fix Magicbox for .21 and convert to the new structure

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7328 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 566 insertions, 2683 deletions

diff --git a/target/linux/generic-2.6/config-template b/target/linux/generic-2.6/config-template
index 1c1d57077..d06096ee2 100644
--- a/target/linux/generic-2.6/config-template
+++ b/target/linux/generic-2.6/config-template
@@ -293,6 +293,7 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_FAT_FS=m
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FDDI is not set
 # CONFIG_FEALNX is not set
 CONFIG_FIB_RULES=y
@@ -339,6 +340,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_HWMON is not set
 # CONFIG_HWMON_VID is not set
 # CONFIG_HZ_1000 is not set
+# CONFIG_HZ_300 is not set
 # CONFIG_I2C_ALGOPCA is not set
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALI1535 is not set
@@ -623,6 +625,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_LSF is not set
 # CONFIG_LXT_PHY is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
 CONFIG_MAC_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_MARKEINS is not set
@@ -1107,6 +1110,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_UARTLITE is not set
 # CONFIG_SERIO is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_SGI_PARTITION is not set
diff --git a/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.c b/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.c
new file mode 100644
index 000000000..470fbc4e0
--- /dev/null
+++ b/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.c
@@ -0,0 +1,249 @@
+/*
+ * Support for IBM PPC 405EP-based MagicBox board 
+ * Copyright (C) 2006  Karol Lewandowski
+ *
+ * Heavily based on bubinga.c
+ *
+ * Author: SAW (IBM), derived from walnut.c.
+ *         Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/kgdb.h>
+#include <asm/ocp.h>
+#include <asm/ibm_ocp_pci.h>
+
+#include <platforms/4xx/ibm405ep.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+extern bd_t __res;
+
+/* Some IRQs unique to board
+ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
+ */
+int __init
+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	    /*
+	     *      PCI IDSEL/INTPIN->INTLINE
+	     *      A       B       C       D
+	     */
+	{
+		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
+		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
+		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
+		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
+	};
+
+	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+};
+
+
+/* The serial clock for the chip is an internal clock determined by
+ * different clock speeds/dividers.
+ * Calculate the proper input baud rate and setup the serial driver.
+ */
+static void __init
+magicbox_early_serial_map(void)
+{
+	u32 uart_div;
+	int uart_clock;
+	struct uart_port port;
+
+         /* Calculate the serial clock input frequency
+          *
+          * The base baud is the PLL OUTA (provided in the board info
+          * structure) divided by the external UART Divisor, divided
+          * by 16.
+          */
+	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
+	uart_clock = __res.bi_procfreq / uart_div;
+
+	/* Setup serial port access */
+	memset(&port, 0, sizeof(port));
+	port.membase = (void*)ACTING_UART0_IO_BASE;
+	port.irq = ACTING_UART0_INT;
+	port.uartclk = uart_clock;
+	port.regshift = 0;
+	port.iotype = SERIAL_IO_MEM;
+	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.line = 0;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 0 failed\n");
+	}
+
+	port.membase = (void*)ACTING_UART1_IO_BASE;
+	port.irq = ACTING_UART1_INT;
+	port.line = 1;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 1 failed\n");
+	}
+}
+
+void __init
+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
+{
+	unsigned int bar_response, bar;
+	/*
+	 * Expected PCI mapping:
+	 *
+	 *  PLB addr             PCI memory addr
+	 *  ---------------------       ---------------------
+	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
+	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
+	 *
+	 *  PLB addr             PCI io addr
+	 *  ---------------------       ---------------------
+	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
+	 *
+	 * The following code is simplified by assuming that the bootrom
+	 * has been well behaved in following this mapping.
