prepare 2.6.24 on ixp4xx

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10438 3c298f89-4303-0410-b956-a3cf2f4a3e73

35 files changed, 7945 insertions, 0 deletions

diff --git a/target/linux/ixp4xx/config-default b/target/linux/ixp4xx/config-default
index 9673dc75b..f9cfe5323 100644
--- a/target/linux/ixp4xx/config-default
+++ b/target/linux/ixp4xx/config-default
@@ -353,6 +353,7 @@ CONFIG_PPP_MPPE=m
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_DEBUG is not set
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 CONFIG_RTC_DRV_DS1672=y
 # CONFIG_RTC_DRV_DS1742 is not set
@@ -397,6 +398,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1337 is not set
@@ -404,10 +406,13 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_SENSORS_DS1621 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
diff --git a/target/linux/ixp4xx/patches-2.6.24/016-dsmg600_auto_power_on.patch b/target/linux/ixp4xx/patches-2.6.24/016-dsmg600_auto_power_on.patch
new file mode 100644
index 000000000..2a1f2415f
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/016-dsmg600_auto_power_on.patch
@@ -0,0 +1,111 @@
+Upgrade the power and reset button handling for the DSMG600:
+ * Remove the superfluous declaration of ctrl_alt_del().
+ * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
+ * Perform the reset on the release of the power button, so that
+   NAS devices which have been set to auto-power-on (by bridging
+   the power button) do not continuously power cycle.
+ * Remove all superflous constants from dsmg600.h
+
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
+---
+ arch/arm/mach-ixp4xx/dsmg600-power.c  |   24 ++++++++++++++----------
+ include/asm-arm/arch-ixp4xx/dsmg600.h |    7 +------
+ 2 files changed, 15 insertions(+), 16 deletions(-)
+
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
+===================================================================
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/dsmg600-power.c	2008-01-11 16:20:26.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c	2008-01-11 16:20:30.000000000 +1030
+@@ -26,10 +26,9 @@
+ #include <linux/jiffies.h>
+ #include <linux/timer.h>
+ 
++#include <asm/gpio.h>
+ #include <asm/mach-types.h>
+ 
+-extern void ctrl_alt_del(void);
+-
+ /* This is used to make sure the power-button pusher is serious.  The button
+  * must be held until the value of this counter reaches zero.
+  */
+@@ -47,9 +46,16 @@
+ 	 * state of the power button.
+ 	 */
+ 
+-	if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
++	if (gpio_get_value(DSMG600_PB_GPIO)) {
+ 
+ 		/* IO Pin is 1 (button pushed) */
++		if (power_button_countdown > 0) {
++			power_button_countdown--;
++		}
++
++	} else {
++
++		/* Done on button release, to allow for auto-power-on mods. */
+ 		if (power_button_countdown == 0) {
+ 			/* Signal init to do the ctrlaltdel action, this will bypass
+ 			 * init if it hasn't started and do a kernel_restart.
+@@ -58,11 +64,9 @@
+ 
+ 			/* Change the state of the power LED to "blink" */
+ 			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
++		} else {
++			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+ 		}
+-		power_button_countdown--;
+-
+-	} else {
+-		power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+ 	}
+ 
+ 	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+@@ -81,12 +85,12 @@
+ 	if (!(machine_is_dsmg600()))
+ 		return 0;
+ 
+-	if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
++	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+ 		IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
+ 		NULL) < 0) {
+ 
+ 		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+-			DSMG600_RB_IRQ);
++			gpio_to_irq(DSMG600_RB_GPIO));
+ 
+ 		return -EIO;
+ 	}
+@@ -114,7 +118,7 @@
+ 
+ 	del_timer_sync(&dsmg600_power_timer);
+ 
+-	free_irq(DSMG600_RB_IRQ, NULL);
++	free_irq(gpio_to_irq(DSMG600_RB_GPIO), NULL);
+ }
+ 
+ module_init(dsmg600_power_init);
+Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h
+===================================================================
+--- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/dsmg600.h	2008-01-11 16:20:26.000000000 +1030
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h	2008-01-11 16:20:30.000000000 +1030
+@@ -40,18 +40,13 @@
+ /* Buttons */
+ 
+ #define DSMG600_PB_GPIO		15	/* power button */
+-#define DSMG600_PB_BM		(1L << DSMG600_PB_GPIO)
+-
+ #define DSMG600_RB_GPIO		3	/* reset button */
+ 
+-#define DSMG600_RB_IRQ		IRQ_IXP4XX_GPIO3
++/* Power control */
+ 
+ #define DSMG600_PO_GPIO		2	/* power off */
+ 
+ /* LEDs */
+ 
+ #define DSMG600_LED_PWR_GPIO	0
+-#define DSMG600_LED_PWR_BM	(1L << DSMG600_LED_PWR_GPIO)
+-
+ #define DSMG600_LED_WLAN_GPIO	14
+-#define DSMG600_LED_WLAN_BM	(1L << DSMG600_LED_WLAN_GPIO)
diff --git a/target/linux/ixp4xx/patches-2.6.24/017-nas100d_auto_power_on.patch b/target/linux/ixp4xx/patches-2.6.24/017-nas100d_auto_power_on.patch
new file mode 100644
index 000000000..b77df4850
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/017-nas100d_auto_power_on.patch
@@ -0,0 +1,188 @@
+Upgrade the power and reset button handling for the NAS100D:
+ * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
+ * Perform the reset only after the power button has been held down
+   for at least two seconds.  Do the reset on the release of the power
+   button, so that NAS devices which have been set to auto-power-on (by
+   bridging the power button) do not continuously power cycle.
+ * Remove all superflous constants from nas100d.h
+ * Add LED constants to nas100d.h while we're there.
+Also, update the board LED setup code to use constants.
+
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
+===================================================================
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/nas100d-power.c	2008-01-11 16:59:20.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-power.c	2008-01-11 17:03:23.000000000 +1030
+@@ -21,15 +21,61 @@
+ #include <linux/irq.h>
+ #include <linux/module.h>
+ #include <linux/reboot.h>
++#include <linux/jiffies.h>
++#include <linux/timer.h>
+ 
++#include <asm/gpio.h>
+ #include <asm/mach-types.h>
+ 
+-static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
++extern void ctrl_alt_del(void);
++
++/* This is used to make sure the power-button pusher is serious.  The button
++ * must be held until the value of this counter reaches zero.
++ */
++static volatile int power_button_countdown;
++
++/* Must hold the button down for at least this many counts to be processed */
++#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
++
++static void nas100d_power_handler(unsigned long data);
++static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
++
++static void nas100d_power_handler(unsigned long data)
+ {
+-	/* Signal init to do the ctrlaltdel action, this will bypass init if
+-	 * it hasn't started and do a kernel_restart.
++	/* This routine is called twice per second to check the
++	 * state of the power button.
+ 	 */
+-	ctrl_alt_del();
++
++	if (gpio_get_value(NAS100D_PB_GPIO)) {
++
++		/* IO Pin is 1 (button pushed) */
++		if (power_button_countdown > 0) {
++			power_button_countdown--;
++		}
++
++	} else {
++
++		/* Done on button release, to allow for auto-power-on mods. */
++		if (power_button_countdown == 0) {
++			/* Signal init to do the ctrlaltdel action, this will bypass
++			 * init if it hasn't started and do a kernel_restart.
++			 */
++			ctrl_alt_del();
++
++			/* Change the state of the power LED to "blink" */
++			gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
++		} else {
++			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
++		}
++	}
++
++	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
++}
++
++static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
++{
++	/* This is the paper-clip reset, it shuts the machine down directly. */
++	machine_power_off();
+ 
+ 	return IRQ_HANDLED;
+ }
+@@ -39,17 +85,30 @@
+ 	if (!(machine_is_nas100d()))
+ 		return 0;
+ 
+-	set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
++	set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW);
+ 
+-	if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
++	if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
+ 		IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
+ 
+ 		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+-			NAS100D_RB_IRQ);
++			gpio_to_irq(NAS100D_RB_GPIO));
+ 
+ 		return -EIO;
+ 	}
+ 
++	/* The power button on the Iomega NAS100d is on GPIO 14, but
++	 * it cannot handle interrupts on that GPIO line.  So we'll
++	 * have to poll it with a kernel timer.
++	 */
++
++	/* Make sure that the power button GPIO is set up as an input */
++	gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
++
++	/* Set the initial value for the power button IRQ handler */
++	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
++
++	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
++
+ 	return 0;
+ }
+ 
+@@ -58,7 +117,9 @@
+ 	if (!(machine_is_nas100d()))
+ 		return;
+ 
+-	free_irq(NAS100D_RB_IRQ, NULL);
++	del_timer_sync(&nas100d_power_timer);
++
++	free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL);
+ }
+ 
+ module_init(nas100d_power_init);
+Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/nas100d.h
+===================================================================
+--- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/nas100d.h	2008-01-11 16:59:20.000000000 +1030
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/nas100d.h	2008-01-11 17:03:23.000000000 +1030
+@@ -38,15 +38,15 @@
+ 
+ /* Buttons */
+ 
+-#define NAS100D_PB_GPIO         14
+-#define NAS100D_RB_GPIO         4
++#define NAS100D_PB_GPIO         14   /* power button */
++#define NAS100D_RB_GPIO         4    /* reset button */
++
++/* Power control */
++
+ #define NAS100D_PO_GPIO         12   /* power off */
+ 
+-#define NAS100D_PB_IRQ          IRQ_IXP4XX_GPIO14
+-#define NAS100D_RB_IRQ          IRQ_IXP4XX_GPIO4
++/* LEDs */
+ 
+-/*
+-#define NAS100D_PB_BM           (1L << NAS100D_PB_GPIO)
+-#define NAS100D_PO_BM           (1L << NAS100D_PO_GPIO)
+-#define NAS100D_RB_BM           (1L << NAS100D_RB_GPIO)
+-*/
++#define NAS100D_LED_WLAN_GPIO	0
++#define NAS100D_LED_DISK_GPIO	3
++#define NAS100D_LED_PWR_GPIO	15
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/nas100d-setup.c	2008-01-11 17:03:23.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c	2008-01-11 17:06:15.000000000 +1030
+@@ -44,20 +44,20 @@
+ static struct resource nas100d_led_resources[] = {
+ 	{
+ 		.name		= "wlan",   /* green led */
+-		.start		= 0,
+-		.end		= 0,
++		.start		= NAS100D_LED_WLAN_GPIO,
++		.end		= NAS100D_LED_WLAN_GPIO,
+ 		.flags		= IXP4XX_GPIO_LOW,
+ 	},
+ 	{
+-		.name		= "ready",  /* blue power led (off is flashing!) */
+-		.start		= 15,
+-		.end		= 15,
++		.name		= "power",  /* blue power led (off is flashing!) */
++		.start		= NAS100D_LED_PWR_GPIO,
++		.end		= NAS100D_LED_PWR_GPIO,
+ 		.flags		= IXP4XX_GPIO_LOW,
+ 	},
+ 	{
+ 		.name		= "disk",   /* yellow led */
+-		.start		= 3,
+-		.end		= 3,
++		.start		= NAS100D_LED_DISK_GPIO,
++		.end		= NAS100D_LED_DISK_GPIO,
+ 		.flags		= IXP4XX_GPIO_LOW,
+ 	},
+ };
diff --git a/target/linux/ixp4xx/patches-2.6.24/020-ixp4xx_i2c_gpio.patch b/target/linux/ixp4xx/patches-2.6.24/020-ixp4xx_i2c_gpio.patch
new file mode 100644
index 000000000..b1b561232
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/020-ixp4xx_i2c_gpio.patch
@@ -0,0 +1,232 @@
+Migrate all ixp4xx devices to the bitbanging I2C bus driver utilizing
+the arch-neutral GPIO API (linux/i2c-gpio.h).
+
+Tested by the nslu2-linux and openwrt projects in public firmware releases.
+
+Acked-by: Rod Whitby <rod@whitby.id.au>
+Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
+
+Index: linux-2.6.24-rc6-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.24-rc6-armeb.orig/arch/arm/mach-ixp4xx/nslu2-setup.c	2008-01-05 18:10:05.000000000 +1030
++++ linux-2.6.24-rc6-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c	2008-01-05 18:10:10.000000000 +1030
+@@ -18,6 +18,7 @@
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
++#include <linux/i2c-gpio.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -41,7 +42,7 @@
+ 	.resource		= &nslu2_flash_resource,
+ };
+ 
+-static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
++static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = {
+ 	.sda_pin		= NSLU2_SDA_PIN,
+ 	.scl_pin		= NSLU2_SCL_PIN,
+ };
+@@ -82,11 +83,12 @@
+ };
+ #endif
+ 
+-static struct platform_device nslu2_i2c_controller = {
+-	.name			= "IXP4XX-I2C",
++static struct platform_device nslu2_i2c_gpio = {
++	.name			= "i2c-gpio",
+ 	.id			= 0,
+-	.dev.platform_data	= &nslu2_i2c_gpio_pins,
+-	.num_resources		= 0,
++	.dev	 = {
++		.platform_data	= &nslu2_i2c_gpio_data,
++	},
+ };
+ 
+ static struct platform_device nslu2_beeper = {
+@@ -139,7 +141,7 @@
+ };
+ 
+ static struct platform_device *nslu2_devices[] __initdata = {
+-	&nslu2_i2c_controller,
++	&nslu2_i2c_gpio,
+ 	&nslu2_flash,
+ 	&nslu2_beeper,
+ #ifdef CONFIG_LEDS_IXP4XX
+Index: linux-2.6.24-rc6-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.24-rc6-armeb.orig/arch/arm/mach-ixp4xx/nas100d-setup.c	2008-01-05 18:10:05.000000000 +1030
++++ linux-2.6.24-rc6-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c	2008-01-05 18:10:10.000000000 +1030
+@@ -16,6 +16,7 @@
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
++#include <linux/i2c-gpio.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -68,16 +69,17 @@
+ };
+ #endif
+ 
+-static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
++static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = {
+ 	.sda_pin		= NAS100D_SDA_PIN,
+ 	.scl_pin		= NAS100D_SCL_PIN,
+ };
+ 
+-static struct platform_device nas100d_i2c_controller = {
+-	.name			= "IXP4XX-I2C",
++static struct platform_device nas100d_i2c_gpio = {
++	.name			= "i2c-gpio",
+ 	.id			= 0,
+-	.dev.platform_data	= &nas100d_i2c_gpio_pins,
+-	.num_resources		= 0,
++	.dev	 = {
++		.platform_data	= &nas100d_i2c_gpio_data,
++	},
+ };
+ 
+ static struct resource nas100d_uart_resources[] = {
+@@ -124,7 +126,7 @@
+ };
+ 
+ static struct platform_device *nas100d_devices[] __initdata = {
+-	&nas100d_i2c_controller,
++	&nas100d_i2c_gpio,
+ 	&nas100d_flash,
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&nas100d_leds,
+Index: linux-2.6.24-rc6-armeb/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.24-rc6-armeb.orig/arch/arm/mach-ixp4xx/avila-setup.c	2008-01-05 18:10:05.000000000 +1030
++++ linux-2.6.24-rc6-armeb/arch/arm/mach-ixp4xx/avila-setup.c	2008-01-05 18:10:10.000000000 +1030
+@@ -18,6 +18,7 @@
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
++#include <linux/i2c-gpio.h>
+ 
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -47,18 +48,17 @@
+ 	.resource	= &avila_flash_resource,
+ };
+ 
+-static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
++static struct i2c_gpio_platform_data avila_i2c_gpio_data = {
+ 	.sda_pin	= AVILA_SDA_PIN,
+ 	.scl_pin	= AVILA_SCL_PIN,
+ };
+ 
+-static struct platform_device avila_i2c_controller = {
+-	.name		= "IXP4XX-I2C",
++static struct platform_device avila_i2c_gpio = {
++	.name		= "i2c-gpio",
+ 	.id		= 0,
+-	.dev		= {
+-		.platform_data = &avila_i2c_gpio_pins,
++	.dev	 = {
++		.platform_data	= &avila_i2c_gpio_data,
+ 	},
+-	.num_resources	= 0
+ };
+ 
+ static struct resource avila_uart_resources[] = {
+@@ -133,7 +133,7 @@
+ };
+ 
+ static struct platform_device *avila_devices[] __initdata = {
+-	&avila_i2c_controller,
++	&avila_i2c_gpio,
+ 	&avila_flash,
+ 	&avila_uart
+ };
+Index: linux-2.6.24-rc6-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c
+===================================================================
+--- linux-2.6.24-rc6-armeb.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c	2008-01-05 18:10:05.000000000 +1030
++++ linux-2.6.24-rc6-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c	2008-01-05 18:10:10.000000000 +1030
+@@ -14,6 +14,7 @@
+ #include <linux/kernel.h>
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
++#include <linux/i2c-gpio.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -37,15 +38,17 @@
+ 	.resource		= &dsmg600_flash_resource,
+ };
+ 
+-static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
++static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = {
+ 	.sda_pin		= DSMG600_SDA_PIN,
+ 	.scl_pin		= DSMG600_SCL_PIN,
+ };
+ 
+-static struct platform_device dsmg600_i2c_controller = {
+-	.name			= "IXP4XX-I2C",
++static struct platform_device dsmg600_i2c_gpio = {
++	.name			= "i2c-gpio",
+ 	.id			= 0,
+-	.dev.platform_data	= &dsmg600_i2c_gpio_pins,
++	.dev	 = {
++		.platform_data	= &dsmg600_i2c_gpio_data,
++	},
+ };
+ 
+ #ifdef CONFIG_LEDS_CLASS
+@@ -116,7 +119,7 @@
+ };
+ 
+ static struct platform_device *dsmg600_devices[] __initdata = {
+-	&dsmg600_i2c_controller,
++	&dsmg600_i2c_gpio,
+ 	&dsmg600_flash,
+ };
+ 
+Index: linux-2.6.24-rc6-armeb/arch/arm/mach-ixp4xx/ixdp425-setup.c
+===================================================================
+--- linux-2.6.24-rc6-armeb.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c	2008-01-05 18:10:05.000000000 +1030
++++ linux-2.6.24-rc6-armeb/arch/arm/mach-ixp4xx/ixdp425-setup.c	2008-01-05 18:10:10.000000000 +1030
+@@ -15,6 +15,7 @@
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
++#include <linux/i2c-gpio.h>
+ #include <linux/io.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/nand.h>
+@@ -120,18 +121,17 @@
+ };
+ #endif	/* CONFIG_MTD_NAND_PLATFORM */
+ 
+-static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = {
++static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = {
+ 	.sda_pin	= IXDP425_SDA_PIN,
+ 	.scl_pin	= IXDP425_SCL_PIN,
+ };
+ 
+-static struct platform_device ixdp425_i2c_controller = {
+-	.name		= "IXP4XX-I2C",
++static struct platform_device ixdp425_i2c_gpio = {
++	.name		= "i2c-gpio",
+ 	.id		= 0,
+-	.dev		= {
+-		.platform_data = &ixdp425_i2c_gpio_pins,
++	.dev	 = {
++		.platform_data	= &ixdp425_i2c_gpio_data,
+ 	},
+-	.num_resources	= 0
+ };
+ 
+ static struct resource ixdp425_uart_resources[] = {
+@@ -178,7 +178,7 @@
+ };
+ 
+ static struct platform_device *ixdp425_devices[] __initdata = {
+-	&ixdp425_i2c_controller,
++	&ixdp425_i2c_gpio,
+ 	&ixdp425_flash,
+ #if defined(CONFIG_MTD_NAND_PLATFORM) || \
+     defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
diff --git a/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch b/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch
new file mode 100644
index 000000000..c133034e5
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch
@@ -0,0 +1,794 @@
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-pci.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-pci.c	2008-01-11 17:06:33.000000000 +1030
+@@ -0,0 +1,71 @@
++/*
++ * arch/arch/mach-ixp4xx/fsg-pci.c
++ *
++ * FSG board-level PCI initialization
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ * Maintainer: http://www.nslu2-linux.org/
++ *
++ * based on ixdp425-pci.c:
++ *	Copyright (C) 2002 Intel Corporation.
++ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach/pci.h>
++#include <asm/mach-types.h>
++
++void __init fsg_pci_preinit(void)
++{
++	set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
++	set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
++	set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++	static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
++		IRQ_FSG_PCI_INTC,
++		IRQ_FSG_PCI_INTB,
++		IRQ_FSG_PCI_INTA,
++	};
++
++	int irq = -1;
++	slot = slot - 11;
++
++	if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
++		pin >= 1 && pin <= FSG_PCI_IRQ_LINES) {
++			irq = pci_irq_table[(slot - 1)];
++	}
++        printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, irq);
++
++        return irq;
++}
++
++struct hw_pci fsg_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        fsg_pci_preinit,
++	.swizzle =        pci_std_swizzle,
++	.setup =          ixp4xx_setup,
++	.scan =           ixp4xx_scan_bus,
++	.map_irq =        fsg_map_irq,
++};
++
++int __init fsg_pci_init(void)
++{
++	if (machine_is_fsg())
++		pci_common_init(&fsg_pci);
++	return 0;
++}
++
++subsys_initcall(fsg_pci_init);
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-setup.c	2008-01-11 17:06:33.000000000 +1030
+@@ -0,0 +1,220 @@
++/*
++ * arch/arm/mach-ixp4xx/fsg-setup.c
++ *
++ * FSG board-setup
++ *
++ * based ixdp425-setup.c:
++ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/leds.h>
++#include <linux/reboot.h>
++#include <linux/i2c-gpio.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++#include <asm/io.h>
++
++static struct flash_platform_data fsg_flash_data = {
++	.map_name		= "cfi_probe",
++	.width			= 2,
++};
++
++static struct resource fsg_flash_resource = {
++	.flags			= IORESOURCE_MEM,
++};
++
++static struct platform_device fsg_flash = {
++	.name			= "IXP4XX-Flash",
++	.id			= 0,
++	.dev.platform_data	= &fsg_flash_data,
++	.num_resources		= 1,
++	.resource		= &fsg_flash_resource,
++};
++
++static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
++	.sda_pin		= FSG_SDA_PIN,
++	.scl_pin		= FSG_SCL_PIN,
++};
++
++static struct platform_device fsg_i2c_gpio = {
++	.name			= "i2c-gpio",
++	.id			= 0,
++	.dev	 = {
++		.platform_data	= &fsg_i2c_gpio_data,
++	},
++};
++
++static struct resource fsg_uart_resources[] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM,
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM,
++	}
++};
++
++static struct plat_serial8250_port fsg_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ }
++};
++
++static struct platform_device fsg_uart = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= fsg_uart_data,
++	.num_resources		= ARRAY_SIZE(fsg_uart_resources),
++	.resource		= fsg_uart_resources,
++};
++
++static struct platform_device fsg_leds = {
++	.name		= "fsg-led",
++	.id		= -1,
++};
++
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info fsg_plat_eth[] = {
++        {
++                .phy            = 5,
++                .rxq            = 3,
++		.txreadyq	= 20,
++        }, {
++                .phy            = 4,
++                .rxq            = 4,
++		.txreadyq	= 21,
++        }
++};
++
++static struct platform_device fsg_eth[] = {
++        {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEB,
++                .dev.platform_data      = fsg_plat_eth,
++        }, {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEC,
++                .dev.platform_data      = fsg_plat_eth + 1,
++        }
++};
++
++static struct platform_device *fsg_devices[] __initdata = {
++	&fsg_i2c_gpio,
++	&fsg_flash,
++	&fsg_leds,
++	&fsg_eth[0],
++	&fsg_eth[1],
++};
++
++static void fsg_power_off(void)
++{
++	printk("Restarting system.\n");
++	machine_restart(NULL);
++}
++
++static void __init fsg_init(void)
++{
++	uint8_t __iomem *f;
++	int i;
++
++	ixp4xx_sys_init();
++
++	pm_power_off = fsg_power_off;
++
++	fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	fsg_flash_resource.end =
++		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++        *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++        *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	/* Configure CS2 for operation, 8bit and writable */
++	*IXP4XX_EXP_CS2 = 0xbfff0002;
++
++	/* This is only useful on a modified machine, but it is valuable
++	 * to have it first in order to see debug messages, and so that
++	 * it does *not* get removed if platform_add_devices fails!
++	 */
++	(void)platform_device_register(&fsg_uart);
++
++	platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
++
++
++	/*
++	 * Map in a portion of the flash and read the MAC addresses.
++	 * Since it is stored in BE in the flash itself, we need to
++	 * byteswap it if we're in LE mode.
++	 */
++	if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000))) {
++#ifdef __ARMEB__
++		for (i = 0; i < 6; i++) {
++			fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
++			fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
++		}
++#else
++		fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0422 + 3);
++		fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0422 + 2);
++		fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0422 + 1);
++		fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0422 + 0);
++		fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0422 + 7);
++		fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0422 + 6);
++
++		fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0422 + 3);
++		fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C0422 + 2);
++		fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C0422 + 1);
++		fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C0422 + 0);
++		fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C0422 + 7);
++		fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0422 + 6);
++#endif
++		iounmap(f);
++	}
++	printk(KERN_INFO "FSG: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
++	       fsg_plat_eth[0].hwaddr[0], fsg_plat_eth[0].hwaddr[1],
++	       fsg_plat_eth[0].hwaddr[2], fsg_plat_eth[0].hwaddr[3],
++	       fsg_plat_eth[0].hwaddr[4], fsg_plat_eth[0].hwaddr[5]);
++	printk(KERN_INFO "FSG: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 1\n",
++	       fsg_plat_eth[1].hwaddr[0], fsg_plat_eth[1].hwaddr[1],
++	       fsg_plat_eth[1].hwaddr[2], fsg_plat_eth[1].hwaddr[3],
++	       fsg_plat_eth[1].hwaddr[4], fsg_plat_eth[1].hwaddr[5]);
++
++}
++
++MACHINE_START(FSG, "Freecom FSG-3")
++	/* Maintainer: www.nslu2-linux.org */
++	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
++	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.timer		= &ixp4xx_timer,
++	.boot_params	= 0x0100,
++	.init_machine	= fsg_init,
++MACHINE_END
++
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/Kconfig	2008-01-11 17:05:08.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Kconfig	2008-01-11 17:06:33.000000000 +1030
+@@ -125,6 +125,15 @@
+ 	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
+ 	default y
+ 
++config MACH_FSG
++	bool
++	prompt "Freecom FSG-3"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Freecom's
++	  FSG-3 device. For more information on this platform,
++	  see http://www.nslu2-linux.org/wiki/FSG3/HomePage
++
+ #
+ # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
+ #
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/Makefile	2008-01-11 17:05:08.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/Makefile	2008-01-11 17:06:33.000000000 +1030
+@@ -15,6 +15,7 @@
+ obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
++obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -28,6 +29,7 @@
+ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
+ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
++obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o fsg-power.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/fsg.h	2008-01-11 17:06:33.000000000 +1030
+@@ -0,0 +1,50 @@
++/*
++ * include/asm-arm/arch-ixp4xx/fsg.h
++ *
++ * Freecom FSG-3 platform specific definitions
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
++ * Maintainers: http://www.nslu2-linux.org
++ *
++ * Based on coyote.h by
++ * Copyright 2004 (c) MontaVista, Software, Inc.
++ *
++ * This file is licensed under  the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#ifndef __ASM_ARCH_HARDWARE_H__
++#error "Do not include this directly, instead #include <asm/hardware.h>"
++#endif
++
++#define FSG_SDA_PIN		12
++#define FSG_SCL_PIN		13
++
++/*
++ * FSG PCI IRQs
++ */
++#define FSG_PCI_MAX_DEV		3
++#define FSG_PCI_IRQ_LINES	3
++
++
++/* PCI controller GPIO to IRQ pin mappings */
++#define FSG_PCI_INTA_PIN	6
++#define FSG_PCI_INTB_PIN	7
++#define FSG_PCI_INTC_PIN	5
++
++/* Buttons */
++
++#define FSG_SB_GPIO		4	/* sync button */
++#define FSG_RB_GPIO		9	/* reset button */
++#define FSG_UB_GPIO		10	/* usb button */
++
++/* LEDs */
++
++#define FSG_LED_WLAN_BIT	0
++#define FSG_LED_WAN_BIT		1
++#define FSG_LED_SATA_BIT	2
++#define FSG_LED_USB_BIT		4
++#define FSG_LED_RING_BIT	5
++#define FSG_LED_SYNC_BIT	7
+Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/hardware.h
+===================================================================
+--- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h	2008-01-11 17:05:08.000000000 +1030
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/hardware.h	2008-01-11 17:06:33.000000000 +1030
+@@ -45,5 +45,6 @@
+ #include "nslu2.h"
+ #include "nas100d.h"
+ #include "dsmg600.h"
++#include "fsg.h"
+ 
+ #endif  /* _ASM_ARCH_HARDWARE_H */
+Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h
+===================================================================
+--- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h	2008-01-11 17:05:08.000000000 +1030
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/irqs.h	2008-01-11 17:06:33.000000000 +1030
+@@ -128,4 +128,11 @@
+ #define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
+ #define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
+ 
++/*
++ * Freecom FSG-3 Board IRQs
++ */
++#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
++#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
++#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
++
+ #endif
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/fsg-power.c	2008-01-11 17:06:33.000000000 +1030
+@@ -0,0 +1,89 @@
++/*
++ * arch/arm/mach-ixp4xx/fsg-power.c
++ *
++ * FSG Power/Reset driver
++ *
++ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
++ *
++ * based on nslu2-power.c
++ *  Copyright (C) 2005 Tower Technologies
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/reboot.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/jiffies.h>
++#include <linux/timer.h>
++
++#include <asm/gpio.h>
++#include <asm/mach-types.h>
++
++static irqreturn_t fsg_power_handler(int irq, void *dev_id)
++{
++	/* Signal init to do the ctrlaltdel action, this will bypass init if
++	 * it hasn't started and do a kernel_restart.
++	 */
++	ctrl_alt_del();
++
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
++{
++	/* This is the paper-clip reset, it shuts the machine down directly.
