summaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2007-05-24 08:17:03 +0000
committerkaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>2007-05-24 08:17:03 +0000
commit0e3776d9deb94616553d261f7053b811267476b6 (patch)
treebc926d89345a7e81b88ff5a5aa886bd5a211660c /target
parent1a0c6ae7d71c01ef7f2f7ca27b5f4a200eb274f3 (diff)
cleanup patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7326 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
-rw-r--r--target/linux/aruba-2.6/patches/000-aruba.patch8440
1 files changed, 0 insertions, 8440 deletions
diff --git a/target/linux/aruba-2.6/patches/000-aruba.patch b/target/linux/aruba-2.6/patches/000-aruba.patch
index 804bf2f22..206590e0b 100644
--- a/target/linux/aruba-2.6/patches/000-aruba.patch
+++ b/target/linux/aruba-2.6/patches/000-aruba.patch
@@ -57,96 +57,6 @@ diff -Nur linux-2.6.21.1/drivers/char/watchdog/Makefile linux-2.6.21.1-owrt/driv
+
# Architecture Independant
obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
-diff -Nur linux-2.6.21.1/drivers/char/watchdog/Makefile.orig linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile.orig
---- linux-2.6.21.1/drivers/char/watchdog/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile.orig 2007-04-27 23:49:26.000000000 +0200
-@@ -0,0 +1,86 @@
-+#
-+# Makefile for the WatchDog device drivers.
-+#
-+
-+# Only one watchdog can succeed. We probe the ISA/PCI/USB based
-+# watchdog-cards first, then the architecture specific watchdog
-+# drivers and then the architecture independant "softdog" driver.
-+# This means that if your ISA/PCI/USB card isn't detected that
-+# you can fall back to an architecture specific driver and if
-+# that also fails then you can fall back to the software watchdog
-+# to give you some cover.
-+
-+# ISA-based Watchdog Cards
-+obj-$(CONFIG_PCWATCHDOG) += pcwd.o
-+obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
-+obj-$(CONFIG_WDT) += wdt.o
-+
-+# PCI-based Watchdog Cards
-+obj-$(CONFIG_PCIPCWATCHDOG) += pcwd_pci.o
-+obj-$(CONFIG_WDTPCI) += wdt_pci.o
-+
-+# USB-based Watchdog Cards
-+obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
-+
-+# ARM Architecture
-+obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
-+obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
-+obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
-+obj-$(CONFIG_977_WATCHDOG) += wdt977.o
-+obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o
-+obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
-+obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
-+obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
-+obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
-+obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
-+obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
-+
-+# X86 (i386 + ia64 + x86_64) Architecture
-+obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
-+obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
-+obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
-+obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
-+obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
-+obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
-+obj-$(CONFIG_IB700_WDT) += ib700wdt.o
-+obj-$(CONFIG_IBMASR) += ibmasr.o
-+obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
-+obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
-+obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
-+obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
-+obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
-+obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
-+obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
-+obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
-+obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
-+obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
-+obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
-+obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
-+obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o
-+obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
-+obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
-+obj-$(CONFIG_MACHZ_WDT) += machzwd.o
-+obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
-+
-+# PowerPC Architecture
-+obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
-+obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o
-+obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
-+obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
-+
-+# PPC64 Architecture
-+obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
-+
-+# MIPS Architecture
-+obj-$(CONFIG_INDYDOG) += indydog.o
-+obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
-+
-+# S390 Architecture
-+
-+# SUPERH Architecture
-+obj-$(CONFIG_SH_WDT) += shwdt.o
-+
-+# SPARC64 Architecture
-+
-+# Architecture Independant
-+obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff -Nur linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c
--- linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c 2007-05-23 23:36:42.000000000 +0200
@@ -236,454 +146,6 @@ diff -Nur linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c linux-2.6.21.1-owrt/drive
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
-diff -Nur linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c.orig linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c.orig
---- linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c.orig 2007-04-27 23:49:26.000000000 +0200
-@@ -0,0 +1,444 @@
-+/*
-+ Common Flash Interface probe code.
-+ (C) 2000 Red Hat. GPL'd.
-+ $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <asm/io.h>
-+#include <asm/byteorder.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+
-+#include <linux/mtd/xip.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/cfi.h>
-+#include <linux/mtd/gen_probe.h>
-+
-+//#define DEBUG_CFI
-+
-+#ifdef DEBUG_CFI
-+static void print_cfi_ident(struct cfi_ident *);
-+#endif
-+
-+static int cfi_probe_chip(struct map_info *map, __u32 base,
-+ unsigned long *chip_map, struct cfi_private *cfi);
-+static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
-+
-+struct mtd_info *cfi_probe(struct map_info *map);
-+
-+#ifdef CONFIG_MTD_XIP
-+
-+/* only needed for short periods, so this is rather simple */
-+#define xip_disable() local_irq_disable()
-+
-+#define xip_allowed(base, map) \
-+do { \
-+ (void) map_read(map, base); \
-+ asm volatile (".rep 8; nop; .endr"); \
-+ local_irq_enable(); \
-+} while (0)
-+
-+#define xip_enable(base, map, cfi) \
-+do { \
-+ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
-+ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
-+ xip_allowed(base, map); \
-+} while (0)
-+
-+#define xip_disable_qry(base, map, cfi) \
-+do { \
-+ xip_disable(); \
-+ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
-+ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
-+ cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); \
-+} while (0)
-+
-+#else
-+
-+#define xip_disable() do { } while (0)
-+#define xip_allowed(base, map) do { } while (0)
-+#define xip_enable(base, map, cfi) do { } while (0)
-+#define xip_disable_qry(base, map, cfi) do { } while (0)
-+
-+#endif
-+
-+/* check for QRY.
-+ in: interleave,type,mode
-+ ret: table index, <0 for error
-+ */
-+static int __xipram qry_present(struct map_info *map, __u32 base,
-+ struct cfi_private *cfi)
-+{
-+ int osf = cfi->interleave * cfi->device_type; // scale factor
-+ map_word val[3];
-+ map_word qry[3];
-+
-+ qry[0] = cfi_build_cmd('Q', map, cfi);
-+ qry[1] = cfi_build_cmd('R', map, cfi);
-+ qry[2] = cfi_build_cmd('Y', map, cfi);
-+
-+ val[0] = map_read(map, base + osf*0x10);
-+ val[1] = map_read(map, base + osf*0x11);
-+ val[2] = map_read(map, base + osf*0x12);
-+
-+ if (!map_word_equal(map, qry[0], val[0]))
-+ return 0;
-+
-+ if (!map_word_equal(map, qry[1], val[1]))
-+ return 0;
-+
-+ if (!map_word_equal(map, qry[2], val[2]))
-+ return 0;
-+
-+ return 1; // "QRY" found
-+}
-+
-+static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
-+ unsigned long *chip_map, struct cfi_private *cfi)
-+{
-+ int i;
-+
-+ if ((base + 0) >= map->size) {
-+ printk(KERN_NOTICE
-+ "Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n",
-+ (unsigned long)base, map->size -1);
-+ return 0;
-+ }
-+ if ((base + 0xff) >= map->size) {
-+ printk(KERN_NOTICE
-+ "Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx)\n",
-+ (unsigned long)base + 0x55, map->size -1);
-+ return 0;
-+ }
-+
-+ xip_disable();
-+ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
-+
-+ if (!qry_present(map,base,cfi)) {
-+ xip_enable(base, map, cfi);
-+ return 0;
-+ }
-+
-+ if (!cfi->numchips) {
-+ /* This is the first time we're called. Set up the CFI
-+ stuff accordingly and return */
-+ return cfi_chip_setup(map, cfi);
-+ }
-+
-+ /* Check each previous chip to see if it's an alias */
-+ for (i=0; i < (base >> cfi->chipshift); i++) {
-+ unsigned long start;
-+ if(!test_bit(i, chip_map)) {
-+ /* Skip location; no valid chip at this address */
-+ continue;
-+ }
-+ start = i << cfi->chipshift;
-+ /* This chip should be in read mode if it's one
-+ we've already touched. */
-+ if (qry_present(map, start, cfi)) {
-+ /* Eep. This chip also had the QRY marker.
-+ * Is it an alias for the new one? */
-+ cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
-+
-+ /* If the QRY marker goes away, it's an alias */
-+ if (!qry_present(map, start, cfi)) {
-+ xip_allowed(base, map);
-+ printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
-+ map->name, base, start);
-+ return 0;
-+ }
-+ /* Yes, it's actually got QRY for data. Most
-+ * unfortunate. Stick the new chip in read mode
-+ * too and if it's the same, assume it's an alias. */
-+ /* FIXME: Use other modes to do a proper check */
-+ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
-+
-+ if (qry_present(map, base, cfi)) {
-+ xip_allowed(base, map);
-+ printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
-+ map->name, base, start);
-+ return 0;
-+ }
-+ }
-+ }
-+
-+ /* OK, if we got to here, then none of the previous chips appear to
-+ be aliases for the current one. */
-+ set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */
-+ cfi->numchips++;
-+
-+ /* Put it back into Read Mode */
-+ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
-+ xip_allowed(base, map);
-+
-+ printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
-+ map->name, cfi->interleave, cfi->device_type*8, base,
-+ map->bankwidth*8);
-+
-+ return 1;
-+}
-+
-+static int __xipram cfi_chip_setup(struct map_info *map,
-+ struct cfi_private *cfi)
-+{
-+ int ofs_factor = cfi->interleave*cfi->device_type;
-+ __u32 base = 0;
-+ int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor);
-+ int i;
-+
-+ xip_enable(base, map, cfi);
-+#ifdef DEBUG_CFI
-+ printk("Number of erase regions: %d\n", num_erase_regions);
-+#endif
-+ if (!num_erase_regions)
-+ return 0;
-+
-+ cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
-+ if (!cfi->cfiq) {
-+ printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
-+ return 0;
-+ }
-+
-+ memset(cfi->cfiq,0,sizeof(struct cfi_ident));
-+
-+ cfi->cfi_mode = CFI_MODE_CFI;
-+
-+ /* Read the CFI info structure */
-+ xip_disable_qry(base, map, cfi);
-+ for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++)
-+ ((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor);
-+
-+ /* Note we put the device back into Read Mode BEFORE going into Auto
-+ * Select Mode, as some devices support nesting of modes, others
-+ * don't. This way should always work.
-+ * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
-+ * so should be treated as nops or illegal (and so put the device
-+ * back into Read Mode, which is a nop in this case).
-+ */
-+ cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
-+ cfi->mfr = cfi_read_query16(map, base);
-+ cfi->id = cfi_read_query16(map, base + ofs_factor);
-+
-+ /* Put it back into Read Mode */
-+ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
-+ /* ... even if it's an Intel chip */
-+ cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
-+ xip_allowed(base, map);
-+
-+ /* Do any necessary byteswapping */
-+ cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID);
-+
-+ cfi->cfiq->P_ADR = le16_to_cpu(cfi->cfiq->P_ADR);
-+ cfi->cfiq->A_ID = le16_to_cpu(cfi->cfiq->A_ID);
-+ cfi->cfiq->A_ADR = le16_to_cpu(cfi->cfiq->A_ADR);
-+ cfi->cfiq->InterfaceDesc = le16_to_cpu(cfi->cfiq->InterfaceDesc);
-+ cfi->cfiq->MaxBufWriteSize = le16_to_cpu(cfi->cfiq->MaxBufWriteSize);
-+
-+#ifdef DEBUG_CFI
-+ /* Dump the information therein */
-+ print_cfi_ident(cfi->cfiq);
-+#endif
-+
-+ for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
-+ cfi->cfiq->EraseRegionInfo[i] = le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]);
-+
-+#ifdef DEBUG_CFI
-+ printk(" Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n",
-+ i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff,
-+ (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1);
-+#endif
-+ }
-+
-+ printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
-+ map->name, cfi->interleave, cfi->device_type*8, base,
-+ map->bankwidth*8);
-+
-+ return 1;
-+}
-+
-+#ifdef DEBUG_CFI
-+static char *vendorname(__u16 vendor)
-+{
-+ switch (vendor) {
-+ case P_ID_NONE:
-+ return "None";
-+
-+ case P_ID_INTEL_EXT:
-+ return "Intel/Sharp Extended";
-+
-+ case P_ID_AMD_STD:
-+ return "AMD/Fujitsu Standard";
-+
-+ case P_ID_INTEL_STD:
-+ return "Intel/Sharp Standard";
-+
-+ case P_ID_AMD_EXT:
-+ return "AMD/Fujitsu Extended";
-+
-+ case P_ID_WINBOND:
-+ return "Winbond Standard";
-+
-+ case P_ID_ST_ADV:
-+ return "ST Advanced";
-+
-+ case P_ID_MITSUBISHI_STD:
-+ return "Mitsubishi Standard";
-+
-+ case P_ID_MITSUBISHI_EXT:
-+ return "Mitsubishi Extended";
-+
-+ case P_ID_SST_PAGE:
-+ return "SST Page Write";
-+
-+ case P_ID_INTEL_PERFORMANCE:
-+ return "Intel Performance Code";
-+
-+ case P_ID_INTEL_DATA:
-+ return "Intel Data";
-+
-+ case P_ID_RESERVED:
-+ return "Not Allowed / Reserved for Future Use";
-+
-+ default:
-+ return "Unknown";
-+ }
-+}
-+
-+
-+static void print_cfi_ident(struct cfi_ident *cfip)
-+{
-+#if 0
-+ if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') {
-+ printk("Invalid CFI ident structure.\n");
-+ return;
-+ }
-+#endif
-+ printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID));
-+ if (cfip->P_ADR)
-+ printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR);
-+ else
-+ printk("No Primary Algorithm Table\n");
-+
-+ printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID));
-+ if (cfip->A_ADR)
-+ printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR);
-+ else
-+ printk("No Alternate Algorithm Table\n");
-+
-+
-+ printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);
-+ printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);
-+ if (cfip->VppMin) {
-+ printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);
-+ printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);
-+ }
-+ else
-+ printk("No Vpp line\n");
-+
-+ printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp);
-+ printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));
-+
-+ if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) {
-+ printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp);
-+ printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));
-+ }
-+ else
-+ printk("Full buffer write not supported\n");
-+
-+ printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp);
-+ printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp));
-+ if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) {
-+ printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp);
-+ printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp));
-+ }
-+ else
-+ printk("Chip erase not supported\n");
-+
-+ printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20));
-+ printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc);
-+ switch(cfip->InterfaceDesc) {
-+ case 0:
-+ printk(" - x8-only asynchronous interface\n");
-+ break;
-+
-+ case 1:
-+ printk(" - x16-only asynchronous interface\n");
-+ break;
-+
-+ case 2:
-+ printk(" - supports x8 and x16 via BYTE# with asynchronous interface\n");
-+ break;
-+
-+ case 3:
-+ printk(" - x32-only asynchronous interface\n");
-+ break;
-+
-+ case 4:
-+ printk(" - supports x16 and x32 via Word# with asynchronous interface\n");
-+ break;
-+
-+ case 65535:
-+ printk(" - Not Allowed / Reserved\n");
-+ break;
-+
-+ default:
-+ printk(" - Unknown\n");
-+ break;
-+ }
-+
-+ printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize);
-+ printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions);
-+
-+}
-+#endif /* DEBUG_CFI */
-+
-+static struct chip_probe cfi_chip_probe = {
-+ .name = "CFI",
-+ .probe_chip = cfi_probe_chip
-+};
-+
-+struct mtd_info *cfi_probe(struct map_info *map)
-+{
-+ /*
-+ * Just use the generic probe stuff to call our CFI-specific
-+ * chip_probe routine in all the possible permutations, etc.
-+ */
-+ return mtd_do_chip_probe(map, &cfi_chip_probe);
-+}
-+
-+static struct mtd_chip_driver cfi_chipdrv = {
-+ .probe = cfi_probe,
-+ .name = "cfi_probe",
-+ .module = THIS_MODULE
-+};
-+
-+static int __init cfi_probe_init(void)
-+{
-+ register_mtd_chip_driver(&cfi_chipdrv);
-+ return 0;
-+}
-+
-+static void __exit cfi_probe_exit(void)
-+{
-+ unregister_mtd_chip_driver(&cfi_chipdrv);
-+}
-+
-+module_init(cfi_probe_init);
-+module_exit(cfi_probe_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
-+MODULE_DESCRIPTION("Probe code for CFI-compliant flash chips");
diff -Nur linux-2.6.21.1/drivers/net/Kconfig linux-2.6.21.1-owrt/drivers/net/Kconfig
--- linux-2.6.21.1/drivers/net/Kconfig 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/net/Kconfig 2007-05-23 23:37:01.000000000 +0200
@@ -707,2962 +169,6 @@ diff -Nur linux-2.6.21.1/drivers/net/Kconfig linux-2.6.21.1-owrt/drivers/net/Kco
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on NET_ETHERNET && PPC_PMAC && PPC32
-diff -Nur linux-2.6.21.1/drivers/net/Kconfig.orig linux-2.6.21.1-owrt/drivers/net/Kconfig.orig
---- linux-2.6.21.1/drivers/net/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1-owrt/drivers/net/Kconfig.orig 2007-05-23 23:34:01.000000000 +0200
-@@ -0,0 +1,2952 @@
-+
-+#
-+# Network device configuration
-+#
-+
-+menu "Network device support"
-+ depends on NET
-+
-+config NETDEVICES
-+ default y if UML
-+ bool "Network device support"
-+ ---help---
-+ You can say N here if you don't intend to connect your Linux box to
-+ any other computer at all.
-+
-+ You'll have to say Y if your computer contains a network card that
-+ you want to use under Linux. If you are going to run SLIP or PPP over
-+ telephone line or null modem cable you need say Y here. Connecting
-+ two machines with parallel ports using PLIP needs this, as well as
-+ AX.25/KISS for sending Internet traffic over amateur radio links.
-+
-+ See also "The Linux Network Administrator's Guide" by Olaf Kirch and
-+ Terry Dawson. Available at <http://www.tldp.org/guides.html>.
-+
-+ If unsure, say Y.
-+
-+# All the following symbols are dependent on NETDEVICES - do not repeat
-+# that for each of the symbols.
-+if NETDEVICES
-+
-+config IFB
-+ tristate "Intermediate Functional Block support"
-+ depends on NET_CLS_ACT
-+ ---help---
-+ This is an intermediate driver that allows sharing of
-+ resources.
-+ To compile this driver as a module, choose M here: the module
-+ will be called ifb. If you want to use more than one ifb
-+ device at a time, you need to compile this driver as a module.
-+ Instead of 'ifb', the devices will then be called 'ifb0',
-+ 'ifb1' etc.
-+ Look at the iproute2 documentation directory for usage etc
-+
-+config DUMMY
-+ tristate "Dummy net driver support"
-+ ---help---
-+ This is essentially a bit-bucket device (i.e. traffic you send to
-+ this device is consigned into oblivion) with a configurable IP
-+ address. It is most commonly used in order to make your currently
-+ inactive SLIP address seem like a real address for local programs.
-+ If you use SLIP or PPP, you might want to say Y here. Since this
-+ thing often comes in handy, the default is Y. It won't enlarge your
-+ kernel either. What a deal. Read about it in the Network
-+ Administrator's Guide, available from
-+ <http://www.tldp.org/docs.html#guide>.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called dummy. If you want to use more than one dummy
-+ device at a time, you need to compile this driver as a module.
-+ Instead of 'dummy', the devices will then be called 'dummy0',
-+ 'dummy1' etc.
-+
-+config BONDING
-+ tristate "Bonding driver support"
-+ depends on INET
-+ ---help---
-+ Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
-+ Channels together. This is called 'Etherchannel' by Cisco,
-+ 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
-+
-+ The driver supports multiple bonding modes to allow for both high
-+ performance and high availability operation.
-+
-+ Refer to <file:Documentation/networking/bonding.txt> for more
-+ information.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called bonding.
-+
-+config EQUALIZER
-+ tristate "EQL (serial line load balancing) support"
-+ ---help---
-+ If you have two serial connections to some other computer (this
-+ usually requires two modems and two telephone lines) and you use
-+ SLIP (the protocol for sending Internet traffic over telephone
-+ lines) or PPP (a better SLIP) on them, you can make them behave like
-+ one double speed connection using this driver. Naturally, this has
-+ to be supported at the other end as well, either with a similar EQL
-+ Linux driver or with a Livingston Portmaster 2e.
-+
-+ Say Y if you want this and read
-+ <file:Documentation/networking/eql.txt>. You may also want to read
-+ section 6.2 of the NET-3-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called eql. If unsure, say N.
-+
-+config TUN
-+ tristate "Universal TUN/TAP device driver support"
-+ select CRC32
-+ ---help---
-+ TUN/TAP provides packet reception and transmission for user space
-+ programs. It can be viewed as a simple Point-to-Point or Ethernet
-+ device, which instead of receiving packets from a physical media,
-+ receives them from user space program and instead of sending packets
-+ via physical media writes them to the user space program.
-+
-+ When a program opens /dev/net/tun, driver creates and registers
-+ corresponding net device tunX or tapX. After a program closed above
-+ devices, driver will automatically delete tunXX or tapXX device and
-+ all routes corresponding to it.
-+
-+ Please read <file:Documentation/networking/tuntap.txt> for more
-+ information.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called tun.
-+
-+ If you don't know what to use this for, you don't need it.
-+
-+config NET_SB1000
-+ tristate "General Instruments Surfboard 1000"
-+ depends on PNP
-+ ---help---
-+ This is a driver for the General Instrument (also known as
-+ NextLevel) SURFboard 1000 internal
-+ cable modem. This is an ISA card which is used by a number of cable
-+ TV companies to provide cable modem access. It's a one-way
-+ downstream-only cable modem, meaning that your upstream net link is
-+ provided by your regular phone modem.
-+
-+ At present this driver only compiles as a module, so say M here if
-+ you have this card. The module will be called sb1000. Then read
-+ <file:Documentation/networking/README.sb1000> for information on how
-+ to use this module, as it needs special ppp scripts for establishing
-+ a connection. Further documentation and the necessary scripts can be
-+ found at:
-+
-+ <http://www.jacksonville.net/~fventuri/>
-+ <http://home.adelphia.net/~siglercm/sb1000.html>
-+ <http://linuxpower.cx/~cable/>
-+
-+ If you don't have this card, of course say N.
-+
-+source "drivers/net/arcnet/Kconfig"
-+
-+source "drivers/net/phy/Kconfig"
-+
-+#
-+# Ethernet
-+#
-+
-+menu "Ethernet (10 or 100Mbit)"
-+ depends on !UML
-+
-+config NET_ETHERNET
-+ bool "Ethernet (10 or 100Mbit)"
-+ ---help---
-+ Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
-+ type of Local Area Network (LAN) in universities and companies.
-+
-+ Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
-+ coaxial cable, linking computers in a chain), 10BASE-T or twisted
-+ pair (10 Mbps over twisted pair cable, linking computers to central
-+ hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
-+ 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
-+ 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
-+ cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
-+ [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
-+ Ethernet (1 Gbps over optical fiber or short copper links).
-+
-+ If your Linux machine will be connected to an Ethernet and you have
-+ an Ethernet network interface card (NIC) installed in your computer,
-+ say Y here and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>. You will then also have
-+ to say Y to the driver for your particular NIC.
-+
-+ Note that the answer to this question won't directly affect the
-+ kernel: saying N will just cause the configurator to skip all
-+ the questions about Ethernet network cards. If unsure, say N.
-+
-+config MII
-+ tristate "Generic Media Independent Interface device support"
-+ depends on NET_ETHERNET
-+ help
-+ Most ethernet controllers have MII transceiver either as an external
-+ or internal device. It is safe to say Y or M here even if your
-+ ethernet card lack MII.
-+
-+config MACB
-+ tristate "Atmel MACB support"
-+ depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
-+ select MII
-+ help
-+ The Atmel MACB ethernet interface is found on many AT32 and AT91
-+ parts. Say Y to include support for the MACB chip.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called macb.
-+
-+source "drivers/net/arm/Kconfig"
-+
-+config IDT_RC32434_ETH
-+ tristate "IDT RC32434 Local Ethernet support"
-+ depends on NET_ETHERNET
-+ help
-+ IDT RC32434 has one local ethernet port. Say Y here to enable it.
-+ To compile this driver as a module, choose M here.
-+
-+config MACE
-+ tristate "MACE (Power Mac ethernet) support"
-+ depends on NET_ETHERNET && PPC_PMAC && PPC32
-+ select CRC32
-+ help
-+ Power Macintoshes and clones with Ethernet built-in on the
-+ motherboard will usually use a MACE (Medium Access Control for
-+ Ethernet) interface. Say Y to include support for the MACE chip.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called mace.
-+
-+config MACE_AAUI_PORT
-+ bool "Use AAUI port instead of TP by default"
-+ depends on MACE
-+ help
-+ Some Apple machines (notably the Apple Network Server) which use the
-+ MACE ethernet chip have an Apple AUI port (small 15-pin connector),
-+ instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
-+ Y here if you have such a machine. If unsure, say N.
-+ The driver will default to AAUI on ANS anyway, and if you use it as
-+ a module, you can provide the port_aaui=0|1 to force the driver.
-+
-+config BMAC
-+ tristate "BMAC (G3 ethernet) support"
-+ depends on NET_ETHERNET && PPC_PMAC && PPC32
-+ select CRC32
-+ help
-+ Say Y for support of BMAC Ethernet interfaces. These are used on G3
-+ computers.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called bmac.
-+
-+config ARIADNE
-+ tristate "Ariadne support"
-+ depends on NET_ETHERNET && ZORRO
-+ help
-+ If you have a Village Tronic Ariadne Ethernet adapter, say Y.
-+ Otherwise, say N.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called ariadne.
-+
-+config A2065
-+ tristate "A2065 support"
-+ depends on NET_ETHERNET && ZORRO
-+ select CRC32
-+ help
-+ If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
-+ say N.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called a2065.
-+
-+config HYDRA
-+ tristate "Hydra support"
-+ depends on NET_ETHERNET && ZORRO
-+ select CRC32
-+ help
-+ If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called hydra.
-+
-+config ZORRO8390
-+ tristate "Zorro NS8390-based Ethernet support"
-+ depends on NET_ETHERNET && ZORRO
-+ select CRC32
-+ help
-+ This driver is for Zorro Ethernet cards using an NS8390-compatible
-+ chipset, like the Village Tronic Ariadne II and the Individual
-+ Computers X-Surf Ethernet cards. If you have such a card, say Y.
-+ Otherwise, say N.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called zorro8390.
-+
-+config APNE
-+ tristate "PCMCIA NE2000 support"
-+ depends on NET_ETHERNET && AMIGA_PCMCIA
-+ select CRC32
-+ help
-+ If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
-+ say N.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called apne.
-+
-+config APOLLO_ELPLUS
-+ tristate "Apollo 3c505 support"
-+ depends on NET_ETHERNET && APOLLO
-+ help
-+ Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
-+ If you don't have one made for Apollos, you can use one from a PC,
-+ except that your Apollo won't be able to boot from it (because the
-+ code in the ROM will be for a PC).
-+
-+config MAC8390
-+ bool "Macintosh NS 8390 based ethernet cards"
-+ depends on NET_ETHERNET && MAC
-+ select CRC32
-+ help
-+ If you want to include a driver to support Nubus or LC-PDS
-+ Ethernet cards using an NS8390 chipset or its equivalent, say Y
-+ and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+config MAC89x0
-+ tristate "Macintosh CS89x0 based ethernet cards"
-+ depends on NET_ETHERNET && MAC && BROKEN
-+ ---help---
-+ Support for CS89x0 chipset based Ethernet cards. If you have a
-+ Nubus or LC-PDS network (Ethernet) card of this type, say Y and
-+ read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. This module will
-+ be called mac89x0.
-+
-+config MACSONIC
-+ tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
-+ depends on NET_ETHERNET && MAC
-+ ---help---
-+ Support for NatSemi SONIC based Ethernet devices. This includes
-+ the onboard Ethernet in many Quadras as well as some LC-PDS,
-+ a few Nubus and all known Comm Slot Ethernet cards. If you have
-+ one of these say Y and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. This module will
-+ be called macsonic.
-+
-+config MACMACE
-+ bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
-+ depends on NET_ETHERNET && MAC && EXPERIMENTAL
-+ select CRC32
-+ help
-+ Support for the onboard AMD 79C940 MACE Ethernet controller used in
-+ the 660AV and 840AV Macintosh. If you have one of these Macintoshes
-+ say Y and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+config MVME147_NET
-+ tristate "MVME147 (Lance) Ethernet support"
-+ depends on NET_ETHERNET && MVME147
-+ select CRC32
-+ help
-+ Support for the on-board Ethernet interface on the Motorola MVME147
-+ single-board computer. Say Y here to include the
-+ driver for this chip in your kernel.
-+ To compile this driver as a module, choose M here.
-+
-+config MVME16x_NET
-+ tristate "MVME16x Ethernet support"
-+ depends on NET_ETHERNET && MVME16x
-+ help
-+ This is the driver for the Ethernet interface on the Motorola
-+ MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
-+ driver for this chip in your kernel.
-+ To compile this driver as a module, choose M here.
-+
-+config BVME6000_NET
-+ tristate "BVME6000 Ethernet support"
-+ depends on NET_ETHERNET && BVME6000
-+ help
-+ This is the driver for the Ethernet interface on BVME4000 and
-+ BVME6000 VME boards. Say Y here to include the driver for this chip
-+ in your kernel.
-+ To compile this driver as a module, choose M here.
-+
-+config ATARILANCE
-+ tristate "Atari Lance support"
-+ depends on NET_ETHERNET && ATARI
-+ help
-+ Say Y to include support for several Atari Ethernet adapters based
-+ on the AMD Lance chipset: RieblCard (with or without battery), or
-+ PAMCard VME (also the version by Rhotron, with different addresses).
-+
-+config ATARI_BIONET
-+ tristate "BioNet-100 support"
-+ depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
-+ help
-+ Say Y to include support for BioData's BioNet-100 Ethernet adapter
-+ for the ACSI port. The driver works (has to work...) with a polled
-+ I/O scheme, so it's rather slow :-(
-+
-+config ATARI_PAMSNET
-+ tristate "PAMsNet support"
-+ depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
-+ help
-+ Say Y to include support for the PAMsNet Ethernet adapter for the
-+ ACSI port ("ACSI node"). The driver works (has to work...) with a
-+ polled I/O scheme, so it's rather slow :-(
-+
-+config SUN3LANCE
-+ tristate "Sun3/Sun3x on-board LANCE support"
-+ depends on NET_ETHERNET && (SUN3 || SUN3X)
-+ help
-+ Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
-+ featured an AMD Lance 10Mbit Ethernet controller on board; say Y
-+ here to compile in the Linux driver for this and enable Ethernet.
-+ General Linux information on the Sun 3 and 3x series (now
-+ discontinued) is at
-+ <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-+
-+ If you're not building a kernel for a Sun 3, say N.
-+
-+config SUN3_82586
-+ bool "Sun3 on-board Intel 82586 support"
-+ depends on NET_ETHERNET && SUN3
-+ help
-+ This driver enables support for the on-board Intel 82586 based
-+ Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
-+ that this driver does not support 82586-based adapters on additional
-+ VME boards.
-+
-+config HPLANCE
-+ bool "HP on-board LANCE support"
-+ depends on NET_ETHERNET && DIO
-+ select CRC32
-+ help
-+ If you want to use the builtin "LANCE" Ethernet controller on an
-+ HP300 machine, say Y here.
-+
-+config LASI_82596
-+ tristate "Lasi ethernet"
-+ depends on NET_ETHERNET && GSC
-+ help
-+ Say Y here to support the builtin Intel 82596 ethernet controller
-+ found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
-+
-+config MIPS_JAZZ_SONIC
-+ tristate "MIPS JAZZ onboard SONIC Ethernet support"
-+ depends on NET_ETHERNET && MACH_JAZZ
-+ help
-+ This is the driver for the onboard card of MIPS Magnum 4000,
-+ Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
-+
-+config MIPS_AU1X00_ENET
-+ bool "MIPS AU1000 Ethernet support"
-+ depends on NET_ETHERNET && SOC_AU1X00
-+ select PHYLIB
-+ select CRC32
-+ help
-+ If you have an Alchemy Semi AU1X00 based system
-+ say Y. Otherwise, say N.
-+
-+config NET_SB1250_MAC
-+ tristate "SB1250 Ethernet support"
-+ depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
-+
-+config SGI_IOC3_ETH
-+ bool "SGI IOC3 Ethernet"
-+ depends on NET_ETHERNET && PCI && SGI_IP27
-+ select CRC32
-+ select MII
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+config SGI_IOC3_ETH_HW_RX_CSUM
-+ bool "Receive hardware checksums"
-+ depends on SGI_IOC3_ETH && INET
-+ default y
-+ help
-+ The SGI IOC3 network adapter supports TCP and UDP checksums in
-+ hardware to offload processing of these checksums from the CPU. At
-+ the moment only acceleration of IPv4 is supported. This option
-+ enables offloading for checksums on receive. If unsure, say Y.
-+
-+config SGI_IOC3_ETH_HW_TX_CSUM
-+ bool "Transmit hardware checksums"
-+ depends on SGI_IOC3_ETH && INET
-+ default y
-+ help
-+ The SGI IOC3 network adapter supports TCP and UDP checksums in
-+ hardware to offload processing of these checksums from the CPU. At
-+ the moment only acceleration of IPv4 is supported. This option
-+ enables offloading for checksums on transmit. If unsure, say Y.
-+
-+config MIPS_SIM_NET
-+ tristate "MIPS simulator Network device (EXPERIMENTAL)"
-+ depends on MIPS_SIM && EXPERIMENTAL
-+ help
-+ The MIPSNET device is a simple Ethernet network device which is
-+ emulated by the MIPS Simulator.
-+ If you are not using a MIPSsim or are unsure, say N.
