ramips: use kernel 3.6.6

## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34111 3c298f89-4303-0410-b956-a3cf2f4a3e73

0 files changed, 0 insertions, 0 deletions