[adm5120] refactor kernel code (part 1), mark it as broken now

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7916 3c298f89-4303-0410-b956-a3cf2f4a3e73

57 files changed, 3529 insertions, 1494 deletions

diff --git a/target/linux/adm5120-2.6/Makefile b/target/linux/adm5120-2.6/Makefile
index 4f08a3b2c..fb46f2831 100644
--- a/target/linux/adm5120-2.6/Makefile
+++ b/target/linux/adm5120-2.6/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 ARCH:=mipsel
 BOARD:=adm5120
 BOARDNAME:=ADM5120 (Little Endian)
-FEATURES:=squashfs jffs2 pci usb
+FEATURES:=squashfs jffs2 pci usb broken
 
 LINUX_VERSION:=2.6.22.1
 
diff --git a/target/linux/adm5120-2.6/config/default b/target/linux/adm5120-2.6/config/default
index f22330490..70d218d23 100644
--- a/target/linux/adm5120-2.6/config/default
+++ b/target/linux/adm5120-2.6/config/default
@@ -1,7 +1,7 @@
 CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_ADM5120_HARDWARE_SWAB=y
+# CONFIG_ADM5120_HARDWARE_SWAB is not set
 CONFIG_ADM5120_NR_UARTS=2
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -52,6 +52,7 @@ CONFIG_DEVPORT=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
 CONFIG_ELF_CORE=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -154,7 +155,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -184,6 +185,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_SPLIT_ROOTFS is not set
 # CONFIG_NETDEV_1000 is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_PCI is not set
@@ -230,6 +232,7 @@ CONFIG_SOFT_WATCHDOG=m
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
@@ -243,7 +246,7 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_USB=y
 # CONFIG_USBPCWATCHDOG is not set
 # CONFIG_USB_ACM is not set
-CONFIG_USB_ADM5120_HCD=y
+CONFIG_USB_ADM5120_HCD=m
 # CONFIG_USB_ALI_M5632 is not set
 # CONFIG_USB_AN2720 is not set
 # CONFIG_USB_CATC is not set
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile b/target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile
index deb1adf7e..fd588a4e3 100644
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile
@@ -5,5 +5,9 @@
 obj-y	:= setup.o prom.o irq.o memory.o adm5120_info.o
 obj-y	+= gpio.o
 obj-y	+= time.o
+obj-y	+= reset.o
+obj-y	+= board.o
+obj-y	+= platform.o
+obj-y	+= trxsplit.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c
index c34dbd009..17d82faaf 100644
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c
@@ -1,904 +1,42 @@
 /*
- * $Id$
+ *  $Id$
  *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/types.h>
-#include <linux/autoconf.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/string.h>
-#include <linux/module.h>
 
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
-#include <asm/byteorder.h>
 
+#include <asm/mach-adm5120/adm5120_info.h>
 #include <asm/mach-adm5120/adm5120_defs.h>
 #include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_mpmc.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/myloader.h>
-#include <asm/mach-adm5120/routerboot.h>
-#include <asm/mach-adm5120/zynos.h>
-
-extern char *prom_getenv(char *envname);
-/*
- * Globals
- */
-struct adm5120_board adm5120_board;
-EXPORT_SYMBOL_GPL(adm5120_board);
-
-unsigned int adm5120_boot_loader;
 
 unsigned int adm5120_product_code;
 unsigned int adm5120_revision;
 unsigned int adm5120_package;
 unsigned int adm5120_nand_boot;
 unsigned long adm5120_speed;
-unsigned long adm5120_memsize;
-
-/*
- * Locals
- */
-static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
-	[BOOT_LOADER_UNKNOWN]	= "Unknown",
-	[BOOT_LOADER_CFE]	= "CFE",
-	[BOOT_LOADER_UBOOT]	= "U-Boot",
-	[BOOT_LOADER_MYLOADER]	= "MyLoader",
-	[BOOT_LOADER_ROUTERBOOT]= "RouterBOOT",
-	[BOOT_LOADER_BOOTBASE]	= "Bootbase"
-};
-
-static struct adm5120_board __initdata adm5120_boards[] = {
-	/* FIXME: some boards have invalid fields */
-	{
-		.name		= "Cellvision CAS-630/630W",
-		.mach_type	= MACH_ADM5120_CAS630,
-		.has_usb	= 0,
-		.iface_num	= 1,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Cellvision CAS-670/670W",
-		.mach_type	= MACH_ADM5120_CAS670,
-		.has_usb	= 0,
-		.iface_num	= 1,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Cellvision CAS-700/700W",
-		.mach_type	= MACH_ADM5120_CAS700,
-		.has_usb	= 0,
-		.iface_num	= 1,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Cellvision CAS-771/771W",
-		.mach_type	= MACH_ADM5120_CAS771,
-		.has_usb	= 0,
-		.iface_num	= 5,
-		.mem_size	= (32 << 20),
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Cellvision CAS-790",
-		.mach_type	= MACH_ADM5120_CAS790,
-		.has_usb	= 0,
-		.iface_num	= 1,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Cellvision CAS-861/861W",
-		.mach_type	= MACH_ADM5120_CAS861,
-		.has_usb	= 0,
-		.iface_num	= 1,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Cellvision NFS-101U/101WU",
-		.mach_type	= MACH_ADM5120_NFS101U,
-		.has_usb	= 0,
-		.iface_num	= 1,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Cellvision NFS-202U/202WU",
-		.mach_type	= MACH_ADM5120_NFS202U,
-		.has_usb	= 0,
-		.iface_num	= 1,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Compex NetPassage 27G",
-		.mach_type	= MACH_ADM5120_NP27G,
-		.has_usb	= 1,
-		.iface_num	= 5,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Compex NetPassage 28G",
-		.mach_type	= MACH_ADM5120_NP28G,
-		.has_usb	= 0,
-		.iface_num	= 4,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Compex NP28G (HotSpot)",
-		.mach_type	= MACH_ADM5120_NP28GHS,
-		.has_usb	= 0,
-		.iface_num	= 4,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Compex WP54AG",
-		.mach_type	= MACH_ADM5120_WP54AG,
-		.has_usb	= 0,
-		.iface_num	= 2,
-		.mem_size	= (16 << 20),
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Compex WP54G",
-		.mach_type	= MACH_ADM5120_WP54G,
-		.has_usb	= 0,
-		.iface_num	= 2,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Compex WP54G-WRT",
-		.mach_type	= MACH_ADM5120_WP54G_WRT,
-		.has_usb	= 0,
-		.iface_num	= 2,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Compex WP54G v1C",
-		.mach_type	= MACH_ADM5120_WP54Gv1C,
-		.has_usb	= 0,
-		.iface_num	= 2,
-		.flash0_size	= 2*1024*1024,
-	},
-	{
-		.name		= "Compex WPP54AG",
-		.mach_type	= MACH_ADM5120_WPP54AG,
-		.has_usb	= 0,
-		.iface_num	= 2,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Compex WPP54G",
-		.mach_type	= MACH_ADM5120_WPP54G,
-		.has_usb	= 0,
-		.iface_num	= 2,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Edimax BR-6104K",
-		.mach_type	= MACH_ADM5120_BR6104K,
-		.has_usb	= 0,
-		.iface_num	= 5,
-		.mem_size	= (16 << 20),
-		.flash0_size	= 2*1024*1024,
-	},
-	{
-		.name		= "Infineon EASY 5120",
-		.mach_type	= MACH_ADM5120_EASY5120,
-		.has_usb	= 0,
-		.iface_num	= 0,
-		.flash0_size	= 2*1024*1024,
-	},
-	{
-		.name		= "Infineon EASY 5120-RT",
-		.mach_type	= MACH_ADM5120_EASY5120RT,
-		.has_usb	= 0,
-		.iface_num	= 0,
-		.flash0_size	= 2*1024*1024,
-	},
-	{
-		.name		= "Infineon EASY 5120P-ATA",
-		.mach_type	= MACH_ADM5120_EASY5120PATA,
-		.has_usb	= 0,
-		.iface_num	= 0,
-		.flash0_size	= 2*1024*1024,
-	},
-	{
-		.name		= "Infineon EASY 83000",
-		.mach_type	= MACH_ADM5120_EASY83000,
-		.has_usb	= 0,
-		.iface_num	= 6,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "RouterBOARD 111",
-		.mach_type	= MACH_ADM5120_RB_111,
-		.has_usb	= 0,
-		.iface_num	= 1,
-		.flash0_size	= 128*1024,
-	},
-	{
-		.name		= "RouterBOARD 112",
-		.mach_type	= MACH_ADM5120_RB_112,
-		.has_usb	= 0,
-		.iface_num	= 1,
-		.flash0_size	= 128*1024,
-	},
-	{
-		.name		= "RouterBOARD 133",
-		.mach_type	= MACH_ADM5120_RB_133,
-		.has_usb	= 0,
-		.iface_num	= 3,
-		.flash0_size	= 128*1024,
-	},
-	{
-		.name		= "RouterBOARD 133C",
-		.mach_type	= MACH_ADM5120_RB_133C,
-		.has_usb	= 0,
-		.iface_num	= 1,
-		.flash0_size	= 128*1024,
-	},
-	{
-		.name		= "RouterBOARD 150",
-		.mach_type	= MACH_ADM5120_RB_150,
-		.has_usb	= 0,
-		.iface_num	= 5,
-		.flash0_size	= 128*1024,
-	},
-	{
-		.name		= "RouterBOARD 153",
-		.mach_type	= MACH_ADM5120_RB_153,
-		.has_usb	= 0,
-		.iface_num	= 5,
-		.flash0_size	= 128*1024,
-	},
-	{
-		.name		= "ZyXEL ES-2024A",
-		.mach_type	= MACH_ADM5120_ES2024A,
-		.has_usb	= 0,
-		.iface_num	= 0,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL ES-2024PWR",
-		.mach_type	= MACH_ADM5120_ES2024PWR,
-		.has_usb	= 0,
-		.iface_num	= 0,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL ES-2108",
-		.mach_type	= MACH_ADM5120_ES2108,
-		.has_usb	= 0,
-		.iface_num	= 0,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL ES-2108-F",
-		.mach_type	= MACH_ADM5120_ES2108F,
-		.has_usb	= 0,
-		.iface_num	= 0,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL ES-2108-G",
-		.mach_type	= MACH_ADM5120_ES2108G,
-		.has_usb	= 0,
-		.iface_num	= 0,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL ES-2108-LC",
-		.mach_type	= MACH_ADM5120_ES2108LC,
-		.has_usb	= 0,
-		.iface_num	= 0,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL ES-2108-PWR",
-		.mach_type	= MACH_ADM5120_ES2108PWR,
-		.has_usb	= 0,
-		.iface_num	= 0,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL HomeSafe 100/100W",
-		.mach_type	= MACH_ADM5120_HS100,
-		.has_usb	= 0,
-		.iface_num	= 5,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL Prestige 334",
-		.mach_type	= MACH_ADM5120_P334,
-		.has_usb	= 0,
-		.iface_num	= 5,
-		.flash0_size	= 2*1024*1024,
-	},
-	{
-		.name		= "ZyXEL Prestige 334U",
-		.mach_type	= MACH_ADM5120_P334U,
-		.has_usb	= 0,
-		.iface_num	= 5,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL Prestige 334W",
-		.mach_type	= MACH_ADM5120_P334W,
-		.has_usb	= 0,
-		.iface_num	= 5,
-		.flash0_size	= 2*1024*1024,
-	},
-	{
-		.name		= "ZyXEL Prestige 334WH",
-		.mach_type	= MACH_ADM5120_P334WH,
-		.has_usb	= 0,
-		.iface_num	= 5,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL Prestige 334WHD",
-		.mach_type	= MACH_ADM5120_P334WHD,
-		.has_usb	= 0,
-		.iface_num	= 5,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL Prestige 334WT",
-		.mach_type	= MACH_ADM5120_P334WT,
-		.has_usb	= 1,
-		.iface_num	= 5,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL Prestige 335/335WT",
-		.mach_type	= MACH_ADM5120_P335,
-		.has_usb	= 1,
-		.iface_num	= 5,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL Prestige 335Plus",
-		.mach_type	= MACH_ADM5120_P335PLUS,
-		.has_usb	= 1,
-		.iface_num	= 5,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "ZyXEL Prestige 335U",
-		.mach_type	= MACH_ADM5120_P335U,
-		.has_usb	= 1,
-		.iface_num	= 5,
-		.flash0_size	= 4*1024*1024,
-	},
-	{
-		.name		= "Unknown ADM5120 board",
-		.mach_type	= MACH_ADM5120_UNKNOWN,
-		.has_usb	= 1,
-		.iface_num	= 5,
-		.flash0_size	= 4*1024*1024,
-	}
-};
-
-#define DUMMY_BOARD()	{.mach_type = MACH_ADM5120_UNKNOWN}
-
-struct mylo_board {
-	u16	vid;
-	u16	did;
-	u16	svid;
-	u16	sdid;
-	unsigned long	mach_type;
-};
-
-
-#define MYLO_BOARD(v,d,sv,sd,mt) { .vid = (v), .did = (d), .svid = (sv), \
-	.sdid = (sd), .mach_type = (mt) }
-
-#define COMPEX_BOARD(d,mt) MYLO_BOARD(VENID_COMPEX,(d),VENID_COMPEX,(d),(mt))
-
-static struct mylo_board mylo_boards[] __initdata = {
-	COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
-	COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
-	COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
-	COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54G),
-	COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
-	COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54AG),
-	COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WPP54G),
-	COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WPP54AG),
-	DUMMY_BOARD()
-};
-
-#define ROUTERBOARD_NAME_LEN	16
-
-struct routerboard {
-	unsigned long	mach_type;
-	char	name[ROUTERBOARD_NAME_LEN];
-};
-
-#define ROUTERBOARD(n, mt) { .name = (n), .mach_type = (mt) }
-static struct routerboard routerboards[] __initdata = {
-	ROUTERBOARD("111", MACH_ADM5120_RB_111),
-	ROUTERBOARD("112", MACH_ADM5120_RB_112),
-	ROUTERBOARD("133", MACH_ADM5120_RB_133),
-	ROUTERBOARD("133C", MACH_ADM5120_RB_133C),
-	ROUTERBOARD("miniROUTER", MACH_ADM5120_RB_150),
-	ROUTERBOARD("153", MACH_ADM5120_RB_150),
-	DUMMY_BOARD()
-};
-
-struct zynos_board {
-	unsigned long	mach_type;
-	unsigned int	vendor_id;
-	u16		board_id;
-};
-
-#define ZYNOS_BOARD(vi, bi, mt) { .vendor_id = (vi), .board_id = (bi), \
-		.mach_type = (mt) }
-
-#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
-#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
-#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
-
-static struct zynos_board zynos_boards[] __initdata = {
-	ZYXEL_BOARD(ZYNOS_BOARD_HS100, MACH_ADM5120_HS100),
-	ZYXEL_BOARD(ZYNOS_BOARD_P334, MACH_ADM5120_P334),
-	ZYXEL_BOARD(ZYNOS_BOARD_P334U, MACH_ADM5120_P334U),
-	ZYXEL_BOARD(ZYNOS_BOARD_P334W, MACH_ADM5120_P334W),
-	ZYXEL_BOARD(ZYNOS_BOARD_P334WH, MACH_ADM5120_P334WH),
-	ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
-	ZYXEL_BOARD(ZYNOS_BOARD_P334WT, MACH_ADM5120_P334WT),
-	ZYXEL_BOARD(ZYNOS_BOARD_P335, MACH_ADM5120_P335),
-	ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
-	ZYXEL_BOARD(ZYNOS_BOARD_P335U, MACH_ADM5120_P335U),
-	DUMMY_BOARD()
-};
-
-struct common_board {
-	char *name;
-	unsigned long	mach_type;
-};
-
-#define DEFBOARD(n, mt) { .name = (n), .mach_type = (mt) }
-static struct common_board common_boards[] __initdata = {
-	DEFBOARD("CAS-630",		MACH_ADM5120_CAS630),
-	DEFBOARD("CAS-670",		MACH_ADM5120_CAS670),
-	DEFBOARD("CAS-700",		MACH_ADM5120_CAS700),
-	DEFBOARD("CAS-771",		MACH_ADM5120_CAS771),
-	DEFBOARD("CAS-790",		MACH_ADM5120_CAS790),
-	DEFBOARD("CAS-861",		MACH_ADM5120_CAS861),
-	DEFBOARD("NFS-101U",		MACH_ADM5120_NFS101U),
-	DEFBOARD("NFS-202U",		MACH_ADM5120_NFS202U),
-	DEFBOARD("EASY 5120",		MACH_ADM5120_EASY5120),
-	DEFBOARD("EASY 5120-RT",	MACH_ADM5120_EASY5120RT),
-	DEFBOARD("EASY 5120P-ATA",	MACH_ADM5120_EASY5120PATA),
-	DEFBOARD("EASY 83000",		MACH_ADM5120_EASY83000),
-	DEFBOARD("BR-6104K",		MACH_ADM5120_BR6104K),
-	DEFBOARD("WP54G-WRT",		MACH_ADM5120_WP54G_WRT),
-	DEFBOARD("P-334WT",		MACH_ADM5120_P334WT),
-	DEFBOARD("P-335",		MACH_ADM5120_P335),
-};
-
-/*
- * Helper routines
- */
-static inline u16 read_le16(void *buf)
-{
-	u8 *p;
-
-	p = buf;
-	return ((u16)p[0] + ((u16)p[1] << 8));
-}
-
-static inline u32 read_le32(void *buf)
-{
-	u8 *p;
-
-	p = buf;
-	return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
-		((u32)p[3] << 24));
-}
-
-static inline u16 read_be16(void *buf)
-{
-	u8 *p;
-
-	p = buf;
-	return (((u16)p[0] << 8) + (u16)p[1]);
-}
-
-static inline u32 read_be32(void *buf)
-{
-	u8 *p;
-
-	p = buf;
-	return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
-		((u32)p[3]));
-}
-
-/*
- * CFE based boards
- */
-#define CFE_EPTSEAL	0x43464531 /* CFE1 is the magic number to recognize CFE
-from other bootloaders */
-
-static int __init cfe_present(void)
-{
-	/*
-	 * This method only works, when we are booted directly from the CFE.
-	 */
-	u32 cfe_handle = (u32) fw_arg0;
-	u32 cfe_a1_val = (u32) fw_arg1;
-	u32 cfe_entry = (u32) fw_arg2;
-	u32 cfe_seal = (u32) fw_arg3;
-
-	/* Check for CFE by finding the CFE magic number */
-	if (cfe_seal != CFE_EPTSEAL) {
-		/* We are not booted from CFE */
-		return 0;
-	}
-
-	/* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
-	if (cfe_a1_val != 0) {
-		return 0;
-	}
-
-	/* The cfe_handle, and the cfe_entry must be kernel mode addresses */
-	if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) {
-		return 0;
-	}
-
-	return 1;
-}
-
-static unsigned long __init cfe_detect_board(void)
-{
-	return MACH_ADM5120_WP54G_WRT;
-}
-
-/*
- * MyLoader based boards
- */
-#define SYS_PARAMS_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
-#define BOARD_PARAMS_ADDR	KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
-#define PART_TABLE_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
-
-static unsigned long __init myloader_detect_board(void)
-{
-	struct mylo_system_params *sysp;
-	struct mylo_board_params *boardp;
-	struct mylo_partition_table *parts;
-	struct mylo_board *board;
-	unsigned long ret;
-
-	ret = MACH_ADM5120_UNKNOWN;
-
-	sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
-	boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
-	parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
-
-	/* Check for some magic numbers */
-	if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
-	   (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
-	   (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
-		goto out;
-
-	for (board = mylo_boards; board->mach_type != MACH_ADM5120_UNKNOWN;
-		board++) {
-		if ((le16_to_cpu(sysp->vid) == board->vid) &&
-			(le16_to_cpu(sysp->did) == board->did) &&
-			(le16_to_cpu(sysp->svid) == board->svid) &&
-			(le16_to_cpu(sysp->sdid) == board->sdid)) {
-			ret = board->mach_type;
-			break;
-		}
-	}
-
-	/* assume MyLoader as the boot-loader */
-	adm5120_boot_loader = BOOT_LOADER_MYLOADER;
-
-out:
-	return ret;
-}
-
-/*
- * RouterBOOT based boards
- */
-static int __init routerboot_load_hs(u8 *buf, u16 buflen,
-	struct rb_hard_settings *hs)
-{
-	u16 id,len;
-	u8 *mac;
-	int i,j;
-
-	if (buflen < 4)
-		return -1;
-
-	if (read_le32(buf) != RB_MAGIC_HARD)
-		return -1;
-
-	/* skip magic value */
-	buf += 4;
-	buflen -= 4;
-
-	while (buflen > 2) {
-		id = read_le16(buf);
-		buf += 2;
-		buflen -= 2;
-		if (id == RB_ID_TERMINATOR || buflen < 2)
-			break;
-
-		len = read_le16(buf);
-		buf += 2;
-		buflen -= 2;
-
-		if (buflen < len)
-			break;
-
-		switch (id) {
-		case RB_ID_BIOS_VERSION:
-			hs->bios_ver = (char *)buf;
-			break;
-		case RB_ID_BOARD_NAME:
-			hs->name = (char *)buf;
-			break;
-		case RB_ID_MEMORY_SIZE:
-			hs->mem_size = read_le32(buf);
-			break;
-		case RB_ID_MAC_ADDRESS_COUNT:
-			hs->mac_count = read_le32(buf);
-			break;
-		case RB_ID_MAC_ADDRESS_PACK:
-			hs->mac_count = len/RB_MAC_SIZE;
-			if (hs->mac_count > RB_MAX_MAC_COUNT)
-				hs->mac_count = RB_MAX_MAC_COUNT;
-			mac = buf;
-			for (i=0; i < hs->mac_count; i++) {
-				for (j=0; j < RB_MAC_SIZE; j++)
-					hs->macs[i][j] = mac[j];
-				mac += RB_MAC_SIZE;
-			}
-			break;
-		}
-
-		buf += len;
-		buflen -= len;
-
-	}
-
-	return 0;
-}
-
-#define RB_BS_OFFS	0x14
-#define RB_OFFS_MAX	(128*1024)
-
-static unsigned long __init routerboot_detect_board(void)
-{
-	struct routerboard *board;
-	struct rb_hard_settings	hs;
-	struct rb_bios_settings	*bs;
-	u8 *base;
-	u32 off,len;
-	unsigned long ret;
-
-	ret = MACH_ADM5120_UNKNOWN;
-
-	base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
-	bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
-
-	off = read_le32(&bs->hs_offs);
-	len = read_le32(&bs->hs_size);
-	if (off > RB_OFFS_MAX)
-		return ret;
-
-	memset(&hs, 0, sizeof(hs));
-	if (routerboot_load_hs(base+off, len, &hs) != 0)
-		return ret;
-
-	/* assume RouterBOOT as the boot-loader */
-	adm5120_boot_loader = BOOT_LOADER_ROUTERBOOT;
-
-	if (hs.name == NULL)
-		return ret;
-
-	for (board = routerboards; board->mach_type != MACH_ADM5120_UNKNOWN;
-		board++) {
-		if (strncmp(board->name, hs.name, strlen(board->name)) == 0) {
-			ret = board->mach_type;
-			break;
-		}
-	}
-
-	return ret;
-}
-
-/*
- * ZyNOS based boards
- */
-static inline u32 zynos_dbgarea_present(u8 *data)
-{
-	u32 t;
-
-	t = read_be32(data+5);
-	if (t != ZYNOS_MAGIC_DBGAREA1)
-		return 0;
-
-	t = read_be32(data+9);
-	if (t != ZYNOS_MAGIC_DBGAREA2)
-		return 0;
-
-	return 1;
-}
-
-#define CHECK_VENDOR(n) (strnicmp(vendor,(n),strlen(n)) == 0)
-
-static inline unsigned int zynos_get_vendor_id(struct zynos_board_info *info)
-{
-	unsigned char vendor[ZYNOS_NAME_LEN];
-	int i;
-
-	for (i=0; i<ZYNOS_NAME_LEN; i++)
-		vendor[i]=info->vendor[i];
-
-	if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
-		return ZYNOS_VENDOR_ID_ZYXEL;
-#if 0
-	/* TODO: there are no known ADM5120 based boards from other vendors */
-	if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
-		return ZYNOS_VENDOR_ID_DLINK;
-
-	if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
-		return ZYNOS_VENDOR_ID_LUCENT;
-
-	if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
-		return ZYNOS_VENDOR_ID_NETGEAR;
-#endif
-
-	return ZYNOS_VENDOR_ID_OTHER;
-}
-
-static inline u16 zynos_get_board_id(struct zynos_board_info *info)
-{
-	return read_be16(&info->board_id);
-}
-
-static inline u32 zynos_get_bootext_addr(struct zynos_board_info *info)
-{
-	return read_be32(&info->bootext_addr);
-}
-
-
-#define ZYNOS_INFO_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
-#define ZYNOS_HDBG_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
-#define BOOTEXT_ADDR_MIN	KSEG1ADDR(ADM5120_SRAM0_BASE)
-#define BOOTEXT_ADDR_MAX	(BOOTEXT_ADDR_MIN + (2*1024*1024))
-
-static unsigned long __init zynos_detect_board(void)
-{
-	struct zynos_board_info *info;
-	struct zynos_board *board;
-	unsigned int vendor_id;
-	u16	board_id;
-	u32	t;
-	unsigned long ret;
-
-	ret = MACH_ADM5120_UNKNOWN;
-	/* check presence of the dbgarea */
-	if (zynos_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
-		goto out;
-
-	info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
-
-	/* check for a valid BootExt address */
-	t = zynos_get_bootext_addr(info);
-	if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
-		goto out;
-
-	vendor_id = zynos_get_vendor_id(info);
-	board_id = zynos_get_board_id(info);
-
-	for (board = zynos_boards; board->mach_type != MACH_ADM5120_UNKNOWN;
-		board++) {
-		if ((board->vendor_id == vendor_id) &&
-			(board->board_id == board_id)) {
-			ret = board->mach_type;
-			break;
-		}
-	}
-
-	/* assume Bootbase as the boot-loader */
-	adm5120_boot_loader = BOOT_LOADER_BOOTBASE;
-
-out:
-	return ret;
-}
-
-/*
- * U-Boot based boards
- */
-static int __init uboot_present(void)
-{
-	/* FIXME: not yet implemented */
-	return 0;
-}
-
-static unsigned long __init uboot_detect_board(void)
-{
-	/* FIXME: not yet implemented */
-	return MACH_ADM5120_UNKNOWN;
-}
-
-/*
- * Misc boards
- */
-static unsigned long __init prom_detect_board(void)
-{
-	char *name;
-	unsigned long ret;
-	int i;
-
-	ret = MACH_ADM5120_UNKNOWN;
-	name = prom_getenv("board_name");
-	if (name == NULL)
-		goto out;
-
-	if (*name == '\0')
-		goto out;
-
-	for (i=0; i<ARRAY_SIZE(common_boards); i++) {
-		if (strcmp(common_boards[i].name, name) == 0) {
-			ret = common_boards[i].mach_type;
-			break;
-		}
-	}
-
-out:
-	return ret;
-}
-
-static void __init adm5120_detect_board(void)
-{
-	struct adm5120_board *board;
-	unsigned long t;
-
-	adm5120_boot_loader = BOOT_LOADER_UNKNOWN;
-
-	/* Try to detect board type without bootloader */
-	t = routerboot_detect_board();
-
-	if (t == MACH_ADM5120_UNKNOWN)
-		t = zynos_detect_board();
-
-	if (t == MACH_ADM5120_UNKNOWN)
-		t = myloader_detect_board();
-
-	/* Try to detect bootloader type */
-	if (cfe_present()) {
-		adm5120_boot_loader = BOOT_LOADER_CFE;
-		if (t == MACH_ADM5120_UNKNOWN)
-			t = cfe_detect_board();
-	} else if (uboot_present()) {
-		adm5120_boot_loader = BOOT_LOADER_UBOOT;
-		if (t == MACH_ADM5120_UNKNOWN)
-			t = uboot_detect_board();
-	} else {
-		if (t == MACH_ADM5120_UNKNOWN)
-			t = prom_detect_board();
-	}
-
-	for (board = adm5120_boards; board->mach_type != MACH_ADM5120_UNKNOWN;
-		board++) {
-		if (board->mach_type == t)
-			break;
-	}
-
-	memcpy(&adm5120_board, board, sizeof(adm5120_board));
-}
 
