ramips: add support for Belkin F5D8235 v2 board

No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73

7 files changed, 164 insertions, 0 deletions

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 286323fe1..d0aaa6b9c 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -21,6 +21,7 @@ enum ramips_mach_type {
 	RAMIPS_MACH_DIR_300_REVB,	/* D-Link DIR-300 rev B */
 
 	/* RT3052 based machines */
+	RAMIPS_MACH_F5D8235_V2,         /* Belkin F5D8235 v2 */
 	RAMIPS_MACH_PWH2004,		/* Prolink 2004H / Abocom 5205 */
 	RAMIPS_MACH_WCR150GN,		/* Sparklan WCR-150GN */
 	RAMIPS_MACH_V22RW_2X2,		/* Ralink AP-RT3052-V22RW-2X2 */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index f50328b10..d4087aef4 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -2,6 +2,12 @@ if RALINK_RT305X
 
 menu "Ralink RT350x machine selection"
 
+config RT305X_MACH_F5D8235_V2
+	bool "Belkin F5D8235 v2 support"
+	default y
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_WHR_G300N
 	bool "Buffalo WHR-G300N support"
 	default y
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 75f65700b..a18a03500 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -11,6 +11,7 @@ obj-y	:= irq.o setup.o devices.o rt305x.o
 
 obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
 
+obj-$(CONFIG_RT305X_MACH_F5D8235_V2)    += mach-f5d8235-v2.o
 obj-$(CONFIG_RT305X_MACH_DIR_300_REVB)	+= mach-dir-300-revb.o
 obj-$(CONFIG_RT305X_MACH_V22RW_2X2)	+= mach-v22rw-2x2.o
 obj-$(CONFIG_RT305X_MACH_WCR150GN)	+= mach-wcr150gn.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c
new file mode 100644
index 000000000..6a400424c
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c
@@ -0,0 +1,141 @@
+/*
+ *  Belkin F5D8235 v2 board support
+ *
+ *  Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <linux/rtl8366rb.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define F5D8235_V2_GPIO_LED_INTERNET_BLUE	5
+#define F5D8235_V2_GPIO_LED_INTERNET_AMBER	6
+#define F5D8235_V2_GPIO_LED_MODEM_BLUE		11
+#define F5D8235_V2_GPIO_LED_MODEM_AMBER		8
+#define F5D8235_V2_GPIO_LED_ROUTER		9
+#define F5D8235_V2_GPIO_LED_STORAGE_BLUE	23
+#define F5D8235_V2_GPIO_LED_STORAGE_AMBER	22
+#define F5D8235_V2_GPIO_LED_SECURITY_BLUE	13
+#define F5D8235_V2_GPIO_LED_SECURITY_AMBER	12
+
+static struct gpio_led f5d8235v2_leds_gpio[] __initdata = {
+        {
+                .name           = "f5d8235v2:blue:internet",
+                .gpio           = F5D8235_V2_GPIO_LED_INTERNET_BLUE,
+                .active_low     = 1,
+        }, {
+                .name           = "f5d8235v2:amber:internet",
+                .gpio           = F5D8235_V2_GPIO_LED_INTERNET_AMBER,
+                .active_low     = 1,
+        }, {
+                .name           = "f5d8235v2:blue:modem",
+                .gpio           = F5D8235_V2_GPIO_LED_MODEM_BLUE,
+                .active_low     = 1,
+        }, {
+                .name           = "f5d8235v2:amber:modem",
+                .gpio           = F5D8235_V2_GPIO_LED_MODEM_AMBER,
+                .active_low     = 1,
+        }, {
+                .name           = "f5d8235v2:blue:router",
+                .gpio           = F5D8235_V2_GPIO_LED_ROUTER,
+                .active_low     = 1,
+        }, {
+                .name           = "f5d8235v2:blue:storage",
+                .gpio           = F5D8235_V2_GPIO_LED_STORAGE_BLUE,
+                .active_low     = 1,
+        }, {
+                .name           = "f5d8235v2:amber:storage",
+                .gpio           = F5D8235_V2_GPIO_LED_STORAGE_AMBER,
+                .active_low     = 1,
+        }, {
+                .name           = "f5d8235v2:blue:security",
+                .gpio           = F5D8235_V2_GPIO_LED_SECURITY_BLUE,
+                .active_low     = 1,
+        }, {
+                .name           = "f5d8235v2:amber:security",
+                .gpio           = F5D8235_V2_GPIO_LED_SECURITY_AMBER,
+                .active_low     = 1,
+        }
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition f5d8235v2_partitions[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 0x050000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel and rootfs",
+		.offset	= 0x050000,
+		.size	= 0x790000,
+	}, {
+		.name	= "rootfs",
+		.offset	= 0x1D0000,
+		.size	= 0x610000,
+	}, {
+		.name	= "nvram",
+		.offset	= 0x7E0000,
+		.size	= 0x010000,
+	}, {
+		.name	= "factory",
+		.offset	= 0x7F0000,
+		.size	= 0x010000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data f5d8235v2_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(f5d8235v2_partitions),
+	.parts		= f5d8235v2_partitions,
+#endif
+};
+
+
+static struct rtl8366rb_platform_data f5d8235v2_switch_data = {
+	.gpio_sda        = RT305X_GPIO_I2C_SD,
+	.gpio_sck        = RT305X_GPIO_I2C_SCLK,
+};
+
+static struct platform_device f5d8235v2_switch = {
+        .name           = RTL8366RB_DRIVER_NAME,
+	.id		= -1,
+        .dev		= {
+	    .platform_data = &f5d8235v2_switch_data,
+        }
+};
+
+static void __init f5d8235v2_init(void)
+{
+	rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
+					RT305X_GPIO_MODE_UART0_SHIFT) |
+					RT305X_GPIO_MODE_I2C |
+					RT305X_GPIO_MODE_SPI |
+					RT305X_GPIO_MODE_MDIO);
+	rt305x_register_flash(0, &f5d8235v2_flash_data);
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235v2_leds_gpio),
+						f5d8235v2_leds_gpio);
+	rt305x_register_ethernet();
+	platform_device_register(&f5d8235v2_switch);
+	rt305x_register_wifi();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_F5D8235_V2, "F5D8235_V2", "Belkin F5D8235 v2",
+	     f5d8235v2_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index acd328317..79809de9f 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -113,6 +113,18 @@ define Image/Build/Profile/WCR150GN
 endef
 