-+
-+config SGI_O2MACE_ETH
-+ tristate "SGI O2 MACE Fast Ethernet support"
-+ depends on NET_ETHERNET && SGI_IP32=y
-+
-+config STNIC
-+ tristate "National DP83902AV support"
-+ depends on NET_ETHERNET && SUPERH
-+ select CRC32
-+ help
-+ Support for cards based on the National Semiconductor DP83902AV
-+ ST-NIC Serial Network Interface Controller for Twisted Pair. This
-+ is a 10Mbit/sec Ethernet controller. Product overview and specs at
-+ <http://www.national.com/pf/DP/DP83902A.html>.
-+
-+ If unsure, say N.
-+
-+config SUNLANCE
-+ tristate "Sun LANCE support"
-+ depends on NET_ETHERNET && SBUS
-+ select CRC32
-+ help
-+ This driver supports the "le" interface present on all 32-bit Sparc
-+ systems, on some older Ultra systems and as an Sbus option. These
-+ cards are based on the AMD Lance chipset, which is better known
-+ via the NE2100 cards.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called sunlance.
-+
-+config HAPPYMEAL
-+ tristate "Sun Happy Meal 10/100baseT support"
-+ depends on NET_ETHERNET && (SBUS || PCI)
-+ select CRC32
-+ help
-+ This driver supports the "hme" interface present on most Ultra
-+ systems and as an option on older Sbus systems. This driver supports
-+ both PCI and Sbus devices. This driver also supports the "qfe" quad
-+ 100baseT device available in both PCI and Sbus configurations.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called sunhme.
-+
-+config SUNBMAC
-+ tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
-+ depends on NET_ETHERNET && SBUS && EXPERIMENTAL
-+ select CRC32
-+ help
-+ This driver supports the "be" interface available as an Sbus option.
-+ This is Sun's older 100baseT Ethernet device.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called sunbmac.
-+
-+config SUNQE
-+ tristate "Sun QuadEthernet support"
-+ depends on NET_ETHERNET && SBUS
-+ select CRC32
-+ help
-+ This driver supports the "qe" 10baseT Ethernet device, available as
-+ an Sbus option. Note that this is not the same as Quad FastEthernet
-+ "qfe" which is supported by the Happy Meal driver instead.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called sunqe.
-+
-+config SUNGEM
-+ tristate "Sun GEM support"
-+ depends on NET_ETHERNET && PCI
-+ select CRC32
-+ help
-+ Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
-+ <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
-+
-+config CASSINI
-+ tristate "Sun Cassini support"
-+ depends on NET_ETHERNET && PCI
-+ select CRC32
-+ help
-+ Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
-+ <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
-+
-+config NET_VENDOR_3COM
-+ bool "3COM cards"
-+ depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
-+ help
-+ If you have a network (Ethernet) card belonging to this class, say Y
-+ and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ Note that the answer to this question doesn't directly affect the
-+ kernel: saying N will just cause the configurator to skip all
-+ the questions about 3COM cards. If you say Y, you will be asked for
-+ your specific card in the following questions.
-+
-+config EL1
-+ tristate "3c501 \"EtherLink\" support"
-+ depends on NET_VENDOR_3COM && ISA
-+ ---help---
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>. Also, consider buying a
-+ new card, since the 3c501 is slow, broken, and obsolete: you will
-+ have problems. Some people suggest to ping ("man ping") a nearby
-+ machine every minute ("man cron") when using this card.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called 3c501.
-+
-+config EL2
-+ tristate "3c503 \"EtherLink II\" support"
-+ depends on NET_VENDOR_3COM && ISA
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called 3c503.
-+
-+config ELPLUS
-+ tristate "3c505 \"EtherLink Plus\" support"
-+ depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
-+ ---help---
-+ Information about this network (Ethernet) card can be found in
-+ <file:Documentation/networking/3c505.txt>. If you have a card of
-+ this type, say Y and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called 3c505.
-+
-+config EL16
-+ tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
-+ depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called 3c507.
-+
-+config EL3
-+ tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
-+ depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
-+ ---help---
-+ If you have a network (Ethernet) card belonging to the 3Com
-+ EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
-+ from <http://www.tldp.org/docs.html#howto>.
-+
-+ If your card is not working you may need to use the DOS
-+ setup disk to disable Plug & Play mode, and to select the default
-+ media type.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called 3c509.
-+
-+config 3C515
-+ tristate "3c515 ISA \"Fast EtherLink\""
-+ depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
-+ help
-+ If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
-+ network card, say Y and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called 3c515.
-+
-+config ELMC
-+ tristate "3c523 \"EtherLink/MC\" support"
-+ depends on NET_VENDOR_3COM && MCA_LEGACY
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called 3c523.
-+
-+config ELMC_II
-+ tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
-+ depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called 3c527.
-+
-+config VORTEX
-+ tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
-+ depends on NET_VENDOR_3COM && (PCI || EISA)
-+ select MII
-+ ---help---
-+ This option enables driver support for a large number of 10Mbps and
-+ 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
-+
-+ "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
-+ "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
-+ "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
-+ "Tornado" (3c905) PCI
-+ "Hurricane" (3c555/3cSOHO) PCI
-+
-+ If you have such a card, say Y and read the Ethernet-HOWTO,
-+ available from <http://www.tldp.org/docs.html#howto>. More
-+ specific information is in
-+ <file:Documentation/networking/vortex.txt> and in the comments at
-+ the beginning of <file:drivers/net/3c59x.c>.
-+
-+ To compile this support as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>.
-+
-+config TYPHOON
-+ tristate "3cr990 series \"Typhoon\" support"
-+ depends on NET_VENDOR_3COM && PCI
-+ select CRC32
-+ ---help---
-+ This option enables driver support for the 3cr990 series of cards:
-+
-+ 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
-+ 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
-+ 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
-+
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called typhoon.
-+
-+config LANCE
-+ tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
-+ depends on NET_ETHERNET && ISA && ISA_DMA_API
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
-+ of this type.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called lance. This is recommended.
-+
-+config NET_VENDOR_SMC
-+ bool "Western Digital/SMC cards"
-+ depends on NET_ETHERNET && (ISA || MCA || EISA || MAC)
-+ help
-+ If you have a network (Ethernet) card belonging to this class, say Y
-+ and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ Note that the answer to this question doesn't directly affect the
-+ kernel: saying N will just cause the configurator to skip all
-+ the questions about Western Digital cards. If you say Y, you will be
-+ asked for your specific card in the following questions.
-+
-+config WD80x3
-+ tristate "WD80*3 support"
-+ depends on NET_VENDOR_SMC && ISA
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called wd.
-+
-+config ULTRAMCA
-+ tristate "SMC Ultra MCA support"
-+ depends on NET_VENDOR_SMC && MCA
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type and are running
-+ an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
-+ available from <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called smc-mca.
-+
-+config ULTRA
-+ tristate "SMC Ultra support"
-+ depends on NET_VENDOR_SMC && ISA
-+ select CRC32
-+ ---help---
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ Important: There have been many reports that, with some motherboards
-+ mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
-+ such as some BusLogic models) causes corruption problems with many
-+ operating systems. The Linux smc-ultra driver has a work-around for
-+ this but keep it in mind if you have such a SCSI card and have
-+ problems.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called smc-ultra.
-+
-+config ULTRA32
-+ tristate "SMC Ultra32 EISA support"
-+ depends on NET_VENDOR_SMC && EISA
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called smc-ultra32.
-+
-+config SMC91X
-+ tristate "SMC 91C9x/91C1xxx support"
-+ select CRC32
-+ select MII
-+ depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00)
-+ help
-+ This is a driver for SMC's 91x series of Ethernet chipsets,
-+ including the SMC91C94 and the SMC91C111. Say Y if you want it
-+ compiled into the kernel, and read the file
-+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
-+ available from <http://www.linuxdoc.org/docs.html#howto>.
-+
-+ This driver is also available as a module ( = code which can be
-+ inserted in and removed from the running kernel whenever you want).
-+ The module will be called smc91x. If you want to compile it as a
-+ module, say M here and read <file:Documentation/modules.txt> as well
-+ as <file:Documentation/networking/net-modules.txt>.
-+
-+config SMC9194
-+ tristate "SMC 9194 support"
-+ depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
-+ select CRC32
-+ ---help---
-+ This is support for the SMC9xxx based Ethernet cards. Choose this
-+ option if you have a DELL laptop with the docking station, or
-+ another SMC9192/9194 based chipset. Say Y if you want it compiled
-+ into the kernel, and read the file
-+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
-+ available from <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called smc9194.
-+
-+config NET_NETX
-+ tristate "NetX Ethernet support"
-+ select MII
-+ depends on NET_ETHERNET && ARCH_NETX
-+ help
-+ This is support for the Hilscher netX builtin Ethernet ports
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called netx-eth.
-+
-+config DM9000
-+ tristate "DM9000 support"
-+ depends on (ARM || MIPS) && NET_ETHERNET
-+ select CRC32
-+ select MII
-+ ---help---
-+ Support for DM9000 chipset.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module will be
-+ called dm9000.
-+
-+config SMC911X
-+ tristate "SMSC LAN911[5678] support"
-+ select CRC32
-+ select MII
-+ depends on NET_ETHERNET && ARCH_PXA
-+ help
-+ This is a driver for SMSC's LAN911x series of Ethernet chipsets
-+ including the new LAN9115, LAN9116, LAN9117, and LAN9118.
-+ Say Y if you want it compiled into the kernel,
-+ and read the Ethernet-HOWTO, available from
-+ <http://www.linuxdoc.org/docs.html#howto>.
-+
-+ This driver is also available as a module. The module will be
-+ called smc911x. If you want to compile it as a module, say M
-+ here and read <file:Documentation/modules.txt>
-+
-+config NET_VENDOR_RACAL
-+ bool "Racal-Interlan (Micom) NI cards"
-+ depends on NET_ETHERNET && ISA
-+ help
-+ If you have a network (Ethernet) card belonging to this class, such
-+ as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
-+ available from <http://www.tldp.org/docs.html#howto>.
-+
-+ Note that the answer to this question doesn't directly affect the
-+ kernel: saying N will just cause the configurator to skip all
-+ the questions about NI cards. If you say Y, you will be asked for
-+ your specific card in the following questions.
-+
-+config NI5010
-+ tristate "NI5010 support (EXPERIMENTAL)"
-+ depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
-+ ---help---
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>. Note that this is still
-+ experimental code.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called ni5010.
-+
-+config NI52
-+ tristate "NI5210 support"
-+ depends on NET_VENDOR_RACAL && ISA
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called ni52.
-+
-+config NI65
-+ tristate "NI6510 support"
-+ depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called ni65.
-+
-+source "drivers/net/tulip/Kconfig"
-+
-+config AT1700
-+ tristate "AT1700/1720 support (EXPERIMENTAL)"
-+ depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL
-+ select CRC32
-+ ---help---
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called at1700.
-+
-+config DEPCA
-+ tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
-+ depends on NET_ETHERNET && (ISA || EISA || MCA)
-+ select CRC32
-+ ---help---
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto> as well as
-+ <file:drivers/net/depca.c>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called depca.
-+
-+config HP100
-+ tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
-+ depends on NET_ETHERNET && (ISA || EISA || PCI)
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called hp100.
-+
-+config NET_ISA
-+ bool "Other ISA cards"
-+ depends on NET_ETHERNET && ISA
-+ ---help---
-+ If your network (Ethernet) card hasn't been mentioned yet and its
-+ bus system (that's the way the cards talks to the other components
-+ of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
-+ Make sure you know the name of your card. Read the Ethernet-HOWTO,
-+ available from <http://www.tldp.org/docs.html#howto>.
-+
-+ If unsure, say Y.
-+
-+ Note that the answer to this question doesn't directly affect the
-+ kernel: saying N will just cause the configurator to skip all
-+ the remaining ISA network card questions. If you say Y, you will be
-+ asked for your specific card in the following questions.
-+
-+config E2100
-+ tristate "Cabletron E21xx support"
-+ depends on NET_ISA
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called e2100.
-+
-+config EWRK3
-+ tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
-+ depends on NET_ISA
-+ select CRC32
-+ ---help---
-+ This driver supports the DE203, DE204 and DE205 network (Ethernet)
-+ cards. If this is for you, say Y and read
-+ <file:Documentation/networking/ewrk3.txt> in the kernel source as
-+ well as the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called ewrk3.
-+
-+config EEXPRESS
-+ tristate "EtherExpress 16 support"
-+ depends on NET_ISA
-+ ---help---
-+ If you have an EtherExpress16 network (Ethernet) card, say Y and
-+ read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>. Note that the Intel
-+ EtherExpress16 card used to be regarded as a very poor choice
-+ because the driver was very unreliable. We now have a new driver
-+ that should do better.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called eexpress.
-+
-+config EEXPRESS_PRO
-+ tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
-+ depends on NET_ISA
-+ ---help---
-+ If you have a network (Ethernet) card of this type, say Y. This
-+ driver supports Intel i82595{FX,TX} based boards. Note however
-+ that the EtherExpress PRO/100 Ethernet card has its own separate
-+ driver. Please read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called eepro.
-+
-+config HPLAN_PLUS
-+ tristate "HP PCLAN+ (27247B and 27252A) support"
-+ depends on NET_ISA
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called hp-plus.
-+
-+config HPLAN
-+ tristate "HP PCLAN (27245 and other 27xxx series) support"
-+ depends on NET_ISA
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called hp.
-+
-+config LP486E
-+ tristate "LP486E on board Ethernet"
-+ depends on NET_ISA
-+ help
-+ Say Y here to support the 82596-based on-board Ethernet controller
-+ for the Panther motherboard, which is one of the two shipped in the
-+ Intel Professional Workstation.
-+
-+config ETH16I
-+ tristate "ICL EtherTeam 16i/32 support"
-+ depends on NET_ISA
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called eth16i.
-+
-+config NE2000
-+ tristate "NE2000/NE1000 support"
-+ depends on NET_ISA || (Q40 && m) || M32R
-+ select CRC32
-+ ---help---
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
-+ without a specific driver are compatible with NE2000.
-+
-+ If you have a PCI NE2000 card however, say N here and Y to "PCI
-+ NE2000 and clone support" under "EISA, VLB, PCI and on board
-+ controllers" below. If you have a NE2000 card and are running on
-+ an MCA system (a bus system used on some IBM PS/2 computers and
-+ laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
-+ below.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called ne.
-+
-+config ZNET
-+ tristate "Zenith Z-Note support (EXPERIMENTAL)"
-+ depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
-+ help
-+ The Zenith Z-Note notebook computer has a built-in network
-+ (Ethernet) card, and this is the Linux driver for it. Note that the
-+ IBM Thinkpad 300 is compatible with the Z-Note and is also supported
-+ by this driver. Read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+config SEEQ8005
-+ tristate "SEEQ8005 support (EXPERIMENTAL)"
-+ depends on NET_ISA && EXPERIMENTAL
-+ help
-+ This is a driver for the SEEQ 8005 network (Ethernet) card. If this
-+ is for you, read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called seeq8005.
-+
-+config NE2_MCA
-+ tristate "NE/2 (ne2000 MCA version) support"
-+ depends on NET_ETHERNET && MCA_LEGACY
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called ne2.
-+
-+config IBMLANA
-+ tristate "IBM LAN Adapter/A support"
-+ depends on NET_ETHERNET && MCA && MCA_LEGACY
-+ ---help---
-+ This is a Micro Channel Ethernet adapter. You need to set
-+ CONFIG_MCA to use this driver. It is both available as an in-kernel
-+ driver and as a module.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The only
-+ currently supported card is the IBM LAN Adapter/A for Ethernet. It
-+ will both support 16K and 32K memory windows, however a 32K window
-+ gives a better security against packet losses. Usage of multiple
-+ boards with this driver should be possible, but has not been tested
-+ up to now due to lack of hardware.
-+
-+config IBMVETH
-+ tristate "IBM LAN Virtual Ethernet support"
-+ depends on NET_ETHERNET && PPC_PSERIES
-+ ---help---
-+ This driver supports virtual ethernet adapters on newer IBM iSeries
-+ and pSeries systems.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module will
-+ be called ibmveth.
-+
-+config IBM_EMAC
-+ tristate "PowerPC 4xx on-chip Ethernet support"
-+ depends on 4xx
-+ help
-+ This driver supports the PowerPC 4xx EMAC family of on-chip
-+ Ethernet controllers.
-+
-+config IBM_EMAC_RXB
-+ int "Number of receive buffers"
-+ depends on IBM_EMAC
-+ default "128"
-+
-+config IBM_EMAC_TXB
-+ int "Number of transmit buffers"
-+ depends on IBM_EMAC
-+ default "64"
-+
-+config IBM_EMAC_POLL_WEIGHT
-+ int "MAL NAPI polling weight"
-+ depends on IBM_EMAC
-+ default "32"
-+
-+config IBM_EMAC_RX_COPY_THRESHOLD
-+ int "RX skb copy threshold (bytes)"
-+ depends on IBM_EMAC
-+ default "256"
-+
-+config IBM_EMAC_RX_SKB_HEADROOM
-+ int "Additional RX skb headroom (bytes)"
-+ depends on IBM_EMAC
-+ default "0"
-+ help
-+ Additional receive skb headroom. Note, that driver
-+ will always reserve at least 2 bytes to make IP header
-+ aligned, so usually there is no need to add any additional
-+ headroom.
-+
-+ If unsure, set to 0.
-+
-+config IBM_EMAC_PHY_RX_CLK_FIX
-+ bool "PHY Rx clock workaround"
-+ depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
-+ help
-+ Enable this if EMAC attached to a PHY which doesn't generate
-+ RX clock if there is no link, if this is the case, you will
-+ see "TX disable timeout" or "RX disable timeout" in the system
-+ log.
-+
-+ If unsure, say N.
-+
-+config IBM_EMAC_DEBUG
-+ bool "Debugging"
-+ depends on IBM_EMAC
-+ default n
-+
-+config IBM_EMAC_ZMII
-+ bool
-+ depends on IBM_EMAC && (NP405H || NP405L || 44x)
-+ default y
-+
-+config IBM_EMAC_RGMII
-+ bool
-+ depends on IBM_EMAC && 440GX
-+ default y
-+
-+config IBM_EMAC_TAH
-+ bool
-+ depends on IBM_EMAC && 440GX
-+ default y
-+
-+config NET_PCI
-+ bool "EISA, VLB, PCI and on board controllers"
-+ depends on NET_ETHERNET && (ISA || EISA || PCI)
-+ help
-+ This is another class of network cards which attach directly to the
-+ bus. If you have one of those, say Y and read the Ethernet-HOWTO,
-+ available from <http://www.tldp.org/docs.html#howto>.
-+
-+ Note that the answer to this question doesn't directly affect the
-+ kernel: saying N will just cause the configurator to skip all
-+ the questions about this class of network cards. If you say Y, you
-+ will be asked for your specific card in the following questions. If
-+ you are unsure, say Y.
-+
-+config PCNET32
-+ tristate "AMD PCnet32 PCI support"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ select MII
-+ help
-+ If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
-+ answer Y here and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called pcnet32.
-+
-+config PCNET32_NAPI
-+ bool "Use RX polling (NAPI)"
-+ depends on PCNET32
-+ help
-+ NAPI is a new driver API designed to reduce CPU and interrupt load
-+ when the driver is receiving lots of packets from the card. It is
-+ still somewhat experimental and thus not yet enabled by default.
-+
-+ If your estimated Rx load is 10kpps or more, or if the card will be
-+ deployed on potentially unfriendly networks (e.g. in a firewall),
-+ then say Y here.
-+
-+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-+ information.
-+
-+ If in doubt, say N.
-+
-+config AMD8111_ETH
-+ tristate "AMD 8111 (new PCI lance) support"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ select MII
-+ help
-+ If you have an AMD 8111-based PCI lance ethernet card,
-+ answer Y here and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called amd8111e.
-+config AMD8111E_NAPI
-+ bool "Enable NAPI support"
-+ depends on AMD8111_ETH
-+ help
-+ NAPI is a new driver API designed to reduce CPU and interrupt load
-+ when the driver is receiving lots of packets from the card. It is
-+ still somewhat experimental and thus not yet enabled by default.
-+
-+ If your estimated Rx load is 10kpps or more, or if the card will be
-+ deployed on potentially unfriendly networks (e.g. in a firewall),
-+ then say Y here.
-+
-+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-+ information.
-+
-+ If in doubt, say N.
-+
-+config ADAPTEC_STARFIRE
-+ tristate "Adaptec Starfire/DuraLAN support"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ select MII
-+ help
-+ Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
-+ adapter. The DuraLAN chip is used on the 64 bit PCI boards from
-+ Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
-+ driver.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called starfire. This is recommended.
-+
-+config ADAPTEC_STARFIRE_NAPI
-+ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-+ depends on ADAPTEC_STARFIRE && EXPERIMENTAL
-+ help
-+ NAPI is a new driver API designed to reduce CPU and interrupt load
-+ when the driver is receiving lots of packets from the card. It is
-+ still somewhat experimental and thus not yet enabled by default.
-+
-+ If your estimated Rx load is 10kpps or more, or if the card will be
-+ deployed on potentially unfriendly networks (e.g. in a firewall),
-+ then say Y here.
-+
-+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-+ information.
-+
-+ If in doubt, say N.
-+
-+config AC3200
-+ tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
-+ depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called ac3200.
-+
-+config APRICOT
-+ tristate "Apricot Xen-II on board Ethernet"
-+ depends on NET_PCI && ISA
-+ help
-+ If you have a network (Ethernet) controller of this type, say Y and
-+ read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module will be
-+ called apricot.
-+
-+config B44
-+ tristate "Broadcom 4400 ethernet support"
-+ depends on NET_PCI && PCI
-+ select MII
-+ help
-+ If you have a network (Ethernet) controller of this type, say Y and
-+ read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module will be
-+ called b44.
-+
-+config FORCEDETH
-+ tristate "nForce Ethernet support"
-+ depends on NET_PCI && PCI
-+ help
-+ If you have a network (Ethernet) controller of this type, say Y and
-+ read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module will be
-+ called forcedeth.
-+
-+config FORCEDETH_NAPI
-+ bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
-+ depends on FORCEDETH && EXPERIMENTAL
-+ help
-+ NAPI is a new driver API designed to reduce CPU and interrupt load
-+ when the driver is receiving lots of packets from the card. It is
-+ still somewhat experimental and thus not yet enabled by default.
-+
-+ If your estimated Rx load is 10kpps or more, or if the card will be
-+ deployed on potentially unfriendly networks (e.g. in a firewall),
-+ then say Y here.
-+
-+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-+ information.
-+
-+ If in doubt, say N.
-+
-+config CS89x0
-+ tristate "CS89x0 support"
-+ depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X)
-+ ---help---
-+ Support for CS89x0 chipset based Ethernet cards. If you have a
-+ network (Ethernet) card of this type, say Y and read the
-+ Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto> as well as
-+ <file:Documentation/networking/cs89x0.txt>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module will be
-+ called cs89x0.
-+
-+config TC35815
-+ tristate "TOSHIBA TC35815 Ethernet support"
-+ depends on NET_PCI && PCI && TOSHIBA_JMR3927
-+
-+config DGRS
-+ tristate "Digi Intl. RightSwitch SE-X support"
-+ depends on NET_PCI && (PCI || EISA)
-+ ---help---
-+ This is support for the Digi International RightSwitch series of
-+ PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6
-+ models. If you have a network card of this type, say Y and read the
-+ Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>. More specific
-+ information is contained in <file:Documentation/networking/dgrs.txt>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called dgrs.
-+
-+config EEPRO100
-+ tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
-+ depends on NET_PCI && PCI
-+ select MII
-+ help
-+ If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
-+ card, say Y and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called eepro100.
-+
-+
-+config E100
-+ tristate "Intel(R) PRO/100+ support"
-+ depends on NET_PCI && PCI
-+ select MII
-+ ---help---
-+ This driver supports Intel(R) PRO/100 family of adapters.
-+ To verify that your adapter is supported, find the board ID number
-+ on the adapter. Look for a label that has a barcode and a number
-+ in the format 123456-001 (six digits hyphen three digits).
-+
-+ Use the above information and the Adapter & Driver ID Guide at:
-+
-+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-+
-+ to identify the adapter.
-+
-+ For the latest Intel PRO/100 network driver for Linux, see:
-+
-+ <http://appsr.intel.com/scripts-df/support_intel.asp>
-+
-+ More specific information on configuring the driver is in
-+ <file:Documentation/networking/e100.txt>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called e100.
-+
-+config LNE390
-+ tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
-+ depends on NET_PCI && EISA && EXPERIMENTAL
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called lne390.
-+
-+config FEALNX
-+ tristate "Myson MTD-8xx PCI Ethernet support"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ select MII
-+ help
-+ Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
-+ cards. Specifications and data at
-+ <http://www.myson.com.hk/mtd/datasheet/>.
-+
-+config NATSEMI
-+ tristate "National Semiconductor DP8381x series PCI Ethernet support"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ help
-+ This driver is for the National Semiconductor DP83810 series,
-+ which is used in cards from PureData, NetGear, Linksys
-+ and others, including the 83815 chip.
-+ More specific information and updates are available from
-+ <http://www.scyld.com/network/natsemi.html>.
-+
-+config NE2K_PCI
-+ tristate "PCI NE2000 and clones support (see help)"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ ---help---
-+ This driver is for NE2000 compatible PCI cards. It will not work
-+ with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
-+ support" below). If you have a PCI NE2000 network (Ethernet) card,
-+ say Y and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ This driver also works for the following NE2000 clone cards:
-+ RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
-+ NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
-+ Holtek HT80232 Holtek HT80229
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called ne2k-pci.
-+
-+config NE3210
-+ tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
-+ depends on NET_PCI && EISA && EXPERIMENTAL
-+ select CRC32
-+ ---help---
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>. Note that this driver
-+ will NOT WORK for NE3200 cards as they are completely different.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called ne3210.
-+
-+config ES3210
-+ tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
-+ depends on NET_PCI && EISA && EXPERIMENTAL
-+ select CRC32
-+ help
-+ If you have a network (Ethernet) card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called es3210.
-+
-+config 8139CP
-+ tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
-+ depends on NET_PCI && PCI && EXPERIMENTAL
-+ select CRC32
-+ select MII
-+ help
-+ This is a driver for the Fast Ethernet PCI network cards based on
-+ the RTL8139C+ chips. If you have one of those, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called 8139cp. This is recommended.
-+
-+config 8139TOO
-+ tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ select MII
-+ ---help---
-+ This is a driver for the Fast Ethernet PCI network cards based on
-+ the RTL 8129/8130/8139 chips. If you have one of those, say Y and
-+ read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called 8139too. This is recommended.
-+
-+config 8139TOO_PIO
-+ bool "Use PIO instead of MMIO"
-+ default y
-+ depends on 8139TOO
-+ help
-+ This instructs the driver to use programmed I/O ports (PIO) instead
-+ of PCI shared memory (MMIO). This can possibly solve some problems
-+ in case your mainboard has memory consistency issues. If unsure,
-+ say N.
-+
-+config 8139TOO_TUNE_TWISTER
-+ bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
-+ depends on 8139TOO
-+ help
-+ This implements a function which might come in handy in case you
-+ are using low quality on long cabling. It is required for RealTek
-+ RTL-8139 revision K boards, and totally unused otherwise. It tries
-+ to match the transceiver to the cable characteristics. This is
-+ experimental since hardly documented by the manufacturer.
-+ If unsure, say Y.
-+
-+config 8139TOO_8129
-+ bool "Support for older RTL-8129/8130 boards"
-+ depends on 8139TOO
-+ help
-+ This enables support for the older and uncommon RTL-8129 and
-+ RTL-8130 chips, which support MII via an external transceiver,
-+ instead of an internal one. Disabling this option will save some
-+ memory by making the code size smaller. If unsure, say Y.
-+
-+config 8139_OLD_RX_RESET
-+ bool "Use older RX-reset method"
-+ depends on 8139TOO
-+ help
-+ The 8139too driver was recently updated to contain a more rapid
-+ reset sequence, in the face of severe receive errors. This "new"
-+ RX-reset method should be adequate for all boards. But if you
-+ experience problems, you can enable this option to restore the
-+ old RX-reset behavior. If unsure, say N.
-+
-+config SIS900
-+ tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ select MII
-+ ---help---
-+ This is a driver for the Fast Ethernet PCI network cards based on
-+ the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
-+ SiS 630 and SiS 540 chipsets.
-+
-+ This driver also supports AMD 79C901 HomePNA so that you can use
-+ your phone line as a network cable.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called sis900. This is recommended.
-+
-+config EPIC100
-+ tristate "SMC EtherPower II"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ select MII
-+ help
-+ This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
-+ which is based on the SMC83c17x (EPIC/100).
-+ More specific information and updates are available from
-+ <http://www.scyld.com/network/epic100.html>.
-+
-+config SUNDANCE
-+ tristate "Sundance Alta support"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ select MII
-+ help
-+ This driver is for the Sundance "Alta" chip.
-+ More specific information and updates are available from
-+ <http://www.scyld.com/network/sundance.html>.
-+
-+config SUNDANCE_MMIO
-+ bool "Use MMIO instead of PIO"
-+ depends on SUNDANCE
-+ help
-+ Enable memory-mapped I/O for interaction with Sundance NIC registers.
-+ Do NOT enable this by default, PIO (enabled when MMIO is disabled)
-+ is known to solve bugs on certain chips.
-+
-+ If unsure, say N.
-+
-+config TLAN
-+ tristate "TI ThunderLAN support"
-+ depends on NET_PCI && (PCI || EISA) && !64BIT
-+ ---help---
-+ If you have a PCI Ethernet network card based on the ThunderLAN chip
-+ which is supported by this driver, say Y and read the
-+ Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ Devices currently supported by this driver are Compaq Netelligent,
-+ Compaq NetFlex and Olicom cards. Please read the file
-+ <file:Documentation/networking/tlan.txt> for more details.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called tlan.
-+
-+ Please email feedback to <torben.mathiasen@compaq.com>.
-+
-+config VIA_RHINE
-+ tristate "VIA Rhine support"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ select MII
-+ help
-+ If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
-+ Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
-+ Ethernet functions can also be found integrated on South Bridges
-+ (e.g. VT8235).
-+
-+ To compile this driver as a module, choose M here. The module
-+ will be called via-rhine.
-+
-+config VIA_RHINE_MMIO
-+ bool "Use MMIO instead of PIO"
-+ depends on VIA_RHINE
-+ help
-+ This instructs the driver to use PCI shared memory (MMIO) instead of
-+ programmed I/O ports (PIO). Enabling this gives an improvement in
-+ processing time in parts of the driver.
-+
-+ If unsure, say Y.
-+
-+config VIA_RHINE_NAPI
-+ bool "Use Rx Polling (NAPI)"
-+ depends on VIA_RHINE
-+ help
-+ NAPI is a new driver API designed to reduce CPU and interrupt load
-+ when the driver is receiving lots of packets from the card.
-+
-+ If your estimated Rx load is 10kpps or more, or if the card will be
-+ deployed on potentially unfriendly networks (e.g. in a firewall),
-+ then say Y here.
-+
-+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-+ information.
-+
-+config LAN_SAA9730
-+ bool "Philips SAA9730 Ethernet support"
-+ depends on NET_PCI && PCI && MIPS_ATLAS
-+ help
-+ The SAA9730 is a combined multimedia and peripheral controller used
-+ in thin clients, Internet access terminals, and diskless
-+ workstations.
-+ See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
-+
-+config SC92031
-+ tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
-+ depends on NET_PCI && PCI && EXPERIMENTAL
-+ select CRC32
-+ ---help---
-+ This is a driver for the Fast Ethernet PCI network cards based on
-+ the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
-+ have one of these, say Y here.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called sc92031. This is recommended.
-+
-+config NET_POCKET
-+ bool "Pocket and portable adapters"
-+ depends on NET_ETHERNET && PARPORT
-+ ---help---
-+ Cute little network (Ethernet) devices which attach to the parallel
-+ port ("pocket adapters"), commonly used with laptops. If you have
-+ one of those, say Y and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ If you want to plug a network (or some other) card into the PCMCIA
-+ (or PC-card) slot of your laptop instead (PCMCIA is the standard for
-+ credit card size extension cards used by all modern laptops), you
-+ need the pcmcia-cs package (location contained in the file
-+ <file:Documentation/Changes>) and you can say N here.
-+
-+ Laptop users should read the Linux Laptop home page at
-+ <http://www.linux-on-laptops.com/> or
-+ Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
-+
-+ Note that the answer to this question doesn't directly affect the
-+ kernel: saying N will just cause the configurator to skip all
-+ the questions about this class of network devices. If you say Y, you
-+ will be asked for your specific device in the following questions.
-+
-+config ATP
-+ tristate "AT-LAN-TEC/RealTek pocket adapter support"
-+ depends on NET_POCKET && PARPORT && X86
-+ select CRC32
-+ ---help---
-+ This is a network (Ethernet) device which attaches to your parallel
-+ port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
-+ available from <http://www.tldp.org/docs.html#howto>, if you
-+ want to use this. If you intend to use this driver, you should have
-+ said N to the "Parallel printer support", because the two drivers
-+ don't like each other.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called atp.
-+
-+config DE600
-+ tristate "D-Link DE600 pocket adapter support"
-+ depends on NET_POCKET && PARPORT
-+ ---help---
-+ This is a network (Ethernet) device which attaches to your parallel
-+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
-+ Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>, if you want to use
-+ this. It is possible to have several devices share a single parallel
-+ port and it is safe to compile the corresponding drivers into the
-+ kernel.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called de600.
-+
-+config DE620
-+ tristate "D-Link DE620 pocket adapter support"
-+ depends on NET_POCKET && PARPORT
-+ ---help---
-+ This is a network (Ethernet) device which attaches to your parallel
-+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
-+ Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>, if you want to use
-+ this. It is possible to have several devices share a single parallel
-+ port and it is safe to compile the corresponding drivers into the
-+ kernel.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called de620.
