diff options
4 files changed, 27 insertions, 20 deletions
diff --git a/target/linux/xburst/patches-2.6.32/001-core.patch b/target/linux/xburst/patches-2.6.32/001-core.patch index 4ee44a529..26863d87e 100644 --- a/target/linux/xburst/patches-2.6.32/001-core.patch +++ b/target/linux/xburst/patches-2.6.32/001-core.patch @@ -30,9 +30,17 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/001-co config LASAT bool "LASAT Networks platforms" select CEVT_R4K +@@ -677,6 +680,7 @@ source "arch/mips/alchemy/Kconfig" + source "arch/mips/basler/excite/Kconfig" + source "arch/mips/bcm63xx/Kconfig" + source "arch/mips/jazz/Kconfig" ++source "arch/mips/jz4740/Kconfig" + source "arch/mips/lasat/Kconfig" + source "arch/mips/pmc-sierra/Kconfig" + source "arch/mips/sgi-ip27/Kconfig" --- a/arch/mips/Makefile +++ b/arch/mips/Makefile -@@ -184,6 +184,14 @@ cflags-$(CONFIG_AR7) += -I$(srctree)/ar +@@ -186,6 +186,14 @@ cflags-$(CONFIG_AR7) += -I$(srctree)/ar load-$(CONFIG_AR7) += 0xffffffff94100000 # @@ -47,7 +55,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/001-co # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. # core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -@@ -705,6 +713,12 @@ makeboot =$(Q)$(MAKE) $(build)=arch/mips +@@ -704,6 +712,12 @@ makeboot =$(Q)$(MAKE) $(build)=arch/mips all: $(all-y) @@ -60,7 +68,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/001-co vmlinux.bin: $(vmlinux-32) +@$(call makeboot,$@) -@@ -734,6 +748,7 @@ install: +@@ -733,6 +747,7 @@ install: archclean: @$(MAKE) $(clean)=arch/mips/boot @@ -68,7 +76,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/001-co @$(MAKE) $(clean)=arch/mips/lasat define archhelp -@@ -741,6 +756,9 @@ define archhelp +@@ -740,6 +755,9 @@ define archhelp echo ' vmlinux.ecoff - ECOFF boot image' echo ' vmlinux.bin - Raw binary boot image' echo ' vmlinux.srec - SREC boot image' @@ -533,7 +541,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/001-co const char *__cpu_name[NR_CPUS]; __cpuinit void cpu_probe(void) -@@ -939,6 +957,9 @@ __cpuinit void cpu_probe(void) +@@ -939,6 +955,9 @@ __cpuinit void cpu_probe(void) case PRID_COMP_CAVIUM: cpu_probe_cavium(c, cpu); break; diff --git a/target/linux/xburst/patches-2.6.32/050-nand.patch b/target/linux/xburst/patches-2.6.32/050-nand.patch index bdb1df8a3..9a8662b0a 100644 --- a/target/linux/xburst/patches-2.6.32/050-nand.patch +++ b/target/linux/xburst/patches-2.6.32/050-nand.patch @@ -31,4 +31,3 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/050-na +obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o nand-objs := nand_base.o nand_bbt.o - diff --git a/target/linux/xburst/patches-2.6.32/103-serial.patch b/target/linux/xburst/patches-2.6.32/103-serial.patch index 2401248a1..2810631f6 100644 --- a/target/linux/xburst/patches-2.6.32/103-serial.patch +++ b/target/linux/xburst/patches-2.6.32/103-serial.patch @@ -9,7 +9,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c -@@ -196,7 +196,7 @@ static const struct serial8250_config ua +@@ -199,7 +199,7 @@ static const struct serial8250_config ua [PORT_16550A] = { .name = "16550A", .fifo_size = 16, @@ -18,7 +18,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO, }, -@@ -403,6 +403,10 @@ static unsigned int mem_serial_in(struct +@@ -406,6 +406,10 @@ static unsigned int mem_serial_in(struct static void mem_serial_out(struct uart_port *p, int offset, int value) { offset = map_8250_out_reg(p, offset) << p->regshift; @@ -29,7 +29,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se writeb(value, p->membase + offset); } -@@ -2213,6 +2217,83 @@ static void serial8250_shutdown(struct u +@@ -2214,6 +2218,83 @@ static void serial8250_shutdown(struct u serial_unlink_irq_chain(up); } @@ -113,7 +113,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) { unsigned int quot; -@@ -2232,6 +2313,7 @@ static unsigned int serial8250_get_divis +@@ -2233,6 +2314,7 @@ static unsigned int serial8250_get_divis return quot; } @@ -121,7 +121,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se static void serial8250_set_termios(struct uart_port *port, struct ktermios *termios, -@@ -2241,6 +2323,9 @@ serial8250_set_termios(struct uart_port +@@ -2242,6 +2324,9 @@ serial8250_set_termios(struct uart_port unsigned char cval, fcr = 0; unsigned long flags; unsigned int baud, quot; @@ -131,7 +131,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se switch (termios->c_cflag & CSIZE) { case CS5: -@@ -2275,7 +2360,12 @@ serial8250_set_termios(struct uart_port +@@ -2276,7 +2361,12 @@ serial8250_set_termios(struct uart_port baud = uart_get_baud_rate(port, termios, old, port->uartclk / 16 / 0xffff, port->uartclk / 16); @@ -144,7 +144,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se /* * Oxford Semi 952 rev B workaround -@@ -2353,6 +2443,10 @@ serial8250_set_termios(struct uart_port +@@ -2354,6 +2444,10 @@ serial8250_set_termios(struct uart_port if (up->capabilities & UART_CAP_UUE) up->ier |= UART_IER_UUE | UART_IER_RTOIE; @@ -155,7 +155,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se serial_out(up, UART_IER, up->ier); if (up->capabilities & UART_CAP_EFR) { -@@ -2387,7 +2481,15 @@ serial8250_set_termios(struct uart_port +@@ -2388,7 +2482,15 @@ serial8250_set_termios(struct uart_port serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ } diff --git a/target/linux/xburst/patches-2.6.32/106-gpio-charger.patch b/target/linux/xburst/patches-2.6.32/106-gpio-charger.patch index dd1713a4d..641aba17c 100644 --- a/target/linux/xburst/patches-2.6.32/106-gpio-charger.patch +++ b/target/linux/xburst/patches-2.6.32/106-gpio-charger.patch @@ -1,13 +1,13 @@ ---- a/drivers/power/Makefile 2010-02-03 13:16:32.000000000 +0100 -+++ b/drivers/power/Makefile 2010-02-01 14:55:46.000000000 +0100 -@@ -30,3 +30,4 @@ +--- a/drivers/power/Makefile ++++ b/drivers/power/Makefile +@@ -30,3 +30,4 @@ obj-$(CONFIG_BATTERY_DA9030) += da9030_b obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o +obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o ---- a/drivers/power/Kconfig 2010-02-03 13:16:32.000000000 +0100 -+++ b/drivers/power/Kconfig 2010-02-01 14:58:24.000000000 +0100 -@@ -121,4 +121,11 @@ +--- a/drivers/power/Kconfig ++++ b/drivers/power/Kconfig +@@ -121,4 +121,11 @@ config BATTERY_JZ4740 This driver can be build as a module. If so, the module will be called jz4740-battery. |