summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh3
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom1
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/01_leds3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/02_network6
-rw-r--r--target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming43
-rw-r--r--target/linux/ramips/base-files/lib/preinit/06_set_iface_mac1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/WNCE2001.dts142
-rw-r--r--target/linux/ramips/image/Makefile13
-rw-r--r--tools/firmware-utils/src/mkdapimg.c39
11 files changed, 251 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 866003c28..fe925c0f0 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -111,6 +111,9 @@ get_status_led() {
wr512-3gn)
status_led="wr512:green:wps"
;;
+ wnce2001)
+ status_led="netgear:green:power"
+ ;;
mzk-w300nh2)
status_led="mzkw300nh2:green:power"
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index b6490b5b5..5915a02ef 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -93,6 +93,7 @@ case "$FIRMWARE" in
wl-330n3g | \
wl-351 | \
wli-tx4-ag300n | \
+ wnce2001 | \
wr512-3gn | \
wr6202 | \
mzk-w300nh2 | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index bb8a5dcbd..cd17d7fa3 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -112,6 +112,9 @@ case $board in
wcr-150gn)
set_usb_led "wcr150gn:amber:user"
;;
+ wnce2001)
+ set_wifi_led "netgear:green:wlan"
+ ;;
esac
ucidef_commit_leds
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 9c1936e57..e28f2b546 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -41,7 +41,8 @@ ramips_setup_interfaces()
w150m | \
all0256n | \
all5002 | \
- broadway)
+ broadway | \
+ wnce2001)
ucidef_add_switch "switch0" "1" "0"
ucidef_set_interface_lan "eth0"
;;
@@ -242,7 +243,8 @@ ramips_setup_macs()
all0239-3g | \
carambola | \
- w502u)
+ w502u | \
+ wnce2001)
lan_mac=$(mtd_get_mac_binary factory 40)
wan_mac=$(mtd_get_mac_binary factory 46)
;;
diff --git a/target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming b/target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
new file mode 100644
index 000000000..67a1746f1
--- /dev/null
+++ b/target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
@@ -0,0 +1,43 @@
+#!/bin/sh
+
+# Netgear WNCE2001 has does a checksum check on boot and goes into recovery
+# tftp mode when the check fails. Initializing the JFFS2 partition triggers
+# this, so we make sure to zero checksum and size to be checksummed before
+# that happens, so this needs to run very early during boot.
+
+do_wnce2001_checksumming_disable() {
+ . /lib/ramips.sh
+
+ local board=$(ramips_board_name)
+
+ case "$board" in
+ wnce2001)
+ echo "Board is WNCE2001, updating checksum partition..."
+ local zeroes=/dev/zero
+ local tmpfile=/tmp/wnce2001_checksum
+ local partname=checksum
+ local mtd=$(find_mtd_part $partname)
+ dd if=$mtd of=$tmpfile bs=80 count=1 2>/dev/null
+ signature=$(dd if=$tmpfile bs=1 skip=24 count=20 2>/dev/null)
+ checksum=$(dd if=$tmpfile bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
+ if [ "$signature" != "RT3052-AP-WNCE2001-3" ]; then
+ echo "Signature of checksum partition is wrong, bailing."
+ return 0
+ fi
+ if [ "$checksum" != "00000000" ]; then
+ echo "Checksum is set, zeroing."
+ # zero out checksum
+ dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=0 count=4 2>/dev/null
+ # zero out bytecount to be checksummed
+ dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=60 count=4 2>/dev/null
+ mtd write $tmpfile $partname
+ else
+ echo "Checksum is already zero, nothing to do."