 
+mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
+mtd_f5d8235_kernel_part_size=1572864
+mtd_f5d8235_rootfs_part_size=6356992
+define Image/Build/Template/F5D8235V2
+	$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
+endef
+
+define Image/Build/Profile/F5D8235V2
+	$(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
+endef
+
+
 ifeq ($(CONFIG_RALINK_RT305X),y)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/DIR300B1,$(1))
@@ -121,6 +133,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/PWH2004,$(1))
 	$(call Image/Build/Profile/WHRG300N,$(1))
 	$(call Image/Build/Profile/WCR150GN,$(1))
+	$(call Image/Build/Profile/F5D8235V2,$(1))
 endef
 endif
 
diff --git a/target/linux/ramips/rt305x/config-2.6.32 b/target/linux/ramips/rt305x/config-2.6.32
index 1d29c914f..05388b296 100644
--- a/target/linux/ramips/rt305x/config-2.6.32
+++ b/target/linux/ramips/rt305x/config-2.6.32
@@ -117,6 +117,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
 # CONFIG_RALINK_RT288X is not set
 CONFIG_RALINK_RT305X=y
 CONFIG_RT305X_MACH_DIR_300_REVB=y
+CONFIG_RT305X_MACH_F5D8235_V2=y
 CONFIG_RT305X_MACH_FONERA20N=y
 CONFIG_RT305X_MACH_V22RW_2X2=y
 CONFIG_RT305X_MACH_PWH2004=y
diff --git a/target/linux/ramips/rt305x/config-2.6.34 b/target/linux/ramips/rt305x/config-2.6.34
index 91b7e5642..b677856b6 100644
--- a/target/linux/ramips/rt305x/config-2.6.34
+++ b/target/linux/ramips/rt305x/config-2.6.34
@@ -127,6 +127,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
 # CONFIG_RALINK_RT288X is not set
 CONFIG_RALINK_RT305X=y
 CONFIG_RT305X_MACH_DIR_300_REVB=y
+CONFIG_RT305X_MACH_F5D8235_V2=y
 CONFIG_RT305X_MACH_FONERA20N=y
 CONFIG_RT305X_MACH_V22RW_2X2=y
 CONFIG_RT305X_MACH_PWH2004=y