[adm5120] restore support for Infineon's EASY 5120 boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8021 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 94 insertions, 20 deletions

diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c
index ca377d1af..e1426cca9 100644
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c
@@ -44,7 +44,19 @@ static void switch_bank_gpio3(unsigned bank)
 	}
 }
 
-static struct mtd_partition easy83000_partitions[] = {
+static void switch_bank_gpio5(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN5, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN5, 1);
+		break;
+	}
+}
+
+static struct mtd_partition easy_partitions[] = {
 	{
 		.name	= "admboot",
 		.offset	= 0,
@@ -61,27 +73,83 @@ static struct mtd_partition easy83000_partitions[] = {
 	}
 };
 
+static struct platform_device *easy5120pata_devices[] __initdata = {
+	&adm5120_flash0_device,
+	/* TODO: add VINETIC2 device? */
+};
+
+static struct platform_device *easy5120rt_devices[] __initdata = {
+	&adm5120_flash0_device,
+	&adm5120_usbc_device
+};
+
+static struct platform_device *easy5120wvoip_devices[] __initdata = {
+	&adm5120_flash0_device,
+	/* TODO: add VINETIC2 device? */
+};
+
 static struct platform_device *easy83000_devices[] __initdata = {
 	&adm5120_flash0_device,
+	/* TODO: add VINAX device? */
 };
 
-static void __init easy83000_setup(void)
+static void __init easy_setup_pqfp(void)
 {
 	gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */
 	gpio_direction_output(ADM5120_GPIO_PIN3, 0);
 
 	/* setup data for flash0 device */
 	adm5120_flash0_data.switch_bank = switch_bank_gpio3;
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy83000_partitions);
-	adm5120_flash0_data.parts = easy83000_partitions;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
+	adm5120_flash0_data.parts = easy_partitions;
+
+	/* TODO: setup mac addresses */
+}
+
+static void __init easy_setup_bga(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
+	adm5120_flash0_data.parts = easy_partitions;
 
 	/* TODO: setup mac addresses */
 }
 
+static struct adm5120_board easy5120pata_board __initdata = {
+	.mach_type	= MACH_ADM5120_EASY5120PATA,
+	.name		= "Infineon EASY 5120P-ATA Reference Board",
+	.board_setup	= easy_setup_pqfp,
+	.num_eth_ports	= 6,
+	.num_devices	= ARRAY_SIZE(easy5120pata_devices),
+	.devices	= easy5120pata_devices,
+};
+
+static struct adm5120_board easy5120rt_board __initdata = {
+	.mach_type	= MACH_ADM5120_EASY5120RT,
+	.name		= "Infineon EASY 5120-RT Reference Board",
+	.board_setup	= easy_setup_bga,
+	.num_eth_ports	= 5,
+	.num_devices	= ARRAY_SIZE(easy5120rt_devices),
+	.devices	= easy5120rt_devices,
+};
+
+static struct adm5120_board easy5120wvoip_board __initdata = {
+	.mach_type	= MACH_ADM5120_EASY5120WVOIP,
+	.name		= "Infineon EASY 5120-WVoIP Reference Board",
+	.board_setup	= easy_setup_bga,
+	.num_eth_ports	= 6,
+	.num_devices	= ARRAY_SIZE(easy5120wvoip_devices),
+	.devices	= easy5120wvoip_devices,
+};
+
 static struct adm5120_board easy83000_board __initdata = {
 	.mach_type	= MACH_ADM5120_EASY83000,
-	.name		= "Infineon EASY-83000",
-	.board_setup	= easy83000_setup,
+	.name		= "Infineon EASY 83000 Reference Board",
+	.board_setup	= easy_setup_pqfp,
 	.num_eth_ports	= 6,
 	.num_devices	= ARRAY_SIZE(easy83000_devices),
 	.devices	= easy83000_devices,
@@ -89,6 +157,9 @@ static struct adm5120_board easy83000_board __initdata = {
 
