summaryrefslogtreecommitdiffstats
path: root/toolchain/insight
diff options
context:
space:
mode:
authorblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>2013-04-09 14:19:33 +0000
committerblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>2013-04-09 14:19:33 +0000
commitcb06f20d31cc8776aab0de950b89b77f50eef890 (patch)
tree40279112e9941bcace56f3f7dc6a4fdeb7e5b703 /toolchain/insight
parentb945e78bc3eb53374715a44c0c4b49826d0a8c71 (diff)
[ramips] Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36289 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'toolchain/insight')
0 files changed, 0 insertions, 0 deletions