ar71xx: preliminary support for the TL-WR1043ND

Adds board support for the TP-Link TL-WR1043ND Based on the Atheros AP81 platform.
Presently the RTL8366RB switch support is missing due to no driver.
The ethernet works with 5 ports@1Gbit but is missing vlan support.

Hope Ive done this right, First time submiting a patch.

Signed-off-by: Andrew Tarabaras <andrew@advancedtechnologies.com.au>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18696 3c298f89-4303-0410-b956-a3cf2f4a3e73

9 files changed, 163 insertions, 0 deletions

diff --git a/target/linux/ar71xx/config-2.6.30 b/target/linux/ar71xx/config-2.6.30
index 3cedfdc46..914c2655a 100644
--- a/target/linux/ar71xx/config-2.6.30
+++ b/target/linux/ar71xx/config-2.6.30
@@ -14,6 +14,7 @@ CONFIG_AR71XX_MACH_PB42=y
 CONFIG_AR71XX_MACH_PB44=y
 CONFIG_AR71XX_MACH_RB_4XX=y
 CONFIG_AR71XX_MACH_TEW_632BRP=y
+CONFIG_AR71XX_MACH_TL_WR1043ND=y
 CONFIG_AR71XX_MACH_TL_WR741ND=y
 CONFIG_AR71XX_MACH_TL_WR941ND=y
 CONFIG_AR71XX_MACH_UBNT=y
diff --git a/target/linux/ar71xx/config-2.6.31 b/target/linux/ar71xx/config-2.6.31
index 0615a50f4..fa9f5dd8a 100644
--- a/target/linux/ar71xx/config-2.6.31
+++ b/target/linux/ar71xx/config-2.6.31
@@ -17,6 +17,7 @@ CONFIG_AR71XX_MACH_RB_4XX=y
 CONFIG_AR71XX_MACH_TEW_632BRP=y
 CONFIG_AR71XX_MACH_TL_WR741ND=y
 CONFIG_AR71XX_MACH_TL_WR941ND=y
+CONFIG_AR71XX_MACH_TL_WR1043ND=y
 CONFIG_AR71XX_MACH_UBNT=y
 CONFIG_AR71XX_MACH_WNDR3700=y
 CONFIG_AR71XX_MACH_WNR2000=y
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
index c68115bf5..c06038cad 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
@@ -71,6 +71,10 @@ config AR71XX_MACH_TL_WR941ND
 	bool "TP-LINK TL-WR941ND support"
 	default y
 