-+
-+config SGISEEQ
-+ tristate "SGI Seeq ethernet controller support"
-+ depends on NET_ETHERNET && SGI_IP22
-+ help
-+ Say Y here if you have an Seeq based Ethernet network card. This is
-+ used in many Silicon Graphics machines.
-+
-+config DECLANCE
-+ tristate "DEC LANCE ethernet controller support"
-+ depends on NET_ETHERNET && MACH_DECSTATION
-+ select CRC32
-+ help
-+ This driver is for the series of Ethernet controllers produced by
-+ DEC (now Compaq) based on the AMD Lance chipset, including the
-+ DEPCA series. (This chipset is better known via the NE2100 cards.)
-+
-+config 68360_ENET
-+ bool "Motorola 68360 ethernet controller"
-+ depends on M68360
-+ help
-+ Say Y here if you want to use the built-in ethernet controller of
-+ the Motorola 68360 processor.
-+
-+config FEC
-+ bool "FEC ethernet controller (of ColdFire CPUs)"
-+ depends on M523x || M527x || M5272 || M528x || M520x
-+ help
-+ Say Y here if you want to use the built-in 10/100 Fast ethernet
-+ controller on some Motorola ColdFire processors.
-+
-+config FEC2
-+ bool "Second FEC ethernet controller (on some ColdFire CPUs)"
-+ depends on FEC
-+ help
-+ Say Y here if you want to use the second built-in 10/100 Fast
-+ ethernet controller on some Motorola ColdFire processors.
-+
-+config NE_H8300
-+ tristate "NE2000 compatible support for H8/300"
-+ depends on H8300 && NET_ETHERNET
-+ help
-+ Say Y here if you want to use the NE2000 compatible
-+ controller on the Renesas H8/300 processor.
-+
-+source "drivers/net/fec_8xx/Kconfig"
-+source "drivers/net/fs_enet/Kconfig"
-+
-+endmenu
-+
-+#
-+# Gigabit Ethernet
-+#
-+
-+menu "Ethernet (1000 Mbit)"
-+ depends on !UML
-+
-+config ACENIC
-+ tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
-+ depends on PCI
-+ ---help---
-+ Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
-+ GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
-+ adapter. The driver allows for using the Jumbo Frame option (9000
-+ bytes/frame) however it requires that your switches can handle this
-+ as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
-+ line.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called acenic.
-+
-+config ACENIC_OMIT_TIGON_I
-+ bool "Omit support for old Tigon I based AceNICs"
-+ depends on ACENIC
-+ help
-+ Say Y here if you only have Tigon II based AceNICs and want to leave
-+ out support for the older Tigon I based cards which are no longer
-+ being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
-+ version)). This will reduce the size of the driver object by
-+ app. 100KB. If you are not sure whether your card is a Tigon I or a
-+ Tigon II, say N here.
-+
-+ The safe and default value for this is N.
-+
-+config DL2K
-+ tristate "D-Link DL2000-based Gigabit Ethernet support"
-+ depends on PCI
-+ select CRC32
-+ help
-+ This driver supports D-Link 2000-based gigabit ethernet cards, which
-+ includes
-+ D-Link DGE-550T Gigabit Ethernet Adapter.
-+ D-Link DL2000-based Gigabit Ethernet Adapter.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called dl2k.
-+
-+config E1000
-+ tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
-+ depends on PCI
-+ ---help---
-+ This driver supports Intel(R) PRO/1000 gigabit ethernet family of
-+ adapters. For more information on how to identify your adapter, go
-+ to the Adapter & Driver ID Guide at:
-+
-+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-+
-+ For general information and support, go to the Intel support
-+ website at:
-+
-+ <http://support.intel.com>
-+
-+ More specific information on configuring the driver is in
-+ <file:Documentation/networking/e1000.txt>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called e1000.
-+
-+config E1000_NAPI
-+ bool "Use Rx Polling (NAPI)"
-+ depends on E1000
-+ help
-+ NAPI is a new driver API designed to reduce CPU and interrupt load
-+ when the driver is receiving lots of packets from the card. It is
-+ still somewhat experimental and thus not yet enabled by default.
-+
-+ If your estimated Rx load is 10kpps or more, or if the card will be
-+ deployed on potentially unfriendly networks (e.g. in a firewall),
-+ then say Y here.
-+
-+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-+ information.
-+
-+ If in doubt, say N.
-+
-+config E1000_DISABLE_PACKET_SPLIT
-+ bool "Disable Packet Split for PCI express adapters"
-+ depends on E1000
-+ help
-+ Say Y here if you want to use the legacy receive path for PCI express
-+ hardware.
-+
-+ If in doubt, say N.
-+
-+source "drivers/net/ixp2000/Kconfig"
-+
-+config MYRI_SBUS
-+ tristate "MyriCOM Gigabit Ethernet support"
-+ depends on SBUS
-+ help
-+ This driver supports MyriCOM Sbus gigabit Ethernet cards.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called myri_sbus. This is recommended.
-+
-+config NS83820
-+ tristate "National Semiconductor DP83820 support"
-+ depends on PCI
-+ help
-+ This is a driver for the National Semiconductor DP83820 series
-+ of gigabit ethernet MACs. Cards using this chipset include
-+ the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
-+ SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
-+ zero copy.
-+
-+config HAMACHI
-+ tristate "Packet Engines Hamachi GNIC-II support"
-+ depends on PCI
-+ select MII
-+ help
-+ If you have a Gigabit Ethernet card of this type, say Y and read
-+ the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module will be
-+ called hamachi.
-+
-+config YELLOWFIN
-+ tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
-+ depends on PCI && EXPERIMENTAL
-+ select CRC32
-+ ---help---
-+ Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
-+ adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
-+ used by the Beowulf Linux cluster project. See
-+ <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
-+ information about this driver in particular and Beowulf in general.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called yellowfin. This is recommended.
-+
-+config R8169
-+ tristate "Realtek 8169 gigabit ethernet support"
-+ depends on PCI
-+ select CRC32
-+ ---help---
-+ Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called r8169. This is recommended.
-+
-+config R8169_NAPI
-+ bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
-+ depends on R8169 && EXPERIMENTAL
-+ help
-+ NAPI is a new driver API designed to reduce CPU and interrupt load
-+ when the driver is receiving lots of packets from the card. It is
-+ still somewhat experimental and thus not yet enabled by default.
-+
-+ If your estimated Rx load is 10kpps or more, or if the card will be
-+ deployed on potentially unfriendly networks (e.g. in a firewall),
-+ then say Y here.
-+
-+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-+ information.
-+
-+ If in doubt, say N.
-+
-+config R8169_VLAN
-+ bool "VLAN support"
-+ depends on R8169 && VLAN_8021Q
-+ ---help---
-+ Say Y here for the r8169 driver to support the functions required
-+ by the kernel 802.1Q code.
-+
-+ If in doubt, say Y.
-+
-+config SIS190
-+ tristate "SiS190/SiS191 gigabit ethernet support"
-+ depends on PCI
-+ select CRC32
-+ select MII
-+ ---help---
-+ Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
-+ a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
-+ appear in lan on motherboard designs which are based on SiS 965
-+ and SiS 966 south bridge.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called sis190. This is recommended.
-+
-+config SKGE
-+ tristate "New SysKonnect GigaEthernet support"
-+ depends on PCI
-+ select CRC32
-+ ---help---
-+ This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
-+ and related Gigabit Ethernet adapters. It is a new smaller driver
-+ with better performance and more complete ethtool support.
-+
-+ It does not support the link failover and network management
-+ features that "portable" vendor supplied sk98lin driver does.
-+
-+ This driver supports adapters based on the original Yukon chipset:
-+ Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
-+ Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
-+
-+ It does not support the newer Yukon2 chipset: a separate driver,
-+ sky2, is provided for Yukon2-based adapters.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called skge. This is recommended.
-+
-+config SKY2
-+ tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
-+ depends on PCI
-+ select CRC32
-+ ---help---
-+ This driver supports Gigabit Ethernet adapters based on the
-+ Marvell Yukon 2 chipset:
-+ Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
-+ 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
-+
-+ There is companion driver for the older Marvell Yukon and
-+ Genesis based adapters: skge.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called sky2. This is recommended.
-+
-+config SK98LIN
-+ tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
-+ depends on PCI
-+ ---help---
-+ Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
-+ compliant Gigabit Ethernet Adapter.
-+
-+ This driver supports the original Yukon chipset. This driver is
-+ deprecated and will be removed from the kernel in the near future,
-+ it has been replaced by the skge driver. skge is cleaner and
-+ seems to work better.
-+
-+ This driver does not support the newer Yukon2 chipset. A separate
-+ driver, sky2, is provided to support Yukon2-based adapters.
-+
-+ The following adapters are supported by this driver:
-+ - 3Com 3C940 Gigabit LOM Ethernet Adapter
-+ - 3Com 3C941 Gigabit LOM Ethernet Adapter
-+ - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
-+ - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
-+ - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
-+ - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
-+ - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
-+ - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
-+ - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
-+ - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
-+ - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
-+ - EG1032 v2 Instant Gigabit Network Adapter
-+ - EG1064 v2 Instant Gigabit Network Adapter
-+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
-+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
-+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
-+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
-+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
-+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
-+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
-+ - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
-+ - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
-+ - Marvell RDK-8001 Adapter
-+ - Marvell RDK-8002 Adapter
-+ - Marvell RDK-8003 Adapter
-+ - Marvell RDK-8004 Adapter
-+ - Marvell RDK-8006 Adapter
-+ - Marvell RDK-8007 Adapter
-+ - Marvell RDK-8008 Adapter
-+ - Marvell RDK-8009 Adapter
-+ - Marvell RDK-8010 Adapter
-+ - Marvell RDK-8011 Adapter
-+ - Marvell RDK-8012 Adapter
-+ - Marvell RDK-8052 Adapter
-+ - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
-+ - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
-+ - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
-+ - SK-9521 10/100/1000Base-T Adapter
-+ - SK-9521 V2.0 10/100/1000Base-T Adapter
-+ - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
-+ - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
-+ - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
-+ - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
-+ - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
-+ - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
-+ - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
-+ - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
-+ - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
-+ - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
-+ - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
-+ - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
-+ - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
-+ - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
-+ - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
-+ - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
-+ - SMC EZ Card 1000 (SMC9452TXV.2)
-+
-+ The adapters support Jumbo Frames.
-+ The dual link adapters support link-failover and dual port features.
-+ Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support
-+ the scatter-gather functionality with sendfile(). Please refer to
-+ <file:Documentation/networking/sk98lin.txt> for more information about
-+ optional driver parameters.
-+ Questions concerning this driver may be addressed to:
-+ <linux@syskonnect.de>
-+
-+ If you want to compile this driver as a module ( = code which can be
-+ inserted in and removed from the running kernel whenever you want),
-+ say M here and read <file:Documentation/kbuild/modules.txt>. The module will
-+ be called sk98lin. This is recommended.
-+
-+config VIA_VELOCITY
-+ tristate "VIA Velocity support"
-+ depends on NET_PCI && PCI
-+ select CRC32
-+ select CRC_CCITT
-+ select MII
-+ help
-+ If you have a VIA "Velocity" based network card say Y here.
-+
-+ To compile this driver as a module, choose M here. The module
-+ will be called via-velocity.
-+
-+config TIGON3
-+ tristate "Broadcom Tigon3 support"
-+ depends on PCI
-+ help
-+ This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called tg3. This is recommended.
-+
-+config BNX2
-+ tristate "Broadcom NetXtremeII support"
-+ depends on PCI
-+ select CRC32
-+ select ZLIB_INFLATE
-+ help
-+ This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called bnx2. This is recommended.
-+
-+config SPIDER_NET
-+ tristate "Spider Gigabit Ethernet driver"
-+ depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
-+ select FW_LOADER
-+ help
-+ This driver supports the Gigabit Ethernet chips present on the
-+ Cell Processor-Based Blades from IBM.
-+
-+config TSI108_ETH
-+ tristate "Tundra TSI108 gigabit Ethernet support"
-+ depends on TSI108_BRIDGE
-+ help
-+ This driver supports Tundra TSI108 gigabit Ethernet ports.
-+ To compile this driver as a module, choose M here: the module
-+ will be called tsi108_eth.
-+
-+config GIANFAR
-+ tristate "Gianfar Ethernet"
-+ depends on 85xx || 83xx || PPC_86xx
-+ select PHYLIB
-+ select CRC32
-+ help
-+ This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
-+ and MPC86xx family of chips, and the FEC on the 8540.
-+
-+config GFAR_NAPI
-+ bool "NAPI Support"
-+ depends on GIANFAR
-+
-+config UCC_GETH
-+ tristate "Freescale QE UCC GETH"
-+ depends on QUICC_ENGINE && UCC_FAST
-+ help
-+ This driver supports the Gigabit Ethernet mode of QE UCC.
-+ QE can be found on MPC836x CPUs.
-+
-+config UGETH_NAPI
-+ bool "NAPI Support"
-+ depends on UCC_GETH
-+
-+config UGETH_MAGIC_PACKET
-+ bool "Magic Packet detection support"
-+ depends on UCC_GETH
-+
-+config UGETH_FILTERING
-+ bool "Mac address filtering support"
-+ depends on UCC_GETH
-+
-+config UGETH_TX_ON_DEMOND
-+ bool "Transmit on Demond support"
-+ depends on UCC_GETH
-+
-+config UGETH_HAS_GIGA
-+ bool
-+ depends on UCC_GETH && PPC_MPC836x
-+
-+config MV643XX_ETH
-+ tristate "MV-643XX Ethernet support"
-+ depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
-+ select MII
-+ help
-+ This driver supports the gigabit Ethernet on the Marvell MV643XX
-+ chipset which is used in the Momenco Ocelot C and Jaguar ATX and
-+ Pegasos II, amongst other PPC and MIPS boards.
-+
-+config QLA3XXX
-+ tristate "QLogic QLA3XXX Network Driver Support"
-+ depends on PCI
-+ help
-+ This driver supports QLogic ISP3XXX gigabit Ethernet cards.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called qla3xxx.
-+
-+config ATL1
-+ tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)"
-+ depends on PCI && EXPERIMENTAL
-+ select CRC32
-+ select MII
-+ help
-+ This driver supports the Attansic L1 gigabit ethernet adapter.
-+
-+ To compile this driver as a module, choose M here. The module
-+ will be called atl1.
-+
-+endmenu
-+
-+#
-+# 10 Gigabit Ethernet
-+#
-+
-+menu "Ethernet (10000 Mbit)"
-+ depends on !UML
-+
-+config CHELSIO_T1
-+ tristate "Chelsio 10Gb Ethernet support"
-+ depends on PCI
-+ select CRC32
-+ help
-+ This driver supports Chelsio gigabit and 10-gigabit
-+ Ethernet cards. More information about adapter features and
-+ performance tuning is in <file:Documentation/networking/cxgb.txt>.
-+
-+ For general information about Chelsio and our products, visit
-+ our website at <http://www.chelsio.com>.
-+
-+ For customer support, please visit our customer support page at
-+ <http://www.chelsio.com/support.htm>.
-+
-+ Please send feedback to <linux-bugs@chelsio.com>.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called cxgb.
-+
-+config CHELSIO_T1_1G
-+ bool "Chelsio gigabit Ethernet support"
-+ depends on CHELSIO_T1
-+ help
-+ Enables support for Chelsio's gigabit Ethernet PCI cards. If you
-+ are using only 10G cards say 'N' here.
-+
-+config CHELSIO_T1_NAPI
-+ bool "Use Rx Polling (NAPI)"
-+ depends on CHELSIO_T1
-+ default y
-+ help
-+ NAPI is a driver API designed to reduce CPU and interrupt load
-+ when the driver is receiving lots of packets from the card.
-+
-+config CHELSIO_T3
-+ tristate "Chelsio Communications T3 10Gb Ethernet support"
-+ depends on PCI
-+ select FW_LOADER
-+ help
-+ This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
-+ adapters.
-+
-+ For general information about Chelsio and our products, visit
-+ our website at <http://www.chelsio.com>.
-+
-+ For customer support, please visit our customer support page at
-+ <http://www.chelsio.com/support.htm>.
-+
-+ Please send feedback to <linux-bugs@chelsio.com>.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called cxgb3.
-+
-+config EHEA
-+ tristate "eHEA Ethernet support"
-+ depends on IBMEBUS
-+ ---help---
-+ This driver supports the IBM pSeries eHEA ethernet adapter.
-+
-+ To compile the driver as a module, choose M here. The module
-+ will be called ehea.
-+
-+config IXGB
-+ tristate "Intel(R) PRO/10GbE support"
-+ depends on PCI
-+ ---help---
-+ This driver supports Intel(R) PRO/10GbE family of
-+ adapters. For more information on how to identify your adapter, go
-+ to the Adapter & Driver ID Guide at:
-+
-+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-+
-+ For general information and support, go to the Intel support
-+ website at:
-+
-+ <http://support.intel.com>
-+
-+ More specific information on configuring the driver is in
-+ <file:Documentation/networking/ixgb.txt>.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called ixgb.
-+
-+config IXGB_NAPI
-+ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-+ depends on IXGB && EXPERIMENTAL
-+ help
-+ NAPI is a new driver API designed to reduce CPU and interrupt load
-+ when the driver is receiving lots of packets from the card. It is
-+ still somewhat experimental and thus not yet enabled by default.
-+
-+ If your estimated Rx load is 10kpps or more, or if the card will be
-+ deployed on potentially unfriendly networks (e.g. in a firewall),
-+ then say Y here.
-+
-+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-+ information.
-+
-+ If in doubt, say N.
-+
-+config S2IO
-+ tristate "S2IO 10Gbe XFrame NIC"
-+ depends on PCI
-+ ---help---
-+ This driver supports the 10Gbe XFrame NIC of S2IO.
-+ More specific information on configuring the driver is in
-+ <file:Documentation/networking/s2io.txt>.
-+
-+config S2IO_NAPI
-+ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-+ depends on S2IO && EXPERIMENTAL
-+ help
-+ NAPI is a new driver API designed to reduce CPU and interrupt load
-+ when the driver is receiving lots of packets from the card. It is
-+ still somewhat experimental and thus not yet enabled by default.
-+
-+ If your estimated Rx load is 10kpps or more, or if the card will be
-+ deployed on potentially unfriendly networks (e.g. in a firewall),
-+ then say Y here.
-+
-+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
-+ information.
-+
-+ If in doubt, say N.
-+
-+config MYRI10GE
-+ tristate "Myricom Myri-10G Ethernet support"
-+ depends on PCI
-+ select FW_LOADER
-+ select CRC32
-+ ---help---
-+ This driver supports Myricom Myri-10G Dual Protocol interface in
-+ Ethernet mode. If the eeprom on your board is not recent enough,
-+ you will need a newer firmware image.
-+ You may get this image or more information, at:
-+
-+ <http://www.myri.com/scs/download-Myri10GE.html>
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module
-+ will be called myri10ge.
-+
-+config NETXEN_NIC
-+ tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
-+ depends on PCI
-+ help
-+ This enables the support for NetXen's Gigabit Ethernet card.
-+
-+config PASEMI_MAC
-+ tristate "PA Semi 1/10Gbit MAC"
-+ depends on PPC64 && PCI
-+ help
-+ This driver supports the on-chip 1/10Gbit Ethernet controller on
-+ PA Semi's PWRficient line of chips.
-+
-+endmenu
-+
-+source "drivers/net/tokenring/Kconfig"
-+
-+source "drivers/net/wireless/Kconfig"
-+
-+source "drivers/net/pcmcia/Kconfig"
-+
-+source "drivers/net/wan/Kconfig"
-+
-+source "drivers/atm/Kconfig"
-+
-+source "drivers/s390/net/Kconfig"
-+
-+config ISERIES_VETH
-+ tristate "iSeries Virtual Ethernet driver support"
-+ depends on PPC_ISERIES
-+
-+config RIONET
-+ tristate "RapidIO Ethernet over messaging driver support"
-+ depends on RAPIDIO
-+
-+config RIONET_TX_SIZE
-+ int "Number of outbound queue entries"
-+ depends on RIONET
-+ default "128"
-+
-+config RIONET_RX_SIZE
-+ int "Number of inbound queue entries"
-+ depends on RIONET
-+ default "128"
-+
-+config FDDI
-+ bool "FDDI driver support"
-+ depends on (PCI || EISA || TC)
-+ help
-+ Fiber Distributed Data Interface is a high speed local area network
-+ design; essentially a replacement for high speed Ethernet. FDDI can
-+ run over copper or fiber. If you are connected to such a network and
-+ want a driver for the FDDI card in your computer, say Y here (and
-+ then also Y to the driver for your FDDI card, below). Most people
-+ will say N.
-+
-+config DEFXX
-+ tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
-+ depends on FDDI && (PCI || EISA || TC)
-+ ---help---
-+ This is support for the DIGITAL series of TURBOchannel (DEFTA),
-+ EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
-+ to a local FDDI network.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called defxx. If unsure, say N.
-+
-+config DEFXX_MMIO
-+ bool
-+ prompt "Use MMIO instead of PIO" if PCI || EISA
-+ depends on DEFXX
-+ default n if PCI || EISA
-+ default y
-+ ---help---
-+ This instructs the driver to use EISA or PCI memory-mapped I/O
-+ (MMIO) as appropriate instead of programmed I/O ports (PIO).
-+ Enabling this gives an improvement in processing time in parts
-+ of the driver, but it may cause problems with EISA (DEFEA)
-+ adapters. TURBOchannel does not have the concept of I/O ports,
-+ so MMIO is always used for these (DEFTA) adapters.
-+
-+ If unsure, say N.
-+
-+config SKFP
-+ tristate "SysKonnect FDDI PCI support"
-+ depends on FDDI && PCI
-+ select BITREVERSE
-+ ---help---
-+ Say Y here if you have a SysKonnect FDDI PCI adapter.
-+ The following adapters are supported by this driver:
-+ - SK-5521 (SK-NET FDDI-UP)
-+ - SK-5522 (SK-NET FDDI-UP DAS)
-+ - SK-5541 (SK-NET FDDI-FP)
-+ - SK-5543 (SK-NET FDDI-LP)
-+ - SK-5544 (SK-NET FDDI-LP DAS)
-+ - SK-5821 (SK-NET FDDI-UP64)
-+ - SK-5822 (SK-NET FDDI-UP64 DAS)
-+ - SK-5841 (SK-NET FDDI-FP64)
-+ - SK-5843 (SK-NET FDDI-LP64)
-+ - SK-5844 (SK-NET FDDI-LP64 DAS)
-+ - Netelligent 100 FDDI DAS Fibre SC
-+ - Netelligent 100 FDDI SAS Fibre SC
-+ - Netelligent 100 FDDI DAS UTP
-+ - Netelligent 100 FDDI SAS UTP
-+ - Netelligent 100 FDDI SAS Fibre MIC
-+
-+ Read <file:Documentation/networking/skfp.txt> for information about
-+ the driver.
-+
-+ Questions concerning this driver can be addressed to:
-+ <linux@syskonnect.de>
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called skfp. This is recommended.
-+
-+config HIPPI
-+ bool "HIPPI driver support (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL && INET && PCI
-+ help
-+ HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
-+ 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
-+ can run over copper (25m) or fiber (300m on multi-mode or 10km on
-+ single-mode). HIPPI networks are commonly used for clusters and to
-+ connect to super computers. If you are connected to a HIPPI network
-+ and have a HIPPI network card in your computer that you want to use
-+ under Linux, say Y here (you must also remember to enable the driver
-+ for your HIPPI card below). Most people will say N here.
-+
-+config ROADRUNNER
-+ tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
-+ depends on HIPPI && PCI
-+ help
-+ Say Y here if this is your PCI HIPPI network card.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called rrunner. If unsure, say N.
-+
-+config ROADRUNNER_LARGE_RINGS
-+ bool "Use large TX/RX rings (EXPERIMENTAL)"
-+ depends on ROADRUNNER
-+ help
-+ If you say Y here, the RoadRunner driver will preallocate up to 2 MB
-+ of additional memory to allow for fastest operation, both for
-+ transmitting and receiving. This memory cannot be used by any other
-+ kernel code or by user space programs. Say Y here only if you have
-+ the memory.
-+
-+config PLIP
-+ tristate "PLIP (parallel port) support"
-+ depends on PARPORT
-+ ---help---
-+ PLIP (Parallel Line Internet Protocol) is used to create a
-+ reasonably fast mini network consisting of two (or, rarely, more)
-+ local machines. A PLIP link from a Linux box is a popular means to
-+ install a Linux distribution on a machine which doesn't have a
-+ CD-ROM drive (a minimal system has to be transferred with floppies
-+ first). The kernels on both machines need to have this PLIP option
-+ enabled for this to work.
-+
-+ The PLIP driver has two modes, mode 0 and mode 1. The parallel
-+ ports (the connectors at the computers with 25 holes) are connected
-+ with "null printer" or "Turbo Laplink" cables which can transmit 4
-+ bits at a time (mode 0) or with special PLIP cables, to be used on
-+ bidirectional parallel ports only, which can transmit 8 bits at a
-+ time (mode 1); you can find the wiring of these cables in
-+ <file:Documentation/networking/PLIP.txt>. The cables can be up to
-+ 15m long. Mode 0 works also if one of the machines runs DOS/Windows
-+ and has some PLIP software installed, e.g. the Crynwr PLIP packet
-+ driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
-+ and winsock or NCSA's telnet.
-+
-+ If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
-+ as the NET-3-HOWTO, both available from
-+ <http://www.tldp.org/docs.html#howto>. Note that the PLIP
-+ protocol has been changed and this PLIP driver won't work together
-+ with the PLIP support in Linux versions 1.0.x. This option enlarges
-+ your kernel by about 8 KB.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module will be
-+ called plip. If unsure, say Y or M, in case you buy a laptop
-+ later.
-+
-+config PPP
-+ tristate "PPP (point-to-point protocol) support"
-+ select SLHC
-+ ---help---
-+ PPP (Point to Point Protocol) is a newer and better SLIP. It serves
-+ the same purpose: sending Internet traffic over telephone (and other
-+ serial) lines. Ask your access provider if they support it, because
-+ otherwise you can't use it; most Internet access providers these
-+ days support PPP rather than SLIP.
-+
-+ To use PPP, you need an additional program called pppd as described
-+ in the PPP-HOWTO, available at
-+ <http://www.tldp.org/docs.html#howto>. Make sure that you have
-+ the version of pppd recommended in <file:Documentation/Changes>.
-+ The PPP option enlarges your kernel by about 16 KB.
-+
-+ There are actually two versions of PPP: the traditional PPP for
-+ asynchronous lines, such as regular analog phone lines, and
-+ synchronous PPP which can be used over digital ISDN lines for
-+ example. If you want to use PPP over phone lines or other
-+ asynchronous serial lines, you need to say Y (or M) here and also to
-+ the next option, "PPP support for async serial ports". For PPP over
-+ synchronous lines, you should say Y (or M) here and to "Support
-+ synchronous PPP", below.
-+
-+ If you said Y to "Version information on all symbols" above, then
-+ you cannot compile the PPP driver into the kernel; you can then only
-+ compile it as a module. To compile this driver as a module, choose M
-+ here and read <file:Documentation/networking/net-modules.txt>.
-+ The module will be called ppp_generic.
-+
-+config PPP_MULTILINK
-+ bool "PPP multilink support (EXPERIMENTAL)"
-+ depends on PPP && EXPERIMENTAL
-+ help
-+ PPP multilink is a protocol (defined in RFC 1990) which allows you
-+ to combine several (logical or physical) lines into one logical PPP
-+ connection, so that you can utilize your full bandwidth.
-+
-+ This has to be supported at the other end as well and you need a
-+ version of the pppd daemon which understands the multilink protocol.
-+
-+ If unsure, say N.
-+
-+config PPP_FILTER
-+ bool "PPP filtering"
-+ depends on PPP
-+ help
-+ Say Y here if you want to be able to filter the packets passing over
-+ PPP interfaces. This allows you to control which packets count as
-+ activity (i.e. which packets will reset the idle timer or bring up
-+ a demand-dialed link) and which packets are to be dropped entirely.
-+ You need to say Y here if you wish to use the pass-filter and
-+ active-filter options to pppd.
-+
-+ If unsure, say N.
-+
-+config PPP_ASYNC
-+ tristate "PPP support for async serial ports"
-+ depends on PPP
-+ select CRC_CCITT
-+ ---help---
-+ Say Y (or M) here if you want to be able to use PPP over standard
-+ asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
-+ a modem (not a synchronous or ISDN modem) to contact your ISP, you
-+ need this option.
-+
-+ To compile this driver as a module, choose M here.
-+
-+ If unsure, say Y.
-+
-+config PPP_SYNC_TTY
-+ tristate "PPP support for sync tty ports"
-+ depends on PPP
-+ help
-+ Say Y (or M) here if you want to be able to use PPP over synchronous
-+ (HDLC) tty devices, such as the SyncLink adapter. These devices
-+ are often used for high-speed leased lines like T1/E1.
-+
-+ To compile this driver as a module, choose M here.
-+
-+config PPP_DEFLATE
-+ tristate "PPP Deflate compression"
-+ depends on PPP
-+ select ZLIB_INFLATE
-+ select ZLIB_DEFLATE
-+ ---help---
-+ Support for the Deflate compression method for PPP, which uses the
-+ Deflate algorithm (the same algorithm that gzip uses) to compress
-+ each PPP packet before it is sent over the wire. The machine at the
-+ other end of the PPP link (usually your ISP) has to support the
-+ Deflate compression method as well for this to be useful. Even if
-+ they don't support it, it is safe to say Y here.
-+
-+ To compile this driver as a module, choose M here.
-+
-+config PPP_BSDCOMP
-+ tristate "PPP BSD-Compress compression"
-+ depends on PPP
-+ ---help---
-+ Support for the BSD-Compress compression method for PPP, which uses
-+ the LZW compression method to compress each PPP packet before it is
-+ sent over the wire. The machine at the other end of the PPP link
-+ (usually your ISP) has to support the BSD-Compress compression
-+ method as well for this to be useful. Even if they don't support it,
-+ it is safe to say Y here.
-+
-+ The PPP Deflate compression method ("PPP Deflate compression",
-+ above) is preferable to BSD-Compress, because it compresses better
-+ and is patent-free.
-+
-+ Note that the BSD compression code will always be compiled as a
-+ module; it is called bsd_comp and will show up in the directory
-+ modules once you have said "make modules". If unsure, say N.
-+
-+config PPP_MPPE
-+ tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
-+ depends on PPP && EXPERIMENTAL
-+ select CRYPTO
-+ select CRYPTO_SHA1
-+ select CRYPTO_ARC4
-+ select CRYPTO_ECB
-+ ---help---
-+ Support for the MPPE Encryption protocol, as employed by the
-+ Microsoft Point-to-Point Tunneling Protocol.
-+
-+ See http://pptpclient.sourceforge.net/ for information on
-+ configuring PPTP clients and servers to utilize this method.
-+
-+config PPPOE
-+ tristate "PPP over Ethernet (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL && PPP
-+ help
-+ Support for PPP over Ethernet.
-+
-+ This driver requires the latest version of pppd from the CVS
-+ repository at cvs.samba.org. Alternatively, see the
-+ RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
-+ which contains instruction on how to use this driver (under
-+ the heading "Kernel mode PPPoE").
-+
-+config PPPOATM
-+ tristate "PPP over ATM"
-+ depends on ATM && PPP
-+ help
-+ Support PPP (Point to Point Protocol) encapsulated in ATM frames.
-+ This implementation does not yet comply with section 8 of RFC2364,
-+ which can lead to bad results if the ATM peer loses state and
-+ changes its encapsulation unilaterally.
-+
-+config SLIP
-+ tristate "SLIP (serial line) support"
-+ ---help---
-+ Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
-+ connect to your Internet service provider or to connect to some
-+ other local Unix box or if you want to configure your Linux box as a
-+ Slip/CSlip server for other people to dial in. SLIP (Serial Line
-+ Internet Protocol) is a protocol used to send Internet traffic over
-+ serial connections such as telephone lines or null modem cables;
-+ nowadays, the protocol PPP is more commonly used for this same
-+ purpose.
-+
-+ Normally, your access provider has to support SLIP in order for you
-+ to be able to use it, but there is now a SLIP emulator called SLiRP
-+ around (available from
-+ <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
-+ allows you to use SLIP over a regular dial up shell connection. If
-+ you plan to use SLiRP, make sure to say Y to CSLIP, below. The
-+ NET-3-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>, explains how to
-+ configure SLIP. Note that you don't need this option if you just
-+ want to run term (term is a program which gives you almost full
-+ Internet connectivity if you have a regular dial up shell account on
-+ some Internet connected Unix computer. Read
-+ <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
-+ support will enlarge your kernel by about 4 KB. If unsure, say N.
-+
-+ To compile this driver as a module, choose M here and read
-+ <file:Documentation/networking/net-modules.txt>. The module will be
-+ called slip.
-+
-+config SLIP_COMPRESSED
-+ bool "CSLIP compressed headers"
-+ depends on SLIP
-+ select SLHC
-+ ---help---
-+ This protocol is faster than SLIP because it uses compression on the
-+ TCP/IP headers (not on the data itself), but it has to be supported
-+ on both ends. Ask your access provider if you are not sure and
-+ answer Y, just in case. You will still be able to use plain SLIP. If
-+ you plan to use SLiRP, the SLIP emulator (available from
-+ <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
-+ allows you to use SLIP over a regular dial up shell connection, you
-+ definitely want to say Y here. The NET-3-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>, explains how to configure
-+ CSLIP. This won't enlarge your kernel.
-+
-+config SLHC
-+ tristate
-+ help
-+ This option enables Van Jacobsen serial line header compression
-+ routines.
-+
-+config SLIP_SMART
-+ bool "Keepalive and linefill"
-+ depends on SLIP
-+ help
-+ Adds additional capabilities to the SLIP driver to support the
-+ RELCOM line fill and keepalive monitoring. Ideal on poor quality
-+ analogue lines.