+	 */
+
+#ifdef DEBUG
+	int i;
+
+	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
+	printk("PCI bridge regs before fixup \n");
+	for (i = 0; i <= 3; i++) {
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+	}
+	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif
+
+	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
+
+	/* Disable region first */
+	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
+	/* PLB starting addr, PCI: 0x80000000 */
+	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
+	/* PCI start addr, 0x80000000 */
+	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
+	/* 512MB range of PLB to PCI */
+	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
+	/* Enable no pre-fetch, enable region */
+	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
+						(PPC405_PCI_UPPER_MEM -
+						 PPC405_PCI_MEM_BASE)) | 0x01));
+
+	/* Disable region one */
+	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
+	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
+	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
+
+	/* Disable region two */
+	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
+	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
+	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
+	out_le32((void *) &(pcip->ptm2la), 0x00000000);
+
+	/* Zero config bars */
+	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+		early_write_config_dword(hose, hose->first_busno,
+					 PCI_FUNC(hose->first_busno), bar,
+					 0x00000000);
+		early_read_config_dword(hose, hose->first_busno,
+					PCI_FUNC(hose->first_busno), bar,
+					&bar_response);
+		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
+		    hose->first_busno, PCI_SLOT(hose->first_busno),
+		    PCI_FUNC(hose->first_busno), bar, bar_response);
+	}
+	/* end work arround */
+
+#ifdef DEBUG
+	printk("PCI bridge regs after fixup \n");
+	for (i = 0; i <= 3; i++) {
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
+	}
+	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
+	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
+	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
+	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
+
+#endif /* DEBUG */
+}
+
+void __init
+magicbox_setup_arch(void)
+{
+	ppc4xx_setup_arch();
+
+	ibm_ocp_set_emac(0, 1);
+
+	magicbox_early_serial_map();
+
+	/* Identify the system */
+	printk("MagicBox port (C) 2005 Karol Lewandowski <kl@jasmine.eu.org>\n");
+}
+
+void __init
+magicbox_map_io(void)
+{
+	ppc4xx_map_io();
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	      unsigned long r6, unsigned long r7)
+{
+	ppc4xx_init(r3, r4, r5, r6, r7);
+
+	ppc_md.setup_arch = magicbox_setup_arch;
+	ppc_md.setup_io_mappings = magicbox_map_io;
+
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = bubinga_early_serial_map;
+#endif
+
+}
diff --git a/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.h b/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.h
new file mode 100644
index 000000000..6ce1e5b8c
--- /dev/null
+++ b/target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.h
@@ -0,0 +1,47 @@
+/*
+ * Support for IBM PPC 405EP-based MagicBox board
+ *
+ * Heavily based on bubinga.h
+ *
+ *
+ * Author: SAW (IBM), derived from walnut.h.
+ *         Maintained by MontaVista Software <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __MAGICBOX_H__
+#define __MAGICBOX_H__
+
+#include <linux/autoconf.h>
+#include <platforms/4xx/ibm405ep.h>
+#include <asm/ppcboot.h>
+
+/* Memory map for the "MagicBox" 405EP evaluation board -- generic 4xx. */
+
+/* The UART clock is based off an internal clock -
+ * define BASE_BAUD based on the internal clock and divider(s).
+ * Since BASE_BAUD must be a constant, we will initialize it
+ * using clock/divider values which OpenBIOS initializes
+ * for typical configurations at various CPU speeds.
+ * The base baud is calculated as (FWDA / EXT UART DIV / 16)
+ */
+#define BASE_BAUD       0
+
+/* Flash */
+#define PPC40x_FPGA_BASE	0xF0300000
+#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW	0xFFF00000
+#define PPC40x_FLASH_HIGH	0xFFF80000
+#define PPC40x_FLASH_SIZE	0x80000
+
+#define PPC4xx_MACHINE_NAME	"MagicBox"
+
+#endif /* __MAGICBOX_H__ */
+#endif /* __KERNEL__ */
diff --git a/target/linux/magicbox-2.6/files/drivers/ide/ppc/magicbox_ide.c b/target/linux/magicbox-2.6/files/drivers/ide/ppc/magicbox_ide.c
new file mode 100644
index 000000000..d1f6d68ed
--- /dev/null
+++ b/target/linux/magicbox-2.6/files/drivers/ide/ppc/magicbox_ide.c
@@ -0,0 +1,147 @@
+/* Driver for MagicBox 2.0 onboard CompactFlash adapter.