++	 */
++	machine_power_off();
++
++	return IRQ_HANDLED;
++}
++
++static int __init fsg_power_init(void)
++{
++	if (!(machine_is_fsg()))
++		return 0;
++
++	set_irq_type(gpio_to_irq(FSG_RB_GPIO), IRQT_LOW);
++	set_irq_type(gpio_to_irq(FSG_SB_GPIO), IRQT_LOW);
++
++	if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
++		IRQF_DISABLED, "FSG reset button", NULL) < 0) {
++
++		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
++			gpio_to_irq(FSG_RB_GPIO));
++
++		return -EIO;
++	}
++
++	if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
++		IRQF_DISABLED, "FSG power button", NULL) < 0) {
++
++		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
++			gpio_to_irq(FSG_SB_GPIO));
++
++		return -EIO;
++	}
++
++	return 0;
++}
++
++static void __exit fsg_power_exit(void)
++{
++	if (!(machine_is_fsg()))
++		return;
++
++	free_irq(gpio_to_irq(FSG_SB_GPIO), NULL);
++	free_irq(gpio_to_irq(FSG_RB_GPIO), NULL);
++}
++
++module_init(fsg_power_init);
++module_exit(fsg_power_exit);
++
++MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
++MODULE_DESCRIPTION("FSG Power/Reset driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.23.12-armeb/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.23.12-armeb.orig/drivers/leds/Kconfig	2008-01-11 17:05:08.000000000 +1030
++++ linux-2.6.23.12-armeb/drivers/leds/Kconfig	2008-01-11 17:06:33.000000000 +1030
+@@ -48,6 +48,12 @@
+ 	  particular board must have LEDs and they must be connected
+ 	  to the GPIO lines.  If unsure, say Y.
+ 
++config LEDS_FSG
++	tristate "LED Support for the Freecom FSG-3"
++	depends on LEDS_CLASS && MACH_FSG
++	help
++	  This option enables support for the LEDs on the Freecom FSG-3.
++
+ config LEDS_TOSA
+ 	tristate "LED Support for the Sharp SL-6000 series"
+ 	depends on LEDS_CLASS && PXA_SHARPSL
+Index: linux-2.6.23.12-armeb/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.23.12-armeb.orig/drivers/leds/Makefile	2008-01-11 17:05:08.000000000 +1030
++++ linux-2.6.23.12-armeb/drivers/leds/Makefile	2008-01-11 17:06:33.000000000 +1030
+@@ -9,6 +9,7 @@
+ obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
+ obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
+ obj-$(CONFIG_LEDS_IXP4XX)		+= leds-ixp4xx-gpio.o
++obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
+ obj-$(CONFIG_LEDS_TOSA)			+= leds-tosa.o
+ obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
+ obj-$(CONFIG_LEDS_AMS_DELTA)		+= leds-ams-delta.o
+Index: linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.12-armeb/drivers/leds/leds-fsg.c	2008-01-11 17:06:33.000000000 +1030
+@@ -0,0 +1,243 @@
++/*
++ * LED Driver for the Freecom FSG-3
++ *
++ * Copyright (c) 2008 Rod Whitby <rod@whitby.id.au>
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ *
++ * Based on leds-spitz.c
++ * Copyright 2005-2006 Openedhand Ltd.
++ * Author: Richard Purdie <rpurdie@openedhand.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <asm/arch/hardware.h>
++#include <asm/io.h>
++
++static short __iomem *latch_address;
++static unsigned short latch_value;
++
++
++static void fsg_led_wlan_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_WLAN_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_WLAN_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++static void fsg_led_wan_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_WAN_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_WAN_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++static void fsg_led_sata_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_SATA_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_SATA_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++static void fsg_led_usb_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_USB_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_USB_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++static void fsg_led_sync_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_SYNC_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_SYNC_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++static void fsg_led_ring_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	if (value) {
++		latch_value &= ~(1 << FSG_LED_RING_BIT);
++		*latch_address = latch_value;
++	}
++	else {
++		latch_value |=  (1 << FSG_LED_RING_BIT);
++		*latch_address = latch_value;
++	}
++}
++
++
++
++static struct led_classdev fsg_wlan_led = {
++	.name			= "fsg:wlan",
++	.brightness_set		= fsg_led_wlan_set,
++};
++
++static struct led_classdev fsg_wan_led = {
++	.name			= "fsg:wan",
++	.brightness_set		= fsg_led_wan_set,
++};
++
++static struct led_classdev fsg_sata_led = {
++	.name			= "fsg:sata",
++	.brightness_set		= fsg_led_sata_set,
++};
++
++static struct led_classdev fsg_usb_led = {
++	.name			= "fsg:usb",
++	.brightness_set		= fsg_led_usb_set,
++};
++
++static struct led_classdev fsg_sync_led = {
++	.name			= "fsg:sync",
++	.brightness_set		= fsg_led_sync_set,
++};
++
++static struct led_classdev fsg_ring_led = {
++	.name			= "fsg:ring",
++	.brightness_set		= fsg_led_ring_set,
++};
++
++
++
++#ifdef CONFIG_PM
++static int fsg_led_suspend(struct platform_device *dev, pm_message_t state)
++{
++	led_classdev_suspend(&fsg_wlan_led);
++	led_classdev_suspend(&fsg_wan_led);
++	led_classdev_suspend(&fsg_sata_led);
++	led_classdev_suspend(&fsg_usb_led);
++	led_classdev_suspend(&fsg_sync_led);
++	led_classdev_suspend(&fsg_ring_led);
++	return 0;
++}
++
++static int fsg_led_resume(struct platform_device *dev)
++{
++	led_classdev_resume(&fsg_wlan_led);
++	led_classdev_resume(&fsg_wan_led);
++	led_classdev_resume(&fsg_sata_led);
++	led_classdev_resume(&fsg_usb_led);
++	led_classdev_resume(&fsg_sync_led);
++	led_classdev_resume(&fsg_ring_led);
++	return 0;
++}
++#endif
++
++
++static int fsg_led_probe(struct platform_device *pdev)
++{
++	int ret;
++
++	/* FIXME: Need to work out how to handle failure below */
++
++	ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
++	if (ret < 0)
++		return ret;
++
++	ret = led_classdev_register(&pdev->dev, &fsg_wan_led);
++	if (ret < 0)
++		return ret;
++
++	ret = led_classdev_register(&pdev->dev, &fsg_sata_led);
++	if (ret < 0)
++		return ret;
++
++	ret = led_classdev_register(&pdev->dev, &fsg_usb_led);
++	if (ret < 0)
++		return ret;
++
++	ret = led_classdev_register(&pdev->dev, &fsg_sync_led);
++	if (ret < 0)
++		return ret;
++
++	ret = led_classdev_register(&pdev->dev, &fsg_ring_led);
++	if (ret < 0)
++		return ret;
++
++	return ret;
++}
++
++static int fsg_led_remove(struct platform_device *pdev)
++{
++	led_classdev_unregister(&fsg_wlan_led);
++	led_classdev_unregister(&fsg_wan_led);
++	led_classdev_unregister(&fsg_sata_led);
++	led_classdev_unregister(&fsg_usb_led);
++	led_classdev_unregister(&fsg_sync_led);
++	led_classdev_unregister(&fsg_ring_led);
++
++	return 0;
++}
++
++
++static struct platform_driver fsg_led_driver = {
++	.probe		= fsg_led_probe,
++	.remove		= fsg_led_remove,
++#ifdef CONFIG_PM
++	.suspend	= fsg_led_suspend,
++	.resume		= fsg_led_resume,
++#endif
++	.driver		= {
++		.name		= "fsg-led",
++	},
++};
++
++
++static int __init fsg_led_init(void)
++{
++	/* Map the LED chip select address space */
++	latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
++	if (!latch_address)
++		return -ENOMEM;
++	latch_value = 0xffff;
++	*latch_address = latch_value;
++	/* FIXME: We leak memory if the next line fails */
++	return platform_driver_register(&fsg_led_driver);
++}
++
++static void __exit fsg_led_exit(void)
++{
++ 	platform_driver_unregister(&fsg_led_driver);
++	iounmap(latch_address);
++}
++
++
++module_init(fsg_led_init);
++module_exit(fsg_led_exit);
++
++MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
++MODULE_DESCRIPTION("Freecom FSG-3 LED driver");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/ixp4xx/patches-2.6.24/031-ixp4xx-net-drivers-nslu2.patch b/target/linux/ixp4xx/patches-2.6.24/031-ixp4xx-net-drivers-nslu2.patch
new file mode 100644
index 000000000..d4c710c04
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/031-ixp4xx-net-drivers-nslu2.patch
@@ -0,0 +1,88 @@
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/nslu2-setup.c	2008-01-08 15:28:13.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c	2008-01-08 15:28:32.000000000 +1030
+@@ -24,6 +24,7 @@
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+ #include <asm/mach/time.h>
++#include <asm/io.h>
+ 
+ static struct flash_platform_data nslu2_flash_data = {
+ 	.map_name		= "cfi_probe",
+@@ -140,6 +141,23 @@
+ 	.resource		= nslu2_uart_resources,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info nslu2_plat_eth[] = {
++	{
++		.phy		= 1,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}
++};
++
++static struct platform_device nslu2_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= nslu2_plat_eth,
++	}
++};
++
+ static struct platform_device *nslu2_devices[] __initdata = {
+ 	&nslu2_i2c_gpio,
+ 	&nslu2_flash,
+@@ -147,6 +165,7 @@
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&nslu2_leds,
+ #endif
++	&nslu2_eth[0],
+ };
+ 
+ static void nslu2_power_off(void)
+@@ -175,6 +194,9 @@
+ 
+ static void __init nslu2_init(void)
+ {
++	uint8_t __iomem *f;
++	int i;
++
+ 	ixp4xx_sys_init();
+ 
+ 	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+@@ -191,6 +213,33 @@
+ 	(void)platform_device_register(&nslu2_uart);
+ 
+ 	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
++
++
++	/*
++	 * Map in a portion of the flash and read the MAC address.
++	 * Since it is stored in BE in the flash itself, we need to
++	 * byteswap it if we're in LE mode.
++	 */
++	if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000))) {
++#ifdef __ARMEB__
++		for (i = 0; i < 6; i++) {
++			nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
++		}
++#else
++		nslu2_plat_eth[0].hwaddr[0] = readb(f + 0x3FFB0 + 3);
++		nslu2_plat_eth[0].hwaddr[1] = readb(f + 0x3FFB0 + 2);
++		nslu2_plat_eth[0].hwaddr[2] = readb(f + 0x3FFB0 + 1);
++		nslu2_plat_eth[0].hwaddr[3] = readb(f + 0x3FFB0 + 0);
++		nslu2_plat_eth[0].hwaddr[4] = readb(f + 0x3FFB0 + 7);
++		nslu2_plat_eth[0].hwaddr[5] = readb(f + 0x3FFB0 + 6);
++#endif
++		iounmap(f);
++	}
++	printk(KERN_INFO "NSLU2: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
++	       nslu2_plat_eth[0].hwaddr[0], nslu2_plat_eth[0].hwaddr[1],
++	       nslu2_plat_eth[0].hwaddr[2], nslu2_plat_eth[0].hwaddr[3],
++	       nslu2_plat_eth[0].hwaddr[4], nslu2_plat_eth[0].hwaddr[5]);
++
+ }
+ 
+ MACHINE_START(NSLU2, "Linksys NSLU2")
diff --git a/target/linux/ixp4xx/patches-2.6.24/032-ixp4xx-net-drivers-nas100d.patch b/target/linux/ixp4xx/patches-2.6.24/032-ixp4xx-net-drivers-nas100d.patch
new file mode 100644
index 000000000..143473378
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/032-ixp4xx-net-drivers-nas100d.patch
@@ -0,0 +1,87 @@
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/nas100d-setup.c	2008-01-08 15:22:07.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c	2008-01-08 15:32:32.000000000 +1030
+@@ -21,6 +21,7 @@
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
++#include <asm/io.h>
+ 
+ static struct flash_platform_data nas100d_flash_data = {
+ 	.map_name		= "cfi_probe",
+@@ -125,12 +126,30 @@
+ 	.resource		= nas100d_uart_resources,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info nas100d_plat_eth[] = {
++        {
++                .phy            = 0,
++                .rxq            = 3,
++		.txreadyq	= 20,
++        }
++};
++
++static struct platform_device nas100d_eth[] = {
++        {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEB,
++                .dev.platform_data      = nas100d_plat_eth,
++        }
++};
++
+ static struct platform_device *nas100d_devices[] __initdata = {
+ 	&nas100d_i2c_gpio,
+ 	&nas100d_flash,
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&nas100d_leds,
+ #endif
++	&nas100d_eth[0],
+ };
+ 
+ static void nas100d_power_off(void)
+@@ -146,6 +165,9 @@
+ 
+ static void __init nas100d_init(void)
+ {
++	uint8_t __iomem *f;
++	int i;
++
+ 	ixp4xx_sys_init();
+ 
+ 	/* gpio 14 and 15 are _not_ clocks */
+@@ -165,6 +187,33 @@
+ 	(void)platform_device_register(&nas100d_uart);
+ 
+ 	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
++
++
++	/*
++	 * Map in a portion of the flash and read the MAC address.
++	 * Since it is stored in BE in the flash itself, we need to
++	 * byteswap it if we're in LE mode.
++	 */
++	if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000))) {
++#ifdef __ARMEB__
++		for (i = 0; i < 6; i++) {
++			nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i);
++		}
++#else
++		nas100d_plat_eth[0].hwaddr[0] = readb(f + 0xFC0FD8 + 3);
++		nas100d_plat_eth[0].hwaddr[1] = readb(f + 0xFC0FD8 + 2);
++		nas100d_plat_eth[0].hwaddr[2] = readb(f + 0xFC0FD8 + 1);
++		nas100d_plat_eth[0].hwaddr[3] = readb(f + 0xFC0FD8 + 0);
++		nas100d_plat_eth[0].hwaddr[4] = readb(f + 0xFC0FD8 + 7);
++		nas100d_plat_eth[0].hwaddr[5] = readb(f + 0xFC0FD8 + 6);
++#endif
++		iounmap(f);
++	}
++	printk(KERN_INFO "NAS100D: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
++	       nas100d_plat_eth[0].hwaddr[0], nas100d_plat_eth[0].hwaddr[1],
++	       nas100d_plat_eth[0].hwaddr[2], nas100d_plat_eth[0].hwaddr[3],
++	       nas100d_plat_eth[0].hwaddr[4], nas100d_plat_eth[0].hwaddr[5]);
++
+ }
+ 
+ MACHINE_START(NAS100D, "Iomega NAS 100d")
diff --git a/target/linux/ixp4xx/patches-2.6.24/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-2.6.24/090-increase_entropy_pools.patch
new file mode 100644
index 000000000..9a322a714
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/090-increase_entropy_pools.patch
@@ -0,0 +1,17 @@
+Index: linux-2.6.19/drivers/char/random.c
+===================================================================
+--- linux-2.6.19.orig/drivers/char/random.c
++++ linux-2.6.19/drivers/char/random.c
+@@ -248,9 +248,9 @@
+ /*
+  * Configuration information
+  */
+-#define INPUT_POOL_WORDS 128
+-#define OUTPUT_POOL_WORDS 32
+-#define SEC_XFER_SIZE 512
++#define INPUT_POOL_WORDS 256
++#define OUTPUT_POOL_WORDS 64
++#define SEC_XFER_SIZE 1024
+ 
+ /*
+  * The minimum number of bits of entropy before we wake up a read on
diff --git a/target/linux/ixp4xx/patches-2.6.24/091-nslu2_rtc_fixup.patch b/target/linux/ixp4xx/patches-2.6.24/091-nslu2_rtc_fixup.patch
new file mode 100644
index 000000000..49ca1e2dc
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/091-nslu2_rtc_fixup.patch
@@ -0,0 +1,55 @@
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/nslu2-setup.c linux-2.6.23/arch/arm/mach-ixp4xx/nslu2-setup.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/nslu2-setup.c	2007-10-09 15:31:38.000000000 -0500
++++ linux-2.6.23/arch/arm/mach-ixp4xx/nslu2-setup.c	2007-10-11 01:04:46.000000000 -0500
+@@ -19,6 +19,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+ 
++#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -171,6 +172,35 @@ static struct sys_timer nslu2_timer = {
+     .init   = nslu2_timer_init,
+ };
+ 
++static char nslu2_rtc_probe[] __initdata = "rtc-isl1208.ignore=0,0x6f rtc-x1205.probe=0,0x6f ";
++
++static void __init nslu2_fixup(struct machine_desc *desc,
++                struct tag *tags, char **cmdline, struct meminfo *mi)
++{
++    struct tag *t = tags;
++    char *p = *cmdline;
++
++    /* Find the end of the tags table, taking note of any cmdline tag. */
++    for (; t->hdr.size; t = tag_next(t)) {
++        if (t->hdr.tag == ATAG_CMDLINE) {
++            p = t->u.cmdline.cmdline;
++        }
++    }
++
++    /* Overwrite the end of the table with a new cmdline tag. */
++    t->hdr.tag = ATAG_CMDLINE;
++    t->hdr.size = (sizeof (struct tag_header) +
++        strlen(nslu2_rtc_probe) + strlen(p) + 1 + 4) >> 2;
++    strlcpy(t->u.cmdline.cmdline, nslu2_rtc_probe, COMMAND_LINE_SIZE);
++    strlcpy(t->u.cmdline.cmdline + strlen(nslu2_rtc_probe), p,
++        COMMAND_LINE_SIZE - strlen(nslu2_rtc_probe));
++
++    /* Terminate the table. */
++    t = tag_next(t);
++    t->hdr.tag = ATAG_NONE;
++    t->hdr.size = 0;
++}
++
+ static void __init nslu2_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -196,6 +226,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ 	.boot_params	= 0x00000100,
++	.fixup          = nslu2_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer          = &nslu2_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.24/092-nas100d_rtc_fixup.patch b/target/linux/ixp4xx/patches-2.6.24/092-nas100d_rtc_fixup.patch
new file mode 100644
index 000000000..a6fda8627
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/092-nas100d_rtc_fixup.patch
@@ -0,0 +1,55 @@
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/nas100d-setup.c linux-2.6.23/arch/arm/mach-ixp4xx/nas100d-setup.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/nas100d-setup.c	2007-10-09 15:31:38.000000000 -0500
++++ linux-2.6.23/arch/arm/mach-ixp4xx/nas100d-setup.c	2007-10-11 01:06:33.000000000 -0500
+@@ -17,6 +17,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+ 
++#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -142,6 +143,35 @@ static void nas100d_power_off(void)
+ 	gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
+ }
+ 
++static char nas100d_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
++
++static void __init nas100d_fixup(struct machine_desc *desc,
++                struct tag *tags, char **cmdline, struct meminfo *mi)
++{
++    struct tag *t = tags;
++    char *p = *cmdline;
++
++    /* Find the end of the tags table, taking note of any cmdline tag. */
++    for (; t->hdr.size; t = tag_next(t)) {
++        if (t->hdr.tag == ATAG_CMDLINE) {
++            p = t->u.cmdline.cmdline;
++        }
++    }
++
++    /* Overwrite the end of the table with a new cmdline tag. */
++    t->hdr.tag = ATAG_CMDLINE;
++    t->hdr.size = (sizeof (struct tag_header) +
++        strlen(nas100d_rtc_probe) + strlen(p) + 1 + 4) >> 2;
++    strlcpy(t->u.cmdline.cmdline, nas100d_rtc_probe, COMMAND_LINE_SIZE);
++    strlcpy(t->u.cmdline.cmdline + strlen(nas100d_rtc_probe), p,
++        COMMAND_LINE_SIZE - strlen(nas100d_rtc_probe));
++
++    /* Terminate the table. */
++    t = tag_next(t);
++    t->hdr.tag = ATAG_NONE;
++    t->hdr.size = 0;
++}
++
+ static void __init nas100d_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -170,6 +200,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d"
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ 	.boot_params	= 0x00000100,
++	.fixup          = nas100d_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer          = &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.24/095-dsmg600_rtc_fixup.patch b/target/linux/ixp4xx/patches-2.6.24/095-dsmg600_rtc_fixup.patch
new file mode 100644
index 000000000..3d1350115
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/095-dsmg600_rtc_fixup.patch
@@ -0,0 +1,56 @@
+Index: linux-2.6.22-rc4-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c
+===================================================================
+--- linux-2.6.22-rc4-armeb.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
++++ linux-2.6.22-rc4-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c
+@@ -16,6 +16,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/i2c-gpio.h>
+ 
++#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -145,6 +146,35 @@ static struct sys_timer dsmg600_timer = 
+     .init   = dsmg600_timer_init,
+ };
+ 
++static char dsmg600_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
++
++static void __init dsmg600_fixup(struct machine_desc *desc,
++                struct tag *tags, char **cmdline, struct meminfo *mi)
++{
++    struct tag *t = tags;
++    char *p = *cmdline;
++
++    /* Find the end of the tags table, taking note of any cmdline tag. */
++    for (; t->hdr.size; t = tag_next(t)) {
++        if (t->hdr.tag == ATAG_CMDLINE) {
++            p = t->u.cmdline.cmdline;
++        }
++    }
++
++    /* Overwrite the end of the table with a new cmdline tag. */
++    t->hdr.tag = ATAG_CMDLINE;
++    t->hdr.size = (sizeof (struct tag_header) +
++        strlen(dsmg600_rtc_probe) + strlen(p) + 1 + 4) >> 2;
++    strlcpy(t->u.cmdline.cmdline, dsmg600_rtc_probe, COMMAND_LINE_SIZE);
++    strlcpy(t->u.cmdline.cmdline + strlen(dsmg600_rtc_probe), p,
++        COMMAND_LINE_SIZE - strlen(dsmg600_rtc_probe));
++
++    /* Terminate the table. */
++    t = tag_next(t);
++    t->hdr.tag = ATAG_NONE;
++    t->hdr.size = 0;
++}
++
+ static void __init dsmg600_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -177,6 +207,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ 	.boot_params	= 0x00000100,
++	.fixup          = dsmg600_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer          = &dsmg600_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.24/100-gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/100-gateway7001_mac_plat_info.patch
new file mode 100644
index 000000000..c7169ce2f
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/100-gateway7001_mac_plat_info.patch
@@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/gateway7001-setup.c	2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c	2007-10-22 15:09:33.000000000 +0200
+@@ -76,9 +76,36 @@
+ 	.resource	= &gateway7001_uart_resource,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info gateway7001_plat_eth[] = {
++        {
++                .phy            = 1,
++                .rxq            = 3,
++		.txreadyq	= 20,
++        }, {
++                .phy            = 2,
++                .rxq            = 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device gateway7001_eth[] = {
++        {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEB,
++                .dev.platform_data      = gateway7001_plat_eth,
++        }, {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEC,
++                .dev.platform_data      = gateway7001_plat_eth + 1,
++	}
++};
++
+ static struct platform_device *gateway7001_devices[] __initdata = {
+ 	&gateway7001_flash,
+-	&gateway7001_uart
++	&gateway7001_uart,
++	&gateway7001_eth[0],
++	&gateway7001_eth[1],
+ };
+ 
+ static void __init gateway7001_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/101-wg302_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/101-wg302_mac_plat_info.patch
new file mode 100644
index 000000000..5209e72d5
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/101-wg302_mac_plat_info.patch
@@ -0,0 +1,31 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wg302v2-setup.c	2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c	2007-10-22 15:02:20.000000000 +0200
+@@ -77,9 +77,27 @@
+ 	.resource	= &wg302v2_uart_resource,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info wg302_plat_eth[] = {
++	{
++		.phy		= 8,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}
++};
++
++static struct platform_device wg302_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= wg302_plat_eth,
++	}
++};
++
+ static struct platform_device *wg302v2_devices[] __initdata = {
+ 	&wg302v2_flash,
+ 	&wg302v2_uart,
++	&wg302_eth[0],
+ };
+ 
+ static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch b/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch
new file mode 100644
index 000000000..80115b840
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch
@@ -0,0 +1,297 @@
+Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.23.12.orig/arch/arm/mach-ixp4xx/Kconfig	2008-01-05 13:30:14.000000000 +1030
++++ linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig	2008-01-05 13:37:05.000000000 +1030
+@@ -57,6 +57,14 @@
+ 	  WG302 v2 or WAG302 v2 Access Points. For more information
+ 	  on this platform, see http://openwrt.org
+ 
++config MACH_PRONGHORNMETRO
++	bool "Pronghorn Metro"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the ADI 
++	  Engineering Pronghorn Metro Platform. For more
++	  information on this platform, see <file:Documentation/arm/IXP4xx>.
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.23.12.orig/arch/arm/mach-ixp4xx/Makefile	2008-01-05 13:32:45.000000000 +1030
++++ linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile	2008-01-05 13:37:37.000000000 +1030
+@@ -16,6 +16,7 @@
+ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
++obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -30,5 +31,6 @@
+ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o fsg-power.o
++obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-pci.c	2008-01-05 13:37:05.000000000 +1030
+@@ -0,0 +1,74 @@
++/*
++ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
++ *
++ * PCI setup routines for ADI Engineering Pronghorn Metro
++ *
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init pronghornmetro_pci_preinit(void)
++{
++	set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW);
++	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
++	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
++	set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 13)
++		return IRQ_IXP4XX_GPIO4;
++	else if (slot == 14)
++		return IRQ_IXP4XX_GPIO6;
++	else if (slot == 15)
++		return IRQ_IXP4XX_GPIO11;
++	else if (slot == 16)
++		return IRQ_IXP4XX_GPIO1;
++	else return -1;
++}
++
++struct hw_pci pronghornmetro_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        pronghornmetro_pci_preinit,
++	.swizzle =        pci_std_swizzle,
++	.setup =          ixp4xx_setup,
++	.scan =           ixp4xx_scan_bus,
++	.map_irq =        pronghornmetro_map_irq,
++};
++
++int __init pronghornmetro_pci_init(void)
++{
++	if (machine_is_pronghorn_metro())
++		pci_common_init(&pronghornmetro_pci);
++	return 0;
++}
++
++subsys_initcall(pronghornmetro_pci_init);
+Index: linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.12/arch/arm/mach-ixp4xx/pronghornmetro-setup.c	2008-01-05 13:37:05.000000000 +1030
+@@ -0,0 +1,147 @@
++/*
++ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
++ *
++ * Board setup for the ADI Engineering Pronghorn Metro
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data pronghornmetro_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource pronghornmetro_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device pronghornmetro_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &pronghornmetro_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &pronghornmetro_flash_resource,
++};
++
++static struct resource pronghornmetro_uart_resource = {
++	.start	= IXP4XX_UART2_BASE_PHYS,
++	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port pronghornmetro_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device pronghornmetro_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= pronghornmetro_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &pronghornmetro_uart_resource,
++};
++
++static struct resource pronghornmetro_pata_resources[] = {
++	{
++		.flags	= IORESOURCE_MEM
++	},
++	{
++		.flags	= IORESOURCE_MEM,
++	},
++	{
++		.name	= "intrq",
++		.start	= IRQ_IXP4XX_GPIO0,
++		.end	= IRQ_IXP4XX_GPIO0,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct ixp4xx_pata_data pronghornmetro_pata_data = {
++	.cs0_bits	= 0xbfff0043,
++	.cs1_bits	= 0xbfff0043,
++};
++
++static struct platform_device pronghornmetro_pata = {
++	.name			= "pata_ixp4xx_cf",
++	.id			= 0,
++	.dev.platform_data      = &pronghornmetro_pata_data,
++	.num_resources		= ARRAY_SIZE(pronghornmetro_pata_resources),
++	.resource		= pronghornmetro_pata_resources,
++};
++
++static struct platform_device *pronghornmetro_devices[] __initdata = {
++	&pronghornmetro_flash,
++	&pronghornmetro_uart,
++};
++
++static void __init pronghornmetro_init(void)
++{
++	ixp4xx_sys_init();
++
++	pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
++
++	pronghornmetro_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
++	pronghornmetro_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
++
++	pronghornmetro_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
++	pronghornmetro_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
++
++	pronghornmetro_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
++	pronghornmetro_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
++
++	platform_device_register(&pronghornmetro_pata);
++}
++
++#ifdef CONFIG_MACH_PRONGHORNMETRO
++MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
++	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.timer		= &ixp4xx_timer,
++	.boot_params	= 0x0100,
++	.init_machine	= pronghornmetro_init,
++MACHINE_END
++#endif
+Index: linux-2.6.23.12/Documentation/arm/IXP4xx
+===================================================================
+--- linux-2.6.23.12.orig/Documentation/arm/IXP4xx	2008-01-05 13:30:14.000000000 +1030
++++ linux-2.6.23.12/Documentation/arm/IXP4xx	2008-01-05 13:37:05.000000000 +1030
+@@ -111,6 +111,9 @@
+    the platform has two mini-PCI slots used for 802.11[bga] cards.
+    Finally, there is an IDE port hanging off the expansion bus.