-+
-+config SLIP_MODE_SLIP6
-+ bool "Six bit SLIP encapsulation"
-+ depends on SLIP
-+ help
-+ Just occasionally you may need to run IP over hostile serial
-+ networks that don't pass all control characters or are only seven
-+ bit. Saying Y here adds an extra mode you can use with SLIP:
-+ "slip6". In this mode, SLIP will only send normal ASCII symbols over
-+ the serial device. Naturally, this has to be supported at the other
-+ end of the link as well. It's good enough, for example, to run IP
-+ over the async ports of a Camtec JNT Pad. If unsure, say N.
-+
-+config NET_FC
-+ bool "Fibre Channel driver support"
-+ depends on SCSI && PCI
-+ help
-+ Fibre Channel is a high speed serial protocol mainly used to connect
-+ large storage devices to the computer; it is compatible with and
-+ intended to replace SCSI.
-+
-+ If you intend to use Fibre Channel, you need to have a Fibre channel
-+ adaptor card in your computer; say Y here and to the driver for your
-+ adaptor below. You also should have said Y to "SCSI support" and
-+ "SCSI generic support".
-+
-+config SHAPER
-+ tristate "Traffic Shaper (OBSOLETE)"
-+ depends on EXPERIMENTAL
-+ ---help---
-+ The traffic shaper is a virtual network device that allows you to
-+ limit the rate of outgoing data flow over some other network device.
-+ The traffic that you want to slow down can then be routed through
-+ these virtual devices. See
-+ <file:Documentation/networking/shaper.txt> for more information.
-+
-+ An alternative to this traffic shaper are traffic schedulers which
-+ you'll get if you say Y to "QoS and/or fair queuing" in
-+ "Networking options".
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called shaper. If unsure, say N.
-+
-+config NETCONSOLE
-+ tristate "Network console logging support (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ ---help---
-+ If you want to log kernel messages over the network, enable this.
-+ See <file:Documentation/networking/netconsole.txt> for details.
-+
-+endif #NETDEVICES
-+
-+config NETPOLL
-+ def_bool NETCONSOLE
-+
-+config NETPOLL_RX
-+ bool "Netpoll support for trapping incoming packets"
-+ default n
-+ depends on NETPOLL
-+
-+config NETPOLL_TRAP
-+ bool "Netpoll traffic trapping"
-+ default n
-+ depends on NETPOLL
-+
-+config NET_POLL_CONTROLLER
-+ def_bool NETPOLL
-+
-+endmenu
diff -Nur linux-2.6.21.1/drivers/net/Makefile linux-2.6.21.1-owrt/drivers/net/Makefile
--- linux-2.6.21.1/drivers/net/Makefile 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/net/Makefile 2007-05-23 23:37:01.000000000 +0200
@@ -3682,231 +188,6 @@ diff -Nur linux-2.6.21.1/drivers/net/Makefile linux-2.6.21.1-owrt/drivers/net/Ma
obj-$(CONFIG_DGRS) += dgrs.o
obj-$(CONFIG_VORTEX) += 3c59x.o
obj-$(CONFIG_TYPHOON) += typhoon.o
-diff -Nur linux-2.6.21.1/drivers/net/Makefile.orig linux-2.6.21.1-owrt/drivers/net/Makefile.orig
---- linux-2.6.21.1/drivers/net/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1-owrt/drivers/net/Makefile.orig 2007-05-23 23:34:01.000000000 +0200
-@@ -0,0 +1,221 @@
-+#
-+# Makefile for the Linux network (ethercard) device drivers.
-+#
-+
-+obj-$(CONFIG_E1000) += e1000/
-+obj-$(CONFIG_IBM_EMAC) += ibm_emac/
-+obj-$(CONFIG_IXGB) += ixgb/
-+obj-$(CONFIG_CHELSIO_T1) += chelsio/
-+obj-$(CONFIG_CHELSIO_T3) += cxgb3/
-+obj-$(CONFIG_EHEA) += ehea/
-+obj-$(CONFIG_BONDING) += bonding/
-+obj-$(CONFIG_ATL1) += atl1/
-+obj-$(CONFIG_GIANFAR) += gianfar_driver.o
-+
-+gianfar_driver-objs := gianfar.o \
-+ gianfar_ethtool.o \
-+ gianfar_mii.o \
-+ gianfar_sysfs.o
-+
-+obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
-+ucc_geth_driver-objs := ucc_geth.o ucc_geth_phy.o
-+
-+#
-+# link order important here
-+#
-+obj-$(CONFIG_PLIP) += plip.o
-+
-+obj-$(CONFIG_ROADRUNNER) += rrunner.o
-+
-+obj-$(CONFIG_HAPPYMEAL) += sunhme.o
-+obj-$(CONFIG_SUNLANCE) += sunlance.o
-+obj-$(CONFIG_SUNQE) += sunqe.o
-+obj-$(CONFIG_SUNBMAC) += sunbmac.o
-+obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o
-+obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
-+obj-$(CONFIG_CASSINI) += cassini.o
-+
-+obj-$(CONFIG_MACE) += mace.o
-+obj-$(CONFIG_BMAC) += bmac.o
-+
-+obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o
-+obj-$(CONFIG_DGRS) += dgrs.o
-+obj-$(CONFIG_VORTEX) += 3c59x.o
-+obj-$(CONFIG_TYPHOON) += typhoon.o
-+obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
-+obj-$(CONFIG_PCNET32) += pcnet32.o
-+obj-$(CONFIG_EEPRO100) += eepro100.o
-+obj-$(CONFIG_E100) += e100.o
-+obj-$(CONFIG_TLAN) += tlan.o
-+obj-$(CONFIG_EPIC100) += epic100.o
-+obj-$(CONFIG_SIS190) += sis190.o
-+obj-$(CONFIG_SIS900) += sis900.o
-+obj-$(CONFIG_YELLOWFIN) += yellowfin.o
-+obj-$(CONFIG_ACENIC) += acenic.o
-+obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
-+obj-$(CONFIG_NATSEMI) += natsemi.o
-+obj-$(CONFIG_NS83820) += ns83820.o
-+obj-$(CONFIG_STNIC) += stnic.o 8390.o
-+obj-$(CONFIG_FEALNX) += fealnx.o
-+obj-$(CONFIG_TIGON3) += tg3.o
-+obj-$(CONFIG_BNX2) += bnx2.o
-+spidernet-y += spider_net.o spider_net_ethtool.o
-+obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
-+obj-$(CONFIG_TC35815) += tc35815.o
-+obj-$(CONFIG_SKGE) += skge.o
-+obj-$(CONFIG_SKY2) += sky2.o
-+obj-$(CONFIG_SK98LIN) += sk98lin/
-+obj-$(CONFIG_SKFP) += skfp/
-+obj-$(CONFIG_VIA_RHINE) += via-rhine.o
-+obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
-+obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
-+obj-$(CONFIG_RIONET) += rionet.o
-+
-+#
-+# end link order section
-+#
-+
-+obj-$(CONFIG_MII) += mii.o
-+obj-$(CONFIG_PHYLIB) += phy/
-+
-+obj-$(CONFIG_SUNDANCE) += sundance.o
-+obj-$(CONFIG_HAMACHI) += hamachi.o
-+obj-$(CONFIG_NET) += Space.o loopback.o
-+obj-$(CONFIG_SEEQ8005) += seeq8005.o
-+obj-$(CONFIG_NET_SB1000) += sb1000.o
-+obj-$(CONFIG_MAC8390) += mac8390.o
-+obj-$(CONFIG_APNE) += apne.o 8390.o
-+obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
-+obj-$(CONFIG_SHAPER) += shaper.o
-+obj-$(CONFIG_HP100) += hp100.o
-+obj-$(CONFIG_SMC9194) += smc9194.o
-+obj-$(CONFIG_FEC) += fec.o
-+obj-$(CONFIG_68360_ENET) += 68360enet.o
-+obj-$(CONFIG_WD80x3) += wd.o 8390.o
-+obj-$(CONFIG_EL2) += 3c503.o 8390.o
-+obj-$(CONFIG_NE2000) += ne.o 8390.o
-+obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
-+obj-$(CONFIG_HPLAN) += hp.o 8390.o
-+obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
-+obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
-+obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
-+obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
-+obj-$(CONFIG_E2100) += e2100.o 8390.o
-+obj-$(CONFIG_ES3210) += es3210.o 8390.o
-+obj-$(CONFIG_LNE390) += lne390.o 8390.o
-+obj-$(CONFIG_NE3210) += ne3210.o 8390.o
-+obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
-+obj-$(CONFIG_B44) += b44.o
-+obj-$(CONFIG_FORCEDETH) += forcedeth.o
-+obj-$(CONFIG_NE_H8300) += ne-h8300.o
-+
-+obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
-+obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
-+obj-$(CONFIG_QLA3XXX) += qla3xxx.o
-+
-+obj-$(CONFIG_PPP) += ppp_generic.o
-+obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
-+obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
-+obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
-+obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
-+obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
-+obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
-+
-+obj-$(CONFIG_SLIP) += slip.o
-+obj-$(CONFIG_SLHC) += slhc.o
-+
-+obj-$(CONFIG_DUMMY) += dummy.o
-+obj-$(CONFIG_IFB) += ifb.o
-+obj-$(CONFIG_DE600) += de600.o
-+obj-$(CONFIG_DE620) += de620.o
-+obj-$(CONFIG_LANCE) += lance.o
-+obj-$(CONFIG_SUN3_82586) += sun3_82586.o
-+obj-$(CONFIG_SUN3LANCE) += sun3lance.o
-+obj-$(CONFIG_DEFXX) += defxx.o
-+obj-$(CONFIG_SGISEEQ) += sgiseeq.o
-+obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
-+obj-$(CONFIG_AT1700) += at1700.o
-+obj-$(CONFIG_EL1) += 3c501.o
-+obj-$(CONFIG_EL16) += 3c507.o
-+obj-$(CONFIG_ELMC) += 3c523.o
-+obj-$(CONFIG_IBMLANA) += ibmlana.o
-+obj-$(CONFIG_ELMC_II) += 3c527.o
-+obj-$(CONFIG_EL3) += 3c509.o
-+obj-$(CONFIG_3C515) += 3c515.o
-+obj-$(CONFIG_EEXPRESS) += eexpress.o
-+obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
-+obj-$(CONFIG_8139CP) += 8139cp.o
-+obj-$(CONFIG_8139TOO) += 8139too.o
-+obj-$(CONFIG_ZNET) += znet.o
-+obj-$(CONFIG_LAN_SAA9730) += saa9730.o
-+obj-$(CONFIG_DEPCA) += depca.o
-+obj-$(CONFIG_EWRK3) += ewrk3.o
-+obj-$(CONFIG_ATP) += atp.o
-+obj-$(CONFIG_NI5010) += ni5010.o
-+obj-$(CONFIG_NI52) += ni52.o
-+obj-$(CONFIG_NI65) += ni65.o
-+obj-$(CONFIG_ELPLUS) += 3c505.o
-+obj-$(CONFIG_AC3200) += ac3200.o 8390.o
-+obj-$(CONFIG_APRICOT) += 82596.o
-+obj-$(CONFIG_LASI_82596) += lasi_82596.o
-+obj-$(CONFIG_MVME16x_NET) += 82596.o
-+obj-$(CONFIG_BVME6000_NET) += 82596.o
-+obj-$(CONFIG_SC92031) += sc92031.o
-+
-+# This is also a 82596 and should probably be merged
-+obj-$(CONFIG_LP486E) += lp486e.o
-+
-+obj-$(CONFIG_ETH16I) += eth16i.o
-+obj-$(CONFIG_ZORRO8390) += zorro8390.o
-+obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
-+obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
-+obj-$(CONFIG_EQUALIZER) += eql.o
-+obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
-+obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
-+obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
-+obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-+obj-$(CONFIG_DECLANCE) += declance.o
-+obj-$(CONFIG_ATARILANCE) += atarilance.o
-+obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o
-+obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o
-+obj-$(CONFIG_A2065) += a2065.o
-+obj-$(CONFIG_HYDRA) += hydra.o
-+obj-$(CONFIG_ARIADNE) += ariadne.o
-+obj-$(CONFIG_CS89x0) += cs89x0.o
-+obj-$(CONFIG_MACSONIC) += macsonic.o
-+obj-$(CONFIG_MACMACE) += macmace.o
-+obj-$(CONFIG_MAC89x0) += mac89x0.o
-+obj-$(CONFIG_TUN) += tun.o
-+obj-$(CONFIG_NET_NETX) += netx-eth.o
-+obj-$(CONFIG_DL2K) += dl2k.o
-+obj-$(CONFIG_R8169) += r8169.o
-+obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
-+obj-$(CONFIG_IBMVETH) += ibmveth.o
-+obj-$(CONFIG_S2IO) += s2io.o
-+obj-$(CONFIG_MYRI10GE) += myri10ge/
-+obj-$(CONFIG_SMC91X) += smc91x.o
-+obj-$(CONFIG_SMC911X) += smc911x.o
-+obj-$(CONFIG_DM9000) += dm9000.o
-+obj-$(CONFIG_FEC_8XX) += fec_8xx/
-+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
-+
-+obj-$(CONFIG_MACB) += macb.o
-+
-+obj-$(CONFIG_ARM) += arm/
-+obj-$(CONFIG_DEV_APPLETALK) += appletalk/
-+obj-$(CONFIG_TR) += tokenring/
-+obj-$(CONFIG_WAN) += wan/
-+obj-$(CONFIG_ARCNET) += arcnet/
-+obj-$(CONFIG_NET_PCMCIA) += pcmcia/
-+obj-$(CONFIG_NET_RADIO) += wireless/
-+obj-$(CONFIG_NET_TULIP) += tulip/
-+obj-$(CONFIG_HAMRADIO) += hamradio/
-+obj-$(CONFIG_IRDA) += irda/
-+obj-$(CONFIG_ETRAX_ETHERNET) += cris/
-+obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
-+
-+obj-$(CONFIG_NETCONSOLE) += netconsole.o
-+
-+obj-$(CONFIG_FS_ENET) += fs_enet/
-+
-+obj-$(CONFIG_NETXEN_NIC) += netxen/
diff -Nur linux-2.6.21.1/drivers/net/natsemi.c linux-2.6.21.1-owrt/drivers/net/natsemi.c
--- linux-2.6.21.1/drivers/net/natsemi.c 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/net/natsemi.c 2007-05-23 23:34:01.000000000 +0200
@@ -4032,183 +313,6 @@ diff -Nur linux-2.6.21.1/drivers/pci/access.c linux-2.6.21.1-owrt/drivers/pci/ac
#define PCI_OP_WRITE(size,type,len) \
int pci_bus_write_config_##size \
(struct pci_bus *bus, unsigned int devfn, int pos, type value) \
-diff -Nur linux-2.6.21.1/drivers/pci/access.c.orig linux-2.6.21.1-owrt/drivers/pci/access.c.orig
---- linux-2.6.21.1/drivers/pci/access.c.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1-owrt/drivers/pci/access.c.orig 2007-04-27 23:49:26.000000000 +0200
-@@ -0,0 +1,173 @@
-+#include <linux/pci.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/ioport.h>
-+#include <linux/wait.h>
-+
-+#include "pci.h"
-+
-+/*
-+ * This interrupt-safe spinlock protects all accesses to PCI
-+ * configuration space.
-+ */
-+
-+static DEFINE_SPINLOCK(pci_lock);
-+
-+/*
-+ * Wrappers for all PCI configuration access functions. They just check
-+ * alignment, do locking and call the low-level functions pointed to
-+ * by pci_dev->ops.
-+ */
-+
-+#define PCI_byte_BAD 0
-+#define PCI_word_BAD (pos & 1)
-+#define PCI_dword_BAD (pos & 3)
-+
-+#define PCI_OP_READ(size,type,len) \
-+int pci_bus_read_config_##size \
-+ (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
-+{ \
-+ int res; \
-+ unsigned long flags; \
-+ u32 data = 0; \
-+ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
-+ spin_lock_irqsave(&pci_lock, flags); \
-+ res = bus->ops->read(bus, devfn, pos, len, &data); \
-+ *value = (type)data; \
-+ spin_unlock_irqrestore(&pci_lock, flags); \
-+ return res; \
-+}
-+
-+#define PCI_OP_WRITE(size,type,len) \
-+int pci_bus_write_config_##size \
-+ (struct pci_bus *bus, unsigned int devfn, int pos, type value) \
-+{ \
-+ int res; \
-+ unsigned long flags; \
-+ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
-+ spin_lock_irqsave(&pci_lock, flags); \
-+ res = bus->ops->write(bus, devfn, pos, len, value); \
-+ spin_unlock_irqrestore(&pci_lock, flags); \
-+ return res; \
-+}
-+
-+PCI_OP_READ(byte, u8, 1)
-+PCI_OP_READ(word, u16, 2)
-+PCI_OP_READ(dword, u32, 4)
-+PCI_OP_WRITE(byte, u8, 1)
-+PCI_OP_WRITE(word, u16, 2)
-+PCI_OP_WRITE(dword, u32, 4)
-+
-+EXPORT_SYMBOL(pci_bus_read_config_byte);
-+EXPORT_SYMBOL(pci_bus_read_config_word);
-+EXPORT_SYMBOL(pci_bus_read_config_dword);
-+EXPORT_SYMBOL(pci_bus_write_config_byte);
-+EXPORT_SYMBOL(pci_bus_write_config_word);
-+EXPORT_SYMBOL(pci_bus_write_config_dword);
-+
-+/*
-+ * The following routines are to prevent the user from accessing PCI config
-+ * space when it's unsafe to do so. Some devices require this during BIST and
-+ * we're required to prevent it during D-state transitions.
-+ *
-+ * We have a bit per device to indicate it's blocked and a global wait queue
-+ * for callers to sleep on until devices are unblocked.
-+ */
-+static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait);
-+
-+static noinline void pci_wait_ucfg(struct pci_dev *dev)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+
-+ __add_wait_queue(&pci_ucfg_wait, &wait);
-+ do {
-+ set_current_state(TASK_UNINTERRUPTIBLE);
-+ spin_unlock_irq(&pci_lock);
-+ schedule();
-+ spin_lock_irq(&pci_lock);
-+ } while (dev->block_ucfg_access);
-+ __remove_wait_queue(&pci_ucfg_wait, &wait);
-+}
-+
-+#define PCI_USER_READ_CONFIG(size,type) \
-+int pci_user_read_config_##size \
-+ (struct pci_dev *dev, int pos, type *val) \
-+{ \
-+ int ret = 0; \
-+ u32 data = -1; \
-+ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
-+ spin_lock_irq(&pci_lock); \
-+ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
-+ ret = dev->bus->ops->read(dev->bus, dev->devfn, \
-+ pos, sizeof(type), &data); \
-+ spin_unlock_irq(&pci_lock); \
-+ *val = (type)data; \
-+ return ret; \
-+}
-+
-+#define PCI_USER_WRITE_CONFIG(size,type) \
-+int pci_user_write_config_##size \
-+ (struct pci_dev *dev, int pos, type val) \
-+{ \
-+ int ret = -EIO; \
-+ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
-+ spin_lock_irq(&pci_lock); \
-+ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
-+ ret = dev->bus->ops->write(dev->bus, dev->devfn, \
-+ pos, sizeof(type), val); \
-+ spin_unlock_irq(&pci_lock); \
-+ return ret; \
-+}
-+
-+PCI_USER_READ_CONFIG(byte, u8)
-+PCI_USER_READ_CONFIG(word, u16)
-+PCI_USER_READ_CONFIG(dword, u32)
-+PCI_USER_WRITE_CONFIG(byte, u8)
-+PCI_USER_WRITE_CONFIG(word, u16)
-+PCI_USER_WRITE_CONFIG(dword, u32)
-+
-+/**
-+ * pci_block_user_cfg_access - Block userspace PCI config reads/writes
-+ * @dev: pci device struct
-+ *
-+ * When user access is blocked, any reads or writes to config space will
-+ * sleep until access is unblocked again. We don't allow nesting of
-+ * block/unblock calls.
-+ */
-+void pci_block_user_cfg_access(struct pci_dev *dev)
-+{
-+ unsigned long flags;
-+ int was_blocked;
-+
-+ spin_lock_irqsave(&pci_lock, flags);
-+ was_blocked = dev->block_ucfg_access;
-+ dev->block_ucfg_access = 1;
-+ spin_unlock_irqrestore(&pci_lock, flags);
-+
-+ /* If we BUG() inside the pci_lock, we're guaranteed to hose
-+ * the machine */
-+ BUG_ON(was_blocked);
-+}
-+EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
-+
-+/**
-+ * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes
-+ * @dev: pci device struct
-+ *
-+ * This function allows userspace PCI config accesses to resume.
-+ */
-+void pci_unblock_user_cfg_access(struct pci_dev *dev)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&pci_lock, flags);
-+
-+ /* This indicates a problem in the caller, but we don't need
-+ * to kill them, unlike a double-block above. */
-+ WARN_ON(!dev->block_ucfg_access);
-+
-+ dev->block_ucfg_access = 0;
-+ wake_up_all(&pci_ucfg_wait);
-+ spin_unlock_irqrestore(&pci_lock, flags);
-+}
-+EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);
diff -Nur linux-2.6.21.1/drivers/serial/8250.c linux-2.6.21.1-owrt/drivers/serial/8250.c
--- linux-2.6.21.1/drivers/serial/8250.c 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/serial/8250.c 2007-05-23 23:37:11.000000000 +0200
@@ -4240,2827 +344,6 @@ diff -Nur linux-2.6.21.1/drivers/serial/8250.c linux-2.6.21.1-owrt/drivers/seria
spin_unlock_irqrestore(&up->port.lock, flags);
/*
-diff -Nur linux-2.6.21.1/drivers/serial/8250.c.orig linux-2.6.21.1-owrt/drivers/serial/8250.c.orig
---- linux-2.6.21.1/drivers/serial/8250.c.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1-owrt/drivers/serial/8250.c.orig 2007-04-27 23:49:26.000000000 +0200
-@@ -0,0 +1,2817 @@
-+/*
-+ * linux/drivers/char/8250.c
-+ *
-+ * Driver for 8250/16550-type serial ports
-+ *
-+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
-+ *
-+ * Copyright (C) 2001 Russell King.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * $Id: 8250.c,v 1.90 2002/07/28 10:03:27 rmk Exp $
-+ *
-+ * A note about mapbase / membase
-+ *
-+ * mapbase is the physical address of the IO port.
-+ * membase is an 'ioremapped' cookie.
-+ */
-+
-+#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#define SUPPORT_SYSRQ
-+#endif
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/console.h>
-+#include <linux/sysrq.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/serial_reg.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/nmi.h>
-+#include <linux/mutex.h>
-+
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+
-+#include "8250.h"
-+
-+/*
-+ * Configuration:
-+ * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
-+ * is unsafe when used on edge-triggered interrupts.
-+ */
-+static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
-+
-+static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
-+
-+/*
-+ * Debugging.
-+ */
-+#if 0
-+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
-+#else
-+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
-+#endif
-+
-+#if 0
-+#define DEBUG_INTR(fmt...) printk(fmt)
-+#else
-+#define DEBUG_INTR(fmt...) do { } while (0)
-+#endif
-+
-+#define PASS_LIMIT 256
-+
-+/*
-+ * We default to IRQ0 for the "no irq" hack. Some
-+ * machine types want others as well - they're free
-+ * to redefine this in their header file.
-+ */
-+#define is_real_interrupt(irq) ((irq) != 0)
-+
-+#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-+#define CONFIG_SERIAL_DETECT_IRQ 1
-+#endif
-+#ifdef CONFIG_SERIAL_8250_MANY_PORTS
-+#define CONFIG_SERIAL_MANY_PORTS 1
-+#endif
-+
-+/*
-+ * HUB6 is always on. This will be removed once the header
-+ * files have been cleaned.
-+ */
-+#define CONFIG_HUB6 1
-+
-+#include <asm/serial.h>
-+
-+/*
-+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
-+ * standard enumeration mechanism. Platforms that can find all
-+ * serial ports via mechanisms like ACPI or PCI need not supply it.
-+ */
-+#ifndef SERIAL_PORT_DFNS
-+#define SERIAL_PORT_DFNS
-+#endif
-+
-+static const struct old_serial_port old_serial_port[] = {
-+ SERIAL_PORT_DFNS /* defined in asm/serial.h */
-+};
-+
-+#define UART_NR CONFIG_SERIAL_8250_NR_UARTS
-+
-+#ifdef CONFIG_SERIAL_8250_RSA
-+
-+#define PORT_RSA_MAX 4
-+static unsigned long probe_rsa[PORT_RSA_MAX];
-+static unsigned int probe_rsa_count;
-+#endif /* CONFIG_SERIAL_8250_RSA */
-+
-+struct uart_8250_port {
-+ struct uart_port port;
-+ struct timer_list timer; /* "no irq" timer */
-+ struct list_head list; /* ports on this IRQ */
-+ unsigned short capabilities; /* port capabilities */
-+ unsigned short bugs; /* port bugs */
-+ unsigned int tx_loadsz; /* transmit fifo load size */
-+ unsigned char acr;
-+ unsigned char ier;
-+ unsigned char lcr;
-+ unsigned char mcr;
-+ unsigned char mcr_mask; /* mask of user bits */
-+ unsigned char mcr_force; /* mask of forced bits */
-+ unsigned char lsr_break_flag;
-+
-+ /*
-+ * We provide a per-port pm hook.
-+ */
-+ void (*pm)(struct uart_port *port,
-+ unsigned int state, unsigned int old);
-+};
-+
-+struct irq_info {
-+ spinlock_t lock;
-+ struct list_head *head;
-+};
-+
-+static struct irq_info irq_lists[NR_IRQS];
-+
-+/*
-+ * Here we define the default xmit fifo size used for each type of UART.
-+ */
-+static const struct serial8250_config uart_config[] = {
-+ [PORT_UNKNOWN] = {
-+ .name = "unknown",
-+ .fifo_size = 1,
-+ .tx_loadsz = 1,
-+ },
-+ [PORT_8250] = {
-+ .name = "8250",
-+ .fifo_size = 1,
-+ .tx_loadsz = 1,
-+ },
-+ [PORT_16450] = {
-+ .name = "16450",
-+ .fifo_size = 1,
-+ .tx_loadsz = 1,
-+ },
-+ [PORT_16550] = {
-+ .name = "16550",
-+ .fifo_size = 1,
-+ .tx_loadsz = 1,
-+ },
-+ [PORT_16550A] = {
-+ .name = "16550A",
-+ .fifo_size = 16,
-+ .tx_loadsz = 16,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-+ .flags = UART_CAP_FIFO,
-+ },
-+ [PORT_CIRRUS] = {
-+ .name = "Cirrus",
-+ .fifo_size = 1,
-+ .tx_loadsz = 1,
-+ },
-+ [PORT_16650] = {
-+ .name = "ST16650",
-+ .fifo_size = 1,
-+ .tx_loadsz = 1,
-+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
-+ },
-+ [PORT_16650V2] = {
-+ .name = "ST16650V2",
-+ .fifo_size = 32,
-+ .tx_loadsz = 16,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
-+ UART_FCR_T_TRIG_00,
-+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
-+ },
-+ [PORT_16750] = {
-+ .name = "TI16750",
-+ .fifo_size = 64,
-+ .tx_loadsz = 64,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
-+ UART_FCR7_64BYTE,
-+ .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
-+ },
-+ [PORT_STARTECH] = {
-+ .name = "Startech",
-+ .fifo_size = 1,
-+ .tx_loadsz = 1,
-+ },
-+ [PORT_16C950] = {
-+ .name = "16C950/954",
-+ .fifo_size = 128,
-+ .tx_loadsz = 128,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-+ .flags = UART_CAP_FIFO,
-+ },
-+ [PORT_16654] = {
-+ .name = "ST16654",
-+ .fifo_size = 64,
-+ .tx_loadsz = 32,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
-+ UART_FCR_T_TRIG_10,
-+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
-+ },
-+ [PORT_16850] = {
-+ .name = "XR16850",
-+ .fifo_size = 128,
-+ .tx_loadsz = 128,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
-+ },
-+ [PORT_RSA] = {
-+ .name = "RSA",
-+ .fifo_size = 2048,
-+ .tx_loadsz = 2048,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
-+ .flags = UART_CAP_FIFO,
-+ },
-+ [PORT_NS16550A] = {
-+ .name = "NS16550A",
-+ .fifo_size = 16,
-+ .tx_loadsz = 16,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-+ .flags = UART_CAP_FIFO | UART_NATSEMI,
-+ },
-+ [PORT_XSCALE] = {
-+ .name = "XScale",
-+ .fifo_size = 32,
-+ .tx_loadsz = 32,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-+ .flags = UART_CAP_FIFO | UART_CAP_UUE,
-+ },
-+};
-+
-+#ifdef CONFIG_SERIAL_8250_AU1X00
-+
-+/* Au1x00 UART hardware has a weird register layout */
-+static const u8 au_io_in_map[] = {
-+ [UART_RX] = 0,
-+ [UART_IER] = 2,
-+ [UART_IIR] = 3,
-+ [UART_LCR] = 5,
-+ [UART_MCR] = 6,
-+ [UART_LSR] = 7,
-+ [UART_MSR] = 8,
-+};
-+
-+static const u8 au_io_out_map[] = {
-+ [UART_TX] = 1,
-+ [UART_IER] = 2,
-+ [UART_FCR] = 4,
-+ [UART_LCR] = 5,
-+ [UART_MCR] = 6,
-+};
-+
-+/* sane hardware needs no mapping */
-+static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
-+{
-+ if (up->port.iotype != UPIO_AU)
-+ return offset;
-+ return au_io_in_map[offset];
-+}
-+
-+static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
-+{
-+ if (up->port.iotype != UPIO_AU)
-+ return offset;
-+ return au_io_out_map[offset];
-+}
-+
-+#else
-+
-+/* sane hardware needs no mapping */
-+#define map_8250_in_reg(up, offset) (offset)
-+#define map_8250_out_reg(up, offset) (offset)
-+
-+#endif
-+
-+static unsigned int serial_in(struct uart_8250_port *up, int offset)
-+{
-+ unsigned int tmp;
-+ offset = map_8250_in_reg(up, offset) << up->port.regshift;
-+
-+ switch (up->port.iotype) {
-+ case UPIO_HUB6:
-+ outb(up->port.hub6 - 1 + offset, up->port.iobase);
-+ return inb(up->port.iobase + 1);
-+
-+ case UPIO_MEM:
-+ return readb(up->port.membase + offset);
-+
-+ case UPIO_MEM32:
-+ return readl(up->port.membase + offset);
-+
-+#ifdef CONFIG_SERIAL_8250_AU1X00
-+ case UPIO_AU:
-+ return __raw_readl(up->port.membase + offset);
-+#endif
-+
-+ case UPIO_TSI:
-+ if (offset == UART_IIR) {
-+ tmp = readl(up->port.membase + (UART_IIR & ~3));
-+ return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
-+ } else
-+ return readb(up->port.membase + offset);
-+
-+ default:
-+ return inb(up->port.iobase + offset);
-+ }
-+}
-+
-+static void
-+serial_out(struct uart_8250_port *up, int offset, int value)
-+{
-+ offset = map_8250_out_reg(up, offset) << up->port.regshift;
-+
-+ switch (up->port.iotype) {
-+ case UPIO_HUB6:
-+ outb(up->port.hub6 - 1 + offset, up->port.iobase);
-+ outb(value, up->port.iobase + 1);
-+ break;
-+
-+ case UPIO_MEM:
-+ writeb(value, up->port.membase + offset);
-+ break;
-+
-+ case UPIO_MEM32:
-+ writel(value, up->port.membase + offset);
-+ break;
-+
-+#ifdef CONFIG_SERIAL_8250_AU1X00
-+ case UPIO_AU:
-+ __raw_writel(value, up->port.membase + offset);
-+ break;
-+#endif
-+ case UPIO_TSI:
-+ if (!((offset == UART_IER) && (value & UART_IER_UUE)))
-+ writeb(value, up->port.membase + offset);
-+ break;
-+
-+ default:
-+ outb(value, up->port.iobase + offset);
-+ }
-+}
-+
-+static void
-+serial_out_sync(struct uart_8250_port *up, int offset, int value)
-+{
-+ switch (up->port.iotype) {
-+ case UPIO_MEM:
-+ case UPIO_MEM32:
-+#ifdef CONFIG_SERIAL_8250_AU1X00
-+ case UPIO_AU:
-+#endif
-+ serial_out(up, offset, value);
-+ serial_in(up, UART_LCR); /* safe, no side-effects */
-+ break;
-+ default:
-+ serial_out(up, offset, value);
-+ }
-+}
-+
-+/*
-+ * We used to support using pause I/O for certain machines. We
-+ * haven't supported this for a while, but just in case it's badly
-+ * needed for certain old 386 machines, I've left these #define's
-+ * in....
-+ */
-+#define serial_inp(up, offset) serial_in(up, offset)
-+#define serial_outp(up, offset, value) serial_out(up, offset, value)
-+
-+/* Uart divisor latch read */
-+static inline int _serial_dl_read(struct uart_8250_port *up)
-+{
-+ return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
-+}
-+
-+/* Uart divisor latch write */
-+static inline void _serial_dl_write(struct uart_8250_port *up, int value)
-+{
-+ serial_outp(up, UART_DLL, value & 0xff);
-+ serial_outp(up, UART_DLM, value >> 8 & 0xff);
-+}
-+
-+#ifdef CONFIG_SERIAL_8250_AU1X00
-+/* Au1x00 haven't got a standard divisor latch */
-+static int serial_dl_read(struct uart_8250_port *up)
-+{
-+ if (up->port.iotype == UPIO_AU)
-+ return __raw_readl(up->port.membase + 0x28);
-+ else
-+ return _serial_dl_read(up);
-+}
-+
-+static void serial_dl_write(struct uart_8250_port *up, int value)
-+{
-+ if (up->port.iotype == UPIO_AU)
-+ __raw_writel(value, up->port.membase + 0x28);
-+ else
-+ _serial_dl_write(up, value);
-+}
-+#else
-+#define serial_dl_read(up) _serial_dl_read(up)
-+#define serial_dl_write(up, value) _serial_dl_write(up, value)
-+#endif
-+
-+/*
-+ * For the 16C950
-+ */
-+static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
-+{
-+ serial_out(up, UART_SCR, offset);
-+ serial_out(up, UART_ICR, value);
-+}
-+
-+static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
-+{
-+ unsigned int value;
-+
-+ serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
-+ serial_out(up, UART_SCR, offset);
-+ value = serial_in(up, UART_ICR);
-+ serial_icr_write(up, UART_ACR, up->acr);
-+
-+ return value;
-+}
-+
-+/*
-+ * FIFO support.