 #define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
 #define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
@@ -912,28 +50,7 @@ static void __init adm5120_detect_board(void)
 #define CODE_GET_CLKS(c)	(((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
 #define CODE_GET_NAB(c)		(((c) & CODE_NAB) != 0)
 
-static void __init adm5120_detect_cpuinfo(void)
-{
-	u32 code;
-	u32 clks;
-
-	code = SWITCH_READ(SWITCH_REG_CODE);
-
-	adm5120_product_code = CODE_GET_PC(code);
-	adm5120_revision = CODE_GET_REV(code);
-	adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
-		ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
-	adm5120_nand_boot = CODE_GET_NAB(code);
-
-	clks = CODE_GET_CLKS(code);
-	adm5120_speed = ADM5120_SPEED_175;
-	if (clks & 1)
-		adm5120_speed += 25000000;
-	if (clks & 2)
-		adm5120_speed += 50000000;
-}
-
-static void adm5120_ndelay(u32 ns)
+void adm5120_ndelay(u32 ns)
 {
 	u32	t;
 
@@ -954,166 +71,23 @@ static void adm5120_ndelay(u32 ns)
 	SWITCH_WRITE(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
 }
 
-#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
-#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
-
-extern void prom_printf(char *, ...);
-#if 1
-#  define mem_dbg(f, a...)	prom_printf("mem_detect: " f, ## a)
-#else
-#  define mem_dbg(f, a...)
-#endif
-
-#define MEM_WR_DELAY	10000 /* 0.01 usec */
-
-static int mem_check_pattern(u8 *addr, unsigned long offs)
-{
-	volatile u32 *p1 = (volatile u32 *)addr;
-	volatile u32 *p2 = (volatile u32 *)(addr+offs);
-	u32 t,u,v;
-
-	/* save original value */
-	t = *p1;
-	u = *p2;
-
-	if (t != u)
-		return 0;
-
-	v = 0x55555555;
-	if (u == v)
-		v = 0xAAAAAAAA;
-
-	mem_dbg("write 0x%08lX to 0x%08lX\n", v, (unsigned long)p1);
-
-	*p1 = v;
-	mem_dbg("delay %d ns\n", MEM_WR_DELAY);
-	adm5120_ndelay(MEM_WR_DELAY);
-	u = *p2;
-
-	mem_dbg("pattern at 0x%08lX is 0x%08lX\n", (unsigned long)p2, u);
-
-	/* restore original value */
-	*p1 = t;
-
-	return (v == u);
-}
-
-static void __init adm5120_detect_memsize(void)
+void __init adm5120_soc_init(void)
 {
-	u32	memctrl;
-	u32	size, maxsize;
-	u8	*p;
-
-	memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL);
-	switch (memctrl & MEMCTRL_SDRS_MASK) {
-	case MEMCTRL_SDRS_4M:
-		maxsize = 4 << 20;
-		break;
-	case MEMCTRL_SDRS_8M:
-		maxsize = 8 << 20;
-		break;
-	case MEMCTRL_SDRS_16M:
-		maxsize = 16 << 20;
-		break;
-	default:
-		maxsize = 64 << 20;
-		break;
-	}
-
-	/* disable buffers for both SDRAM banks */
-	mem_dbg("disable buffers for both banks\n");
-	MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) & ~DC_BE);
-	MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) & ~DC_BE);
-
-	mem_dbg("checking for %ldMB chip in 1st bank\n", maxsize >> 20);
-
-	/* detect size of the 1st SDRAM bank */
-	p = (u8 *)KSEG1ADDR(0);
-	for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
-		if (mem_check_pattern(p, size)) {
-			/* mirrored address */
-			mem_dbg("mirrored data found at offset 0x%lX\n", size);
-			break;
-		}
-	}
-
-	mem_dbg("chip size in 1st bank is %ldMB\n", size >> 20);
-	adm5120_memsize = size;
-
-	if (size != maxsize)
-		/* 2nd bank is not supported */
-		goto out;
-
-	if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
-		/* 2nd bank is disabled */
-		goto out;
-
-	/*
-	 * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
-	 * are missing.
-	 */
-	mem_dbg("check presence of 2nd bank\n");
-
-	p = (u8 *)KSEG1ADDR(maxsize+size-4);
-	if (mem_check_pattern(p, 0)) {
-		adm5120_memsize += size;
-	}
-
-	if (maxsize != size) {
-		/* adjusting MECTRL register */
-		memctrl &= ~(MEMCTRL_SDRS_MASK);
-		switch (size>>20) {
-		case 4:
-			memctrl |= MEMCTRL_SDRS_4M;
-			break;
-		case 8:
-			memctrl |= MEMCTRL_SDRS_8M;
-			break;
-		case 16:
-			memctrl |= MEMCTRL_SDRS_16M;
-			break;
-		default:
-			memctrl |= MEMCTRL_SDRS_64M;
-			break;
-		}
-		SWITCH_WRITE(SWITCH_REG_MEMCTRL, memctrl);
-	}
-
-out:
-	/* reenable buffer for both SDRAM banks */
-	mem_dbg("enable buffers for both banks\n");
-	MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) | DC_BE);
-	MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) | DC_BE);
-
-	mem_dbg("%dx%ldMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
-		size >>20);
-
-	size = adm5120_board_memsize();
-	if (size > 0 && size != adm5120_memsize) {
-		mem_dbg("wrong memory size detected, board settings will be used\n");
-		adm5120_memsize = size;
-	}
-}
+	u32 code;
+	u32 clks;
 
-void __init adm5120_info_show(void)
-{
-	/* FIXME: move this somewhere else */
-	printk(KERN_INFO "ADM%04X%s revision %d, running at %ldMHz\n",
-		adm5120_product_code,
-		(adm5120_package == ADM5120_PACKAGE_BGA) ? "" : "P",
-		adm5120_revision, (adm5120_speed / 1000000)
-		);
-	printk(KERN_INFO "Boot loader is: %s\n", boot_loader_names[adm5120_boot_loader]);
-	printk(KERN_INFO "Booted from   : %s flash\n", adm5120_nand_boot ? "NAND":"NOR");
-	printk(KERN_INFO "Board is      : %s\n", adm5120_board_name());
-	printk(KERN_INFO "Memory size   : %ldMB\n", adm5120_memsize >> 20);
-}
+	code = SWITCH_READ(SWITCH_REG_CODE);
 
-void __init adm5120_info_init(void)
-{
-	adm5120_detect_cpuinfo();
-	adm5120_detect_board();
-	adm5120_detect_memsize();
+	adm5120_product_code = CODE_GET_PC(code);
+	adm5120_revision = CODE_GET_REV(code);
+	adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
+		ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
+	adm5120_nand_boot = CODE_GET_NAB(code);
 