+ 
++ADI Engineering Pronghorn Metro Platform
++http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85
++
+ Gateworks Avila Network Platform
+ http://www.gateworks.com/avila_sbc.htm
+ 
+Index: linux-2.6.23.12/include/asm-arm/arch-ixp4xx/uncompress.h
+===================================================================
+--- linux-2.6.23.12.orig/include/asm-arm/arch-ixp4xx/uncompress.h	2008-01-05 13:30:14.000000000 +1030
++++ linux-2.6.23.12/include/asm-arm/arch-ixp4xx/uncompress.h	2008-01-05 13:37:05.000000000 +1030
+@@ -41,7 +41,8 @@
+ 	 * Some boards are using UART2 as console
+ 	 */
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+-			 machine_is_gateway7001() || machine_is_wg302v2())
++			 machine_is_gateway7001() || machine_is_wg302v2() ||
++			 machine_is_pronghorn_metro())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.24/111-pronghorn_metro_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/111-pronghorn_metro_mac_plat_info.patch
new file mode 100644
index 000000000..2fb376982
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/111-pronghorn_metro_mac_plat_info.patch
@@ -0,0 +1,40 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-setup.c	2007-10-22 15:41:27.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c	2007-10-22 15:43:30.000000000 +0200
+@@ -104,9 +104,36 @@
+ 	.resource		= pronghornmetro_pata_resources,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info pronghornmetro_plat_eth[] = {
++        {
++                .phy            = 0,
++                .rxq            = 3,
++		.txreadyq	= 20,
++        }, {
++                .phy            = 1,
++                .rxq            = 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device pronghornmetro_eth[] = {
++        {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEB,
++                .dev.platform_data      = pronghornmetro_plat_eth,
++        }, {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEC,
++                .dev.platform_data      = pronghornmetro_plat_eth + 1,
++	}
++};
++
+ static struct platform_device *pronghornmetro_devices[] __initdata = {
+ 	&pronghornmetro_flash,
+ 	&pronghornmetro_uart,
++	&pronghornmetro_eth[0],
++	&pronghornmetro_eth[1],
+ };
+ 
+ static void __init pronghornmetro_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch
new file mode 100644
index 000000000..2488cb49d
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch
@@ -0,0 +1,185 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 18:03:34.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 18:22:41.000000000 +0200
+@@ -65,6 +65,14 @@
+ 	  Engineering Pronghorn Metro Platform. For more
+ 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+ 
++config MACH_COMPEX
++	bool "Compex WP18 / NP18A"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Compex' 
++	  WP18 or NP18A boards. For more information on this
++	  platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile	2007-10-23 18:03:34.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile	2007-10-23 18:22:41.000000000 +0200
+@@ -17,6 +17,7 @@
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
++obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -32,6 +33,7 @@
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
++obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c	2007-10-23 18:22:41.000000000 +0200
+@@ -0,0 +1,120 @@
++/*
++ * arch/arm/mach-ixp4xx/compex-setup.c
++ *
++ * Ccompex WP18 / NP18A board-setup
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on ixdp425-setup.c:
++ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data compex_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource compex_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device compex_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &compex_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &compex_flash_resource,
++};
++
++static struct resource compex_uart_resources[] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port compex_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device compex_uart = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= compex_uart_data,
++	.num_resources		= 2,
++	.resource		= compex_uart_resources,
++};
++
++static struct platform_device *compex_devices[] __initdata = {
++	&compex_flash,
++	&compex_uart
++};
++
++static void __init compex_init(void)
++{
++	ixp4xx_sys_init();
++
++	compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	compex_flash_resource.end =
++		IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
++}
++
++#ifdef CONFIG_MACH_COMPEX
++MACHINE_START(COMPEX, "Compex WP18 / NP18A")
++	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
++	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
++	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.timer		= &ixp4xx_timer,
++	.boot_params	= 0x0100,
++	.init_machine	= compex_init,
++MACHINE_END
++#endif
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-10-23 18:22:41.000000000 +0200
+@@ -66,7 +66,7 @@
+ int __init ixdp425_pci_init(void)
+ {
+ 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+-			machine_is_ixdp465() || machine_is_kixrp435())
++			machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
+ 		pci_common_init(&ixdp425_pci);
+ 	return 0;
+ }
+diff -Nur linux-2.6.23/arch/arm/tools/mach-types linux-2.6.23-owrt/arch/arm/tools/mach-types
+--- linux-2.6.23/arch/arm/tools/mach-types	2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/tools/mach-types	2007-10-23 18:22:41.000000000 +0200
+@@ -1278,7 +1278,7 @@
+ smdk6400		MACH_SMDK6400		SMDK6400		1270
+ nokia_n800		MACH_NOKIA_N800		NOKIA_N800		1271
+ greenphone		MACH_GREENPHONE		GREENPHONE		1272
+-compex42x		MACH_COMPEXWP18		COMPEXWP18		1273
++compex			MACH_COMPEX		COMPEX			1273
+ xmate			MACH_XMATE		XMATE			1274
+ energizer		MACH_ENERGIZER		ENERGIZER		1275
+ ime1			MACH_IME1		IME1			1276
diff --git a/target/linux/ixp4xx/patches-2.6.24/121-compex_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/121-compex_mac_plat_info.patch
new file mode 100644
index 000000000..081349ad3
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/121-compex_mac_plat_info.patch
@@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c	2007-10-23 18:39:29.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c	2007-10-23 18:45:34.000000000 +0200
+@@ -90,9 +90,36 @@
+ 	.resource		= compex_uart_resources,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info compex_plat_eth[] = {
++	{
++		.phy		= -1,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 3,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device compex_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= compex_plat_eth,
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= compex_plat_eth + 1,
++	}
++};
++
+ static struct platform_device *compex_devices[] __initdata = {
+ 	&compex_flash,
+-	&compex_uart
++	&compex_uart,
++	&compex_eth[0],
++	&compex_eth[1],
+ };
+ 
+ static void __init compex_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch
new file mode 100644
index 000000000..78e525d30
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch
@@ -0,0 +1,230 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 18:39:29.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 19:11:31.000000000 +0200
+@@ -73,6 +73,14 @@
+ 	  WP18 or NP18A boards. For more information on this
+ 	  platform, see http://openwrt.org
+ 
++config MACH_WRT300NV2
++	bool "Linksys WRT300N v2"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Linksys' 
++	  WRT300N v2 router. For more information on this
++	  platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile	2007-10-23 18:39:29.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile	2007-10-23 19:11:31.000000000 +0200
+@@ -18,6 +18,7 @@
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
++obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -34,6 +35,7 @@
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+ obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
++obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-pci.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c	2007-10-23 19:11:31.000000000 +0200
+@@ -0,0 +1,65 @@
++/*
++ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
++ *
++ * PCI setup routines for Linksys WRT300N v2
++ *
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init wrt300nv2_pci_preinit(void)
++{
++	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO8;
++	else return -1;
++}
++
++struct hw_pci wrt300nv2_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        wrt300nv2_pci_preinit,
++	.swizzle =        pci_std_swizzle,
++	.setup =          ixp4xx_setup,
++	.scan =           ixp4xx_scan_bus,
++	.map_irq =        wrt300nv2_map_irq,
++};
++
++int __init wrt300nv2_pci_init(void)
++{
++	if (machine_is_wrt300nv2())
++		pci_common_init(&wrt300nv2_pci);
++	return 0;
++}
++
++subsys_initcall(wrt300nv2_pci_init);
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	2007-10-23 19:11:31.000000000 +0200
+@@ -0,0 +1,108 @@
++/*
++ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++ *
++ * Board setup for the Linksys WRT300N v2
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data wrt300nv2_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource wrt300nv2_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device wrt300nv2_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &wrt300nv2_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &wrt300nv2_flash_resource,
++};
++
++static struct resource wrt300nv2_uart_resource = {
++	.start	= IXP4XX_UART2_BASE_PHYS,
++	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port wrt300nv2_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device wrt300nv2_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= wrt300nv2_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &wrt300nv2_uart_resource,
++};
++
++static struct platform_device *wrt300nv2_devices[] __initdata = {
++	&wrt300nv2_flash,
++	&wrt300nv2_uart
++};
++
++static void __init wrt300nv2_init(void)
++{
++	ixp4xx_sys_init();
++
++	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
++}
++
++#ifdef CONFIG_MACH_WRT300NV2
++MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
++	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.timer		= &ixp4xx_timer,
++	.boot_params	= 0x0100,
++	.init_machine	= wrt300nv2_init,
++MACHINE_END
++#endif
+diff -Nur linux-2.6.23/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.23-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
+--- linux-2.6.23/include/asm-arm/arch-ixp4xx/uncompress.h	2007-10-23 18:03:35.000000000 +0200
++++ linux-2.6.23-owrt/include/asm-arm/arch-ixp4xx/uncompress.h	2007-10-23 19:12:30.000000000 +0200
+@@ -42,7 +42,7 @@
+ 	 */
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ 			 machine_is_gateway7001() || machine_is_wg302v2() ||
+-			 machine_is_pronghorn_metro())
++			 machine_is_pronghorn_metro() || machine_is_wrt300nv2())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.24/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/131-wrt300nv2_mac_plat_info.patch
new file mode 100644
index 000000000..24dad0aea
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/131-wrt300nv2_mac_plat_info.patch
@@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	2007-10-23 19:20:08.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	2007-10-23 19:22:19.000000000 +0200
+@@ -76,9 +76,36 @@
+ 	.resource	= &wrt300nv2_uart_resource,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info wrt300nv2_plat_eth[] = {
++	{
++		.phy		= -1,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 1,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device wrt300nv2_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= wrt300nv2_plat_eth,
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= wrt300nv2_plat_eth + 1,
++	}
++};
++
+ static struct platform_device *wrt300nv2_devices[] __initdata = {
+ 	&wrt300nv2_flash,
+-	&wrt300nv2_uart
++	&wrt300nv2_uart,
++	&wrt300nv2_eth[0],
++	&wrt300nv2_eth[1],
+ };
+ 
+ static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/140-sidewinder_support.patch b/target/linux/ixp4xx/patches-2.6.24/140-sidewinder_support.patch
new file mode 100644
index 000000000..48d567f6f
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/140-sidewinder_support.patch
@@ -0,0 +1,240 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 19:20:08.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 19:26:46.000000000 +0200
+@@ -65,6 +65,14 @@
+ 	  Engineering Pronghorn Metro Platform. For more
+ 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+ 
++config MACH_SIDEWINDER
++	bool "Sidewinder"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support the ADI 
++	  Engineering Sidewinder Platform. For more
++	  information on this platform, see <file:Documentation/arm/IXP4xx>.
++
+ config MACH_COMPEX
+ 	bool "Compex WP18 / NP18A"
+ 	select PCI
+@@ -163,7 +171,7 @@
+ #
+ config CPU_IXP46X
+ 	bool
+-	depends on MACH_IXDP465
++	depends on MACH_IXDP465 || MACH_SIDEWINDER
+ 	default y
+ 
+ config CPU_IXP43X
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile	2007-10-23 19:20:08.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile	2007-10-23 19:23:52.000000000 +0200
+@@ -19,6 +19,7 @@
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
++obj-pci-$(CONFIG_MACH_SIDEWINDER)		+= sidewinder-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -36,6 +37,7 @@
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+ obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
++obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-pci.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-pci.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-pci.c	2007-10-23 19:23:52.000000000 +0200
+@@ -0,0 +1,71 @@
++/*
++ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
++ *
++ * PCI setup routines for ADI Engineering Sidewinder
++ *
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init sidewinder_pci_preinit(void)
++{
++	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
++	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
++	set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init sidewinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO11;
++	else if (slot == 2)
++		return IRQ_IXP4XX_GPIO10;
++	else if (slot == 3)
++		return IRQ_IXP4XX_GPIO9;
++	else return -1;
++}
++
++struct hw_pci sidewinder_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        sidewinder_pci_preinit,
++	.swizzle =        pci_std_swizzle,
++	.setup =          ixp4xx_setup,
++	.scan =           ixp4xx_scan_bus,
++	.map_irq =        sidewinder_map_irq,
++};
++
++int __init sidewinder_pci_init(void)
++{
++	if (machine_is_sidewinder())
++		pci_common_init(&sidewinder_pci);
++	return 0;
++}
++
++subsys_initcall(sidewinder_pci_init);
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-setup.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-setup.c	2007-10-23 19:23:52.000000000 +0200
+@@ -0,0 +1,115 @@
++/*
++ * arch/arm/mach-ixp4xx/sidewinder-setup.c
++ *
++ * Board setup for the ADI Engineering Sidewinder
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data sidewinder_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource sidewinder_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device sidewinder_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &sidewinder_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &sidewinder_flash_resource,
++};
++
++static struct resource sidewinder_uart_resources[] = {
++	{
++	.start	= IXP4XX_UART1_BASE_PHYS,
++	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++	},
++	{
++	.start	= IXP4XX_UART2_BASE_PHYS,
++	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++	}
++};
++
++static struct plat_serial8250_port sidewinder_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device sidewinder_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= sidewinder_uart_data,
++	},
++	.num_resources	= 2,
++	.resource	= &sidewinder_uart_resources,
++};
++
++static struct platform_device *sidewinder_devices[] __initdata = {
++	&sidewinder_flash,
++	&sidewinder_uart,
++};
++
++static void __init sidewinder_init(void)
++{
++	ixp4xx_sys_init();
++
++	sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
++}
++
++#ifdef CONFIG_MACH_SIDEWINDER
++MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
++	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.timer		= &ixp4xx_timer,
++	.boot_params	= 0x0100,
++	.init_machine	= sidewinder_init,
++MACHINE_END
++#endif
diff --git a/target/linux/ixp4xx/patches-2.6.24/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.24/150-lanready_ap1000_support.patch
new file mode 100644
index 000000000..4070da1d0
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/150-lanready_ap1000_support.patch
@@ -0,0 +1,212 @@
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c	2007-11-14 13:58:58.000000000 +0100
+@@ -0,0 +1,151 @@
++/*
++ * arch/arm/mach-ixp4xx/ap1000-setup.c
++ *
++ * Lanready AP-1000
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on ixdp425-setup.c:
++ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data ap1000_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource ap1000_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device ap1000_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &ap1000_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &ap1000_flash_resource,
++};
++
++static struct resource ap1000_uart_resources[] = {
++	{
++		.start		= IXP4XX_UART1_BASE_PHYS,
++		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	},
++	{
++		.start		= IXP4XX_UART2_BASE_PHYS,
++		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
++		.flags		= IORESOURCE_MEM
++	}
++};
++
++static struct plat_serial8250_port ap1000_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{
++		.mapbase	= IXP4XX_UART2_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART2,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device ap1000_uart = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev.platform_data	= ap1000_uart_data,
++	.num_resources		= 2,
++	.resource		= ap1000_uart_resources
++};
++
++static struct platform_device *ap1000_devices[] __initdata = {
++	&ap1000_flash,
++	&ap1000_uart
++};
++
++static char ap1000_mem_fixup[] __initdata = "mem=64M ";
++
++static void __init ap1000_fixup(struct machine_desc *desc,
++		struct tag *tags, char **cmdline, struct meminfo *mi)
++
++{
++	struct tag *t = tags;
++	char *p = *cmdline;
++
++	/* Find the end of the tags table, taking note of any cmdline tag. */
++	for (; t->hdr.size; t = tag_next(t)) {
++		if (t->hdr.tag == ATAG_CMDLINE) {
++			p = t->u.cmdline.cmdline;
++		}
++	}
++
++	/* Overwrite the end of the table with a new cmdline tag. */
++	t->hdr.tag = ATAG_CMDLINE;
++	t->hdr.size = (sizeof (struct tag_header) +
++		strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
++	strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
++	strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
++		COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
++
++	/* Terminate the table. */
++	t = tag_next(t);
++	t->hdr.tag = ATAG_NONE;
++	t->hdr.size = 0;
++}
++
++static void __init ap1000_init(void)
++{
++	ixp4xx_sys_init();
++
++	ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	ap1000_flash_resource.end =
++		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++	platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
++}
++
++#ifdef CONFIG_MACH_AP1000
++MACHINE_START(AP1000, "Lanready AP-1000")
++	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
++	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
++	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++	.fixup		= ap1000_fixup,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.timer		= &ixp4xx_timer,
++	.boot_params	= 0x0100,
++	.init_machine	= ap1000_init,
++MACHINE_END
++#endif
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-11-14 13:15:50.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-11-14 13:27:16.000000000 +0100
+@@ -66,7 +66,8 @@
+ int __init ixdp425_pci_init(void)
+ {
+ 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+-			machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
++			machine_is_ixdp465() || machine_is_kixrp435() ||
++			machine_is_compex() || machine_is_ap1000())
+ 		pci_common_init(&ixdp425_pci);
+ 	return 0;
+ }
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/Kconfig	2007-11-14 13:15:50.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-11-14 13:25:07.000000000 +0100
+@@ -89,6 +89,14 @@
+ 	  WRT300N v2 router. For more information on this
+ 	  platform, see http://openwrt.org
+ 
++config MACH_AP1000
++	bool "Lanready AP-1000"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Lanready's
++	  AP1000 board. For more information on this
++	  platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/Makefile linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/Makefile	2007-11-14 13:15:50.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Makefile	2007-11-14 13:31:29.000000000 +0100
+@@ -20,6 +20,7 @@
+ obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_SIDEWINDER)		+= sidewinder-pci.o
++obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -38,5 +39,6 @@
+ obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
++obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+diff -Nur linux-2.6.23.1/arch/arm/tools/mach-types linux-2.6.23.1-owrt/arch/arm/tools/mach-types
+--- linux-2.6.23.1/arch/arm/tools/mach-types	2007-11-14 13:15:50.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/tools/mach-types	2007-11-14 13:26:06.000000000 +0100
+@@ -1367,3 +1367,4 @@
+ csb726			MACH_CSB726		CSB726			1359
+ tik27			MACH_TIK27		TIK27			1360
+ mx_uc7420		MACH_MX_UC7420		MX_UC7420		1361
++ap1000			MACH_AP1000		AP1000			1543
diff --git a/target/linux/ixp4xx/patches-2.6.24/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/151-lanready_ap1000_mac_plat_info.patch
new file mode 100644
index 000000000..4259ff971
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/151-lanready_ap1000_mac_plat_info.patch
@@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c	2007-11-14 14:11:10.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c	2007-11-14 14:09:30.000000000 +0100
+@@ -90,9 +90,36 @@
+ 	.resource		= ap1000_uart_resources
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info ap1000_plat_eth[] = {
++	{
++		.phy		= 4,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 5,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device ap1000_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= ap1000_plat_eth,
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= ap1000_plat_eth + 1,
++	}
++};
++
+ static struct platform_device *ap1000_devices[] __initdata = {
+ 	&ap1000_flash,
+-	&ap1000_uart
++	&ap1000_uart,
++	&ap1000_eth[0],
++	&ap1000_eth[1],
+ };
+ 
+ static char ap1000_mem_fixup[] __initdata = "mem=64M ";
diff --git a/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch
new file mode 100644
index 000000000..129e5ca8e
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch
@@ -0,0 +1,217 @@
+diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/Kconfig	2008-01-14 22:08:42.000000000 +0100
++++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Kconfig	2008-01-14 22:12:21.000000000 +0100
+@@ -49,6 +49,14 @@
+ 	  7001 Access Point. For more information on this platform,
+ 	  see http://openwrt.org
+ 
++config MACH_WG302V1
++	bool "Netgear WG302 v1 / WAG302 v1"
++	select PCI
++	help
++	  Say 'Y' here if you want your kernel to support Netgear's
++	  WG302 v1 or WAG302 v1 Access Points. For more information
++	  on this platform, see http://openwrt.org
++
+ config MACH_WG302V2
+ 	bool "Netgear WG302 v2 / WAG302 v2"
+ 	select PCI
+diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/Makefile	2008-01-14 22:08:42.000000000 +0100
++++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/Makefile	2008-01-14 22:11:47.000000000 +0100
+@@ -14,6 +14,7 @@
+ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
++obj-pci-$(CONFIG_MACH_WG302V1)		+= wg302v1-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+@@ -33,6 +34,7 @@
+ obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o nas100d-power.o
+ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
+ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
++obj-$(CONFIG_MACH_WG302V1)	+= wg302v1-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o fsg-power.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-pci.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-pci.c
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-pci.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-pci.c	2008-01-14 22:33:52.000000000 +0100
+@@ -0,0 +1,63 @@
++/*
++ * arch/arch/mach-ixp4xx/wg302v1-pci.c
++ *
++ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *	Copyright (C) 2002 Jungo Software Technologies.
++ *	Copyright (C) 2003 MontaVista Software, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init wg302v1_pci_preinit(void)
++{
++	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
++	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
++
++	ixp4xx_pci_preinit();
++}
++
++static int __init wg302v1_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++	if (slot == 1)
++		return IRQ_IXP4XX_GPIO8;
++	else if (slot == 2)
++		return IRQ_IXP4XX_GPIO10;
++	else return -1;
++}
++
++struct hw_pci wg302v1_pci __initdata = {
++	.nr_controllers = 1,
++	.preinit =        wg302v1_pci_preinit,
++	.swizzle =        pci_std_swizzle,
++	.setup =          ixp4xx_setup,
++	.scan =           ixp4xx_scan_bus,
++	.map_irq =        wg302v1_map_irq,
++};
++
++int __init wg302v1_pci_init(void)
++{
++	if (machine_is_wg302v1())
++		pci_common_init(&wg302v1_pci);
++	return 0;
++}
++
++subsys_initcall(wg302v1_pci_init);
+diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c	2008-01-14 23:04:01.000000000 +0100
+@@ -0,0 +1,109 @@
++/*
++ * arch/arm/mach-ixp4xx/wg302v1-setup.c
++ *
++ * Board setup for the Netgear WG302 v1 and WAG302 v1
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <kaloz@openwrt.org>
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data wg302v1_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++};
++
++static struct resource wg302v1_flash_resource = {
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device wg302v1_flash = {
++	.name		= "IXP4XX-Flash",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &wg302v1_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &wg302v1_flash_resource,
++};
++
++static struct resource wg302v1_uart_resource = {
++	.start	= IXP4XX_UART1_BASE_PHYS,
++	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port wg302v1_uart_data[] = {
++	{
++		.mapbase	= IXP4XX_UART1_BASE_PHYS,
++		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++		.irq		= IRQ_IXP4XX_UART1,
++		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++		.iotype		= UPIO_MEM,
++		.regshift	= 2,
++		.uartclk	= IXP4XX_UART_XTAL,
++	},
++	{ },
++};
++
++static struct platform_device wg302v1_uart = {
++	.name		= "serial8250",
++	.id		= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= wg302v1_uart_data,
++	},
++	.num_resources	= 1,
++	.resource	= &wg302v1_uart_resource,
++};
++
++static struct platform_device *wg302v1_devices[] __initdata = {
++	&wg302v1_flash,
++	&wg302v1_uart,
++};
++
++static void __init wg302v1_init(void)
++{
++	ixp4xx_sys_init();
++
++	wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++	wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++	platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
++}
++
++#ifdef CONFIG_MACH_WG302V1
++MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
++	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
++	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++	.map_io		= ixp4xx_map_io,
++	.init_irq	= ixp4xx_init_irq,
++	.timer		= &ixp4xx_timer,
++	.boot_params	= 0x0100,
++	.init_machine	= wg302v1_init,
++MACHINE_END
++#endif
diff --git a/target/linux/ixp4xx/patches-2.6.24/161-wg302v1_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/161-wg302v1_mac_plat_info.patch
new file mode 100644
index 000000000..250d85e6d
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/161-wg302v1_mac_plat_info.patch
@@ -0,0 +1,31 @@
+diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c	2008-01-14 23:06:42.000000000 +0100
++++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c	2008-01-14 23:03:16.000000000 +0100
+@@ -77,9 +77,27 @@
+ 	.resource	= &wg302v1_uart_resource,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info wg302_plat_eth[] = {
++	{
++		.phy		= 30,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}
++};
++
++static struct platform_device wg302_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= wg302_plat_eth,
++	}
++};
++
+ static struct platform_device *wg302v1_devices[] __initdata = {
+ 	&wg302v1_flash,
+ 	&wg302v1_uart,
++	&wg302_eth[0],
+ };
+ 
+ static void __init wg302v1_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-2.6.24/162-wg302v1_mem_fixup.patch
new file mode 100644
index 000000000..b370088ae
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/162-wg302v1_mem_fixup.patch
@@ -0,0 +1,48 @@
+diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c	2008-01-14 23:12:03.000000000 +0100
++++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c	2008-01-14 23:11:34.000000000 +0100
+@@ -100,6 +100,36 @@
+ 	&wg302_eth[0],
+ };
+ 
++static char wg302v1_mem_fixup[] __initdata = "mem=32M ";
++
++static void __init wg302v1_fixup(struct machine_desc *desc,
++		struct tag *tags, char **cmdline, struct meminfo *mi)
++
++{
++	struct tag *t = tags;
++	char *p = *cmdline;
++
++	/* Find the end of the tags table, taking note of any cmdline tag. */
++	for (; t->hdr.size; t = tag_next(t)) {
++		if (t->hdr.tag == ATAG_CMDLINE) {
++			p = t->u.cmdline.cmdline;
++		}
++	}
++
++	/* Overwrite the end of the table with a new cmdline tag. */
++	t->hdr.tag = ATAG_CMDLINE;
++	t->hdr.size = (sizeof (struct tag_header) +
++		strlen(wg302v1_mem_fixup) + strlen(p) + 1 + 4) >> 2;
++	strlcpy(t->u.cmdline.cmdline, wg302v1_mem_fixup, COMMAND_LINE_SIZE);
++	strlcpy(t->u.cmdline.cmdline + strlen(wg302v1_mem_fixup), p,
++		COMMAND_LINE_SIZE - strlen(wg302v1_mem_fixup));
++
++	/* Terminate the table. */
++	t = tag_next(t);
++	t->hdr.tag = ATAG_NONE;
++	t->hdr.size = 0;
++}
++
+ static void __init wg302v1_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -118,6 +148,7 @@
+ 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++	.fixup		= wg302v1_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.24/200-npe_driver.patch b/target/linux/ixp4xx/patches-2.6.24/200-npe_driver.patch
new file mode 100644
index 000000000..8be7af7b5
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/200-npe_driver.patch
@@ -0,0 +1,4050 @@
+diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
+index 4de432e..c4c810b 100644
+--- a/arch/arm/kernel/setup.c
++++ b/arch/arm/kernel/setup.c
+@@ -61,6 +61,7 @@ extern int root_mountflags;
+ extern void _stext, _text, _etext, __data_start, _edata, _end;
+ 
+ unsigned int processor_id;
++EXPORT_SYMBOL(processor_id);
+ unsigned int __machine_arch_type;
+ EXPORT_SYMBOL(__machine_arch_type);
+ 
+diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
+index 61b2dfc..e774447 100644
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -189,6 +189,20 @@ config IXP4XX_INDIRECT_PCI
+ 	  need to use the indirect method instead. If you don't know
+ 	  what you need, leave this option unselected.
+ 
++config IXP4XX_QMGR
++	tristate "IXP4xx Queue Manager support"
++	help
++	  This driver supports IXP4xx built-in hardware queue manager
++	  and is automatically selected by Ethernet and HSS drivers.
++
++config IXP4XX_NPE
++	tristate "IXP4xx Network Processor Engine support"
++	select HOTPLUG
++	select FW_LOADER
++	help
++	  This driver supports IXP4xx built-in network coprocessors
++	  and is automatically selected by Ethernet and HSS drivers.
++
+ endmenu
+ 
+ endif
+diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
+index 77e00ad..4bb97e1 100644
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -30,3 +30,5 @@ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
++obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
++obj-$(CONFIG_IXP4XX_NPE)	+= ixp4xx_npe.o
+diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
+index d5008d8..10b41c6 100644
+--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
+@@ -177,6 +177,31 @@ static struct platform_device ixdp425_uart = {
+ 	.resource		= ixdp425_uart_resources
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info ixdp425_plat_eth[] = {
++	{
++		.phy		= 0,
++		.rxq		= 3,
++		.txreadyq	= 20,
++	}, {
++		.phy		= 1,
++		.rxq		= 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device ixdp425_eth[] = {
++	{
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEB,
++		.dev.platform_data	= ixdp425_plat_eth,
++	}, {
++		.name			= "ixp4xx_eth",
++		.id			= IXP4XX_ETH_NPEC,
++		.dev.platform_data	= ixdp425_plat_eth + 1,
++	}
++};
++
+ static struct platform_device *ixdp425_devices[] __initdata = {
+ 	&ixdp425_i2c_controller,
+ 	&ixdp425_flash,
+@@ -184,7 +209,9 @@ static struct platform_device *ixdp425_devices[] __initdata = {
+     defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+ 	&ixdp425_flash_nand,
+ #endif
+-	&ixdp425_uart
++	&ixdp425_uart,
++	&ixdp425_eth[0],
++	&ixdp425_eth[1],
+ };
+ 
+ static void __init ixdp425_init(void)
+diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+new file mode 100644
+index 0000000..83c137e
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+@@ -0,0 +1,741 @@
++/*
++ * Intel IXP4xx Network Processor Engine driver for Linux
++ *
++ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ *
++ * The code is based on publicly available information:
++ * - Intel IXP4xx Developer's Manual and other e-papers
++ * - Intel IXP400 Access Library Software (BSD license)
++ * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *   Thanks, Christian.