-+ */
-+static inline void serial8250_clear_fifos(struct uart_8250_port *p)
-+{
-+ if (p->capabilities & UART_CAP_FIFO) {
-+ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
-+ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO |
-+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
-+ serial_outp(p, UART_FCR, 0);
-+ }
-+}
-+
-+/*
-+ * IER sleep support. UARTs which have EFRs need the "extended
-+ * capability" bit enabled. Note that on XR16C850s, we need to
-+ * reset LCR to write to IER.
-+ */
-+static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
-+{
-+ if (p->capabilities & UART_CAP_SLEEP) {
-+ if (p->capabilities & UART_CAP_EFR) {
-+ serial_outp(p, UART_LCR, 0xBF);
-+ serial_outp(p, UART_EFR, UART_EFR_ECB);
-+ serial_outp(p, UART_LCR, 0);
-+ }
-+ serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
-+ if (p->capabilities & UART_CAP_EFR) {
-+ serial_outp(p, UART_LCR, 0xBF);
-+ serial_outp(p, UART_EFR, 0);
-+ serial_outp(p, UART_LCR, 0);
-+ }
-+ }
-+}
-+
-+#ifdef CONFIG_SERIAL_8250_RSA
-+/*
-+ * Attempts to turn on the RSA FIFO. Returns zero on failure.
-+ * We set the port uart clock rate if we succeed.
-+ */
-+static int __enable_rsa(struct uart_8250_port *up)
-+{
-+ unsigned char mode;
-+ int result;
-+
-+ mode = serial_inp(up, UART_RSA_MSR);
-+ result = mode & UART_RSA_MSR_FIFO;
-+
-+ if (!result) {
-+ serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
-+ mode = serial_inp(up, UART_RSA_MSR);
-+ result = mode & UART_RSA_MSR_FIFO;
-+ }
-+
-+ if (result)
-+ up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
-+
-+ return result;
-+}
-+
-+static void enable_rsa(struct uart_8250_port *up)
-+{
-+ if (up->port.type == PORT_RSA) {
-+ if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
-+ spin_lock_irq(&up->port.lock);
-+ __enable_rsa(up);
-+ spin_unlock_irq(&up->port.lock);
-+ }
-+ if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
-+ serial_outp(up, UART_RSA_FRR, 0);
-+ }
-+}
-+
-+/*
-+ * Attempts to turn off the RSA FIFO. Returns zero on failure.
-+ * It is unknown why interrupts were disabled in here. However,
-+ * the caller is expected to preserve this behaviour by grabbing
-+ * the spinlock before calling this function.
-+ */
-+static void disable_rsa(struct uart_8250_port *up)
-+{
-+ unsigned char mode;
-+ int result;
-+
-+ if (up->port.type == PORT_RSA &&
-+ up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
-+ spin_lock_irq(&up->port.lock);
-+
-+ mode = serial_inp(up, UART_RSA_MSR);
-+ result = !(mode & UART_RSA_MSR_FIFO);
-+
-+ if (!result) {
-+ serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
-+ mode = serial_inp(up, UART_RSA_MSR);
-+ result = !(mode & UART_RSA_MSR_FIFO);
-+ }
-+
-+ if (result)
-+ up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
-+ spin_unlock_irq(&up->port.lock);
-+ }
-+}
-+#endif /* CONFIG_SERIAL_8250_RSA */
-+
-+/*
-+ * This is a quickie test to see how big the FIFO is.
-+ * It doesn't work at all the time, more's the pity.
-+ */
-+static int size_fifo(struct uart_8250_port *up)
-+{
-+ unsigned char old_fcr, old_mcr, old_lcr;
-+ unsigned short old_dl;
-+ int count;
-+
-+ old_lcr = serial_inp(up, UART_LCR);
-+ serial_outp(up, UART_LCR, 0);
-+ old_fcr = serial_inp(up, UART_FCR);
-+ old_mcr = serial_inp(up, UART_MCR);
-+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
-+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
-+ serial_outp(up, UART_MCR, UART_MCR_LOOP);
-+ serial_outp(up, UART_LCR, UART_LCR_DLAB);
-+ old_dl = serial_dl_read(up);
-+ serial_dl_write(up, 0x0001);
-+ serial_outp(up, UART_LCR, 0x03);
-+ for (count = 0; count < 256; count++)
-+ serial_outp(up, UART_TX, count);
-+ mdelay(20);/* FIXME - schedule_timeout */
-+ for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) &&
-+ (count < 256); count++)
-+ serial_inp(up, UART_RX);
-+ serial_outp(up, UART_FCR, old_fcr);
-+ serial_outp(up, UART_MCR, old_mcr);
-+ serial_outp(up, UART_LCR, UART_LCR_DLAB);
-+ serial_dl_write(up, old_dl);
-+ serial_outp(up, UART_LCR, old_lcr);
-+
-+ return count;
-+}
-+
-+/*
-+ * Read UART ID using the divisor method - set DLL and DLM to zero
-+ * and the revision will be in DLL and device type in DLM. We
-+ * preserve the device state across this.
-+ */
-+static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
-+{
-+ unsigned char old_dll, old_dlm, old_lcr;
-+ unsigned int id;
-+
-+ old_lcr = serial_inp(p, UART_LCR);
-+ serial_outp(p, UART_LCR, UART_LCR_DLAB);
-+
-+ old_dll = serial_inp(p, UART_DLL);
-+ old_dlm = serial_inp(p, UART_DLM);
-+
-+ serial_outp(p, UART_DLL, 0);
-+ serial_outp(p, UART_DLM, 0);
-+
-+ id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
-+
-+ serial_outp(p, UART_DLL, old_dll);
-+ serial_outp(p, UART_DLM, old_dlm);
-+ serial_outp(p, UART_LCR, old_lcr);
-+
-+ return id;
-+}
-+
-+/*
-+ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
-+ * When this function is called we know it is at least a StarTech
-+ * 16650 V2, but it might be one of several StarTech UARTs, or one of
-+ * its clones. (We treat the broken original StarTech 16650 V1 as a
-+ * 16550, and why not? Startech doesn't seem to even acknowledge its
-+ * existence.)
-+ *
-+ * What evil have men's minds wrought...
-+ */
-+static void autoconfig_has_efr(struct uart_8250_port *up)
-+{
-+ unsigned int id1, id2, id3, rev;
-+
-+ /*
-+ * Everything with an EFR has SLEEP
-+ */
-+ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
-+
-+ /*
-+ * First we check to see if it's an Oxford Semiconductor UART.
-+ *
-+ * If we have to do this here because some non-National
-+ * Semiconductor clone chips lock up if you try writing to the
-+ * LSR register (which serial_icr_read does)
-+ */
-+
-+ /*
-+ * Check for Oxford Semiconductor 16C950.
-+ *
-+ * EFR [4] must be set else this test fails.
-+ *
-+ * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
-+ * claims that it's needed for 952 dual UART's (which are not
-+ * recommended for new designs).
-+ */
-+ up->acr = 0;
-+ serial_out(up, UART_LCR, 0xBF);
-+ serial_out(up, UART_EFR, UART_EFR_ECB);
-+ serial_out(up, UART_LCR, 0x00);
-+ id1 = serial_icr_read(up, UART_ID1);
-+ id2 = serial_icr_read(up, UART_ID2);
-+ id3 = serial_icr_read(up, UART_ID3);
-+ rev = serial_icr_read(up, UART_REV);
-+
-+ DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
-+
-+ if (id1 == 0x16 && id2 == 0xC9 &&
-+ (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
-+ up->port.type = PORT_16C950;
-+
-+ /*
-+ * Enable work around for the Oxford Semiconductor 952 rev B
-+ * chip which causes it to seriously miscalculate baud rates
-+ * when DLL is 0.
-+ */
-+ if (id3 == 0x52 && rev == 0x01)
-+ up->bugs |= UART_BUG_QUOT;
-+ return;
-+ }
-+
-+ /*
-+ * We check for a XR16C850 by setting DLL and DLM to 0, and then
-+ * reading back DLL and DLM. The chip type depends on the DLM
-+ * value read back:
-+ * 0x10 - XR16C850 and the DLL contains the chip revision.
-+ * 0x12 - XR16C2850.
-+ * 0x14 - XR16C854.
-+ */
-+ id1 = autoconfig_read_divisor_id(up);
-+ DEBUG_AUTOCONF("850id=%04x ", id1);
-+
-+ id2 = id1 >> 8;
-+ if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
-+ up->port.type = PORT_16850;
-+ return;
-+ }
-+
-+ /*
-+ * It wasn't an XR16C850.
-+ *
-+ * We distinguish between the '654 and the '650 by counting
-+ * how many bytes are in the FIFO. I'm using this for now,
-+ * since that's the technique that was sent to me in the
-+ * serial driver update, but I'm not convinced this works.
-+ * I've had problems doing this in the past. -TYT
-+ */
-+ if (size_fifo(up) == 64)
-+ up->port.type = PORT_16654;
-+ else
-+ up->port.type = PORT_16650V2;
-+}
-+
-+/*
-+ * We detected a chip without a FIFO. Only two fall into
-+ * this category - the original 8250 and the 16450. The
-+ * 16450 has a scratch register (accessible with LCR=0)
-+ */
-+static void autoconfig_8250(struct uart_8250_port *up)
-+{
-+ unsigned char scratch, status1, status2;
-+
-+ up->port.type = PORT_8250;
-+
-+ scratch = serial_in(up, UART_SCR);
-+ serial_outp(up, UART_SCR, 0xa5);
-+ status1 = serial_in(up, UART_SCR);
-+ serial_outp(up, UART_SCR, 0x5a);
-+ status2 = serial_in(up, UART_SCR);
-+ serial_outp(up, UART_SCR, scratch);
-+
-+ if (status1 == 0xa5 && status2 == 0x5a)
-+ up->port.type = PORT_16450;
-+}
-+
-+static int broken_efr(struct uart_8250_port *up)
-+{
-+ /*
-+ * Exar ST16C2550 "A2" devices incorrectly detect as
-+ * having an EFR, and report an ID of 0x0201. See
-+ * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
-+ */
-+ if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+/*
-+ * We know that the chip has FIFOs. Does it have an EFR? The
-+ * EFR is located in the same register position as the IIR and
-+ * we know the top two bits of the IIR are currently set. The
-+ * EFR should contain zero. Try to read the EFR.
-+ */
-+static void autoconfig_16550a(struct uart_8250_port *up)
-+{
-+ unsigned char status1, status2;
-+ unsigned int iersave;
-+
-+ up->port.type = PORT_16550A;
-+ up->capabilities |= UART_CAP_FIFO;
-+
-+ /*
-+ * Check for presence of the EFR when DLAB is set.
-+ * Only ST16C650V1 UARTs pass this test.
-+ */
-+ serial_outp(up, UART_LCR, UART_LCR_DLAB);
-+ if (serial_in(up, UART_EFR) == 0) {
-+ serial_outp(up, UART_EFR, 0xA8);
-+ if (serial_in(up, UART_EFR) != 0) {
-+ DEBUG_AUTOCONF("EFRv1 ");
-+ up->port.type = PORT_16650;
-+ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
-+ } else {
-+ DEBUG_AUTOCONF("Motorola 8xxx DUART ");
-+ }
-+ serial_outp(up, UART_EFR, 0);
-+ return;
-+ }
-+
-+ /*
-+ * Maybe it requires 0xbf to be written to the LCR.
-+ * (other ST16C650V2 UARTs, TI16C752A, etc)
-+ */
-+ serial_outp(up, UART_LCR, 0xBF);
-+ if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
-+ DEBUG_AUTOCONF("EFRv2 ");
-+ autoconfig_has_efr(up);
-+ return;
-+ }
-+
-+ /*
-+ * Check for a National Semiconductor SuperIO chip.
-+ * Attempt to switch to bank 2, read the value of the LOOP bit
-+ * from EXCR1. Switch back to bank 0, change it in MCR. Then
-+ * switch back to bank 2, read it from EXCR1 again and check
-+ * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
-+ */
-+ serial_outp(up, UART_LCR, 0);
-+ status1 = serial_in(up, UART_MCR);
-+ serial_outp(up, UART_LCR, 0xE0);
-+ status2 = serial_in(up, 0x02); /* EXCR1 */
-+
-+ if (!((status2 ^ status1) & UART_MCR_LOOP)) {
-+ serial_outp(up, UART_LCR, 0);
-+ serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP);
-+ serial_outp(up, UART_LCR, 0xE0);
-+ status2 = serial_in(up, 0x02); /* EXCR1 */
-+ serial_outp(up, UART_LCR, 0);
-+ serial_outp(up, UART_MCR, status1);
-+
-+ if ((status2 ^ status1) & UART_MCR_LOOP) {
-+ unsigned short quot;
-+
-+ serial_outp(up, UART_LCR, 0xE0);
-+
-+ quot = serial_dl_read(up);
-+ quot <<= 3;
-+
-+ status1 = serial_in(up, 0x04); /* EXCR1 */
-+ status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-+ status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
-+ serial_outp(up, 0x04, status1);
-+
-+ serial_dl_write(up, quot);
-+
-+ serial_outp(up, UART_LCR, 0);
-+
-+ up->port.uartclk = 921600*16;
-+ up->port.type = PORT_NS16550A;
-+ up->capabilities |= UART_NATSEMI;
-+ return;
-+ }
-+ }
-+
-+ /*
-+ * No EFR. Try to detect a TI16750, which only sets bit 5 of
-+ * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
-+ * Try setting it with and without DLAB set. Cheap clones
-+ * set bit 5 without DLAB set.
-+ */
-+ serial_outp(up, UART_LCR, 0);
-+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
-+ status1 = serial_in(up, UART_IIR) >> 5;
-+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-+ serial_outp(up, UART_LCR, UART_LCR_DLAB);
-+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
-+ status2 = serial_in(up, UART_IIR) >> 5;
-+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-+ serial_outp(up, UART_LCR, 0);
-+
-+ DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
-+
-+ if (status1 == 6 && status2 == 7) {
-+ up->port.type = PORT_16750;
-+ up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
-+ return;
-+ }
-+
-+ /*
-+ * Try writing and reading the UART_IER_UUE bit (b6).
-+ * If it works, this is probably one of the Xscale platform's
-+ * internal UARTs.
-+ * We're going to explicitly set the UUE bit to 0 before
-+ * trying to write and read a 1 just to make sure it's not
-+ * already a 1 and maybe locked there before we even start start.
-+ */
-+ iersave = serial_in(up, UART_IER);
-+ serial_outp(up, UART_IER, iersave & ~UART_IER_UUE);
-+ if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
-+ /*
-+ * OK it's in a known zero state, try writing and reading
-+ * without disturbing the current state of the other bits.
-+ */
-+ serial_outp(up, UART_IER, iersave | UART_IER_UUE);
-+ if (serial_in(up, UART_IER) & UART_IER_UUE) {
-+ /*
-+ * It's an Xscale.
-+ * We'll leave the UART_IER_UUE bit set to 1 (enabled).
-+ */
-+ DEBUG_AUTOCONF("Xscale ");
-+ up->port.type = PORT_XSCALE;
-+ up->capabilities |= UART_CAP_UUE;
-+ return;
-+ }
-+ } else {
-+ /*
-+ * If we got here we couldn't force the IER_UUE bit to 0.
-+ * Log it and continue.
-+ */
-+ DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
-+ }
-+ serial_outp(up, UART_IER, iersave);
-+}
-+
-+/*
-+ * This routine is called by rs_init() to initialize a specific serial
-+ * port. It determines what type of UART chip this serial port is
-+ * using: 8250, 16450, 16550, 16550A. The important question is
-+ * whether or not this UART is a 16550A or not, since this will
-+ * determine whether or not we can use its FIFO features or not.
-+ */
-+static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
-+{
-+ unsigned char status1, scratch, scratch2, scratch3;
-+ unsigned char save_lcr, save_mcr;
-+ unsigned long flags;
-+
-+ if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
-+ return;
-+
-+ DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
-+ up->port.line, up->port.iobase, up->port.membase);
-+
-+ /*
-+ * We really do need global IRQs disabled here - we're going to
-+ * be frobbing the chips IRQ enable register to see if it exists.
-+ */
-+ spin_lock_irqsave(&up->port.lock, flags);
-+// save_flags(flags); cli();
-+
-+ up->capabilities = 0;
-+ up->bugs = 0;
-+
-+ if (!(up->port.flags & UPF_BUGGY_UART)) {
-+ /*
-+ * Do a simple existence test first; if we fail this,
-+ * there's no point trying anything else.
-+ *
-+ * 0x80 is used as a nonsense port to prevent against
-+ * false positives due to ISA bus float. The
-+ * assumption is that 0x80 is a non-existent port;
-+ * which should be safe since include/asm/io.h also
-+ * makes this assumption.
-+ *
-+ * Note: this is safe as long as MCR bit 4 is clear
-+ * and the device is in "PC" mode.
-+ */
-+ scratch = serial_inp(up, UART_IER);
-+ serial_outp(up, UART_IER, 0);
-+#ifdef __i386__
-+ outb(0xff, 0x080);
-+#endif
-+ /*
-+ * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
-+ * 16C754B) allow only to modify them if an EFR bit is set.
-+ */
-+ scratch2 = serial_inp(up, UART_IER) & 0x0f;
-+ serial_outp(up, UART_IER, 0x0F);
-+#ifdef __i386__
-+ outb(0, 0x080);
-+#endif
-+ scratch3 = serial_inp(up, UART_IER) & 0x0f;
-+ serial_outp(up, UART_IER, scratch);
-+ if (scratch2 != 0 || scratch3 != 0x0F) {
-+ /*
-+ * We failed; there's nothing here
-+ */
-+ DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
-+ scratch2, scratch3);
-+ goto out;
-+ }
-+ }
-+
-+ save_mcr = serial_in(up, UART_MCR);
-+ save_lcr = serial_in(up, UART_LCR);
-+
-+ /*
-+ * Check to see if a UART is really there. Certain broken
-+ * internal modems based on the Rockwell chipset fail this
-+ * test, because they apparently don't implement the loopback
-+ * test mode. So this test is skipped on the COM 1 through
-+ * COM 4 ports. This *should* be safe, since no board
-+ * manufacturer would be stupid enough to design a board
-+ * that conflicts with COM 1-4 --- we hope!
-+ */
-+ if (!(up->port.flags & UPF_SKIP_TEST)) {
-+ serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
-+ status1 = serial_inp(up, UART_MSR) & 0xF0;
-+ serial_outp(up, UART_MCR, save_mcr);
-+ if (status1 != 0x90) {
-+ DEBUG_AUTOCONF("LOOP test failed (%02x) ",
-+ status1);
-+ goto out;
-+ }
-+ }
-+
-+ /*
-+ * We're pretty sure there's a port here. Lets find out what
-+ * type of port it is. The IIR top two bits allows us to find
-+ * out if it's 8250 or 16450, 16550, 16550A or later. This
-+ * determines what we test for next.
-+ *
-+ * We also initialise the EFR (if any) to zero for later. The
-+ * EFR occupies the same register location as the FCR and IIR.
-+ */
-+ serial_outp(up, UART_LCR, 0xBF);
-+ serial_outp(up, UART_EFR, 0);
-+ serial_outp(up, UART_LCR, 0);
-+
-+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-+ scratch = serial_in(up, UART_IIR) >> 6;
-+
-+ DEBUG_AUTOCONF("iir=%d ", scratch);
-+
-+ switch (scratch) {
-+ case 0:
-+ autoconfig_8250(up);
-+ break;
-+ case 1:
-+ up->port.type = PORT_UNKNOWN;
-+ break;
-+ case 2:
-+ up->port.type = PORT_16550;
-+ break;
-+ case 3:
-+ autoconfig_16550a(up);
-+ break;
-+ }
-+
-+#ifdef CONFIG_SERIAL_8250_RSA
-+ /*
-+ * Only probe for RSA ports if we got the region.
-+ */
-+ if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) {
-+ int i;
-+
-+ for (i = 0 ; i < probe_rsa_count; ++i) {
-+ if (probe_rsa[i] == up->port.iobase &&
-+ __enable_rsa(up)) {
-+ up->port.type = PORT_RSA;
-+ break;
-+ }
-+ }
-+ }
-+#endif
-+
-+#ifdef CONFIG_SERIAL_8250_AU1X00
-+ /* if access method is AU, it is a 16550 with a quirk */
-+ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
-+ up->bugs |= UART_BUG_NOMSR;
-+#endif
-+
-+ serial_outp(up, UART_LCR, save_lcr);
-+
-+ if (up->capabilities != uart_config[up->port.type].flags) {
-+ printk(KERN_WARNING
-+ "ttyS%d: detected caps %08x should be %08x\n",
-+ up->port.line, up->capabilities,
-+ uart_config[up->port.type].flags);
-+ }
-+
-+ up->port.fifosize = uart_config[up->port.type].fifo_size;
-+ up->capabilities = uart_config[up->port.type].flags;
-+ up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
-+
-+ if (up->port.type == PORT_UNKNOWN)
-+ goto out;
-+
-+ /*
-+ * Reset the UART.
-+ */
-+#ifdef CONFIG_SERIAL_8250_RSA
-+ if (up->port.type == PORT_RSA)
-+ serial_outp(up, UART_RSA_FRR, 0);
-+#endif
-+ serial_outp(up, UART_MCR, save_mcr);
-+ serial8250_clear_fifos(up);
-+ serial_in(up, UART_RX);
-+ if (up->capabilities & UART_CAP_UUE)
-+ serial_outp(up, UART_IER, UART_IER_UUE);
-+ else
-+ serial_outp(up, UART_IER, 0);
-+
-+ out:
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+// restore_flags(flags);
-+ DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
-+}
-+
-+static void autoconfig_irq(struct uart_8250_port *up)
-+{
-+ unsigned char save_mcr, save_ier;
-+ unsigned char save_ICP = 0;
-+ unsigned int ICP = 0;
-+ unsigned long irqs;
-+ int irq;
-+
-+ if (up->port.flags & UPF_FOURPORT) {
-+ ICP = (up->port.iobase & 0xfe0) | 0x1f;
-+ save_ICP = inb_p(ICP);
-+ outb_p(0x80, ICP);
-+ (void) inb_p(ICP);
-+ }
-+
-+ /* forget possible initially masked and pending IRQ */
-+ probe_irq_off(probe_irq_on());
-+ save_mcr = serial_inp(up, UART_MCR);
-+ save_ier = serial_inp(up, UART_IER);
-+ serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
-+
-+ irqs = probe_irq_on();
-+ serial_outp(up, UART_MCR, 0);
-+ udelay (10);
-+ if (up->port.flags & UPF_FOURPORT) {
-+ serial_outp(up, UART_MCR,
-+ UART_MCR_DTR | UART_MCR_RTS);
-+ } else {
-+ serial_outp(up, UART_MCR,
-+ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
-+ }
-+ serial_outp(up, UART_IER, 0x0f); /* enable all intrs */
-+ (void)serial_inp(up, UART_LSR);
-+ (void)serial_inp(up, UART_RX);
-+ (void)serial_inp(up, UART_IIR);
-+ (void)serial_inp(up, UART_MSR);
-+ serial_outp(up, UART_TX, 0xFF);
-+ udelay (20);
-+ irq = probe_irq_off(irqs);
-+
-+ serial_outp(up, UART_MCR, save_mcr);
-+ serial_outp(up, UART_IER, save_ier);
-+
-+ if (up->port.flags & UPF_FOURPORT)
-+ outb_p(save_ICP, ICP);
-+
-+ up->port.irq = (irq > 0) ? irq : 0;
-+}
-+
-+static inline void __stop_tx(struct uart_8250_port *p)
-+{
-+ if (p->ier & UART_IER_THRI) {
-+ p->ier &= ~UART_IER_THRI;
-+ serial_out(p, UART_IER, p->ier);
-+ }
-+}
-+
-+static void serial8250_stop_tx(struct uart_port *port)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+
-+ __stop_tx(up);
-+
-+ /*
-+ * We really want to stop the transmitter from sending.
-+ */
-+ if (up->port.type == PORT_16C950) {
-+ up->acr |= UART_ACR_TXDIS;
-+ serial_icr_write(up, UART_ACR, up->acr);
-+ }
-+}
-+
-+static void transmit_chars(struct uart_8250_port *up);
-+
-+static void serial8250_start_tx(struct uart_port *port)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+
-+ if (!(up->ier & UART_IER_THRI)) {
-+ up->ier |= UART_IER_THRI;
-+ serial_out(up, UART_IER, up->ier);
-+
-+ if (up->bugs & UART_BUG_TXEN) {
-+ unsigned char lsr, iir;
-+ lsr = serial_in(up, UART_LSR);
-+ iir = serial_in(up, UART_IIR);
-+ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)
-+ transmit_chars(up);
-+ }
-+ }
-+
-+ /*
-+ * Re-enable the transmitter if we disabled it.
-+ */
-+ if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
-+ up->acr &= ~UART_ACR_TXDIS;
-+ serial_icr_write(up, UART_ACR, up->acr);
-+ }
-+}
-+
-+static void serial8250_stop_rx(struct uart_port *port)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+
-+ up->ier &= ~UART_IER_RLSI;
-+ up->port.read_status_mask &= ~UART_LSR_DR;
-+ serial_out(up, UART_IER, up->ier);
-+}
-+
-+static void serial8250_enable_ms(struct uart_port *port)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+
-+ /* no MSR capabilities */
-+ if (up->bugs & UART_BUG_NOMSR)
-+ return;
-+
-+ up->ier |= UART_IER_MSI;
-+ serial_out(up, UART_IER, up->ier);
-+}
-+
-+static void
-+receive_chars(struct uart_8250_port *up, unsigned int *status)
-+{
-+ struct tty_struct *tty = up->port.info->tty;
-+ unsigned char ch, lsr = *status;
-+ int max_count = 256;
-+ char flag;
-+
-+ do {
-+ ch = serial_inp(up, UART_RX);
-+ flag = TTY_NORMAL;
-+ up->port.icount.rx++;
-+
-+#ifdef CONFIG_SERIAL_8250_CONSOLE
-+ /*
-+ * Recover the break flag from console xmit
-+ */
-+ if (up->port.line == up->port.cons->index) {
-+ lsr |= up->lsr_break_flag;
-+ up->lsr_break_flag = 0;
-+ }
-+#endif
-+
-+ if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
-+ UART_LSR_FE | UART_LSR_OE))) {
-+ /*
-+ * For statistics only
-+ */
-+ if (lsr & UART_LSR_BI) {
-+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
-+ up->port.icount.brk++;
-+ /*
-+ * We do the SysRQ and SAK checking
-+ * here because otherwise the break
-+ * may get masked by ignore_status_mask
-+ * or read_status_mask.
-+ */
-+ if (uart_handle_break(&up->port))
-+ goto ignore_char;
-+ } else if (lsr & UART_LSR_PE)
-+ up->port.icount.parity++;
-+ else if (lsr & UART_LSR_FE)
-+ up->port.icount.frame++;
-+ if (lsr & UART_LSR_OE)
-+ up->port.icount.overrun++;
-+
-+ /*
-+ * Mask off conditions which should be ignored.
-+ */
-+ lsr &= up->port.read_status_mask;
-+
-+ if (lsr & UART_LSR_BI) {
-+ DEBUG_INTR("handling break....");
-+ flag = TTY_BREAK;
-+ } else if (lsr & UART_LSR_PE)
-+ flag = TTY_PARITY;
-+ else if (lsr & UART_LSR_FE)
-+ flag = TTY_FRAME;
-+ }
-+ if (uart_handle_sysrq_char(&up->port, ch))
-+ goto ignore_char;
-+
-+ uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
-+
-+ ignore_char:
-+ lsr = serial_inp(up, UART_LSR);
-+ } while ((lsr & UART_LSR_DR) && (max_count-- > 0));
-+ spin_unlock(&up->port.lock);
-+ tty_flip_buffer_push(tty);
-+ spin_lock(&up->port.lock);
-+ *status = lsr;
-+}
-+
-+static void transmit_chars(struct uart_8250_port *up)
-+{
-+ struct circ_buf *xmit = &up->port.info->xmit;
-+ int count;
-+
-+ if (up->port.x_char) {
-+ serial_outp(up, UART_TX, up->port.x_char);
-+ up->port.icount.tx++;
-+ up->port.x_char = 0;
-+ return;
-+ }
-+ if (uart_tx_stopped(&up->port)) {
-+ serial8250_stop_tx(&up->port);
-+ return;
-+ }
-+ if (uart_circ_empty(xmit)) {
-+ __stop_tx(up);
-+ return;
-+ }
-+
-+ count = up->tx_loadsz;
-+ do {
-+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
-+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-+ up->port.icount.tx++;
-+ if (uart_circ_empty(xmit))
-+ break;
-+ } while (--count > 0);
-+
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(&up->port);
-+
-+ DEBUG_INTR("THRE...");
-+
-+ if (uart_circ_empty(xmit))
-+ __stop_tx(up);
-+}
-+
-+static unsigned int check_modem_status(struct uart_8250_port *up)
-+{
-+ unsigned int status = serial_in(up, UART_MSR);
-+
-+ if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
-+ up->port.info != NULL) {
-+ if (status & UART_MSR_TERI)
-+ up->port.icount.rng++;
-+ if (status & UART_MSR_DDSR)
-+ up->port.icount.dsr++;
-+ if (status & UART_MSR_DDCD)
-+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
-+ if (status & UART_MSR_DCTS)
-+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
-+
-+ wake_up_interruptible(&up->port.info->delta_msr_wait);
-+ }
-+
-+ return status;
-+}
-+
-+/*
-+ * This handles the interrupt from one port.
-+ */
-+static inline void
-+serial8250_handle_port(struct uart_8250_port *up)
-+{
-+ unsigned int status;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&up->port.lock, flags);
-+
-+ status = serial_inp(up, UART_LSR);
-+
-+ DEBUG_INTR("status = %x...", status);
-+
-+ if (status & UART_LSR_DR)
-+ receive_chars(up, &status);
-+ check_modem_status(up);
-+ if (status & UART_LSR_THRE)
-+ transmit_chars(up);
-+
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+}
-+
-+/*
-+ * This is the serial driver's interrupt routine.
-+ *
-+ * Arjan thinks the old way was overly complex, so it got simplified.
-+ * Alan disagrees, saying that need the complexity to handle the weird
-+ * nature of ISA shared interrupts. (This is a special exception.)
-+ *
-+ * In order to handle ISA shared interrupts properly, we need to check
-+ * that all ports have been serviced, and therefore the ISA interrupt
-+ * line has been de-asserted.
-+ *
-+ * This means we need to loop through all ports. checking that they
-+ * don't have an interrupt pending.
-+ */
-+static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
-+{
-+ struct irq_info *i = dev_id;
-+ struct list_head *l, *end = NULL;
-+ int pass_counter = 0, handled = 0;
-+
-+ DEBUG_INTR("serial8250_interrupt(%d)...", irq);
-+
-+ spin_lock(&i->lock);
-+
-+ l = i->head;
-+ do {
-+ struct uart_8250_port *up;
-+ unsigned int iir;
-+
-+ up = list_entry(l, struct uart_8250_port, list);
-+
-+ iir = serial_in(up, UART_IIR);
-+ if (!(iir & UART_IIR_NO_INT)) {
-+ serial8250_handle_port(up);
-+
-+ handled = 1;
-+
-+ end = NULL;
-+ } else if (end == NULL)
-+ end = l;
-+
-+ l = l->next;
-+
-+ if (l == i->head && pass_counter++ > PASS_LIMIT) {
-+ /* If we hit this, we're dead. */
-+ printk(KERN_ERR "serial8250: too much work for "
-+ "irq%d\n", irq);
-+ break;
-+ }
-+ } while (l != end);
-+
-+ spin_unlock(&i->lock);
-+
-+ DEBUG_INTR("end.\n");
-+
-+ return IRQ_RETVAL(handled);
-+}
-+
-+/*
-+ * To support ISA shared interrupts, we need to have one interrupt
-+ * handler that ensures that the IRQ line has been deasserted
-+ * before returning. Failing to do this will result in the IRQ
-+ * line being stuck active, and, since ISA irqs are edge triggered,
-+ * no more IRQs will be seen.
-+ */
-+static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
-+{
-+ spin_lock_irq(&i->lock);
-+
-+ if (!list_empty(i->head)) {
-+ if (i->head == &up->list)
-+ i->head = i->head->next;
-+ list_del(&up->list);
-+ } else {
-+ BUG_ON(i->head != &up->list);
-+ i->head = NULL;
-+ }
-+
-+ spin_unlock_irq(&i->lock);
-+}
-+
-+static int serial_link_irq_chain(struct uart_8250_port *up)
-+{
-+ struct irq_info *i = irq_lists + up->port.irq;
-+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
-+
-+ spin_lock_irq(&i->lock);
-+
-+ if (i->head) {
-+ list_add(&up->list, i->head);
-+ spin_unlock_irq(&i->lock);
-+
-+ ret = 0;
-+ } else {
-+ INIT_LIST_HEAD(&up->list);
-+ i->head = &up->list;
-+ spin_unlock_irq(&i->lock);
-+
-+ ret = request_irq(up->port.irq, serial8250_interrupt,
-+ irq_flags, "serial", i);
-+ if (ret < 0)
-+ serial_do_unlink(i, up);
-+ }
-+
-+ return ret;
-+}
-+
-+static void serial_unlink_irq_chain(struct uart_8250_port *up)
-+{
-+ struct irq_info *i = irq_lists + up->port.irq;
-+
-+ BUG_ON(i->head == NULL);
-+
-+ if (list_empty(i->head))
-+ free_irq(up->port.irq, i);
-+
-+ serial_do_unlink(i, up);
-+}
-+
-+/* Base timer interval for polling */
-+static inline int poll_timeout(int timeout)
-+{
-+ return timeout > 6 ? (timeout / 2 - 2) : 1;
-+}
-+
-+/*
-+ * This function is used to handle ports that do not have an
-+ * interrupt. This doesn't work very well for 16450's, but gives
-+ * barely passable results for a 16550A. (Although at the expense
-+ * of much CPU overhead).