-	adm5120_info_show();
+	clks = CODE_GET_CLKS(code);
+	adm5120_speed = ADM5120_SPEED_175;
+	if (clks & 1)
+		adm5120_speed += 25000000;
+	if (clks & 2)
+		adm5120_speed += 50000000;
 }
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c
new file mode 100644
index 000000000..a4643837c
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c
@@ -0,0 +1,119 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 generic board code
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static LIST_HEAD(adm5120_boards);
+static char adm5120_board_name[ADM5120_BOARD_NAMELEN];
+
+const char *get_system_type(void)
+{
+	return adm5120_board_name;
+}
+
+static struct adm5120_board * __init adm5120_board_find(unsigned long machtype)
+{
+	struct list_head *this;
+	struct adm5120_board *board;
+	void *ret;
+
+	ret = NULL;
+	list_for_each(this, &adm5120_boards) {
+		board = list_entry(this, struct adm5120_board, list);
+		if (board->mach_type == machtype) {
+			ret = board;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int __init adm5120_board_setup(void)
+{
+	struct adm5120_board *board;
+	int err;
+
+	board = adm5120_board_find(mips_machtype);
+	if (board == NULL) {
+		printk(KERN_ALERT "adm5120: no board registered for machtype %lu"
+			", trying generic\n", mips_machtype);
+		board = adm5120_board_find(MACH_ADM5120_GENERIC);
+		if (board == NULL)
+			panic("adm5120: unsupported board\n");
+	}
+
+	printk(KERN_INFO "adm5120: setting up board '%s'\n", board->name);
+
+	memcpy(&adm5120_board_name, board->name, ADM5120_BOARD_NAMELEN);
+
+	adm5120_board_reset = board->board_reset;
+	if (board->num_eth_ports > 0)
+		adm5120_eth_num_ports = board->num_eth_ports;
+
+	if (board->board_setup)
+		board->board_setup();
+
+	/* register PCI controller */
+	if (adm5120_package_bga())
+		platform_device_register(&adm5120_pci_device);
+
+	/* register board devices */
+	if (board->num_devices > 0 && board->devices != NULL ) {
+		err = platform_add_devices(board->devices, board->num_devices);
+		if (err)
+			printk(KERN_ALERT "adm5120: adding board devices failed\n");
+	}
+
+	return 0;
+}
+
+void __init adm5120_board_register(struct adm5120_board *board)
+{
+	list_add(&board->list, &adm5120_boards);
+	printk(KERN_INFO "adm5120: registered board '%s'\n", board->name);
+}
+
+void __init adm5120_register_boards(struct adm5120_board **boards,
+		int num)
+{
+	int i;
+
+	for (i=0; i<num; i++)
+		adm5120_board_register(boards[i]);
+}
+
+arch_initcall(adm5120_board_setup);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile
new file mode 100644
index 000000000..a05c89156
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for platforms based on ADM5120 SoC
+#
+
+obj-y	+= generic.o
+obj-y	+= cellvision.o
+obj-y	+= compex.o
+obj-y	+= edimax.o
+obj-y	+= infineon.o
+obj-y	+= mikrotik.o
+obj-y	+= zyxel.o
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c
new file mode 100644
index 000000000..fb844b7bb
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c
@@ -0,0 +1,190 @@
+/*
+ *  $Id$
+ *
+ *  Cellvision/SparkLAN boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN5, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN5, 1);
+		break;
+	}
+}
+
+static struct mtd_partition cas6xx_partitions[] = {
+	{
+		.name	= "admboot",
+		.offset	= 0,
+		.size	= 32*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 32*1024,
+	} , {
+		.name	= "nvfs1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64*1024,
+	} , {
+		.name	= "nvfs2",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct mtd_partition cas7xx_partitions[] = {
+	{
+		.name	= "admboot",
+		.offset	= 0,
+		.size	= 32*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 32*1024,
+	} , {
+		.name	= "nvfs",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 128*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *cas6xx_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static struct platform_device *cas7xx_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static void __init cas6xx_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL);	/* for flash A20 line */
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
+	adm5120_flash0_data.parts = cas6xx_partitions;
+
+	/* TODO: setup mac address */
+}
+
+static void __init cas7xx_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL);	/* for flash A20 line */
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
+	adm5120_flash0_data.parts = cas7xx_partitions;
+
+	/* TODO: setup mac address */
+}
+
+static struct adm5120_board cas630_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS630,
+	.name		= "Cellvision CAS-630/630W",
+	.board_setup	= cas6xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas6xx_devices),
+	.devices	= cas6xx_devices,
+};
+
+static struct adm5120_board cas670_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS670,
+	.name		= "Cellvision CAS-670/670W",
+	.board_setup	= cas6xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas6xx_devices),
+	.devices	= cas6xx_devices,
+};
+
+static struct adm5120_board cas700_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS700,
+	.name		= "Cellvision CAS-700/700W",
+	.board_setup	= cas7xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static struct adm5120_board cas771_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS771,
+	.name		= "Cellvision CAS-771/771W",
+	.board_setup	= cas7xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static struct adm5120_board cas790_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS790,
+	.name		= "Cellvision CAS-790",
+	.board_setup	= cas7xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static struct adm5120_board cas861_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS861,
+	.name		= "Cellvision CAS-861/861W",
+	.board_setup	= cas7xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&cas630_board);
+	adm5120_board_register(&cas670_board);
+	adm5120_board_register(&cas700_board);
+	adm5120_board_register(&cas771_board);
+	adm5120_board_register(&cas790_board);
+	adm5120_board_register(&cas861_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c
new file mode 100644
index 000000000..bbc5106e2
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c
@@ -0,0 +1,192 @@
+/*
+ *  $Id$
+ *
+ *  Compex boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN5, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN5, 1);
+		break;
+	}
+}
+
+static void wp54_reset(void)
+{
+	gpio_direction_output(ADM5120_GPIO_PIN3, 0);
+}
+
+static struct mtd_partition wp54g_wrt_partitions[] = {
+	{
+		.name	= "cfe",
+		.offset	= 0,
+		.size	= 0x050000,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "trx",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 0x3A0000,
+	} , {
+		.name	= "nvram",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 0x010000,
+	}
+};
+
+static struct platform_device *np2xg_devices[] __initdata = {
+	&adm5120_flash0_device,
+	&adm5120_usbc_device,
+};
+
+static struct platform_device *wp54_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static void __init np2xg_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+
+	/* TODO: setup mac address */
+}
+
+static void __init wp54_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+	gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+
+	/* TODO: setup mac address */
+}
+
+static void __init wp54_wrt_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+	gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
+	adm5120_flash0_data.parts = wp54g_wrt_partitions;
+
+	/* TODO: setup mac address */
+}
+
+static struct adm5120_board np27g_board __initdata = {
+	.mach_type	= MACH_ADM5120_NP27G,
+	.name		= "Compex NetPassage 27G",
+	.board_setup	= np2xg_setup,
+	.num_eth_ports	= 4,
+	.num_devices	= ARRAY_SIZE(np2xg_devices),
+	.devices	= np2xg_devices,
+};
+
+static struct adm5120_board np28g_board __initdata = {
+	.mach_type	= MACH_ADM5120_NP28G,
+	.name		= "Compex NetPassage 28G",
+	.board_setup	= np2xg_setup,
+	.num_eth_ports	= 3,
+	.num_devices	= ARRAY_SIZE(np2xg_devices),
+	.devices	= np2xg_devices,
+};
+
+static struct adm5120_board wp54ag_board __initdata = {
+	.mach_type	= MACH_ADM5120_WP54AG,
+	.name		= "Compex WP54AG",
+	.board_setup	= wp54_setup,
+	.board_reset	= wp54_reset,
+	.num_eth_ports	= 2,
+	.num_devices	= ARRAY_SIZE(wp54_devices),
+	.devices	= wp54_devices,
+};
+
+static struct adm5120_board wp54g_board __initdata = {
+	.mach_type	= MACH_ADM5120_WP54G,
+	.name		= "Compex WP54G",
+	.board_setup	= wp54_setup,
+	.board_reset	= wp54_reset,
+	.num_eth_ports	= 2,
+	.num_devices	= ARRAY_SIZE(wp54_devices),
+	.devices	= wp54_devices,
+};
+
+static struct adm5120_board wp54g_wrt_board __initdata = {
+	.mach_type	= MACH_ADM5120_WP54G,
+	.name		= "Compex WP54G-WRT",
+	.board_setup	= wp54_wrt_setup,
+	.board_reset	= wp54_reset,
+	.num_eth_ports	= 2,
+	.num_devices	= ARRAY_SIZE(wp54_devices),
+	.devices	= wp54_devices,
+};
+
+static struct adm5120_board wpp54ag_board __initdata = {
+	.mach_type	= MACH_ADM5120_WPP54AG,
+	.name		= "Compex WPP54AG",
+	.board_setup	= wp54_setup,
+	.board_reset	= wp54_reset,
+	.num_eth_ports	= 2,
+	.num_devices	= ARRAY_SIZE(wp54_devices),
+	.devices	= wp54_devices,
+};
+
+static struct adm5120_board wpp54g_board __initdata = {
+	.mach_type	= MACH_ADM5120_WPP54G,
+	.name		= "Compex WPP54G",
+	.board_setup	= wp54_setup,
+	.board_reset	= wp54_reset,
+	.num_eth_ports	= 2,
+	.num_devices	= ARRAY_SIZE(wp54_devices),
+	.devices	= wp54_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&np27g_board);
+	adm5120_board_register(&np28g_board);
+	adm5120_board_register(&wp54ag_board);
+	adm5120_board_register(&wp54g_board);
+	adm5120_board_register(&wp54g_wrt_board);
+	adm5120_board_register(&wpp54ag_board);
+	adm5120_board_register(&wpp54g_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c
new file mode 100644
index 000000000..f39d5c763
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c
@@ -0,0 +1,79 @@
+/*
+ *  $Id$
+ *
+ *  Edimax boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static struct mtd_partition br6104k_partitions[] = {
+	{
+		.name	= "admboot",
+		.offset	= 0,
+		.size	= 32*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 32*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *br6104k_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static void __init br6104k_setup(void) {
+	/* setup data for flash0 device */
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(br6104k_partitions);
+	adm5120_flash0_data.parts = br6104k_partitions;
+
+	/* TODO: setup mac addresses, if possible */
+}
+
+static struct adm5120_board br6104k_board __initdata = {
+	.mach_type	= MACH_ADM5120_BR6104K,
+	.name		= "Edimax BR-6104K",
+	.board_setup	= br6104k_setup,
+	.num_eth_ports	= 5,
+	.num_devices	= ARRAY_SIZE(br6104k_devices),
+	.devices	= br6104k_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&br6104k_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c
new file mode 100644
index 000000000..8d795a881
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c
@@ -0,0 +1,53 @@
+/*
+ *  $Id$
+ *
+ *  Generic ADM5120 based board
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static struct platform_device *generic_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static struct adm5120_board generic_board __initdata = {
+	.mach_type	= MACH_ADM5120_GENERIC,
+	.name		= "Generic ADM5120 board",
+	.num_eth_ports	= 6,
+	.num_devices	= ARRAY_SIZE(generic_devices),
+	.devices	= generic_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&generic_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c
new file mode 100644
index 000000000..30501d95b
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c
@@ -0,0 +1,95 @@
+/*
+ *  $Id$
+ *
+ *  Infineon boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio3(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN3, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN3, 1);
+		break;
+	}
+}
+
+static struct mtd_partition easy83000_partitions[] = {
+	{
+		.name	= "admboot",
+		.offset	= 0,
+		.size	= 64*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "boardcfg",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *easy83000_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static void __init easy83000_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio3;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy83000_partitions);
+	adm5120_flash0_data.parts = easy83000_partitions;
+
+	/* TODO: setup mac addresses */
+}
+
+static struct adm5120_board easy83000_board __initdata = {
+	.mach_type	= MACH_ADM5120_EASY83000,
+	.name		= "Infineon EASY-83000",
+	.board_setup	= easy83000_setup,
+	.num_eth_ports	= 6,
+	.num_devices	= ARRAY_SIZE(easy83000_devices),
+	.devices	= easy83000_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&easy83000_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c
new file mode 100644
index 000000000..7ced1f196
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c
@@ -0,0 +1,116 @@
+/*
+ *  $Id$
+ *
+ *  Mikrotik RouterBOARDs 111/112/133/133C/153
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static struct mtd_partition rb1xx_partitions[] = {
+	{
+		.name	= "booter",
+		.offset	= 0,
+		.size	= 64*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *rb1xx_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static void __init rb1xx_setup(void)
+{
+	/* setup data for flash0 device */
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions);
+	adm5120_flash0_data.parts = rb1xx_partitions;
+
+	/* TODO: setup mac address */
+}
+
+static struct adm5120_board rb111_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_111,
+	.name		= "Mikrotik RouterBOARD 111",
+	.board_setup	= rb1xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(rb1xx_devices),
+	.devices	= rb1xx_devices,
+};
+
+static struct adm5120_board rb112_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_112,
+	.name		= "Mikrotik RouterBOARD 112",
+	.board_setup	= rb1xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(rb1xx_devices),
+	.devices	= rb1xx_devices,
+};
+
+static struct adm5120_board rb133_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_133,
+	.name		= "Mikrotik RouterBOARD 133",
+	.board_setup	= rb1xx_setup,
+	.num_eth_ports	= 3,
+	.num_devices	= ARRAY_SIZE(rb1xx_devices),
+	.devices	= rb1xx_devices,
+};
+
+static struct adm5120_board rb133c_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_133C,
+	.name		= "Mikrotik RouterBOARD 133C",
+	.board_setup	= rb1xx_setup,
+	.num_eth_ports	= 1,
+	.num_devices	= ARRAY_SIZE(rb1xx_devices),
+	.devices	= rb1xx_devices,
+};
+
+static struct adm5120_board rb153_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_153,
+	.name		= "Mikrotik RouterBOARD 153",
+	.board_setup	= rb1xx_setup,
+	.num_eth_ports	= 5,
+	.num_devices	= ARRAY_SIZE(rb1xx_devices),
+	.devices	= rb1xx_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&rb111_board);
+	adm5120_board_register(&rb112_board);
+	adm5120_board_register(&rb133_board);
+	adm5120_board_register(&rb133c_board);
+	adm5120_board_register(&rb153_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c
new file mode 100644
index 000000000..8b5787660
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c
@@ -0,0 +1,108 @@
+/*
+ *  $Id$
+ *
+ *  ZyXEL Prestige P-334/P-335 boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN5, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN5, 1);
+		break;
+	}
+}
+
+static struct mtd_partition p33x_partitions[] = {
+	{
+		.name	= "bootbase",
+		.offset	= 0,
+		.size	= 16*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "rom",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 16*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *p334_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static struct platform_device *p335_devices[] __initdata = {
+	&adm5120_flash0_device,
+	&adm5120_usbc_device,
+};
+
+static void __init p33x_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
+	adm5120_flash0_data.parts = p33x_partitions;
+
+	/* TODO: setup mac address */
+}
+
+static struct adm5120_board p334wt_board __initdata = {
+	.mach_type	= MACH_ADM5120_P334WT,
+	.name		= "ZyXEL Prestige 334WT",
+	.board_setup	= p33x_setup,
+	.num_devices	= ARRAY_SIZE(p334_devices),
+	.devices	= p334_devices,
+};
+
+static struct adm5120_board p335_board __initdata = {
+	.mach_type	= MACH_ADM5120_P335,
+	.name		= "ZyXEL Prestige 335/335WT",
+	.board_setup	= p33x_setup,
+	.num_devices	= ARRAY_SIZE(p335_devices),
+	.devices	= p335_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&p334wt_board);
+	adm5120_board_register(&p335_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c
index 5ae5d7494..1fac84bb5 100644
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c
@@ -345,7 +345,7 @@ static int __init adm5120_gpio_init(void)
 	return 0;
 }
 
-subsys_initcall(adm5120_gpio_init);
+pure_initcall(adm5120_gpio_init);
 
 EXPORT_SYMBOL(adm5120_gpio_direction_output);
 EXPORT_SYMBOL(adm5120_gpio_direction_input);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c
index 190a0788f..b60257245 100644
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c
@@ -1,90 +1,179 @@
-/*****************************************************************************
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2003 ADMtek Incorporated.
- *	daniell@admtek.com.tw
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+/*
+ *  $Id$
  *
- * ########################################################################
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
  *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
  *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
  *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
  *
- * ########################################################################
- *
- *****************************************************************************/
+ */
 
-#include <linux/autoconf.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/pfn.h>
-#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
 
 #include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/sections.h>
+#include <asm/addrspace.h>
 
 #include <asm/mach-adm5120/adm5120_info.h>
-#include <asm-mips/mips-boards/prom.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_mpmc.h>
+
+#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
+#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
+
+#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
+#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
+
+#if 1
+#  define mem_dbg(f, a...)	printk("mem_detect: " f, ## a)
+#else
+#  define mem_dbg(f, a...)
+#endif
 
-#define PFN_ALIGN(x)    (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+#define MEM_WR_DELAY	10000 /* 0.01 usec */
 
-struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+unsigned long adm5120_memsize;
 
-struct prom_pmemblock * __init prom_getmdesc(void)
+static int __init mem_check_pattern(u8 *addr, unsigned long offs)
 {
-	unsigned int memsize;
-	char cmdline[CL_SIZE], *ptr;
-
-	memsize = adm5120_memsize;
-	/* Check the command line for a memsize directive that overrides
-	 * the physical/default amount */
-	strcpy(cmdline, arcs_cmdline);
-	ptr = strstr(cmdline, "memsize=");
-	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-	ptr = strstr(ptr, " memsize=");
-
-	if (ptr)
-		memsize = memparse(ptr + 8, &ptr);
-	
-	memset(mdesc, 0, sizeof(mdesc));
-	mdesc[0].type = BOOT_MEM_RAM;
-	mdesc[0].base = CPHYSADDR(PFN_ALIGN(&_end));
-	mdesc[0].size = memsize - mdesc[0].base;
-
-	return &mdesc[0];
+	volatile u32 *p1 = (volatile u32 *)addr;
+	volatile u32 *p2 = (volatile u32 *)(addr+offs);
+	u32 t,u,v;
+
+	/* save original value */
+	t = *p1;
+	u = *p2;
+
+	if (t != u)
+		return 0;
+
+	v = 0x55555555;
+	if (u == v)
+		v = 0xAAAAAAAA;
+
+	mem_dbg("write 0x%08lX to 0x%08lX\n", v, (unsigned long)p1);
+
+	*p1 = v;
+	mem_dbg("delay %d ns\n", MEM_WR_DELAY);
+	adm5120_ndelay(MEM_WR_DELAY);
+	u = *p2;
+
+	mem_dbg("pattern at 0x%08lX is 0x%08lX\n", (unsigned long)p2, u);
+
+	/* restore original value */
+	*p1 = t;
+
+	return (v == u);
 }
 