++ */
++
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/firmware.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <asm/arch/npe.h>
++
++#define DEBUG_MSG			0
++#define DEBUG_FW			0
++
++#define NPE_COUNT			3
++#define MAX_RETRIES			1000	/* microseconds */
++#define NPE_42X_DATA_SIZE		0x800	/* in dwords */
++#define NPE_46X_DATA_SIZE		0x1000
++#define NPE_A_42X_INSTR_SIZE		0x1000
++#define NPE_B_AND_C_42X_INSTR_SIZE	0x800
++#define NPE_46X_INSTR_SIZE		0x1000
++#define REGS_SIZE			0x1000
++
++#define NPE_PHYS_REG			32
++
++#define FW_MAGIC			0xFEEDF00D
++#define FW_BLOCK_TYPE_INSTR		0x0
++#define FW_BLOCK_TYPE_DATA		0x1
++#define FW_BLOCK_TYPE_EOF		0xF
++
++/* NPE exec status (read) and command (write) */
++#define CMD_NPE_STEP			0x01
++#define CMD_NPE_START			0x02
++#define CMD_NPE_STOP			0x03
++#define CMD_NPE_CLR_PIPE		0x04
++#define CMD_CLR_PROFILE_CNT		0x0C
++#define CMD_RD_INS_MEM			0x10 /* instruction memory */
++#define CMD_WR_INS_MEM			0x11
++#define CMD_RD_DATA_MEM			0x12 /* data memory */
++#define CMD_WR_DATA_MEM			0x13
++#define CMD_RD_ECS_REG			0x14 /* exec access register */
++#define CMD_WR_ECS_REG			0x15
++
++#define STAT_RUN			0x80000000
++#define STAT_STOP			0x40000000
++#define STAT_CLEAR			0x20000000
++#define STAT_ECS_K			0x00800000 /* pipeline clean */
++
++#define NPE_STEVT			0x1B
++#define NPE_STARTPC			0x1C
++#define NPE_REGMAP			0x1E
++#define NPE_CINDEX			0x1F
++
++#define INSTR_WR_REG_SHORT		0x0000C000
++#define INSTR_WR_REG_BYTE		0x00004000
++#define INSTR_RD_FIFO			0x0F888220
++#define INSTR_RESET_MBOX		0x0FAC8210
++
++#define ECS_BG_CTXT_REG_0		0x00 /* Background Executing Context */
++#define ECS_BG_CTXT_REG_1		0x01 /*		Stack level */
++#define ECS_BG_CTXT_REG_2		0x02
++#define ECS_PRI_1_CTXT_REG_0		0x04 /* Priority 1 Executing Context */
++#define ECS_PRI_1_CTXT_REG_1		0x05 /*		Stack level */
++#define ECS_PRI_1_CTXT_REG_2		0x06
++#define ECS_PRI_2_CTXT_REG_0		0x08 /* Priority 2 Executing Context */
++#define ECS_PRI_2_CTXT_REG_1		0x09 /*		Stack level */
++#define ECS_PRI_2_CTXT_REG_2		0x0A
++#define ECS_DBG_CTXT_REG_0		0x0C /* Debug Executing Context */
++#define ECS_DBG_CTXT_REG_1		0x0D /*		Stack level */
++#define ECS_DBG_CTXT_REG_2		0x0E
++#define ECS_INSTRUCT_REG		0x11 /* NPE Instruction Register */
++
++#define ECS_REG_0_ACTIVE		0x80000000 /* all levels */
++#define ECS_REG_0_NEXTPC_MASK		0x1FFF0000 /* BG/PRI1/PRI2 levels */
++#define ECS_REG_0_LDUR_BITS		8
++#define ECS_REG_0_LDUR_MASK		0x00000700 /* all levels */
++#define ECS_REG_1_CCTXT_BITS		16
++#define ECS_REG_1_CCTXT_MASK		0x000F0000 /* all levels */
++#define ECS_REG_1_SELCTXT_BITS		0
++#define ECS_REG_1_SELCTXT_MASK		0x0000000F /* all levels */
++#define ECS_DBG_REG_2_IF		0x00100000 /* debug level */
++#define ECS_DBG_REG_2_IE		0x00080000 /* debug level */
++
++/* NPE watchpoint_fifo register bit */
++#define WFIFO_VALID			0x80000000
++
++/* NPE messaging_status register bit definitions */
++#define MSGSTAT_OFNE	0x00010000 /* OutFifoNotEmpty */
++#define MSGSTAT_IFNF	0x00020000 /* InFifoNotFull */
++#define MSGSTAT_OFNF	0x00040000 /* OutFifoNotFull */
++#define MSGSTAT_IFNE	0x00080000 /* InFifoNotEmpty */
++#define MSGSTAT_MBINT	0x00100000 /* Mailbox interrupt */
++#define MSGSTAT_IFINT	0x00200000 /* InFifo interrupt */
++#define MSGSTAT_OFINT	0x00400000 /* OutFifo interrupt */
++#define MSGSTAT_WFINT	0x00800000 /* WatchFifo interrupt */
++
++/* NPE messaging_control register bit definitions */
++#define MSGCTL_OUT_FIFO			0x00010000 /* enable output FIFO */
++#define MSGCTL_IN_FIFO			0x00020000 /* enable input FIFO */
++#define MSGCTL_OUT_FIFO_WRITE		0x01000000 /* enable FIFO + WRITE */
++#define MSGCTL_IN_FIFO_WRITE		0x02000000
++
++/* NPE mailbox_status value for reset */
++#define RESET_MBOX_STAT			0x0000F0F0
++
++const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
++
++#define print_npe(pri, npe, fmt, ...)					\
++	printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
++
++#if DEBUG_MSG
++#define debug_msg(npe, fmt, ...)					\
++	print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__)
++#else
++#define debug_msg(npe, fmt, ...)
++#endif
++
++static struct {
++	u32 reg, val;
++} ecs_reset[] = {
++	{ ECS_BG_CTXT_REG_0,	0xA0000000 },
++	{ ECS_BG_CTXT_REG_1,	0x01000000 },
++	{ ECS_BG_CTXT_REG_2,	0x00008000 },
++	{ ECS_PRI_1_CTXT_REG_0,	0x20000080 },
++	{ ECS_PRI_1_CTXT_REG_1,	0x01000000 },
++	{ ECS_PRI_1_CTXT_REG_2,	0x00008000 },
++	{ ECS_PRI_2_CTXT_REG_0,	0x20000080 },
++	{ ECS_PRI_2_CTXT_REG_1,	0x01000000 },
++	{ ECS_PRI_2_CTXT_REG_2,	0x00008000 },
++	{ ECS_DBG_CTXT_REG_0,	0x20000000 },
++	{ ECS_DBG_CTXT_REG_1,	0x00000000 },
++	{ ECS_DBG_CTXT_REG_2,	0x001E0000 },
++	{ ECS_INSTRUCT_REG,	0x1003C00F },
++};
++
++static struct npe npe_tab[NPE_COUNT] = {
++	{
++		.id	= 0,
++		.regs	= (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT,
++		.regs_phys = IXP4XX_NPEA_BASE_PHYS,
++	}, {
++		.id	= 1,
++		.regs	= (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT,
++		.regs_phys = IXP4XX_NPEB_BASE_PHYS,
++	}, {
++		.id	= 2,
++		.regs	= (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT,
++		.regs_phys = IXP4XX_NPEC_BASE_PHYS,
++	}
++};
++
++int npe_running(struct npe *npe)
++{
++	return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0;
++}
++
++static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data)
++{
++	__raw_writel(data, &npe->regs->exec_data);
++	__raw_writel(addr, &npe->regs->exec_addr);
++	__raw_writel(cmd, &npe->regs->exec_status_cmd);
++}
++
++static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd)
++{
++	__raw_writel(addr, &npe->regs->exec_addr);
++	__raw_writel(cmd, &npe->regs->exec_status_cmd);
++	/* Iintroduce extra read cycles after issuing read command to NPE
++	   so that we read the register after the NPE has updated it.
++	   This is to overcome race condition between XScale and NPE */
++	__raw_readl(&npe->regs->exec_data);
++	__raw_readl(&npe->regs->exec_data);
++	return __raw_readl(&npe->regs->exec_data);
++}
++
++static void npe_clear_active(struct npe *npe, u32 reg)
++{
++	u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG);
++	npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE);
++}
++
++static void npe_start(struct npe *npe)
++{
++	/* ensure only Background Context Stack Level is active */
++	npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0);
++	npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0);
++	npe_clear_active(npe, ECS_DBG_CTXT_REG_0);
++
++	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
++	__raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd);
++}
++
++static void npe_stop(struct npe *npe)
++{
++	__raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd);
++	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/
++}
++
++static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx,
++					u32 ldur)
++{
++	u32 wc;
++	int i;
++
++	/* set the Active bit, and the LDUR, in the debug level */
++	npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG,
++		      ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS));
++
++	/* set CCTXT at ECS DEBUG L3 to specify in which context to execute
++	   the instruction, and set SELCTXT at ECS DEBUG Level to specify
++	   which context store to access.
++	   Debug ECS Level Reg 1 has form 0x000n000n, where n = context number
++	*/
++	npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG,
++		      (ctx << ECS_REG_1_CCTXT_BITS) |
++		      (ctx << ECS_REG_1_SELCTXT_BITS));
++
++	/* clear the pipeline */
++	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
++
++	/* load NPE instruction into the instruction register */
++	npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr);
++
++	/* we need this value later to wait for completion of NPE execution
++	   step */
++	wc = __raw_readl(&npe->regs->watch_count);
++
++	/* issue a Step One command via the Execution Control register */
++	__raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd);
++
++	/* Watch Count register increments when NPE completes an instruction */
++	for (i = 0; i < MAX_RETRIES; i++) {
++		if (wc != __raw_readl(&npe->regs->watch_count))
++			return 0;
++		udelay(1);
++	}
++
++	print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n");
++	return -ETIMEDOUT;
++}
++
++static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr,
++					       u8 val, u32 ctx)
++{
++	/* here we build the NPE assembler instruction: mov8 d0, #0 */
++	u32 instr = INSTR_WR_REG_BYTE |	/* OpCode */
++		addr << 9 |		/* base Operand */
++		(val & 0x1F) << 4 |	/* lower 5 bits to immediate data */
++		(val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */
++	return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
++}
++
++static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr,
++						u16 val, u32 ctx)
++{
++	/* here we build the NPE assembler instruction: mov16 d0, #0 */
++	u32 instr = INSTR_WR_REG_SHORT | /* OpCode */
++		addr << 9 |		/* base Operand */
++		(val & 0x1F) << 4 |	/* lower 5 bits to immediate data */
++		(val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */
++	return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
++}
++
++static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
++						u32 val, u32 ctx)
++{
++	/* write in 16 bit steps first the high and then the low value */
++	if (npe_logical_reg_write16(npe, addr, val >> 16, ctx))
++		return -ETIMEDOUT;
++	return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx);
++}
++
++static int npe_reset(struct npe *npe)
++{
++	u32 val, ctl, exec_count, ctx_reg2;
++	int i;
++
++	ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) &
++		0x3F3FFFFF;
++
++	/* disable parity interrupt */
++	__raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control);
++
++	/* pre exec - debug instruction */
++	/* turn off the halt bit by clearing Execution Count register. */
++	exec_count = __raw_readl(&npe->regs->exec_count);
++	__raw_writel(0, &npe->regs->exec_count);
++	/* ensure that IF and IE are on (temporarily), so that we don't end up
++	   stepping forever */
++	ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG);
++	npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 |
++		      ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE);
++
++	/* clear the FIFOs */
++	while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID)
++		;
++	while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE)
++		/* read from the outFIFO until empty */
++		print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n",
++			  __raw_readl(&npe->regs->in_out_fifo));
++
++	while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)
++		/* step execution of the NPE intruction to read inFIFO using
++		   the Debug Executing Context stack */
++		if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0))
++			return -ETIMEDOUT;
++
++	/* reset the mailbox reg from the XScale side */
++	__raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status);
++	/* from NPE side */
++	if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0))
++		return -ETIMEDOUT;
++
++	/* Reset the physical registers in the NPE register file */
++	for (val = 0; val < NPE_PHYS_REG; val++) {
++		if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0))
++			return -ETIMEDOUT;
++		/* address is either 0 or 4 */
++		if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0))
++			return -ETIMEDOUT;
++	}
++
++	/* Reset the context store = each context's Context Store registers */
++
++	/* Context 0 has no STARTPC. Instead, this value is used to set NextPC
++	   for Background ECS, to set where NPE starts executing code */
++	val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG);
++	val &= ~ECS_REG_0_NEXTPC_MASK;
++	val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK;
++	npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val);
++
++	for (i = 0; i < 16; i++) {
++		if (i) {	/* Context 0 has no STEVT nor STARTPC */
++			/* STEVT = off, 0x80 */
++			if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i))
++				return -ETIMEDOUT;
++			if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i))
++				return -ETIMEDOUT;
++		}
++		/* REGMAP = d0->p0, d8->p2, d16->p4 */
++		if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i))
++			return -ETIMEDOUT;
++		if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i))
++			return -ETIMEDOUT;
++	}
++
++	/* post exec */
++	/* clear active bit in debug level */
++	npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0);
++	/* clear the pipeline */
++	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
++	/* restore previous values */
++	__raw_writel(exec_count, &npe->regs->exec_count);
++	npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2);
++
++	/* write reset values to Execution Context Stack registers */
++	for (val = 0; val < ARRAY_SIZE(ecs_reset); val++)
++		npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG,
++			      ecs_reset[val].val);
++
++	/* clear the profile counter */
++	__raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd);
++
++	__raw_writel(0, &npe->regs->exec_count);
++	__raw_writel(0, &npe->regs->action_points[0]);
++	__raw_writel(0, &npe->regs->action_points[1]);
++	__raw_writel(0, &npe->regs->action_points[2]);
++	__raw_writel(0, &npe->regs->action_points[3]);
++	__raw_writel(0, &npe->regs->watch_count);
++
++	val = ixp4xx_read_feature_bits();
++	/* reset the NPE */
++	ixp4xx_write_feature_bits(val &
++				  ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
++	for (i = 0; i < MAX_RETRIES; i++) {
++		if (!(ixp4xx_read_feature_bits() &
++		      (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
++			break;	/* reset completed */
++		udelay(1);
++	}
++	if (i == MAX_RETRIES)
++		return -ETIMEDOUT;
++
++	/* deassert reset */
++	ixp4xx_write_feature_bits(val |
++				  (IXP4XX_FEATURE_RESET_NPEA << npe->id));
++	for (i = 0; i < MAX_RETRIES; i++) {
++		if (ixp4xx_read_feature_bits() &
++		    (IXP4XX_FEATURE_RESET_NPEA << npe->id))
++			break;	/* NPE is back alive */
++		udelay(1);
++	}
++	if (i == MAX_RETRIES)
++		return -ETIMEDOUT;
++
++	npe_stop(npe);
++
++	/* restore NPE configuration bus Control Register - parity settings */
++	__raw_writel(ctl, &npe->regs->messaging_control);
++	return 0;
++}
++
++
++int npe_send_message(struct npe *npe, const void *msg, const char *what)
++{
++	const u32 *send = msg;
++	int cycles = 0;
++
++	debug_msg(npe, "Trying to send message %s [%08X:%08X]\n",
++		  what, send[0], send[1]);
++
++	if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) {
++		debug_msg(npe, "NPE input FIFO not empty\n");
++		return -EIO;
++	}
++
++	__raw_writel(send[0], &npe->regs->in_out_fifo);
++
++	if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) {
++		debug_msg(npe, "NPE input FIFO full\n");
++		return -EIO;
++	}
++
++	__raw_writel(send[1], &npe->regs->in_out_fifo);
++
++	while ((cycles < MAX_RETRIES) &&
++	       (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) {
++		udelay(1);
++		cycles++;
++	}
++
++	if (cycles == MAX_RETRIES) {
++		debug_msg(npe, "Timeout sending message\n");
++		return -ETIMEDOUT;
++	}
++
++	debug_msg(npe, "Sending a message took %i cycles\n", cycles);
++	return 0;
++}
++
++int npe_recv_message(struct npe *npe, void *msg, const char *what)
++{
++	u32 *recv = msg;
++	int cycles = 0, cnt = 0;
++
++	debug_msg(npe, "Trying to receive message %s\n", what);
++
++	while (cycles < MAX_RETRIES) {
++		if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) {
++			recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo);
++			if (cnt == 2)
++				break;
++		} else {
++			udelay(1);
++			cycles++;
++		}
++	}
++
++	switch(cnt) {
++	case 1:
++		debug_msg(npe, "Received [%08X]\n", recv[0]);
++		break;
++	case 2:
++		debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]);
++		break;
++	}
++
++	if (cycles == MAX_RETRIES) {
++		debug_msg(npe, "Timeout waiting for message\n");
++		return -ETIMEDOUT;
++	}
++
++	debug_msg(npe, "Receiving a message took %i cycles\n", cycles);
++	return 0;
++}
++
++int npe_send_recv_message(struct npe *npe, void *msg, const char *what)
++{
++	int result;
++	u32 *send = msg, recv[2];
++
++	if ((result = npe_send_message(npe, msg, what)) != 0)
++		return result;
++	if ((result = npe_recv_message(npe, recv, what)) != 0)
++		return result;
++
++	if ((recv[0] != send[0]) || (recv[1] != send[1])) {
++		debug_msg(npe, "Message %s: unexpected message received\n",
++			  what);
++		return -EIO;
++	}
++	return 0;
++}
++
++
++int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
++{
++	const struct firmware *fw_entry;
++
++	struct dl_block {
++		u32 type;
++		u32 offset;
++	} *blk;
++
++	struct dl_image {
++		u32 magic;
++		u32 id;
++		u32 size;
++		union {
++			u32 data[0];
++			struct dl_block blocks[0];
++		};
++	} *image;
++
++	struct dl_codeblock {
++		u32 npe_addr;
++		u32 size;
++		u32 data[0];
++	} *cb;
++
++	int i, j, err, data_size, instr_size, blocks, table_end;
++	u32 cmd;
++
++	if ((err = request_firmware(&fw_entry, name, dev)) != 0)
++		return err;
++
++	err = -EINVAL;
++	if (fw_entry->size < sizeof(struct dl_image)) {
++		print_npe(KERN_ERR, npe, "incomplete firmware file\n");
++		goto err;
++	}
++	image = (struct dl_image*)fw_entry->data;
++
++#if DEBUG_FW
++	print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n",
++		  image->magic, image->id, image->size, image->size * 4);
++#endif
++
++	if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
++		image->id = swab32(image->id);
++		image->size = swab32(image->size);
++	} else if (image->magic != FW_MAGIC) {
++		print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
++			  image->magic);
++		goto err;
++	}
++	if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
++		print_npe(KERN_ERR, npe,
++			  "inconsistent size of firmware file\n");
++		goto err;
++	}
++	if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
++		print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
++		goto err;
++	}
++	if (image->magic == swab32(FW_MAGIC))
++		for (i = 0; i < image->size; i++)
++			image->data[i] = swab32(image->data[i]);
++
++	if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
++		print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
++			  "IXP42x\n");
++		goto err;
++	}
++
++	if (npe_running(npe)) {
++		print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
++			  "already running\n");
++		err = -EBUSY;
++		goto err;
++	}
++#if 0
++	npe_stop(npe);
++	npe_reset(npe);
++#endif
++
++	print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
++		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
++		  (image->id >> 8) & 0xFF, image->id & 0xFF);
++
++	if (!cpu_is_ixp46x()) {
++		if (!npe->id)
++			instr_size = NPE_A_42X_INSTR_SIZE;
++		else
++			instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
++		data_size = NPE_42X_DATA_SIZE;
++	} else {
++		instr_size = NPE_46X_INSTR_SIZE;
++		data_size = NPE_46X_DATA_SIZE;
++	}
++
++	for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
++	     blocks++)
++		if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
++			break;
++	if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
++		print_npe(KERN_INFO, npe, "firmware EOF block marker not "
++			  "found\n");
++		goto err;
++	}
++
++#if DEBUG_FW
++	print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
++#endif
++
++	table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */;
++	for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
++		if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
++		    || blk->offset < table_end) {
++			print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
++				  "firmware block #%i\n", blk->offset, i);
++			goto err;
++		}
++
++		cb = (struct dl_codeblock*)&image->data[blk->offset];
++		if (blk->type == FW_BLOCK_TYPE_INSTR) {
++			if (cb->npe_addr + cb->size > instr_size)
++				goto too_big;
++			cmd = CMD_WR_INS_MEM;
++		} else if (blk->type == FW_BLOCK_TYPE_DATA) {
++			if (cb->npe_addr + cb->size > data_size)
++				goto too_big;
++			cmd = CMD_WR_DATA_MEM;
++		} else {
++			print_npe(KERN_INFO, npe, "invalid firmware block #%i "
++				  "type 0x%X\n", i, blk->type);
++			goto err;
++		}
++		if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
++			print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
++				  "fit in firmware image: type %c, start 0x%X,"
++				  " length 0x%X\n", i,
++				  blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
++				  cb->npe_addr, cb->size);
++			goto err;
++		}
++
++		for (j = 0; j < cb->size; j++)
++			npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
++	}
++
++	npe_start(npe);
++	if (!npe_running(npe))
++		print_npe(KERN_ERR, npe, "unable to start\n");
++	release_firmware(fw_entry);
++	return 0;
++
++too_big:
++	print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
++		  "memory: type %c, start 0x%X, length 0x%X\n", i,
++		  blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
++		  cb->npe_addr, cb->size);
++err:
++	release_firmware(fw_entry);
++	return err;
++}
++
++
++struct npe *npe_request(int id)
++{
++	if (id < NPE_COUNT)
++		if (npe_tab[id].valid)
++			if (try_module_get(THIS_MODULE))
++				return &npe_tab[id];
++	return NULL;
++}
++
++void npe_release(struct npe *npe)
++{
++	module_put(THIS_MODULE);
++}
++
++
++static int __init npe_init_module(void)
++{
++
++	int i, found = 0;
++
++	for (i = 0; i < NPE_COUNT; i++) {
++		struct npe *npe = &npe_tab[i];
++		if (!(ixp4xx_read_feature_bits() &
++		      (IXP4XX_FEATURE_RESET_NPEA << i)))
++			continue; /* NPE already disabled or not present */
++		if (!(npe->mem_res = request_mem_region(npe->regs_phys,
++							REGS_SIZE,
++							npe_name(npe)))) {
++			print_npe(KERN_ERR, npe,
++				  "failed to request memory region\n");
++			continue;
++		}
++
++		if (npe_reset(npe))
++			continue;
++		npe->valid = 1;
++		found++;
++	}
++
++	if (!found)
++		return -ENOSYS;
++	return 0;
++}
++
++static void __exit npe_cleanup_module(void)
++{
++	int i;
++
++	for (i = 0; i < NPE_COUNT; i++)
++		if (npe_tab[i].mem_res) {
++			npe_reset(&npe_tab[i]);
++			release_resource(npe_tab[i].mem_res);
++		}
++}
++
++module_init(npe_init_module);
++module_exit(npe_cleanup_module);
++
++MODULE_AUTHOR("Krzysztof Halasa");
++MODULE_LICENSE("GPL v2");
++
++EXPORT_SYMBOL(npe_names);
++EXPORT_SYMBOL(npe_running);
++EXPORT_SYMBOL(npe_request);
++EXPORT_SYMBOL(npe_release);
++EXPORT_SYMBOL(npe_load_firmware);
++EXPORT_SYMBOL(npe_send_message);
++EXPORT_SYMBOL(npe_recv_message);
++EXPORT_SYMBOL(npe_send_recv_message);
+diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+new file mode 100644
+index 0000000..e833013
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+@@ -0,0 +1,274 @@
++/*
++ * Intel IXP4xx Queue Manager driver for Linux
++ *
++ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/ioport.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <asm/arch/qmgr.h>
++
++#define DEBUG		0
++
++struct qmgr_regs __iomem *qmgr_regs;
++static struct resource *mem_res;
++static spinlock_t qmgr_lock;
++static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
++static void (*irq_handlers[HALF_QUEUES])(void *pdev);
++static void *irq_pdevs[HALF_QUEUES];
++
++void qmgr_set_irq(unsigned int queue, int src,
++		  void (*handler)(void *pdev), void *pdev)
++{
++	u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
++	int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
++	unsigned long flags;
++
++	src &= 7;
++	spin_lock_irqsave(&qmgr_lock, flags);
++	__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
++	irq_handlers[queue] = handler;
++	irq_pdevs[queue] = pdev;
++	spin_unlock_irqrestore(&qmgr_lock, flags);
++}
++
++
++static irqreturn_t qmgr_irq1(int irq, void *pdev)
++{
++	int i;
++	u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
++	__raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
++
++	for (i = 0; i < HALF_QUEUES; i++)
++		if (val & (1 << i))
++			irq_handlers[i](irq_pdevs[i]);
++
++	return val ? IRQ_HANDLED : 0;
++}
++
++
++void qmgr_enable_irq(unsigned int queue)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&qmgr_lock, flags);
++	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
++		     &qmgr_regs->irqen[0]);
++	spin_unlock_irqrestore(&qmgr_lock, flags);
++}
++
++void qmgr_disable_irq(unsigned int queue)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&qmgr_lock, flags);
++	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
++		     &qmgr_regs->irqen[0]);
++	spin_unlock_irqrestore(&qmgr_lock, flags);
++}
++
++static inline void shift_mask(u32 *mask)
++{
++	mask[3] = mask[3] << 1 | mask[2] >> 31;
++	mask[2] = mask[2] << 1 | mask[1] >> 31;
++	mask[1] = mask[1] << 1 | mask[0] >> 31;
++	mask[0] <<= 1;
++}
++
++int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
++		       unsigned int nearly_empty_watermark,
++		       unsigned int nearly_full_watermark)
++{
++	u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
++	int err;
++
++	if (queue >= HALF_QUEUES)
++		return -ERANGE;
++
++	if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
++		return -EINVAL;
++
++	switch (len) {
++	case  16:
++		cfg = 0 << 24;
++		mask[0] = 0x1;
++		break;
++	case  32:
++		cfg = 1 << 24;
++		mask[0] = 0x3;
++		break;
++	case  64:
++		cfg = 2 << 24;
++		mask[0] = 0xF;
++		break;
++	case 128:
++		cfg = 3 << 24;
++		mask[0] = 0xFF;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	cfg |= nearly_empty_watermark << 26;
++	cfg |= nearly_full_watermark << 29;
++	len /= 16;		/* in 16-dwords: 1, 2, 4 or 8 */
++	mask[1] = mask[2] = mask[3] = 0;
++
++	if (!try_module_get(THIS_MODULE))
++		return -ENODEV;
++
++	spin_lock_irq(&qmgr_lock);
++	if (__raw_readl(&qmgr_regs->sram[queue])) {
++		err = -EBUSY;
++		goto err;
++	}
++
++	while (1) {
++		if (!(used_sram_bitmap[0] & mask[0]) &&
++		    !(used_sram_bitmap[1] & mask[1]) &&
++		    !(used_sram_bitmap[2] & mask[2]) &&
++		    !(used_sram_bitmap[3] & mask[3]))
++			break; /* found free space */
++
++		addr++;
++		shift_mask(mask);
++		if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
++			printk(KERN_ERR "qmgr: no free SRAM space for"
++			       " queue %i\n", queue);
++			err = -ENOMEM;
++			goto err;
++		}
++	}
++
++	used_sram_bitmap[0] |= mask[0];
++	used_sram_bitmap[1] |= mask[1];
++	used_sram_bitmap[2] |= mask[2];
++	used_sram_bitmap[3] |= mask[3];
++	__raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
++	spin_unlock_irq(&qmgr_lock);
++
++#if DEBUG
++	printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
++	       queue, addr);
++#endif
++	return 0;
++
++err:
++	spin_unlock_irq(&qmgr_lock);
++	module_put(THIS_MODULE);
++	return err;
++}
++
++void qmgr_release_queue(unsigned int queue)
++{
++	u32 cfg, addr, mask[4];
++
++	BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
++
++	spin_lock_irq(&qmgr_lock);
++	cfg = __raw_readl(&qmgr_regs->sram[queue]);
++	addr = (cfg >> 14) & 0xFF;
++
++	BUG_ON(!addr);		/* not requested */
++
++	switch ((cfg >> 24) & 3) {
++	case 0: mask[0] = 0x1; break;
++	case 1: mask[0] = 0x3; break;
++	case 2: mask[0] = 0xF; break;
++	case 3: mask[0] = 0xFF; break;
++	}
++
++	while (addr--)
++		shift_mask(mask);
++
++	__raw_writel(0, &qmgr_regs->sram[queue]);
++
++	used_sram_bitmap[0] &= ~mask[0];
++	used_sram_bitmap[1] &= ~mask[1];
++	used_sram_bitmap[2] &= ~mask[2];
++	used_sram_bitmap[3] &= ~mask[3];
++	irq_handlers[queue] = NULL; /* catch IRQ bugs */
++	spin_unlock_irq(&qmgr_lock);
++
++	module_put(THIS_MODULE);
++#if DEBUG
++	printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
++#endif
++}
++
++static int qmgr_init(void)
++{
++	int i, err;
++	mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
++				     IXP4XX_QMGR_REGION_SIZE,
++				     "IXP4xx Queue Manager");
++	if (mem_res == NULL)
++		return -EBUSY;
++
++	qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
++	if (qmgr_regs == NULL) {
++		err = -ENOMEM;
++		goto error_map;
++	}
++
++	/* reset qmgr registers */
++	for (i = 0; i < 4; i++) {
++		__raw_writel(0x33333333, &qmgr_regs->stat1[i]);
++		__raw_writel(0, &qmgr_regs->irqsrc[i]);
++	}
++	for (i = 0; i < 2; i++) {
++		__raw_writel(0, &qmgr_regs->stat2[i]);
++		__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
++		__raw_writel(0, &qmgr_regs->irqen[i]);
++	}
++
++	for (i = 0; i < QUEUES; i++)
++		__raw_writel(0, &qmgr_regs->sram[i]);
++
++	err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
++			  "IXP4xx Queue Manager", NULL);
++	if (err) {
++		printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
++		       IRQ_IXP4XX_QM1);
++		goto error_irq;
++	}
++
++	used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
++	spin_lock_init(&qmgr_lock);
++
++	printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
++	return 0;
++
++error_irq:
++	iounmap(qmgr_regs);
++error_map:
++	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
++	return err;
++}
++
++static void qmgr_remove(void)
++{
++	free_irq(IRQ_IXP4XX_QM1, NULL);
++	synchronize_irq(IRQ_IXP4XX_QM1);
++	iounmap(qmgr_regs);
++	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
++}
++
++module_init(qmgr_init);
++module_exit(qmgr_remove);
++
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Krzysztof Halasa");
++
++EXPORT_SYMBOL(qmgr_regs);
++EXPORT_SYMBOL(qmgr_set_irq);
++EXPORT_SYMBOL(qmgr_enable_irq);
++EXPORT_SYMBOL(qmgr_disable_irq);
++EXPORT_SYMBOL(qmgr_request_queue);
++EXPORT_SYMBOL(qmgr_release_queue);
+diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
+index f9cc2b6..9274d3f 100644
+--- a/drivers/net/arm/Kconfig
++++ b/drivers/net/arm/Kconfig
+@@ -47,3 +47,13 @@ config EP93XX_ETH
+ 	help
+ 	  This is a driver for the ethernet hardware included in EP93xx CPUs.
