ linux-2.6.21.5/drivers/mtd/chips/Kconfig -@@ -199,6 +199,14 @@ config MTD_CFI_AMDSTD - provides support for one of those command sets, used on chips - including the AMD Am29LV320. - -+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+ bool "Force bottom boot for Macronix flash chips" -+ depends on MTD_CFI_AMDSTD -+ help -+ Some Macronix flash chips have no/wrong boot-block location in the -+ CFI table, and the driver may detect the type incorrectly. Select -+ this if your board has such chip. -+ - config MTD_CFI_STAA - tristate "Support for ST (Advanced Architecture) flash chips" - depends on MTD_GEN_PROBE diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch deleted file mode 100644 index d5edc23dc..000000000 --- a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch +++ /dev/null @@ -1,26 +0,0 @@ -Index: linux-2.6.21.1/arch/mips/kernel/head.S -=================================================================== ---- linux-2.6.21.1.orig/arch/mips/kernel/head.S -+++ linux-2.6.21.1/arch/mips/kernel/head.S -@@ -129,14 +129,19 @@ - #endif - .endm - -- - j kernel_entry - nop -- -+ nop -+ - /* - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. -+ * Use as temporary storage for the kernel command line, so that it -+ * can be updated easily without having to relink the kernel. - */ -+ -+EXPORT(_image_cmdline) -+ .ascii "CMDLINE:" - .align 10 - - EXPORT(stext) # used for profiling diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch deleted file mode 100644 index 8929a73fb..000000000 --- a/target/linux/adm5120-2.6/patches/500-Nand.patch +++ /dev/null @@ -1,29 +0,0 @@ -Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig -=================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/nand/Kconfig -+++ linux-2.6.21.1/drivers/mtd/nand/Kconfig -@@ -75,6 +75,12 @@ config MTD_NAND_TS7250 - help - Support for NAND flash on Technologic Systems TS-7250 platform. - -+config MTD_NAND_RB100 -+ tristate "NAND Flash device on RB100 board" -+ depends on MTD_NAND -+ help -+ Support for NAND flash on RB100 platform. -+ - config MTD_NAND_IDS - tristate - -Index: linux-2.6.21.1/drivers/mtd/nand/Makefile -=================================================================== ---- linux-2.6.21.1.orig/drivers/mtd/nand/Makefile -+++ linux-2.6.21.1/drivers/mtd/nand/Makefile -@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nan - obj-$(CONFIG_MTD_NAND_SPIA) += spia.o - obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o - obj-$(CONFIG_MTD_NAND_TOTO) += toto.o -+obj-$(CONFIG_MTD_NAND_RB100) += rbmipsnand.o - obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o - obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o diff --git a/target/linux/adm5120eb-2.6/patches b/target/linux/adm5120eb-2.6/patches deleted file mode 120000 index 0463621d5..000000000 --- a/target/linux/adm5120eb-2.6/patches +++ /dev/null @@ -1 +0,0 @@ -../adm5120-2.6/patches
\ No newline at end of file |