Add the 93cx6 patch to generic-2.6, correctly fix dependencies on the rt2x00 drivers (thanks to Daniel Gimpelevich)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8200 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 361 insertions, 2 deletions

diff --git a/target/linux/generic-2.6/config-2.6.22 b/target/linux/generic-2.6/config-2.6.22
index 578bbc544..bc715a3b6 100644
--- a/target/linux/generic-2.6/config-2.6.22
+++ b/target/linux/generic-2.6/config-2.6.22
@@ -286,6 +286,7 @@ CONFIG_E100=m
 # CONFIG_E1000 is not set
 # CONFIG_ECONET is not set
 # CONFIG_EEPRO100 is not set
+CONFIG_EEPROM_93CX6=y
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_ELF_CORE is not set
diff --git a/target/linux/generic-2.6/patches-2.6.22/000-eeprom_93cx6.patch b/target/linux/generic-2.6/patches-2.6.22/000-eeprom_93cx6.patch
new file mode 100644
index 000000000..ff23846b4
--- /dev/null
+++ b/target/linux/generic-2.6/patches-2.6.22/000-eeprom_93cx6.patch
@@ -0,0 +1,358 @@
+From: Ivo van Doorn <ivdoorn@gmail.com>
+Date: Fri, 11 May 2007 19:59:40 +0000 (-0400)
+Subject: [PATCH] Add 93cx6 eeprom library
+X-Git-Tag: v2.6.23-rc1~1201^2~74
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=9467d64b0e88763914c01f71ddf591b166c4f526
+
+[PATCH] Add 93cx6 eeprom library
+
+This patch adds a library for reading from 93cx6 eeproms.
+
+Signed-off-by: Michael Wu <flamingice@sourmilk.net>
+Signed-off-by: John W. Linville <linville@tuxdriver.com>
+---
+
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index 616eee9..bd601ef 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -34,6 +34,11 @@ config PHANTOM
+ 	  If you choose to build module, its name will be phantom. If unsure,
+ 	  say N here.
+ 
++config EEPROM_93CX6
++	tristate "EEPROM 93CX6 support"
++	---help---
++	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
++	  The driver supports both read as well as write commands.
+ 
+ 	  If unsure, say N.
+ 
+@@ -187,5 +192,4 @@ config THINKPAD_ACPI_BAY
+ 
+ 	  If you are not sure, say Y here.
+ 
+-
+ endmenu
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index 8abbf2f..b5ce0e3 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -14,3 +14,4 @@ obj-$(CONFIG_PHANTOM)		+= phantom.o
+ obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
+ obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
+ obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
++obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
+diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c
+new file mode 100644
+index 0000000..bfcb434
+--- /dev/null
++++ b/drivers/misc/eeprom_93cx6.c
+@@ -0,0 +1,229 @@
++/*
++	Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
++	<http://rt2x00.serialmonkey.com>
++
++	This program is free software; you can redistribute it and/or modify
++	it under the terms of the GNU General Public License as published by
++	the Free Software Foundation; either version 2 of the License, or
++	(at your option) any later version.
++
++	This program is distributed in the hope that it will be useful,
++	but WITHOUT ANY WARRANTY; without even the implied warranty of
++	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++	GNU General Public License for more details.
++
++	You should have received a copy of the GNU General Public License
++	along with this program; if not, write to the
++	Free Software Foundation, Inc.,
++	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++/*
++	Module: eeprom_93cx6
++	Abstract: EEPROM reader routines for 93cx6 chipsets.
++	Supported chipsets: 93c46 & 93c66.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/delay.h>
++#include <linux/eeprom_93cx6.h>
++
++MODULE_AUTHOR("http://rt2x00.serialmonkey.com");
++MODULE_VERSION("1.0");
++MODULE_DESCRIPTION("EEPROM 93cx6 chip driver");
++MODULE_LICENSE("GPL");
++
++static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
++{
++	eeprom->reg_data_clock = 1;
++	eeprom->register_write(eeprom);
++	udelay(1);
++}
++
++static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
++{
++	eeprom->reg_data_clock = 0;
++	eeprom->register_write(eeprom);
++	udelay(1);
++}
++
++static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom)
++{
++	/*
++	 * Clear all flags, and enable chip select.