-void __init prom_meminit(void)
+static void __init adm5120_detect_memsize(void)
 {
-	struct prom_pmemblock *p;
-
-	p = prom_getmdesc();
-
-	while (p->size)
-	{
-		long type;
-		unsigned long base, size;
-		base = p->base;
-		type = p->type,
-		size = p->size;
-		add_memory_region(base, size, type);
-		p++;
+	u32	memctrl;
+	u32	size, maxsize;
+	u8	*p;
+
+	memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL);
+	switch (memctrl & MEMCTRL_SDRS_MASK) {
+	case MEMCTRL_SDRS_4M:
+		maxsize = 4 << 20;
+		break;
+	case MEMCTRL_SDRS_8M:
+		maxsize = 8 << 20;
+		break;
+	case MEMCTRL_SDRS_16M:
+		maxsize = 16 << 20;
+		break;
+	default:
+		maxsize = 64 << 20;
+		break;
 	}
+
+	/* disable buffers for both SDRAM banks */
+	mem_dbg("disable buffers for both banks\n");
+	MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) & ~DC_BE);
+	MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) & ~DC_BE);
+
+	mem_dbg("checking for %ldMB chip in 1st bank\n", maxsize >> 20);
+
+	/* detect size of the 1st SDRAM bank */
+	p = (u8 *)KSEG1ADDR(0);
+	for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
+		if (mem_check_pattern(p, size)) {
+			/* mirrored address */
+			mem_dbg("mirrored data found at offset 0x%lX\n", size);
+			break;
+		}
+	}
+
+	mem_dbg("chip size in 1st bank is %ldMB\n", size >> 20);
+	adm5120_memsize = size;
+
+	if (size != maxsize)
+		/* 2nd bank is not supported */
+		goto out;
+
+	if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
+		/* 2nd bank is disabled */
+		goto out;
+
+	/*
+	 * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
+	 * are missing.
+	 */
+	mem_dbg("check presence of 2nd bank\n");
+
+	p = (u8 *)KSEG1ADDR(maxsize+size-4);
+	if (mem_check_pattern(p, 0)) {
+		adm5120_memsize += size;
+	}
+
+	if (maxsize != size) {
+		/* adjusting MECTRL register */
+		memctrl &= ~(MEMCTRL_SDRS_MASK);
+		switch (size>>20) {
+		case 4:
+			memctrl |= MEMCTRL_SDRS_4M;
+			break;
+		case 8:
+			memctrl |= MEMCTRL_SDRS_8M;
+			break;
+		case 16:
+			memctrl |= MEMCTRL_SDRS_16M;
+			break;
+		default:
+			memctrl |= MEMCTRL_SDRS_64M;
+			break;
+		}
+		SWITCH_WRITE(SWITCH_REG_MEMCTRL, memctrl);
+	}
+
+out:
+	/* reenable buffer for both SDRAM banks */
+	mem_dbg("enable buffers for both banks\n");
+	MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) | DC_BE);
+	MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) | DC_BE);
+
+	mem_dbg("%dx%ldMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
+		size >>20);
 }
 
-void __init prom_free_prom_memory(void)
+void __init adm5120_mem_init(void)
 {
-	/* We do not have to prom memory to free */
+	adm5120_detect_memsize();
+	add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM);
 }
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c
new file mode 100644
index 000000000..8fd89ae7c
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c
@@ -0,0 +1,111 @@
+/*
+ *  $Id$
+ *
+ *  Generic ADM5120 platform devices
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+#if 1
+/*
+ * TODO:remove global adm5120_eth* variables when the switch driver will be
+ *	converted into a real platform driver
+ */
+unsigned int adm5120_eth_num_ports = 6;
+unsigned char adm5120_eth_macs[6][6] = {
+	{'\00', 'A', 'D', 'M', '\x51', '\x20' },
+	{'\00', 'A', 'D', 'M', '\x51', '\x21' },
+	{'\00', 'A', 'D', 'M', '\x51', '\x22' },
+	{'\00', 'A', 'D', 'M', '\x51', '\x23' },
+	{'\00', 'A', 'D', 'M', '\x51', '\x24' },
+	{'\00', 'A', 'D', 'M', '\x51', '\x25' }
+};
+
+EXPORT_SYMBOL_GPL(adm5120_eth_num_ports);
+EXPORT_SYMBOL_GPL(adm5120_eth_macs);
+#else
+/* Built-in ethernet switch */
+struct adm5120_switch_platform_data adm5120_switch_data;
+struct platform_device adm5120_switch_device = {
+	.name	= "adm5120-switch",
+	.id	= -1,
+	.dev.platform_data = &adm5120_switch_data,
+};
+#endif
+
+/* PCI Host Controller */
+struct adm5120_pci_platform_data adm5120_pci_data;
+struct platform_device adm5120_pci_device = {
+	.name	= "adm5120-pci",
+	.id	= -1,
+	.dev.platform_data = &adm5120_pci_data,
+};
+
+/* USB Host Controller */
+struct resource adm5120_usbc_resources[] = {
+	[0] = {
+		.start	= ADM5120_USBC_BASE,
+		.end	= ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= ADM5120_IRQ_USBC,
+		.end	= ADM5120_IRQ_USBC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device adm5120_usbc_device = {
+	.name		= "adm5120-usbc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(adm5120_usbc_resources),
+	.resource	= adm5120_usbc_resources,
+};
+
+/* NOR flash 0 */
+struct adm5120_flash_platform_data adm5120_flash0_data;
+struct platform_device adm5120_flash0_device =	{
+	.name	= "adm5120-flash",
+	.id	= 0,
+	.dev.platform_data = &adm5120_flash0_data,
+};
+
+/* NOR flash 1 */
+struct adm5120_flash_platform_data adm5120_flash1_data;
+struct platform_device adm5120_flash1_device =	{
+	.name	= "adm5120-flash",
+	.id	= 1,
+	.dev.platform_data = &adm5120_flash1_data,
+};
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c
index c2e1dcbae..97ecc99bc 100644
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c
@@ -1,96 +1,200 @@
-/*****************************************************************************
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2003 ADMtek Incorporated.
- *	daniell@admtek.com.tw
- * Copyright (C) 2007 OpenWrt.org
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific prom routines
  *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
  *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
  *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
  *
- *****************************************************************************/
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
 
 #include <linux/init.h>
-#include <linux/autoconf.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/bootmem.h>
 
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 
 #include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_uart.h>
 
-static char **prom_envp = NULL;
+#include <prom/cfe.h>
+#include <prom/generic.h>
+#include <prom/routerboot.h>
+#include <prom/myloader.h>
+#include <prom/zynos.h>
 
-void setup_prom_printf(int);
-void prom_printf(char *, ...);
-void prom_meminit(void);
+unsigned int adm5120_prom_type	= ADM5120_PROM_GENERIC;
 
+struct board_desc {
+	unsigned long	mach_type;
+	char		*name;
+};
 
-#define READCSR(r)      *(volatile unsigned long *)(0xB2600000+(r))
-#define WRITECSR(r,v)   *(volatile unsigned long *)(0xB2600000+(r)) = v
+#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)}
+static struct board_desc common_boards[] __initdata = {
+	/* Cellvision/SparkLAN boards */
+	DEFBOARD("CAS-630",		MACH_ADM5120_CAS630),
+	DEFBOARD("CAS-670",		MACH_ADM5120_CAS670),
+	DEFBOARD("CAS-771",		MACH_ADM5120_CAS771),
+	DEFBOARD("CAS-790",		MACH_ADM5120_CAS790),
+	DEFBOARD("CAS-861",		MACH_ADM5120_CAS861),
+	/* Compex boards */
+	DEFBOARD("WP54G-WRT",		MACH_ADM5120_WP54G_WRT),
+	/* Edimax boards */
+	DEFBOARD("BR-6104K",		MACH_ADM5120_BR6104K),
+	DEFBOARD("BR-6104KP",		MACH_ADM5120_BR6104K),
+	/* Infineon boards */
+	DEFBOARD("EASY 5120",		MACH_ADM5120_EASY5120),
+	DEFBOARD("EASY 5120-RT",	MACH_ADM5120_EASY5120RT),
+	DEFBOARD("EASY 5120P-ATA",	MACH_ADM5120_EASY5120PATA),
+	DEFBOARD("EASY 83000",		MACH_ADM5120_EASY83000),
+	/* Mikrotik RouterBOARDs */
+	DEFBOARD("111",			MACH_ADM5120_RB_111),
+	DEFBOARD("112",			MACH_ADM5120_RB_112),
+	DEFBOARD("133",			MACH_ADM5120_RB_133),
+	DEFBOARD("133C",		MACH_ADM5120_RB_133C),
+	DEFBOARD("miniROUTER",		MACH_ADM5120_RB_150),
+	DEFBOARD("153",			MACH_ADM5120_RB_153),
+};
 
-#define UART_DR_REG         0x00
-#define UART_FR_REG         0x18
-#define UART_TX_FIFO_FULL   0x20
+static unsigned long __init find_machtype_byname(char *name)
+{
+	unsigned long ret;
+	int i;
+
+	ret = MACH_ADM5120_GENERIC;
+	if (name == NULL)
+		goto out;
 
-int putPromChar(char c)
+	if (*name == '\0')
+		goto out;
+
+	for (i=0; i<ARRAY_SIZE(common_boards); i++) {
+		if (strcmp(common_boards[i].name, name) == 0) {
+			ret = common_boards[i].mach_type;
+			break;
+		}
+	}
+
+out:
+	return ret;
+}
+
+static unsigned long __init detect_machtype_routerboot(void)
 {
-	WRITECSR(UART_DR_REG, c);
-        while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) );
-        return 0;
+	char *name;
+
+	name = routerboot_get_boardname();
+	return find_machtype_byname(name);
 }
 
-/*
- * Ugly prom_printf used for debugging
- */
+static unsigned long __init detect_machtype_generic(void)
+{
+	char *name;
+
+	name = generic_prom_getenv("board");
+	return find_machtype_byname(name);
+}
 
-void prom_printf(char *fmt, ...)
+unsigned long __init detect_machtype_cfe(void)
 {
-        va_list args;
-        int l;
-        char *p, *buf_end;
-        char buf[1024];
-
-        va_start(args, fmt);
-        l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
-        va_end(args);
-
-        buf_end = buf + l;
-
-        for (p = buf; p < buf_end; p++) {
-                /* Crude cr/nl handling is better than none */
-                if (*p == '\n')
-                        putPromChar('\r');
-                putPromChar(*p);
-        }
+	char *name;
+
+	name = cfe_getenv("BOARD_NAME");
+	return find_machtype_byname(name);
 }
 
-char *prom_getenv(char *envname)
+static struct {
+	unsigned long	mach_type;
+	u16		vendor_id;
+	u16		board_id;
+} zynos_boards[] __initdata = {
+#define ZYNOS_BOARD(vi, bi, mt) { .vendor_id = (vi), .board_id = (bi), \
+		.mach_type = (mt) }
+
+#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
+#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
+#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
+	ZYXEL_BOARD(ZYNOS_BOARD_HS100,	MACH_ADM5120_HS100),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334,	MACH_ADM5120_P334),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334U,	MACH_ADM5120_P334U),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334W,	MACH_ADM5120_P334W),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334WH,	MACH_ADM5120_P334WH),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334WT,	MACH_ADM5120_P334WT),
+	ZYXEL_BOARD(ZYNOS_BOARD_P335,	MACH_ADM5120_P335),
+	ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
+	ZYXEL_BOARD(ZYNOS_BOARD_P335U,	MACH_ADM5120_P335U)
+};
+
+static unsigned long __init detect_machtype_bootbase(void)
 {
-	char **env;
-	char *ret;
+	unsigned long ret;
+	int i;
+
+	ret = MACH_ADM5120_GENERIC;
+	for (i=0; i<ARRAY_SIZE(zynos_boards); i++) {
+		if (zynos_boards[i].vendor_id == bootbase_info.vendor_id &&
+			zynos_boards[i].board_id == bootbase_info.board_id) {
+			ret = zynos_boards[i].mach_type;
+			break;
+		}
+	}
+
+	return ret;
+}
 
-	ret = NULL;
+static struct {
+	unsigned long	mach_type;
+	u16	vid;
+	u16	did;
+	u16	svid;
+	u16	sdid;
+} mylo_boards[]  __initdata = {
+#define MYLO_BOARD(v,d,sv,sd,mt) { .vid = (v), .did = (d), .svid = (sv), \
+	.sdid = (sd), .mach_type = (mt) }
+#define COMPEX_BOARD(d,mt) MYLO_BOARD(VENID_COMPEX,(d),VENID_COMPEX,(d),(mt))
 
-	if (prom_envp== NULL)
-		return NULL;
+	COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
+	COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
+	COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
+	COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54G),
+	COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
+	COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54AG),
+	COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WPP54G),
+	COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WPP54AG),
+};
 
-	for (env = prom_envp; *env != NULL; env++) {
-		if (strcmp(envname, *env++) == 0) {
-			ret = *env;
+static unsigned long __init detect_machtype_myloader(void)
+{
+	unsigned long ret;
+	int i;
+
+	ret = MACH_ADM5120_GENERIC;
+	for (i=0; i<ARRAY_SIZE(mylo_boards); i++) {
+		if (mylo_boards[i].vid == myloader_info.vid &&
+			mylo_boards[i].did == myloader_info.did &&
+			mylo_boards[i].svid == myloader_info.svid &&
+			mylo_boards[i].sdid == myloader_info.sdid) {
+			ret = mylo_boards[i].mach_type;
 			break;
 		}
 	}
@@ -98,29 +202,68 @@ char *prom_getenv(char *envname)
 	return ret;
 }
 
-extern char _image_cmdline;
-/*
- * initialize the prom module.
- */
-void __init prom_init(void)
+static void __init prom_detect_machtype(void)
 {
-	char *cmd;
+	if (bootbase_present()) {
+		adm5120_prom_type = ADM5120_PROM_BOOTBASE;
+		mips_machtype = detect_machtype_bootbase();
+		return;
+	}
 
-	if ((fw_arg2 & 3) == 0) {
-		prom_envp = (char **)fw_arg2;
+	if (cfe_present()) {
+		adm5120_prom_type = ADM5120_PROM_CFE;
+		mips_machtype = detect_machtype_cfe();
+		return;
 	}
 
-	adm5120_info_init();
+	if (myloader_present()) {
+		adm5120_prom_type = ADM5120_PROM_MYLOADER;
+		mips_machtype = detect_machtype_myloader();
+		return;
+	}
 
-	/* you should these macros defined in include/asm/bootinfo.h */
-	mips_machgroup = MACH_GROUP_ADM5120;
-	mips_machtype = adm5120_board.mach_type;
+	if (routerboot_present()) {
+		adm5120_prom_type = ADM5120_PROM_ROUTERBOOT;
+		mips_machtype = detect_machtype_routerboot();
+		return;
+	}
+
+	adm5120_prom_type = ADM5120_PROM_GENERIC;
+	mips_machtype = detect_machtype_generic();
+}
+
+/* TODO: this is an ugly hack for RouterBOARDS */
+extern char _image_cmdline;
+static void __init prom_init_cmdline(void)
+{
+	char *cmd;
 
 	/* init command line, register a default kernel command line */
 	cmd = &_image_cmdline + 8;
 	if( strlen(cmd) > 0) strcpy( &(arcs_cmdline[0]), cmd);
 		else strcpy(&(arcs_cmdline[0]), CONFIG_CMDLINE);
 