+config AR71XX_MACH_TL_WR1043ND
+	bool "TP-LINK TL-WR1043ND support"
+	default y
+
 config AR71XX_MACH_TEW_632BRP
 	bool "TRENDnet TEW-632BRP support"
 	default y
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
index 8e37c0590..a7871a22a 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_AR71XX_MACH_RB_4XX)	+= mach-rb-4xx.o
 obj-$(CONFIG_AR71XX_MACH_TEW_632BRP)	+= mach-tew-632brp.o
 obj-$(CONFIG_AR71XX_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
 obj-$(CONFIG_AR71XX_MACH_TL_WR941ND)	+= mach-tl-wr941nd.o
+obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND)	+= mach-tl-wr1043nd.o
 obj-$(CONFIG_AR71XX_MACH_UBNT)		+= mach-ubnt.o
 obj-$(CONFIG_AR71XX_MACH_WNDR3700)	+= mach-wndr3700.o
 obj-$(CONFIG_AR71XX_MACH_WNR2000)	+= mach-wnr2000.o
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
new file mode 100644
index 000000000..e67282e6d
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
@@ -0,0 +1,136 @@
+/*
+ *  TP-LINK TL-WR1043ND board support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/input.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "devices.h"
+
+#define TL_WR1043ND_GPIO_LED_SYSTEM     2
+#define TL_WR1043ND_GPIO_LED_QSS        5
+
+#define TL_WR1043ND_GPIO_BTN_RESET      3
+#define TL_WR1043ND_GPIO_BTN_QSS        7
+
+#define TL_WR1043ND_BUTTONS_POLL_INTERVAL     20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wr1043nd_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x140000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x160000,
+		.size		= 0x690000,
+	} , {
+		.name		= "art",
+		.offset		= 0x7f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",    
+		.offset		= 0x020000,
+		.size		= 0x7d0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wr1043nd_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = tl_wr1043nd_partitions,
+        .nr_parts       = ARRAY_SIZE(tl_wr1043nd_partitions),
+#endif
+};
+
+static struct spi_board_info tl_wr1043nd_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "m25p80",
+		.platform_data  = &tl_wr1043nd_flash_data,
+	}
+};
+
+static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
+	{
+		.name		= "tl-wr1043nd:green:system",
+		.gpio		= TL_WR1043ND_GPIO_LED_SYSTEM,
+		.active_low	= 1,
+	}, {
+		.name		= "tl-wr1043nd:red:qss",
+		.gpio		= TL_WR1043ND_GPIO_LED_QSS,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.threshold	= 5,
+		.gpio		= TL_WR1043ND_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "qss",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.threshold	= 5,
+		.gpio		= TL_WR1043ND_GPIO_BTN_QSS,
+		.active_low	= 1,
+	}
+};
+
+static void __init tl_wr1043nd_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+	ar71xx_set_mac_base(mac);
+
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.phy_mask = 0x0;
+	ar71xx_eth0_data.speed = SPEED_1000;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	
+	ar71xx_add_device_eth(0);
+	
+	ar71xx_add_device_usb();
+	
+	ar71xx_add_device_spi(NULL, tl_wr1043nd_spi_info,
+					ARRAY_SIZE(tl_wr1043nd_spi_info));
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
+					tl_wr1043nd_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
+					tl_wr1043nd_gpio_buttons);
+	ar91xx_add_device_wmac();
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TP-LINK TL-WR1043ND", tl_wr1043nd_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c b/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c
index cc0d5aeb0..b0a51cfb5 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c
@@ -71,6 +71,9 @@ static struct board_rec boards[] __initdata = {
 		.name		= "TL-WR941ND",
 		.mach_type	= AR71XX_MACH_TL_WR941ND,
 	}, {
+		.name		= "TL-WR1043ND",
+		.mach_type	= AR71XX_MACH_TL_WR1043ND,
+	}, {
 		.name		= "UBNT-RS",
 		.mach_type	= AR71XX_MACH_UBNT_RS,
 	}, {
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h
index 7f61c1440..575d1819c 100644
--- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h
+++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h
@@ -139,6 +139,7 @@ enum ar71xx_mach_type {
 	AR71XX_MACH_TEW_632BRP,	/* TRENDnet TEW-632BRP */
 	AR71XX_MACH_TL_WR741ND,	/* TP-LINK TL-WR741ND */
 	AR71XX_MACH_TL_WR941ND,	/* TP-LINK TL-WR941ND */
+	AR71XX_MACH_TL_WR1043ND,/* TP-LINK TL-WR1041ND */
 	AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
 	AR71XX_MACH_UBNT_LSX,	/* Ubiquiti LSX */
 	AR71XX_MACH_UBNT_RS,	/* Ubiquiti RouterStation */
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index da2f8fd50..6a04bf24f 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -474,6 +474,10 @@ define Image/Build/Profile/TLWR941NDV2
 	$(call Image/Build/Template/TPLINK/$(1),tl-wr941ndv2,board=TL-WR941ND,TL-WR941NDv2)
 endef
 
+define Image/Build/Profile/TLWR1043NDV1
+	$(call Image/Build/Template/TPLINK/$(1),tl-wr1043ndv1,board=TL-WR1043ND,TL-WR1043NDv1)
+endef
+
 define Image/Build/Profile/WNDR3700
 	$(call Image/Build/Template/WNDR3700/$(1),wndr3700,board=WNDR3700)
 endef
@@ -503,6 +507,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/TLWR841NDV3,$(1))
 	$(call Image/Build/Profile/TLWR841NDV5,$(1))
 	$(call Image/Build/Profile/TLWR941NDV2,$(1))
+	$(call Image/Build/Profile/TLWR1043NDV1,$(1))
 	$(call Image/Build/Profile/UBNT,$(1))
 	$(call Image/Build/Profile/WP543,$(1))
 	$(call Image/Build/Profile/WNDR3700,$(1))
diff --git a/target/linux/ar71xx/profiles/tp-link.mk b/target/linux/ar71xx/profiles/tp-link.mk
index ab5ed54ca..d62ab8a7c 100644
--- a/target/linux/ar71xx/profiles/tp-link.mk
+++ b/target/linux/ar71xx/profiles/tp-link.mk
@@ -47,3 +47,14 @@ define Profile/TLWR941NDV2/Description
 endef
 
 $(eval $(call Profile,TLWR941NDV2))
+
+define Profile/TLWR1043NDV1
+	NAME:=TP-LINK TL-WR1043ND v1
+	PACKAGES:=kmod-ath9k hostapd-mini
+endef
+
+define Profile/TLWR1043NDV1/Description
+	Package set optimized for the TP-LINK TL-WR1043ND v1.
+endef
+
+$(eval $(call Profile,TLWR1043NDV1))