ar71xx: add support for the WNDR3700v2 board

Based on a patch by Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25118 3c298f89-4303-0410-b956-a3cf2f4a3e73

7 files changed, 158 insertions, 10 deletions

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network
new file mode 100644
index 000000000..d05fdf342
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network
@@ -0,0 +1,69 @@
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0.1
+	option type	bridge
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
+config interface wan
+	option ifname	eth1
+	option proto	dhcp
+
+config switch
+	option name	rtl8366s
+	option reset	1
+	option enable_vlan 1
+	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+	option blinkrate	2
+
+config switch_vlan
+	option device	rtl8366s
+	option vlan 	1
+	option ports	"0 1 2 3 5t"
+
+config switch_port
+	# Port 1 controls the GREEN configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+	# 14: Link (master); 15: separate register
+
+	option device		rtl8366s
+	option port		1
+	option led		6
+
+config switch_port
+	# Port 2 controls the ORANGE configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	
+	option device		rtl8366s
+	option port		2
+	option led		9
+
+config switch_port                                              
+	# Port 5 controls the configuration of the WAN LED and the
+	# section does not correspond to a real switch port.
+	#
+	# To toggle the use of green or orange LEDs for the WAN port,
+	# see the LED setting for wndr3700:green:wan in /etc/config/system.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+
+	option device		rtl8366s
+	option port		5
+	option led		2
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 23370446a..dd47cf33b 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -105,7 +105,7 @@ get_status_led() {
 	unifi)
 		status_led="ubnt:green:dome"
 		;;
-	wndr3700)
+	wndr3700 | wndr3700v2)
 		status_led="wndr3700:green:power"
 		;;
 	wnr2000)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 b/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700
index a893a0ec1..77fd05738 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700
@@ -23,6 +23,6 @@ commit system
 EOF
 }
 
-if [ "${board}" == "wndr3700" ]; then
+if [ "${board}" == "wndr3700" -o "${board}" == "wndr3700v2" ]; then
 	wndr3700_set_wan_led
 fi
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index c08860542..d390f9fdf 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -130,6 +130,9 @@ ar71xx_board_name() {
 	*WNDR3700)
 		name="wndr3700"
 		;;
+	*WNDR3700v2)
+		name="wndr3700v2"
+		;;
 	*WNR2000)
 		name="wnr2000"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 0b867c005..067fe033f 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -64,6 +64,7 @@ platform_do_upgrade_combined() {
 platform_check_image() {
 	local board=$(ar71xx_board_name)
 	local magic="$(get_magic_word "$1")"
+	local magic_long="$(get_magic_long "$1")"
 
 	[ "$ARGC" -gt 1 ] && return 1
 
@@ -83,7 +84,14 @@ platform_check_image() {
 		return 0
 		;;
 	wndr3700)
-		[ "$magic" != "3337" ] && {
+		[ "$magic_long" != "33373030" ] && {
+			echo "Invalid image type."
+			return 1
+		}
+		return 0
+		;;
+	wndr3700v2)
+		[ "$magic_long" != "33373031" ] && {
 			echo "Invalid image type."
 			return 1
 		}
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
index 7b1ee90ae..f0b781955 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
@@ -96,14 +96,64 @@ static struct mtd_partition wndr3700_partitions[] = {
 		.mask_flags	= MTD_WRITEABLE,
 	}
 };
-#endif /* CONFIG_MTD_PARTITIONS */
 
-static struct flash_platform_data wndr3700_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
-	.parts		= wndr3700_partitions,
-	.nr_parts	= ARRAY_SIZE(wndr3700_partitions),
-#endif
+static struct mtd_partition wndr3700v2_partitions[] = {
+	{
+		.name		= "uboot",
+		.offset		= 0,
+		.size		= 0x050000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "env",
+		.offset		= 0x050000,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "rootfs",
+		.offset		= 0x070000,
+		.size		= 0xe40000,
+	}, {
+		.name		= "config",
+		.offset		= 0xeb0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "config_bak",
+		.offset		= 0xec0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "pot",
+		.offset		= 0xed0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "traffic_meter",
+		.offset		= 0xee0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "language",
+		.offset		= 0xef0000,
+		.size		= 0x100000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "caldata",
+		.offset		= 0xff0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
 };
+#define wndr3700_num_partitions		ARRAY_SIZE(wndr3700_partitions)
+#define wndr3700v2_num_partitions	ARRAY_SIZE(wndr3700v2_partitions)
+#else
+#define wndr3700_partitions		NULL
+#define wndr3700_num_partitions		0
+#define wndr3700v2_partitions		NULL
+#define wndr3700v2_num_partitions	0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data wndr3700_flash_data;
 
 static struct gpio_led wndr3700_leds_gpio[] __initdata = {
 	{
@@ -167,7 +217,7 @@ static struct platform_device wndr3700_rtl8366s_device = {
 	}
 };
 
-static void __init wndr3700_setup(void)
+static void __init wndr3700_common_setup(void)
 {
 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 
@@ -218,5 +268,22 @@ static void __init wndr3700_setup(void)
 		      art + WNDR3700_WMAC1_MAC_OFFSET);
 }
 
+static void __init wndr3700_setup(void)
+{
+	wndr3700_flash_data.parts = wndr3700_partitions,
+	wndr3700_flash_data.nr_parts = wndr3700_num_partitions,
+	wndr3700_common_setup();
+}
+
 MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", "NETGEAR WNDR3700",
 	     wndr3700_setup);
+
+static void __init wndr3700v2_setup(void)
+{
+	wndr3700_flash_data.parts = wndr3700v2_partitions,
+	wndr3700_flash_data.nr_parts = wndr3700v2_num_partitions,
+	wndr3700_common_setup();
+}
+
+MIPS_MACHINE(AR71XX_MACH_WNDR3700V2, "WNDR3700v2", "NETGEAR WNDR3700v2",
+	     wndr3700v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
index 2a233d79f..40f1b0902 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
@@ -54,6 +54,7 @@ enum ar71xx_mach_type {
 	AR71XX_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
 	AR71XX_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
 	AR71XX_MACH_WNDR3700,	/* NETGEAR WNDR3700 */
+	AR71XX_MACH_WNDR3700V2,	/* NETGEAR WNDR3700v2 */
 	AR71XX_MACH_WNR2000,	/* NETGEAR WNR2000 */
 	AR71XX_MACH_WP543,	/* Compex WP543 */
 	AR71XX_MACH_WRT160NL,	/* Linksys WRT160NL */