+ 	  Say Y if you are building a kernel for EP93xx based devices.
++
++config IXP4XX_ETH
++	tristate "IXP4xx Ethernet support"
++	depends on NET_ETHERNET && ARM && ARCH_IXP4XX
++	select IXP4XX_NPE
++	select IXP4XX_QMGR
++	select MII
++	help
++	  Say Y here if you want to use built-in Ethernet ports
++	  on IXP4xx processor.
+diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
+index a4c8682..7c812ac 100644
+--- a/drivers/net/arm/Makefile
++++ b/drivers/net/arm/Makefile
+@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
+ obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
+ obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
+ obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o
++obj-$(CONFIG_IXP4XX_ETH)	+= ixp4xx_eth.o
+diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
+new file mode 100644
+index 0000000..2c23f50
+--- /dev/null
++++ b/drivers/net/arm/ixp4xx_eth.c
+@@ -0,0 +1,1259 @@
++/*
++ * Intel IXP4xx Ethernet driver for Linux
++ *
++ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ *
++ * Ethernet port config (0x00 is not present on IXP42X):
++ *
++ * logical port		0x00		0x10		0x20
++ * NPE			0 (NPE-A)	1 (NPE-B)	2 (NPE-C)
++ * physical PortId	2		0		1
++ * TX queue		23		24		25
++ * RX-free queue	26		27		28
++ * TX-done queue is always 31, per-port RX and TX-ready queues are configurable
++ *
++ *
++ * Queue entries:
++ * bits 0 -> 1	- NPE ID (RX and TX-done)
++ * bits 0 -> 2	- priority (TX, per 802.1D)
++ * bits 3 -> 4	- port ID (user-set?)
++ * bits 5 -> 31	- physical descriptor address
++ */
++
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/etherdevice.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/mii.h>
++#include <linux/platform_device.h>
++#include <asm/arch/npe.h>
++#include <asm/arch/qmgr.h>
++
++#define DEBUG_QUEUES		0
++#define DEBUG_DESC		0
++#define DEBUG_RX		0
++#define DEBUG_TX		0
++#define DEBUG_PKT_BYTES		0
++#define DEBUG_MDIO		0
++#define DEBUG_CLOSE		0
++
++#define DRV_NAME		"ixp4xx_eth"
++
++#define MAX_NPES		3
++
++#define RX_DESCS		64 /* also length of all RX queues */
++#define TX_DESCS		16 /* also length of all TX queues */
++#define TXDONE_QUEUE_LEN	64 /* dwords */
++
++#define POOL_ALLOC_SIZE		(sizeof(struct desc) * (RX_DESCS + TX_DESCS))
++#define REGS_SIZE		0x1000
++#define MAX_MRU			1536 /* 0x600 */
++
++#define MDIO_INTERVAL		(3 * HZ)
++#define MAX_MDIO_RETRIES	100 /* microseconds, typically 30 cycles */
++#define MAX_MII_RESET_RETRIES	100 /* mdio_read() cycles, typically 4 */
++#define MAX_CLOSE_WAIT		1000 /* microseconds, typically 2-3 cycles */
++
++#define NPE_ID(port_id)		((port_id) >> 4)
++#define PHYSICAL_ID(port_id)	((NPE_ID(port_id) + 2) % 3)
++#define TX_QUEUE(port_id)	(NPE_ID(port_id) + 23)
++#define RXFREE_QUEUE(port_id)	(NPE_ID(port_id) + 26)
++#define TXDONE_QUEUE		31
++
++/* TX Control Registers */
++#define TX_CNTRL0_TX_EN		0x01
++#define TX_CNTRL0_HALFDUPLEX	0x02
++#define TX_CNTRL0_RETRY		0x04
++#define TX_CNTRL0_PAD_EN	0x08
++#define TX_CNTRL0_APPEND_FCS	0x10
++#define TX_CNTRL0_2DEFER	0x20
++#define TX_CNTRL0_RMII		0x40 /* reduced MII */
++#define TX_CNTRL1_RETRIES	0x0F /* 4 bits */
++
++/* RX Control Registers */
++#define RX_CNTRL0_RX_EN		0x01
++#define RX_CNTRL0_PADSTRIP_EN	0x02
++#define RX_CNTRL0_SEND_FCS	0x04
++#define RX_CNTRL0_PAUSE_EN	0x08
++#define RX_CNTRL0_LOOP_EN	0x10
++#define RX_CNTRL0_ADDR_FLTR_EN	0x20
++#define RX_CNTRL0_RX_RUNT_EN	0x40
++#define RX_CNTRL0_BCAST_DIS	0x80
++#define RX_CNTRL1_DEFER_EN	0x01
++
++/* Core Control Register */
++#define CORE_RESET		0x01
++#define CORE_RX_FIFO_FLUSH	0x02
++#define CORE_TX_FIFO_FLUSH	0x04
++#define CORE_SEND_JAM		0x08
++#define CORE_MDC_EN		0x10 /* MDIO using NPE-B ETH-0 only */
++
++#define DEFAULT_TX_CNTRL0	(TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY |	\
++				 TX_CNTRL0_PAD_EN | TX_CNTRL0_APPEND_FCS | \
++				 TX_CNTRL0_2DEFER)
++#define DEFAULT_RX_CNTRL0	RX_CNTRL0_RX_EN
++#define DEFAULT_CORE_CNTRL	CORE_MDC_EN
++
++
++/* NPE message codes */
++#define NPE_GETSTATUS			0x00
++#define NPE_EDB_SETPORTADDRESS		0x01
++#define NPE_EDB_GETMACADDRESSDATABASE	0x02
++#define NPE_EDB_SETMACADDRESSSDATABASE	0x03
++#define NPE_GETSTATS			0x04
++#define NPE_RESETSTATS			0x05
++#define NPE_SETMAXFRAMELENGTHS		0x06
++#define NPE_VLAN_SETRXTAGMODE		0x07
++#define NPE_VLAN_SETDEFAULTRXVID	0x08
++#define NPE_VLAN_SETPORTVLANTABLEENTRY	0x09
++#define NPE_VLAN_SETPORTVLANTABLERANGE	0x0A
++#define NPE_VLAN_SETRXQOSENTRY		0x0B
++#define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C
++#define NPE_STP_SETBLOCKINGSTATE	0x0D
++#define NPE_FW_SETFIREWALLMODE		0x0E
++#define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F
++#define NPE_PC_SETAPMACTABLE		0x11
++#define NPE_SETLOOPBACK_MODE		0x12
++#define NPE_PC_SETBSSIDTABLE		0x13
++#define NPE_ADDRESS_FILTER_CONFIG	0x14
++#define NPE_APPENDFCSCONFIG		0x15
++#define NPE_NOTIFY_MAC_RECOVERY_DONE	0x16
++#define NPE_MAC_RECOVERY_START		0x17
++
++
++#ifdef __ARMEB__
++typedef struct sk_buff buffer_t;
++#define free_buffer dev_kfree_skb
++#define free_buffer_irq dev_kfree_skb_irq
++#else
++typedef void buffer_t;
++#define free_buffer kfree
++#define free_buffer_irq kfree
++#endif
++
++struct eth_regs {
++	u32 tx_control[2], __res1[2];		/* 000 */
++	u32 rx_control[2], __res2[2];		/* 010 */
++	u32 random_seed, __res3[3];		/* 020 */
++	u32 partial_empty_threshold, __res4;	/* 030 */
++	u32 partial_full_threshold, __res5;	/* 038 */
++	u32 tx_start_bytes, __res6[3];		/* 040 */
++	u32 tx_deferral, rx_deferral,__res7[2];	/* 050 */
++	u32 tx_2part_deferral[2], __res8[2];	/* 060 */
++	u32 slot_time, __res9[3];		/* 070 */
++	u32 mdio_command[4];			/* 080 */
++	u32 mdio_status[4];			/* 090 */
++	u32 mcast_mask[6], __res10[2];		/* 0A0 */
++	u32 mcast_addr[6], __res11[2];		/* 0C0 */
++	u32 int_clock_threshold, __res12[3];	/* 0E0 */
++	u32 hw_addr[6], __res13[61];		/* 0F0 */
++	u32 core_control;			/* 1FC */
++};
++
++struct port {
++	struct resource *mem_res;
++	struct eth_regs __iomem *regs;
++	struct npe *npe;
++	struct net_device *netdev;
++	struct net_device_stats stat;
++	struct mii_if_info mii;
++	struct delayed_work mdio_thread;
++	struct eth_plat_info *plat;
++	buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
++	struct desc *desc_tab;	/* coherent */
++	u32 desc_tab_phys;
++	int id;			/* logical port ID */
++	u16 mii_bmcr;
++};
++
++/* NPE message structure */
++struct msg {
++#ifdef __ARMEB__
++	u8 cmd, eth_id, byte2, byte3;
++	u8 byte4, byte5, byte6, byte7;
++#else
++	u8 byte3, byte2, eth_id, cmd;
++	u8 byte7, byte6, byte5, byte4;
++#endif
++};
++
++/* Ethernet packet descriptor */
++struct desc {
++	u32 next;		/* pointer to next buffer, unused */
++
++#ifdef __ARMEB__
++	u16 buf_len;		/* buffer length */
++	u16 pkt_len;		/* packet length */
++	u32 data;		/* pointer to data buffer in RAM */
++	u8 dest_id;
++	u8 src_id;
++	u16 flags;
++	u8 qos;
++	u8 padlen;
++	u16 vlan_tci;
++#else
++	u16 pkt_len;		/* packet length */
++	u16 buf_len;		/* buffer length */
++	u32 data;		/* pointer to data buffer in RAM */
++	u16 flags;
++	u8 src_id;
++	u8 dest_id;
++	u16 vlan_tci;
++	u8 padlen;
++	u8 qos;
++#endif
++
++#ifdef __ARMEB__
++	u8 dst_mac_0, dst_mac_1, dst_mac_2, dst_mac_3;
++	u8 dst_mac_4, dst_mac_5, src_mac_0, src_mac_1;
++	u8 src_mac_2, src_mac_3, src_mac_4, src_mac_5;
++#else
++	u8 dst_mac_3, dst_mac_2, dst_mac_1, dst_mac_0;
++	u8 src_mac_1, src_mac_0, dst_mac_5, dst_mac_4;
++	u8 src_mac_5, src_mac_4, src_mac_3, src_mac_2;
++#endif
++};
++
++
++#define rx_desc_phys(port, n)	((port)->desc_tab_phys +		\
++				 (n) * sizeof(struct desc))
++#define rx_desc_ptr(port, n)	(&(port)->desc_tab[n])
++
++#define tx_desc_phys(port, n)	((port)->desc_tab_phys +		\
++				 ((n) + RX_DESCS) * sizeof(struct desc))
++#define tx_desc_ptr(port, n)	(&(port)->desc_tab[(n) + RX_DESCS])
++
++#ifndef __ARMEB__
++static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
++{
++	int i;
++	for (i = 0; i < cnt; i++)
++		dest[i] = swab32(src[i]);
++}
++#endif
++
++static spinlock_t mdio_lock;
++static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
++static int ports_open;
++static struct port *npe_port_tab[MAX_NPES];
++static struct dma_pool *dma_pool;
++
++
++static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
++		    int write, u16 cmd)
++{
++	int cycles = 0;
++
++	if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) {
++		printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name);
++		return 0;
++	}
++
++	if (write) {
++		__raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]);
++		__raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]);
++	}
++	__raw_writel(((phy_id << 5) | location) & 0xFF,
++		     &mdio_regs->mdio_command[2]);
++	__raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */,
++		     &mdio_regs->mdio_command[3]);
++
++	while ((cycles < MAX_MDIO_RETRIES) &&
++	       (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) {
++		udelay(1);
++		cycles++;
++	}
++
++	if (cycles == MAX_MDIO_RETRIES) {
++		printk(KERN_ERR "%s: MII write failed\n", dev->name);
++		return 0;
++	}
++
++#if DEBUG_MDIO
++	printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name,
++	       cycles);
++#endif
++
++	if (write)
++		return 0;
++
++	if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) {
++		printk(KERN_ERR "%s: MII read failed\n", dev->name);
++		return 0;
++	}
++
++	return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) |
++		(__raw_readl(&mdio_regs->mdio_status[1]) << 8);
++}
++
++static int mdio_read(struct net_device *dev, int phy_id, int location)
++{
++	unsigned long flags;
++	u16 val;
++
++	spin_lock_irqsave(&mdio_lock, flags);
++	val = mdio_cmd(dev, phy_id, location, 0, 0);
++	spin_unlock_irqrestore(&mdio_lock, flags);
++	return val;
++}
++
++static void mdio_write(struct net_device *dev, int phy_id, int location,
++		       int val)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&mdio_lock, flags);
++	mdio_cmd(dev, phy_id, location, 1, val);
++	spin_unlock_irqrestore(&mdio_lock, flags);
++}
++
++static void phy_reset(struct net_device *dev, int phy_id)
++{
++	struct port *port = netdev_priv(dev);
++	int cycles = 0;
++
++	mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
++	
++	while (cycles < MAX_MII_RESET_RETRIES) {
++		if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
++#if DEBUG_MDIO
++			printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
++			       dev->name, cycles);
++#endif
++			return;
++		}
++		udelay(1);
++		cycles++;
++	}
++
++	printk(KERN_ERR "%s: MII reset failed\n", dev->name);
++}
++
++static void eth_set_duplex(struct port *port)
++{
++	if (port->mii.full_duplex)
++		__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
++			     &port->regs->tx_control[0]);
++	else
++		__raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
++			     &port->regs->tx_control[0]);
++}
++
++
++static void phy_check_media(struct port *port, int init)
++{
++	if (mii_check_media(&port->mii, 1, init))
++		eth_set_duplex(port);
++	if (port->mii.force_media) { /* mii_check_media() doesn't work */
++		struct net_device *dev = port->netdev;
++		int cur_link = mii_link_ok(&port->mii);
++		int prev_link = netif_carrier_ok(dev);
++
++		if (!prev_link && cur_link) {
++			printk(KERN_INFO "%s: link up\n", dev->name);
++			netif_carrier_on(dev);
++		} else if (prev_link && !cur_link) {
++			printk(KERN_INFO "%s: link down\n", dev->name);
++			netif_carrier_off(dev);
++		}
++	}
++}
++
++
++static void mdio_thread(struct work_struct *work)
++{
++	struct port *port = container_of(work, struct port, mdio_thread.work);
++
++	phy_check_media(port, 0);
++	schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
++}
++
++
++static inline void debug_pkt(struct net_device *dev, const char *func,
++			     u8 *data, int len)
++{
++#if DEBUG_PKT_BYTES
++	int i;
++
++	printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
++	for (i = 0; i < len; i++) {
++		if (i >= DEBUG_PKT_BYTES)
++			break;
++		printk("%s%02X",
++		       ((i == 6) || (i == 12) || (i >= 14)) ? " " : "",
++		       data[i]);
++	}
++	printk("\n");
++#endif
++}
++
++
++static inline void debug_desc(u32 phys, struct desc *desc)
++{
++#if DEBUG_DESC
++	printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X"
++	       " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n",
++	       phys, desc->next, desc->buf_len, desc->pkt_len,
++	       desc->data, desc->dest_id, desc->src_id, desc->flags,
++	       desc->qos, desc->padlen, desc->vlan_tci,
++	       desc->dst_mac_0, desc->dst_mac_1, desc->dst_mac_2,
++	       desc->dst_mac_3, desc->dst_mac_4, desc->dst_mac_5,
++	       desc->src_mac_0, desc->src_mac_1, desc->src_mac_2,
++	       desc->src_mac_3, desc->src_mac_4, desc->src_mac_5);
++#endif
++}
++
++static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
++{
++#if DEBUG_QUEUES
++	static struct {
++		int queue;
++		char *name;
++	} names[] = {
++		{ TX_QUEUE(0x10), "TX#0 " },
++		{ TX_QUEUE(0x20), "TX#1 " },
++		{ TX_QUEUE(0x00), "TX#2 " },
++		{ RXFREE_QUEUE(0x10), "RX-free#0 " },
++		{ RXFREE_QUEUE(0x20), "RX-free#1 " },
++		{ RXFREE_QUEUE(0x00), "RX-free#2 " },
++		{ TXDONE_QUEUE, "TX-done " },
++	};
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(names); i++)
++		if (names[i].queue == queue)
++			break;
++
++	printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
++	       i < ARRAY_SIZE(names) ? names[i].name : "",
++	       is_get ? "->" : "<-", phys);
++#endif
++}
++
++static inline u32 queue_get_entry(unsigned int queue)
++{
++	u32 phys = qmgr_get_entry(queue);
++	debug_queue(queue, 1, phys);
++	return phys;
++}
++
++static inline int queue_get_desc(unsigned int queue, struct port *port,
++				 int is_tx)
++{
++	u32 phys, tab_phys, n_desc;
++	struct desc *tab;
++
++	if (!(phys = queue_get_entry(queue)))
++		return -1;
++
++	phys &= ~0x1F; /* mask out non-address bits */
++	tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
++	tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
++	n_desc = (phys - tab_phys) / sizeof(struct desc);
++	BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
++	debug_desc(phys, &tab[n_desc]);
++	BUG_ON(tab[n_desc].next);
++	return n_desc;
++}
++
++static inline void queue_put_desc(unsigned int queue, u32 phys,
++				  struct desc *desc)
++{
++	debug_queue(queue, 0, phys);
++	debug_desc(phys, desc);
++	BUG_ON(phys & 0x1F);
++	qmgr_put_entry(queue, phys);
++	BUG_ON(qmgr_stat_overflow(queue));
++}
++
++
++static inline void dma_unmap_tx(struct port *port, struct desc *desc)
++{
++#ifdef __ARMEB__
++	dma_unmap_single(&port->netdev->dev, desc->data,
++			 desc->buf_len, DMA_TO_DEVICE);
++#else
++	dma_unmap_single(&port->netdev->dev, desc->data & ~3,
++			 ALIGN((desc->data & 3) + desc->buf_len, 4),
++			 DMA_TO_DEVICE);
++#endif
++}
++
++
++static void eth_rx_irq(void *pdev)
++{
++	struct net_device *dev = pdev;
++	struct port *port = netdev_priv(dev);
++
++#if DEBUG_RX
++	printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name);
++#endif
++	qmgr_disable_irq(port->plat->rxq);
++	netif_rx_schedule(dev);
++}
++
++static int eth_poll(struct net_device *dev, int *budget)
++{
++	struct port *port = netdev_priv(dev);
++	unsigned int rxq = port->plat->rxq, rxfreeq = RXFREE_QUEUE(port->id);
++	int quota = dev->quota, received = 0;
++
++#if DEBUG_RX
++	printk(KERN_DEBUG "%s: eth_poll\n", dev->name);
++#endif
++
++	while (quota) {
++		struct sk_buff *skb;
++		struct desc *desc;
++		int n;
++#ifdef __ARMEB__
++		struct sk_buff *temp;
++		u32 phys;
++#endif
++
++		if ((n = queue_get_desc(rxq, port, 0)) < 0) {
++			dev->quota -= received;	/* No packet received */
++			*budget -= received;
++			received = 0;
++#if DEBUG_RX
++			printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n",
++			       dev->name);
++#endif
++			netif_rx_complete(dev);
++			qmgr_enable_irq(rxq);
++			if (!qmgr_stat_empty(rxq) &&
++			    netif_rx_reschedule(dev, 0)) {
++#if DEBUG_RX
++				printk(KERN_DEBUG "%s: eth_poll"
++				       " netif_rx_reschedule successed\n",
++				       dev->name);
++#endif
++				qmgr_disable_irq(rxq);
++				continue;
++			}
++#if DEBUG_RX
++			printk(KERN_DEBUG "%s: eth_poll all done\n",
++			       dev->name);
++#endif
++			return 0; /* all work done */
++		}
++
++		desc = rx_desc_ptr(port, n);
++
++#ifdef __ARMEB__
++		if ((skb = netdev_alloc_skb(dev, MAX_MRU)) != NULL) {
++			phys = dma_map_single(&dev->dev, skb->data,
++					      MAX_MRU, DMA_FROM_DEVICE);
++			if (dma_mapping_error(phys)) {
++				dev_kfree_skb(skb);
++				skb = NULL;
++			}
++		}
++#else
++		skb = netdev_alloc_skb(dev, desc->pkt_len);
++#endif
++
++		if (!skb) {
++			port->stat.rx_dropped++;
++			/* put the desc back on RX-ready queue */
++			desc->buf_len = MAX_MRU;
++			desc->pkt_len = 0;
++			queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
++			continue;
++		}
++
++		/* process received frame */
++#ifdef __ARMEB__
++		temp = skb;
++		skb = port->rx_buff_tab[n];
++		dma_unmap_single(&dev->dev, desc->data,
++				 MAX_MRU, DMA_FROM_DEVICE);
++#else
++		dma_sync_single(&dev->dev, desc->data,
++				MAX_MRU, DMA_FROM_DEVICE);
++		memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
++			      ALIGN(desc->pkt_len, 4) / 4);
++#endif
++		skb_put(skb, desc->pkt_len);
++
++		debug_pkt(dev, "eth_poll", skb->data, skb->len);
++
++		skb->protocol = eth_type_trans(skb, dev);
++		dev->last_rx = jiffies;
++		port->stat.rx_packets++;
++		port->stat.rx_bytes += skb->len;
++		netif_receive_skb(skb);
++
++		/* put the new buffer on RX-free queue */
++#ifdef __ARMEB__
++		port->rx_buff_tab[n] = temp;
++		desc->data = phys;
++#endif
++		desc->buf_len = MAX_MRU;
++		desc->pkt_len = 0;
++		queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
++		quota--;
++		received++;
++	}
++	dev->quota -= received;
++	*budget -= received;
++#if DEBUG_RX
++	printk(KERN_DEBUG "eth_poll(): end, not all work done\n");
++#endif
++	return 1;		/* not all work done */
++}
++
++
++static void eth_txdone_irq(void *unused)
++{
++	u32 phys;
++
++#if DEBUG_TX
++	printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n");
++#endif
++	while ((phys = queue_get_entry(TXDONE_QUEUE)) != 0) {
++		u32 npe_id, n_desc;
++		struct port *port;
++		struct desc *desc;
++		int start;
++
++		npe_id = phys & 3;
++		BUG_ON(npe_id >= MAX_NPES);
++		port = npe_port_tab[npe_id];
++		BUG_ON(!port);
++		phys &= ~0x1F; /* mask out non-address bits */
++		n_desc = (phys - tx_desc_phys(port, 0)) / sizeof(struct desc);
++		BUG_ON(n_desc >= TX_DESCS);
++		desc = tx_desc_ptr(port, n_desc);
++		debug_desc(phys, desc);
++
++		if (port->tx_buff_tab[n_desc]) { /* not the draining packet */
++			port->stat.tx_packets++;
++			port->stat.tx_bytes += desc->pkt_len;
++
++			dma_unmap_tx(port, desc);
++#if DEBUG_TX
++			printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n",
++			       port->netdev->name, port->tx_buff_tab[n_desc]);
++#endif
++			free_buffer_irq(port->tx_buff_tab[n_desc]);
++			port->tx_buff_tab[n_desc] = NULL;
++		}
++
++		start = qmgr_stat_empty(port->plat->txreadyq);
++		queue_put_desc(port->plat->txreadyq, phys, desc);
++		if (start) {
++#if DEBUG_TX
++			printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
++			       port->netdev->name);
++#endif
++			netif_wake_queue(port->netdev);
++		}
++	}
++}
++
++static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	unsigned int txreadyq = port->plat->txreadyq;
++	int len, offset, bytes, n;
++	void *mem;
++	u32 phys;
++	struct desc *desc;
++
++#if DEBUG_TX
++	printk(KERN_DEBUG "%s: eth_xmit\n", dev->name);
++#endif
++
++	if (unlikely(skb->len > MAX_MRU)) {
++		dev_kfree_skb(skb);
++		port->stat.tx_errors++;
++		return NETDEV_TX_OK;
++	}
++
++	debug_pkt(dev, "eth_xmit", skb->data, skb->len);
++
++	len = skb->len;
++#ifdef __ARMEB__
++	offset = 0; /* no need to keep alignment */
++	bytes = len;
++	mem = skb->data;
++#else
++	offset = (int)skb->data & 3; /* keep 32-bit alignment */
++	bytes = ALIGN(offset + len, 4);
++	if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
++		dev_kfree_skb(skb);
++		port->stat.tx_dropped++;
++		return NETDEV_TX_OK;
++	}
++	memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
++	dev_kfree_skb(skb);
++#endif
++
++	phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
++	if (dma_mapping_error(phys)) {
++#ifdef __ARMEB__
++		dev_kfree_skb(skb);
++#else
++		kfree(mem);
++#endif
++		port->stat.tx_dropped++;
++		return NETDEV_TX_OK;
++	}
++
++	n = queue_get_desc(txreadyq, port, 1);
++	BUG_ON(n < 0);
++	desc = tx_desc_ptr(port, n);
++
++#ifdef __ARMEB__
++	port->tx_buff_tab[n] = skb;
++#else
++	port->tx_buff_tab[n] = mem;
++#endif
++	desc->data = phys + offset;
++	desc->buf_len = desc->pkt_len = len;
++
++	/* NPE firmware pads short frames with zeros internally */
++	wmb();
++	queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
++	dev->trans_start = jiffies;
++
++	if (qmgr_stat_empty(txreadyq)) {
++#if DEBUG_TX
++		printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
++#endif
++		netif_stop_queue(dev);
++		/* we could miss TX ready interrupt */
++		if (!qmgr_stat_empty(txreadyq)) {
++#if DEBUG_TX
++			printk(KERN_DEBUG "%s: eth_xmit ready again\n",
++			       dev->name);
++#endif
++			netif_wake_queue(dev);
++		}
++	}
++
++#if DEBUG_TX
++	printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name);
++#endif
++	return NETDEV_TX_OK;
++}
++
++
++static struct net_device_stats *eth_stats(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	return &port->stat;
++}
++
++static void eth_set_mcast_list(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct dev_mc_list *mclist = dev->mc_list;
++	u8 diffs[ETH_ALEN], *addr;
++	int cnt = dev->mc_count, i;
++
++	if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) {
++		__raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN,
++			     &port->regs->rx_control[0]);
++		return;
++	}
++
++	memset(diffs, 0, ETH_ALEN);
++	addr = mclist->dmi_addr; /* first MAC address */
++
++	while (--cnt && (mclist = mclist->next))
++		for (i = 0; i < ETH_ALEN; i++)
++			diffs[i] |= addr[i] ^ mclist->dmi_addr[i];
++
++	for (i = 0; i < ETH_ALEN; i++) {
++		__raw_writel(addr[i], &port->regs->mcast_addr[i]);
++		__raw_writel(~diffs[i], &port->regs->mcast_mask[i]);
++	}
++
++	__raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN,
++		     &port->regs->rx_control[0]);
++}
++
++
++static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
++{
++	struct port *port = netdev_priv(dev);
++	unsigned int duplex_chg;
++	int err;
++
++	if (!netif_running(dev))
++		return -EINVAL;
++	err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
++	if (duplex_chg)
++		eth_set_duplex(port);
++	return err;
++}
++
++
++static int request_queues(struct port *port)
++{
++	int err;
++
++	err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0);
++	if (err)
++		return err;
++
++	err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0);
++	if (err)
++		goto rel_rxfree;
++
++	err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0);
++	if (err)
++		goto rel_rx;
++
++	err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
++	if (err)
++		goto rel_tx;
++
++	/* TX-done queue handles skbs sent out by the NPEs */
++	if (!ports_open) {
++		err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0);
++		if (err)
++			goto rel_txready;
++	}
++	return 0;
++
++rel_txready:
++	qmgr_release_queue(port->plat->txreadyq);
++rel_tx:
++	qmgr_release_queue(TX_QUEUE(port->id));
++rel_rx:
++	qmgr_release_queue(port->plat->rxq);
++rel_rxfree:
++	qmgr_release_queue(RXFREE_QUEUE(port->id));
++	printk(KERN_DEBUG "%s: unable to request hardware queues\n",
++	       port->netdev->name);
++	return err;
++}
++
++static void release_queues(struct port *port)
++{
++	qmgr_release_queue(RXFREE_QUEUE(port->id));
++	qmgr_release_queue(port->plat->rxq);
++	qmgr_release_queue(TX_QUEUE(port->id));
++	qmgr_release_queue(port->plat->txreadyq);
++
++	if (!ports_open)
++		qmgr_release_queue(TXDONE_QUEUE);
++}
++
++static int init_queues(struct port *port)
++{
++	int i;
++
++	if (!ports_open)
++		if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
++						 POOL_ALLOC_SIZE, 32, 0)))
++			return -ENOMEM;
++
++	if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
++					      &port->desc_tab_phys)))
++		return -ENOMEM;
++	memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
++	memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
++	memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
++
++	/* Setup RX buffers */
++	for (i = 0; i < RX_DESCS; i++) {
++		struct desc *desc = rx_desc_ptr(port, i);
++		buffer_t *buff;
++		void *data;
++#ifdef __ARMEB__
++		if (!(buff = netdev_alloc_skb(port->netdev, MAX_MRU)))
++			return -ENOMEM;
++		data = buff->data;
++#else
++		if (!(buff = kmalloc(MAX_MRU, GFP_KERNEL)))
++			return -ENOMEM;
++		data = buff;
++#endif
++		desc->buf_len = MAX_MRU;
++		desc->data = dma_map_single(&port->netdev->dev, data,
++					    MAX_MRU, DMA_FROM_DEVICE);
++		if (dma_mapping_error(desc->data)) {
++			free_buffer(buff);
++			return -EIO;
++		}
++		port->rx_buff_tab[i] = buff;
++	}
++
++	return 0;
++}
++
++static void destroy_queues(struct port *port)
++{
++	int i;
++
++	if (port->desc_tab) {
++		for (i = 0; i < RX_DESCS; i++) {
++			struct desc *desc = rx_desc_ptr(port, i);
++			buffer_t *buff = port->rx_buff_tab[i];
++			if (buff) {
++				dma_unmap_single(&port->netdev->dev,
++						 desc->data, MAX_MRU,
++						 DMA_FROM_DEVICE);
++				free_buffer(buff);
++			}
++		}
++		for (i = 0; i < TX_DESCS; i++) {
++			struct desc *desc = tx_desc_ptr(port, i);
++			buffer_t *buff = port->tx_buff_tab[i];
++			if (buff) {
++				dma_unmap_tx(port, desc);
++				free_buffer(buff);
++			}
++		}
++		dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
++		port->desc_tab = NULL;
++	}
++