-	/* init memory map */
-	prom_meminit();
+}
+
+#define UART_READ(r) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))
+#define UART_WRITE(r,v) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))=(v)
+
+void __init prom_putchar(char ch)
+{
+	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+	UART_WRITE(UART_REG_DATA, ch);
+	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+}
+
+void __init prom_init(void)
+{
+	mips_machgroup = MACH_GROUP_ADM5120;
+	prom_detect_machtype();
+
+	prom_init_cmdline();
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* We do not have to prom memory to free */
 }
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile
new file mode 100644
index 000000000..d844b600f
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
+#
+
+lib-y	+= bootbase.o
+lib-y	+= cfe.o
+lib-y	+= generic.o
+lib-y	+= myloader.o
+lib-y	+= routerboot.o
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c
new file mode 100644
index 000000000..c54c4ce67
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c
@@ -0,0 +1,124 @@
+/*
+ *  $Id$
+ *
+ *  ZyXEL's Bootbase specific prom routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <adm5120_defs.h>
+#include <prom/zynos.h>
+#include "prom_read.h"
+
+#define ZYNOS_INFO_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
+#define ZYNOS_HDBG_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
+#define BOOTEXT_ADDR_MIN	KSEG1ADDR(ADM5120_SRAM0_BASE)
+#define BOOTEXT_ADDR_MAX	(BOOTEXT_ADDR_MIN + (2*1024*1024))
+
+static int bootbase_found = 0;
+static struct zynos_board_info *board_info;
+
+struct bootbase_info bootbase_info;
+
+static inline int bootbase_dbgarea_present(u8 *data)
+{
+	u32 t;
+
+	t = prom_read_be32(data+5);
+	if (t != ZYNOS_MAGIC_DBGAREA1)
+		return 0;
+
+	t = prom_read_be32(data+9);
+	if (t != ZYNOS_MAGIC_DBGAREA2)
+		return 0;
+
+	return 1;
+}
+
+static inline u32 bootbase_get_bootext_addr(void)
+{
+	return prom_read_be32(&board_info->bootext_addr);
+}
+
+static inline u16 bootbase_get_vendor_id(void)
+{
+#define CHECK_VENDOR(n) (strnicmp(board_info->vendor,(n),strlen(n)) == 0)
+	unsigned char vendor[ZYNOS_NAME_LEN];
+	int i;
+
+	for (i=0; i<ZYNOS_NAME_LEN; i++)
+		vendor[i]=board_info->vendor[i];
+
+	if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
+		return ZYNOS_VENDOR_ID_ZYXEL;
+
+	if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
+		return ZYNOS_VENDOR_ID_DLINK;
+
+	if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
+		return ZYNOS_VENDOR_ID_LUCENT;
+
+	if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
+		return ZYNOS_VENDOR_ID_NETGEAR;
+
+	return ZYNOS_VENDOR_ID_OTHER;
+}
+
+static inline u16 bootbase_get_board_id(void)
+{
+	return prom_read_be16(&board_info->board_id);
+}
+
+int __init bootbase_present(void)
+{
+	u32	t;
+
+	if (bootbase_found)
+		goto out;
+
+	/* check presence of the dbgarea */
+	if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
+		goto out;
+
+	board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
+
+	/* check for a valid BootExt address */
+	t = bootbase_get_bootext_addr();
+	if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
+		goto out;
+
+	bootbase_info.vendor_id = bootbase_get_vendor_id();
+	bootbase_info.board_id = bootbase_get_board_id();
+
+	bootbase_found = 1;
+
+out:
+	return bootbase_found;
+}
+
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c
new file mode 100644
index 000000000..cce69449c
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c
@@ -0,0 +1,86 @@
+/*
+ *  $Id$
+ *
+ *  Broadcom's CFE specific prom routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <prom/cfe.h>
+#include "prom_read.h"
+
+/*
+ * CFE based boards
+ */
+#define CFE_EPTSEAL	0x43464531 /* CFE1 is the magic number to recognize CFE
+from other bootloaders */
+
+static int cfe_found = 0;
+
+static u32 cfe_handle;
+static u32 cfe_entry;
+static u32 cfe_seal;
+
+int __init cfe_present(void)
+{
+	/*
+	 * This method only works, when we are booted directly from the CFE.
+	 */
+	u32 a1 = (u32) fw_arg1;
+
+	if (cfe_found)
+		return 1;
+
+	cfe_handle = (u32) fw_arg0;
+	cfe_entry = (u32) fw_arg2;
+	cfe_seal = (u32) fw_arg3;
+
+	/* Check for CFE by finding the CFE magic number */
+	if (cfe_seal != CFE_EPTSEAL) {
+		/* We are not booted from CFE */
+		return 0;
+	}
+
+	/* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
+	if (a1 != 0) {
+		return 0;
+	}
+
+	/* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+	if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) {
+		return 0;
+	}
+
+	cfe_found = 1;
+	return 1;
+}
+
+char *cfe_getenv(char *envname)
+{
+	if (cfe_found == 0)
+		return NULL;
+
+	return NULL;
+}
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c
new file mode 100644
index 000000000..412e9a7bd
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c
@@ -0,0 +1,60 @@
+/*
+ *  $Id$
+ *
+ *  Generic PROM routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+#include <prom/generic.h>
+
+static int *_prom_argc;
+static char **_prom_argv;
+static char **_prom_envp;
+
+char *generic_prom_getenv(char *envname)
+{
+	char **env;
+	char *ret;
+
+	ret = NULL;
+	for (env = _prom_envp; *env != NULL; env++) {
+		if (strcmp(envname, *env++) == 0) {
+			ret = *env;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+int generic_prom_present(void)
+{
+	_prom_argc = (int *)fw_arg0;
+	_prom_argv = (char **)fw_arg1;
+	_prom_envp = (char **)fw_arg2;
+
+	return 1;
+}
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c
new file mode 100644
index 000000000..972de4e53
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c
@@ -0,0 +1,75 @@
+/*
+ *  $Id$
+ *
+ *  Compex's MyLoader specific prom routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <adm5120_defs.h>
+#include <prom/myloader.h>
+#include "prom_read.h"
+
+#define SYS_PARAMS_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
+#define BOARD_PARAMS_ADDR	KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
+#define PART_TABLE_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
+
+static int myloader_found = 0;
+
+struct myloader_info myloader_info;
+
+int __init myloader_present(void)
+{
+	struct mylo_system_params *sysp;
+	struct mylo_board_params *boardp;
+	struct mylo_partition_table *parts;
+
+	if (myloader_found)
+		goto out;
+
+	sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
+	boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
+	parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
+
+	/* Check for some magic numbers */
+	if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
+	   (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
+	   (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
+		goto out;
+
+	myloader_info.vid = le32_to_cpu(sysp->vid);
+	myloader_info.did = le32_to_cpu(sysp->did);
+	myloader_info.svid = le32_to_cpu(sysp->svid);
+	myloader_info.sdid = le32_to_cpu(sysp->sdid);
+
+	myloader_found = 1;
+
+out:
+	return myloader_found;
+}
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h
new file mode 100644
index 000000000..8cef4a485
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h
@@ -0,0 +1,63 @@
+/*
+ *  $Id$
+ *
+ *  Generic prom definitions
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_PROM_H_
+#define _ADM5120_PROM_H_
+
+/*
+ * Helper routines
+ */
+static inline u16 prom_read_le16(void *buf)
+{
+	u8 *p = buf;
+
+	return ((u16)p[0] + ((u16)p[1] << 8));
+}
+
+static inline u32 prom_read_le32(void *buf)
+{
+	u8 *p = buf;
+
+	return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
+		((u32)p[3] << 24));
+}
+
+static inline u16 prom_read_be16(void *buf)
+{
+	u8 *p = buf;
+
+	return (((u16)p[0] << 8) + (u16)p[1]);
+}
+
+static inline u32 prom_read_be32(void *buf)
+{
+	u8 *p = buf;
+
+	return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
+		((u32)p[3]));
+}
+
+#endif /* _ADM5120_PROM_H_ */
+
+
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c
new file mode 100644
index 000000000..ad2835356
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c
@@ -0,0 +1,142 @@
+/*
+ *  $Id$
+ *
+ *  Mikrotik's RouterBOOT specific prom routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_defs.h>
+#include <prom/routerboot.h>
+#include "prom_read.h"
+
+static struct rb_hard_settings rb_hs;
+static int rb_found = 0;
+
+static int __init routerboot_load_hs(u8 *buf, u16 buflen)
+{
+	u16 id,len;
+	u8 *mac;
+	int i,j;
+
+	memset(&rb_hs, 0, sizeof(rb_hs));
+
+	if (buflen < 4)
+		return -1;
+
+	if (prom_read_le32(buf) != RB_MAGIC_HARD)
+		return -1;
+
+	/* skip magic value */
+	buf += 4;
+	buflen -= 4;
+
+	while (buflen > 2) {
+		id = prom_read_le16(buf);
+		buf += 2;
+		buflen -= 2;
+		if (id == RB_ID_TERMINATOR || buflen < 2)
+			break;
+
+		len = prom_read_le16(buf);
+		buf += 2;
+		buflen -= 2;
+
+		if (buflen < len)
+			break;
+
+		switch (id) {
+		case RB_ID_BIOS_VERSION:
+			rb_hs.bios_ver = (char *)buf;
+			break;
+		case RB_ID_BOARD_NAME:
+			rb_hs.name = (char *)buf;
+			break;
+		case RB_ID_MEMORY_SIZE:
+			rb_hs.mem_size = prom_read_le32(buf);
+			break;
+		case RB_ID_MAC_ADDRESS_COUNT:
+			rb_hs.mac_count = prom_read_le32(buf);
+			break;
+		case RB_ID_MAC_ADDRESS_PACK:
+			rb_hs.mac_count = len/RB_MAC_SIZE;
+			if (rb_hs.mac_count > RB_MAX_MAC_COUNT)
+				rb_hs.mac_count = RB_MAX_MAC_COUNT;
+			mac = buf;
+			for (i=0; i < rb_hs.mac_count; i++) {
+				for (j=0; j < RB_MAC_SIZE; j++)
+					rb_hs.macs[i][j] = mac[j];
+				mac += RB_MAC_SIZE;
+			}
+			break;
+		}
+
+		buf += len;
+		buflen -= len;
+
+	}
+
+	return 0;
+}
+
+#define RB_BS_OFFS	0x14
+#define RB_OFFS_MAX	(128*1024)
+
+int __init routerboot_present(void)
+{
+	struct rb_bios_settings	*bs;
+	u8 *base;
+	u32 off,len;
+
+	if (rb_found)
+		goto out;
+
+	base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
+	bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
+
+	off = prom_read_le32(&bs->hs_offs);
+	len = prom_read_le32(&bs->hs_size);
+	if (off > RB_OFFS_MAX)
+		goto out;
+
+	if (routerboot_load_hs(base+off, len) != 0)
+		goto out;
+
+	rb_found = 1;
+
+out:
+	return rb_found;
+}
+
+char *routerboot_get_boardname(void)
+{
+	if (rb_found == 0)
+		return NULL;
+
+	return rb_hs.name;
+}
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c
new file mode 100644
index 000000000..25184846a
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c
@@ -0,0 +1,62 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific reset routines
+ *
+ *  Copyright (C) ADMtek Incorporated.
+ *  Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+#define ADM5120_SOFTRESET	0x12000004
+
+void (*adm5120_board_reset)(void);
+
+void adm5120_restart(char *command)
+{
+	/* TODO: stop switch before reset */
+
+	if (adm5120_board_reset)
+		adm5120_board_reset();
+
+	*(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1;
+}
+
+void adm5120_halt(void)
+{
+        printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+        while (1);
+}
+
+void adm5120_power_off(void)
+{
+        adm5120_halt();
+}
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c
index aa30dc5c8..83cf74cb7 100644
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c
@@ -1,15 +1,32 @@
 /*
- *	Copyright (C) ADMtek Incorporated.
- *		Creator : daniell@admtek.com.tw
- *	Copyright 1999, 2000 MIPS Technologies, Inc.
- *	Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- *	Copyright (C) 2007 OpenWrt.org
+ *  $Id$
+ *
+ *  ADM5120 specific setup
+ *
+ *  Copyright (C) ADMtek Incorporated.
+ *  Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
  */
 
-#include <linux/autoconf.h>
 #include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
+#include <linux/kernel.h>
 
 #include <asm/reboot.h>
 #include <asm/io.h>
@@ -17,33 +34,34 @@
 
 #include <asm/mach-adm5120/adm5120_info.h>
 #include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
-
-extern void adm5120_time_init(void) __init;
-
-#define ADM5120_SOFTRESET	0x12000004
-
-void adm5120_restart(char *command)
-{
-	*(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1;
-}
-
-
-void adm5120_halt(void)
-{
-        printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-        while (1);
-}
-
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_board.h>
+
+static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
+	[ADM5120_PROM_GENERIC]		= "Generic",
+	[ADM5120_PROM_CFE]		= "CFE",
+	[ADM5120_PROM_UBOOT]		= "U-Boot",
+	[ADM5120_PROM_MYLOADER]		= "MyLoader",
+	[ADM5120_PROM_ROUTERBOOT]	= "RouterBOOT",
+	[ADM5120_PROM_BOOTBASE]		= "Bootbase"
+};
 
-void adm5120_power_off(void)
+static void __init adm5120_report(void)
 {
-        adm5120_halt();
+	printk(KERN_INFO "SoC      : ADM%04X%s revision %d, running at %ldMHz\n",
+		adm5120_product_code,
+		(adm5120_package == ADM5120_PACKAGE_BGA) ? "" : "P",
+		adm5120_revision, (adm5120_speed / 1000000)
+		);
+	printk(KERN_INFO "Bootdev  : %s flash\n", adm5120_nand_boot ? "NAND":"NOR");
+	printk(KERN_INFO "Prom     : %s\n", prom_names[adm5120_prom_type]);
 }
 
 void __init plat_mem_setup(void)
 {
-	printk(KERN_INFO "ADM5120 board setup\n");
+	adm5120_soc_init();
+	adm5120_mem_init();
+	adm5120_report();
 
 	board_time_init = adm5120_time_init;
 
@@ -53,39 +71,3 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(KSEG1);
 }
-
-const char *get_system_type(void)
-{
-	return adm5120_board_name();
-}
-
-static struct resource adm5120_hcd_resources[] = {
-	[0] = {
-		.start	= ADM5120_USBC_BASE,
-		.end	= ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= ADM5120_IRQ_USBC,
-		.end	= ADM5120_IRQ_USBC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device adm5120hcd_device = {
-	.name		= "adm5120-hcd",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(adm5120_hcd_resources),
-	.resource	= adm5120_hcd_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&adm5120hcd_device,
-};
-
-static int __init adm5120_init(void)
-{
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(adm5120_init);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c
new file mode 100644
index 000000000..0377892d3
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c
@@ -0,0 +1,219 @@
+/*
+ *  $Id$
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/kmod.h>
+#include <linux/root_dev.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/byteorder/generic.h>
+
+#define PFX	"trxsplit: "
+
+#define TRX_MAGIC	0x30524448	/* "HDR0" */
+#define TRX_VERSION	1
+#define TRX_MAX_LEN	0x3A0000
+#define TRX_NO_HEADER	1		/* Do not write TRX header */
+#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
+#define TRX_MAX_OFFSET	3
+#define TRX_MIN_KERNEL_SIZE	256*1024
+
+struct trx_header {
+	u32 magic;		/* "HDR0" */
+	u32 len;		/* Length of file including header */
+	u32 crc32;		/* 32-bit CRC from flag_version to end of file */
+	u32 flag_version;	/* 0:15 flags, 16:31 version */
+	u32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
+};
+
+#define BLOCK_LEN_MIN		0x10000
+
+static struct mtd_info *trx_mtd_master = NULL;
+static struct mtd_info *trx_mtds[TRX_MAX_OFFSET];
+static struct mtd_partition trx_parts[TRX_MAX_OFFSET];
+static struct trx_header trx_hdr;
+static int trx_nr_parts = 0;
+static int trx_rootfs_part = -1;
+
+static int __init trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset)
+{
+	size_t retlen;
+	int err;
+
+	err = mtd->read(mtd, offset, sizeof(trx_hdr), &retlen, (void *)&trx_hdr);
+	if (err)
+		goto err_out;
+
+	if (retlen != sizeof(trx_hdr))
+		goto err_out;
+
+	trx_hdr.magic = le32_to_cpu(trx_hdr.magic);
+	trx_hdr.len = le32_to_cpu(trx_hdr.len);
+	trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32);
+	trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version);
+	trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]);
+	trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]);
+	trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]);
+
+	/* sanity checks */
+	if (trx_hdr.magic != TRX_MAGIC)
+		goto err_out;
+
+	if (trx_hdr.len > mtd->size - offset)
+		goto err_out;
+
+	/* TODO: add crc32 checking too? */
+
+	return 1;
+
+err_out:
+	return 0;
+}
+
+static void __init trxsplit_create_partitions(struct mtd_info *mtd,
+	unsigned long offset)
+{
+	struct mtd_partition *part = trx_parts;
+	int i;
+
+	for (i=0;i<TRX_MAX_OFFSET;i++) {
+		part = &trx_parts[i];
+		if (trx_hdr.offsets[i] == 0)
+			continue;
+		part->offset = offset + trx_hdr.offsets[i];
+		part->mtdp = &trx_mtds[trx_nr_parts];
+		trx_nr_parts++;
+	}
+
+	for (i=0; i<trx_nr_parts-1; i++) {
+		trx_parts[i].size = trx_parts[i+1].offset - trx_parts[i].offset;
+	}
+	trx_parts[i].size = mtd->size - trx_parts[i].offset;
+
+	i=0;
+	part = &trx_parts[i];
+	if (part->size < TRX_MIN_KERNEL_SIZE) {
+		part->name = "trx_loader";
+		i++;
+	}
+
+	part = &trx_parts[i];
+	part->name = "trx_kernel";
+	i++;
+
+	part = &trx_parts[i];
+	part->name = "trx_rootfs";
+	trx_rootfs_part = i;
+}
+
+static void __init trxsplit_add_mtd(struct mtd_info *mtd)
+{
+	unsigned long offset;
+	unsigned long blocklen;
+	int found;
+
+	if (trx_mtd_master)
+		return;
+
+	blocklen = mtd->erasesize;
+	if (blocklen < BLOCK_LEN_MIN)
+		blocklen = BLOCK_LEN_MIN;
+
+	printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name);
+
+	found = 0;
+	for (offset=0; offset < mtd->size; offset+=blocklen) {
+		found = trxsplit_checktrx(mtd, offset);
+		if (found)
+			break;
+	}
+
+	if (found == 0) {
+		printk(KERN_ALERT PFX "no TRX header found\n");
+		return;
+	}
+
+	printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset);
+
+	trxsplit_create_partitions(mtd, offset);
+
+	trx_mtd_master = mtd;
+}
+
+static void trxsplit_remove_mtd(struct mtd_info *mtd)
+{
+}
+
+static struct mtd_notifier trxsplit_notifier __initdata = {
+	.add	= trxsplit_add_mtd,
+	.remove	= trxsplit_remove_mtd,
+};
+
+static void __init trxsplit_find_trx(void)
+{
+	register_mtd_user(&trxsplit_notifier);
+	unregister_mtd_user(&trxsplit_notifier);
+}
+
+static int __init trxsplit_init(void)
+{
+	int err;
+	int i;
+
+	trxsplit_find_trx();
+
+	if (trx_mtd_master == NULL)
+		goto err;
+
+	printk(KERN_INFO PFX "creating TRX partitions in '%s'\n",
+		trx_mtd_master->name);
+
+	err = add_mtd_partitions(trx_mtd_master, trx_parts, trx_nr_parts);
+	if (err) {
+		printk(KERN_ALERT PFX "creating TRX partitions failed\n");
+		goto err;
+	}
+
+	for (i=0; i<trx_nr_parts; i++) {
+		/* TODO: add error checking */
+		add_mtd_device(trx_mtds[i]);
+	}
+
+	if (ROOT_DEV == 0 && trx_rootfs_part >= 0) {
+		printk(KERN_INFO PFX "set '%s' to be root filesystem\n",
+			trx_mtds[trx_rootfs_part]->name);
+		ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, trx_mtds[trx_rootfs_part]->index);
+	}
+
+	return 0;
+
+err:
+	return -1;
+}
+
+late_initcall(trxsplit_init);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c b/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c
index e67064d64..cf450f066 100644
--- a/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c
@@ -25,7 +25,6 @@
  *
  */
 
-#include <linux/autoconf.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -125,8 +124,7 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	case MACH_ADM5120_WPP54AG:
 	case MACH_ADM5120_WPP54G:
 	default:
-		printk(KERN_ALERT "PCI: irq map is unknown for %s, using "
-			"defaults.\n",	adm5120_board_name());
+		printk(KERN_ALERT "PCI: irq map is unknown, using defaults.\n");
 		break;
 	}
 
diff --git a/target/linux/adm5120-2.6/files/drivers/leds/leds-adm5120.c b/target/linux/adm5120-2.6/files/drivers/leds/leds-adm5120.c
index ba0269d12..e8609d374 100644
--- a/target/linux/adm5120-2.6/files/drivers/leds/leds-adm5120.c
+++ b/target/linux/adm5120-2.6/files/drivers/leds/leds-adm5120.c
@@ -163,7 +163,7 @@ LED_ARRAY(wp54g) {
 	LED_INV(ADM5120_GPIO_P1L0, "lan2",	NULL ),
 };
 