+ fi
+ ;;
+ esac
+
+ return 0
+}
+
+boot_hook_add preinit_main do_wnce2001_checksumming_disable
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 7824e2b25..52bf115cc 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -64,6 +64,7 @@ preinit_set_mac_address() {
w306r-v20 |\
w502u |\
wr6202 |\
+ wnce2001 |\
xdxrn502j)
mac=$(mtd_get_mac_binary factory 40)
ifconfig eth0 hw ether $mac 2>/dev/null
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index c89dd469a..37b477a06 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -120,6 +120,9 @@ ramips_board_detect() {
*"NBG-419N")
name="nbg-419n"
;;
+ *"Netgear WNCE2001")
+ name="wnce2001"
+ ;;
*"NexAira BC2")
name="bc2"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 34d2c54c8..ef150445b 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -59,6 +59,7 @@ platform_check_image() {
wl341v3 | \
wl-330n | \
wl-351 | \
+ wnce2001 | \
wli-tx4-ag300n | \
whr-g300n |\
ur-326n4g |\
diff --git a/target/linux/ramips/dts/WNCE2001.dts b/target/linux/ramips/dts/WNCE2001.dts
new file mode 100644
index 000000000..1aa1e2cc0
--- /dev/null
+++ b/target/linux/ramips/dts/WNCE2001.dts
@@ -0,0 +1,142 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "WNCE2001", "ralink,rt3052-soc";
+ model = "Netgear WNCE2001";
+
+ memorydetect {
+ ralink,memory = <0x0 0x200000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus@10000000 {
+ sysc@0 {
+ ralink,pinmux = "spi", "uartlite", "jtag", "sdram";
+ ralink,gpiomux = "i2c", "mdio", "rgmii";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l3205d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l3205d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "config";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "language";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "pot";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "checksum";
+ reg = <0xa0000 0x10000>;
+ };
+
+ partition@b0000 {
+ label = "firmware";
+ reg = <0xb0000 0x350000>;
+ };
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ status = "okay";
+ };
+
+ esw@10110000 {
+ status = "okay";
+ };
+
+ wmac@10180000 {
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power-green {
+ label = "netgear:green:power";
+ gpios = <&gpio0 8 1>;
+ };
+ power-red {
+ label = "netgear:red:power";
+ gpios = <&gpio0 9 1>;
+ };
+ wlan-green {
+ label = "netgear:green:wlan";
+ gpios = <&gpio0 12 0>;
+ };
+ wlan-red {
+ label = "netgear:red:wlan";
+ gpios = <&gpio0 13 0>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x211>;
+ };
+ rt {
+ label = "rt";
+ gpios = <&gpio0 11 1>;
+ linux,code = <0x100>;
+ };
+ ap {
+ label = "ap";
+ gpios = <&gpio0 7 1>;
+ linux,code = <0x101>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 0002eb497..eaa1fcfb9 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -392,6 +392,18 @@ Image/Build/Profile/WL341V3=$(call BuildFirmware/WL341V3/$(1),$(1))
Image/Build/Profile/WL-351=$(call BuildFirmware/Default4M/$(1),$(1),wl-351,WL-351)
+define BuildFirmware/WNCE2001/squashfs
+ $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
+ -mkdapimg -s RT3052-AP-WNCE2001-3 -r WW -v 1.0.0.99 \
+ -i $(call sysupname,$(1),$(2)) \
+ -o $(call imgname,$(1),$(2))-factory-worldwide.bin
+ -mkdapimg -s RT3052-AP-WNCE2001-3 -r NA -v 1.0.0.99 \
+ -i $(call sysupname,$(1),$(2)) \
+ -o $(call imgname,$(1),$(2))-factory-northamerica.bin
