diff options
| -rw-r--r-- | package/uboot-ifxmips/Config.in | 5 | ||||
| -rw-r--r-- | package/uboot-ifxmips/Makefile | 13 | ||||
| -rw-r--r-- | package/uboot-ifxmips/files/board/ifx/danube/flash.c | 10 | ||||
| -rw-r--r-- | package/uboot-ifxmips/patches/130-a800.patch | 33 |
4 files changed, 49 insertions, 12 deletions
diff --git a/package/uboot-ifxmips/Config.in b/package/uboot-ifxmips/Config.in new file mode 100644 index 000000000..4562fc8ef --- /dev/null +++ b/package/uboot-ifxmips/Config.in @@ -0,0 +1,5 @@ +config IFXMIPS_UBOOT_A800 + bool "add ARV452 Switch bringup hack" + depends on PACKAGE_uboot-ifxmips + help + Say Y, if you have a arv452 board (wav-281, A800, ..) diff --git a/package/uboot-ifxmips/Makefile b/package/uboot-ifxmips/Makefile index ade82bf7b..e51a40ad7 100644 --- a/package/uboot-ifxmips/Makefile +++ b/package/uboot-ifxmips/Makefile @@ -34,6 +34,10 @@ define Build/Prepare find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf endef +define Package/uboot-ifxmips/config + source "$(SOURCE)/Config.in" +endef + UBOOT_CONFIG:=danube UBOOT_MAKE_OPTS:=\ @@ -43,6 +47,11 @@ UBOOT_MAKE_OPTS:=\ PLATFORM_CPU=mips32r2 \ UBOOT_RAM_TEXT_BASE=0xA0400000 +A800_FIX:= +ifeq ($(CONFIG_IFXMIPS_UBOOT_A800),y) +A800_FIX += -DA800_SWITCH +endif + define Build/Configure $(MAKE) -s -C $(PKG_BUILD_DIR) \ $(UBOOT_MAKE_OPTS) \ @@ -52,7 +61,7 @@ endef define Build/Compile $(MAKE) -C $(PKG_BUILD_DIR) \ $(UBOOT_MAKE_OPTS) \ - OWRT_FLAGS="-DTEXT_BASE=0xa0400000" \ + OWRT_FLAGS="-DTEXT_BASE=0xa0400000 ${A800_FIX}" \ ifx_all $(CP) $(PKG_BUILD_DIR)/u-boot.srec $(PKG_BUILD_DIR)/asc.srec $(PKG_BUILD_DIR)/gct \ @@ -61,7 +70,7 @@ define Build/Compile $(PKG_BUILD_DIR)/u-boot.asc $(MAKE) -C $(PKG_BUILD_DIR) \ $(UBOOT_MAKE_OPTS) \ - OWRT_FLAGS="-DDANUBE_BOOT_FROM_EBU=1 -DTEXT_BASE=0xB0000000" \ + OWRT_FLAGS="-DDANUBE_BOOT_FROM_EBU=1 -DTEXT_BASE=0xB0000000 ${A800_FIX}" \ clean ifx_all endef diff --git a/package/uboot-ifxmips/files/board/ifx/danube/flash.c b/package/uboot-ifxmips/files/board/ifx/danube/flash.c index bc919c1c1..d95888fdf 100644 --- a/package/uboot-ifxmips/files/board/ifx/danube/flash.c +++ b/package/uboot-ifxmips/files/board/ifx/danube/flash.c @@ -83,12 +83,10 @@ unsigned long flash_init (void) unsigned long size = 0; int i; - printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__); /* Init: no FLASHes known */ for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) { // 1 bank ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2; // 0xb0000000, 0xb4000000 - printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__); volatile ulong * buscon = (ulong *) ((i == 0) ? DANUBE_EBU_BUSCON0 : DANUBE_EBU_BUSCON1); @@ -96,12 +94,10 @@ unsigned long flash_init (void) // *buscon &= ~AMAZON_EBU_BUSCON0_WRDIS; /* Enable write protection */ *buscon |= DANUBE_EBU_BUSCON0_WRDIS; -printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__); #if 1 memset(&flash_info[i], 0, sizeof(flash_info_t)); #endif -printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__); flash_info[i].size = flash_get_size((FPW *)flashbase, &flash_info[i]); @@ -463,23 +459,19 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) // asm("SYNC"); switch (addr[1] & 0xff) { case (uchar)AMD_MANUFACT: - printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__); info->flash_id = FLASH_MAN_AMD; break; case (uchar)INTEL_MANUFACT: // 0x0089 - printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__); info->flash_id = FLASH_MAN_INTEL; //0x00300000 break; //joelin for MXIC case (uchar)MX_MANUFACT: // 0x00c2 - printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__); info->flash_id = FLASH_MAN_MX ;//0x00030000 break; default: - printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__); info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; info->size = 0; @@ -489,11 +481,9 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) break;*/ } - printf("%s:%s[%d] %08lx\n", __FILE__, __func__, __LINE__, addr[0]); /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */ if (info->flash_id != FLASH_UNKNOWN) switch (addr[0]) { case (FPW)EON_ID_EN29LV320B: - printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__); info->flash_id += FLASH_29LV320B; info->sector_count = 71; info->size = 0x00400000 * (sizeof(FPW)/2); diff --git a/package/uboot-ifxmips/patches/130-a800.patch b/package/uboot-ifxmips/patches/130-a800.patch new file mode 100644 index 000000000..3e19e6c27 --- /dev/null +++ b/package/uboot-ifxmips/patches/130-a800.patch @@ -0,0 +1,33 @@ +Index: u-boot-1.1.5/drivers/ifx_sw.c +=================================================================== +--- u-boot-1.1.5.orig/drivers/ifx_sw.c 2010-03-24 19:21:19.000000000 +0100 ++++ u-boot-1.1.5/drivers/ifx_sw.c 2010-03-24 19:23:09.000000000 +0100 +@@ -118,7 +118,7 @@ + { + struct eth_device *dev; + unsigned short chipid; +- ++ int i; + #if 0 + printf("Entered danube_switch_initialize()\n"); + #endif +@@ -130,6 +130,19 @@ + } + memset(dev, 0, sizeof(*dev)); + ++#ifdef A800_SWITCH ++ printf ("bring up a800 switch and leds\n"); ++ *EBU_CON_1 = 0x1e7ff; ++ *EBU_ADDR_SEL_1 = 0x14000001; ++ ++ *((volatile u16*)0xb4000000) = 0x0; ++ for(i = 0; i < 1000; i++) ++ udelay(1000); ++ *((volatile u16*)0xb4000000) = (1 << 10); ++ *EBU_CON_1 = 0x8001e7ff; ++#define CLK_OUT2_25MHZ ++#endif ++ + danube_dma_init(); + danube_init_switch_chip(REV_MII_MODE); + |