++	if (!ports_open && dma_pool) {
++		dma_pool_destroy(dma_pool);
++		dma_pool = NULL;
++	}
++}
++
++static int eth_open(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct npe *npe = port->npe;
++	struct msg msg;
++	int i, err;
++
++	if (!npe_running(npe)) {
++		err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
++		if (err)
++			return err;
++
++		if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) {
++			printk(KERN_ERR "%s: %s not responding\n", dev->name,
++			       npe_name(npe));
++			return -EIO;
++		}
++	}
++
++	mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = NPE_VLAN_SETRXQOSENTRY;
++	msg.eth_id = port->id;
++	msg.byte5 = port->plat->rxq | 0x80;
++	msg.byte7 = port->plat->rxq << 4;
++	for (i = 0; i < 8; i++) {
++		msg.byte3 = i;
++		if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ"))
++			return -EIO;
++	}
++
++	msg.cmd = NPE_EDB_SETPORTADDRESS;
++	msg.eth_id = PHYSICAL_ID(port->id);
++	msg.byte2 = dev->dev_addr[0];
++	msg.byte3 = dev->dev_addr[1];
++	msg.byte4 = dev->dev_addr[2];
++	msg.byte5 = dev->dev_addr[3];
++	msg.byte6 = dev->dev_addr[4];
++	msg.byte7 = dev->dev_addr[5];
++	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC"))
++		return -EIO;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = NPE_FW_SETFIREWALLMODE;
++	msg.eth_id = port->id;
++	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
++		return -EIO;
++
++	if ((err = request_queues(port)) != 0)
++		return err;
++
++	if ((err = init_queues(port)) != 0) {
++		destroy_queues(port);
++		release_queues(port);
++		return err;
++	}
++
++	for (i = 0; i < ETH_ALEN; i++)
++		__raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
++	__raw_writel(0x08, &port->regs->random_seed);
++	__raw_writel(0x12, &port->regs->partial_empty_threshold);
++	__raw_writel(0x30, &port->regs->partial_full_threshold);
++	__raw_writel(0x08, &port->regs->tx_start_bytes);
++	__raw_writel(0x15, &port->regs->tx_deferral);
++	__raw_writel(0x08, &port->regs->tx_2part_deferral[0]);
++	__raw_writel(0x07, &port->regs->tx_2part_deferral[1]);
++	__raw_writel(0x80, &port->regs->slot_time);
++	__raw_writel(0x01, &port->regs->int_clock_threshold);
++
++	/* Populate queues with buffers, no failure after this point */
++	for (i = 0; i < TX_DESCS; i++)
++		queue_put_desc(port->plat->txreadyq,
++			       tx_desc_phys(port, i), tx_desc_ptr(port, i));
++
++	for (i = 0; i < RX_DESCS; i++)
++		queue_put_desc(RXFREE_QUEUE(port->id),
++			       rx_desc_phys(port, i), rx_desc_ptr(port, i));
++
++	__raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]);
++	__raw_writel(DEFAULT_TX_CNTRL0, &port->regs->tx_control[0]);
++	__raw_writel(0, &port->regs->rx_control[1]);
++	__raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]);
++
++	phy_check_media(port, 1);
++	eth_set_mcast_list(dev);
++	netif_start_queue(dev);
++	schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
++
++	qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY,
++		     eth_rx_irq, dev);
++	if (!ports_open) {
++		qmgr_set_irq(TXDONE_QUEUE, QUEUE_IRQ_SRC_NOT_EMPTY,
++			     eth_txdone_irq, NULL);
++		qmgr_enable_irq(TXDONE_QUEUE);
++	}
++	ports_open++;
++	netif_rx_schedule(dev); /* we may already have RX data, enables IRQ */
++	return 0;
++}
++
++static int eth_close(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct msg msg;
++	int buffs = RX_DESCS; /* allocated RX buffers */
++	int i;
++
++	ports_open--;
++	qmgr_disable_irq(port->plat->rxq);
++	netif_stop_queue(dev);
++
++	while (queue_get_desc(RXFREE_QUEUE(port->id), port, 0) >= 0)
++		buffs--;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = NPE_SETLOOPBACK_MODE;
++	msg.eth_id = port->id;
++	msg.byte3 = 1;
++	if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK"))
++		printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name);
++
++	i = 0;
++	do {			/* drain RX buffers */
++		while (queue_get_desc(port->plat->rxq, port, 0) >= 0)
++			buffs--;
++		if (!buffs)
++			break;
++		if (qmgr_stat_empty(TX_QUEUE(port->id))) {
++			/* we have to inject some packet */
++			struct desc *desc;
++			u32 phys;
++			int n = queue_get_desc(port->plat->txreadyq, port, 1);
++			BUG_ON(n < 0);
++			desc = tx_desc_ptr(port, n);
++			phys = tx_desc_phys(port, n);
++			desc->buf_len = desc->pkt_len = 1;
++			wmb();
++			queue_put_desc(TX_QUEUE(port->id), phys, desc);
++		}
++		udelay(1);
++	} while (++i < MAX_CLOSE_WAIT);
++
++	if (buffs)
++		printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
++		       " left in NPE\n", dev->name, buffs);
++#if DEBUG_CLOSE
++	if (!buffs)
++		printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i);
++#endif
++
++	buffs = TX_DESCS;
++	while (queue_get_desc(TX_QUEUE(port->id), port, 1) >= 0)
++		buffs--; /* cancel TX */
++
++	i = 0;
++	do {
++		while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
++			buffs--;
++		if (!buffs)
++			break;
++	} while (++i < MAX_CLOSE_WAIT);
++
++	if (buffs)
++		printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
++		       "left in NPE\n", dev->name, buffs);
++#if DEBUG_CLOSE
++	if (!buffs)
++		printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
++#endif
++
++	msg.byte3 = 0;
++	if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK"))
++		printk(KERN_CRIT "%s: unable to disable loopback\n",
++		       dev->name);
++
++	port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
++		~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
++	mdio_write(dev, port->plat->phy, MII_BMCR,
++		   port->mii_bmcr | BMCR_PDOWN);
++
++	if (!ports_open)
++		qmgr_disable_irq(TXDONE_QUEUE);
++	cancel_rearming_delayed_work(&port->mdio_thread);
++	destroy_queues(port);
++	release_queues(port);
++	return 0;
++}
++
++static int __devinit eth_init_one(struct platform_device *pdev)
++{
++	struct port *port;
++	struct net_device *dev;
++	struct eth_plat_info *plat = pdev->dev.platform_data;
++	u32 regs_phys;
++	int err;
++
++	if (!(dev = alloc_etherdev(sizeof(struct port))))
++		return -ENOMEM;
++
++	SET_MODULE_OWNER(dev);
++	SET_NETDEV_DEV(dev, &pdev->dev);
++	port = netdev_priv(dev);
++	port->netdev = dev;
++	port->id = pdev->id;
++
++	switch (port->id) {
++	case IXP4XX_ETH_NPEA:
++		port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
++		regs_phys  = IXP4XX_EthA_BASE_PHYS;
++		break;
++	case IXP4XX_ETH_NPEB:
++		port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
++		regs_phys  = IXP4XX_EthB_BASE_PHYS;
++		break;
++	case IXP4XX_ETH_NPEC:
++		port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
++		regs_phys  = IXP4XX_EthC_BASE_PHYS;
++		break;
++	default:
++		err = -ENOSYS;
++		goto err_free;
++	}
++
++	dev->open = eth_open;
++	dev->hard_start_xmit = eth_xmit;
++	dev->poll = eth_poll;
++	dev->stop = eth_close;
++	dev->get_stats = eth_stats;
++	dev->do_ioctl = eth_ioctl;
++	dev->set_multicast_list = eth_set_mcast_list;
++	dev->weight = 16;
++	dev->tx_queue_len = 100;
++
++	if (!(port->npe = npe_request(NPE_ID(port->id)))) {
++		err = -EIO;
++		goto err_free;
++	}
++
++	if (register_netdev(dev)) {
++		err = -EIO;
++		goto err_npe_rel;
++	}
++
++	port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
++	if (!port->mem_res) {
++		err = -EBUSY;
++		goto err_unreg;
++	}
++
++	port->plat = plat;
++	npe_port_tab[NPE_ID(port->id)] = port;
++	memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN);
++
++	platform_set_drvdata(pdev, dev);
++
++	__raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET,
++		     &port->regs->core_control);
++	udelay(50);
++	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
++	udelay(50);
++
++	port->mii.dev = dev;
++	port->mii.mdio_read = mdio_read;
++	port->mii.mdio_write = mdio_write;
++	port->mii.phy_id = plat->phy;
++	port->mii.phy_id_mask = 0x1F;
++	port->mii.reg_num_mask = 0x1F;
++
++	printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
++	       npe_name(port->npe));
++
++	phy_reset(dev, plat->phy);
++	port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
++		~(BMCR_RESET | BMCR_PDOWN);
++	mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
++
++	INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
++	return 0;
++
++err_unreg:
++	unregister_netdev(dev);
++err_npe_rel:
++	npe_release(port->npe);
++err_free:
++	free_netdev(dev);
++	return err;
++}
++
++static int __devexit eth_remove_one(struct platform_device *pdev)
++{
++	struct net_device *dev = platform_get_drvdata(pdev);
++	struct port *port = netdev_priv(dev);
++
++	unregister_netdev(dev);
++	npe_port_tab[NPE_ID(port->id)] = NULL;
++	platform_set_drvdata(pdev, NULL);
++	npe_release(port->npe);
++	release_resource(port->mem_res);
++	free_netdev(dev);
++	return 0;
++}
++
++static struct platform_driver drv = {
++	.driver.name	= DRV_NAME,
++	.probe		= eth_init_one,
++	.remove		= eth_remove_one,
++};
++
++static int __init eth_init_module(void)
++{
++	if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
++		return -ENOSYS;
++
++	/* All MII PHY accesses use NPE-B Ethernet registers */
++	spin_lock_init(&mdio_lock);
++	mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
++	__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
++
++	return platform_driver_register(&drv);
++}
++
++static void __exit eth_cleanup_module(void)
++{
++	platform_driver_unregister(&drv);
++}
++
++MODULE_AUTHOR("Krzysztof Halasa");
++MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver");
++MODULE_LICENSE("GPL v2");
++module_init(eth_init_module);
++module_exit(eth_cleanup_module);
+diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
+index a3df09e..94e7aa7 100644
+--- a/drivers/net/wan/Kconfig
++++ b/drivers/net/wan/Kconfig
+@@ -334,6 +334,15 @@ config DSCC4_PCI_RST
+ 
+ 	  Say Y if your card supports this feature.
+ 
++config IXP4XX_HSS
++	tristate "IXP4xx HSS (synchronous serial port) support"
++	depends on HDLC && ARM && ARCH_IXP4XX
++	select IXP4XX_NPE
++	select IXP4XX_QMGR
++	help
++	  Say Y here if you want to use built-in HSS ports
++	  on IXP4xx processor.
++
+ config DLCI
+ 	tristate "Frame Relay DLCI support"
+ 	---help---
+diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
+index d61fef3..1b1d116 100644
+--- a/drivers/net/wan/Makefile
++++ b/drivers/net/wan/Makefile
+@@ -42,6 +42,7 @@ obj-$(CONFIG_C101)		+= c101.o
+ obj-$(CONFIG_WANXL)		+= wanxl.o
+ obj-$(CONFIG_PCI200SYN)		+= pci200syn.o
+ obj-$(CONFIG_PC300TOO)		+= pc300too.o
++obj-$(CONFIG_IXP4XX_HSS)	+= ixp4xx_hss.o
+ 
+ clean-files := wanxlfw.inc
+ $(obj)/wanxl.o:	$(obj)/wanxlfw.inc
+diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
+new file mode 100644
+index 0000000..c4cdace
+--- /dev/null
++++ b/drivers/net/wan/ixp4xx_hss.c
+@@ -0,0 +1,1270 @@
++/*
++ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
++ *
++ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/hdlc.h>
++#include <linux/platform_device.h>
++#include <asm/arch/npe.h>
++#include <asm/arch/qmgr.h>
++
++#define DEBUG_QUEUES		0
++#define DEBUG_DESC		0
++#define DEBUG_RX		0
++#define DEBUG_TX		0
++#define DEBUG_PKT_BYTES		0
++#define DEBUG_CLOSE		0
++
++#define DRV_NAME		"ixp4xx_hss"
++
++#define PKT_EXTRA_FLAGS		0 /* orig 1 */
++#define FRAME_SYNC_OFFSET	0 /* unused, channelized only */
++#define FRAME_SYNC_SIZE		1024
++#define PKT_NUM_PIPES		1 /* 1, 2 or 4 */
++#define PKT_PIPE_FIFO_SIZEW	4 /* total 4 dwords per HSS */
++
++#define RX_DESCS		16 /* also length of all RX queues */
++#define TX_DESCS		16 /* also length of all TX queues */
++
++#define POOL_ALLOC_SIZE		(sizeof(struct desc) * (RX_DESCS + TX_DESCS))
++#define RX_SIZE			(HDLC_MAX_MRU + 4) /* NPE needs more space */
++#define MAX_CLOSE_WAIT		1000 /* microseconds */
++
++/* Queue IDs */
++#define HSS0_CHL_RXTRIG_QUEUE	12	/* orig size = 32 dwords */
++#define HSS0_PKT_RX_QUEUE	13	/* orig size = 32 dwords */
++#define HSS0_PKT_TX0_QUEUE	14	/* orig size = 16 dwords */
++#define HSS0_PKT_TX1_QUEUE	15
++#define HSS0_PKT_TX2_QUEUE	16
++#define HSS0_PKT_TX3_QUEUE	17
++#define HSS0_PKT_RXFREE0_QUEUE	18	/* orig size = 16 dwords */
++#define HSS0_PKT_RXFREE1_QUEUE	19
++#define HSS0_PKT_RXFREE2_QUEUE	20
++#define HSS0_PKT_RXFREE3_QUEUE	21
++#define HSS0_PKT_TXDONE_QUEUE	22	/* orig size = 64 dwords */
++
++#define HSS1_CHL_RXTRIG_QUEUE	10
++#define HSS1_PKT_RX_QUEUE	0
++#define HSS1_PKT_TX0_QUEUE	5
++#define HSS1_PKT_TX1_QUEUE	6
++#define HSS1_PKT_TX2_QUEUE	7
++#define HSS1_PKT_TX3_QUEUE	8
++#define HSS1_PKT_RXFREE0_QUEUE	1
++#define HSS1_PKT_RXFREE1_QUEUE	2
++#define HSS1_PKT_RXFREE2_QUEUE	3
++#define HSS1_PKT_RXFREE3_QUEUE	4
++#define HSS1_PKT_TXDONE_QUEUE	9
++
++#define NPE_PKT_MODE_HDLC		0
++#define NPE_PKT_MODE_RAW		1
++#define NPE_PKT_MODE_56KMODE		2
++#define NPE_PKT_MODE_56KENDIAN_MSB	4
++
++/* PKT_PIPE_HDLC_CFG_WRITE flags */
++#define PKT_HDLC_IDLE_ONES		0x1 /* default = flags */
++#define PKT_HDLC_CRC_32			0x2 /* default = CRC-16 */
++#define PKT_HDLC_MSB_ENDIAN		0x4 /* default = LE */
++
++
++/* hss_config, PCRs */
++/* Frame sync sampling, default = active low */
++#define PCR_FRM_SYNC_ACTIVE_HIGH	0x40000000
++#define PCR_FRM_SYNC_FALLINGEDGE	0x80000000
++#define PCR_FRM_SYNC_RISINGEDGE		0xC0000000
++
++/* Frame sync pin: input (default) or output generated off a given clk edge */
++#define PCR_FRM_SYNC_OUTPUT_FALLING	0x20000000
++#define PCR_FRM_SYNC_OUTPUT_RISING	0x30000000
++
++/* Frame and data clock sampling on edge, default = falling */
++#define PCR_FCLK_EDGE_RISING		0x08000000
++#define PCR_DCLK_EDGE_RISING		0x04000000
++
++/* Clock direction, default = input */
++#define PCR_SYNC_CLK_DIR_OUTPUT		0x02000000
++
++/* Generate/Receive frame pulses, default = enabled */
++#define PCR_FRM_PULSE_DISABLED		0x01000000
++
++ /* Data rate is full (default) or half the configured clk speed */
++#define PCR_HALF_CLK_RATE		0x00200000
++
++/* Invert data between NPE and HSS FIFOs? (default = no) */
++#define PCR_DATA_POLARITY_INVERT	0x00100000
++
++/* TX/RX endianness, default = LSB */
++#define PCR_MSB_ENDIAN			0x00080000
++
++/* Normal (default) / open drain mode (TX only) */
++#define PCR_TX_PINS_OPEN_DRAIN		0x00040000
++
++/* No framing bit transmitted and expected on RX? (default = framing bit) */
++#define PCR_SOF_NO_FBIT			0x00020000
++
++/* Drive data pins? */
++#define PCR_TX_DATA_ENABLE		0x00010000
++
++/* Voice 56k type: drive the data pins low (default), high, high Z */
++#define PCR_TX_V56K_HIGH		0x00002000
++#define PCR_TX_V56K_HIGH_IMP		0x00004000
++
++/* Unassigned type: drive the data pins low (default), high, high Z */
++#define PCR_TX_UNASS_HIGH		0x00000800
++#define PCR_TX_UNASS_HIGH_IMP		0x00001000
++
++/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
++#define PCR_TX_FB_HIGH_IMP		0x00000400
++
++/* 56k data endiannes - which bit unused: high (default) or low */
++#define PCR_TX_56KE_BIT_0_UNUSED	0x00000200
++
++/* 56k data transmission type: 32/8 bit data (default) or 56K data */
++#define PCR_TX_56KS_56K_DATA		0x00000100
++
++/* hss_config, cCR */
++/* Number of packetized clients, default = 1 */
++#define CCR_NPE_HFIFO_2_HDLC		0x04000000
++#define CCR_NPE_HFIFO_3_OR_4HDLC	0x08000000
++
++/* default = no loopback */
++#define CCR_LOOPBACK			0x02000000
++
++/* HSS number, default = 0 (first) */
++#define CCR_SECOND_HSS			0x01000000
++
++
++/* hss_config, clkCR: main:10, num:10, denom:12 */
++#define CLK42X_SPEED_EXP	((0x3FF << 22) | (  2 << 12) |   15) /*65 KHz*/
++
++#define CLK42X_SPEED_512KHZ	((  130 << 22) | (  2 << 12) |   15)
++#define CLK42X_SPEED_1536KHZ	((   43 << 22) | ( 18 << 12) |   47)
++#define CLK42X_SPEED_1544KHZ	((   43 << 22) | ( 33 << 12) |  192)
++#define CLK42X_SPEED_2048KHZ	((   32 << 22) | ( 34 << 12) |   63)
++#define CLK42X_SPEED_4096KHZ	((   16 << 22) | ( 34 << 12) |  127)
++#define CLK42X_SPEED_8192KHZ	((    8 << 22) | ( 34 << 12) |  255)
++
++#define CLK46X_SPEED_512KHZ	((  130 << 22) | ( 24 << 12) |  127)
++#define CLK46X_SPEED_1536KHZ	((   43 << 22) | (152 << 12) |  383)
++#define CLK46X_SPEED_1544KHZ	((   43 << 22) | ( 66 << 12) |  385)
++#define CLK46X_SPEED_2048KHZ	((   32 << 22) | (280 << 12) |  511)
++#define CLK46X_SPEED_4096KHZ	((   16 << 22) | (280 << 12) | 1023)
++#define CLK46X_SPEED_8192KHZ	((    8 << 22) | (280 << 12) | 2047)
++
++
++/* hss_config, LUT entries */
++#define TDMMAP_UNASSIGNED	0
++#define TDMMAP_HDLC		1	/* HDLC - packetized */
++#define TDMMAP_VOICE56K		2	/* Voice56K - 7-bit channelized */
++#define TDMMAP_VOICE64K		3	/* Voice64K - 8-bit channelized */
++
++#define TIMESLOTS		128
++#define LUT_BITS		2
++
++/* offsets into HSS config */
++#define HSS_CONFIG_TX_PCR	0x00
++#define HSS_CONFIG_RX_PCR	0x04
++#define HSS_CONFIG_CORE_CR	0x08
++#define HSS_CONFIG_CLOCK_CR	0x0C
++#define HSS_CONFIG_TX_FCR	0x10
++#define HSS_CONFIG_RX_FCR	0x14
++#define HSS_CONFIG_TX_LUT	0x18
++#define HSS_CONFIG_RX_LUT	0x38
++
++
++/* NPE command codes */
++/* writes the ConfigWord value to the location specified by offset */
++#define PORT_CONFIG_WRITE			0x40
++
++/* triggers the NPE to load the contents of the configuration table */
++#define PORT_CONFIG_LOAD			0x41
++
++/* triggers the NPE to return an HssErrorReadResponse message */
++#define PORT_ERROR_READ				0x42
++
++/* reset NPE internal status and enable the HssChannelized operation */
++#define CHAN_FLOW_ENABLE			0x43
++#define CHAN_FLOW_DISABLE			0x44
++#define CHAN_IDLE_PATTERN_WRITE			0x45
++#define CHAN_NUM_CHANS_WRITE			0x46
++#define CHAN_RX_BUF_ADDR_WRITE			0x47
++#define CHAN_RX_BUF_CFG_WRITE			0x48
++#define CHAN_TX_BLK_CFG_WRITE			0x49
++#define CHAN_TX_BUF_ADDR_WRITE			0x4A
++#define CHAN_TX_BUF_SIZE_WRITE			0x4B
++#define CHAN_TSLOTSWITCH_ENABLE			0x4C
++#define CHAN_TSLOTSWITCH_DISABLE		0x4D
++
++/* downloads the gainWord value for a timeslot switching channel associated
++   with bypassNum */
++#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD		0x4E
++
++/* triggers the NPE to reset internal status and enable the HssPacketized
++   operation for the flow specified by pPipe */
++#define PKT_PIPE_FLOW_ENABLE			0x50
++#define PKT_PIPE_FLOW_DISABLE			0x51
++#define PKT_NUM_PIPES_WRITE			0x52
++#define PKT_PIPE_FIFO_SIZEW_WRITE		0x53
++#define PKT_PIPE_HDLC_CFG_WRITE			0x54
++#define PKT_PIPE_IDLE_PATTERN_WRITE		0x55
++#define PKT_PIPE_RX_SIZE_WRITE			0x56
++#define PKT_PIPE_MODE_WRITE			0x57
++
++/* HDLC packet status values - desc->status */
++#define ERR_SHUTDOWN		1 /* stop or shutdown occurrance */
++#define ERR_HDLC_ALIGN		2 /* HDLC alignment error */
++#define ERR_HDLC_FCS		3 /* HDLC Frame Check Sum error */
++#define ERR_RXFREE_Q_EMPTY	4 /* RX-free queue became empty while receiving
++				     this packet (if buf_len < pkt_len) */
++#define ERR_HDLC_TOO_LONG	5 /* HDLC frame size too long */
++#define ERR_HDLC_ABORT		6 /* abort sequence received */
++#define ERR_DISCONNECTING	7 /* disconnect is in progress */
++
++
++#ifdef __ARMEB__
++typedef struct sk_buff buffer_t;
++#define free_buffer dev_kfree_skb
++#define free_buffer_irq dev_kfree_skb_irq
++#else
++typedef void buffer_t;
++#define free_buffer kfree
++#define free_buffer_irq kfree
++#endif
++
++struct port {
++	struct npe *npe;
++	struct net_device *netdev;
++	struct hss_plat_info *plat;
++	buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
++	struct desc *desc_tab;	/* coherent */
++	u32 desc_tab_phys;
++	int id;
++	unsigned int clock_type, clock_rate, loopback;
++	u8 hdlc_cfg;
++};
++
++/* NPE message structure */
++struct msg {
++#ifdef __ARMEB__
++	u8 cmd, unused, hss_port, index;
++	union {
++		struct { u8 data8a, data8b, data8c, data8d; };
++		struct { u16 data16a, data16b; };
++		struct { u32 data32; };
++	};
++#else
++	u8 index, hss_port, unused, cmd;
++	union {
++		struct { u8 data8d, data8c, data8b, data8a; };
++		struct { u16 data16b, data16a; };
++		struct { u32 data32; };
++	};
++#endif
++};
++
++/* HDLC packet descriptor */
++struct desc {
++	u32 next;		/* pointer to next buffer, unused */
++
++#ifdef __ARMEB__
++	u16 buf_len;		/* buffer length */
++	u16 pkt_len;		/* packet length */
++	u32 data;		/* pointer to data buffer in RAM */
++	u8 status;
++	u8 error_count;
++	u16 __reserved;
++#else
++	u16 pkt_len;		/* packet length */
++	u16 buf_len;		/* buffer length */
++	u32 data;		/* pointer to data buffer in RAM */
++	u16 __reserved;
++	u8 error_count;
++	u8 status;
++#endif
++	u32 __reserved1[4];
++};
++
++
++#define rx_desc_phys(port, n)	((port)->desc_tab_phys +		\
++				 (n) * sizeof(struct desc))
++#define rx_desc_ptr(port, n)	(&(port)->desc_tab[n])
++
++#define tx_desc_phys(port, n)	((port)->desc_tab_phys +		\
++				 ((n) + RX_DESCS) * sizeof(struct desc))
++#define tx_desc_ptr(port, n)	(&(port)->desc_tab[(n) + RX_DESCS])
++
++/*****************************************************************************
++ * global variables
++ ****************************************************************************/
++
++static int ports_open;
++static struct dma_pool *dma_pool;
++
++static const struct {
++	int tx, txdone, rx, rxfree;
++}queue_ids[2] = {{ HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE,
++		   HSS0_PKT_RX_QUEUE, HSS0_PKT_RXFREE0_QUEUE },
++		 { HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE,
++		   HSS1_PKT_RX_QUEUE, HSS1_PKT_RXFREE0_QUEUE },
++};
++
++/*****************************************************************************
++ * utility functions
++ ****************************************************************************/
++
++static inline struct port* dev_to_port(struct net_device *dev)
++{
++	return dev_to_hdlc(dev)->priv;
++}
++
++#ifndef __ARMEB__
++static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
++{
++	int i;
++	for (i = 0; i < cnt; i++)
++		dest[i] = swab32(src[i]);
++}
++#endif
++
++static inline void debug_pkt(struct net_device *dev, const char *func,
++			     u8 *data, int len)
++{
++#if DEBUG_PKT_BYTES
++	int i;
++
++	printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
++	for (i = 0; i < len; i++) {
++		if (i >= DEBUG_PKT_BYTES)
++			break;
++		printk("%s%02X", !(i % 4) ? " " : "", data[i]);
++	}
++	printk("\n");
++#endif
++}
++
++
++static inline void debug_desc(u32 phys, struct desc *desc)
++{
++#if DEBUG_DESC
++	printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n",
++	       phys, desc->next, desc->buf_len, desc->pkt_len,
++	       desc->data, desc->status, desc->error_count);
++#endif
++}
++
++static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
++{
++#if DEBUG_QUEUES
++	static struct {
++		int queue;
++		char *name;
++	} names[] = {
++		{ HSS0_PKT_TX0_QUEUE, "TX#0 " },
++		{ HSS0_PKT_TXDONE_QUEUE, "TX-done#0 " },
++		{ HSS0_PKT_RX_QUEUE, "RX#0 " },
++		{ HSS0_PKT_RXFREE0_QUEUE, "RX-free#0 " },
++		{ HSS1_PKT_TX0_QUEUE, "TX#1 " },
++		{ HSS1_PKT_TXDONE_QUEUE, "TX-done#1 " },
++		{ HSS1_PKT_RX_QUEUE, "RX#1 " },
++		{ HSS1_PKT_RXFREE0_QUEUE, "RX-free#1 " },
++	};
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(names); i++)
++		if (names[i].queue == queue)
++			break;
++
++	printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
++	       i < ARRAY_SIZE(names) ? names[i].name : "",
++	       is_get ? "->" : "<-", phys);
++#endif
++}
++
++static inline u32 queue_get_entry(unsigned int queue)
++{
++	u32 phys = qmgr_get_entry(queue);
++	debug_queue(queue, 1, phys);
++	return phys;
++}
++
++static inline int queue_get_desc(unsigned int queue, struct port *port,
++				 int is_tx)
++{
++	u32 phys, tab_phys, n_desc;
++	struct desc *tab;
++
++	if (!(phys = queue_get_entry(queue)))
++		return -1;
++
++	BUG_ON(phys & 0x1F);
++	tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
++	tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
++	n_desc = (phys - tab_phys) / sizeof(struct desc);
++	BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
++	debug_desc(phys, &tab[n_desc]);
++	BUG_ON(tab[n_desc].next);
++	return n_desc;
++}
++
++static inline void queue_put_desc(unsigned int queue, u32 phys,
++				  struct desc *desc)
++{
++	debug_queue(queue, 0, phys);
++	debug_desc(phys, desc);
++	BUG_ON(phys & 0x1F);
++	qmgr_put_entry(queue, phys);
++	BUG_ON(qmgr_stat_overflow(queue));
++}
++
++
++static inline void dma_unmap_tx(struct port *port, struct desc *desc)
++{
++#ifdef __ARMEB__
++	dma_unmap_single(&port->netdev->dev, desc->data,
++			 desc->buf_len, DMA_TO_DEVICE);
++#else
++	dma_unmap_single(&port->netdev->dev, desc->data & ~3,
++			 ALIGN((desc->data & 3) + desc->buf_len, 4),
++			 DMA_TO_DEVICE);
++#endif
++}
++
++
++static void hss_hdlc_set_carrier(void *pdev, int carrier)
++{
++	struct net_device *dev = pdev;
++	if (carrier)
++		netif_carrier_on(dev);
++	else
++		netif_carrier_off(dev);
++}
++
++static void hss_hdlc_rx_irq(void *pdev)
++{
++	struct net_device *dev = pdev;
++	struct port *port = dev_to_port(dev);
++
++#if DEBUG_RX
++	printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
++#endif
++	qmgr_disable_irq(queue_ids[port->id].rx);
++	netif_rx_schedule(dev);
++}
++
++static int hss_hdlc_poll(struct net_device *dev, int *budget)
++{
++	struct port *port = dev_to_port(dev);
++	unsigned int rxq = queue_ids[port->id].rx;
++	unsigned int rxfreeq = queue_ids[port->id].rxfree;
++	struct net_device_stats *stats = hdlc_stats(dev);
++	int quota = dev->quota, received = 0;
++
++#if DEBUG_RX
++	printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name);
++#endif
++
++	while (quota) {
++		struct sk_buff *skb;
++		struct desc *desc;
++		int n;
++#ifdef __ARMEB__
++		struct sk_buff *temp;
++		u32 phys;
++#endif
++
++		if ((n = queue_get_desc(rxq, port, 0)) < 0) {
++			dev->quota -= received;	/* No packet received */
++			*budget -= received;
++			received = 0;
++#if DEBUG_RX
++			printk(KERN_DEBUG "%s: hss_hdlc_poll"
++			       " netif_rx_complete\n", dev->name);
++#endif
++			netif_rx_complete(dev);
++			qmgr_enable_irq(rxq);
++			if (!qmgr_stat_empty(rxq) &&
++			    netif_rx_reschedule(dev, 0)) {
++#if DEBUG_RX
++				printk(KERN_DEBUG "%s: hss_hdlc_poll"
++				       " netif_rx_reschedule successed\n",
