summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh3
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom1
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/network2
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rw-r--r--target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h1
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig4
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile1
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c142
-rw-r--r--target/linux/ramips/image/Makefile9
-rw-r--r--target/linux/ramips/rt288x/config-2.6.391
-rw-r--r--target/linux/ramips/rt288x/profiles/belkin.mk18
11 files changed, 184 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 3cd5c0f9a..9e09e6907 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -36,6 +36,9 @@ get_status_led() {
esr-9753)
status_led="esr-9753:orange:power"
;;
+ f5d8235-v1)
+ set_usb_led "f5d8235-v1:green:usb"
+ ;;
fonera20n)
status_led="fonera20n:green:power"
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 47f7f016a..259c5d75f 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -41,6 +41,7 @@ case "$FIRMWARE" in
rt2x00_eeprom_extract "devconf" 0 272
;;
+ f5d8235-v1 | \
f5d8235-v2)
rt2x00_eeprom_extract "u-boot" 262144 272
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index f98162c6b..7e58ef043 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -35,6 +35,7 @@ ramips_setup_interfaces()
ucidef_set_interface_lan "eth0"
;;
+ f5d8235-v1 | \
rt-n15)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rtl8366s" "1" "1"
@@ -67,6 +68,7 @@ ramips_setup_macs()
argus-atp52b | \
b2c | \
+ f5d8235-v1 | \
nw718 | \
rt-n15 | \
wl-351)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index f05fc3d71..0a336eaec 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -65,6 +65,9 @@ ramips_board_name() {
*"ESR-9753")
name="esr-9753"
;;
+ *"F5D8235 v1")
+ name="f5d8235-v1"
+ ;;
*"F5D8235 v2")
name="f5d8235-v2"
;;
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index df6adf443..94eb4be4e 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -14,6 +14,7 @@
enum ramips_mach_type {
RAMIPS_MACH_GENERIC,
/* RT2880 based machines */
+ RAMIPS_MACH_F5D8235_V1, /* Belkin F5D8235 v1 */
RAMIPS_MACH_RT_N15, /* Asus RT-N15 */
RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */
RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
index c30b3ad1d..4189d9eef 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
@@ -2,6 +2,10 @@ if RALINK_RT288X
menu "Ralink RT288x machine selection"
+config RT288X_MACH_F5D8235_V1
+ bool "Belkin F5D8235 V1 board support"
+ select RALINK_DEV_GPIO_LEDS
+
config RT288X_MACH_RT_N15
bool "Asus RT-N15 board support"
select RALINK_DEV_GPIO_BUTTONS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
index ab707018d..5205706f3 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
@@ -13,6 +13,7 @@ obj-y := irq.o setup.o rt288x.o devices.o clock.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o
obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o
obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o
obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c
new file mode 100644
index 000000000..7db7e6f33
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c
@@ -0,0 +1,142 @@
+/*
+ * Belkin F5D825 V1 board support
+ *
+ * Copyright (C) 2011 Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/rt288x_regs.h>
+
+#include "devices.h"
+
+#include <linux/rtl8366.h>
+#include <linux/ethtool.h>
+
+#include <asm/mach-ralink/ramips_eth_platform.h>
+
+#define F5D8235_GPIO_RTL8366_SCK 2
+#define F5D8235_GPIO_RTL8366_SDA 1
+
+#define F5D8235_GPIO_LED_USB_BLUE 7
+#define F5D8235_GPIO_LED_USB_ORANGE 8
+#define F5D8235_GPIO_BUTTON_WPS 0
+#define F5D8235_GPIO_BUTTON_RESET 9
+
+#define F5D8235_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition f5d8235_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x050000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel and rootfs",
+ .offset = 0x050000,
+ .size = 0x790000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x1D0000,