-+ */
-+static void serial8250_timeout(unsigned long data)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)data;
-+ unsigned int iir;
-+
-+ iir = serial_in(up, UART_IIR);
-+ if (!(iir & UART_IIR_NO_INT))
-+ serial8250_handle_port(up);
-+ mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
-+}
-+
-+static void serial8250_backup_timeout(unsigned long data)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)data;
-+ unsigned int iir, ier = 0;
-+
-+ /*
-+ * Must disable interrupts or else we risk racing with the interrupt
-+ * based handler.
-+ */
-+ if (is_real_interrupt(up->port.irq)) {
-+ ier = serial_in(up, UART_IER);
-+ serial_out(up, UART_IER, 0);
-+ }
-+
-+ iir = serial_in(up, UART_IIR);
-+
-+ /*
-+ * This should be a safe test for anyone who doesn't trust the
-+ * IIR bits on their UART, but it's specifically designed for
-+ * the "Diva" UART used on the management processor on many HP
-+ * ia64 and parisc boxes.
-+ */
-+ if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
-+ (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) &&
-+ (serial_in(up, UART_LSR) & UART_LSR_THRE)) {
-+ iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
-+ iir |= UART_IIR_THRI;
-+ }
-+
-+ if (!(iir & UART_IIR_NO_INT))
-+ serial8250_handle_port(up);
-+
-+ if (is_real_interrupt(up->port.irq))
-+ serial_out(up, UART_IER, ier);
-+
-+ /* Standard timer interval plus 0.2s to keep the port running */
-+ mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout) + HZ/5);
-+}
-+
-+static unsigned int serial8250_tx_empty(struct uart_port *port)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+ unsigned long flags;
-+ unsigned int ret;
-+
-+ spin_lock_irqsave(&up->port.lock, flags);
-+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+
-+ return ret;
-+}
-+
-+static unsigned int serial8250_get_mctrl(struct uart_port *port)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+ unsigned int status;
-+ unsigned int ret;
-+
-+ status = check_modem_status(up);
-+
-+ ret = 0;
-+ if (status & UART_MSR_DCD)
-+ ret |= TIOCM_CAR;
-+ if (status & UART_MSR_RI)
-+ ret |= TIOCM_RNG;
-+ if (status & UART_MSR_DSR)
-+ ret |= TIOCM_DSR;
-+ if (status & UART_MSR_CTS)
-+ ret |= TIOCM_CTS;
-+ return ret;
-+}
-+
-+static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+ unsigned char mcr = 0;
-+
-+ if (mctrl & TIOCM_RTS)
-+ mcr |= UART_MCR_RTS;
-+ if (mctrl & TIOCM_DTR)
-+ mcr |= UART_MCR_DTR;
-+ if (mctrl & TIOCM_OUT1)
-+ mcr |= UART_MCR_OUT1;
-+ if (mctrl & TIOCM_OUT2)
-+ mcr |= UART_MCR_OUT2;
-+ if (mctrl & TIOCM_LOOP)
-+ mcr |= UART_MCR_LOOP;
-+
-+ mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
-+
-+ serial_out(up, UART_MCR, mcr);
-+}
-+
-+static void serial8250_break_ctl(struct uart_port *port, int break_state)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&up->port.lock, flags);
-+ if (break_state == -1)
-+ up->lcr |= UART_LCR_SBC;
-+ else
-+ up->lcr &= ~UART_LCR_SBC;
-+ serial_out(up, UART_LCR, up->lcr);
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+}
-+
-+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-+
-+/*
-+ * Wait for transmitter & holding register to empty
-+ */
-+static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
-+{
-+ unsigned int status, tmout = 10000;
-+
-+ /* Wait up to 10ms for the character(s) to be sent. */
-+ do {
-+ status = serial_in(up, UART_LSR);
-+
-+ if (status & UART_LSR_BI)
-+ up->lsr_break_flag = UART_LSR_BI;
-+
-+ if (--tmout == 0)
-+ break;
-+ udelay(1);
-+ } while ((status & bits) != bits);
-+
-+ /* Wait up to 1s for flow control if necessary */
-+ if (up->port.flags & UPF_CONS_FLOW) {
-+ tmout = 1000000;
-+ while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) {
-+ udelay(1);
-+ touch_nmi_watchdog();
-+ }
-+ }
-+}
-+
-+static int serial8250_startup(struct uart_port *port)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+ unsigned long flags;
-+ unsigned char lsr, iir;
-+ int retval;
-+
-+ up->capabilities = uart_config[up->port.type].flags;
-+ up->mcr = 0;
-+
-+ if (up->port.type == PORT_16C950) {
-+ /* Wake up and initialize UART */
-+ up->acr = 0;
-+ serial_outp(up, UART_LCR, 0xBF);
-+ serial_outp(up, UART_EFR, UART_EFR_ECB);
-+ serial_outp(up, UART_IER, 0);
-+ serial_outp(up, UART_LCR, 0);
-+ serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
-+ serial_outp(up, UART_LCR, 0xBF);
-+ serial_outp(up, UART_EFR, UART_EFR_ECB);
-+ serial_outp(up, UART_LCR, 0);
-+ }
-+
-+#ifdef CONFIG_SERIAL_8250_RSA
-+ /*
-+ * If this is an RSA port, see if we can kick it up to the
-+ * higher speed clock.
-+ */
-+ enable_rsa(up);
-+#endif
-+
-+ /*
-+ * Clear the FIFO buffers and disable them.
-+ * (they will be reenabled in set_termios())
-+ */
-+ serial8250_clear_fifos(up);
-+
-+ /*
-+ * Clear the interrupt registers.
-+ */
-+ (void) serial_inp(up, UART_LSR);
-+ (void) serial_inp(up, UART_RX);
-+ (void) serial_inp(up, UART_IIR);
-+ (void) serial_inp(up, UART_MSR);
-+
-+ /*
-+ * At this point, there's no way the LSR could still be 0xff;
-+ * if it is, then bail out, because there's likely no UART
-+ * here.
-+ */
-+ if (!(up->port.flags & UPF_BUGGY_UART) &&
-+ (serial_inp(up, UART_LSR) == 0xff)) {
-+ printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * For a XR16C850, we need to set the trigger levels
-+ */
-+ if (up->port.type == PORT_16850) {
-+ unsigned char fctr;
-+
-+ serial_outp(up, UART_LCR, 0xbf);
-+
-+ fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
-+ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX);
-+ serial_outp(up, UART_TRG, UART_TRG_96);
-+ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX);
-+ serial_outp(up, UART_TRG, UART_TRG_96);
-+
-+ serial_outp(up, UART_LCR, 0);
-+ }
-+
-+ if (is_real_interrupt(up->port.irq)) {
-+ /*
-+ * Test for UARTs that do not reassert THRE when the
-+ * transmitter is idle and the interrupt has already
-+ * been cleared. Real 16550s should always reassert
-+ * this interrupt whenever the transmitter is idle and
-+ * the interrupt is enabled. Delays are necessary to
-+ * allow register changes to become visible.
-+ */
-+ spin_lock_irqsave(&up->port.lock, flags);
-+
-+ wait_for_xmitr(up, UART_LSR_THRE);
-+ serial_out_sync(up, UART_IER, UART_IER_THRI);
-+ udelay(1); /* allow THRE to set */
-+ serial_in(up, UART_IIR);
-+ serial_out(up, UART_IER, 0);
-+ serial_out_sync(up, UART_IER, UART_IER_THRI);
-+ udelay(1); /* allow a working UART time to re-assert THRE */
-+ iir = serial_in(up, UART_IIR);
-+ serial_out(up, UART_IER, 0);
-+
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+
-+ /*
-+ * If the interrupt is not reasserted, setup a timer to
-+ * kick the UART on a regular basis.
-+ */
-+ if (iir & UART_IIR_NO_INT) {
-+ pr_debug("ttyS%d - using backup timer\n", port->line);
-+ up->timer.function = serial8250_backup_timeout;
-+ up->timer.data = (unsigned long)up;
-+ mod_timer(&up->timer, jiffies +
-+ poll_timeout(up->port.timeout) + HZ/5);
-+ }
-+ }
-+
-+ /*
-+ * If the "interrupt" for this port doesn't correspond with any
-+ * hardware interrupt, we use a timer-based system. The original
-+ * driver used to do this with IRQ0.
-+ */
-+ if (!is_real_interrupt(up->port.irq)) {
-+ up->timer.data = (unsigned long)up;
-+ mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
-+ } else {
-+ retval = serial_link_irq_chain(up);
-+ if (retval)
-+ return retval;
-+ }
-+
-+ /*
-+ * Now, initialize the UART
-+ */
-+ serial_outp(up, UART_LCR, UART_LCR_WLEN8);
-+
-+ spin_lock_irqsave(&up->port.lock, flags);
-+ if (up->port.flags & UPF_FOURPORT) {
-+ if (!is_real_interrupt(up->port.irq))
-+ up->port.mctrl |= TIOCM_OUT1;
-+ } else
-+ /*
-+ * Most PC uarts need OUT2 raised to enable interrupts.
-+ */
-+ if (is_real_interrupt(up->port.irq))
-+ up->port.mctrl |= TIOCM_OUT2;
-+
-+ serial8250_set_mctrl(&up->port, up->port.mctrl);
-+
-+ /*
-+ * Do a quick test to see if we receive an
-+ * interrupt when we enable the TX irq.
-+ */
-+ serial_outp(up, UART_IER, UART_IER_THRI);
-+ lsr = serial_in(up, UART_LSR);
-+ iir = serial_in(up, UART_IIR);
-+ serial_outp(up, UART_IER, 0);
-+
-+ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
-+ if (!(up->bugs & UART_BUG_TXEN)) {
-+ up->bugs |= UART_BUG_TXEN;
-+ pr_debug("ttyS%d - enabling bad tx status workarounds\n",
-+ port->line);
-+ }
-+ } else {
-+ up->bugs &= ~UART_BUG_TXEN;
-+ }
-+
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+
-+ /*
-+ * Finally, enable interrupts. Note: Modem status interrupts
-+ * are set via set_termios(), which will be occurring imminently
-+ * anyway, so we don't enable them here.
-+ */
-+ up->ier = UART_IER_RLSI | UART_IER_RDI;
-+ serial_outp(up, UART_IER, up->ier);
-+
-+ if (up->port.flags & UPF_FOURPORT) {
-+ unsigned int icp;
-+ /*
-+ * Enable interrupts on the AST Fourport board
-+ */
-+ icp = (up->port.iobase & 0xfe0) | 0x01f;
-+ outb_p(0x80, icp);
-+ (void) inb_p(icp);
-+ }
-+
-+ /*
-+ * And clear the interrupt registers again for luck.
-+ */
-+ (void) serial_inp(up, UART_LSR);
-+ (void) serial_inp(up, UART_RX);
-+ (void) serial_inp(up, UART_IIR);
-+ (void) serial_inp(up, UART_MSR);
-+
-+ return 0;
-+}
-+
-+static void serial8250_shutdown(struct uart_port *port)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+ unsigned long flags;
-+
-+ /*
-+ * Disable interrupts from this port
-+ */
-+ up->ier = 0;
-+ serial_outp(up, UART_IER, 0);
-+
-+ spin_lock_irqsave(&up->port.lock, flags);
-+ if (up->port.flags & UPF_FOURPORT) {
-+ /* reset interrupts on the AST Fourport board */
-+ inb((up->port.iobase & 0xfe0) | 0x1f);
-+ up->port.mctrl |= TIOCM_OUT1;
-+ } else
-+ up->port.mctrl &= ~TIOCM_OUT2;
-+
-+ serial8250_set_mctrl(&up->port, up->port.mctrl);
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+
-+ /*
-+ * Disable break condition and FIFOs
-+ */
-+ serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
-+ serial8250_clear_fifos(up);
-+
-+#ifdef CONFIG_SERIAL_8250_RSA
-+ /*
-+ * Reset the RSA board back to 115kbps compat mode.
-+ */
-+ disable_rsa(up);
-+#endif
-+
-+ /*
-+ * Read data port to reset things, and then unlink from
-+ * the IRQ chain.
-+ */
-+ (void) serial_in(up, UART_RX);
-+
-+ del_timer_sync(&up->timer);
-+ up->timer.function = serial8250_timeout;
-+ if (is_real_interrupt(up->port.irq))
-+ serial_unlink_irq_chain(up);
-+}
-+
-+static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
-+{
-+ unsigned int quot;
-+
-+ /*
-+ * Handle magic divisors for baud rates above baud_base on
-+ * SMSC SuperIO chips.
-+ */
-+ if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
-+ baud == (port->uartclk/4))
-+ quot = 0x8001;
-+ else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
-+ baud == (port->uartclk/8))
-+ quot = 0x8002;
-+ else
-+ quot = uart_get_divisor(port, baud);
-+
-+ return quot;
-+}
-+
-+static void
-+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
-+ struct ktermios *old)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+ unsigned char cval, fcr = 0;
-+ unsigned long flags;
-+ unsigned int baud, quot;
-+
-+ switch (termios->c_cflag & CSIZE) {
-+ case CS5:
-+ cval = UART_LCR_WLEN5;
-+ break;
-+ case CS6:
-+ cval = UART_LCR_WLEN6;
-+ break;
-+ case CS7:
-+ cval = UART_LCR_WLEN7;
-+ break;
-+ default:
-+ case CS8:
-+ cval = UART_LCR_WLEN8;
-+ break;
-+ }
-+
-+ if (termios->c_cflag & CSTOPB)
-+ cval |= UART_LCR_STOP;
-+ if (termios->c_cflag & PARENB)
-+ cval |= UART_LCR_PARITY;
-+ if (!(termios->c_cflag & PARODD))
-+ cval |= UART_LCR_EPAR;
-+#ifdef CMSPAR
-+ if (termios->c_cflag & CMSPAR)
-+ cval |= UART_LCR_SPAR;
-+#endif
-+
-+ /*
-+ * Ask the core to calculate the divisor for us.
-+ */
-+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-+ quot = serial8250_get_divisor(port, baud);
-+
-+ /*
-+ * Oxford Semi 952 rev B workaround
-+ */
-+ if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
-+ quot ++;
-+
-+ if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
-+ if (baud < 2400)
-+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
-+ else
-+ fcr = uart_config[up->port.type].fcr;
-+ }
-+
-+ /*
-+ * MCR-based auto flow control. When AFE is enabled, RTS will be
-+ * deasserted when the receive FIFO contains more characters than
-+ * the trigger, or the MCR RTS bit is cleared. In the case where
-+ * the remote UART is not using CTS auto flow control, we must
-+ * have sufficient FIFO entries for the latency of the remote
-+ * UART to respond. IOW, at least 32 bytes of FIFO.
-+ */
-+ if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) {
-+ up->mcr &= ~UART_MCR_AFE;
-+ if (termios->c_cflag & CRTSCTS)
-+ up->mcr |= UART_MCR_AFE;
-+ }
-+
-+ /*
-+ * Ok, we're now changing the port state. Do it with
-+ * interrupts disabled.
-+ */
-+ spin_lock_irqsave(&up->port.lock, flags);
-+
-+ /*
-+ * Update the per-port timeout.
-+ */
-+ uart_update_timeout(port, termios->c_cflag, baud);
-+
-+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
-+ if (termios->c_iflag & INPCK)
-+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+ if (termios->c_iflag & (BRKINT | PARMRK))
-+ up->port.read_status_mask |= UART_LSR_BI;
-+
-+ /*
-+ * Characteres to ignore
-+ */
-+ up->port.ignore_status_mask = 0;
-+ if (termios->c_iflag & IGNPAR)
-+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
-+ if (termios->c_iflag & IGNBRK) {
-+ up->port.ignore_status_mask |= UART_LSR_BI;
-+ /*
-+ * If we're ignoring parity and break indicators,
-+ * ignore overruns too (for real raw support).
-+ */
-+ if (termios->c_iflag & IGNPAR)
-+ up->port.ignore_status_mask |= UART_LSR_OE;
-+ }
-+
-+ /*
-+ * ignore all characters if CREAD is not set
-+ */
-+ if ((termios->c_cflag & CREAD) == 0)
-+ up->port.ignore_status_mask |= UART_LSR_DR;
-+
-+ /*
-+ * CTS flow control flag and modem status interrupts
-+ */
-+ up->ier &= ~UART_IER_MSI;
-+ if (!(up->bugs & UART_BUG_NOMSR) &&
-+ UART_ENABLE_MS(&up->port, termios->c_cflag))
-+ up->ier |= UART_IER_MSI;
-+ if (up->capabilities & UART_CAP_UUE)
-+ up->ier |= UART_IER_UUE | UART_IER_RTOIE;
-+
-+ serial_out(up, UART_IER, up->ier);
-+
-+ if (up->capabilities & UART_CAP_EFR) {
-+ unsigned char efr = 0;
-+ /*
-+ * TI16C752/Startech hardware flow control. FIXME:
-+ * - TI16C752 requires control thresholds to be set.
-+ * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
-+ */
-+ if (termios->c_cflag & CRTSCTS)
-+ efr |= UART_EFR_CTS;
-+
-+ serial_outp(up, UART_LCR, 0xBF);
-+ serial_outp(up, UART_EFR, efr);
-+ }
-+
-+#ifdef CONFIG_ARCH_OMAP15XX
-+ /* Workaround to enable 115200 baud on OMAP1510 internal ports */
-+ if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) {
-+ if (baud == 115200) {
-+ quot = 1;
-+ serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
-+ } else
-+ serial_out(up, UART_OMAP_OSC_12M_SEL, 0);
-+ }
-+#endif
-+
-+ if (up->capabilities & UART_NATSEMI) {
-+ /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
-+ serial_outp(up, UART_LCR, 0xe0);
-+ } else {
-+ serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
-+ }
-+
-+ serial_dl_write(up, quot);
-+
-+ /*
-+ * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
-+ * is written without DLAB set, this mode will be disabled.
-+ */
-+ if (up->port.type == PORT_16750)
-+ serial_outp(up, UART_FCR, fcr);
-+
-+ serial_outp(up, UART_LCR, cval); /* reset DLAB */
-+ up->lcr = cval; /* Save LCR */
-+ if (up->port.type != PORT_16750) {
-+ if (fcr & UART_FCR_ENABLE_FIFO) {
-+ /* emulated UARTs (Lucent Venus 167x) need two steps */
-+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-+ }
-+ serial_outp(up, UART_FCR, fcr); /* set fcr */
-+ }
-+ serial8250_set_mctrl(&up->port, up->port.mctrl);
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+}
-+
-+static void
-+serial8250_pm(struct uart_port *port, unsigned int state,
-+ unsigned int oldstate)
-+{
-+ struct uart_8250_port *p = (struct uart_8250_port *)port;
-+
-+ serial8250_set_sleep(p, state != 0);
-+
-+ if (p->pm)
-+ p->pm(port, state, oldstate);
-+}
-+
-+/*
-+ * Resource handling.
-+ */
-+static int serial8250_request_std_resource(struct uart_8250_port *up)
-+{
-+ unsigned int size = 8 << up->port.regshift;
-+ int ret = 0;
-+
-+ switch (up->port.iotype) {
-+ case UPIO_AU:
-+ size = 0x100000;
-+ /* fall thru */
-+ case UPIO_TSI:
-+ case UPIO_MEM32:
-+ case UPIO_MEM:
-+ if (!up->port.mapbase)
-+ break;
-+
-+ if (!request_mem_region(up->port.mapbase, size, "serial")) {
-+ ret = -EBUSY;
-+ break;
-+ }
-+
-+ if (up->port.flags & UPF_IOREMAP) {
-+ up->port.membase = ioremap(up->port.mapbase, size);
-+ if (!up->port.membase) {
-+ release_mem_region(up->port.mapbase, size);
-+ ret = -ENOMEM;
-+ }
-+ }
-+ break;
-+
-+ case UPIO_HUB6:
-+ case UPIO_PORT:
-+ if (!request_region(up->port.iobase, size, "serial"))
-+ ret = -EBUSY;
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static void serial8250_release_std_resource(struct uart_8250_port *up)
-+{
-+ unsigned int size = 8 << up->port.regshift;
-+
-+ switch (up->port.iotype) {
-+ case UPIO_AU:
-+ size = 0x100000;
-+ /* fall thru */
-+ case UPIO_TSI:
-+ case UPIO_MEM32:
-+ case UPIO_MEM:
-+ if (!up->port.mapbase)
-+ break;
-+
-+ if (up->port.flags & UPF_IOREMAP) {
-+ iounmap(up->port.membase);
-+ up->port.membase = NULL;
-+ }
-+
-+ release_mem_region(up->port.mapbase, size);
-+ break;
-+
-+ case UPIO_HUB6:
-+ case UPIO_PORT:
-+ release_region(up->port.iobase, size);
-+ break;
-+ }
-+}
-+
-+static int serial8250_request_rsa_resource(struct uart_8250_port *up)
-+{
-+ unsigned long start = UART_RSA_BASE << up->port.regshift;
-+ unsigned int size = 8 << up->port.regshift;
-+ int ret = -EINVAL;
-+
-+ switch (up->port.iotype) {
-+ case UPIO_HUB6:
-+ case UPIO_PORT:
-+ start += up->port.iobase;
-+ if (request_region(start, size, "serial-rsa"))
-+ ret = 0;
-+ else
-+ ret = -EBUSY;
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static void serial8250_release_rsa_resource(struct uart_8250_port *up)
-+{
-+ unsigned long offset = UART_RSA_BASE << up->port.regshift;
-+ unsigned int size = 8 << up->port.regshift;
-+
-+ switch (up->port.iotype) {
-+ case UPIO_HUB6:
-+ case UPIO_PORT:
-+ release_region(up->port.iobase + offset, size);
-+ break;
-+ }
-+}
-+
-+static void serial8250_release_port(struct uart_port *port)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+
-+ serial8250_release_std_resource(up);
-+ if (up->port.type == PORT_RSA)
-+ serial8250_release_rsa_resource(up);
-+}
-+
-+static int serial8250_request_port(struct uart_port *port)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+ int ret = 0;
-+
-+ ret = serial8250_request_std_resource(up);
-+ if (ret == 0 && up->port.type == PORT_RSA) {
-+ ret = serial8250_request_rsa_resource(up);
-+ if (ret < 0)
-+ serial8250_release_std_resource(up);
-+ }
-+
-+ return ret;
-+}
-+
-+static void serial8250_config_port(struct uart_port *port, int flags)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+ int probeflags = PROBE_ANY;
-+ int ret;
-+
-+ /*
-+ * Find the region that we can probe for. This in turn
-+ * tells us whether we can probe for the type of port.
-+ */
-+ ret = serial8250_request_std_resource(up);
-+ if (ret < 0)
-+ return;
-+
-+ ret = serial8250_request_rsa_resource(up);
-+ if (ret < 0)
-+ probeflags &= ~PROBE_RSA;
-+
-+ if (flags & UART_CONFIG_TYPE)
-+ autoconfig(up, probeflags);
-+ if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
-+ autoconfig_irq(up);
-+
-+ if (up->port.type != PORT_RSA && probeflags & PROBE_RSA)
-+ serial8250_release_rsa_resource(up);
-+ if (up->port.type == PORT_UNKNOWN)
-+ serial8250_release_std_resource(up);
-+}
-+
-+static int
-+serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+ if (ser->irq >= NR_IRQS || ser->irq < 0 ||
-+ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
-+ ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
-+ ser->type == PORT_STARTECH)
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static const char *
-+serial8250_type(struct uart_port *port)
-+{
-+ int type = port->type;
-+
-+ if (type >= ARRAY_SIZE(uart_config))
-+ type = 0;
-+ return uart_config[type].name;
-+}
-+
-+static struct uart_ops serial8250_pops = {
-+ .tx_empty = serial8250_tx_empty,
-+ .set_mctrl = serial8250_set_mctrl,
-+ .get_mctrl = serial8250_get_mctrl,
-+ .stop_tx = serial8250_stop_tx,
-+ .start_tx = serial8250_start_tx,
-+ .stop_rx = serial8250_stop_rx,
-+ .enable_ms = serial8250_enable_ms,
-+ .break_ctl = serial8250_break_ctl,
-+ .startup = serial8250_startup,
-+ .shutdown = serial8250_shutdown,
-+ .set_termios = serial8250_set_termios,
-+ .pm = serial8250_pm,
-+ .type = serial8250_type,
-+ .release_port = serial8250_release_port,
-+ .request_port = serial8250_request_port,
-+ .config_port = serial8250_config_port,
-+ .verify_port = serial8250_verify_port,
-+};
-+
-+static struct uart_8250_port serial8250_ports[UART_NR];
-+
-+static void __init serial8250_isa_init_ports(void)
-+{
-+ struct uart_8250_port *up;
-+ static int first = 1;
-+ int i;
-+
-+ if (!first)
-+ return;
-+ first = 0;
-+
-+ for (i = 0; i < nr_uarts; i++) {
-+ struct uart_8250_port *up = &serial8250_ports[i];
-+
-+ up->port.line = i;
-+ spin_lock_init(&up->port.lock);
-+
-+ init_timer(&up->timer);
-+ up->timer.function = serial8250_timeout;
-+
-+ /*
-+ * ALPHA_KLUDGE_MCR needs to be killed.
-+ */
-+ up->mcr_mask = ~ALPHA_KLUDGE_MCR;
-+ up->mcr_force = ALPHA_KLUDGE_MCR;
-+
-+ up->port.ops = &serial8250_pops;
-+ }
-+
-+ for (i = 0, up = serial8250_ports;
-+ i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
-+ i++, up++) {
-+ up->port.iobase = old_serial_port[i].port;
-+ up->port.irq = irq_canonicalize(old_serial_port[i].irq);
-+ up->port.uartclk = old_serial_port[i].baud_base * 16;
-+ up->port.flags = old_serial_port[i].flags;
-+ up->port.hub6 = old_serial_port[i].hub6;
-+ up->port.membase = old_serial_port[i].iomem_base;
-+ up->port.iotype = old_serial_port[i].io_type;
-+ up->port.regshift = old_serial_port[i].iomem_reg_shift;
-+ if (share_irqs)
-+ up->port.flags |= UPF_SHARE_IRQ;
-+ }
-+}
-+
-+static void __init
-+serial8250_register_ports(struct uart_driver *drv, struct device *dev)
-+{
-+ int i;
-+
-+ serial8250_isa_init_ports();
-+
-+ for (i = 0; i < nr_uarts; i++) {
-+ struct uart_8250_port *up = &serial8250_ports[i];
-+
-+ up->port.dev = dev;
-+ uart_add_one_port(drv, &up->port);
-+ }
-+}
-+
-+#ifdef CONFIG_SERIAL_8250_CONSOLE
-+
-+static void serial8250_console_putchar(struct uart_port *port, int ch)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)port;
-+
-+ wait_for_xmitr(up, UART_LSR_THRE);
-+ serial_out(up, UART_TX, ch);
-+}
-+
-+/*
-+ * Print a string to the serial port trying not to disturb
-+ * any possible real use of the port...
-+ *
-+ * The console_lock must be held when we get here.
-+ */
-+static void
-+serial8250_console_write(struct console *co, const char *s, unsigned int count)
-+{
-+ struct uart_8250_port *up = &serial8250_ports[co->index];
-+ unsigned long flags;
-+ unsigned int ier;
-+ int locked = 1;
-+
-+ touch_nmi_watchdog();
-+
-+ local_irq_save(flags);
-+ if (up->port.sysrq) {
-+ /* serial8250_handle_port() already took the lock */
-+ locked = 0;
-+ } else if (oops_in_progress) {
-+ locked = spin_trylock(&up->port.lock);
-+ } else
-+ spin_lock(&up->port.lock);
-+
-+ /*
-+ * First save the IER then disable the interrupts
-+ */
-+ ier = serial_in(up, UART_IER);
-+
-+ if (up->capabilities & UART_CAP_UUE)
-+ serial_out(up, UART_IER, UART_IER_UUE);
-+ else
-+ serial_out(up, UART_IER, 0);
-+
-+ uart_console_write(&up->port, s, count, serial8250_console_putchar);
-+
-+ /*
-+ * Finally, wait for transmitter to become empty
-+ * and restore the IER
-+ */
-+ wait_for_xmitr(up, BOTH_EMPTY);
-+ serial_out(up, UART_IER, ier);
-+
-+ if (locked)
-+ spin_unlock(&up->port.lock);
-+ local_irq_restore(flags);
-+}
-+
-+static int __init serial8250_console_setup(struct console *co, char *options)
-+{
-+ struct uart_port *port;
-+ int baud = 9600;
-+ int bits = 8;
-+ int parity = 'n';
-+ int flow = 'n';
-+
-+ /*
-+ * Check whether an invalid uart number has been specified, and
-+ * if so, search for the first available port that does have
-+ * console support.
-+ */
-+ if (co->index >= nr_uarts)
-+ co->index = 0;
-+ port = &serial8250_ports[co->index].port;
-+ if (!port->iobase && !port->membase)
-+ return -ENODEV;
-+
-+ if (options)
-+ uart_parse_options(options, &baud, &parity, &bits, &flow);
-+
-+ return uart_set_options(port, co, baud, parity, bits, flow);
-+}
-+
-+static struct uart_driver serial8250_reg;
-+static struct console serial8250_console = {
-+ .name = "ttyS",
-+ .write = serial8250_console_write,
-+ .device = uart_console_device,
-+ .setup = serial8250_console_setup,
-+ .flags = CON_PRINTBUFFER,
-+ .index = -1,
-+ .data = &serial8250_reg,
-+};
-+
-+static int __init serial8250_console_init(void)
-+{
-+ serial8250_isa_init_ports();
-+ register_console(&serial8250_console);
-+ return 0;
-+}
-+console_initcall(serial8250_console_init);
-+
-+static int __init find_port(struct uart_port *p)
-+{
-+ int line;
-+ struct uart_port *port;
-+
-+ for (line = 0; line < nr_uarts; line++) {
-+ port = &serial8250_ports[line].port;
-+ if (uart_match_port(p, port))
-+ return line;
-+ }
-+ return -ENODEV;
-+}
-+
-+int __init serial8250_start_console(struct uart_port *port, char *options)
-+{
-+ int line;
-+
-+ line = find_port(port);
-+ if (line < 0)
-+ return -ENODEV;
-+
-+ add_preferred_console("ttyS", line, options);
-+ printk("Adding console on ttyS%d at %s 0x%lx (options '%s')\n",
-+ line, port->iotype == UPIO_MEM ? "MMIO" : "I/O port",
-+ port->iotype == UPIO_MEM ? (unsigned long) port->mapbase :
-+ (unsigned long) port->iobase, options);
-+ if (!(serial8250_console.flags & CON_ENABLED)) {
-+ serial8250_console.flags &= ~CON_PRINTBUFFER;
-+ register_console(&serial8250_console);
-+ }
-+ return line;
-+}
-+
-+#define SERIAL8250_CONSOLE &serial8250_console
-+#else
-+#define SERIAL8250_CONSOLE NULL
-+#endif
-+
-+static struct uart_driver serial8250_reg = {
-+ .owner = THIS_MODULE,
-+ .driver_name = "serial",
-+ .dev_name = "ttyS",
-+ .major = TTY_MAJOR,
-+ .minor = 64,
-+ .nr = UART_NR,
-+ .cons = SERIAL8250_CONSOLE,
-+};
-+
-+/*
-+ * early_serial_setup - early registration for 8250 ports
-+ *
-+ * Setup an 8250 port structure prior to console initialisation. Use
-+ * after console initialisation will cause undefined behaviour.
-+ */
-+int __init early_serial_setup(struct uart_port *port)
-+{
-+ if (port->line >= ARRAY_SIZE(serial8250_ports))
-+ return -ENODEV;
-+
-+ serial8250_isa_init_ports();
-+ serial8250_ports[port->line].port = *port;
-+ serial8250_ports[port->line].port.ops = &serial8250_pops;
-+ return 0;
-+}
-+
-+/**
-+ * serial8250_suspend_port - suspend one serial port
-+ * @line: serial line number
-+ *
-+ * Suspend one serial port.
-+ */
-+void serial8250_suspend_port(int line)
-+{
-+ uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
-+}
-+
-+/**
-+ * serial8250_resume_port - resume one serial port
-+ * @line: serial line number
-+ *
-+ * Resume one serial port.
-+ */
-+void serial8250_resume_port(int line)
-+{
-+ uart_resume_port(&serial8250_reg, &serial8250_ports[line].port);
-+}
-+
-+/*
-+ * Register a set of serial devices attached to a platform device. The
-+ * list is terminated with a zero flags entry, which means we expect
-+ * all entries to have at least UPF_BOOT_AUTOCONF set.
-+ */
-+static int __devinit serial8250_probe(struct platform_device *dev)
-+{
-+ struct plat_serial8250_port *p = dev->dev.platform_data;
-+ struct uart_port port;
-+ int ret, i;
-+
-+ memset(&port, 0, sizeof(struct uart_port));
-+
-+ for (i = 0; p && p->flags != 0; p++, i++) {
-+ port.iobase = p->iobase;
-+ port.membase = p->membase;
-+ port.irq = p->irq;
-+ port.uartclk = p->uartclk;
-+ port.regshift = p->regshift;
-+ port.iotype = p->iotype;
-+ port.flags = p->flags;
-+ port.mapbase = p->mapbase;
-+ port.hub6 = p->hub6;
-+ port.dev = &dev->dev;
-+ if (share_irqs)
-+ port.flags |= UPF_SHARE_IRQ;
-+ ret = serial8250_register_port(&port);
-+ if (ret < 0) {
-+ dev_err(&dev->dev, "unable to register port at index %d "
-+ "(IO%lx MEM%lx IRQ%d): %d\n", i,
-+ p->iobase, p->mapbase, p->irq, ret);
-+ }
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * Remove serial ports registered against a platform device.