++				       dev->name);
++#endif
++				qmgr_disable_irq(rxq);
++				continue;
++			}
++#if DEBUG_RX
++			printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n",
++			       dev->name);
++#endif
++			return 0; /* all work done */
++		}
++
++		desc = rx_desc_ptr(port, n);
++
++		if (desc->error_count) /* FIXME - remove printk */
++			printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X"
++			       " errors %u\n", dev->name, desc->status,
++			       desc->error_count);
++
++		skb = NULL;
++		switch (desc->status) {
++		case 0:
++#ifdef __ARMEB__
++			if ((skb = netdev_alloc_skb(dev, RX_SIZE)) != NULL) {
++				phys = dma_map_single(&dev->dev, skb->data,
++						      RX_SIZE,
++						      DMA_FROM_DEVICE);
++				if (dma_mapping_error(phys)) {
++					dev_kfree_skb(skb);
++					skb = NULL;
++				}
++			}
++#else
++			skb = netdev_alloc_skb(dev, desc->pkt_len);
++#endif
++			if (!skb)
++				stats->rx_dropped++;
++			break;
++		case ERR_HDLC_ALIGN:
++		case ERR_HDLC_ABORT:
++			stats->rx_frame_errors++;
++			stats->rx_errors++;
++			break;
++		case ERR_HDLC_FCS:
++			stats->rx_crc_errors++;
++			stats->rx_errors++;
++			break;
++		case ERR_HDLC_TOO_LONG:
++			stats->rx_length_errors++;
++			stats->rx_errors++;
++			break;
++		default:	/* FIXME - remove printk */
++			printk(KERN_ERR "%s: hss_hdlc_poll: status 0x%02X"
++			       " errors %u\n", dev->name, desc->status,
++			       desc->error_count);
++			stats->rx_errors++;
++		}
++
++		if (!skb) {
++			/* put the desc back on RX-ready queue */
++			desc->buf_len = RX_SIZE;
++			desc->pkt_len = desc->status = 0;
++			queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
++			continue;
++		}
++
++		/* process received frame */
++#ifdef __ARMEB__
++		temp = skb;
++		skb = port->rx_buff_tab[n];
++		dma_unmap_single(&dev->dev, desc->data,
++				 RX_SIZE, DMA_FROM_DEVICE);
++#else
++		dma_sync_single(&dev->dev, desc->data,
++				RX_SIZE, DMA_FROM_DEVICE);
++		memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
++			      ALIGN(desc->pkt_len, 4) / 4);
++#endif
++		skb_put(skb, desc->pkt_len);
++
++		debug_pkt(dev, "hss_hdlc_poll", skb->data, skb->len);
++
++		skb->protocol = hdlc_type_trans(skb, dev);
++		dev->last_rx = jiffies;
++		stats->rx_packets++;
++		stats->rx_bytes += skb->len;
++		netif_receive_skb(skb);
++
++		/* put the new buffer on RX-free queue */
++#ifdef __ARMEB__
++		port->rx_buff_tab[n] = temp;
++		desc->data = phys;
++#endif
++		desc->buf_len = RX_SIZE;
++		desc->pkt_len = 0;
++		queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
++		quota--;
++		received++;
++	}
++	dev->quota -= received;
++	*budget -= received;
++#if DEBUG_RX
++	printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n");
++#endif
++	return 1;		/* not all work done */
++}
++
++
++static void hss_hdlc_txdone_irq(void *pdev)
++{
++	struct net_device *dev = pdev;
++	struct port *port = dev_to_port(dev);
++	struct net_device_stats *stats = hdlc_stats(dev);
++	int n_desc;
++
++#if DEBUG_TX
++	printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n");
++#endif
++	while ((n_desc = queue_get_desc(queue_ids[port->id].txdone,
++					port, 1)) >= 0) {
++		struct desc *desc;
++		int start;
++
++		desc = tx_desc_ptr(port, n_desc);
++
++		stats->tx_packets++;
++		stats->tx_bytes += desc->pkt_len;
++
++		dma_unmap_tx(port, desc);
++#if DEBUG_TX
++		printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n",
++		       port->netdev->name, port->tx_buff_tab[n_desc]);
++#endif
++		free_buffer_irq(port->tx_buff_tab[n_desc]);
++		port->tx_buff_tab[n_desc] = NULL;
++
++		start = qmgr_stat_empty(port->plat->txreadyq);
++		queue_put_desc(port->plat->txreadyq,
++			       tx_desc_phys(port, n_desc), desc);
++		if (start) {
++#if DEBUG_TX
++			printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
++			       " ready\n", port->netdev->name);
++#endif
++			netif_wake_queue(port->netdev);
++		}
++	}
++}
++
++static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct port *port = dev_to_port(dev);
++	struct net_device_stats *stats = hdlc_stats(dev);
++	unsigned int txreadyq = port->plat->txreadyq;
++	int len, offset, bytes, n;
++	void *mem;
++	u32 phys;
++	struct desc *desc;
++
++#if DEBUG_TX
++	printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name);
++#endif
++
++	if (unlikely(skb->len > HDLC_MAX_MRU)) {
++		dev_kfree_skb(skb);
++		stats->tx_errors++;
++		return NETDEV_TX_OK;
++	}
++
++	debug_pkt(dev, "hss_hdlc_xmit", skb->data, skb->len);
++
++	len = skb->len;
++#ifdef __ARMEB__
++	offset = 0; /* no need to keep alignment */
++	bytes = len;
++	mem = skb->data;
++#else
++	offset = (int)skb->data & 3; /* keep 32-bit alignment */
++	bytes = ALIGN(offset + len, 4);
++	if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
++		dev_kfree_skb(skb);
++		stats->tx_dropped++;
++		return NETDEV_TX_OK;
++	}
++	memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
++	dev_kfree_skb(skb);
++#endif
++
++	phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
++	if (dma_mapping_error(phys)) {
++#ifdef __ARMEB__
++		dev_kfree_skb(skb);
++#else
++		kfree(mem);
++#endif
++		stats->tx_dropped++;
++		return NETDEV_TX_OK;
++	}
++
++	n = queue_get_desc(txreadyq, port, 1);
++	BUG_ON(n < 0);
++	desc = tx_desc_ptr(port, n);
++
++#ifdef __ARMEB__
++	port->tx_buff_tab[n] = skb;
++#else
++	port->tx_buff_tab[n] = mem;
++#endif
++	desc->data = phys + offset;
++	desc->buf_len = desc->pkt_len = len;
++
++	wmb();
++	queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
++	dev->trans_start = jiffies;
++
++	if (qmgr_stat_empty(txreadyq)) {
++#if DEBUG_TX
++		printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
++#endif
++		netif_stop_queue(dev);
++		/* we could miss TX ready interrupt */
++		if (!qmgr_stat_empty(txreadyq)) {
++#if DEBUG_TX
++			printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
++			       dev->name);
++#endif
++			netif_wake_queue(dev);
++		}
++	}
++
++#if DEBUG_TX
++	printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name);
++#endif
++	return NETDEV_TX_OK;
++}
++
++
++static int request_hdlc_queues(struct port *port)
++{
++	int err;
++
++	err = qmgr_request_queue(queue_ids[port->id].rxfree, RX_DESCS, 0, 0);
++	if (err)
++		return err;
++
++	err = qmgr_request_queue(queue_ids[port->id].rx, RX_DESCS, 0, 0);
++	if (err)
++		goto rel_rxfree;
++
++	err = qmgr_request_queue(queue_ids[port->id].tx, TX_DESCS, 0, 0);
++	if (err)
++		goto rel_rx;
++
++	err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
++	if (err)
++		goto rel_tx;
++
++	err = qmgr_request_queue(queue_ids[port->id].txdone, TX_DESCS, 0, 0);
++	if (err)
++		goto rel_txready;
++	return 0;
++
++rel_txready:
++	qmgr_release_queue(port->plat->txreadyq);
++rel_tx:
++	qmgr_release_queue(queue_ids[port->id].tx);
++rel_rx:
++	qmgr_release_queue(queue_ids[port->id].rx);
++rel_rxfree:
++	qmgr_release_queue(queue_ids[port->id].rxfree);
++	printk(KERN_DEBUG "%s: unable to request hardware queues\n",
++	       port->netdev->name);
++	return err;
++}
++
++static void release_hdlc_queues(struct port *port)
++{
++	qmgr_release_queue(queue_ids[port->id].rxfree);
++	qmgr_release_queue(queue_ids[port->id].rx);
++	qmgr_release_queue(queue_ids[port->id].txdone);
++	qmgr_release_queue(queue_ids[port->id].tx);
++	qmgr_release_queue(port->plat->txreadyq);
++}
++
++static int init_hdlc_queues(struct port *port)
++{
++	int i;
++
++	if (!ports_open)
++		if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
++						 POOL_ALLOC_SIZE, 32, 0)))
++			return -ENOMEM;
++
++	if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
++					      &port->desc_tab_phys)))
++		return -ENOMEM;
++	memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
++	memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
++	memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
++
++	/* Setup RX buffers */
++	for (i = 0; i < RX_DESCS; i++) {
++		struct desc *desc = rx_desc_ptr(port, i);
++		buffer_t *buff;
++		void *data;
++#ifdef __ARMEB__
++		if (!(buff = netdev_alloc_skb(port->netdev, RX_SIZE)))
++			return -ENOMEM;
++		data = buff->data;
++#else
++		if (!(buff = kmalloc(RX_SIZE, GFP_KERNEL)))
++			return -ENOMEM;
++		data = buff;
++#endif
++		desc->buf_len = RX_SIZE;
++		desc->data = dma_map_single(&port->netdev->dev, data,
++					    RX_SIZE, DMA_FROM_DEVICE);
++		if (dma_mapping_error(desc->data)) {
++			free_buffer(buff);
++			return -EIO;
++		}
++		port->rx_buff_tab[i] = buff;
++	}
++
++	return 0;
++}
++
++static void destroy_hdlc_queues(struct port *port)
++{
++	int i;
++
++	if (port->desc_tab) {
++		for (i = 0; i < RX_DESCS; i++) {
++			struct desc *desc = rx_desc_ptr(port, i);
++			buffer_t *buff = port->rx_buff_tab[i];
++			if (buff) {
++				dma_unmap_single(&port->netdev->dev,
++						 desc->data, RX_SIZE,
++						 DMA_FROM_DEVICE);
++				free_buffer(buff);
++			}
++		}
++		for (i = 0; i < TX_DESCS; i++) {
++			struct desc *desc = tx_desc_ptr(port, i);
++			buffer_t *buff = port->tx_buff_tab[i];
++			if (buff) {
++				dma_unmap_tx(port, desc);
++				free_buffer(buff);
++			}
++		}
++		dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
++		port->desc_tab = NULL;
++	}
++
++	if (!ports_open && dma_pool) {
++		dma_pool_destroy(dma_pool);
++		dma_pool = NULL;
++	}
++}
++
++static int hss_hdlc_open(struct net_device *dev)
++{
++	struct port *port = dev_to_port(dev);
++	struct npe *npe = port->npe;
++	struct msg msg;
++	int i, err;
++
++	if (!npe_running(npe)) {
++		err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
++		if (err)
++			return err;
++	}
++
++	if ((err = hdlc_open(dev)) != 0)
++		return err;
++
++	if (port->plat->open)
++		if ((err = port->plat->open(port->id, port->netdev,
++					    hss_hdlc_set_carrier)) != 0)
++			goto err_hdlc_close;
++
++	/* HSS main configuration */
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_WRITE;
++	msg.hss_port = port->id;
++	msg.index = 0;		/* offset in HSS config */
++
++	msg.data32 = PCR_FRM_PULSE_DISABLED |
++		PCR_SOF_NO_FBIT |
++		PCR_MSB_ENDIAN |
++		PCR_TX_DATA_ENABLE;
++
++	if (port->clock_type == CLOCK_INT)
++		msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT;
++
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_PCR") != 0))
++		goto err_plat_close; /* 0: TX PCR */
++
++	msg.index = 4;
++	msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING;
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_PCR") != 0))
++		goto err_plat_close; /* 4: RX PCR */
++
++	msg.index = 8;
++	msg.data32 = (port->loopback ? CCR_LOOPBACK : 0) |
++		(port->id ? CCR_SECOND_HSS : 0);
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_CORE_CR") != 0))
++		goto err_plat_close; /* 8: Core CR */
++
++	msg.index = 12;
++	msg.data32 = CLK42X_SPEED_2048KHZ /* FIXME */;
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_CLK_CR") != 0))
++		goto err_plat_close; /* 12: CLK CR */
++
++	msg.data32 = (FRAME_SYNC_OFFSET << 16) | (FRAME_SYNC_SIZE - 1);
++	msg.index = 16;
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_FCR") != 0))
++		goto err_plat_close; /* 16: TX FCR */
++
++	msg.index = 20;
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_FCR") != 0))
++		goto err_plat_close; /* 20: RX FCR */
++
++	msg.data32 = 0;		/* Fill LUT with HDLC timeslots */
++	for (i = 0; i < 32 / LUT_BITS; i++)
++		msg.data32 |= TDMMAP_HDLC << (LUT_BITS * i);
++
++	for (i = 0; i < 2 /* TX and RX */ * TIMESLOTS * LUT_BITS / 8; i += 4) {
++		msg.index = 24 + i; /* 24 - 55: TX LUT, 56 - 87: RX LUT */
++		if ((err = npe_send_message(npe, &msg, "HSS_SET_LUT") != 0))
++			goto err_plat_close;
++	}
++
++	/* HDLC mode configuration */
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PKT_NUM_PIPES_WRITE;
++	msg.hss_port = port->id;
++	msg.data8a = PKT_NUM_PIPES;
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_PIPES") != 0))
++		goto err_plat_close;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE;
++	msg.hss_port = port->id;
++	msg.data8a = PKT_PIPE_FIFO_SIZEW;
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_FIFO") != 0))
++		goto err_plat_close;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE;
++	msg.hss_port = port->id;
++	msg.data32 = 0x7F7F7F7F;
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_IDLE") != 0))
++		goto err_plat_close;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PORT_CONFIG_LOAD;
++	msg.hss_port = port->id;
++	if ((err = npe_send_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
++		goto err_plat_close;
++	if ((err = npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
++		goto err_plat_close;
++
++	/* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
++	if (msg.cmd != PORT_CONFIG_LOAD || msg.data32) {
++		printk(KERN_DEBUG "%s: unexpected message received in"
++		       " response to HSS_LOAD_CONFIG\n", npe_name(npe));
++		err = EIO;
++		goto err_plat_close;
++	}
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PKT_PIPE_HDLC_CFG_WRITE;
++	msg.hss_port = port->id;
++	msg.data8a = port->hdlc_cfg; /* rx_cfg */
++	msg.data8b = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_HDLC_CFG") != 0))
++		goto err_plat_close;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PKT_PIPE_MODE_WRITE;
++	msg.hss_port = port->id;
++	msg.data8a = NPE_PKT_MODE_HDLC;
++	/* msg.data8b = inv_mask */
++	/* msg.data8c = or_mask */
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_MODE") != 0))
++		goto err_plat_close;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PKT_PIPE_RX_SIZE_WRITE;
++	msg.hss_port = port->id;
++	msg.data16a = HDLC_MAX_MRU;
++	if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_RX_SIZE") != 0))
++		goto err_plat_close;
++
++	if ((err = request_hdlc_queues(port)) != 0)
++		goto err_plat_close;
++
++	if ((err = init_hdlc_queues(port)) != 0)
++		goto err_destroy_queues;
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PKT_PIPE_FLOW_ENABLE;
++	msg.hss_port = port->id;
++	if ((err = npe_send_message(npe, &msg, "HSS_ENABLE_PKT_PIPE") != 0))
++		goto err_destroy_queues;
++
++	/* Populate queues with buffers, no failure after this point */
++	for (i = 0; i < TX_DESCS; i++)
++		queue_put_desc(port->plat->txreadyq,
++			       tx_desc_phys(port, i), tx_desc_ptr(port, i));
++
++	for (i = 0; i < RX_DESCS; i++)
++		queue_put_desc(queue_ids[port->id].rxfree,
++			       rx_desc_phys(port, i), rx_desc_ptr(port, i));
++
++	netif_start_queue(dev);
++
++	qmgr_set_irq(queue_ids[port->id].rx, QUEUE_IRQ_SRC_NOT_EMPTY,
++		     hss_hdlc_rx_irq, dev);
++
++	qmgr_set_irq(queue_ids[port->id].txdone, QUEUE_IRQ_SRC_NOT_EMPTY,
++		     hss_hdlc_txdone_irq, dev);
++	qmgr_enable_irq(queue_ids[port->id].txdone);
++
++	ports_open++;
++	netif_rx_schedule(dev); /* we may already have RX data, enables IRQ */
++	return 0;
++
++err_destroy_queues:
++	destroy_hdlc_queues(port);
++	release_hdlc_queues(port);
++err_plat_close:
++	if (port->plat->close)
++		port->plat->close(port->id, port->netdev);
++err_hdlc_close:
++	hdlc_close(dev);
++	return err;
++}
++
++static int hss_hdlc_close(struct net_device *dev)
++{
++	struct port *port = dev_to_port(dev);
++	struct npe *npe = port->npe;
++	struct msg msg;
++	int buffs = RX_DESCS; /* allocated RX buffers */
++	int i;
++
++	ports_open--;
++	qmgr_disable_irq(queue_ids[port->id].rx);
++	netif_stop_queue(dev);
++
++	memset(&msg, 0, sizeof(msg));
++	msg.cmd = PKT_PIPE_FLOW_DISABLE;
++	msg.hss_port = port->id;
++	if (npe_send_message(npe, &msg, "HSS_DISABLE_PKT_PIPE")) {
++		printk(KERN_CRIT "HSS-%i: unable to stop HDLC flow\n",
++		       port->id);
++		/* The upper level would ignore the error anyway */
++	}
++
++	while (queue_get_desc(queue_ids[port->id].rxfree, port, 0) >= 0)
++		buffs--;
++	while (queue_get_desc(queue_ids[port->id].rx, port, 0) >= 0)
++		buffs--;
++
++	if (buffs)
++		printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
++		       " left in NPE\n", dev->name, buffs);
++
++	buffs = TX_DESCS;
++	while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0)
++		buffs--; /* cancel TX */
++
++	i = 0;
++	do {
++		while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
++			buffs--;
++		if (!buffs)
++			break;
++	} while (++i < MAX_CLOSE_WAIT);
++
++	if (buffs)
++		printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
++		       "left in NPE\n", dev->name, buffs);
++#if DEBUG_CLOSE
++	if (!buffs)
++		printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
++#endif
++	qmgr_disable_irq(queue_ids[port->id].txdone);
++	destroy_hdlc_queues(port);
++	release_hdlc_queues(port);
++
++	if (port->plat->close)
++		port->plat->close(port->id, port->netdev);
++	hdlc_close(dev);
++	return 0;
++}
++
++
++static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
++			   unsigned short parity)
++{
++	struct port *port = dev_to_port(dev);
++
++	if (encoding != ENCODING_NRZ)
++		return -EINVAL;
++
++	switch(parity) {
++	case PARITY_CRC16_PR1_CCITT:
++		port->hdlc_cfg = 0;
++		return 0;
++
++	case PARITY_CRC32_PR1_CCITT:
++		port->hdlc_cfg = PKT_HDLC_CRC_32;
++		return 0;
++
++	default:
++		return -EINVAL;
++	}
++}
++
++
++static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++	const size_t size = sizeof(sync_serial_settings);
++	sync_serial_settings new_line;
++	int clk;
++	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
++	struct port *port = dev_to_port(dev);
++
++	if (cmd != SIOCWANDEV)
++		return hdlc_ioctl(dev, ifr, cmd);
++
++	switch(ifr->ifr_settings.type) {
++	case IF_GET_IFACE:
++		ifr->ifr_settings.type = IF_IFACE_V35;
++		if (ifr->ifr_settings.size < size) {
++			ifr->ifr_settings.size = size; /* data size wanted */
++			return -ENOBUFS;
++		}
++		memset(&new_line, 0, sizeof(new_line));
++		new_line.clock_type = port->clock_type;
++		new_line.clock_rate = port->clock_rate;
++		new_line.loopback = port->loopback;
++		if (copy_to_user(line, &new_line, size))
++			return -EFAULT;
++		return 0;
++
++	case IF_IFACE_SYNC_SERIAL:
++	case IF_IFACE_V35:
++		if(!capable(CAP_NET_ADMIN))
++			return -EPERM;
++		if (dev->flags & IFF_UP)
++			return -EBUSY; /* Cannot change parameters when open */
++
++		if (copy_from_user(&new_line, line, size))
++			return -EFAULT;
++
++		clk = new_line.clock_type;
++		if (port->plat->set_clock)
++			clk = port->plat->set_clock(port->id, clk);
++
++		if (clk != CLOCK_EXT && clk != CLOCK_INT)
++			return -EINVAL;	/* No such clock setting */
++
++		if (new_line.loopback != 0 && new_line.loopback != 1)
++			return -EINVAL;
++
++		port->clock_type = clk; /* Update settings */
++		port->clock_rate = new_line.clock_rate;
++		port->loopback = new_line.loopback;
++		return 0;
++
++	default:
++		return hdlc_ioctl(dev, ifr, cmd);
++	}
++}
++
++
++static int __devinit hss_init_one(struct platform_device *pdev)
++{
++	struct port *port;
++	struct net_device *dev;
++	hdlc_device *hdlc;
++	int err;
++
++	if ((port = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
++		return -ENOMEM;
++	platform_set_drvdata(pdev, port);
++	port->id = pdev->id;
++
++	if ((port->npe = npe_request(0)) == NULL) {
++		err = -ENOSYS;
++		goto err_free;
++	}
++
++	port->plat = pdev->dev.platform_data;
++	if ((port->netdev = dev = alloc_hdlcdev(port)) == NULL) {
++		err = -ENOMEM;
++		goto err_plat;
++	}
++
++	SET_MODULE_OWNER(net);
++	SET_NETDEV_DEV(dev, &pdev->dev);
++	hdlc = dev_to_hdlc(dev);
++	hdlc->attach = hss_hdlc_attach;
++	hdlc->xmit = hss_hdlc_xmit;
++	dev->open = hss_hdlc_open;
++	dev->poll = hss_hdlc_poll;
++	dev->stop = hss_hdlc_close;
++	dev->do_ioctl = hss_hdlc_ioctl;
++	dev->weight = 16;
++	dev->tx_queue_len = 100;
++	port->clock_type = CLOCK_EXT;
++	port->clock_rate = 2048000;
++
++	if (register_hdlc_device(dev)) {
++		printk(KERN_ERR "HSS-%i: unable to register HDLC device\n",
++		       port->id);
++		err = -ENOBUFS;
++		goto err_free_netdev;
++	}
++	printk(KERN_INFO "%s: HSS-%i\n", dev->name, port->id);
++	return 0;
++
++err_free_netdev:
++	free_netdev(dev);
++err_plat:
++	npe_release(port->npe);
++	platform_set_drvdata(pdev, NULL);
++err_free:
++	kfree(port);
++	return err;
++}
++
++static int __devexit hss_remove_one(struct platform_device *pdev)
++{
++	struct port *port = platform_get_drvdata(pdev);
++
++	unregister_hdlc_device(port->netdev);
++	free_netdev(port->netdev);
++	npe_release(port->npe);
++	platform_set_drvdata(pdev, NULL);
++	kfree(port);
++	return 0;
++}
++
++static struct platform_driver drv = {
++	.driver.name	= DRV_NAME,
++	.probe		= hss_init_one,
++	.remove		= hss_remove_one,
++};
++
++static int __init hss_init_module(void)
++{
++	if ((ixp4xx_read_feature_bits() &
++	     (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
++	    (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
++		return -ENOSYS;
++	return platform_driver_register(&drv);
++}
++
++static void __exit hss_cleanup_module(void)
++{
++	platform_driver_unregister(&drv);
++}
++
++MODULE_AUTHOR("Krzysztof Halasa");
++MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
++MODULE_LICENSE("GPL v2");
++module_init(hss_init_module);
++module_exit(hss_cleanup_module);
+diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h
+index d2523b3..2fa3d6b 100644
+--- a/include/asm-arm/arch-ixp4xx/cpu.h
++++ b/include/asm-arm/arch-ixp4xx/cpu.h
+@@ -28,4 +28,19 @@ extern unsigned int processor_id;
+ #define cpu_is_ixp46x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+ 			  IXP465_PROCESSOR_ID_VALUE)
+ 
++static inline u32 ixp4xx_read_feature_bits(void)
++{
++	unsigned int val = ~*IXP4XX_EXP_CFG2;
++	val &= ~IXP4XX_FEATURE_RESERVED;
++	if (!cpu_is_ixp46x())
++		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
++
++	return val;
++}
++
++static inline void ixp4xx_write_feature_bits(u32 value)
++{
++	*IXP4XX_EXP_CFG2 = ~value;
++}
++
+ #endif  /* _ASM_ARCH_CPU_H */
+diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
+index 297ceda..73e8dc3 100644
+--- a/include/asm-arm/arch-ixp4xx/hardware.h
++++ b/include/asm-arm/arch-ixp4xx/hardware.h
+@@ -27,13 +27,13 @@
+ 
+ #define pcibios_assign_all_busses()	1
+ 
++/* Register locations and bits */
++#include "ixp4xx-regs.h"
++
+ #ifndef __ASSEMBLER__
+ #include <asm/arch/cpu.h>
+ #endif
+ 
+-/* Register locations and bits */
+-#include "ixp4xx-regs.h"
+-
+ /* Platform helper functions and definitions */
+ #include "platform.h"
+ 
+diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+index 5d949d7..c704fe8 100644
+--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
++++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+@@ -15,10 +15,6 @@
+  *
+  */
+ 
+-#ifndef __ASM_ARCH_HARDWARE_H__
+-#error "Do not include this directly, instead #include <asm/hardware.h>"
+-#endif
+-
+ #ifndef _ASM_ARM_IXP4XX_H_
+ #define _ASM_ARM_IXP4XX_H_
+ 
+@@ -607,4 +603,36 @@
+ 
+ #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+ 
++/* "fuse" bits of IXP_EXP_CFG2 */
++#define IXP4XX_FEATURE_RCOMP		(1 << 0)
++#define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
++#define IXP4XX_FEATURE_HASH		(1 << 2)
++#define IXP4XX_FEATURE_AES		(1 << 3)
++#define IXP4XX_FEATURE_DES		(1 << 4)
++#define IXP4XX_FEATURE_HDLC		(1 << 5)
++#define IXP4XX_FEATURE_AAL		(1 << 6)
++#define IXP4XX_FEATURE_HSS		(1 << 7)
++#define IXP4XX_FEATURE_UTOPIA		(1 << 8)
++#define IXP4XX_FEATURE_NPEB_ETH0	(1 << 9)
++#define IXP4XX_FEATURE_NPEC_ETH		(1 << 10)
++#define IXP4XX_FEATURE_RESET_NPEA	(1 << 11)
++#define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
++#define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
++#define IXP4XX_FEATURE_PCI		(1 << 14)
++#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
++#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
++#define IXP4XX_FEATURE_USB_HOST		(1 << 18)
++#define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
++#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
++#define IXP4XX_FEATURE_RSA		(1 << 21)
++#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
++#define IXP4XX_FEATURE_RESERVED		(0xFF << 24)
++
++#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC |	\
++				    IXP4XX_FEATURE_USB_HOST |		\
++				    IXP4XX_FEATURE_NPEA_ETH |		\
++				    IXP4XX_FEATURE_NPEB_ETH_1_TO_3 |	\
++				    IXP4XX_FEATURE_RSA |		\
++				    IXP4XX_FEATURE_XSCALE_MAX_FREQ)
++
+ #endif
+diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/include/asm-arm/arch-ixp4xx/npe.h
+new file mode 100644
+index 0000000..37d0511
+--- /dev/null
++++ b/include/asm-arm/arch-ixp4xx/npe.h
+@@ -0,0 +1,39 @@
++#ifndef __IXP4XX_NPE_H
++#define __IXP4XX_NPE_H
++
++#include <linux/kernel.h>
++
++extern const char *npe_names[];
++
++struct npe_regs {
++	u32 exec_addr, exec_data, exec_status_cmd, exec_count;
++	u32 action_points[4];
++	u32 watchpoint_fifo, watch_count;
++	u32 profile_count;
++	u32 messaging_status, messaging_control;
++	u32 mailbox_status, /*messaging_*/ in_out_fifo;
++};
++
++struct npe {
++	struct resource *mem_res;
++	struct npe_regs __iomem *regs;
++	u32 regs_phys;
++	int id;
++	int valid;
++};
++
++
++static inline const char *npe_name(struct npe *npe)
++{
++	return npe_names[npe->id];
++}
++
++int npe_running(struct npe *npe);
++int npe_send_message(struct npe *npe, const void *msg, const char *what);
++int npe_recv_message(struct npe *npe, void *msg, const char *what);
++int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
++int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
++struct npe *npe_request(int id);
++void npe_release(struct npe *npe);
++
++#endif /* __IXP4XX_NPE_H */
+diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
+index 2a44d3d..695b9c4 100644
+--- a/include/asm-arm/arch-ixp4xx/platform.h
++++ b/include/asm-arm/arch-ixp4xx/platform.h
+@@ -77,8 +77,7 @@ extern unsigned long ixp4xx_exp_bus_size;
+ 
+ /*
+  * The IXP4xx chips do not have an I2C unit, so GPIO lines are just
+- * used to 
+- * Used as platform_data to provide GPIO pin information to the ixp42x
++ * used as platform_data to provide GPIO pin information to the ixp42x
+  * I2C driver.
