diff options
20 files changed, 794 insertions, 250 deletions
diff --git a/target/linux/rb532/config-2.6.27 b/target/linux/rb532/config-2.6.27 index 34f8731a1..5d5aa6779 100644 --- a/target/linux/rb532/config-2.6.27 +++ b/target/linux/rb532/config-2.6.27 @@ -8,6 +8,7 @@ CONFIG_ARCH_REQUIRE_GPIOLIB=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_ATA_PIIX is not set CONFIG_ATA_SFF=y @@ -67,7 +68,6 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GPIOLIB=y -# CONFIG_GPIO_BT8XX is not set CONFIG_GPIO_SYSFS=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y @@ -108,7 +108,6 @@ CONFIG_KORINA=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_TMIO is not set CONFIG_MIKROTIK_RB532=y -CONFIG_MINI_FO=y CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set CONFIG_MIPS_L1_CACHE_SHIFT=4 @@ -140,8 +139,6 @@ CONFIG_MTD_CHAR=y # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_CONCAT is not set -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y @@ -177,12 +174,15 @@ CONFIG_MTD_PHYSMAP_START=0x8000000 # CONFIG_NATSEMI is not set # CONFIG_NET_SCH_ESFQ_NFCT is not set CONFIG_NF_CONNTRACK=y +CONFIG_NF_CT_ACCT=y # CONFIG_NO_IOPORT is not set CONFIG_PAGEFLAGS_EXTENDED=y # CONFIG_PAGE_SIZE_16KB is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_RB532=y # CONFIG_PATA_SCH is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y @@ -192,12 +192,15 @@ CONFIG_PCSPKR_PLATFORM=y # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_PROM_EMU is not set # CONFIG_R6040 is not set CONFIG_RC32434_WDT=y CONFIG_RFKILL_LEDS=y CONFIG_RTC_LIB=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCSI=y +CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set @@ -227,8 +230,18 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_TRAD_SIGNALS=y # CONFIG_VGASTATE is not set CONFIG_VIA_RHINE=y -# CONFIG_VIA_RHINE_MMIO is not set +CONFIG_VIA_RHINE_MMIO=y CONFIG_VIDEO_MEDIA=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_YAFFS_9BYTE_TAGS=y +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_AUTO_YAFFS2=y +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0 +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_YAFFS_YAFFS1=y +CONFIG_YAFFS_YAFFS2=y CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/rb532/patches-2.6.27/008-korina_fixes.patch b/target/linux/rb532/patches-2.6.27/008-korina_fixes.patch deleted file mode 100644 index 69483010b..000000000 --- a/target/linux/rb532/patches-2.6.27/008-korina_fixes.patch +++ /dev/null @@ -1,245 +0,0 @@ ---- linux-2.6.27.5/drivers/net/korina.c 2008-11-07 18:55:34.000000000 +0100 -+++ ../build_dir/linux-rb532/linux-2.6.27.5/drivers/net/korina.c 2008-11-16 00:38:19.000000000 +0100 -@@ -327,12 +327,11 @@ - - dmas = readl(&lp->rx_dma_regs->dmas); - if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) { -- netif_rx_schedule_prep(dev, &lp->napi); -- - dmasm = readl(&lp->rx_dma_regs->dmasm); - writel(dmasm | (DMA_STAT_DONE | - DMA_STAT_HALT | DMA_STAT_ERR), - &lp->rx_dma_regs->dmasm); -+ netif_rx_schedule(dev, &lp->napi); - - if (dmas & DMA_STAT_ERR) - printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name); -@@ -350,14 +349,24 @@ - struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done]; - struct sk_buff *skb, *skb_new; - u8 *pkt_buf; -- u32 devcs, pkt_len, dmas, rx_free_desc; -+ u32 devcs, pkt_len, dmas, pktuncrc_len; - int count; - - dma_cache_inv((u32)rd, sizeof(*rd)); - - for (count = 0; count < limit; count++) { -- -+ skb_new = NULL; - devcs = rd->devcs; -+ pkt_len = RCVPKT_LENGTH(devcs); -+ skb = lp->rx_skb[lp->rx_next_done]; -+ -+ if ((devcs & ETH_RX_LD) != ETH_RX_LD) { -+ /* check that this is a whole packet -+ * WARNING: DMA_FD bit incorrectly set -+ * in Rc32434 (errata ref #077) */ -+ dev->stats.rx_errors++; -+ dev->stats.rx_dropped++; -+ } - - /* Update statistics counters */ - if (devcs & ETH_RX_CRC) -@@ -375,75 +384,79 @@ - if (devcs & ETH_RX_MP) - dev->stats.multicast++; - -- if ((devcs & ETH_RX_LD) != ETH_RX_LD) { -- /* check that this is a whole packet -- * WARNING: DMA_FD bit incorrectly set -- * in Rc32434 (errata ref #077) */ -- dev->stats.rx_errors++; -- dev->stats.rx_dropped++; -- } -- -- while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) { -- /* init the var. used for the later -- * operations within the while loop */ -- skb_new = NULL; -- pkt_len = RCVPKT_LENGTH(devcs); -- skb = lp->rx_skb[lp->rx_next_done]; -- -- if ((devcs & ETH_RX_ROK)) { -- /* must be the (first and) last -- * descriptor then */ -- pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data; -+ else if ((devcs & ETH_RX_ROK)) { -+ /* must be the (first and) last -+ * descriptor then */ -+ pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data; -+ pktuncrc_len = pkt_len - 4; - -- /* invalidate the cache */ -- dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4); -+ /* invalidate the cache */ -+ dma_cache_inv((unsigned long)pkt_buf, pktuncrc_len); - -- /* Malloc up new buffer. */ -- skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2); -+ /* Malloc up new buffer. */ -+ skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2); - -- if (!skb_new) -- break; -+ if (skb_new) { - /* Do not count the CRC */ -- skb_put(skb, pkt_len - 4); -+ skb_put(skb, pktuncrc_len); - skb->protocol = eth_type_trans(skb, dev); - - /* Pass the packet to upper layers */ - netif_receive_skb(skb); -+ - dev->last_rx = jiffies; - dev->stats.rx_packets++; -- dev->stats.rx_bytes += pkt_len; -- -- /* Update the mcast stats */ -- if (devcs & ETH_RX_MP) -- dev->stats.multicast++; -- -+ dev->stats.rx_bytes += pktuncrc_len; -+ - lp->rx_skb[lp->rx_next_done] = skb_new; -+ } else { -+ dev->stats.rx_errors++; -+ dev->stats.rx_dropped++; - } -+ } else { -+ dev->stats.rx_errors++; -+ dev->stats.rx_dropped++; -+ -+ /* Update statistics counters */ -+ if (devcs & ETH_RX_CRC) -+ dev->stats.rx_crc_errors++; -+ else if (devcs & ETH_RX_LOR) -+ dev->stats.rx_length_errors++; -+ else if (devcs & ETH_RX_LE) -+ dev->stats.rx_length_errors++; -+ else if (devcs & ETH_RX_OVR) -+ dev->stats.rx_over_errors++; -+ else if (devcs & ETH_RX_CV) -+ dev->stats.rx_frame_errors++; -+ else if (devcs & ETH_RX_CES) -+ dev->stats.rx_length_errors++; -+ else if (devcs & ETH_RX_MP) -+ dev->stats.multicast++; -+ } - -- rd->devcs = 0; -+ rd->devcs = 0; - -- /* Restore descriptor's curr_addr */ -- if (skb_new) -- rd->ca = CPHYSADDR(skb_new->data); -- else -- rd->ca = CPHYSADDR(skb->data); -+ /* Restore descriptor's curr_addr */ -+ if (skb_new) -+ rd->ca = CPHYSADDR(skb_new->data); -+ else -+ rd->ca = CPHYSADDR(skb->data); - -- rd->control = DMA_COUNT(KORINA_RBSIZE) | -+ rd->control = DMA_COUNT(KORINA_RBSIZE) | - DMA_DESC_COD | DMA_DESC_IOD; -- lp->rd_ring[(lp->rx_next_done - 1) & -- KORINA_RDS_MASK].control &= -- ~DMA_DESC_COD; -- -- lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK; -- dma_cache_wback((u32)rd, sizeof(*rd)); -- rd = &lp->rd_ring[lp->rx_next_done]; -- writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas); -- } -+ lp->rd_ring[(lp->rx_next_done - 1) & -+ KORINA_RDS_MASK].control &= ~DMA_DESC_COD; -+ -+ lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK; -+ dma_cache_wback((u32)rd, sizeof(*rd)); -+ rd = &lp->rd_ring[lp->rx_next_done]; -+ writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas); - } - - dmas = readl(&lp->rx_dma_regs->dmas); - - if (dmas & DMA_STAT_HALT) { -+ /* Mask off halt and errors bits */ - writel(~(DMA_STAT_HALT | DMA_STAT_ERR), - &lp->rx_dma_regs->dmas); - -@@ -469,8 +482,9 @@ - if (work_done < budget) { - netif_rx_complete(dev, napi); - -+ /* Mask off interrupts */ - writel(readl(&lp->rx_dma_regs->dmasm) & -- ~(DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR), -+ (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR), - &lp->rx_dma_regs->dmasm); - } - return work_done; -@@ -534,10 +548,11 @@ - { - struct korina_private *lp = netdev_priv(dev); - struct dma_desc *td = &lp->td_ring[lp->tx_next_done]; -+ unsigned long flags; - u32 devcs; - u32 dmas; - -- spin_lock(&lp->lock); -+ spin_lock_irqsave(&lp->lock, flags); - - /* Process all desc that are done */ - while (IS_DMA_FINISHED(td->control)) { -@@ -610,7 +625,7 @@ - ~(DMA_STAT_FINI | DMA_STAT_ERR), - &lp->tx_dma_regs->dmasm); - -- spin_unlock(&lp->lock); -+ spin_unlock_irqrestore(&lp->lock, flags); - } - - static irqreturn_t -@@ -624,11 +639,10 @@ - dmas = readl(&lp->tx_dma_regs->dmas); - - if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) { -- korina_tx(dev); -- - dmasm = readl(&lp->tx_dma_regs->dmasm); - writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR), - &lp->tx_dma_regs->dmasm); -+ korina_tx(dev); - - if (lp->tx_chain_status == desc_filled && - (readl(&(lp->tx_dma_regs->dmandptr)) == 0)) { -@@ -1078,11 +1092,18 @@ - - static int korina_probe(struct platform_device *pdev) - { -- struct korina_device *bif = platform_get_drvdata(pdev); -+ struct korina_device *bif; - struct korina_private *lp; - struct net_device *dev; - struct resource *r; - int rc; -+ DECLARE_MAC_BUF(mac); -+ -+ bif = (struct korina_device *)pdev->dev.platform_data; -+ if (!bif) { -+ printk(KERN_ERR DRV_NAME ": missing platform_data\n"); -+ return -ENODEV; -+ } - - dev = alloc_etherdev(sizeof(struct korina_private)); - if (!dev) { -@@ -1172,6 +1193,7 @@ - ": cannot register net device %d\n", rc); - goto probe_err_register; - } -+ printk(KERN_INFO DRV_NAME ": registered %s, IRQ %d MAC %s\n", dev->name, dev->irq, print_mac(mac, dev->dev_addr)); - out: - return rc; - diff --git a/target/linux/rb532/patches-2.6.27/008-korina_reset_resource_buffer_size_1536.patch b/target/linux/rb532/patches-2.6.27/008-korina_reset_resource_buffer_size_1536.patch new file mode 100644 index 000000000..1db2e0ecb --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/008-korina_reset_resource_buffer_size_1536.patch @@ -0,0 +1,31 @@ +The new value is the one used in the external patch before and allows at +least a standard MTU of 1500 to be handled correctly. Impact of this +change gets visible when bigger packets are to be received, issuing: +| ping -s 492 <IP> +and bigger payload sized led to 100% packet loss. