diff options
4 files changed, 16 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 43fda2f17..78c9e945b 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -82,7 +82,7 @@ get_status_led() { status_led="v22rw-2x2:green:security" ;; w306r-v20) - status_led="w306r:green:sys" + status_led="w306r-v20:green:sys" ;; w502u) status_led="alfa:blue:wps" diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index c987a2567..43d572692 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -59,7 +59,6 @@ ramips_setup_interfaces() ;; freestation5 | \ - w306r-v20 | \ wcr-150gn) ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1" ;; diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c index 6235a7329..7c8eb867c 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c @@ -20,7 +20,7 @@ #include "devices.h" -#define W306R_V20_GPIO_LED_SYS 9 /* FIXME */ +#define W306R_V20_GPIO_LED_SYS 9 #define W306R_V20_GPIO_LED_WPS 13 #define W306R_V20_GPIO_BUTTON_RESET 10 @@ -57,7 +57,7 @@ static void __init w306r_v20_init(void) rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; rt305x_register_ethernet(); ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio), w306r_v20_leds_gpio); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 88b20fa3d..ebbc4b224 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -220,6 +220,18 @@ define BuildFirmware/RTN10PLUS $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size)) endef +define BuildFirmware/W306R_4M + $(call BuildFirmware/w306r,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120) +endef + +define BuildFirmware/w306r + $(call PatchKernelLzma,$(2),$(3)) + mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry)\ + -n 'linkn Kernel Image' \ + -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage + $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(4),$(KDIR)/root.$(1),$(5),$(call imgname,$(1),$(2))-factory.bin) +endef + mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware) define BuildFirmware/WHRG300N $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys) @@ -377,6 +389,7 @@ endef define Image/Build/Profile/W306R_V20 $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys) + $(call Image/Build/Template/$(fs_squash)/$(1),W306R_4M,w306r-v20,W306R_V20,ttyS1,57600,phys) endef define Image/Build/Profile/W502U |