-+ */
-+static int __devexit serial8250_remove(struct platform_device *dev)
-+{
-+ int i;
-+
-+ for (i = 0; i < nr_uarts; i++) {
-+ struct uart_8250_port *up = &serial8250_ports[i];
-+
-+ if (up->port.dev == &dev->dev)
-+ serial8250_unregister_port(i);
-+ }
-+ return 0;
-+}
-+
-+static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ int i;
-+
-+ for (i = 0; i < UART_NR; i++) {
-+ struct uart_8250_port *up = &serial8250_ports[i];
-+
-+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
-+ uart_suspend_port(&serial8250_reg, &up->port);
-+ }
-+
-+ return 0;
-+}
-+
-+static int serial8250_resume(struct platform_device *dev)
-+{
-+ int i;
-+
-+ for (i = 0; i < UART_NR; i++) {
-+ struct uart_8250_port *up = &serial8250_ports[i];
-+
-+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
-+ uart_resume_port(&serial8250_reg, &up->port);
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver serial8250_isa_driver = {
-+ .probe = serial8250_probe,
-+ .remove = __devexit_p(serial8250_remove),
-+ .suspend = serial8250_suspend,
-+ .resume = serial8250_resume,
-+ .driver = {
-+ .name = "serial8250",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+/*
-+ * This "device" covers _all_ ISA 8250-compatible serial devices listed
-+ * in the table in include/asm/serial.h
-+ */
-+static struct platform_device *serial8250_isa_devs;
-+
-+/*
-+ * serial8250_register_port and serial8250_unregister_port allows for
-+ * 16x50 serial ports to be configured at run-time, to support PCMCIA
-+ * modems and PCI multiport cards.
-+ */
-+static DEFINE_MUTEX(serial_mutex);
-+
-+static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
-+{
-+ int i;
-+
-+ /*
-+ * First, find a port entry which matches.
-+ */
-+ for (i = 0; i < nr_uarts; i++)
-+ if (uart_match_port(&serial8250_ports[i].port, port))
-+ return &serial8250_ports[i];
-+
-+ /*
-+ * We didn't find a matching entry, so look for the first
-+ * free entry. We look for one which hasn't been previously
-+ * used (indicated by zero iobase).
-+ */
-+ for (i = 0; i < nr_uarts; i++)
-+ if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
-+ serial8250_ports[i].port.iobase == 0)
-+ return &serial8250_ports[i];
-+
-+ /*
-+ * That also failed. Last resort is to find any entry which
-+ * doesn't have a real port associated with it.
-+ */
-+ for (i = 0; i < nr_uarts; i++)
-+ if (serial8250_ports[i].port.type == PORT_UNKNOWN)
-+ return &serial8250_ports[i];
-+
-+ return NULL;
-+}
-+
-+/**
-+ * serial8250_register_port - register a serial port
-+ * @port: serial port template
-+ *
-+ * Configure the serial port specified by the request. If the
-+ * port exists and is in use, it is hung up and unregistered
-+ * first.
-+ *
-+ * The port is then probed and if necessary the IRQ is autodetected
-+ * If this fails an error is returned.
-+ *
-+ * On success the port is ready to use and the line number is returned.
-+ */
-+int serial8250_register_port(struct uart_port *port)
-+{
-+ struct uart_8250_port *uart;
-+ int ret = -ENOSPC;
-+
-+ if (port->uartclk == 0)
-+ return -EINVAL;
-+
-+ mutex_lock(&serial_mutex);
-+
-+ uart = serial8250_find_match_or_unused(port);
-+ if (uart) {
-+ uart_remove_one_port(&serial8250_reg, &uart->port);
-+
-+ uart->port.iobase = port->iobase;
-+ uart->port.membase = port->membase;
-+ uart->port.irq = port->irq;
-+ uart->port.uartclk = port->uartclk;
-+ uart->port.fifosize = port->fifosize;
-+ uart->port.regshift = port->regshift;
-+ uart->port.iotype = port->iotype;
-+ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
-+ uart->port.mapbase = port->mapbase;
-+ if (port->dev)
-+ uart->port.dev = port->dev;
-+
-+ ret = uart_add_one_port(&serial8250_reg, &uart->port);
-+ if (ret == 0)
-+ ret = uart->port.line;
-+ }
-+ mutex_unlock(&serial_mutex);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL(serial8250_register_port);
-+
-+/**
-+ * serial8250_unregister_port - remove a 16x50 serial port at runtime
-+ * @line: serial line number
-+ *
-+ * Remove one serial port. This may not be called from interrupt
-+ * context. We hand the port back to the our control.
-+ */
-+void serial8250_unregister_port(int line)
-+{
-+ struct uart_8250_port *uart = &serial8250_ports[line];
-+
-+ mutex_lock(&serial_mutex);
-+ uart_remove_one_port(&serial8250_reg, &uart->port);
-+ if (serial8250_isa_devs) {
-+ uart->port.flags &= ~UPF_BOOT_AUTOCONF;
-+ uart->port.type = PORT_UNKNOWN;
-+ uart->port.dev = &serial8250_isa_devs->dev;
-+ uart_add_one_port(&serial8250_reg, &uart->port);
-+ } else {
-+ uart->port.dev = NULL;
-+ }
-+ mutex_unlock(&serial_mutex);
-+}
-+EXPORT_SYMBOL(serial8250_unregister_port);
-+
-+static int __init serial8250_init(void)
-+{
-+ int ret, i;
-+
-+ if (nr_uarts > UART_NR)
-+ nr_uarts = UART_NR;
-+
-+ printk(KERN_INFO "Serial: 8250/16550 driver $Revision: 1.90 $ "
-+ "%d ports, IRQ sharing %sabled\n", nr_uarts,
-+ share_irqs ? "en" : "dis");
-+
-+ for (i = 0; i < NR_IRQS; i++)
-+ spin_lock_init(&irq_lists[i].lock);
-+
-+ ret = uart_register_driver(&serial8250_reg);
-+ if (ret)
-+ goto out;
-+
-+ serial8250_isa_devs = platform_device_alloc("serial8250",
-+ PLAT8250_DEV_LEGACY);
-+ if (!serial8250_isa_devs) {
-+ ret = -ENOMEM;
-+ goto unreg_uart_drv;
-+ }
-+
-+ ret = platform_device_add(serial8250_isa_devs);
-+ if (ret)
-+ goto put_dev;
-+
-+ serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
-+
-+ ret = platform_driver_register(&serial8250_isa_driver);
-+ if (ret == 0)
-+ goto out;
-+
-+ platform_device_del(serial8250_isa_devs);
-+ put_dev:
-+ platform_device_put(serial8250_isa_devs);
-+ unreg_uart_drv:
-+ uart_unregister_driver(&serial8250_reg);
-+ out:
-+ return ret;
-+}
-+
-+static void __exit serial8250_exit(void)
-+{
-+ struct platform_device *isa_dev = serial8250_isa_devs;
-+
-+ /*
-+ * This tells serial8250_unregister_port() not to re-register
-+ * the ports (thereby making serial8250_isa_driver permanently
-+ * in use.)
-+ */
-+ serial8250_isa_devs = NULL;
-+
-+ platform_driver_unregister(&serial8250_isa_driver);
-+ platform_device_unregister(isa_dev);
-+
-+ uart_unregister_driver(&serial8250_reg);
-+}
-+
-+module_init(serial8250_init);
-+module_exit(serial8250_exit);
-+
-+EXPORT_SYMBOL(serial8250_suspend_port);
-+EXPORT_SYMBOL(serial8250_resume_port);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Generic 8250/16x50 serial driver $Revision: 1.90 $");
-+
-+module_param(share_irqs, uint, 0644);
-+MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
-+ " (unsafe)");
-+
-+module_param(nr_uarts, uint, 0644);
-+MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
-+
-+#ifdef CONFIG_SERIAL_8250_RSA
-+module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
-+MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
-+#endif
-+MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
diff -Nur linux-2.6.21.1/drivers/usb/host/ehci.h linux-2.6.21.1-owrt/drivers/usb/host/ehci.h
--- linux-2.6.21.1/drivers/usb/host/ehci.h 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/usb/host/ehci.h 2007-05-23 23:37:18.000000000 +0200
@@ -7130,1729 +413,6 @@ diff -Nur linux-2.6.21.1/drivers/usb/host/ehci-hcd.c linux-2.6.21.1-owrt/drivers
/*
* hw default: 1K periodic list heads, one per frame.
* periodic_size can shrink by USBCMD update if hcc_params allows.
-diff -Nur linux-2.6.21.1/drivers/usb/host/ehci-hcd.c.orig linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c.orig
---- linux-2.6.21.1/drivers/usb/host/ehci-hcd.c.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c.orig 2007-04-27 23:49:26.000000000 +0200
-@@ -0,0 +1,1008 @@
-+/*
-+ * Copyright (c) 2000-2004 by David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/dmapool.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/ioport.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/smp_lock.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/timer.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/reboot.h>
-+#include <linux/usb.h>
-+#include <linux/moduleparam.h>
-+#include <linux/dma-mapping.h>
-+
-+#include "../core/hcd.h"
-+
-+#include <asm/byteorder.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/unaligned.h>
-+#ifdef CONFIG_PPC_PS3
-+#include <asm/firmware.h>
-+#endif
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * EHCI hc_driver implementation ... experimental, incomplete.
-+ * Based on the final 1.0 register interface specification.
-+ *
-+ * USB 2.0 shows up in upcoming www.pcmcia.org technology.
-+ * First was PCMCIA, like ISA; then CardBus, which is PCI.
-+ * Next comes "CardBay", using USB 2.0 signals.
-+ *
-+ * Contains additional contributions by Brad Hards, Rory Bolt, and others.
-+ * Special thanks to Intel and VIA for providing host controllers to
-+ * test this driver on, and Cypress (including In-System Design) for
-+ * providing early devices for those host controllers to talk to!
-+ *
-+ * HISTORY:
-+ *
-+ * 2004-05-10 Root hub and PCI suspend/resume support; remote wakeup. (db)
-+ * 2004-02-24 Replace pci_* with generic dma_* API calls (dsaxena@plexity.net)
-+ * 2003-12-29 Rewritten high speed iso transfer support (by Michal Sojka,
-+ * <sojkam@centrum.cz>, updates by DB).
-+ *
-+ * 2002-11-29 Correct handling for hw async_next register.
-+ * 2002-08-06 Handling for bulk and interrupt transfers is mostly shared;
-+ * only scheduling is different, no arbitrary limitations.
-+ * 2002-07-25 Sanity check PCI reads, mostly for better cardbus support,
-+ * clean up HC run state handshaking.
-+ * 2002-05-24 Preliminary FS/LS interrupts, using scheduling shortcuts
-+ * 2002-05-11 Clear TT errors for FS/LS ctrl/bulk. Fill in some other
-+ * missing pieces: enabling 64bit dma, handoff from BIOS/SMM.
-+ * 2002-05-07 Some error path cleanups to report better errors; wmb();
-+ * use non-CVS version id; better iso bandwidth claim.
-+ * 2002-04-19 Control/bulk/interrupt submit no longer uses giveback() on
-+ * errors in submit path. Bugfixes to interrupt scheduling/processing.
-+ * 2002-03-05 Initial high-speed ISO support; reduce ITD memory; shift
-+ * more checking to generic hcd framework (db). Make it work with
-+ * Philips EHCI; reduce PCI traffic; shorten IRQ path (Rory Bolt).
-+ * 2002-01-14 Minor cleanup; version synch.
-+ * 2002-01-08 Fix roothub handoff of FS/LS to companion controllers.
-+ * 2002-01-04 Control/Bulk queuing behaves.
-+ *
-+ * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
-+ * 2001-June Works with usb-storage and NEC EHCI on 2.4
-+ */
-+
-+#define DRIVER_VERSION "10 Dec 2004"
-+#define DRIVER_AUTHOR "David Brownell"
-+#define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver"
-+
-+static const char hcd_name [] = "ehci_hcd";
-+
-+
-+#undef EHCI_VERBOSE_DEBUG
-+#undef EHCI_URB_TRACE
-+
-+#ifdef DEBUG
-+#define EHCI_STATS
-+#endif
-+
-+/* magic numbers that can affect system performance */
-+#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
-+#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
-+#define EHCI_TUNE_RL_TT 0
-+#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
-+#define EHCI_TUNE_MULT_TT 1
-+#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
-+
-+#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */
-+#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */
-+#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */
-+#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */
-+
-+/* Initial IRQ latency: faster than hw default */
-+static int log2_irq_thresh = 0; // 0 to 6
-+module_param (log2_irq_thresh, int, S_IRUGO);
-+MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
-+
-+/* initial park setting: slower than hw default */
-+static unsigned park = 0;
-+module_param (park, uint, S_IRUGO);
-+MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
-+
-+/* for flakey hardware, ignore overcurrent indicators */
-+static int ignore_oc = 0;
-+module_param (ignore_oc, bool, S_IRUGO);
-+MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
-+
-+#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#include "ehci.h"
-+#include "ehci-dbg.c"
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * handshake - spin reading hc until handshake completes or fails
-+ * @ptr: address of hc register to be read
-+ * @mask: bits to look at in result of read
-+ * @done: value of those bits when handshake succeeds
-+ * @usec: timeout in microseconds
-+ *
-+ * Returns negative errno, or zero on success
-+ *
-+ * Success happens when the "mask" bits have the specified value (hardware
-+ * handshake done). There are two failure modes: "usec" have passed (major
-+ * hardware flakeout), or the register reads as all-ones (hardware removed).
-+ *
-+ * That last failure should_only happen in cases like physical cardbus eject
-+ * before driver shutdown. But it also seems to be caused by bugs in cardbus
-+ * bridge shutdown: shutting down the bridge before the devices using it.
-+ */
-+static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
-+ u32 mask, u32 done, int usec)
-+{
-+ u32 result;
-+
-+ do {
-+ result = ehci_readl(ehci, ptr);
-+ if (result == ~(u32)0) /* card removed */
-+ return -ENODEV;
-+ result &= mask;
-+ if (result == done)
-+ return 0;
-+ udelay (1);
-+ usec--;
-+ } while (usec > 0);
-+ return -ETIMEDOUT;
-+}
-+
-+/* force HC to halt state from unknown (EHCI spec section 2.3) */
-+static int ehci_halt (struct ehci_hcd *ehci)
-+{
-+ u32 temp = ehci_readl(ehci, &ehci->regs->status);
-+
-+ /* disable any irqs left enabled by previous code */
-+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
-+
-+ if ((temp & STS_HALT) != 0)
-+ return 0;
-+
-+ temp = ehci_readl(ehci, &ehci->regs->command);
-+ temp &= ~CMD_RUN;
-+ ehci_writel(ehci, temp, &ehci->regs->command);
-+ return handshake (ehci, &ehci->regs->status,
-+ STS_HALT, STS_HALT, 16 * 125);
-+}
-+
-+/* put TDI/ARC silicon into EHCI mode */
-+static void tdi_reset (struct ehci_hcd *ehci)
-+{
-+ u32 __iomem *reg_ptr;
-+ u32 tmp;
-+
-+ reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + 0x68);
-+ tmp = ehci_readl(ehci, reg_ptr);
-+ tmp |= 0x3;
-+ ehci_writel(ehci, tmp, reg_ptr);
-+}
-+
-+/* reset a non-running (STS_HALT == 1) controller */
-+static int ehci_reset (struct ehci_hcd *ehci)
-+{
-+ int retval;
-+ u32 command = ehci_readl(ehci, &ehci->regs->command);
-+
-+ command |= CMD_RESET;
-+ dbg_cmd (ehci, "reset", command);
-+ ehci_writel(ehci, command, &ehci->regs->command);
-+ ehci_to_hcd(ehci)->state = HC_STATE_HALT;
-+ ehci->next_statechange = jiffies;
-+ retval = handshake (ehci, &ehci->regs->command,
-+ CMD_RESET, 0, 250 * 1000);
-+
-+ if (retval)
-+ return retval;
-+
-+ if (ehci_is_TDI(ehci))
-+ tdi_reset (ehci);
-+
-+ return retval;
-+}
-+
-+/* idle the controller (from running) */
-+static void ehci_quiesce (struct ehci_hcd *ehci)
-+{
-+ u32 temp;
-+
-+#ifdef DEBUG
-+ if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
-+ BUG ();
-+#endif
-+
-+ /* wait for any schedule enables/disables to take effect */
-+ temp = ehci_readl(ehci, &ehci->regs->command) << 10;
-+ temp &= STS_ASS | STS_PSS;
-+ if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS,
-+ temp, 16 * 125) != 0) {
-+ ehci_to_hcd(ehci)->state = HC_STATE_HALT;
-+ return;
-+ }
-+
-+ /* then disable anything that's still active */
-+ temp = ehci_readl(ehci, &ehci->regs->command);
-+ temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE);
-+ ehci_writel(ehci, temp, &ehci->regs->command);
-+
-+ /* hardware can take 16 microframes to turn off ... */
-+ if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS,
-+ 0, 16 * 125) != 0) {
-+ ehci_to_hcd(ehci)->state = HC_STATE_HALT;
-+ return;
-+ }
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void ehci_work(struct ehci_hcd *ehci);
-+
-+#include "ehci-hub.c"
-+#include "ehci-mem.c"
-+#include "ehci-q.c"
-+#include "ehci-sched.c"
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void ehci_watchdog (unsigned long param)
-+{
-+ struct ehci_hcd *ehci = (struct ehci_hcd *) param;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave (&ehci->lock, flags);
-+
-+ /* lost IAA irqs wedge things badly; seen with a vt8235 */
-+ if (ehci->reclaim) {
-+ u32 status = ehci_readl(ehci, &ehci->regs->status);
-+ if (status & STS_IAA) {
-+ ehci_vdbg (ehci, "lost IAA\n");
-+ COUNT (ehci->stats.lost_iaa);
-+ ehci_writel(ehci, STS_IAA, &ehci->regs->status);
-+ ehci->reclaim_ready = 1;
-+ }
-+ }
-+
-+ /* stop async processing after it's idled a bit */
-+ if (test_bit (TIMER_ASYNC_OFF, &ehci->actions))
-+ start_unlink_async (ehci, ehci->async);
-+
-+ /* ehci could run by timer, without IRQs ... */
-+ ehci_work (ehci);
-+
-+ spin_unlock_irqrestore (&ehci->lock, flags);
-+}
-+
-+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
-+ * The firmware seems to think that powering off is a wakeup event!
-+ * This routine turns off remote wakeup and everything else, on all ports.
-+ */
-+static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
-+{
-+ int port = HCS_N_PORTS(ehci->hcs_params);
-+
-+ while (port--)
-+ ehci_writel(ehci, PORT_RWC_BITS,
-+ &ehci->regs->port_status[port]);
-+}
-+
-+/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
-+ * This forcibly disables dma and IRQs, helping kexec and other cases
-+ * where the next system software may expect clean state.
-+ */
-+static void
-+ehci_shutdown (struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci;
-+
-+ ehci = hcd_to_ehci (hcd);
-+ (void) ehci_halt (ehci);
-+ ehci_turn_off_all_ports(ehci);
-+
-+ /* make BIOS/etc use companion controller during reboot */
-+ ehci_writel(ehci, 0, &ehci->regs->configured_flag);
-+
-+ /* unblock posted writes */
-+ ehci_readl(ehci, &ehci->regs->configured_flag);
-+}
-+
-+static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
-+{
-+ unsigned port;
-+
-+ if (!HCS_PPC (ehci->hcs_params))
-+ return;
-+
-+ ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down");
-+ for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; )
-+ (void) ehci_hub_control(ehci_to_hcd(ehci),
-+ is_on ? SetPortFeature : ClearPortFeature,
-+ USB_PORT_FEAT_POWER,
-+ port--, NULL, 0);
-+ msleep(20);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * ehci_work is called from some interrupts, timers, and so on.
-+ * it calls driver completion functions, after dropping ehci->lock.
-+ */
-+static void ehci_work (struct ehci_hcd *ehci)
-+{
-+ timer_action_done (ehci, TIMER_IO_WATCHDOG);
-+ if (ehci->reclaim_ready)
-+ end_unlink_async (ehci);
-+
-+ /* another CPU may drop ehci->lock during a schedule scan while
-+ * it reports urb completions. this flag guards against bogus
-+ * attempts at re-entrant schedule scanning.
-+ */
-+ if (ehci->scanning)
-+ return;
-+ ehci->scanning = 1;
-+ scan_async (ehci);
-+ if (ehci->next_uframe != -1)
-+ scan_periodic (ehci);
-+ ehci->scanning = 0;
-+
-+ /* the IO watchdog guards against hardware or driver bugs that
-+ * misplace IRQs, and should let us run completely without IRQs.
-+ * such lossage has been observed on both VT6202 and VT8235.
-+ */
-+ if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
-+ (ehci->async->qh_next.ptr != NULL ||
-+ ehci->periodic_sched != 0))
-+ timer_action (ehci, TIMER_IO_WATCHDOG);
-+}
-+
-+static void ehci_stop (struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-+
-+ ehci_dbg (ehci, "stop\n");
-+
-+ /* Turn off port power on all root hub ports. */
-+ ehci_port_power (ehci, 0);
-+
-+ /* no more interrupts ... */
-+ del_timer_sync (&ehci->watchdog);
-+
-+ spin_lock_irq(&ehci->lock);
-+ if (HC_IS_RUNNING (hcd->state))
-+ ehci_quiesce (ehci);
-+
-+ ehci_reset (ehci);
-+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
-+ spin_unlock_irq(&ehci->lock);
-+
-+ /* let companion controllers work when we aren't */
-+ ehci_writel(ehci, 0, &ehci->regs->configured_flag);
-+
-+ remove_companion_file(ehci);
-+ remove_debug_files (ehci);
-+
-+ /* root hub is shut down separately (first, when possible) */
-+ spin_lock_irq (&ehci->lock);
-+ if (ehci->async)
-+ ehci_work (ehci);
-+ spin_unlock_irq (&ehci->lock);
-+ ehci_mem_cleanup (ehci);
-+
-+#ifdef EHCI_STATS
-+ ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
-+ ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
-+ ehci->stats.lost_iaa);
-+ ehci_dbg (ehci, "complete %ld unlink %ld\n",
-+ ehci->stats.complete, ehci->stats.unlink);
-+#endif
-+
-+ dbg_status (ehci, "ehci_stop completed",
-+ ehci_readl(ehci, &ehci->regs->status));
-+}
-+
-+/* one-time init, only for memory state */
-+static int ehci_init(struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ u32 temp;
-+ int retval;
-+ u32 hcc_params;
-+
-+ spin_lock_init(&ehci->lock);
-+
-+ init_timer(&ehci->watchdog);
-+ ehci->watchdog.function = ehci_watchdog;
-+ ehci->watchdog.data = (unsigned long) ehci;
-+
-+ /*
-+ * hw default: 1K periodic list heads, one per frame.
-+ * periodic_size can shrink by USBCMD update if hcc_params allows.
-+ */
-+ ehci->periodic_size = DEFAULT_I_TDPS;
-+ if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
-+ return retval;
-+
-+ /* controllers may cache some of the periodic schedule ... */
-+ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
-+ if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
-+ ehci->i_thresh = 8;
-+ else // N microframes cached
-+ ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
-+
-+ ehci->reclaim = NULL;
-+ ehci->reclaim_ready = 0;
-+ ehci->next_uframe = -1;
-+
-+ /*
-+ * dedicate a qh for the async ring head, since we couldn't unlink
-+ * a 'real' qh without stopping the async schedule [4.8]. use it
-+ * as the 'reclamation list head' too.
-+ * its dummy is used in hw_alt_next of many tds, to prevent the qh
-+ * from automatically advancing to the next td after short reads.
-+ */
-+ ehci->async->qh_next.qh = NULL;
-+ ehci->async->hw_next = QH_NEXT(ehci->async->qh_dma);
-+ ehci->async->hw_info1 = cpu_to_le32(QH_HEAD);
-+ ehci->async->hw_token = cpu_to_le32(QTD_STS_HALT);
-+ ehci->async->hw_qtd_next = EHCI_LIST_END;
-+ ehci->async->qh_state = QH_STATE_LINKED;
-+ ehci->async->hw_alt_next = QTD_NEXT(ehci->async->dummy->qtd_dma);
-+
-+ /* clear interrupt enables, set irq latency */
-+ if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
-+ log2_irq_thresh = 0;
-+ temp = 1 << (16 + log2_irq_thresh);
-+ if (HCC_CANPARK(hcc_params)) {
-+ /* HW default park == 3, on hardware that supports it (like
-+ * NVidia and ALI silicon), maximizes throughput on the async
-+ * schedule by avoiding QH fetches between transfers.
-+ *
-+ * With fast usb storage devices and NForce2, "park" seems to
-+ * make problems: throughput reduction (!), data errors...
-+ */
-+ if (park) {
-+ park = min(park, (unsigned) 3);
-+ temp |= CMD_PARK;
-+ temp |= park << 8;
-+ }
-+ ehci_dbg(ehci, "park %d\n", park);
-+ }
-+ if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
-+ /* periodic schedule size can be smaller than default */
-+ temp &= ~(3 << 2);
-+ temp |= (EHCI_TUNE_FLS << 2);
-+ switch (EHCI_TUNE_FLS) {
-+ case 0: ehci->periodic_size = 1024; break;
-+ case 1: ehci->periodic_size = 512; break;
-+ case 2: ehci->periodic_size = 256; break;
-+ default: BUG();
-+ }
-+ }
-+ ehci->command = temp;
-+
-+ return 0;
-+}
-+
-+/* start HC running; it's halted, ehci_init() has been run (once) */
-+static int ehci_run (struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-+ int retval;
-+ u32 temp;
-+ u32 hcc_params;
-+
-+ hcd->uses_new_polling = 1;
-+ hcd->poll_rh = 0;
-+
-+ /* EHCI spec section 4.1 */
-+ if ((retval = ehci_reset(ehci)) != 0) {
-+ ehci_mem_cleanup(ehci);
-+ return retval;
-+ }
-+ ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
-+ ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
-+
-+ /*
-+ * hcc_params controls whether ehci->regs->segment must (!!!)
-+ * be used; it constrains QH/ITD/SITD and QTD locations.
-+ * pci_pool consistent memory always uses segment zero.
-+ * streaming mappings for I/O buffers, like pci_map_single(),
-+ * can return segments above 4GB, if the device allows.
-+ *
-+ * NOTE: the dma mask is visible through dma_supported(), so
-+ * drivers can pass this info along ... like NETIF_F_HIGHDMA,
-+ * Scsi_Host.highmem_io, and so forth. It's readonly to all
-+ * host side drivers though.
-+ */
-+ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
-+ if (HCC_64BIT_ADDR(hcc_params)) {
-+ ehci_writel(ehci, 0, &ehci->regs->segment);
-+#if 0
-+// this is deeply broken on almost all architectures
-+ if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK))
-+ ehci_info(ehci, "enabled 64bit DMA\n");
-+#endif
-+ }
-+
-+
-+ // Philips, Intel, and maybe others need CMD_RUN before the
-+ // root hub will detect new devices (why?); NEC doesn't
-+ ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
-+ ehci->command |= CMD_RUN;
-+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
-+ dbg_cmd (ehci, "init", ehci->command);
-+
-+ /*
-+ * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
-+ * are explicitly handed to companion controller(s), so no TT is
-+ * involved with the root hub. (Except where one is integrated,
-+ * and there's no companion controller unless maybe for USB OTG.)
-+ */
-+ hcd->state = HC_STATE_RUNNING;
-+ ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
-+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
-+
-+ temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
-+ ehci_info (ehci,
-+ "USB %x.%x started, EHCI %x.%02x, driver %s%s\n",
-+ ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
-+ temp >> 8, temp & 0xff, DRIVER_VERSION,
-+ ignore_oc ? ", overcurrent ignored" : "");
-+
-+ ehci_writel(ehci, INTR_MASK,
-+ &ehci->regs->intr_enable); /* Turn On Interrupts */
-+
-+ /* GRR this is run-once init(), being done every time the HC starts.
-+ * So long as they're part of class devices, we can't do it init()
-+ * since the class device isn't created that early.
-+ */
-+ create_debug_files(ehci);
-+ create_companion_file(ehci);
-+
-+ return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static irqreturn_t ehci_irq (struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-+ u32 status, pcd_status = 0;
-+ int bh;
-+
-+ spin_lock (&ehci->lock);
-+
-+ status = ehci_readl(ehci, &ehci->regs->status);
-+
-+ /* e.g. cardbus physical eject */
-+ if (status == ~(u32) 0) {
-+ ehci_dbg (ehci, "device removed\n");
-+ goto dead;
-+ }
-+
-+ status &= INTR_MASK;
-+ if (!status) { /* irq sharing? */
-+ spin_unlock(&ehci->lock);
-+ return IRQ_NONE;
-+ }
-+
-+ /* clear (just) interrupts */
-+ ehci_writel(ehci, status, &ehci->regs->status);
-+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
-+ bh = 0;
-+
-+#ifdef EHCI_VERBOSE_DEBUG
-+ /* unrequested/ignored: Frame List Rollover */
-+ dbg_status (ehci, "irq", status);
-+#endif
-+
-+ /* INT, ERR, and IAA interrupt rates can be throttled */
-+
-+ /* normal [4.15.1.2] or error [4.15.1.1] completion */
-+ if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
-+ if (likely ((status & STS_ERR) == 0))
-+ COUNT (ehci->stats.normal);
-+ else
-+ COUNT (ehci->stats.error);
-+ bh = 1;
-+ }
-+
-+ /* complete the unlinking of some qh [4.15.2.3] */
-+ if (status & STS_IAA) {
-+ COUNT (ehci->stats.reclaim);
-+ ehci->reclaim_ready = 1;
-+ bh = 1;
-+ }
-+
-+ /* remote wakeup [4.3.1] */
-+ if (status & STS_PCD) {
-+ unsigned i = HCS_N_PORTS (ehci->hcs_params);
-+ pcd_status = status;
-+
-+ /* resume root hub? */
-+ if (!(ehci_readl(ehci, &ehci->regs->command) & CMD_RUN))
-+ usb_hcd_resume_root_hub(hcd);
-+
-+ while (i--) {
-+ int pstatus = ehci_readl(ehci,
-+ &ehci->regs->port_status [i]);
-+
-+ if (pstatus & PORT_OWNER)
-+ continue;
-+ if (!(pstatus & PORT_RESUME)
-+ || ehci->reset_done [i] != 0)
-+ continue;
-+
-+ /* start 20 msec resume signaling from this port,
-+ * and make khubd collect PORT_STAT_C_SUSPEND to
-+ * stop that signaling.
-+ */
-+ ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
-+ ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
-+ mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
-+ }
-+ }
-+
-+ /* PCI errors [4.15.2.4] */
-+ if (unlikely ((status & STS_FATAL) != 0)) {
-+ /* bogus "fatal" IRQs appear on some chips... why? */
-+ status = ehci_readl(ehci, &ehci->regs->status);
-+ dbg_cmd (ehci, "fatal", ehci_readl(ehci,
-+ &ehci->regs->command));
-+ dbg_status (ehci, "fatal", status);
-+ if (status & STS_HALT) {
-+ ehci_err (ehci, "fatal error\n");
-+dead:
-+ ehci_reset (ehci);
-+ ehci_writel(ehci, 0, &ehci->regs->configured_flag);
-+ /* generic layer kills/unlinks all urbs, then
-+ * uses ehci_stop to clean up the rest
-+ */
-+ bh = 1;
-+ }
-+ }
-+
-+ if (bh)
-+ ehci_work (ehci);
-+ spin_unlock (&ehci->lock);
-+ if (pcd_status & STS_PCD)
-+ usb_hcd_poll_rh_status(hcd);
-+ return IRQ_HANDLED;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * non-error returns are a promise to giveback() the urb later
-+ * we drop ownership so next owner (or urb unlink) can get it
-+ *
-+ * urb + dev is in hcd.self.controller.urb_list
-+ * we're queueing TDs onto software and hardware lists
-+ *
-+ * hcd-specific init for hcpriv hasn't been done yet
-+ *
-+ * NOTE: control, bulk, and interrupt share the same code to append TDs
-+ * to a (possibly active) QH, and the same QH scanning code.