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + drivers/net/korina.c | 5 ++++- + 1 files changed, 4 insertions(+), 1 deletions(-) + +diff --git a/drivers/net/korina.c b/drivers/net/korina.c +index fefb33d..e30c2f4 100644 +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -84,7 +84,10 @@ + #define KORINA_NUM_RDS 64 /* number of receive descriptors */ + #define KORINA_NUM_TDS 64 /* number of transmit descriptors */ + +-#define KORINA_RBSIZE 536 /* size of one resource buffer = Ether MTU */ ++/* KORINA_RBSIZE is the hardware's default maximum receive ++ * frame size in bytes. Having this hardcoded means that there ++ * is no support for MTU sizes greater than 1500. */ ++#define KORINA_RBSIZE 1536 /* size of one resource buffer = Ether MTU */ + #define KORINA_RDS_MASK (KORINA_NUM_RDS - 1) + #define KORINA_TDS_MASK (KORINA_NUM_TDS - 1) + #define RD_RING_SIZE (KORINA_NUM_RDS * sizeof(struct dma_desc)) +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/009-korina_disable_napi_on_close_and_restart.patch b/target/linux/rb532/patches-2.6.27/009-korina_disable_napi_on_close_and_restart.patch new file mode 100644 index 000000000..4eec6fd05 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/009-korina_disable_napi_on_close_and_restart.patch @@ -0,0 +1,33 @@ +Without this the driver will crash when the NIC is being restarted. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + drivers/net/korina.c | 4 ++++ + 1 files changed, 4 insertions(+), 0 deletions(-) + +diff --git a/drivers/net/korina.c b/drivers/net/korina.c +index e30c2f4..65b8487 100644 +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -904,6 +904,8 @@ static int korina_restart(struct net_device *dev) + + korina_free_ring(dev); + ++ napi_disable(&lp->napi); ++ + ret = korina_init(dev); + if (ret < 0) { + printk(KERN_ERR DRV_NAME "%s: cannot restart device\n", +@@ -1070,6 +1072,8 @@ static int korina_close(struct net_device *dev) + + korina_free_ring(dev); + ++ napi_disable(&lp->napi); ++ + free_irq(lp->rx_irq, dev); + free_irq(lp->tx_irq, dev); + free_irq(lp->ovr_irq, dev); +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/010-korina_rework_korina_rx.patch b/target/linux/rb532/patches-2.6.27/010-korina_rework_korina_rx.patch new file mode 100644 index 000000000..177678b98 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/010-korina_rework_korina_rx.patch @@ -0,0 +1,138 @@ +This function needs an early exit condition to function properly, or +else caller assumes napi workload wasn't enough to handle all received +packets and korina_rx is called again (and again and again and ...). + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- +--- a/drivers/net/korina.c 2009-01-19 23:19:10.000000000 +0100 ++++ b/drivers/net/korina.c 2009-01-19 23:25:31.000000000 +0100 +@@ -353,15 +353,20 @@ + struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done]; + struct sk_buff *skb, *skb_new; + u8 *pkt_buf; +- u32 devcs, pkt_len, dmas, rx_free_desc; ++ u32 devcs, pkt_len, dmas; + int count; + + dma_cache_inv((u32)rd, sizeof(*rd)); + + for (count = 0; count < limit; count++) { ++ skb = lp->rx_skb[lp->rx_next_done]; ++ skb_new = NULL; + + devcs = rd->devcs; + ++ if ((KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) == 0) ++ break; ++ + /* Update statistics counters */ + if (devcs & ETH_RX_CRC) + dev->stats.rx_crc_errors++; +@@ -384,64 +389,53 @@ + * in Rc32434 (errata ref #077) */ + dev->stats.rx_errors++; + dev->stats.rx_dropped++; +- } +- +- while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) { +- /* init the var. used for the later +- * operations within the while loop */ +- skb_new = NULL; ++ } else if ((devcs & ETH_RX_ROK)) { + pkt_len = RCVPKT_LENGTH(devcs); +- skb = lp->rx_skb[lp->rx_next_done]; ++ /* must be the (first and) last ++ * descriptor then */ ++ pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data; ++ ++ /* invalidate the cache */ ++ dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4); ++ ++ /* Malloc up new buffer. */ ++ skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2); ++ ++ if (!skb_new) ++ break; ++ /* Do not count the CRC */ ++ skb_put(skb, pkt_len - 4); ++ skb->protocol = eth_type_trans(skb, dev); ++ ++ /* Pass the packet to upper layers */ ++ netif_receive_skb(skb); ++ dev->stats.rx_packets++; ++ dev->stats.rx_bytes += pkt_len; ++ ++ /* Update the mcast stats */ ++ if (devcs & ETH_RX_MP) ++ dev->stats.multicast++; + +- if ((devcs & ETH_RX_ROK)) { +- /* must be the (first and) last +- * descriptor then */ +- pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data; +- +- /* invalidate the cache */ +- dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4); +- +- /* Malloc up new buffer. */ +- skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2); +- +- if (!skb_new) +- break; +- /* Do not count the CRC */ +- skb_put(skb, pkt_len - 4); +- skb->protocol = eth_type_trans(skb, dev); +- +- /* Pass the packet to upper layers */ +- netif_receive_skb(skb); +- dev->last_rx = jiffies; +- dev->stats.rx_packets++; +- dev->stats.rx_bytes += pkt_len; +- +- /* Update the mcast stats */ +- if (devcs & ETH_RX_MP) +- dev->stats.multicast++; +- +- lp->rx_skb[lp->rx_next_done] = skb_new; +- } +- +- rd->devcs = 0; +- +- /* Restore descriptor's curr_addr */ +- if (skb_new) +- rd->ca = CPHYSADDR(skb_new->data); +- else +- rd->ca = CPHYSADDR(skb->data); ++ lp->rx_skb[lp->rx_next_done] = skb_new; ++ } ++ rd->devcs = 0; ++ ++ /* Restore descriptor's curr_addr */ ++ if (skb_new) ++ rd->ca = CPHYSADDR(skb_new->data); ++ else ++ rd->ca = CPHYSADDR(skb->data); + +- rd->control = DMA_COUNT(KORINA_RBSIZE) | ++ rd->control = DMA_COUNT(KORINA_RBSIZE) | + DMA_DESC_COD | DMA_DESC_IOD; +- lp->rd_ring[(lp->rx_next_done - 1) & +- KORINA_RDS_MASK].control &= +- ~DMA_DESC_COD; +- +- lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK; +- dma_cache_wback((u32)rd, sizeof(*rd)); +- rd = &lp->rd_ring[lp->rx_next_done]; +- writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas); +- } ++ lp->rd_ring[(lp->rx_next_done - 1) & ++ KORINA_RDS_MASK].control &= ++ ~DMA_DESC_COD; ++ ++ lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK; ++ dma_cache_wback((u32)rd, sizeof(*rd)); ++ rd = &lp->rd_ring[lp->rx_next_done]; ++ writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas); + } + + dmas = readl(&lp->rx_dma_regs->dmas); diff --git a/target/linux/rb532/patches-2.6.27/011-korina_do_schedule_napi_after_testing_it.patch b/target/linux/rb532/patches-2.6.27/011-korina_do_schedule_napi_after_testing_it.patch new file mode 100644 index 000000000..c5e1b9a40 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/011-korina_do_schedule_napi_after_testing_it.patch @@ -0,0 +1,18 @@ +The called netif_rx_schedule() does all the work for us: +- it checks the return value of netif_rx_schedule_prep() and +- if everything is ok calls __netif_rx_schedule(). +Before this change, the driver received absolutely nothing. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- +--- a/drivers/net/korina.c 2009-01-19 23:26:19.000000000 +0100 ++++ b/drivers/net/korina.c 2009-01-19 23:27:06.000000000 +0100 +@@ -330,7 +330,7 @@ + + dmas = readl(&lp->rx_dma_regs->dmas); + if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) { +- netif_rx_schedule_prep(dev, &lp->napi); ++ netif_rx_schedule(dev, &lp->napi); + + dmasm = readl(&lp->rx_dma_regs->dmasm); + writel(dmasm | (DMA_STAT_DONE | diff --git a/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch b/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch new file mode 100644 index 000000000..101e869d0 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch @@ -0,0 +1,40 @@ +Triggering TX before the write to the DMA status mask register leads to +transferring packets with maximum payload no matter what the actual +packet size is. +While here, also trigger RX scheduling after writing the DMA status mask +register, like it was in the original driver before it was sent +upstream. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- +--- a/drivers/net/korina.c 2009-01-19 23:27:41.000000000 +0100 ++++ b/drivers/net/korina.c 2009-01-19 23:29:08.000000000 +0100 +@@ -330,12 +330,12 @@ + + dmas = readl(&lp->rx_dma_regs->dmas); + if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) { +- netif_rx_schedule(dev, &lp->napi); +- + dmasm = readl(&lp->rx_dma_regs->dmasm); + writel(dmasm | (DMA_STAT_DONE | + DMA_STAT_HALT | DMA_STAT_ERR), + &lp->rx_dma_regs->dmasm); ++ ++ netif_rx_schedule(dev, &lp->napi); + + if (dmas & DMA_STAT_ERR) + printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name); +@@ -621,11 +621,11 @@ + dmas = readl(&lp->tx_dma_regs->dmas); + + if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) { +- korina_tx(dev); +- + dmasm = readl(&lp->tx_dma_regs->dmasm); + writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR), + &lp->tx_dma_regs->dmasm); ++ ++ korina_tx(dev); + + if (lp->tx_chain_status == desc_filled && + (readl(&(lp->tx_dma_regs->dmandptr)) == 0)) { diff --git a/target/linux/rb532/patches-2.6.27/013-korina_fix_handling_tx_chain_tail.patch b/target/linux/rb532/patches-2.6.27/013-korina_fix_handling_tx_chain_tail.patch new file mode 100644 index 000000000..6babc3230 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/013-korina_fix_handling_tx_chain_tail.patch @@ -0,0 +1,87 @@ +Originally this must have been a rewrite error when introducing +'chain_index'. But the original driver did not use the previous chain +item everywhere: when altering the address tx_chain_tail points to, it +should move forward, not backwards. +Also this is not an "index" but rather the penultimate element in the +chain, so rename it accordingly. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + drivers/net/korina.c | 22 +++++++++++----------- + 1 files changed, 11 insertions(+), 11 deletions(-) + +diff --git a/drivers/net/korina.c b/drivers/net/korina.c +index dced5e7..f200175 100644 +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -199,7 +199,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) + struct korina_private *lp = netdev_priv(dev); + unsigned long flags; + u32 length; +- u32 chain_index; ++ u32 chain_prev, chain_next; + struct dma_desc *td; + + spin_lock_irqsave(&lp->lock, flags); +@@ -231,8 +231,8 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) + /* Setup the transmit descriptor. */ + dma_cache_inv((u32) td, sizeof(*td)); + td->ca = CPHYSADDR(skb->data); +- chain_index = (lp->tx_chain_tail - 1) & +- KORINA_TDS_MASK; ++ chain_prev = (lp->tx_chain_tail - 1) & KORINA_TDS_MASK; ++ chain_next = (lp->tx_chain_tail + 1) & KORINA_TDS_MASK; + + if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) { + if (lp->tx_chain_status == desc_empty) { +@@ -240,7 +240,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) + td->control = DMA_COUNT(length) | + DMA_DESC_COF | DMA_DESC_IOF; + /* Move tail */ +- lp->tx_chain_tail = chain_index; ++ lp->tx_chain_tail = chain_next; + /* Write to NDPTR */ + writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), + &lp->tx_dma_regs->dmandptr); +@@ -251,12 +251,12 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) + td->control = DMA_COUNT(length) | + DMA_DESC_COF | DMA_DESC_IOF; + /* Link to prev */ +- lp->td_ring[chain_index].control &= ++ lp->td_ring[chain_prev].control &= + ~DMA_DESC_COF; + /* Link to prev */ +- lp->td_ring[chain_index].link = CPHYSADDR(td); ++ lp->td_ring[chain_prev].link = CPHYSADDR(td); + /* Move tail */ +- lp->tx_chain_tail = chain_index; ++ lp->tx_chain_tail = chain_next; + /* Write to NDPTR */ + writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), + &(lp->tx_dma_regs->dmandptr)); +@@ -270,17 +270,17 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) + td->control = DMA_COUNT(length) | + DMA_DESC_COF | DMA_DESC_IOF; + /* Move tail */ +- lp->tx_chain_tail = chain_index; ++ lp->tx_chain_tail = chain_next; + lp->tx_chain_status = desc_filled; + netif_stop_queue(dev); + } else { + /* Update tail */ + td->control = DMA_COUNT(length) | + DMA_DESC_COF | DMA_DESC_IOF; +- lp->td_ring[chain_index].control &= ++ lp->td_ring[chain_prev].control &= + ~DMA_DESC_COF; +- lp->td_ring[chain_index].link = CPHYSADDR(td); +- lp->tx_chain_tail = chain_index; ++ lp->td_ring[chain_prev].link = CPHYSADDR(td); ++ lp->tx_chain_tail = chain_next; + } + } + dma_cache_wback((u32) td, sizeof(*td)); +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/014-korina_do_not_stop_queue_here.patch b/target/linux/rb532/patches-2.6.27/014-korina_do_not_stop_queue_here.patch new file mode 100644 index 000000000..79ae024b6 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/014-korina_do_not_stop_queue_here.patch @@ -0,0 +1,25 @@ +Apparently this doesn't make sense. Otherwise the queue gets disabled as +soon as it's getting empty and can only be resurrected by a driver +restart. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + drivers/net/korina.c | 1 - + 1 files changed, 0 insertions(+), 1 deletions(-) + +diff --git a/drivers/net/korina.c b/drivers/net/korina.c +index f200175..bd33fa9 100644 +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -272,7 +272,6 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) + /* Move tail */ + lp->tx_chain_tail = chain_next; + lp->tx_chain_status = desc_filled; +- netif_stop_queue(dev); + } else { + /* Update tail */ + td->control = DMA_COUNT(length) | +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/015-korina_irqf_flags.patch b/target/linux/rb532/patches-2.6.27/015-korina_irqf_flags.patch new file mode 100644 index 000000000..74059fbeb --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/015-korina_irqf_flags.patch @@ -0,0 +1,53 @@ +As the kernel warning states: "IRQF_DISABLED is not guaranteed on shared +IRQs". Since these IRQs' values are hardcoded and my test system doesn't +show any shared use of IRQs at all, rather make them non-shared than +non-disabled. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + drivers/net/korina.c | 8 ++++---- + 1 files changed, 4 insertions(+), 4 deletions(-) + +diff --git a/drivers/net/korina.c b/drivers/net/korina.c +index bd33fa9..1d6e48e 100644 +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -1000,14 +1000,14 @@ static int korina_open(struct net_device *dev) + * that handles the Done Finished + * Ovr and Und Events */ + ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt, +- IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev); ++ IRQF_DISABLED, "Korina ethernet Rx", dev); + if (ret < 0) { + printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n", + dev->name, lp->rx_irq); + goto err_release; + } + ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt, +- IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev); ++ IRQF_DISABLED, "Korina ethernet Tx", dev); + if (ret < 0) { + printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n", + dev->name, lp->tx_irq); +@@ -1016,7 +1016,7 @@ static int korina_open(struct net_device *dev) + + /* Install handler for overrun error. */ + ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt, +- IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev); ++ IRQF_DISABLED, "Ethernet Overflow", dev); + if (ret < 0) { + printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n", + dev->name, lp->ovr_irq); +@@ -1025,7 +1025,7 @@ static int korina_open(struct net_device *dev) + + /* Install handler for underflow error. */ + ret = request_irq(lp->und_irq, &korina_und_interrupt, +- IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev); ++ IRQF_DISABLED, "Ethernet Underflow", dev); + if (ret < 0) { + printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n", + dev->name, lp->und_irq); +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/016-korina_drop_left_over_assignment.patch b/target/linux/rb532/patches-2.6.27/016-korina_drop_left_over_assignment.patch new file mode 100644 index 000000000..ab82cb5af --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/016-korina_drop_left_over_assignment.patch @@ -0,0 +1,34 @@ +As the assigned value is being overwritten shortly after, it can be +dropped and so the whole variable definition moved to the start of the +function. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + drivers/net/korina.c | 3 +-- + 1 files changed, 1 insertions(+), 2 deletions(-) + +diff --git a/drivers/net/korina.c b/drivers/net/korina.c +index 60ae7bf..75010ca 100644 +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -743,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = { + static void korina_alloc_ring(struct net_device *dev) + { + struct korina_private *lp = netdev_priv(dev); ++ struct sk_buff *skb; + int i; + + /* Initialize the transmit descriptors */ +@@ -758,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev) + + /* Initialize the receive descriptors */ + for (i = 0; i < KORINA_NUM_RDS; i++) { +- struct sk_buff *skb = lp->rx_skb[i]; +- + skb = dev_alloc_skb(KORINA_RBSIZE + 2); + if (!skb) + break; +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/017-korina_fix_loop_back_rx_desc.patch b/target/linux/rb532/patches-2.6.27/017-korina_fix_loop_back_rx_desc.patch new file mode 100644 index 000000000..0484f2cbe --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/017-korina_fix_loop_back_rx_desc.patch @@ -0,0 +1,36 @@ +After the last loop iteration, i has the value RC32434_NUM_RDS and +therefore leads to an index overflow when used afterwards to address the +last element. This is yet another another bug introduced when rewriting +parts of the driver for upstream preparation, as the original driver +used 'RC32434_NUM_RDS - 1' instead. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + drivers/net/korina.c | 9 +++++---- + 1 files changed, 5 insertions(+), 4 deletions(-) + +diff --git a/drivers/net/korina.c b/drivers/net/korina.c +index 1d6e48e..67fbdf4 100644 +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -769,11 +769,12 @@ static void korina_alloc_ring(struct net_device *dev) + lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]); + } + +- /* loop back */ +- lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]); +- lp->rx_next_done = 0; ++ /* loop back receive descriptors, so the last ++ * descriptor points to the first one */ ++ lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]); ++ lp->rd_ring[i - 1].control |= DMA_DESC_COD; + +- lp->rd_ring[i].control |= DMA_DESC_COD; ++ lp->rx_next_done = 0; + lp->rx_chain_head = 0; + lp->rx_chain_tail = 0; + lp->rx_chain_status = desc_empty; +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/018-korina_adjust_headroom.patch b/target/linux/rb532/patches-2.6.27/018-korina_adjust_headroom.patch new file mode 100644 index 000000000..f9f8daccc --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/018-korina_adjust_headroom.patch @@ -0,0 +1,28 @@ +This is copy and paste from the original driver. As skb_reserve() is +also called within korina_alloc_ring() when initially allocating the +receive descriptors, the same should be done when allocating new space +after passing an skb to upper layers. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + drivers/net/korina.c | 3 +++ + 1 files changed, 3 insertions(+), 0 deletions(-) + +diff --git a/drivers/net/korina.c b/drivers/net/korina.c +index 67fbdf4..60ae7bf 100644 +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit) + if (devcs & ETH_RX_MP) + dev->stats.multicast++; + ++ /* 16 bit align */ ++ skb_reserve(skb_new, 2); ++ + lp->rx_skb[lp->rx_next_done] = skb_new; + } + +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/019-korina_set_dev_field_allocated_skb.patch b/target/linux/rb532/patches-2.6.27/019-korina_set_dev_field_allocated_skb.patch new file mode 100644 index 000000000..bec351488 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/019-korina_set_dev_field_allocated_skb.patch @@ -0,0 +1,33 @@ +I'm not sure if this is necessary, but the original driver did it and +apparently also many other drivers do it, so it should not be completely +wrong to do it. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + drivers/net/korina.c | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +diff --git a/drivers/net/korina.c b/drivers/net/korina.c +index 75010ca..56b4db2 100644 +--- a/drivers/net/korina.c ++++ b/drivers/net/korina.c +@@ -419,6 +419,7 @@ static int korina_rx(struct net_device *dev, int limit) + /* 16 bit align */ + skb_reserve(skb_new, 2); + ++ skb_new->dev = dev; + lp->rx_skb[lp->rx_next_done] = skb_new; + } + +@@ -763,6 +764,7 @@ static void korina_alloc_ring(struct net_device *dev) + if (!skb) + break; + skb_reserve(skb, 2); ++ skb->dev = dev; + lp->rx_skb[i] = skb; + lp->rd_ring[i].control = DMA_DESC_IOD | + DMA_COUNT(KORINA_RBSIZE); +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/009-rc32434_res_name.patch b/target/linux/rb532/patches-2.6.27/020-rc32434_res_name.patch index e61ec8330..e61ec8330 100644 --- a/target/linux/rb532/patches-2.6.27/009-rc32434_res_name.patch +++ b/target/linux/rb532/patches-2.6.27/020-rc32434_res_name.patch diff --git a/target/linux/rb532/patches-2.6.27/021-rb532_driver_data.patch b/target/linux/rb532/patches-2.6.27/021-rb532_driver_data.patch new file mode 100644 index 000000000..9aaeef334 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/021-rb532_driver_data.patch @@ -0,0 +1,26 @@ +As the korina ethernet driver uses platform_get_drvdata() to extract the +driver specific data from the platform device, driver_data has to be +used here. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + arch/mips/rb532/devices.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c +index 9b6b744..3c74561 100644 +--- a/arch/mips/rb532/devices.c ++++ b/arch/mips/rb532/devices.c +@@ -89,7 +89,7 @@ static struct korina_device korina_dev0_data = { + static struct platform_device korina_dev0 = { + .id = -1, + .name = "korina", +- .dev.platform_data = &korina_dev0_data, ++ .dev.driver_data = &korina_dev0_data, + .resource = korina_dev0_res, + .num_resources = ARRAY_SIZE(korina_dev0_res), + }; +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/022-rb532_uart_autodetect.patch b/target/linux/rb532/patches-2.6.27/022-rb532_uart_autodetect.patch new file mode 100644 index 000000000..ae42a4dbc --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/022-rb532_uart_autodetect.patch @@ -0,0 +1,91 @@ +Auto-detection works just fine, so use it instead of specifying the type +manually. Also define a platform device for the uart, as suggested by +David Daney. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- + arch/mips/rb532/devices.c | 26 ++++++++++++++++++++++++++ + arch/mips/rb532/serial.c | 2 +- + 2 files changed, 27 insertions(+), 1 deletions(-) + +diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c +index c1c2918..9b6b744 100644 +--- a/arch/mips/rb532/devices.c ++++ b/arch/mips/rb532/devices.c +@@ -24,6 +24,7 @@ + #include <linux/mtd/partitions.h> + #include <linux/gpio_keys.h> + #include <linux/input.h> ++#include <linux/serial_8250.h> + + #include <asm/bootinfo.h> + +@@ -39,6 +40,8 @@ + #define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET) + #define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET) + ++extern unsigned int idt_cpu_freq; ++ + static struct resource korina_dev0_res[] = { + { + .name = "korina_regs", +@@ -214,12 +217,32 @@ static struct platform_device rb532_wdt = { + .num_resources = ARRAY_SIZE(rb532_wdt_res), + }; + ++static struct plat_serial8250_port rb532_uart_res[] = { ++ { ++ .