-LED_ARRAY(unknown) {
+LED_ARRAY(generic) {
 #if defined(CONFIG_LEDS_ADM5120_DIAG)
 	LED_STD(ADM5120_GPIO_PIN0, "gpio0",	NULL ),
 	LED_STD(ADM5120_GPIO_PIN1, "gpio1",	NULL ),
@@ -198,7 +198,7 @@ LED_ARRAY(unknown) {
 }
 
 static struct mach_data machines[] __initdata = {
-	MACH_DATA(MACH_ADM5120_UNKNOWN, unknown),
+	MACH_DATA(MACH_ADM5120_GENERIC, generic),
 	MACH_DATA(MACH_ADM5120_P334WT,	p334wt),
 	MACH_DATA(MACH_ADM5120_WP54AG,	wp54g),
 	MACH_DATA(MACH_ADM5120_WP54G,	wp54g),
diff --git a/target/linux/adm5120-2.6/files/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120-2.6/files/drivers/mtd/maps/adm5120-flash.c
new file mode 100644
index 000000000..a60e6e54b
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/drivers/mtd/maps/adm5120-flash.c
@@ -0,0 +1,572 @@
+/*
+ *  $Id$
+ *
+ *  Platform driver for NOR flash devices on ADM5120 based boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This file was derived from: drivers/mtd/map/physmap.c
+ *	Copyright (C) 2003 MontaVista Software Inc.
+ *	Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_mpmc.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+#define DRV_NAME	"adm5120-flash"
+#define DRV_DESC	"ADM5120 flash MAP driver"
+#define MAX_PARSED_PARTS 8
+
+#define MAP_DBG(m, f, a...)	printk(KERN_DEBUG "%s: " f, (m->name) , ## a)
+#define MAP_ERR(m, f, a...)	printk(KERN_ERR "%s: " f, (m->name) , ## a)
+#define MAP_INFO(m, f, a...)	printk(KERN_INFO "%s: " f, (m->name) , ## a)
+
+struct adm5120_map_info {
+	struct map_info	map;
+	void 		(*switch_bank)(unsigned);
+	unsigned long	chip_size;
+};
+
+struct adm5120_flash_info {
+	struct mtd_info		*mtd;
+	struct resource		*res;
+	struct platform_device	*dev;
+	struct adm5120_map_info	amap;
+#ifdef CONFIG_MTD_PARTITIONS
+	int			nr_parts;
+	struct mtd_partition	*parts[MAX_PARSED_PARTS];
+#endif
+};
+
+struct flash_desc {
+	u32	phys;
+	u32	srs_shift;
+	u32	mpmc_reg;
+};
+
+/*
+ * Globals
+ */
+static DEFINE_SPINLOCK(adm5120_flash_spin);
+#define FLASH_LOCK()	spin_lock(&adm5120_flash_spin)
+#define FLASH_UNLOCK()	spin_unlock(&adm5120_flash_spin)
+
+static u32 flash_bankwidths[4] = { 1, 2, 4, 0 };
+
+static u32 flash_sizes[8] = {
+	0, 512*1024, 1024*1024, 2*1024*1024,
+	4*1024*1024, 0, 0, 0
+};
+
+static struct flash_desc flash_descs[2] = {
+	{
+		.phys		= ADM5120_SRAM0_BASE,
+		.mpmc_reg	= MPMC_REG_SC1,
+		.srs_shift	= MEMCTRL_SRS0_SHIFT,
+	}, {
+		.phys		= ADM5120_SRAM1_BASE,
+		.mpmc_reg	= MPMC_REG_SC0,
+		.srs_shift	= MEMCTRL_SRS1_SHIFT,
+	}
+};
+
+static const char *probe_types[] = {
+	"cfi_probe",
+	"jedec_probe",
+	"map_rom",
+	NULL
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *parse_types[] = {
+	"cmdlinepart",
+#ifdef CONFIG_MTD_REDBOOT_PARTS
+	"RedBoot",
+#endif
+#ifdef CONFIG_MTD_MYLOADER_PARTS
+	"MyLoader",
+#endif
+};
+#endif
+
+#define BANK_SIZE	(2<<20)
+#define BANK_SIZE_MAX	(4<<20)
+#define BANK_OFFS_MASK	(BANK_SIZE-1)
+#define BANK_START_MASK	(~BANK_OFFS_MASK)
+
+static inline struct adm5120_map_info *map_to_amap(struct map_info *map)
+{
+	return (struct adm5120_map_info *)map;
+}
+
+static void adm5120_flash_switchbank(struct map_info *map,
+		unsigned long ofs)
+{
+	struct adm5120_map_info *amap = map_to_amap(map);
+	unsigned bank;
+
+	if (amap->switch_bank == NULL)
+		return;
+
+	bank = (ofs & BANK_START_MASK) >> 21;
+	if (bank > 1)
+		BUG();
+
+	MAP_DBG(map, "ofs=%lu, switching to bank %u\n", ofs, bank);
+	amap->switch_bank(bank);
+}
+
+static map_word adm5120_flash_read(struct map_info *map, unsigned long ofs)
+{
+	struct adm5120_map_info *amap = map_to_amap(map);
+	map_word ret;
+
+	MAP_DBG(map, "reading from ofs %lu\n", ofs);
+
+	if (ofs >= amap->chip_size)
+		return map_word_ff(map);
+
+	FLASH_LOCK();
+	adm5120_flash_switchbank(map, ofs);
+	ret = inline_map_read(map, (ofs & BANK_OFFS_MASK));
+	FLASH_UNLOCK();
+
+	return ret;
+}
+
+static void adm5120_flash_write(struct map_info *map, const map_word datum,
+		unsigned long ofs)
+{
+	struct adm5120_map_info *amap = map_to_amap(map);
+
+	MAP_DBG(map,"writing to ofs %lu\n", ofs);
+
+	if (ofs > amap->chip_size)
+		return;
+
+	FLASH_LOCK();
+	adm5120_flash_switchbank(map, ofs);
+	inline_map_write(map, datum, (ofs & BANK_OFFS_MASK));
+	FLASH_UNLOCK();
+}
+
+static void adm5120_flash_copy_from(struct map_info *map, void *to,
+		unsigned long from, ssize_t len)
+{
+	struct adm5120_map_info *amap = map_to_amap(map);
+	char *p;
+	ssize_t t;
+
+	MAP_DBG(map, "copying %lu byte(s) from %lu to %lX\n",
+		(unsigned long)len, from, (unsigned long)to);
+
+	if (from > amap->chip_size)
+		return;
+
+	p = (char *)to;
+	while (len > 0) {
+		if (len > BANK_SIZE - (from & BANK_OFFS_MASK))
+			t = BANK_SIZE - (from & BANK_OFFS_MASK);
+		else
+			t = len;
+
+		MAP_DBG(map, "copying %lu byte(s) from %lu to %lX\n",
+			(unsigned long)t, (from & BANK_OFFS_MASK),
+			(unsigned long)p);
+
+		FLASH_LOCK();
+		adm5120_flash_switchbank(map, from);
+		inline_map_copy_from(map, to, (from & BANK_OFFS_MASK), t);
+		FLASH_UNLOCK();
+		p += t;
+		from += t;
+		len -= t;
+	}
+}
+
+static int adm5120_flash_initres(struct adm5120_flash_info *info)
+{
+	struct map_info *map = &info->amap.map;
+	int err = 0;
+
+	info->res = request_mem_region(map->phys, map->size, map->name);
+	if (info->res == NULL) {
+		MAP_ERR(map, "could not reserve memory region\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	map->virt = ioremap_nocache(map->phys, map->size);
+	if (map->virt == NULL) {
+		MAP_ERR(map, "failed to ioremap flash region\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+out:
+	return err;
+}
+
+#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
+#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
+#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_MPMC_BASE)+(r))
+#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_MPMC_BASE)+(r))=(v)
+
+static int adm5120_flash_initinfo(struct adm5120_flash_info *info,
+		struct platform_device *dev)
+{
+	struct map_info *map = &info->amap.map;
+	struct adm5120_flash_platform_data *pdata = dev->dev.platform_data;
+	struct flash_desc *fdesc;
+	u32 t;
+
+	map->name = dev->dev.bus_id;
+
+	if (dev->id > 1) {
+		MAP_ERR(map, "invalid flash id\n");
+		goto err_out;
+	}
+
+	fdesc = &flash_descs[dev->id];
+
+	/* get memory window size */
+	t = SWITCH_READ(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift;
+	t &= MEMCTRL_SRS_MASK;
+	info->amap.chip_size = flash_sizes[t];
+	if (info->amap.chip_size == 0) {
+		MAP_ERR(map, "invalid flash size detected\n");
+		goto err_out;
+	}
+
+	/* get flash bus width */
+	t = MPMC_READ(fdesc->mpmc_reg) & SC_MW_MASK;
+	map->bankwidth = flash_bankwidths[t];
+	if (map->bankwidth == 0) {
+		MAP_ERR(map, "invalid bus width detected\n");
+		goto err_out;
+	}
+
+	map->phys = fdesc->phys;
+	map->size = BANK_SIZE_MAX;
+
+	simple_map_init(map);
+	map->read = adm5120_flash_read;
+	map->write = adm5120_flash_write;
+	map->copy_from = adm5120_flash_copy_from;
+
+	if (pdata) {
+		map->set_vpp = pdata->set_vpp;
+		info->amap.switch_bank = pdata->switch_bank;
+	}
+
+	info->dev = dev;
+
+	MAP_INFO(map, "probing at 0x%lX, size:%ldKiB, width:%d bits\n",
+		(unsigned long)map->phys,
+		(unsigned long)info->amap.chip_size >> 10,
+		map->bankwidth*8);
+
+	return 0;
+
+err_out:
+	return -ENODEV;
+}
+
+static void adm5120_flash_initbanks(struct adm5120_flash_info *info)
+{
+	struct map_info *map = &info->amap.map;
+
+	if (info->mtd->size <= BANK_SIZE)
+		/* no bank switching needed */
+		return;
+
+	if (info->amap.switch_bank) {
+		info->amap.chip_size = info->mtd->size;
+		return;
+	}
+
+	MAP_ERR(map, "reduce visibility from %ldKiB to %ldKiB\n",
+		(unsigned long)map->size >> 10,
+		(unsigned long)info->mtd->size >> 10);
+
+	info->mtd->size = info->amap.chip_size;
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static int adm5120_flash_initparts(struct adm5120_flash_info *info)
+{
+	struct adm5120_flash_platform_data *pdata = info->dev->dev.platform_data;
+	struct map_info *map = &info->amap.map;
+	int num_parsers;
+	const char *parser[2];
+	int err = 0;
+	int nr_parts;
+	int i;
+
+	info->nr_parts = 0;
+
+	if (pdata == NULL)
+		goto out;
+
+	if (pdata->nr_parts) {
+		MAP_INFO(map, "adding static partitions\n");
+		err = add_mtd_partitions(info->mtd, pdata->parts,
+			pdata->nr_parts);
+		if (err == 0) {
+			info->nr_parts += pdata->nr_parts;
+			goto out;
+		}
+	}
+
+	num_parsers = ARRAY_SIZE(parse_types);
+	if (num_parsers > MAX_PARSED_PARTS)
+		num_parsers = MAX_PARSED_PARTS;
+
+	parser[1] = NULL;
+	for (i=0; i<num_parsers; i++) {
+		parser[0] = parse_types[i];
+
+		MAP_INFO(map, "parsing \"%s\" partitions\n",
+			parser[0]);
+		nr_parts = parse_mtd_partitions(info->mtd, parser,
+			&info->parts[i], 0);
+
+		if (nr_parts <= 0)
+			continue;
+
+		MAP_INFO(map, "adding \"%s\" partitions\n",
+			parser[0]);
+
+		err = add_mtd_partitions(info->mtd, info->parts[i], nr_parts);
+		if (err)
+			break;
+
+		info->nr_parts += nr_parts;
+	}
+out:
+	return err;
+}
+#else
+static int adm5120_flash_initparts(struct adm5120_flash_info *info)
+{
+	return 0;
+}
+#endif /* CONFIG_MTD_PARTITIONS */
+
+#ifdef CONFIG_MTD_PARTITIONS
+static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info)
+{
+	int i;
+
+	if (info->nr_parts) {
+		del_mtd_partitions(info->mtd);
+		for (i=0; i<MAX_PARSED_PARTS; i++)
+			if (info->parts[i] != NULL)
+				kfree(info->parts[i]);
+	} else {
+		del_mtd_device(info->mtd);
+	}
+}
+#else
+static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info)
+{
+	del_mtd_device(info->mtd);
+}
+#endif
+
+static int adm5120_flash_remove(struct platform_device *dev)
+{
+	struct adm5120_flash_info *info;
+
+	info = platform_get_drvdata(dev);
+	if (info == NULL)
+		return 0;
+
+	platform_set_drvdata(dev, NULL);
+
+	if (info->mtd != NULL) {
+		adm5120_flash_remove_mtd(info);
+		map_destroy(info->mtd);
+	}
+
+	if (info->amap.map.virt != NULL)
+		iounmap(info->amap.map.virt);
+
+	if (info->res != NULL) {
+		release_resource(info->res);
+		kfree(info->res);
+	}
+
+	return 0;
+}
+
+static int adm5120_flash_probe(struct platform_device *dev)
+{
+	struct adm5120_flash_info *info;
+	struct map_info *map;
+	const char **probe_type;
+	int err;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (info == NULL) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	platform_set_drvdata(dev, info);
+
+	err = adm5120_flash_initinfo(info, dev);
+	if (err)
+		goto err_out;
+
+	err = adm5120_flash_initres(info);
+	if (err)
+		goto err_out;
+
+	map = &info->amap.map;
+	for (probe_type = probe_types; info->mtd == NULL && *probe_type != NULL;
+		probe_type++)
+		info->mtd = do_map_probe(*probe_type, map);
+
+	if (info->mtd == NULL) {
+		MAP_ERR(map, "map_probe failed\n");
+		err = -ENXIO;
+		goto err_out;
+	}
+
+	adm5120_flash_initbanks(info);
+
+	if (info->mtd->size < info->amap.chip_size) {
+		/* readjust resources */
+		iounmap(map->virt);
+		release_resource(info->res);
+		kfree(info->res);
+
+		info->amap.chip_size = info->mtd->size;
+		map->size = info->mtd->size;
+		MAP_INFO(map, "reducing map size to %ldKiB\n",
+			(unsigned long)map->size >> 10);
+		err = adm5120_flash_initres(info);
+		if (err)
+			goto err_out;
+	}
+
+	MAP_INFO(map, "found at 0x%lX, size:%ldKiB, width:%d bits\n",
+		(unsigned long)map->phys, (unsigned long)map->size >> 10,
+		map->bankwidth*8);
+
+	info->mtd->owner = THIS_MODULE;
+
+	err = adm5120_flash_initparts(info);
+	if (err)
+		goto err_out;
+
+	if (info->nr_parts == 0) {
+		MAP_INFO(map, "no partitions available, registering whole flash\n");
+		add_mtd_device(info->mtd);
+	}
+
+	return 0;
+
+err_out:
+	adm5120_flash_remove(dev);
+	return err;
+}
+
+#ifdef CONFIG_PM
+static int adm5120_flash_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct adm5120_flash_info *info = platform_get_drvdata(dev);
+	int ret = 0;
+
+	if (info)
+		ret = info->mtd->suspend(info->mtd);
+
+	return ret;
+}
+
+static int adm5120_flash_resume(struct platform_device *dev)
+{
+	struct adm5120_flash_info *info = platform_get_drvdata(dev);
+
+	if (info)
+		info->mtd->resume(info->mtd);
+
+	return 0;
+}
+
+static void adm5120_flash_shutdown(struct platform_device *dev)
+{
+	struct adm5120_flash_info *info = platform_get_drvdata(dev);
+
+	if (info && info->mtd->suspend(info->mtd) == 0)
+		info->mtd->resume(info->mtd);
+}
+#endif
+
+static struct platform_driver adm5120_flash_driver = {
+	.probe		= adm5120_flash_probe,
+	.remove		= adm5120_flash_remove,
+#ifdef CONFIG_PM
+	.suspend	= adm5120_flash_suspend,
+	.resume		= adm5120_flash_resume,
+	.shutdown	= adm5120_flash_shutdown,
+#endif
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init adm5120_flash_init(void)
+{
+	int err;
+
+	err = platform_driver_register(&adm5120_flash_driver);
+
+	return err;
+}
+
+static void __exit adm5120_flash_exit(void)
+{
+	platform_driver_unregister(&adm5120_flash_driver);
+}
+
+module_init(adm5120_flash_init);
+module_exit(adm5120_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Gabor Juhos <juhosg@freemail.hu>");
+MODULE_DESCRIPTION(DRV_DESC);
diff --git a/target/linux/adm5120-2.6/files/drivers/mtd/myloader.c b/target/linux/adm5120-2.6/files/drivers/mtd/myloader.c
index ee916d780..222245cc9 100644
--- a/target/linux/adm5120-2.6/files/drivers/mtd/myloader.c
+++ b/target/linux/adm5120-2.6/files/drivers/mtd/myloader.c
@@ -1,4 +1,6 @@
 /*
+ *  $Id$
+ *
  *  Parse MyLoader-style flash partition tables and produce a Linux partition
  *  array to match.
  *
@@ -33,7 +35,8 @@
 #include <linux/mtd/partitions.h>
 
 #include <linux/byteorder/generic.h>
-#include <asm/mach-adm5120/myloader.h>
+
+#include <prom/myloader.h>
 
 #define NAME_LEN_MAX		20
 #define NAME_MYLOADER		"MyLoader"
@@ -68,12 +71,10 @@ int parse_myloader_partitions(struct mtd_info *master,
 
 	/* Partition Table is always located on the second erase block */
 	offset = blocklen;
-	printk(KERN_NOTICE "Searching for MyLoader partition table "
-			"in %s at offset 0x%lx\n", master->name, offset);
-
-	ret = master->read(master, offset, sizeof(*tab), &retlen,
-			(void *)tab);
+	printk(KERN_NOTICE "%s: searching for MyLoader partition table at "
+			"offset 0x%lx\n", master->name, offset);
 
+	ret = master->read(master, offset, sizeof(*tab), &retlen, (void *)tab);
 	if (ret)
 		goto out;
 
@@ -84,8 +85,8 @@ int parse_myloader_partitions(struct mtd_info *master,
 
 	/* Check for Partition Table magic number */
 	if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
-		printk(KERN_NOTICE "No MyLoader partition table detected "
-			"in %s\n", master->name);
+		printk(KERN_NOTICE "%s: no MyLoader partition table found\n",
+			master->name);
 		ret = 0;
 		goto out_free_buf;
 	}
@@ -103,7 +104,6 @@ int parse_myloader_partitions(struct mtd_info *master,
 		num_parts++;
 	}
 
-
 	mtd_parts = kzalloc((num_parts*sizeof(*mtd_part) + num_parts*NAME_LEN_MAX),
 			 GFP_KERNEL);
 
@@ -119,6 +119,7 @@ int parse_myloader_partitions(struct mtd_info *master,
 	mtd_part->name = names;
 	mtd_part->offset = 0;
 	mtd_part->size = blocklen;
+	mtd_part->mask_flags = MTD_WRITEABLE;
 	mtd_part++;
 	names += NAME_LEN_MAX;
 
@@ -126,6 +127,7 @@ int parse_myloader_partitions(struct mtd_info *master,
 	mtd_part->name = names;
 	mtd_part->offset = blocklen;
 	mtd_part->size = blocklen;
+	mtd_part->mask_flags = MTD_WRITEABLE;
 	mtd_part++;
 	names += NAME_LEN_MAX;
 