+endef
+BuildFirmware/WNCE2001/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+Image/Build/Profile/WNCE2001=$(call BuildFirmware/WNCE2001/$(1),$(1),wnce2001,WNCE2001)
+
Image/Build/Profile/WR512-3GN=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN)
Image/Build/Profile/UR-326N4G=$(call BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G)
@@ -451,6 +463,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WL_330N3G,$(1))
$(call Image/Build/Profile/WL341V3,$(1))
$(call Image/Build/Profile/WL-351,$(1))
+ $(call Image/Build/Profile/WNCE2001,$(1))
$(call Image/Build/Profile/WR512-3GN,$(1))
$(call Image/Build/Profile/WR6202,$(1))
$(call Image/Build/Profile/XDXRN502J,$(1))
diff --git a/tools/firmware-utils/src/mkdapimg.c b/tools/firmware-utils/src/mkdapimg.c
index 8b0359f74..ed662d8ec 100644
--- a/tools/firmware-utils/src/mkdapimg.c
+++ b/tools/firmware-utils/src/mkdapimg.c
@@ -27,6 +27,8 @@
#define MAX_MODEL_NAME_LEN 20
#define MAX_SIG_LEN 30
+#define MAX_REGION_LEN 4
+#define MAX_VERSION_LEN 12
struct img_hdr_struct {
uint32_t checksum;
@@ -51,7 +53,7 @@ perrexit(int code, char *msg)
void
usage()
{
- fprintf(stderr, "usage: %s [-p] [-m model] -s signature -i input -o output\n", progname);
+ fprintf(stderr, "usage: %s [-p] [-m model] [-r region] [-v version] -s signature -i input -o output\n", progname);
exit(1);
}
@@ -60,8 +62,11 @@ main(int ac, char *av[])
{
char model[MAX_MODEL_NAME_LEN+1];
char signature[MAX_SIG_LEN+1];
+ char region[MAX_REGION_LEN+1];
+ char version[MAX_VERSION_LEN+1];
int patchmode = 0;
int fixmode = 0;
+ int have_regionversion = 0;
FILE *ifile, *ofile;
int c;
@@ -71,11 +76,13 @@ main(int ac, char *av[])
progname = basename(av[0]);
memset(model, 0, sizeof(model));
memset(signature, 0, sizeof(signature));
+ memset(region, 0, sizeof(region));
+ memset(version, 0, sizeof(version));
while ( 1 ) {
int c;
- c = getopt(ac, av, "pxm:s:i:o:");
+ c = getopt(ac, av, "pxm:r:v:s:i:o:");
if (c == -1)
break;
@@ -94,6 +101,24 @@ main(int ac, char *av[])
}
strcpy(model, optarg);
break;
+ case 'r':
+ if (strlen(optarg) > MAX_REGION_LEN) {
+ fprintf(stderr, "%s: region exceeds %d chars\n",
+ progname, MAX_REGION_LEN);
+ exit(1);
+ }
+ have_regionversion = 1;
+ strcpy(region, optarg);
+ break;
+ case 'v':
+ if (strlen(optarg) > MAX_VERSION_LEN) {
+ fprintf(stderr, "%s: version exceeds %d chars\n",
+ progname, MAX_VERSION_LEN);
+ exit(1);
+ }
+ have_regionversion = 1;
+ strcpy(version, optarg);
+ break;
case 's':
if (strlen(optarg) > MAX_SIG_LEN) {
fprintf(stderr, "%s: signature exceeds %d chars\n",
@@ -150,6 +175,10 @@ main(int ac, char *av[])
imghdr.checksum = htonl(cksum);
imghdr.partition = 0 ; // don't care?
imghdr.hdr_len = sizeof(imghdr);
+ if (have_regionversion) {
+ imghdr.hdr_len += MAX_REGION_LEN;
+ imghdr.hdr_len += MAX_VERSION_LEN;
+ }
imghdr.flash_byte_cnt = htonl(bcnt);
} else {
if (ntohl(imghdr.checksum) != cksum) {
@@ -176,6 +205,12 @@ main(int ac, char *av[])
if (fwrite(&imghdr, sizeof(imghdr), 1, ofile) < 0)
perrexit(2, "fwrite header on output");
+ if (have_regionversion) {
+ if (fwrite(&region, MAX_REGION_LEN, 1, ofile) < 0)
+ perrexit(2, "fwrite header on output");
+ if (fwrite(&version, MAX_VERSION_LEN, 1, ofile) < 0)
+ perrexit(2, "fwrite header on output");
+ }
while ((c = fgetc(ifile)) != EOF) {
if (fputc(c, ofile) == EOF)