+ .size = 0x610000,
+ }, {
+ .name = "nvram",
+ .offset = 0x7E0000,
+ .size = 0x010000,
+ }, {
+ .name = "factory",
+ .offset = 0x7F0000,
+ .size = 0x010000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data f5d8235_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .nr_parts = ARRAY_SIZE(f5d8235_partitions),
+ .parts = f5d8235_partitions,
+#endif
+};
+
+static struct rtl8366_platform_data f5d8235_rtl8366s_data = {
+ .gpio_sda = F5D8235_GPIO_RTL8366_SDA,
+ .gpio_sck = F5D8235_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device f5d8235_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &f5d8235_rtl8366s_data,
+ }
+};
+
+static struct gpio_led f5d8235_leds_gpio[] __initdata = {
+ {
+ .name = "f5d8234-v1:blue:storage",
+ .gpio = F5D8235_GPIO_LED_USB_BLUE,
+ .active_low = 1,
+ },{
+ .name = "f5d8234-v1:orange:storage",
+ .gpio = F5D8235_GPIO_LED_USB_ORANGE,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button f5d8235_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ .gpio = F5D8235_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .threshold = 3,
+ .gpio = F5D8235_GPIO_BUTTON_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init f5d8235_init(void)
+{
+ rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C);
+
+ rt288x_register_flash(0, &f5d8235_flash_data);
+ rt288x_register_wifi();
+ rt288x_register_wdt();
+
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235_leds_gpio),
+ f5d8235_leds_gpio);
+
+ ramips_register_gpio_buttons(-1, F5D8235_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(f5d8235_gpio_buttons),
+ f5d8235_gpio_buttons);
+
+ platform_device_register(&f5d8235_rtl8366s_device);
+
+ rt288x_eth_data.speed = SPEED_1000;
+ rt288x_eth_data.duplex = DUPLEX_FULL;
+ rt288x_eth_data.tx_fc = 1;
+ rt288x_eth_data.rx_fc = 1;
+ rt288x_register_ethernet();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_F5D8235_V1, "F5D8235_V1",
+ "Belkin F5D8235 v1", f5d8235_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index b661cab55..d177c04ba 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -257,6 +257,10 @@ define Image/Build/Profile/F5D8235V2
$(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
endef
+define Image/Build/Template/F5D8235V1
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
+endef
+
mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
@@ -265,7 +269,6 @@ define Image/Build/Profile/WR5123GN
$(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
endef
-
ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
@@ -290,6 +293,9 @@ define Image/Build/Profile/Default
endef
endif
+define Image/Build/Profile/F5D8235V1
+ $(call Image/Build/Template/F5D8235V1,$(1),f5d8235v1,F5D8235_V1)
+endef
define Image/Build/Profile/RTN15
$(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
@@ -302,6 +308,7 @@ endef
ifeq ($(CONFIG_RALINK_RT288X),y)
define Image/Build/Profile/Default
+ $(call Image/Build/Profile/F5D8235V1,$(1))
$(call Image/Build/Profile/RTN15,$(1))
$(call Image/Build/Profile/WLITX4AG300N,$(1))
endef
diff --git a/target/linux/ramips/rt288x/config-2.6.39 b/target/linux/ramips/rt288x/config-2.6.39
index a5fead582..5ad60af3a 100644
--- a/target/linux/ramips/rt288x/config-2.6.39
+++ b/target/linux/ramips/rt288x/config-2.6.39
@@ -92,6 +92,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
CONFIG_RALINK_RT288X=y
# CONFIG_RALINK_RT305X is not set
CONFIG_RAMIPS_WDT=y
+CONFIG_RT288X_MACH_F5D8235_V1=y
CONFIG_RT288X_MACH_RT_N15=y
CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
CONFIG_RT288X_MACH_WZR_AGL300NH=y
diff --git a/target/linux/ramips/rt288x/profiles/belkin.mk b/target/linux/ramips/rt288x/profiles/belkin.mk
new file mode 100644
index 000000000..608cee9cf
--- /dev/null
+++ b/target/linux/ramips/rt288x/profiles/belkin.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/F5D8235V1
+ NAME:=Belkin F5D8235 V1
+ PACKAGES:=kmod-switch-rtl8366s kmod-swconfig swconfig
+endef
+
+define Profile/F5D8235_V1/Description
+ Package set for Belkin F5D8235 V1
+endef
+
+$(eval $(call Profile,F5D8235V1))
+