+  */
+ struct ixp4xx_i2c_pins {
+@@ -86,6 +85,27 @@ struct ixp4xx_i2c_pins {
+ 	unsigned long scl_pin;
+ };
+ 
++#define IXP4XX_ETH_NPEA		0x00
++#define IXP4XX_ETH_NPEB		0x10
++#define IXP4XX_ETH_NPEC		0x20
++
++/* Information about built-in Ethernet MAC interfaces */
++struct eth_plat_info {
++	u8 phy;		/* MII PHY ID, 0 - 31 */
++	u8 rxq;		/* configurable, currently 0 - 31 only */
++	u8 txreadyq;
++	u8 hwaddr[6];
++};
++
++/* Information about built-in HSS (synchronous serial) interfaces */
++struct hss_plat_info {
++	int (*set_clock)(int port, unsigned int clock_type);
++	int (*open)(int port, void *pdev,
++		    void (*set_carrier_cb)(void *pdev, int carrier));
++	void (*close)(int port, void *pdev);
++	u8 txreadyq;
++};
++
+ /*
+  * This structure provide a means for the board setup code
+  * to give information to th pata_ixp4xx driver. It is
+diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/include/asm-arm/arch-ixp4xx/qmgr.h
+new file mode 100644
+index 0000000..1e52b95
+--- /dev/null
++++ b/include/asm-arm/arch-ixp4xx/qmgr.h
+@@ -0,0 +1,126 @@
++/*
++ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ */
++
++#ifndef IXP4XX_QMGR_H
++#define IXP4XX_QMGR_H
++
++#include <linux/io.h>
++#include <linux/kernel.h>
++
++#define HALF_QUEUES	32
++#define QUEUES		64	/* only 32 lower queues currently supported */
++#define MAX_QUEUE_LENGTH 4	/* in dwords */
++
++#define QUEUE_STAT1_EMPTY		1 /* queue status bits */
++#define QUEUE_STAT1_NEARLY_EMPTY	2
++#define QUEUE_STAT1_NEARLY_FULL		4
++#define QUEUE_STAT1_FULL		8
++#define QUEUE_STAT2_UNDERFLOW		1
++#define QUEUE_STAT2_OVERFLOW		2
++
++#define QUEUE_WATERMARK_0_ENTRIES	0
++#define QUEUE_WATERMARK_1_ENTRY		1
++#define QUEUE_WATERMARK_2_ENTRIES	2
++#define QUEUE_WATERMARK_4_ENTRIES	3
++#define QUEUE_WATERMARK_8_ENTRIES	4
++#define QUEUE_WATERMARK_16_ENTRIES	5
++#define QUEUE_WATERMARK_32_ENTRIES	6
++#define QUEUE_WATERMARK_64_ENTRIES	7
++
++/* queue interrupt request conditions */
++#define QUEUE_IRQ_SRC_EMPTY		0
++#define QUEUE_IRQ_SRC_NEARLY_EMPTY	1
++#define QUEUE_IRQ_SRC_NEARLY_FULL	2
++#define QUEUE_IRQ_SRC_FULL		3
++#define QUEUE_IRQ_SRC_NOT_EMPTY		4
++#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY	5
++#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL	6
++#define QUEUE_IRQ_SRC_NOT_FULL		7
++
++struct qmgr_regs {
++	u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
++	u32 stat1[4];		/* 0x400 - 0x40F */
++	u32 stat2[2];		/* 0x410 - 0x417 */
++	u32 statne_h;		/* 0x418 - queue nearly empty */
++	u32 statf_h;		/* 0x41C - queue full */
++	u32 irqsrc[4];		/* 0x420 - 0x42F IRC source */
++	u32 irqen[2];		/* 0x430 - 0x437 IRQ enabled */
++	u32 irqstat[2];		/* 0x438 - 0x43F - IRQ access only */
++	u32 reserved[1776];
++	u32 sram[2048];		/* 0x2000 - 0x3FFF - config and buffer */
++};
++
++void qmgr_set_irq(unsigned int queue, int src,
++		  void (*handler)(void *pdev), void *pdev);
++void qmgr_enable_irq(unsigned int queue);
++void qmgr_disable_irq(unsigned int queue);
++
++/* request_ and release_queue() must be called from non-IRQ context */
++int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
++		       unsigned int nearly_empty_watermark,
++		       unsigned int nearly_full_watermark);
++void qmgr_release_queue(unsigned int queue);
++
++
++static inline void qmgr_put_entry(unsigned int queue, u32 val)
++{
++	extern struct qmgr_regs __iomem *qmgr_regs;
++	__raw_writel(val, &qmgr_regs->acc[queue][0]);
++}
++
++static inline u32 qmgr_get_entry(unsigned int queue)
++{
++	extern struct qmgr_regs __iomem *qmgr_regs;
++	return __raw_readl(&qmgr_regs->acc[queue][0]);
++}
++
++static inline int qmgr_get_stat1(unsigned int queue)
++{
++	extern struct qmgr_regs __iomem *qmgr_regs;
++	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
++		>> ((queue & 7) << 2)) & 0xF;
++}
++
++static inline int qmgr_get_stat2(unsigned int queue)
++{
++	extern struct qmgr_regs __iomem *qmgr_regs;
++	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
++		>> ((queue & 0xF) << 1)) & 0x3;
++}
++
++static inline int qmgr_stat_empty(unsigned int queue)
++{
++	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
++}
++
++static inline int qmgr_stat_nearly_empty(unsigned int queue)
++{
++	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
++}
++
++static inline int qmgr_stat_nearly_full(unsigned int queue)
++{
++	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
++}
++
++static inline int qmgr_stat_full(unsigned int queue)
++{
++	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
++}
++
++static inline int qmgr_stat_underflow(unsigned int queue)
++{
++	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
++}
++
++static inline int qmgr_stat_overflow(unsigned int queue)
++{
++	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
++}
++
++#endif
+diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h
+index f7a35b7..34ef48f 100644
+--- a/include/asm-arm/arch-ixp4xx/uncompress.h
++++ b/include/asm-arm/arch-ixp4xx/uncompress.h
+@@ -13,7 +13,7 @@
+ #ifndef _ARCH_UNCOMPRESS_H_
+ #define _ARCH_UNCOMPRESS_H_
+ 
+-#include <asm/hardware.h>
++#include "ixp4xx-regs.h"
+ #include <asm/mach-types.h>
+ #include <linux/serial_reg.h>
+ 
diff --git a/target/linux/ixp4xx/patches-2.6.24/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-2.6.24/201-npe_driver_print_license_location.patch
new file mode 100644
index 000000000..fad403341
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/201-npe_driver_print_license_location.patch
@@ -0,0 +1,12 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixp4xx_npe.c linux-2.6.23-openwrt/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/ixp4xx_npe.c	2007-10-22 22:18:15.000000000 +0200
++++ linux-2.6.23-openwrt/arch/arm/mach-ixp4xx/ixp4xx_npe.c	2007-10-22 22:32:48.000000000 +0200
+@@ -585,6 +585,8 @@
+ 	npe_reset(npe);
+ #endif
+ 
++	print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
++
+ 	print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
+ 		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
+ 		  (image->id >> 8) & 0xFF, image->id & 0xFF);
diff --git a/target/linux/ixp4xx/patches-2.6.24/294-eeprom_new_notifier.patch b/target/linux/ixp4xx/patches-2.6.24/294-eeprom_new_notifier.patch
new file mode 100644
index 000000000..4aa7a988b
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/294-eeprom_new_notifier.patch
@@ -0,0 +1,187 @@
+diff -uprN linux-2.6.23.orig/drivers/i2c/chips/eeprom.c linux-2.6.23/drivers/i2c/chips/eeprom.c
+--- linux-2.6.23.orig/drivers/i2c/chips/eeprom.c	2007-10-09 15:31:38.000000000 -0500
++++ linux-2.6.23/drivers/i2c/chips/eeprom.c	2007-10-11 00:57:25.000000000 -0500
+@@ -33,6 +33,8 @@
+ #include <linux/jiffies.h>
+ #include <linux/i2c.h>
+ #include <linux/mutex.h>
++#include <linux/notifier.h>
++#include <linux/eeprom.h>
+ 
+ /* Addresses to scan */
+ static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
+@@ -41,26 +43,7 @@ static unsigned short normal_i2c[] = { 0
+ /* Insmod parameters */
+ I2C_CLIENT_INSMOD_1(eeprom);
+ 
+-
+-/* Size of EEPROM in bytes */
+-#define EEPROM_SIZE		256
+-
+-/* possible types of eeprom devices */
+-enum eeprom_nature {
+-	UNKNOWN,
+-	VAIO,
+-};
+-
+-/* Each client has this additional data */
+-struct eeprom_data {
+-	struct i2c_client client;
+-	struct mutex update_lock;
+-	u8 valid;			/* bitfield, bit!=0 if slice is valid */
+-	unsigned long last_updated[8];	/* In jiffies, 8 slices */
+-	u8 data[EEPROM_SIZE];		/* Register values */
+-	enum eeprom_nature nature;
+-};
+-
++ATOMIC_NOTIFIER_HEAD(eeprom_chain);
+ 
+ static int eeprom_attach_adapter(struct i2c_adapter *adapter);
+ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
+@@ -191,6 +174,7 @@ static int eeprom_detect(struct i2c_adap
+ 	data->valid = 0;
+ 	mutex_init(&data->update_lock);
+ 	data->nature = UNKNOWN;
++	data->attr = &eeprom_attr;
+ 
+ 	/* Tell the I2C layer a new client has arrived */
+ 	if ((err = i2c_attach_client(new_client)))
+@@ -214,6 +198,9 @@ static int eeprom_detect(struct i2c_adap
+ 	if (err)
+ 		goto exit_detach;
+ 
++	/* call the notifier chain */
++	atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data);
++
+ 	return 0;
+ 
+ exit_detach:
+@@ -239,6 +226,41 @@ static int eeprom_detach_client(struct i
+ 	return 0;
+ }
+ 
++/**
++ * register_eeprom_notifier - register a 'user' of EEPROM devices.
++ * @nb: pointer to notifier info structure
++ *
++ * Registers a callback function to be called upon detection
++ * of an EEPROM device.  Detection invokes the 'add' callback
++ * with the kobj of the mutex and a bin_attribute which allows
++ * read from the EEPROM.  The intention is that the notifier
++ * will be able to read system configuration from the notifier.
++ *
++ * Only EEPROMs detected *after* the addition of the notifier
++ * are notified.  I.e. EEPROMs already known to the system
++ * will not be notified - add the notifier from board level
++ * code!
++ */
++int register_eeprom_notifier(struct notifier_block *nb)
++{
++	return atomic_notifier_chain_register(&eeprom_chain, nb);
++}
++
++/**
++ *	unregister_eeprom_notifier - unregister a 'user' of EEPROM devices.
++ *	@old: pointer to notifier info structure
++ *
++ *	Removes a callback function from the list of 'users' to be
++ *	notified upon detection of EEPROM devices.
++ */
++int unregister_eeprom_notifier(struct notifier_block *nb)
++{
++	return atomic_notifier_chain_unregister(&eeprom_chain, nb);
++}
++
++EXPORT_SYMBOL_GPL(register_eeprom_notifier);
++EXPORT_SYMBOL_GPL(unregister_eeprom_notifier);
++
+ static int __init eeprom_init(void)
+ {
+ 	return i2c_add_driver(&eeprom_driver);
+diff -uprN linux-2.6.23.orig/include/linux/eeprom.h linux-2.6.23/include/linux/eeprom.h
+--- linux-2.6.23.orig/include/linux/eeprom.h	1969-12-31 18:00:00.000000000 -0600
++++ linux-2.6.23/include/linux/eeprom.h	2007-10-11 00:57:25.000000000 -0500
+@@ -0,0 +1,71 @@
++#ifndef _LINUX_EEPROM_H
++#define _LINUX_EEPROM_H
++/*
++ *  EEPROM notifier header
++ *
++ *  Copyright (C) 2006 John Bowler
++ */
++
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __KERNEL__
++#error This is a kernel header
++#endif
++
++#include <linux/list.h>
++#include <linux/kobject.h>
++#include <linux/sysfs.h>
++
++/* Size of EEPROM in bytes */
++#define EEPROM_SIZE             256
++
++/* possible types of eeprom devices */
++enum eeprom_nature {
++	UNKNOWN,
++	VAIO,
++};
++
++/* Each client has this additional data */
++struct eeprom_data {
++	struct i2c_client client;
++	struct mutex update_lock;
++	u8 valid;			/* bitfield, bit!=0 if slice is valid */
++	unsigned long last_updated[8];	/* In jiffies, 8 slices */
++	u8 data[EEPROM_SIZE];		/* Register values */
++	enum eeprom_nature nature;
++	struct bin_attribute *attr;
++};
++
++/*
++ * This is very basic.
++ *
++ * If an EEPROM is detected on the I2C bus (this only works for
++ * I2C EEPROMs) the notifier chain  is called with
++ * both the I2C information and the kobject for the sysfs
++ * device which has been registers.  It is then possible to
++ * read from the device via the bin_attribute::read method
++ * to extract configuration information.
++ *
++ * Register the notifier in the board level code, there is no
++ * need to unregister it but you can if you want (it will save
++ * a little bit or kernel memory to do so).
++ */
++
++extern int register_eeprom_notifier(struct notifier_block *nb);
++extern int unregister_eeprom_notifier(struct notifier_block *nb);
++
++#endif /* _LINUX_EEPROM_H */
+diff -uprN linux-2.6.23.orig/include/linux/notifier.h linux-2.6.23/include/linux/notifier.h
+--- linux-2.6.23.orig/include/linux/notifier.h	2007-10-09 15:31:38.000000000 -0500
++++ linux-2.6.23/include/linux/notifier.h	2007-10-11 00:57:25.000000000 -0500
+@@ -231,5 +231,8 @@ static inline int notifier_to_errno(int 
+ #define PM_SUSPEND_PREPARE	0x0003 /* Going to suspend the system */
+ #define PM_POST_SUSPEND		0x0004 /* Suspend finished */
+ 
++/* eeprom notifier chain */
++#define EEPROM_REGISTER		0x0001
++
+ #endif /* __KERNEL__ */
+ #endif /* _LINUX_NOTIFIER_H */
diff --git a/target/linux/ixp4xx/patches-2.6.24/296-avila_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/296-avila_mac_plat_info.patch
new file mode 100644
index 000000000..e4813fe2c
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/296-avila_mac_plat_info.patch
@@ -0,0 +1,43 @@
+diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
+index e38f45f..10ed5d6 100644
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -132,10 +132,37 @@ static struct platform_device avila_pata = {
+ 	.resource		= avila_pata_resources,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info avila_plat_eth[] = {
++        {
++                .phy            = 0,
++                .rxq            = 3,
++		.txreadyq	= 20,
++        }, {
++                .phy            = 1,
++                .rxq            = 4,
++		.txreadyq	= 21,
++	}
++};
++
++static struct platform_device avila_eth[] = {
++        {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEB,
++                .dev.platform_data      = avila_plat_eth,
++        }, {
++                .name                   = "ixp4xx_eth",
++                .id                     = IXP4XX_ETH_NPEC,
++                .dev.platform_data      = avila_plat_eth + 1,
++	}
++};
++
+ static struct platform_device *avila_devices[] __initdata = {
+ 	&avila_i2c_gpio,
+ 	&avila_flash,
+-	&avila_uart
++	&avila_uart,
++	&avila_eth[0],
++	&avila_eth[1],
+ };
+ 
+ static void __init avila_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/298-avila_rtc_fixup.patch b/target/linux/ixp4xx/patches-2.6.24/298-avila_rtc_fixup.patch
new file mode 100644
index 000000000..f706c100a
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/298-avila_rtc_fixup.patch
@@ -0,0 +1,55 @@
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.23/arch/arm/mach-ixp4xx/avila-setup.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/avila-setup.c	2007-10-09 15:31:38.000000000 -0500
++++ linux-2.6.23/arch/arm/mach-ixp4xx/avila-setup.c	2007-10-11 01:08:21.000000000 -0500
+@@ -138,6 +138,35 @@ static struct platform_device *avila_dev
+ 	&avila_uart
+ };
+ 
++static char avila_rtc_probe[] __initdata = "rtc-ds1672.probe=0,0x68 ";
++
++static void __init avila_fixup(struct machine_desc *desc,
++                struct tag *tags, char **cmdline, struct meminfo *mi)
++{
++    struct tag *t = tags;
++    char *p = *cmdline;
++
++    /* Find the end of the tags table, taking note of any cmdline tag. */
++    for (; t->hdr.size; t = tag_next(t)) {
++        if (t->hdr.tag == ATAG_CMDLINE) {
++            p = t->u.cmdline.cmdline;
++        }
++    }
++
++    /* Overwrite the end of the table with a new cmdline tag. */
++    t->hdr.tag = ATAG_CMDLINE;
++    t->hdr.size = (sizeof (struct tag_header) +
++        strlen(avila_rtc_probe) + strlen(p) + 1 + 4) >> 2;
++    strlcpy(t->u.cmdline.cmdline, avila_rtc_probe, COMMAND_LINE_SIZE);
++    strlcpy(t->u.cmdline.cmdline + strlen(avila_rtc_probe), p,
++        COMMAND_LINE_SIZE - strlen(avila_rtc_probe));
++
++    /* Terminate the table. */
++    t = tag_next(t);
++    t->hdr.tag = ATAG_NONE;
++    t->hdr.size = 0;
++}
++
+ static void __init avila_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -165,6 +194,7 @@ MACHINE_START(AVILA, "Gateworks Avila Ne
+ 	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++	.fixup          = avila_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer		= &ixp4xx_timer,
+@@ -182,6 +212,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc 
+ 	/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++	.fixup          = avila_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer		= &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.24/300-avila_fetch_mac.patch b/target/linux/ixp4xx/patches-2.6.24/300-avila_fetch_mac.patch
new file mode 100644
index 000000000..2a987588b
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/300-avila_fetch_mac.patch
@@ -0,0 +1,72 @@
+diff -r -u linux-2.6.23.12/arch/arm/mach-ixp4xx/avila-setup.c ../../../../trunk/build_dir/linux-ixp4xx_generic/linux-2.6.23.12/arch/arm/mach-ixp4xx/avila-setup.c
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/avila-setup.c	2008-01-04 01:28:24.134925761 +0100
++++ ../../../../trunk/build_dir/linux-ixp4xx_generic/linux-2.6.23.12/arch/arm/mach-ixp4xx/avila-setup.c	2008-01-04 01:23:27.874042817 +0100
+@@ -14,10 +14,18 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/device.h>
++#include <linux/if_ether.h>
++#include <linux/socket.h>
++#include <linux/netdevice.h>
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
++#ifdef CONFIG_SENSORS_EEPROM
++# include <linux/i2c.h>
++# include <linux/eeprom.h>
++#endif
++
+ #include <linux/i2c-gpio.h>
+ 
+ #include <asm/types.h>
+@@ -194,9 +202,48 @@
+     t->hdr.size = 0;
+ }
+ 
++#ifdef CONFIG_SENSORS_EEPROM
++static int loft_eeprom_do(struct notifier_block *self, unsigned long event, void *t)
++{
++       struct eeprom_data *data = t;
++       struct sockaddr address;
++       struct net_device * netdev ;
++
++       char macs[12];
++
++       /* The MACs are the first 12 bytes in the eeprom at address 0x51 */
++       if (event == EEPROM_REGISTER && data->client.addr == 0x51) {
++               data->attr->read(&data->client.dev.kobj, data->attr, macs, 0, 12);
++		/*eth0*/
++		/* using dev_get_by_name here is really ugly and can cause
++ 		* confusion if other ethernet devices are present. FIXME */
++		
++		memcpy(address.sa_data, macs, ETH_ALEN);
++               	memcpy(&avila_plat_eth[0].hwaddr, macs, ETH_ALEN);
++		if ( (netdev = dev_get_by_name(&init_net, "eth0")) )
++			netdev->set_mac_address(netdev, &address);
++
++                /*same for eth1*/
++	 	memcpy(address.sa_data, macs + ETH_ALEN, ETH_ALEN);
++	       memcpy(&avila_plat_eth[1].hwaddr, macs + ETH_ALEN, ETH_ALEN);
++		if ( (netdev = dev_get_by_name(&init_net, "eth1")) )
++			netdev->set_mac_address(netdev, &address);
++       }
++
++       return NOTIFY_DONE;
++}
++
++static struct notifier_block loft_eeprom_notifier = {
++       .notifier_call = loft_eeprom_do
++};
++#endif
++
+ static void __init avila_init(void)
+ {
+ 	ixp4xx_sys_init();
++#ifdef CONFIG_SENSORS_EEPROM
++       register_eeprom_notifier(&loft_eeprom_notifier);
++#endif
+ 
+ 	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ 	avila_flash_resource.end =
+
diff --git a/target/linux/ixp4xx/patches-2.6.24/301-avila_led.patch b/target/linux/ixp4xx/patches-2.6.24/301-avila_led.patch
new file mode 100644
index 000000000..b82ed7df5
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/301-avila_led.patch
@@ -0,0 +1,50 @@
+Index: linux-2.6.23.14/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.23.14.orig/arch/arm/mach-ixp4xx/avila-setup.c	2008-01-25 18:26:06.000000000 +0100
++++ linux-2.6.23.14/arch/arm/mach-ixp4xx/avila-setup.c	2008-01-25 18:44:02.000000000 +0100
+@@ -165,12 +165,34 @@
+ 	}
+ };
+ 
++#ifdef CONFIG_LEDS_IXP4XX
++static struct resource avila_led_resources[] = {
++	{
++		.name		= "user",
++		.start		= AVILA_LED_USER_GPIO,
++		.end		= AVILA_LED_USER_GPIO,
++		.flags		= IXP4XX_GPIO_LOW,
++	},
++};
++
++static struct platform_device avila_leds = {
++	.name				= "IXP4XX-GPIO-LED",
++	.id					= -1,
++	.num_resources		= ARRAY_SIZE(avila_led_resources),
++	.resource			= avila_led_resources,
++};
++#endif
++
++
+ static struct platform_device *avila_devices[] __initdata = {
+ 	&avila_i2c_gpio,
+ 	&avila_flash,
+ 	&avila_uart,
+ 	&avila_eth[0],
+ 	&avila_eth[1],
++#ifdef CONFIG_LEDS_IXP4XX
++	&avila_leds,
++#endif
+ };
+ 
+ static char avila_rtc_probe[] __initdata = "rtc-ds1672.probe=0,0x68 ";
+Index: linux-2.6.23.14/include/asm-arm/arch-ixp4xx/avila.h
+===================================================================
+--- linux-2.6.23.14.orig/include/asm-arm/arch-ixp4xx/avila.h	2008-01-25 18:26:02.000000000 +0100
++++ linux-2.6.23.14/include/asm-arm/arch-ixp4xx/avila.h	2008-01-25 18:26:06.000000000 +0100
+@@ -36,4 +36,5 @@
+ #define AVILA_PCI_INTC_PIN	9
+ #define AVILA_PCI_INTD_PIN	8
+ 
+-
++/* User LED */
++#define AVILA_LED_USER_GPIO	3
diff --git a/target/linux/ixp4xx/patches-2.6.24/302-gpio_device.patch b/target/linux/ixp4xx/patches-2.6.24/302-gpio_device.patch
new file mode 100644
index 000000000..0a1831b4f
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/302-gpio_device.patch
@@ -0,0 +1,49 @@
+Index: linux-2.6.23.14/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.23.14.orig/arch/arm/mach-ixp4xx/avila-setup.c	2008-01-26 02:59:30.000000000 +0100
++++ linux-2.6.23.14/arch/arm/mach-ixp4xx/avila-setup.c	2008-01-26 03:03:07.000000000 +0100
+@@ -183,6 +183,23 @@
+ };
+ #endif
+ 
++#ifdef CONFIG_GPIO_DEVICE
++static struct resource avila_gpio_resources[] = {
++	{
++		.name	= "gpio",
++		.start	= AVILA_GPIO_MASK,
++		.end	= AVILA_GPIO_MASK,
++		.flags	= 0,
++	},
++};
++
++static struct platform_device avila_gpio = {
++	.name				= "GPIODEV",
++	.id					= -1,
++	.num_resources		= ARRAY_SIZE(avila_gpio_resources),
++	.resource			= avila_gpio_resources,
++};
++#endif
+ 
+ static struct platform_device *avila_devices[] __initdata = {
+ 	&avila_i2c_gpio,
+@@ -193,6 +210,9 @@
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&avila_leds,
+ #endif
++#ifdef CONFIG_GPIO_DEVICE
++	&avila_gpio,
++#endif
+ };
+ 
+ static char avila_rtc_probe[] __initdata = "rtc-ds1672.probe=0,0x68 ";
+Index: linux-2.6.23.14/include/asm-arm/arch-ixp4xx/avila.h
+===================================================================
+--- linux-2.6.23.14.orig/include/asm-arm/arch-ixp4xx/avila.h	2008-01-26 03:03:27.000000000 +0100
++++ linux-2.6.23.14/include/asm-arm/arch-ixp4xx/avila.h	2008-01-26 03:07:02.000000000 +0100
+@@ -38,3 +38,6 @@
+ 
+ /* User LED */
+ #define AVILA_LED_USER_GPIO	3
++
++/* gpio mask used by platform device */
++#define AVILA_GPIO_MASK		(1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
diff --git a/target/linux/ixp4xx/patches-2.6.24/400-dmabounce.patch b/target/linux/ixp4xx/patches-2.6.24/400-dmabounce.patch
new file mode 100644
index 000000000..f4910261e
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/400-dmabounce.patch
@@ -0,0 +1,31 @@
+Index: linux-2.6.23.14/arch/arm/common/dmabounce.c
+===================================================================
+--- linux-2.6.23.14.orig/arch/arm/common/dmabounce.c	2008-01-24 22:03:28.475500801 +0100
++++ linux-2.6.23.14/arch/arm/common/dmabounce.c	2008-01-24 22:17:36.415822168 +0100
+@@ -116,6 +116,10 @@
+ 	} else if (size <= device_info->large.size) {
+ 		pool = &device_info->large;
+ 	} else {
++#ifdef CONFIG_DMABOUNCE_DEBUG
++		printk(KERN_INFO "A dma bounce buffer outside the pool size was requested. Requested size was 0x%08X\nThe calling code was :\n", size);
++		dump_stack();
++#endif
+ 		pool = NULL;
+ 	}
+ 
+Index: linux-2.6.23.14/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.23.14.orig/arch/arm/mach-ixp4xx/Kconfig	2008-01-24 22:10:29.331484012 +0100
++++ linux-2.6.23.14/arch/arm/mach-ixp4xx/Kconfig	2008-01-24 22:11:42.891675973 +0100
+@@ -220,6 +220,11 @@
+ 	default y
+ 	depends on PCI
+ 
++config DMABOUNCE_DEBUG
++	bool "Enable DMABounce debuging"
++	default n
++	depends on DMABOUNCE
++
+ config IXP4XX_INDIRECT_PCI
+ 	bool "Use indirect PCI memory access"
+ 	depends on PCI
diff --git a/target/linux/ixp4xx/patches-2.6.24/401-avila_pci_dev.patch b/target/linux/ixp4xx/patches-2.6.24/401-avila_pci_dev.patch
new file mode 100644
index 000000000..db76d15da
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/401-avila_pci_dev.patch
@@ -0,0 +1,13 @@
+Index: linux-2.6.23.14/include/asm-arm/arch-ixp4xx/avila.h
+===================================================================
+--- linux-2.6.23.14.orig/include/asm-arm/arch-ixp4xx/avila.h	2008-01-31 17:40:36.000000000 +0100
++++ linux-2.6.23.14/include/asm-arm/arch-ixp4xx/avila.h	2008-01-31 17:40:42.000000000 +0100
+@@ -25,7 +25,7 @@
+ /*
+  * AVILA PCI IRQs
+  */
+-#define AVILA_PCI_MAX_DEV	4
++#define AVILA_PCI_MAX_DEV	6
+ #define LOFT_PCI_MAX_DEV    6
+ #define AVILA_PCI_IRQ_LINES	4
+