summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ixp4xx/patches-2.6.27/500-usr8200_support.patch76
-rw-r--r--target/linux/ixp4xx/patches-2.6.27/501-cachetypes.patch20
2 files changed, 70 insertions, 26 deletions
diff --git a/target/linux/ixp4xx/patches-2.6.27/500-usr8200_support.patch b/target/linux/ixp4xx/patches-2.6.27/500-usr8200_support.patch
index 413fcae81..ef818c7ca 100644
--- a/target/linux/ixp4xx/patches-2.6.27/500-usr8200_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.27/500-usr8200_support.patch
@@ -116,7 +116,7 @@
+subsys_initcall(usr8200_pci_init);
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
-@@ -0,0 +1,187 @@
+@@ -0,0 +1,211 @@
+/*
+ * arch/arm/mach-ixp4xx/usr8200-setup.c
+ *
@@ -215,29 +215,35 @@
+ .resource = usr8200_uart_resources,
+};
+
-+/*
-+static struct i2c_gpio_platform_data usr8200_i2c_gpio_data = {
-+ .sda_pin = 9,
-+ .scl_pin = 10,
-+};
-+
-+static struct platform_device usr8200_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &usr8200_i2c_gpio_data,
-+ },
-+};
-+
+static struct gpio_led usr8200_led_pin[] = {
+ {
-+ .name = "usr8200:green:status",
-+ .gpio = 7,
++ .name = "usr8200:usb1",
++ .gpio = 0,
++ .active_low = 1,
++ },
++ {
++ .name = "usr8200:usb2",
++ .gpio = 1,
++ .active_low = 1,
++ },
++ {
++ .name = "usr8200:ieee1394",
++ .gpio = 2,
++ .active_low = 1,
++ },
++ {
++ .name = "usr8200:internal",
++ .gpio = 3,
++ .active_low = 1,
++ },
++ {
++ .name = "usr8200:power",
++ .gpio = 14,
+ }
+};
+
+static struct gpio_led_platform_data usr8200_led_data = {
-+ .num_leds = 1,
++ .num_leds = ARRAY_SIZE(usr8200_led_pin),
+ .leds = usr8200_led_pin,
+};
+
@@ -246,14 +252,14 @@
+ .id = -1,
+ .dev.platform_data = &usr8200_led_data,
+};
-+*/
+
+static struct eth_plat_info usr8200_plat_eth[] = {
-+ {
-+ .phy = 16,
++ { /* NPEC - LAN with Marvell 88E6060 switch */
++ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
++ .phy_mask = 0x0F0000,
+ .rxq = 4,
+ .txreadyq = 21,
-+ }, {
++ }, { /* NPEB - WAN */
+ .phy = 9,
+ .rxq = 3,
+ .txreadyq = 20,
@@ -272,13 +278,23 @@
+ }
+};
+
++static struct resource usr8200_rtc_resources = {
++ .flags = IORESOURCE_MEM
++};
++
++static struct platform_device usr8200_rtc = {
++ .name = "rtc7301",
++ .id = 0,
++ .resource = &usr8200_rtc_resources,
++};
++
+static struct platform_device *usr8200_devices[] __initdata = {
+ &usr8200_flash,
+ &usr8200_uart,
-+/* &usr8200_led,
-+ &usr8200_i2c_gpio, */
++ &usr8200_led,
+ &usr8200_eth[0],
+ &usr8200_eth[1],
++ &usr8200_rtc,
+};
+
+static void __init usr8200_init(void)
@@ -286,10 +302,18 @@
+ ixp4xx_sys_init();
+
+ usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
++ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
++
++ usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
++ usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
+
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++ *IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
++ IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
++ *IXP4XX_GPIO_GPCLKR = 0x01100000;
++
++ /* configure button as input */
++ gpio_line_config(12, IXP4XX_GPIO_IN);
+
+ platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
+}
diff --git a/target/linux/ixp4xx/patches-2.6.27/501-cachetypes.patch b/target/linux/ixp4xx/patches-2.6.27/501-cachetypes.patch
new file mode 100644
index 000000000..cc9c89e3e
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.27/501-cachetypes.patch
@@ -0,0 +1,20 @@
+--- a/arch/arm/kernel/setup.c
++++ b/arch/arm/kernel/setup.c
+@@ -184,7 +184,7 @@ static const char *cache_types[16] = {
+ "write-back",
+ "undefined 3",
+ "undefined 4",
+- "undefined 5",
++ "write-back",
+ "write-back",
+ "write-back",
+ "undefined 8",
+@@ -203,7 +203,7 @@ static const char *cache_clean[16] = {
+ "cp15 c7 ops",
+ "undefined 3",
+ "undefined 4",
+- "undefined 5",
++ "cp15 c7 ops",
+ "cp15 c7 ops",
+ "cp15 c7 ops",
+ "undefined 8",