++	 */
++	eeprom->register_read(eeprom);
++	eeprom->reg_data_in = 0;
++	eeprom->reg_data_out = 0;
++	eeprom->reg_data_clock = 0;
++	eeprom->reg_chip_select = 1;
++	eeprom->register_write(eeprom);
++
++	/*
++	 * kick a pulse.
++	 */
++	eeprom_93cx6_pulse_high(eeprom);
++	eeprom_93cx6_pulse_low(eeprom);
++}
++
++static void eeprom_93cx6_cleanup(struct eeprom_93cx6 *eeprom)
++{
++	/*
++	 * Clear chip_select and data_in flags.
++	 */
++	eeprom->register_read(eeprom);
++	eeprom->reg_data_in = 0;
++	eeprom->reg_chip_select = 0;
++	eeprom->register_write(eeprom);
++
++	/*
++	 * kick a pulse.
++	 */
++	eeprom_93cx6_pulse_high(eeprom);
++	eeprom_93cx6_pulse_low(eeprom);
++}
++
++static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom,
++	const u16 data, const u16 count)
++{
++	unsigned int i;
++
++	eeprom->register_read(eeprom);
++
++	/*
++	 * Clear data flags.
++	 */
++	eeprom->reg_data_in = 0;
++	eeprom->reg_data_out = 0;
++
++	/*
++	 * Start writing all bits.
++	 */
++	for (i = count; i > 0; i--) {
++		/*
++		 * Check if this bit needs to be set.
++		 */
++		eeprom->reg_data_in = !!(data & (1 << (i - 1)));
++
++		/*
++		 * Write the bit to the eeprom register.
++		 */
++		eeprom->register_write(eeprom);
++
++		/*
++		 * Kick a pulse.
++		 */
++		eeprom_93cx6_pulse_high(eeprom);
++		eeprom_93cx6_pulse_low(eeprom);
++	}
++
++	eeprom->reg_data_in = 0;
++	eeprom->register_write(eeprom);
++}
++
++static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom,
++	u16 *data, const u16 count)
++{
++	unsigned int i;
++	u16 buf = 0;
++
++	eeprom->register_read(eeprom);
++
++	/*
++	 * Clear data flags.
++	 */
++	eeprom->reg_data_in = 0;
++	eeprom->reg_data_out = 0;
++
++	/*
++	 * Start reading all bits.
++	 */
++	for (i = count; i > 0; i--) {
++		eeprom_93cx6_pulse_high(eeprom);
++
++		eeprom->register_read(eeprom);
++
++		/*
++		 * Clear data_in flag.
++		 */
++		eeprom->reg_data_in = 0;
++
++		/*
++		 * Read if the bit has been set.
++		 */
++		if (eeprom->reg_data_out)
++			buf |= (1 << (i - 1));
++
++		eeprom_93cx6_pulse_low(eeprom);
++	}
++
++	*data = buf;
++}
++
++/**
++ * eeprom_93cx6_read - Read multiple words from eeprom
++ * @eeprom: Pointer to eeprom structure
++ * @word: Word index from where we should start reading
++ * @data: target pointer where the information will have to be stored
++ *
++ * This function will read the eeprom data as host-endian word
++ * into the given data pointer.
++ */
++void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word,
++	u16 *data)
++{
++	u16 command;
++
++	/*
++	 * Initialize the eeprom register
++	 */
++	eeprom_93cx6_startup(eeprom);
++
++	/*
++	 * Select the read opcode and the word to be read.
++	 */
++	command = (PCI_EEPROM_READ_OPCODE << eeprom->width) | word;
++	eeprom_93cx6_write_bits(eeprom, command,
++		PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
++
++	/*
++	 * Read the requested 16 bits.
++	 */
++	eeprom_93cx6_read_bits(eeprom, data, 16);
++
++	/*
++	 * Cleanup eeprom register.
++	 */
++	eeprom_93cx6_cleanup(eeprom);
++}
++EXPORT_SYMBOL_GPL(eeprom_93cx6_read);
++
++/**
++ * eeprom_93cx6_multiread - Read multiple words from eeprom
++ * @eeprom: Pointer to eeprom structure
++ * @word: Word index from where we should start reading
++ * @data: target pointer where the information will have to be stored
++ * @words: Number of words that should be read.
++ *
++ * This function will read all requested words from the eeprom,
++ * this is done by calling eeprom_93cx6_read() multiple times.
++ * But with the additional change that while the eeprom_93cx6_read
++ * will return host ordered bytes, this method will return little
++ * endian words.