 static int __init register_boards(void)
 {
+	adm5120_board_register(&easy5120pata_board);
+	adm5120_board_register(&easy5120rt_board);
+	adm5120_board_register(&easy5120wvoip_board);
 	adm5120_board_register(&easy83000_board);
 	return 0;
 }
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c
index db8037f3b..c14c17229 100644
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c
@@ -62,9 +62,9 @@ static struct board_desc common_boards[] __initdata = {
 	DEFBOARD("BR-6104K",		MACH_ADM5120_BR6104K),
 	DEFBOARD("BR-6104KP",		MACH_ADM5120_BR6104K),
 	/* Infineon boards */
-	DEFBOARD("EASY 5120",		MACH_ADM5120_EASY5120),
-	DEFBOARD("EASY 5120-RT",	MACH_ADM5120_EASY5120RT),
 	DEFBOARD("EASY 5120P-ATA",	MACH_ADM5120_EASY5120PATA),
+	DEFBOARD("EASY 5120-RT",	MACH_ADM5120_EASY5120RT),
+	DEFBOARD("EASY 5120-WVoIP",	MACH_ADM5120_EASY5120WVOIP),
 	DEFBOARD("EASY 83000",		MACH_ADM5120_EASY83000),
 	/* Mikrotik RouterBOARDs */
 	DEFBOARD("111",			MACH_ADM5120_RB_111),
diff --git a/target/linux/adm5120-2.6/image/Makefile b/target/linux/adm5120-2.6/image/Makefile
index bf4ca5711..d76e1e1fe 100644
--- a/target/linux/adm5120-2.6/image/Makefile
+++ b/target/linux/adm5120-2.6/image/Makefile
@@ -105,9 +105,9 @@ ifeq ($(CONFIG_DEVEL),y)
 	$(call Image/Build/Edimax,$(1),ps-3205uwg,$(patsubst jffs2-%,jffs2,$(1)),PS-3205UWg)
 	$(call Image/Build/Edimax,$(1),br-6524wg,$(patsubst jffs2-%,jffs2,$(1)),BR-6524WG)
 	$(call Image/Build/Edimax,$(1),br-6524wp,$(patsubst jffs2-%,jffs2,$(1)),BR-6524WP)
-	$(call Image/Build/Infineon,$(1),easy-5120,$(patsubst jffs2-%,jffs2,$(1)))
-	$(call Image/Build/Infineon,$(1),easy-5120-rt,$(patsubst jffs2-%,jffs2,$(1)))
 	$(call Image/Build/Infineon,$(1),easy-5120p-ata,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Infineon,$(1),easy-5120-rt,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Infineon,$(1),easy-5120-wvoip,$(patsubst jffs2-%,jffs2,$(1)))
 	$(call Image/Build/Infineon,$(1),easy-83000,$(patsubst jffs2-%,jffs2,$(1)))
 	$(call Image/Build/MyLoader,$(1),np27g,$(patsubst jffs2-%,jffs2,$(1)),NP27G)
 	$(call Image/Build/MyLoader,$(1),np28g,$(patsubst jffs2-%,jffs2,$(1)),NP28G)
diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/config.h b/target/linux/adm5120-2.6/image/lzma-loader/src/config.h
index b90fcfbe9..f8bb8e2cc 100644
--- a/target/linux/adm5120-2.6/image/lzma-loader/src/config.h
+++ b/target/linux/adm5120-2.6/image/lzma-loader/src/config.h
@@ -64,16 +64,19 @@
 /*
  * Infineon boards
  */
-#if defined(CONFIG_BOARD_EASY5120)
-#  define CONFIG_BOARD_NAME	"EASY 5120"
+#if defined(CONFIG_BOARD_EASY5120PATA)
+#  define CONFIG_BOARD_NAME	"EASY 5120P-ATA"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
 #endif
 
 #if defined(CONFIG_BOARD_EASY5120RT)
 #  define CONFIG_BOARD_NAME	"EASY 5120-RT"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
 #endif
 
-#if defined(CONFIG_BOARD_EASY5120PATA)
-#  define CONFIG_BOARD_NAME	"EASY 5120P-ATA"
+#if defined(CONFIG_BOARD_EASY5120WVOIP)
+#  define CONFIG_BOARD_NAME	"EASY 5120-WVOIP"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
 #endif
 
 #if defined(CONFIG_BOARD_EASY83000)
@@ -105,4 +108,4 @@
 #  define CONFIG_FLASH_SIZE	FLASH_2M
 #endif
 
-#endif /* _CONFIG_H_ */
\ No newline at end of file
+#endif /* _CONFIG_H_ */
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch b/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
index cc2a88ed5..14cb612b0 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
@@ -103,11 +103,11 @@ Index: linux-2.6.22.1/include/asm-mips/bootinfo.h
 +#define MACH_ADM5120_CAS861	39	/* Cellvision CAS-861/861W */
 +#define MACH_ADM5120_NFS101U	40	/* Cellvision NFS-101U/101WU */
 +#define MACH_ADM5120_NFS202U	41	/* Cellvision NFS-202U/202WU */
-+#define MACH_ADM5120_EASY5120	43	/* Infineon EASY 5120 */
-+#define MACH_ADM5120_EASY5120RT 44	/* Infineon EASY 5120-RT */
-+#define MACH_ADM5120_EASY5120PATA 45	/* Infineon EASY 5120P-ATA */
-+#define MACH_ADM5120_EASY83000	46	/* Infineon EASY-83000 */
-+#define MACH_ADM5120_BR6104K	47	/* Edimax BR-6104K */
++#define MACH_ADM5120_EASY5120PATA 42	/* Infineon EASY 5120P-ATA */
++#define MACH_ADM5120_EASY5120RT 43	/* Infineon EASY 5120-RT */
++#define MACH_ADM5120_EASY5120WVOIP 44	/* Infineon EASY 5120-WVoIP */
++#define MACH_ADM5120_EASY83000	45	/* Infineon EASY-83000 */
++#define MACH_ADM5120_BR6104K	46	/* Edimax BR-6104K */
 +
  #define CL_SIZE			COMMAND_LINE_SIZE