@@ -136,9 +138,9 @@ int parse_myloader_partitions(struct mtd_info *master,
 			continue;
 
 		sprintf(names, "partition%d", i);
-		mtd_part->name = names;
 		mtd_part->offset = le32_to_cpu(part->addr);
 		mtd_part->size = le32_to_cpu(part->size);
+		mtd_part->name = names;
 		mtd_part++;
 		names += NAME_LEN_MAX;
 	}
diff --git a/target/linux/adm5120-2.6/files/drivers/net/adm5120sw.c b/target/linux/adm5120-2.6/files/drivers/net/adm5120sw.c
index dfc030ea1..6c311bfde 100644
--- a/target/linux/adm5120-2.6/files/drivers/net/adm5120sw.c
+++ b/target/linux/adm5120-2.6/files/drivers/net/adm5120sw.c
@@ -40,9 +40,9 @@ static unsigned char vlan_matrix[SW_DEVS] = {
 	0x41, 0x42, 0x44, 0x48, 0x50, 0x60
 };
 
-/* default settings - unlimited TX and RX on all ports, default shaper mode */ 
+/* default settings - unlimited TX and RX on all ports, default shaper mode */
 static unsigned char bw_matrix[SW_DEVS] = {
-	0, 0, 0, 0, 0, 0	
+	0, 0, 0, 0, 0, 0
 };
 
 static int adm5120_nrdevs;
@@ -373,17 +373,17 @@ static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 			break;
 		case SIOCGETBW:
 			err = copy_to_user(rq->ifr_data, bw_matrix, sizeof(bw_matrix));
-			if (err) 
-				return -EFAULT; 
-			break; 
+			if (err)
+				return -EFAULT;
+			break;
 		case SIOCSETBW:
-			if (!capable(CAP_NET_ADMIN)) 
+			if (!capable(CAP_NET_ADMIN))
 				return -EPERM;
 			err = copy_from_user(bw_matrix, rq->ifr_data, sizeof(bw_matrix));
-			if (err) 
+			if (err)
 				return -EFAULT;
 			adm5120_set_bw(bw_matrix);
-			break; 
+			break;
 		default:
 			return -EOPNOTSUPP;
 	}
@@ -428,9 +428,7 @@ static int __init adm5120_sw_init(void)
 	if (err)
 		goto out;
 
-	adm5120_nrdevs = adm5120_board.iface_num;
-	if (adm5120_nrdevs > 5 && !adm5120_has_gmii())
-		adm5120_nrdevs = 5;
+	adm5120_nrdevs = adm5120_eth_num_ports;
 
 	adm5120_set_reg(ADM5120_CPUP_CONF,
 	    ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
@@ -483,12 +481,8 @@ static int __init adm5120_sw_init(void)
 		dev->tx_timeout = adm5120_tx_timeout;
 		dev->watchdog_timeo = ETH_TX_TIMEOUT;
 		dev->set_mac_address = adm5120_sw_set_mac_address;
-		/* HACK alert!!!  In the original admtek driver it is asumed
-		   that you can read the MAC addressess from flash, but edimax
-		   decided to leave that space intentionally blank...
-		 */
-		memcpy(dev->dev_addr, "\x00\x50\xfc\x11\x22\x01", 6);
-		dev->dev_addr[5] += i;
+
+		memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
 		adm5120_write_mac(dev);
 
 		if ((err = register_netdev(dev))) {
diff --git a/target/linux/adm5120-2.6/files/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120-2.6/files/drivers/usb/host/adm5120-hcd.c
index 87bfcc6c7..c8be7393f 100644
--- a/target/linux/adm5120-2.6/files/drivers/usb/host/adm5120-hcd.c
+++ b/target/linux/adm5120-2.6/files/drivers/usb/host/adm5120-hcd.c
@@ -18,6 +18,7 @@
 #include <linux/usb.h>
 #include <linux/platform_device.h>
 
+#include <asm/bootinfo.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
@@ -751,7 +752,7 @@ static int __init adm5120hcd_probe(struct platform_device *pdev)
                 err = -ENOMEM;
                 goto out_mem;
         }
-	
+
 	hcd = usb_create_hcd(&adm5120_hc_driver, &pdev->dev, pdev->dev.bus_id);
         if (!hcd)
                 goto out_mem;
@@ -821,22 +822,30 @@ static struct platform_driver adm5120hcd_driver = {
 	.probe =	adm5120hcd_probe,
 	.remove =	adm5120hcd_remove,
 	.driver	=	{
-		.name 	= "adm5120-hcd",
+		.name 	= "adm5120-usbc",
 		.owner 	= THIS_MODULE,
 	},
 };
 
 static int __init adm5120hcd_init(void)
 {
-	if (usb_disabled()) 
+	int ret;
+
+	if (usb_disabled()) {
+		printk(KERN_DEBUG PFX "USB support is disabled\n");
 		return -ENODEV;
-	if (!adm5120_board.has_usb) {
-		printk(KERN_DEBUG PFX "this board does not have USB\n");
+	}
+
+	if (mips_machgroup != MACH_GROUP_ADM5120) {
+		printk(KERN_DEBUG PFX "unsupported machine group\n");
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO PFX "registered\n");
-	return platform_driver_register(&adm5120hcd_driver);
+	ret = platform_driver_register(&adm5120hcd_driver);
+	if (ret == 0)
+		printk(KERN_INFO PFX "registered\n");
+
+	return ret;
 }
 
 static void __exit adm5120hcd_exit(void)
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_board.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_board.h
new file mode 100644
index 000000000..80ace7865
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_board.h
@@ -0,0 +1,49 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 board definitions
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_BOARD_H_
+#define _ADM5120_BOARD_H_
+
+#include <linux/init.h>
+#include <linux/list.h>
+
+#define ADM5120_BOARD_NAMELEN	64
+
+struct adm5120_board {
+	unsigned long		mach_type;
+	char			name[ADM5120_BOARD_NAMELEN];
+
+	void			(*board_setup)(void);
+	void			(*board_reset)(void);
+
+	unsigned int		num_eth_ports;
+	unsigned int		num_devices;
+	struct platform_device	**devices;
+
+	struct list_head	list;
+};
+
+extern void adm5120_board_register(struct adm5120_board *) __init;
+
+#endif /* _ADM5120_BOARD_H_ */
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h
index 5c6424418..009bf4a71 100644
--- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h
+++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h
@@ -1,13 +1,23 @@
 /*
- * $Id$
+ *  $Id$
  *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) Gabor Juhos <juhosg@freemail.hu>
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
  */
 
 #ifndef _ADM5120_INFO_H
@@ -15,27 +25,14 @@
 
 #include <linux/types.h>
 
-#define ADM5120_BOARD_NAMELEN	64
-
-struct adm5120_board {
-	char		name[ADM5120_BOARD_NAMELEN];
-	unsigned long	mach_type;
-	unsigned int	iface_num;	/* Number of Ethernet interfaces */
-	unsigned int	has_usb;	/* USB controller presence flag */
-	u32		mem_size;	/* onboard memory size */
-	u32		flash0_size;	/* Flash 0 size */
-};
-
-extern struct adm5120_board adm5120_board;
-
-extern unsigned int adm5120_boot_loader;
-#define BOOT_LOADER_UNKNOWN	0
-#define BOOT_LOADER_CFE		1
-#define BOOT_LOADER_UBOOT	2
-#define BOOT_LOADER_MYLOADER	3
-#define BOOT_LOADER_ROUTERBOOT	4
-#define BOOT_LOADER_BOOTBASE	5
-#define BOOT_LOADER_LAST	5
+extern unsigned int adm5120_prom_type;
+#define ADM5120_PROM_GENERIC	0
+#define ADM5120_PROM_CFE	1
+#define ADM5120_PROM_MYLOADER	2
+#define ADM5120_PROM_ROUTERBOOT	3
+#define ADM5120_PROM_BOOTBASE	4
+#define ADM5120_PROM_UBOOT	5
+#define ADM5120_PROM_LAST	5
 
 extern unsigned int adm5120_product_code;
 extern unsigned int adm5120_revision;
@@ -53,7 +50,22 @@ extern unsigned int adm5120_package;
 
 extern unsigned long adm5120_memsize;
 
-extern void adm5120_info_init(void);
+/*
+ * TODO:remove adm5120_eth* variables when the switch driver will be
+ * 	converted into a real platform driver
+ */
+extern unsigned int adm5120_eth_num_ports;
+extern unsigned char adm5120_eth_macs[6][6];
+
+extern void adm5120_mem_init(void) __init;
+extern void adm5120_time_init(void) __init;
+extern void adm5120_ndelay(u32 ns);
+
+extern void adm5120_restart(char *command);
+extern void adm5120_halt(void);
+extern void adm5120_power_off(void);
+
+extern void (*adm5120_board_reset)(void);
 
 static inline int adm5120_package_pqfp(void)
 {
@@ -75,14 +87,4 @@ static inline int adm5120_has_gmii(void)
 	return (adm5120_package == ADM5120_PACKAGE_BGA);
 }
 
-static inline char *adm5120_board_name(void)
-{
-	return adm5120_board.name;
-}
-
-static inline u32 adm5120_board_memsize(void)
-{
-	return adm5120_board.mem_size;
-}
-
 #endif /* _ADM5120_INFO_H */
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_intc.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_intc.h
index 1d16fdcda..58995fe55 100644
--- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_intc.h
+++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_intc.h
@@ -1,4 +1,6 @@
 /*
+ *  $Id$
+ *
  *  ADM5120 interrupt controller definitions
  *
  *  This header file defines the hardware registers of the ADM5120 SoC
@@ -22,6 +24,7 @@
  *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  *  Boston, MA  02110-1301, USA.
  */
+
 #ifndef _ADM5120_INTC_H_
 #define _ADM5120_INTC_H_
 
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_platform.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_platform.h
new file mode 100644
index 000000000..b9822983c
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_platform.h
@@ -0,0 +1,66 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific platform definitions
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_PLATFORM_H_
+#define _ADM5120_PLATFORM_H_
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+struct adm5120_flash_platform_data {
+	void			(*set_vpp)(struct map_info *, int);
+	void			(*switch_bank)(unsigned);
+	unsigned int		nr_parts;
+	struct mtd_partition	*parts;
+};
+
+struct adm5120_switch_platform_data {
+	/* TODO: not yet implemented */
+};
+
+struct adm5120_pci_irq {
+	u8	slot;
+	u8	func;
+	u8	pin;
+	unsigned irq;
+};
+
+struct adm5120_pci_platform_data {
+	unsigned int	nr_irqs;
+	struct adm5120_pci_irq	*irqs;
+};
+
+extern struct adm5120_flash_platform_data adm5120_flash0_data;
+extern struct adm5120_flash_platform_data adm5120_flash1_data;
+extern struct adm5120_pci_platform_data adm5120_pci_data;
+extern struct adm5120_switch_platform_data adm5120_switch_data;
+
+extern struct platform_device adm5120_flash0_device;
+extern struct platform_device adm5120_flash1_device;
+extern struct platform_device adm5120_usbc_device;
+extern struct platform_device adm5120_pci_device;
+extern struct platform_device adm5120_switch_device;
+
+#endif /* _ADM5120_PLATFORM_H_ */
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_uart.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_uart.h
new file mode 100755
index 000000000..54aacffa7
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_uart.h
@@ -0,0 +1,75 @@
+/*
+ *  ADM5120 UART definitions
+ *
+ *  This header file defines the hardware registers of the ADM5120 SoC
+ *  built-in UARTs.
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_UART_H_
+#define _ADM5120_UART_H_
+
+#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
+
+#define UART_REG_DATA	0x00
+#define UART_REG_RSR	0x04
+#define UART_REG_ECR	UART_REG_RSR
+#define UART_REG_LCRH	0x08
+#define UART_REG_LCRM	0x0C
+#define UART_REG_LCRL	0x10
+#define UART_REG_CTRL	0x14
+#define UART_REG_FLAG	0x18
+
+/* Receive Status Register bits */
+#define UART_RSR_FE	( 1 << 0 )
+#define UART_RSR_PE	( 1 << 1 )
+#define UART_RSR_BE	( 1 << 2 )
+#define UART_RSR_OE	( 1 << 3 )
+#define UART_RSR_ERR	( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE )
+
+#define UART_ECR_ALL	0xFF
+
+/* Line Control High register bits */
+#define UART_LCRH_BRK	( 1 << 0 ) /* send break */
+#define UART_LCRH_PEN	( 1 << 1 ) /* parity enable */
+#define UART_LCRH_EPS	( 1 << 2 ) /* even parity select */
+#define UART_LCRH_STP1	( 0 << 3 ) /* one stop bits select */
+#define UART_LCRH_STP2	( 1 << 3 ) /* two stop bits select */
+#define UART_LCRH_FEN	( 1 << 4 ) /* FIFO enable */
+
+#define UART_LCRH_WLEN5	( 0 << 5 )
+#define UART_LCRH_WLEN6	( 1 << 5 )
+#define UART_LCRH_WLEN7	( 2 << 5 )
+#define UART_LCRH_WLEN8	( 3 << 5 )
+
+/* Control register bits */
+#define UART_CTRL_EN	( 1 << 0 )
+
+/* Flag register bits */
+#define UART_FLAG_CTS	( 1 << 0 )
+#define UART_FLAG_DSR	( 1 << 1 )
+#define UART_FLAG_DCD	( 1 << 2 )
+#define UART_FLAG_BUSY	( 1 << 3 )
+#define UART_FLAG_RXFE	( 1 << 4 )
+#define UART_FLAG_TXFF	( 1 << 5 )
+#define UART_FLAG_RXFF	( 1 << 6 )
+#define UART_FLAG_TXFE	( 1 << 7 )
+
+#endif /* _ADM5120_UART_H_ */
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/cfe.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/cfe.h
new file mode 100644
index 000000000..128d0cab3
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/cfe.h
@@ -0,0 +1,31 @@
+/*
+ *  $Id$
+ *
+ *  Broadcom's CFE definitions
+ *
+ *  Copyright (C) 2006,2007 Gabor Juhos <juhosg@freemail.hu>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _PROM_CFE_H_
+#define _PROM_CFE_H_
+
+extern int cfe_present(void) __init;
+extern char *cfe_getenv(char *);
+
+#endif /*_PROM_CFE_H_*/
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/generic.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/generic.h
new file mode 100644
index 000000000..699e60cc8
--- /dev/null
+++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/generic.h
@@ -0,0 +1,31 @@
+/*
+ *  $Id$
+ *
+ *  Generic prom definitions
+ *
+ *  Copyright (C) 2006,2007 Gabor Juhos <juhosg@freemail.hu>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _PROM_GENERIC_H_
+#define _PROM_GENERIC_H_
+
+extern int generic_prom_present(void) __init;
+extern char *generic_prom_getenv(char *);
+
+#endif /*_PROM_GENERIC_H_*/
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/myloader.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/myloader.h
index 3c0c6021b..e034be8f3 100644
--- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/myloader.h
+++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/myloader.h
@@ -1,11 +1,25 @@
 /*
- *  Copyright (C) 2006,2007 Gabor Juhos
+ *  $Id$
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ *  Compex's MyLoader specific definitions
  *
+ *  Copyright (C) 2006,2007 Gabor Juhos <juhosg@freemail.hu>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
  */
 
 #ifndef _MYLOADER_H_
@@ -164,4 +178,14 @@ struct mylo_board_params {
 	struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
 };
 
+struct myloader_info {
+	u32	vid;
+	u32	did;
+	u32	svid;
+	u32	sdid;
+};
+
+extern struct myloader_info myloader_info;
+extern int myloader_present(void) __init;
+
 #endif /* _MYLOADER_H_*/
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/routerboot.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/routerboot.h
index 2a593e933..e37b066bd 100644
--- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/routerboot.h
+++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/routerboot.h
@@ -1,14 +1,25 @@
 /*
  *  $Id$
  *
+ *  Mikrotik's RouterBOOT definitions
+ *
  *  Copyright (C) 2007 OpenWrt.org
  *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
  *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
  */
 
 #ifndef _ROUTERBOOT_H
@@ -120,4 +131,7 @@ struct rb_hard_settings {
 #define RB_BOOT_PROTOCOL_BOOTP	0
 #define RB_BOOT_PROTOCOL_DHCP	1
 
+extern int routerboot_present(void) __init;
+extern char *routerboot_get_boardname(void);
+
 #endif /* _ROUTERBOOT_H */
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/zynos.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/zynos.h
index ba372d3d3..d2aaae048 100644
--- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/zynos.h
+++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/zynos.h
@@ -1,14 +1,25 @@
 /*
  *  $Id$
  *
+ *  ZyNOS (ZyXEL's Networking OS) definitions
+ *
  *  Copyright (C) 2007 OpenWrt.org
  *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
  *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
  */
 
 #ifndef _ZYNOS_H
@@ -75,4 +86,13 @@ struct zynos_board_info {
 #define ZYNOS_MAGIC_DBGAREA1	0x48646267	/* "Hdbg" */
 #define ZYNOS_MAGIC_DBGAREA2	0x61726561	/* "area" */
 
+struct bootbase_info {
+	u16		vendor_id;
+	u16		board_id;
+	u8		mac[6];
+};
+
+extern struct bootbase_info bootbase_info;
+extern int bootbase_present(void) __init;
+
 #endif /* _ZYNOS_H */
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch b/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
index da601b919..71db5fd86 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
@@ -1,14 +1,15 @@
-Index: linux-2.6.22-rc6/arch/mips/Kconfig
+Index: linux-2.6.22/arch/mips/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/Kconfig
-+++ linux-2.6.22-rc6/arch/mips/Kconfig
-@@ -15,6 +15,17 @@ choice
+--- linux-2.6.22.orig/arch/mips/Kconfig
++++ linux-2.6.22/arch/mips/Kconfig
+@@ -15,6 +15,18 @@ choice
  	prompt "System type"
  	default SGI_IP22
  
 +config MIPS_ADM5120
 +	bool "Support for ADM5120 SoC"
 +	select SYS_HAS_CPU_MIPS32_R1
++	select SYS_HAS_EARLY_PRINTK
 +	select DMA_NONCOHERENT
 +	select HW_HAS_PCI
 +	select IRQ_CPU
@@ -20,7 +21,7 @@ Index: linux-2.6.22-rc6/arch/mips/Kconfig
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  
-@@ -658,6 +669,7 @@ config TOSHIBA_RBTX4938
+@@ -658,6 +670,7 @@ config TOSHIBA_RBTX4938
  
  endchoice
  
@@ -28,18 +29,20 @@ Index: linux-2.6.22-rc6/arch/mips/Kconfig
  source "arch/mips/au1000/Kconfig"
  source "arch/mips/ddb5xxx/Kconfig"
  source "arch/mips/gt64120/ev64120/Kconfig"
-Index: linux-2.6.22-rc6/arch/mips/Makefile
+Index: linux-2.6.22/arch/mips/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/Makefile
-+++ linux-2.6.22-rc6/arch/mips/Makefile
-@@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
+--- linux-2.6.22.orig/arch/mips/Makefile
++++ linux-2.6.22/arch/mips/Makefile
+@@ -165,6 +165,16 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #
 +# ADMtek 5120
 +#
 +
++libs-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/prom/
 +core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/
++core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/boards/
 +cflags-$(CONFIG_MIPS_ADM5120)	+= -Iinclude/asm-mips/mach-adm5120
 +load-$(CONFIG_MIPS_ADM5120)	+= 0xffffffff80001000
 +
@@ -47,10 +50,10 @@ Index: linux-2.6.22-rc6/arch/mips/Makefile
  # Common Alchemy Au1x00 stuff
  #
  core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
-Index: linux-2.6.22-rc6/include/asm-mips/bootinfo.h
+Index: linux-2.6.22/include/asm-mips/bootinfo.h
 ===================================================================
---- linux-2.6.22-rc6.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.22-rc6/include/asm-mips/bootinfo.h
+--- linux-2.6.22.orig/include/asm-mips/bootinfo.h
++++ linux-2.6.22/include/asm-mips/bootinfo.h
 @@ -213,6 +213,57 @@
  #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
  #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
@@ -59,7 +62,7 @@ Index: linux-2.6.22-rc6/include/asm-mips/bootinfo.h
 + * Valid machtype for group ADMtek ADM5120
 + */
 +#define MACH_GROUP_ADM5120	26
-+#define MACH_ADM5120_UNKNOWN	0	/* Unknown board */
++#define MACH_ADM5120_GENERIC	0	/* Generic board */
 +#define MACH_ADM5120_WP54G_WRT	1	/* Compex WP54G-WRT */
 +#define MACH_ADM5120_WP54G	2	/* Compex WP54G */
 +#define MACH_ADM5120_WP54AG	3	/* Compex WP54AG */
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch
index 355c126c9..b84a62c49 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch
@@ -1,27 +1,26 @@
-Index: linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
+Index: linux-2.6.22/drivers/mtd/maps/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
-@@ -620,5 +620,10 @@ config MTD_PLATRAM
+--- linux-2.6.22.orig/drivers/mtd/maps/Kconfig
++++ linux-2.6.22/drivers/mtd/maps/Kconfig
+@@ -620,5 +620,9 @@ config MTD_PLATRAM
  
  	  This selection automatically selects the map_ram driver.
  