++ */
++void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word,
++	__le16 *data, const u16 words)
++{
++	unsigned int i;
++	u16 tmp;
++
++	for (i = 0; i < words; i++) {
++		tmp = 0;
++		eeprom_93cx6_read(eeprom, word + i, &tmp);
++		data[i] = cpu_to_le16(tmp);
++	}
++}
++EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
++
+diff --git a/include/linux/eeprom_93cx6.h b/include/linux/eeprom_93cx6.h
+new file mode 100644
+index 0000000..d774b77
+--- /dev/null
++++ b/include/linux/eeprom_93cx6.h
+@@ -0,0 +1,72 @@
++/*
++	Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
++	<http://rt2x00.serialmonkey.com>
++
++	This program is free software; you can redistribute it and/or modify
++	it under the terms of the GNU General Public License as published by
++	the Free Software Foundation; either version 2 of the License, or
++	(at your option) any later version.
++
++	This program is distributed in the hope that it will be useful,
++	but WITHOUT ANY WARRANTY; without even the implied warranty of
++	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++	GNU General Public License for more details.
++
++	You should have received a copy of the GNU General Public License
++	along with this program; if not, write to the
++	Free Software Foundation, Inc.,
++	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++/*
++	Module: eeprom_93cx6
++	Abstract: EEPROM reader datastructures for 93cx6 chipsets.
++	Supported chipsets: 93c46 & 93c66.
++ */
++
++/*
++ * EEPROM operation defines.
++ */
++#define PCI_EEPROM_WIDTH_93C46	6
++#define PCI_EEPROM_WIDTH_93C66	8
++#define PCI_EEPROM_WIDTH_OPCODE	3
++#define PCI_EEPROM_WRITE_OPCODE	0x05
++#define PCI_EEPROM_READ_OPCODE	0x06
++#define PCI_EEPROM_EWDS_OPCODE	0x10
++#define PCI_EEPROM_EWEN_OPCODE	0x13
++
++/**
++ * struct eeprom_93cx6 - control structure for setting the commands
++ * for reading the eeprom data.
++ * @data: private pointer for the driver.
++ * @register_read(struct eeprom_93cx6 *eeprom): handler to
++ * read the eeprom register, this function should set all reg_* fields.
++ * @register_write(struct eeprom_93cx6 *eeprom): handler to
++ * write to the eeprom register by using all reg_* fields.
++ * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines
++ * @reg_data_in: register field to indicate data input
++ * @reg_data_out: register field to indicate data output
++ * @reg_data_clock: register field to set the data clock
++ * @reg_chip_select: register field to set the chip select
++ *
++ * This structure is used for the communication between the driver
++ * and the eeprom_93cx6 handlers for reading the eeprom.
++ */
++struct eeprom_93cx6 {
++	void *data;
++
++	void (*register_read)(struct eeprom_93cx6 *eeprom);
++	void (*register_write)(struct eeprom_93cx6 *eeprom);
++
++	int width;
++
++	char reg_data_in;
++	char reg_data_out;
++	char reg_data_clock;
++	char reg_chip_select;
++};
++
++extern void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom,
++	const u8 word, u16 *data);
++extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom,
++	const u8 word, __le16 *data, const u16 words);
diff --git a/target/linux/rdc-2.6/Makefile b/target/linux/rdc-2.6/Makefile
index da05bd49c..dd4978181 100644
--- a/target/linux/rdc-2.6/Makefile
+++ b/target/linux/rdc-2.6/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 ARCH:=i386
 BOARD:=rdc
 BOARDNAME:=RDC x86
-FEATURES:=squashfs jffs2 pci broken
+FEATURES:=squashfs jffs2 broken
 
 LINUX_VERSION:=2.6.22.1
 
diff --git a/target/linux/rdc-2.6/config/default b/target/linux/rdc-2.6/config/default
index a053cbae3..b4f1090dc 100644
--- a/target/linux/rdc-2.6/config/default
+++ b/target/linux/rdc-2.6/config/default
@@ -228,7 +228,7 @@ CONFIG_PHYSICAL_START=0x100000
 # CONFIG_PNPACPI is not set
 CONFIG_QUICKLIST=y
 CONFIG_R6040=m
-CONFIG_R6040_NAPI=y
+# CONFIG_R6040_NAPI is not set
 # CONFIG_RELOCATABLE is not set
 # CONFIG_RTC is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y