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE), ++ .irq = UART0_IRQ, ++ .regshift = 2, ++ .iotype = UPIO_MEM, ++ .flags = UPF_BOOT_AUTOCONF, ++ }, ++ { ++ .flags = 0, ++ } ++}; ++ ++static struct platform_device rb532_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev.platform_data = &rb532_uart_res, ++}; ++ + static struct platform_device *rb532_devs[] = { + &korina_dev0, + &nand_slot0, + &cf_slot0, + &rb532_led, + &rb532_button, ++ &rb532_uart, + &rb532_wdt + }; + +@@ -294,6 +317,9 @@ static int __init plat_setup_devices(void) + /* Initialise the NAND device */ + rb532_nand_setup(); + ++ /* set the uart clock to the current cpu frequency */ ++ rb532_uart_res[0].uartclk = idt_cpu_freq; ++ + return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs)); + } + +diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c +index 3e0d7ec..00ed19f 100644 +--- a/arch/mips/rb532/serial.c ++++ b/arch/mips/rb532/serial.c +@@ -36,7 +36,7 @@ + extern unsigned int idt_cpu_freq; + + static struct uart_port rb532_uart = { +- .type = PORT_16550A, ++ .flags = UPF_BOOT_AUTOCONF, + .line = 0, + .irq = UART0_IRQ, + .iotype = UPIO_MEM, +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch b/target/linux/rb532/patches-2.6.27/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch new file mode 100644 index 000000000..64a6d8934 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/023-rb532_fix_init_of_rb532_dev3_ctl_res.patch @@ -0,0 +1,32 @@ +This register just contains the address of the actual resource, so +initialisation has to be the same as cf_slot0_res and nand_slot0_res. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- +diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c +index d75eb19..40deb11 100644 +--- a/arch/mips/rb532/gpio.c ++++ b/arch/mips/rb532/gpio.c +@@ -55,8 +55,6 @@ static struct resource rb532_gpio_reg0_res[] = { + static struct resource rb532_dev3_ctl_res[] = { + { + .name = "dev3_ctl", +- .start = REGBASE + DEV3BASE, +- .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1, + .flags = IORESOURCE_MEM, + } + }; +@@ -243,6 +241,9 @@ int __init rb532_gpio_init(void) + /* Register our GPIO chip */ + gpiochip_add(&rb532_gpio_chip->chip); + ++ rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE); ++ rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000; ++ + r = rb532_dev3_ctl_res; + dev3.base = ioremap_nocache(r->start, r->end - r->start); + +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/024-rb532_fix_set_latch_u5.patch b/target/linux/rb532/patches-2.6.27/024-rb532_fix_set_latch_u5.patch new file mode 100644 index 000000000..fc0c77ec2 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/024-rb532_fix_set_latch_u5.patch @@ -0,0 +1,23 @@ +The data to be written is just a byte, so use writeb instead of writel. +Also, dev3.base contains the address, not the data so referencing here +is wrong. + +Signed-off-by: Phil Sutter <n0-1@freewrt.org> +--- +diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c +index 40deb11..7e0cb4f 100644 +--- a/arch/mips/rb532/gpio.c ++++ b/arch/mips/rb532/gpio.c +@@ -93,7 +93,7 @@ void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) + spin_lock_irqsave(&dev3.lock, flags); + + dev3.state = (dev3.state | or_mask) & ~nand_mask; +- writel(dev3.state, &dev3.base); ++ writeb(dev3.state, dev3.base); + + spin_unlock_irqrestore(&dev3.lock, flags); + } +-- +1.5.6.4 + + diff --git a/target/linux/rb532/patches-2.6.27/025-rb532_nand_fixup.patch b/target/linux/rb532/patches-2.6.27/025-rb532_nand_fixup.patch new file mode 100644 index 000000000..709160980 --- /dev/null +++ b/target/linux/rb532/patches-2.6.27/025-rb532_nand_fixup.patch @@ -0,0 +1,48 @@ +--- a/arch/mips/rb532/devices.c 2009-01-25 13:36:15.000000000 +0100 ++++ b/arch/mips/rb532/devices.c 2009-01-25 14:00:56.000000000 +0100 +@@ -119,6 +119,19 @@ + }; + + /* Resources and device for NAND */ ++ ++/* ++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader ++ * will not be able to find the kernel that we load. So set the oobinfo ++ * when creating the partitions ++ */ ++static struct nand_ecclayout rb532_nand_ecclayout = { ++ .eccbytes = 6, ++ .eccpos = { 8, 9, 10, 13, 14, 15 }, ++ .oobavail = 9, ++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } ++}; ++ + static int rb532_dev_ready(struct mtd_info *mtd) + { + return gpio_get_value(GPIO_RDY); +@@ -277,6 +290,16 @@ + /* NAND definitions */ + #define NAND_CHIP_DELAY 25 + ++static int rb532_nand_fixup(struct mtd_info *mtd) ++{ ++ struct nand_chip *chip = mtd->priv; ++ ++ if (mtd->writesize == 512) ++ chip->ecc.layout = &rb532_nand_ecclayout; ++ ++ return 0; ++} ++ + static void __init rb532_nand_setup(void) + { + switch (mips_machtype) { +@@ -296,6 +319,8 @@ + rb532_nand_data.chip.partitions = rb532_partition_info; + rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY; + rb532_nand_data.chip.options = NAND_NO_AUTOINCR; ++ ++ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup; + } + + |