 +config MTD_ADM5120
-+	tristate "Map driver for ADMtek ADM5120 boards"
++	tristate "Map driver for ADM5120 based boards"
 +	depends on MIPS_ADM5120
-+	select MTD_CFI_AMDSTD
 +
  endmenu
  
-Index: linux-2.6.22-rc6/drivers/mtd/maps/Makefile
+Index: linux-2.6.22/drivers/mtd/maps/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/maps/Makefile
+--- linux-2.6.22.orig/drivers/mtd/maps/Makefile
++++ linux-2.6.22/drivers/mtd/maps/Makefile
 @@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
  obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
  obj-$(CONFIG_MTD_PCI)		+= pci.o
  obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120)      	+= adm5120_mtd.o
++obj-$(CONFIG_MTD_ADM5120)      	+= adm5120-flash.o
  obj-$(CONFIG_MTD_LASAT)		+= lasat.o
  obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
  obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch
index 9dde78250..83c1ff942 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/net/Kconfig
+Index: linux-2.6.22/drivers/net/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/net/Kconfig
-+++ linux-2.6.22-rc6/drivers/net/Kconfig
+--- linux-2.6.22.orig/drivers/net/Kconfig
++++ linux-2.6.22/drivers/net/Kconfig
 @@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
@@ -13,10 +13,10 @@ Index: linux-2.6.22-rc6/drivers/net/Kconfig
  config NET_SB1250_MAC
  	tristate "SB1250 Ethernet support"
  	depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
-Index: linux-2.6.22-rc6/drivers/net/Makefile
+Index: linux-2.6.22/drivers/net/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/net/Makefile
-+++ linux-2.6.22-rc6/drivers/net/Makefile
+--- linux-2.6.22.orig/drivers/net/Makefile
++++ linux-2.6.22/drivers/net/Makefile
 @@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch
index eb78e0357..089221eb4 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/serial/Makefile
+Index: linux-2.6.22/drivers/serial/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/serial/Makefile
-+++ linux-2.6.22-rc6/drivers/serial/Makefile
+--- linux-2.6.22.orig/drivers/serial/Makefile
++++ linux-2.6.22/drivers/serial/Makefile
 @@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) 
  obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
  obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
@@ -10,10 +10,10 @@ Index: linux-2.6.22-rc6/drivers/serial/Makefile
  obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
  obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
  obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-Index: linux-2.6.22-rc6/include/linux/serial_core.h
+Index: linux-2.6.22/include/linux/serial_core.h
 ===================================================================
---- linux-2.6.22-rc6.orig/include/linux/serial_core.h
-+++ linux-2.6.22-rc6/include/linux/serial_core.h
+--- linux-2.6.22.orig/include/linux/serial_core.h
++++ linux-2.6.22/include/linux/serial_core.h
 @@ -143,6 +143,9 @@
  #define PORT_KS8695	76
  
@@ -24,10 +24,10 @@ Index: linux-2.6.22-rc6/include/linux/serial_core.h
  #ifdef __KERNEL__
  
  #include <linux/compiler.h>
-Index: linux-2.6.22-rc6/drivers/serial/Kconfig
+Index: linux-2.6.22/drivers/serial/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/serial/Kconfig
-+++ linux-2.6.22-rc6/drivers/serial/Kconfig
+--- linux-2.6.22.orig/drivers/serial/Kconfig
++++ linux-2.6.22/drivers/serial/Kconfig
 @@ -270,6 +270,22 @@ config SERIAL_8250_RM9K
  
  comment "Non-8250 serial port support"
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch
index c862f906e..06734a172 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/usb/core/hub.c
+Index: linux-2.6.22/drivers/usb/core/hub.c
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/core/hub.c
-+++ linux-2.6.22-rc6/drivers/usb/core/hub.c
+--- linux-2.6.22.orig/drivers/usb/core/hub.c
++++ linux-2.6.22/drivers/usb/core/hub.c
 @@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb
  			: (USB_ENDPOINT_XFER_BULK << 11);
  	if (usb_pipein (pipe))
@@ -182,21 +182,21 @@ Index: linux-2.6.22-rc6/drivers/usb/core/hub.c
  re_enumerate:
  	hub_port_logical_disconnect(parent_hub, port1);
  	return -ENODEV;
-Index: linux-2.6.22-rc6/drivers/usb/host/Kconfig
+Index: linux-2.6.22/drivers/usb/host/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.22-rc6/drivers/usb/host/Kconfig
-@@ -224,3 +224,6 @@ config USB_SL811_CS
+--- linux-2.6.22.orig/drivers/usb/host/Kconfig
++++ linux-2.6.22/drivers/usb/host/Kconfig
+@@ -237,3 +237,6 @@ config USB_SL811_CS
  	  To compile this driver as a module, choose M here: the
  	  module will be called "sl811_cs".
  
 +config USB_ADM5120_HCD
 +	tristate "ADM5120 HCD support"
 +	depends on USB && MIPS_ADM5120
-Index: linux-2.6.22-rc6/drivers/usb/host/Makefile
+Index: linux-2.6.22/drivers/usb/host/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/host/Makefile
-+++ linux-2.6.22-rc6/drivers/usb/host/Makefile
+--- linux-2.6.22.orig/drivers/usb/host/Makefile
++++ linux-2.6.22/drivers/usb/host/Makefile
 @@ -8,6 +8,7 @@ endif
  
  obj-$(CONFIG_PCI)		+= pci-quirks.o
@@ -205,10 +205,10 @@ Index: linux-2.6.22-rc6/drivers/usb/host/Makefile
  obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
  obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
  obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
-Index: linux-2.6.22-rc6/drivers/usb/Kconfig
+Index: linux-2.6.22/drivers/usb/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/Kconfig
-+++ linux-2.6.22-rc6/drivers/usb/Kconfig
+--- linux-2.6.22.orig/drivers/usb/Kconfig
++++ linux-2.6.22/drivers/usb/Kconfig
 @@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig"
  
  source "drivers/usb/image/Kconfig"
@@ -218,10 +218,10 @@ Index: linux-2.6.22-rc6/drivers/usb/Kconfig
  comment "USB port drivers"
  	depends on USB
  
-Index: linux-2.6.22-rc6/drivers/usb/Makefile
+Index: linux-2.6.22/drivers/usb/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/Makefile
-+++ linux-2.6.22-rc6/drivers/usb/Makefile
+--- linux-2.6.22.orig/drivers/usb/Makefile
++++ linux-2.6.22/drivers/usb/Makefile
 @@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
  obj-$(CONFIG_USB_SL811_HCD)	+= host/
  obj-$(CONFIG_USB_U132_HCD)	+= host/
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch b/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch
index 91ca638de..c7c65613d 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/leds/Kconfig
+Index: linux-2.6.22/drivers/leds/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/leds/Kconfig
-+++ linux-2.6.22-rc6/drivers/leds/Kconfig
+--- linux-2.6.22.orig/drivers/leds/Kconfig
++++ linux-2.6.22/drivers/leds/Kconfig
 @@ -20,6 +20,27 @@ config LEDS_CLASS
  
  comment "LED drivers"
@@ -30,10 +30,10 @@ Index: linux-2.6.22-rc6/drivers/leds/Kconfig
  config LEDS_CORGI
  	tristate "LED Support for the Sharp SL-C7x0 series"
  	depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.22-rc6/drivers/leds/Makefile
+Index: linux-2.6.22/drivers/leds/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/leds/Makefile
-+++ linux-2.6.22-rc6/drivers/leds/Makefile
+--- linux-2.6.22.orig/drivers/leds/Makefile
++++ linux-2.6.22/drivers/leds/Makefile
 @@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
  obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
  
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch
index 18839cf36..3fe345e53 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch
@@ -1,17 +1,17 @@
-Index: linux-2.6.22-rc6/arch/mips/pci/Makefile
+Index: linux-2.6.22/arch/mips/pci/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/pci/Makefile
-+++ linux-2.6.22-rc6/arch/mips/pci/Makefile
+--- linux-2.6.22.orig/arch/mips/pci/Makefile
++++ linux-2.6.22/arch/mips/pci/Makefile
 @@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
  obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
  obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 +obj-$(CONFIG_PCI_ADM5120)	+= fixup-adm5120.o ops-adm5120.o pci-adm5120.o
-Index: linux-2.6.22-rc6/include/linux/pci_ids.h
+Index: linux-2.6.22/include/linux/pci_ids.h
 ===================================================================
---- linux-2.6.22-rc6.orig/include/linux/pci_ids.h
-+++ linux-2.6.22-rc6/include/linux/pci_ids.h
-@@ -1712,6 +1712,9 @@
+--- linux-2.6.22.orig/include/linux/pci_ids.h
++++ linux-2.6.22/include/linux/pci_ids.h
+@@ -1713,6 +1713,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
  
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_hardware_swab.patch b/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_hardware_swab.patch
deleted file mode 100644
index c0fd645b5..000000000
--- a/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_hardware_swab.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-Index: linux-2.6.22-rc6/include/asm-mips/byteorder.h
-===================================================================
---- linux-2.6.22-rc6.orig/include/asm-mips/byteorder.h
-+++ linux-2.6.22-rc6/include/asm-mips/byteorder.h
-@@ -58,6 +58,35 @@ static __inline__ __attribute_const__ __
- 
- #endif /* CONFIG_CPU_MIPSR2 */
- 
-+#ifdef CONFIG_ADM5120_HARDWARE_SWAB
-+
-+static __inline__ __attribute_const__ __u16 ___adm5120__swab16(__u16 x)
-+{
-+	__asm__ (
-+	"	sh	%2, 0xCA(%1)			\n"
-+	"	lhu	%0, 0xCC(%1)			\n"
-+	: "=r" (x)
-+	: "r" (0xB2000000), "r" (x));
-+
-+	return x;
-+}
-+
-+static __inline__ __attribute_const__ __u32 ___adm5120__swab32(__u32 x)
-+{
-+	__asm__ (
-+	"	sw	%2, 0xC8(%1)			\n"
-+	"	lw	%0, 0xCC(%1)			\n"
-+	: "=r" (x)
-+	: "r" (0xB2000000), "r" (x));
-+
-+	return x;
-+}
-+
-+#define __arch__swab16(x)	___adm5120__swab16(x)
-+#define __arch__swab32(x)	___adm5120__swab32(x)
-+
-+#endif /* CONFIG_ADM5120_HARDWARE_SWAB */
-+
- #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
- #  define __BYTEORDER_HAS_U64__
- #  define __SWAB_64_THRU_32__
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch
index 2b4381cd9..6e6d748a8 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/mtd/Kconfig
+Index: linux-2.6.22/drivers/mtd/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/Kconfig
+--- linux-2.6.22.orig/drivers/mtd/Kconfig
++++ linux-2.6.22/drivers/mtd/Kconfig
 @@ -155,6 +155,22 @@ config MTD_AFS_PARTS
  	  for your particular device. It won't happen automatically. The
  	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
@@ -25,10 +25,10 @@ Index: linux-2.6.22-rc6/drivers/mtd/Kconfig
  comment "User Modules And Translation Layers"
  
  config MTD_CHAR
-Index: linux-2.6.22-rc6/drivers/mtd/Makefile
+Index: linux-2.6.22/drivers/mtd/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/Makefile
+--- linux-2.6.22.orig/drivers/mtd/Makefile
++++ linux-2.6.22/drivers/mtd/Makefile
 @@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
  obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch b/target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch
index 5740d4ac6..b68eade91 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
+Index: linux-2.6.22/drivers/mtd/chips/cfi_cmdset_0002.c
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.6.22.orig/drivers/mtd/chips/cfi_cmdset_0002.c
++++ linux-2.6.22/drivers/mtd/chips/cfi_cmdset_0002.c
 @@ -47,12 +47,19 @@
  #define MANUFACTURER_AMD	0x0001
  #define MANUFACTURER_ATMEL	0x001F
@@ -74,10 +74,10 @@ Index: linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
  	{ 0, 0, NULL, NULL }
  };
  static struct cfi_fixup jedec_fixup_table[] = {
-Index: linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
+Index: linux-2.6.22/drivers/mtd/chips/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
+--- linux-2.6.22.orig/drivers/mtd/chips/Kconfig
++++ linux-2.6.22/drivers/mtd/chips/Kconfig
 @@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
  	  provides support for one of those command sets, used on chips
  	  including the AMD Am29LV320.
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/102-jedec-pmc-39lvxxx-chips.patch b/target/linux/adm5120-2.6/patches-2.6.22/102-jedec-pmc-39lvxxx-chips.patch
new file mode 100644
index 000000000..fa9d35dd1
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches-2.6.22/102-jedec-pmc-39lvxxx-chips.patch
@@ -0,0 +1,74 @@
+Index: linux-2.6.22/drivers/mtd/chips/jedec_probe.c
+===================================================================
+--- linux-2.6.22.orig/drivers/mtd/chips/jedec_probe.c
++++ linux-2.6.22/drivers/mtd/chips/jedec_probe.c
+@@ -121,6 +121,10 @@
+ #define UPD29F064115	0x221C
+ 
+ /* PMC */
++#define PM39LV512	0x001B
++#define PM39LV010	0x001C
++#define PM39LV020	0x003D
++#define PM39LV040	0x003E
+ #define PM49FL002	0x006D
+ #define PM49FL004	0x006E
+ #define PM49FL008	0x006A
+@@ -1246,6 +1250,58 @@ static const struct amd_flash_info jedec
+ 			ERASEINFO(0x02000,2),
+ 			ERASEINFO(0x04000,1),
+ 		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV512,
++		.name		= "PMC Pm39LV512",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_64KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,16),
++		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV010,
++		.name		= "PMC Pm39LV010",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_128KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,32),
++		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV020,
++		.name		= "PMC Pm39LV020",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_256KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,64),
++		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV040,
++		.name		= "PMC Pm39LV040",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_512KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,128),
++		}
+ 	}, {
+ 		.mfr_id		= MANUFACTURER_PMC,
+ 		.dev_id		= PM49FL002,
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch
index 47378e5a9..de3ffa078 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/arch/mips/kernel/head.S
+Index: linux-2.6.22/arch/mips/kernel/head.S
 ===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/kernel/head.S
-+++ linux-2.6.22-rc6/arch/mips/kernel/head.S
+--- linux-2.6.22.orig/arch/mips/kernel/head.S
++++ linux-2.6.22/arch/mips/kernel/head.S
 @@ -129,14 +129,19 @@
  #endif
  	.endm
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch b/target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch
index fb503c5dc..de96babbe 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
+Index: linux-2.6.22/drivers/mtd/nand/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/nand/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
+--- linux-2.6.22.orig/drivers/mtd/nand/Kconfig
++++ linux-2.6.22/drivers/mtd/nand/Kconfig
 @@ -81,6 +81,12 @@ config MTD_NAND_TS7250
  	help
  	  Support for NAND flash on Technologic Systems TS-7250 platform.
@@ -15,10 +15,10 @@ Index: linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
  config MTD_NAND_IDS
  	tristate
  
-Index: linux-2.6.22-rc6/drivers/mtd/nand/Makefile
+Index: linux-2.6.22/drivers/mtd/nand/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/nand/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/nand/Makefile
+--- linux-2.6.22.orig/drivers/mtd/nand/Makefile
++++ linux-2.6.22/drivers/mtd/nand/Makefile
 @@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nan
  obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
  obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
diff --git a/target/linux/adm5120eb-2.6/Makefile b/target/linux/adm5120eb-2.6/Makefile
index 8b02fc86e..832d26923 100644
--- a/target/linux/adm5120eb-2.6/Makefile
+++ b/target/linux/adm5120eb-2.6/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 ARCH:=mips
 BOARD:=adm5120eb
 BOARDNAME:=ADM5120 (Big Endian)
-FEATURES:=squashfs pci usb
+FEATURES:=squashfs pci usb broken
 
 LINUX_VERSION:=2.6.22.1