-+ */
-+static int ehci_urb_enqueue (
-+ struct usb_hcd *hcd,
-+ struct usb_host_endpoint *ep,
-+ struct urb *urb,
-+ gfp_t mem_flags
-+) {
-+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-+ struct list_head qtd_list;
-+
-+ INIT_LIST_HEAD (&qtd_list);
-+
-+ switch (usb_pipetype (urb->pipe)) {
-+ // case PIPE_CONTROL:
-+ // case PIPE_BULK:
-+ default:
-+ if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
-+ return -ENOMEM;
-+ return submit_async (ehci, ep, urb, &qtd_list, mem_flags);
-+
-+ case PIPE_INTERRUPT:
-+ if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
-+ return -ENOMEM;
-+ return intr_submit (ehci, ep, urb, &qtd_list, mem_flags);
-+
-+ case PIPE_ISOCHRONOUS:
-+ if (urb->dev->speed == USB_SPEED_HIGH)
-+ return itd_submit (ehci, urb, mem_flags);
-+ else
-+ return sitd_submit (ehci, urb, mem_flags);
-+ }
-+}
-+
-+static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
-+{
-+ /* if we need to use IAA and it's busy, defer */
-+ if (qh->qh_state == QH_STATE_LINKED
-+ && ehci->reclaim
-+ && HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) {
-+ struct ehci_qh *last;
-+
-+ for (last = ehci->reclaim;
-+ last->reclaim;
-+ last = last->reclaim)
-+ continue;
-+ qh->qh_state = QH_STATE_UNLINK_WAIT;
-+ last->reclaim = qh;
-+
-+ /* bypass IAA if the hc can't care */
-+ } else if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && ehci->reclaim)
-+ end_unlink_async (ehci);
-+
-+ /* something else might have unlinked the qh by now */
-+ if (qh->qh_state == QH_STATE_LINKED)
-+ start_unlink_async (ehci, qh);
-+}
-+
-+/* remove from hardware lists
-+ * completions normally happen asynchronously
-+ */
-+
-+static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-+ struct ehci_qh *qh;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave (&ehci->lock, flags);
-+ switch (usb_pipetype (urb->pipe)) {
-+ // case PIPE_CONTROL:
-+ // case PIPE_BULK:
-+ default:
-+ qh = (struct ehci_qh *) urb->hcpriv;
-+ if (!qh)
-+ break;
-+ unlink_async (ehci, qh);
-+ break;
-+
-+ case PIPE_INTERRUPT:
-+ qh = (struct ehci_qh *) urb->hcpriv;
-+ if (!qh)
-+ break;
-+ switch (qh->qh_state) {
-+ case QH_STATE_LINKED:
-+ intr_deschedule (ehci, qh);
-+ /* FALL THROUGH */
-+ case QH_STATE_IDLE:
-+ qh_completions (ehci, qh);
-+ break;
-+ default:
-+ ehci_dbg (ehci, "bogus qh %p state %d\n",
-+ qh, qh->qh_state);
-+ goto done;
-+ }
-+
-+ /* reschedule QH iff another request is queued */
-+ if (!list_empty (&qh->qtd_list)
-+ && HC_IS_RUNNING (hcd->state)) {
-+ int status;
-+
-+ status = qh_schedule (ehci, qh);
-+ spin_unlock_irqrestore (&ehci->lock, flags);
-+
-+ if (status != 0) {
-+ // shouldn't happen often, but ...
-+ // FIXME kill those tds' urbs
-+ err ("can't reschedule qh %p, err %d",
-+ qh, status);
-+ }
-+ return status;
-+ }
-+ break;
-+
-+ case PIPE_ISOCHRONOUS:
-+ // itd or sitd ...
-+
-+ // wait till next completion, do it then.
-+ // completion irqs can wait up to 1024 msec,
-+ break;
-+ }
-+done:
-+ spin_unlock_irqrestore (&ehci->lock, flags);
-+ return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+// bulk qh holds the data toggle
-+
-+static void
-+ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-+ unsigned long flags;
-+ struct ehci_qh *qh, *tmp;
-+
-+ /* ASSERT: any requests/urbs are being unlinked */
-+ /* ASSERT: nobody can be submitting urbs for this any more */
-+
-+rescan:
-+ spin_lock_irqsave (&ehci->lock, flags);
-+ qh = ep->hcpriv;
-+ if (!qh)
-+ goto done;
-+
-+ /* endpoints can be iso streams. for now, we don't
-+ * accelerate iso completions ... so spin a while.
-+ */
-+ if (qh->hw_info1 == 0) {
-+ ehci_vdbg (ehci, "iso delay\n");
-+ goto idle_timeout;
-+ }
-+
-+ if (!HC_IS_RUNNING (hcd->state))
-+ qh->qh_state = QH_STATE_IDLE;
-+ switch (qh->qh_state) {
-+ case QH_STATE_LINKED:
-+ for (tmp = ehci->async->qh_next.qh;
-+ tmp && tmp != qh;
-+ tmp = tmp->qh_next.qh)
-+ continue;
-+ /* periodic qh self-unlinks on empty */
-+ if (!tmp)
-+ goto nogood;
-+ unlink_async (ehci, qh);
-+ /* FALL THROUGH */
-+ case QH_STATE_UNLINK: /* wait for hw to finish? */
-+idle_timeout:
-+ spin_unlock_irqrestore (&ehci->lock, flags);
-+ schedule_timeout_uninterruptible(1);
-+ goto rescan;
-+ case QH_STATE_IDLE: /* fully unlinked */
-+ if (list_empty (&qh->qtd_list)) {
-+ qh_put (qh);
-+ break;
-+ }
-+ /* else FALL THROUGH */
-+ default:
-+nogood:
-+ /* caller was supposed to have unlinked any requests;
-+ * that's not our job. just leak this memory.
-+ */
-+ ehci_err (ehci, "qh %p (#%02x) state %d%s\n",
-+ qh, ep->desc.bEndpointAddress, qh->qh_state,
-+ list_empty (&qh->qtd_list) ? "" : "(has tds)");
-+ break;
-+ }
-+ ep->hcpriv = NULL;
-+done:
-+ spin_unlock_irqrestore (&ehci->lock, flags);
-+ return;
-+}
-+
-+static int ehci_get_frame (struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-+ return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) %
-+ ehci->periodic_size;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
-+
-+MODULE_DESCRIPTION (DRIVER_INFO);
-+MODULE_AUTHOR (DRIVER_AUTHOR);
-+MODULE_LICENSE ("GPL");
-+
-+#ifdef CONFIG_PCI
-+#include "ehci-pci.c"
-+#define PCI_DRIVER ehci_pci_driver
-+#endif
-+
-+#ifdef CONFIG_MPC834x
-+#include "ehci-fsl.c"
-+#define PLATFORM_DRIVER ehci_fsl_driver
-+#endif
-+
-+#ifdef CONFIG_SOC_AU1200
-+#include "ehci-au1xxx.c"
-+#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
-+#endif
-+
-+#ifdef CONFIG_PPC_PS3
-+#include "ehci-ps3.c"
-+#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_sb_driver
-+#endif
-+
-+#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-+ !defined(PS3_SYSTEM_BUS_DRIVER)
-+#error "missing bus glue for ehci-hcd"
-+#endif
-+
-+static int __init ehci_hcd_init(void)
-+{
-+ int retval = 0;
-+
-+ pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
-+ hcd_name,
-+ sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
-+ sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
-+
-+#ifdef PLATFORM_DRIVER
-+ retval = platform_driver_register(&PLATFORM_DRIVER);
-+ if (retval < 0)
-+ return retval;
-+#endif
-+
-+#ifdef PCI_DRIVER
-+ retval = pci_register_driver(&PCI_DRIVER);
-+ if (retval < 0) {
-+#ifdef PLATFORM_DRIVER
-+ platform_driver_unregister(&PLATFORM_DRIVER);
-+#endif
-+ return retval;
-+ }
-+#endif
-+
-+#ifdef PS3_SYSTEM_BUS_DRIVER
-+ if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
-+ retval = ps3_system_bus_driver_register(
-+ &PS3_SYSTEM_BUS_DRIVER);
-+ if (retval < 0) {
-+#ifdef PLATFORM_DRIVER
-+ platform_driver_unregister(&PLATFORM_DRIVER);
-+#endif
-+#ifdef PCI_DRIVER
-+ pci_unregister_driver(&PCI_DRIVER);
-+#endif
-+ return retval;
-+ }
-+ }
-+#endif
-+
-+ return retval;
-+}
-+module_init(ehci_hcd_init);
-+
-+static void __exit ehci_hcd_cleanup(void)
-+{
-+#ifdef PLATFORM_DRIVER
-+ platform_driver_unregister(&PLATFORM_DRIVER);
-+#endif
-+#ifdef PCI_DRIVER
-+ pci_unregister_driver(&PCI_DRIVER);
-+#endif
-+#ifdef PS3_SYSTEM_BUS_DRIVER
-+ if (firmware_has_feature(FW_FEATURE_PS3_LV1))
-+ ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
-+#endif
-+}
-+module_exit(ehci_hcd_cleanup);
-+
-diff -Nur linux-2.6.21.1/drivers/usb/host/ehci.h.orig linux-2.6.21.1-owrt/drivers/usb/host/ehci.h.orig
---- linux-2.6.21.1/drivers/usb/host/ehci.h.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1-owrt/drivers/usb/host/ehci.h.orig 2007-04-27 23:49:26.000000000 +0200
-@@ -0,0 +1,707 @@
-+/*
-+ * Copyright (c) 2001-2002 by David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software Foundation,
-+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#ifndef __LINUX_EHCI_HCD_H
-+#define __LINUX_EHCI_HCD_H
-+
-+/* definitions used for the EHCI driver */
-+
-+/* statistics can be kept for for tuning/monitoring */
-+struct ehci_stats {
-+ /* irq usage */
-+ unsigned long normal;
-+ unsigned long error;
-+ unsigned long reclaim;
-+ unsigned long lost_iaa;
-+
-+ /* termination of urbs from core */
-+ unsigned long complete;
-+ unsigned long unlink;
-+};
-+
-+/* ehci_hcd->lock guards shared data against other CPUs:
-+ * ehci_hcd: async, reclaim, periodic (and shadow), ...
-+ * usb_host_endpoint: hcpriv
-+ * ehci_qh: qh_next, qtd_list
-+ * ehci_qtd: qtd_list
-+ *
-+ * Also, hold this lock when talking to HC registers or
-+ * when updating hw_* fields in shared qh/qtd/... structures.
-+ */
-+
-+#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */
-+
-+struct ehci_hcd { /* one per controller */
-+ /* glue to PCI and HCD framework */
-+ struct ehci_caps __iomem *caps;
-+ struct ehci_regs __iomem *regs;
-+ struct ehci_dbg_port __iomem *debug;
-+
-+ __u32 hcs_params; /* cached register copy */
-+ spinlock_t lock;
-+
-+ /* async schedule support */
-+ struct ehci_qh *async;
-+ struct ehci_qh *reclaim;
-+ unsigned reclaim_ready : 1;
-+ unsigned scanning : 1;
-+
-+ /* periodic schedule support */
-+#define DEFAULT_I_TDPS 1024 /* some HCs can do less */
-+ unsigned periodic_size;
-+ __le32 *periodic; /* hw periodic table */
-+ dma_addr_t periodic_dma;
-+ unsigned i_thresh; /* uframes HC might cache */
-+
-+ union ehci_shadow *pshadow; /* mirror hw periodic table */
-+ int next_uframe; /* scan periodic, start here */
-+ unsigned periodic_sched; /* periodic activity count */
-+
-+ /* per root hub port */
-+ unsigned long reset_done [EHCI_MAX_ROOT_PORTS];
-+ /* bit vectors (one bit per port) */
-+ unsigned long bus_suspended; /* which ports were
-+ already suspended at the start of a bus suspend */
-+ unsigned long companion_ports; /* which ports are
-+ dedicated to the companion controller */
-+
-+ /* per-HC memory pools (could be per-bus, but ...) */
-+ struct dma_pool *qh_pool; /* qh per active urb */
-+ struct dma_pool *qtd_pool; /* one or more per qh */
-+ struct dma_pool *itd_pool; /* itd per iso urb */
-+ struct dma_pool *sitd_pool; /* sitd per split iso urb */
-+
-+ struct timer_list watchdog;
-+ unsigned long actions;
-+ unsigned stamp;
-+ unsigned long next_statechange;
-+ u32 command;
-+
-+ /* SILICON QUIRKS */
-+ unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */
-+ unsigned no_selective_suspend:1;
-+ unsigned has_fsl_port_bug:1; /* FreeScale */
-+ unsigned big_endian_mmio:1;
-+
-+ u8 sbrn; /* packed release number */
-+
-+ /* irq statistics */
-+#ifdef EHCI_STATS
-+ struct ehci_stats stats;
-+# define COUNT(x) do { (x)++; } while (0)
-+#else
-+# define COUNT(x) do {} while (0)
-+#endif
-+};
-+
-+/* convert between an HCD pointer and the corresponding EHCI_HCD */
-+static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd)
-+{
-+ return (struct ehci_hcd *) (hcd->hcd_priv);
-+}
-+static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci)
-+{
-+ return container_of ((void *) ehci, struct usb_hcd, hcd_priv);
-+}
-+
-+
-+enum ehci_timer_action {
-+ TIMER_IO_WATCHDOG,
-+ TIMER_IAA_WATCHDOG,
-+ TIMER_ASYNC_SHRINK,
-+ TIMER_ASYNC_OFF,
-+};
-+
-+static inline void
-+timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
-+{
-+ clear_bit (action, &ehci->actions);
-+}
-+
-+static inline void
-+timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
-+{
-+ if (!test_and_set_bit (action, &ehci->actions)) {
-+ unsigned long t;
-+
-+ switch (action) {
-+ case TIMER_IAA_WATCHDOG:
-+ t = EHCI_IAA_JIFFIES;
-+ break;
-+ case TIMER_IO_WATCHDOG:
-+ t = EHCI_IO_JIFFIES;
-+ break;
-+ case TIMER_ASYNC_OFF:
-+ t = EHCI_ASYNC_JIFFIES;
-+ break;
-+ // case TIMER_ASYNC_SHRINK:
-+ default:
-+ t = EHCI_SHRINK_JIFFIES;
-+ break;
-+ }
-+ t += jiffies;
-+ // all timings except IAA watchdog can be overridden.
-+ // async queue SHRINK often precedes IAA. while it's ready
-+ // to go OFF neither can matter, and afterwards the IO
-+ // watchdog stops unless there's still periodic traffic.
-+ if (action != TIMER_IAA_WATCHDOG
-+ && t > ehci->watchdog.expires
-+ && timer_pending (&ehci->watchdog))
-+ return;
-+ mod_timer (&ehci->watchdog, t);
-+ }
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-+
-+/* Section 2.2 Host Controller Capability Registers */
-+struct ehci_caps {
-+ /* these fields are specified as 8 and 16 bit registers,
-+ * but some hosts can't perform 8 or 16 bit PCI accesses.
-+ */
-+ u32 hc_capbase;
-+#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
-+#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
-+ u32 hcs_params; /* HCSPARAMS - offset 0x4 */
-+#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
-+#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
-+#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
-+#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
-+#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
-+#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
-+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
-+
-+ u32 hcc_params; /* HCCPARAMS - offset 0x8 */
-+#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
-+#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
-+#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
-+#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
-+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
-+#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
-+ u8 portroute [8]; /* nibbles for routing - offset 0xC */
-+} __attribute__ ((packed));
-+
-+
-+/* Section 2.3 Host Controller Operational Registers */
-+struct ehci_regs {
-+
-+ /* USBCMD: offset 0x00 */
-+ u32 command;
-+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-+#define CMD_PARK (1<<11) /* enable "park" on async qh */
-+#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
-+#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
-+#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
-+#define CMD_ASE (1<<5) /* async schedule enable */
-+#define CMD_PSE (1<<4) /* periodic schedule enable */
-+/* 3:2 is periodic frame list size */
-+#define CMD_RESET (1<<1) /* reset HC not bus */
-+#define CMD_RUN (1<<0) /* start/stop HC */
-+
-+ /* USBSTS: offset 0x04 */
-+ u32 status;
-+#define STS_ASS (1<<15) /* Async Schedule Status */
-+#define STS_PSS (1<<14) /* Periodic Schedule Status */
-+#define STS_RECL (1<<13) /* Reclamation */
-+#define STS_HALT (1<<12) /* Not running (any reason) */
-+/* some bits reserved */
-+ /* these STS_* flags are also intr_enable bits (USBINTR) */
-+#define STS_IAA (1<<5) /* Interrupted on async advance */
-+#define STS_FATAL (1<<4) /* such as some PCI access errors */
-+#define STS_FLR (1<<3) /* frame list rolled over */
-+#define STS_PCD (1<<2) /* port change detect */
-+#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
-+#define STS_INT (1<<0) /* "normal" completion (short, ...) */
-+
-+ /* USBINTR: offset 0x08 */
-+ u32 intr_enable;
-+
-+ /* FRINDEX: offset 0x0C */
-+ u32 frame_index; /* current microframe number */
-+ /* CTRLDSSEGMENT: offset 0x10 */
-+ u32 segment; /* address bits 63:32 if needed */
-+ /* PERIODICLISTBASE: offset 0x14 */
-+ u32 frame_list; /* points to periodic list */
-+ /* ASYNCLISTADDR: offset 0x18 */
-+ u32 async_next; /* address of next async queue head */
-+
-+ u32 reserved [9];
-+
-+ /* CONFIGFLAG: offset 0x40 */
-+ u32 configured_flag;
-+#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
-+
-+ /* PORTSC: offset 0x44 */
-+ u32 port_status [0]; /* up to N_PORTS */
-+/* 31:23 reserved */
-+#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
-+#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
-+#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
-+/* 19:16 for port testing */
-+#define PORT_LED_OFF (0<<14)
-+#define PORT_LED_AMBER (1<<14)
-+#define PORT_LED_GREEN (2<<14)
-+#define PORT_LED_MASK (3<<14)
-+#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
-+#define PORT_POWER (1<<12) /* true: has power (see PPC) */
-+#define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */
-+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-+/* 9 reserved */
-+#define PORT_RESET (1<<8) /* reset port */
-+#define PORT_SUSPEND (1<<7) /* suspend port */
-+#define PORT_RESUME (1<<6) /* resume it */
-+#define PORT_OCC (1<<5) /* over current change */
-+#define PORT_OC (1<<4) /* over current active */
-+#define PORT_PEC (1<<3) /* port enable change */
-+#define PORT_PE (1<<2) /* port enable */
-+#define PORT_CSC (1<<1) /* connect status change */
-+#define PORT_CONNECT (1<<0) /* device connected */
-+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
-+} __attribute__ ((packed));
-+
-+/* Appendix C, Debug port ... intended for use with special "debug devices"
-+ * that can help if there's no serial console. (nonstandard enumeration.)
-+ */
-+struct ehci_dbg_port {
-+ u32 control;
-+#define DBGP_OWNER (1<<30)
-+#define DBGP_ENABLED (1<<28)
-+#define DBGP_DONE (1<<16)
-+#define DBGP_INUSE (1<<10)
-+#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
-+# define DBGP_ERR_BAD 1
-+# define DBGP_ERR_SIGNAL 2
-+#define DBGP_ERROR (1<<6)
-+#define DBGP_GO (1<<5)
-+#define DBGP_OUT (1<<4)
-+#define DBGP_LEN(x) (((x)>>0)&0x0f)
-+ u32 pids;
-+#define DBGP_PID_GET(x) (((x)>>16)&0xff)
-+#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok))
-+ u32 data03;
-+ u32 data47;
-+ u32 address;
-+#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep))
-+} __attribute__ ((packed));
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#define QTD_NEXT(dma) cpu_to_le32((u32)dma)
-+
-+/*
-+ * EHCI Specification 0.95 Section 3.5
-+ * QTD: describe data transfer components (buffer, direction, ...)
-+ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
-+ *
-+ * These are associated only with "QH" (Queue Head) structures,
-+ * used with control, bulk, and interrupt transfers.
-+ */
-+struct ehci_qtd {
-+ /* first part defined by EHCI spec */
-+ __le32 hw_next; /* see EHCI 3.5.1 */
-+ __le32 hw_alt_next; /* see EHCI 3.5.2 */
-+ __le32 hw_token; /* see EHCI 3.5.3 */
-+#define QTD_TOGGLE (1 << 31) /* data toggle */
-+#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
-+#define QTD_IOC (1 << 15) /* interrupt on complete */
-+#define QTD_CERR(tok) (((tok)>>10) & 0x3)
-+#define QTD_PID(tok) (((tok)>>8) & 0x3)
-+#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
-+#define QTD_STS_HALT (1 << 6) /* halted on error */
-+#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
-+#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
-+#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
-+#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
-+#define QTD_STS_STS (1 << 1) /* split transaction state */
-+#define QTD_STS_PING (1 << 0) /* issue PING? */
-+ __le32 hw_buf [5]; /* see EHCI 3.5.4 */
-+ __le32 hw_buf_hi [5]; /* Appendix B */
-+
-+ /* the rest is HCD-private */
-+ dma_addr_t qtd_dma; /* qtd address */
-+ struct list_head qtd_list; /* sw qtd list */
-+ struct urb *urb; /* qtd's urb */
-+ size_t length; /* length of buffer */
-+} __attribute__ ((aligned (32)));
-+
-+/* mask NakCnt+T in qh->hw_alt_next */
-+#define QTD_MASK __constant_cpu_to_le32 (~0x1f)
-+
-+#define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* type tag from {qh,itd,sitd,fstn}->hw_next */
-+#define Q_NEXT_TYPE(dma) ((dma) & __constant_cpu_to_le32 (3 << 1))
-+
-+/* values for that type tag */
-+#define Q_TYPE_ITD __constant_cpu_to_le32 (0 << 1)
-+#define Q_TYPE_QH __constant_cpu_to_le32 (1 << 1)
-+#define Q_TYPE_SITD __constant_cpu_to_le32 (2 << 1)
-+#define Q_TYPE_FSTN __constant_cpu_to_le32 (3 << 1)
-+
-+/* next async queue entry, or pointer to interrupt/periodic QH */
-+#define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)
-+
-+/* for periodic/async schedules and qtd lists, mark end of list */
-+#define EHCI_LIST_END __constant_cpu_to_le32(1) /* "null pointer" to hw */
-+
-+/*
-+ * Entries in periodic shadow table are pointers to one of four kinds
-+ * of data structure. That's dictated by the hardware; a type tag is
-+ * encoded in the low bits of the hardware's periodic schedule. Use
-+ * Q_NEXT_TYPE to get the tag.
-+ *
-+ * For entries in the async schedule, the type tag always says "qh".
-+ */
-+union ehci_shadow {
-+ struct ehci_qh *qh; /* Q_TYPE_QH */
-+ struct ehci_itd *itd; /* Q_TYPE_ITD */
-+ struct ehci_sitd *sitd; /* Q_TYPE_SITD */
-+ struct ehci_fstn *fstn; /* Q_TYPE_FSTN */
-+ __le32 *hw_next; /* (all types) */
-+ void *ptr;
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * EHCI Specification 0.95 Section 3.6
-+ * QH: describes control/bulk/interrupt endpoints
-+ * See Fig 3-7 "Queue Head Structure Layout".
-+ *
-+ * These appear in both the async and (for interrupt) periodic schedules.
-+ */
-+
-+struct ehci_qh {
-+ /* first part defined by EHCI spec */
-+ __le32 hw_next; /* see EHCI 3.6.1 */
-+ __le32 hw_info1; /* see EHCI 3.6.2 */
-+#define QH_HEAD 0x00008000
-+ __le32 hw_info2; /* see EHCI 3.6.2 */
-+#define QH_SMASK 0x000000ff
-+#define QH_CMASK 0x0000ff00
-+#define QH_HUBADDR 0x007f0000
-+#define QH_HUBPORT 0x3f800000
-+#define QH_MULT 0xc0000000
-+ __le32 hw_current; /* qtd list - see EHCI 3.6.4 */
-+
-+ /* qtd overlay (hardware parts of a struct ehci_qtd) */
-+ __le32 hw_qtd_next;
-+ __le32 hw_alt_next;
-+ __le32 hw_token;
-+ __le32 hw_buf [5];
-+ __le32 hw_buf_hi [5];
-+
-+ /* the rest is HCD-private */
-+ dma_addr_t qh_dma; /* address of qh */
-+ union ehci_shadow qh_next; /* ptr to qh; or periodic */
-+ struct list_head qtd_list; /* sw qtd list */
-+ struct ehci_qtd *dummy;
-+ struct ehci_qh *reclaim; /* next to reclaim */
-+
-+ struct ehci_hcd *ehci;
-+ struct kref kref;
-+ unsigned stamp;
-+
-+ u8 qh_state;
-+#define QH_STATE_LINKED 1 /* HC sees this */
-+#define QH_STATE_UNLINK 2 /* HC may still see this */
-+#define QH_STATE_IDLE 3 /* HC doesn't see this */
-+#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */
-+#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
-+
-+ /* periodic schedule info */
-+ u8 usecs; /* intr bandwidth */
-+ u8 gap_uf; /* uframes split/csplit gap */
-+ u8 c_usecs; /* ... split completion bw */
-+ u16 tt_usecs; /* tt downstream bandwidth */
-+ unsigned short period; /* polling interval */
-+ unsigned short start; /* where polling starts */
-+#define NO_FRAME ((unsigned short)~0) /* pick new start */
-+ struct usb_device *dev; /* access to TT */
-+} __attribute__ ((aligned (32)));
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* description of one iso transaction (up to 3 KB data if highspeed) */
-+struct ehci_iso_packet {
-+ /* These will be copied to iTD when scheduling */
-+ u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
-+ __le32 transaction; /* itd->hw_transaction[i] |= */
-+ u8 cross; /* buf crosses pages */
-+ /* for full speed OUT splits */
-+ u32 buf1;
-+};
-+
-+/* temporary schedule data for packets from iso urbs (both speeds)
-+ * each packet is one logical usb transaction to the device (not TT),
-+ * beginning at stream->next_uframe
-+ */
-+struct ehci_iso_sched {
-+ struct list_head td_list;
-+ unsigned span;
-+ struct ehci_iso_packet packet [0];
-+};
-+
-+/*
-+ * ehci_iso_stream - groups all (s)itds for this endpoint.
-+ * acts like a qh would, if EHCI had them for ISO.
-+ */
-+struct ehci_iso_stream {
-+ /* first two fields match QH, but info1 == 0 */
-+ __le32 hw_next;
-+ __le32 hw_info1;
-+
-+ u32 refcount;
-+ u8 bEndpointAddress;
-+ u8 highspeed;
-+ u16 depth; /* depth in uframes */
-+ struct list_head td_list; /* queued itds/sitds */
-+ struct list_head free_list; /* list of unused itds/sitds */
-+ struct usb_device *udev;
-+ struct usb_host_endpoint *ep;
-+
-+ /* output of (re)scheduling */
-+ unsigned long start; /* jiffies */
-+ unsigned long rescheduled;
-+ int next_uframe;
-+ __le32 splits;
-+
-+ /* the rest is derived from the endpoint descriptor,
-+ * trusting urb->interval == f(epdesc->bInterval) and
-+ * including the extra info for hw_bufp[0..2]
-+ */
-+ u8 interval;
-+ u8 usecs, c_usecs;
-+ u16 tt_usecs;
-+ u16 maxp;
-+ u16 raw_mask;
-+ unsigned bandwidth;
-+
-+ /* This is used to initialize iTD's hw_bufp fields */
-+ __le32 buf0;
-+ __le32 buf1;
-+ __le32 buf2;
-+
-+ /* this is used to initialize sITD's tt info */
-+ __le32 address;
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * EHCI Specification 0.95 Section 3.3
-+ * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
-+ *
-+ * Schedule records for high speed iso xfers
-+ */
-+struct ehci_itd {
-+ /* first part defined by EHCI spec */
-+ __le32 hw_next; /* see EHCI 3.3.1 */
-+ __le32 hw_transaction [8]; /* see EHCI 3.3.2 */
-+#define EHCI_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
-+#define EHCI_ISOC_BUF_ERR (1<<30) /* Data buffer error */
-+#define EHCI_ISOC_BABBLE (1<<29) /* babble detected */
-+#define EHCI_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
-+#define EHCI_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
-+#define EHCI_ITD_IOC (1 << 15) /* interrupt on complete */
-+
-+#define ITD_ACTIVE __constant_cpu_to_le32(EHCI_ISOC_ACTIVE)
-+
-+ __le32 hw_bufp [7]; /* see EHCI 3.3.3 */
-+ __le32 hw_bufp_hi [7]; /* Appendix B */
-+
-+ /* the rest is HCD-private */
-+ dma_addr_t itd_dma; /* for this itd */
-+ union ehci_shadow itd_next; /* ptr to periodic q entry */
-+
-+ struct urb *urb;
-+ struct ehci_iso_stream *stream; /* endpoint's queue */
-+ struct list_head itd_list; /* list of stream's itds */
-+
-+ /* any/all hw_transactions here may be used by that urb */
-+ unsigned frame; /* where scheduled */
-+ unsigned pg;
-+ unsigned index[8]; /* in urb->iso_frame_desc */
-+ u8 usecs[8];
-+} __attribute__ ((aligned (32)));
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * EHCI Specification 0.95 Section 3.4
-+ * siTD, aka split-transaction isochronous Transfer Descriptor
-+ * ... describe full speed iso xfers through TT in hubs
-+ * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
-+ */
-+struct ehci_sitd {
-+ /* first part defined by EHCI spec */
-+ __le32 hw_next;
-+/* uses bit field macros above - see EHCI 0.95 Table 3-8 */
-+ __le32 hw_fullspeed_ep; /* EHCI table 3-9 */
-+ __le32 hw_uframe; /* EHCI table 3-10 */
-+ __le32 hw_results; /* EHCI table 3-11 */
-+#define SITD_IOC (1 << 31) /* interrupt on completion */
-+#define SITD_PAGE (1 << 30) /* buffer 0/1 */
-+#define SITD_LENGTH(x) (0x3ff & ((x)>>16))
-+#define SITD_STS_ACTIVE (1 << 7) /* HC may execute this */
-+#define SITD_STS_ERR (1 << 6) /* error from TT */
-+#define SITD_STS_DBE (1 << 5) /* data buffer error (in HC) */
-+#define SITD_STS_BABBLE (1 << 4) /* device was babbling */
-+#define SITD_STS_XACT (1 << 3) /* illegal IN response */
-+#define SITD_STS_MMF (1 << 2) /* incomplete split transaction */
-+#define SITD_STS_STS (1 << 1) /* split transaction state */
-+
-+#define SITD_ACTIVE __constant_cpu_to_le32(SITD_STS_ACTIVE)
-+
-+ __le32 hw_buf [2]; /* EHCI table 3-12 */
-+ __le32 hw_backpointer; /* EHCI table 3-13 */
-+ __le32 hw_buf_hi [2]; /* Appendix B */
-+
-+ /* the rest is HCD-private */
-+ dma_addr_t sitd_dma;
-+ union ehci_shadow sitd_next; /* ptr to periodic q entry */
-+
-+ struct urb *urb;
-+ struct ehci_iso_stream *stream; /* endpoint's queue */
-+ struct list_head sitd_list; /* list of stream's sitds */
-+ unsigned frame;
-+ unsigned index;
-+} __attribute__ ((aligned (32)));
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * EHCI Specification 0.96 Section 3.7
-+ * Periodic Frame Span Traversal Node (FSTN)
-+ *
-+ * Manages split interrupt transactions (using TT) that span frame boundaries
-+ * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
-+ * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
-+ * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
-+ */
-+struct ehci_fstn {
-+ __le32 hw_next; /* any periodic q entry */
-+ __le32 hw_prev; /* qh or EHCI_LIST_END */
-+
-+ /* the rest is HCD-private */
-+ dma_addr_t fstn_dma;
-+ union ehci_shadow fstn_next; /* ptr to periodic q entry */
-+} __attribute__ ((aligned (32)));
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
-+
-+/*
-+ * Some EHCI controllers have a Transaction Translator built into the
-+ * root hub. This is a non-standard feature. Each controller will need
-+ * to add code to the following inline functions, and call them as
-+ * needed (mostly in root hub code).
-+ */
-+
-+#define ehci_is_TDI(e) ((e)->is_tdi_rh_tt)
-+
-+/* Returns the speed of a device attached to a port on the root hub. */
-+static inline unsigned int
-+ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
-+{
-+ if (ehci_is_TDI(ehci)) {
-+ switch ((portsc>>26)&3) {
-+ case 0:
-+ return 0;
-+ case 1:
-+ return (1<<USB_PORT_FEAT_LOWSPEED);
-+ case 2:
-+ default:
-+ return (1<<USB_PORT_FEAT_HIGHSPEED);
-+ }
-+ }
-+ return (1<<USB_PORT_FEAT_HIGHSPEED);
-+}
-+
-+#else
-+
-+#define ehci_is_TDI(e) (0)
-+
-+#define ehci_port_speed(ehci, portsc) (1<<USB_PORT_FEAT_HIGHSPEED)
-+#endif
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#ifdef CONFIG_PPC_83xx
-+/* Some Freescale processors have an erratum in which the TT
-+ * port number in the queue head was 0..N-1 instead of 1..N.
-+ */
-+#define ehci_has_fsl_portno_bug(e) ((e)->has_fsl_port_bug)
-+#else
-+#define ehci_has_fsl_portno_bug(e) (0)
-+#endif
-+
-+/*
-+ * While most USB host controllers implement their registers in
-+ * little-endian format, a minority (celleb companion chip) implement
-+ * them in big endian format.
-+ *
-+ * This attempts to support either format at compile time without a
-+ * runtime penalty, or both formats with the additional overhead
-+ * of checking a flag bit.
-+ */
-+
-+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
-+#define ehci_big_endian_mmio(e) ((e)->big_endian_mmio)
-+#else
-+#define ehci_big_endian_mmio(e) 0
-+#endif
-+
-+static inline unsigned int ehci_readl (const struct ehci_hcd *ehci,
-+ __u32 __iomem * regs)
-+{
-+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
-+ return ehci_big_endian_mmio(ehci) ?
-+ readl_be(regs) :
-+ readl(regs);
-+#else
-+ return readl(regs);
-+#endif
-+}
-+
-+static inline void ehci_writel (const struct ehci_hcd *ehci,
-+ const unsigned int val, __u32 __iomem *regs)
-+{
-+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
-+ ehci_big_endian_mmio(ehci) ?
-+ writel_be(val, regs) :
-+ writel(val, regs);
-+#else
-+ writel(val, regs);
-+#endif
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#ifndef DEBUG
-+#define STUB_DEBUG_FILES
-+#endif /* DEBUG */
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#endif /* __LINUX_EHCI_HCD_H */
diff -Nur linux-2.6.21.1/include/asm-mips/bootinfo.h linux-2.6.21.1-owrt/include/asm-mips/bootinfo.h
--- linux-2.6.21.1/include/asm-mips/bootinfo.h 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/include/asm-mips/bootinfo.h 2007-05-23 23:34:01.000000000 +0200