diff options
-rw-r--r-- | package/mac80211/Config.in | 87 | ||||
-rw-r--r-- | package/mac80211/Config.in.ath9k | 12 | ||||
-rw-r--r-- | package/mac80211/Config.in.b43 | 81 | ||||
-rw-r--r-- | package/mac80211/Makefile | 18 |
4 files changed, 115 insertions, 83 deletions
diff --git a/package/mac80211/Config.in b/package/mac80211/Config.in index d3e015a25..35f01c8a8 100644 --- a/package/mac80211/Config.in +++ b/package/mac80211/Config.in @@ -1,81 +1,10 @@ # mac80211 configuration -choice - prompt "b43 firmware version" - depends on PACKAGE_kmod-b43 - default B43_STABLE - help - This option allows you to select the version of the b43 firmware. - -config B43_STABLE - bool "4.150.10.5 (stable)" - help - Stable firmware for BCM43xx devices. - - If unsure, select this. - -config B43_EXPERIMENTAL - bool "4.178.10.4 (experimental)" - help - Experimental firmware for BCM43xx devices. - - This firmware is not tested as much as the "stable" firmware. - - If unsure, select the "stable" firmware. - -config B43_OPENFIRMWARE - bool "Open FirmWare for WiFi networks" - help - Opensource firmware for BCM43xx devices. - - Do _not_ select this, unless you know what you are doing. - The Opensource firmware is not suitable for embedded devices, yet. - It does not support QoS, which is bad for AccessPoints. - It does not support hardware crypto acceleration, which is a showstopper - for embedded devices with low CPU resources. - - If unsure, select the "stable" firmware. - -endchoice - -config B43_FW_SQUASH - bool "Remove unnecessary firmware files" - depends on PACKAGE_kmod-b43 && !B43_OPENFIRMWARE - help - This options allows you to remove unnecessary b43 firmware files - from the final rootfs image. This can reduce the rootfs size by - up to 200k. - - Do _NOT_ use this option, if you don't know the core revision - and/or PHY type of your wireless chip. - - If unsure, say N. - -config B43_FW_SQUASH_COREREVS - string "Core revisions to include" - depends on PACKAGE_kmod-b43 && B43_FW_SQUASH - default "5,6,7,8,9,10" - help - This is a comma seperated list of core revision numbers. - Example (keep files for rev5 only): - 5 - Example (keep files for rev5 and rev11): - 5,11 - -config B43_FW_SQUASH_PHYTYPES - string "PHY types to include" - depends on PACKAGE_kmod-b43 && B43_FW_SQUASH - default "G,LP,N" - help - This is a comma seperated list of PHY types: - A => A-PHY - AG => Dual A-PHY G-PHY - G => G-PHY - LP => LP-PHY - N => N-PHY - - Example (keep files for G-PHY only): - G - Example (keep files for G-PHY and N-PHY): - G,N - +config PACKAGE_MAC80211_DEBUGFS + bool "Export mac80211 internals in DebugFS" + depends on PACKAGE_kmod-mac80211 + ---help--- + Select this to see extensive information about + the internal state of mac80211 in debugfs. + + Say N unless you know you need this. diff --git a/package/mac80211/Config.in.ath9k b/package/mac80211/Config.in.ath9k new file mode 100644 index 000000000..91e5984c6 --- /dev/null +++ b/package/mac80211/Config.in.ath9k @@ -0,0 +1,12 @@ +# mac80211 configuration + +config PACKAGE_ATH9K_DEBUG + bool "ath9k debugging" + depends PACKAGE_kmod-ath9k && KERNEL_DEBUG_FS + ---help--- + Say Y, if you need ath9k to display debug messages. + Pass the debug mask as a module parameter: + + modprobe ath9k debug=0x00002000 + + Look in ath9k/core.h for possible debug masks diff --git a/package/mac80211/Config.in.b43 b/package/mac80211/Config.in.b43 new file mode 100644 index 000000000..f5399312c --- /dev/null +++ b/package/mac80211/Config.in.b43 @@ -0,0 +1,81 @@ +# B43 configuration + +choice + prompt "b43 firmware version" + depends on PACKAGE_kmod-b43 + default B43_STABLE + help + This option allows you to select the version of the b43 firmware. + +config B43_STABLE + bool "4.150.10.5 (stable)" + help + Stable firmware for BCM43xx devices. + + If unsure, select this. + +config B43_EXPERIMENTAL + bool "4.178.10.4 (experimental)" + help + Experimental firmware for BCM43xx devices. + + This firmware is not tested as much as the "stable" firmware. + + If unsure, select the "stable" firmware. + +config B43_OPENFIRMWARE + bool "Open FirmWare for WiFi networks" + help + Opensource firmware for BCM43xx devices. + + Do _not_ select this, unless you know what you are doing. + The Opensource firmware is not suitable for embedded devices, yet. + It does not support QoS, which is bad for AccessPoints. + It does not support hardware crypto acceleration, which is a showstopper + for embedded devices with low CPU resources. + + If unsure, select the "stable" firmware. + +endchoice + +config B43_FW_SQUASH + bool "Remove unnecessary firmware files" + depends on PACKAGE_kmod-b43 && !B43_OPENFIRMWARE + help + This options allows you to remove unnecessary b43 firmware files + from the final rootfs image. This can reduce the rootfs size by + up to 200k. + + Do _NOT_ use this option, if you don't know the core revision + and/or PHY type of your wireless chip. + + If unsure, say N. + +config B43_FW_SQUASH_COREREVS + string "Core revisions to include" + depends on PACKAGE_kmod-b43 && B43_FW_SQUASH + default "5,6,7,8,9,10" + help + This is a comma seperated list of core revision numbers. + Example (keep files for rev5 only): + 5 + Example (keep files for rev5 and rev11): + 5,11 + +config B43_FW_SQUASH_PHYTYPES + string "PHY types to include" + depends on PACKAGE_kmod-b43 && B43_FW_SQUASH + default "G,LP,N" + help + This is a comma seperated list of PHY types: + A => A-PHY + AG => Dual A-PHY G-PHY + G => G-PHY + LP => LP-PHY + N => N-PHY + + Example (keep files for G-PHY only): + G + Example (keep files for G-PHY and N-PHY): + G,N + diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index 98bb6c23f..719863be2 100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -11,7 +11,7 @@ include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=mac80211 PKG_VERSION:=2009-08-20 -PKG_RELEASE:=1 +PKG_RELEASE:=2 PKG_SOURCE_URL:= \ http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/08 \ http://wireless.kernel.org/download/compat-wireless-2.6 @@ -43,6 +43,10 @@ define KernelPackage/mac80211 AUTOLOAD:=$(call AutoLoad,20,cfg80211 mac80211) endef +define KernelPackage/mac80211/config + source "$(SOURCE)/Config.in" +endef + define KernelPackage/mac80211/description Linux 802.11 Wireless Networking Stack endef @@ -298,6 +302,10 @@ This module adds support for wireless adapters based on Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets. endef +define KernelPackage/ath9k/config + source "$(SOURCE)/Config.in.ath9k" +endef + define KernelPackage/mac80211-hwsim $(call KernelPackage/mac80211/Default) TITLE:=mac80211 HW simulation device @@ -396,7 +404,7 @@ $(call KernelPackage/b43-common) endef define KernelPackage/b43/config - source "$(SOURCE)/Config.in" + source "$(SOURCE)/Config.in.b43" endef define KernelPackage/b43/description @@ -422,7 +430,8 @@ BUILDFLAGS:= \ $(if $(CONFIG_PCI),-DCONFIG_SSB_SPROM) \ $(if $(CONFIG_LEDS_TRIGGERS), -DCONFIG_MAC80211_LEDS -DCONFIG_LEDS_TRIGGERS -DCONFIG_B43_LEDS -DCONFIG_B43LEGACY_LEDS) \ $(if $(CONFIG_HW_RANDOM),-DCONFIG_B43_HWRNG -DCONFIG_B43LEGACY_HWRNG) \ - $(if $(CONFIG_DEBUG_FS), -DCONFIG_MAC80211_DEBUGFS) \ + $(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),-DCONFIG_MAC80211_DEBUGFS) \ + $(if $(CONFIG_PACKAGE_ATH9K_DEBUG),-DCONFIG_ATH9K_DEBUG) \ -D__CONFIG_MAC80211_RC_DEFAULT=minstrel \ MAKE_OPTS:= \ @@ -433,7 +442,7 @@ MAKE_OPTS:= \ CONFIG_MAC80211_RC_PID=y \ CONFIG_MAC80211_RC_MINSTREL=y \ CONFIG_MAC80211_LEDS=$(CONFIG_LEDS_TRIGGERS) \ - CONFIG_MAC80211_DEBUGFS=$(CONFIG_DEBUG_FS) \ + CONFIG_MAC80211_DEBUGFS=$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),y) \ CONFIG_B43_PCMCIA=n CONFIG_B43_PIO=n \ CONFIG_B43_PCI_AUTOSELECT=$(if $(CONFIG_PCI),y) \ CONFIG_B43_PCICORE_AUTOSELECT=$(if $(CONFIG_PCI),y) \ @@ -450,6 +459,7 @@ MAKE_OPTS:= \ CONFIG_ATH_COMMON=$(if $(CONFIG_PACKAGE_kmod-ath),m) \ CONFIG_ATH5K=$(if $(CONFIG_PACKAGE_kmod-ath5k),m) \ CONFIG_ATH9K=$(if $(CONFIG_PACKAGE_kmod-ath9k),m) \ + CONFIG_ATH9K_DEBUG=$(if $(CONFIG_PACKAGE_ATH9K_DEBUG),y) \ CONFIG_ZD1211RW=$(if $(CONFIG_PACKAGE_kmod-zd1211rw),m) \ CONFIG_P54_COMMON=$(if $(CONFIG_PACKAGE_kmod-p54-common),m) \ CONFIG_P54_PCI=$(if $(CONFIG_PACKAGE_kmod-p54-pci),m) \ |