+ * Written by Wojtek Kaniewski <wojtekka@toxygen.net>
+ *
+ * GNU General Public License.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+
+#define UIC0_PR 0xc4
+#define UIC0_TR 0xc5
+#define IRQ 25
+
+static int ide_offsets[IDE_NR_PORTS] = {0, 2, 4, 6, 8, 10, 12, 14, -1, -1};
+
+static u8 magicbox_ide_inb (unsigned long port)
+{
+	return (u8) (readw((void __iomem *) port) >> 8) & 255;
+}
+
+static u16 magicbox_ide_inw (unsigned long port)
+{
+	return (u16) readw((void __iomem *) port);
+}
+
+static void magicbox_ide_insw (unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr;
+
+	for (ptr = addr; count--; ptr++)
+		*ptr = readw((void __iomem *) port);
+}
+
+static u32 magicbox_ide_inl (unsigned long port)
+{
+	return (u32) readl((void __iomem *) port);
+}
+
+static void magicbox_ide_insl (unsigned long port, void *addr, u32 count)
+{
+	u32 *ptr;
+
+	for (ptr = addr; count--; ptr++)
+		*ptr = readl((void __iomem *) port);
+}
+
+static void magicbox_ide_outb (u8 value, unsigned long port)
+{
+	writew(value << 8, (void __iomem *) port);
+}
+
+static void magicbox_ide_outbsync (ide_drive_t *drive, u8 value, unsigned long port)
+{
+	writew(value << 8, (void __iomem *) port);
+}
+
+static void magicbox_ide_outw (u16 value, unsigned long port)
+{
+	writew(value, (void __iomem *) port);
+}
+
+static void magicbox_ide_outsw (unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr;
+
+	for (ptr = addr; count--; ptr++)
+		writew(*ptr, (void __iomem *) port);
+}
+
+static void magicbox_ide_outl (u32 value, unsigned long port)
+{
+	writel(value, (void __iomem *) port);
+}
+
+static void magicbox_ide_outsl (unsigned long port, void *addr, u32 count)
+{
+	u32 *ptr;
+
+	for (ptr = addr; count--; ptr++)
+		writel(*ptr, (void __iomem *) port);
+}
+
+
+static void __init ide_magicbox_register(unsigned long addr,
+					 unsigned long caddr, int irq)
+{
+	hw_regs_t hw;
+	ide_hwif_t *hwif;
+
+  	memset(&hw, 0, sizeof(hw));
+	ide_setup_ports(&hw, addr, ide_offsets, caddr + 12, 0, NULL,irq);
+
+	if (ide_register_hw(&hw, &hwif) != -1)
+	{
+		printk(KERN_NOTICE "magicbox-ide: Registered IDE-CF driver\n");
+		hwif->mmio = 2;
+		hwif->drives[0].unmask = 1;
+		hwif->OUTB = magicbox_ide_outb;
+		hwif->OUTBSYNC = magicbox_ide_outbsync;
+		hwif->OUTW = magicbox_ide_outw;
+		hwif->OUTSW = magicbox_ide_outsw;
+		hwif->OUTSL = magicbox_ide_outsl;
+		hwif->INB = magicbox_ide_inb;
+		hwif->INW = magicbox_ide_inw;
+		hwif->INSW = magicbox_ide_insw;
+		hwif->INSL = magicbox_ide_insl;
+	}
+}
+
+void __init ide_magicbox_init(void)
+{
+	volatile u16 *addr;
+	volatile u16 *caddr;
+
+	/* Turn on PerWE instead of PCIsomething */
+	mtdcr(DCRN_CPC0_PCI_BASE, mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
+
+	/* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
+	mtdcr(DCRN_EBC_BASE, 1);
+	mtdcr(DCRN_EBC_BASE + 1, 0xff11a000);
+	mtdcr(DCRN_EBC_BASE, 0x11);
+	mtdcr(DCRN_EBC_BASE + 1, 0x080bd800);
+
+	/* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
+	mtdcr(DCRN_EBC_BASE, 2);
+	mtdcr(DCRN_EBC_BASE + 1, 0xff21a000);
+	mtdcr(DCRN_EBC_BASE, 0x12);
+	mtdcr(DCRN_EBC_BASE + 1, 0x080bd800);
+
+	/* Remap physical address space */
+	addr = ioremap_nocache(0xff100000, 4096);
+	caddr = ioremap_nocache(0xff200000, 4096);
+
+	/* Set interrupt to low-to-high-edge-triggered */
+	mtdcr(UIC0_TR, mfdcr(UIC0_TR) & ~(0x80000000L >> IRQ));
+	mtdcr(UIC0_PR, mfdcr(UIC0_PR) | (0x80000000L >> IRQ));
+
+	ide_magicbox_register((unsigned long)addr, (unsigned long)caddr, IRQ);
+}
+
diff --git a/target/linux/magicbox-2.6/files/drivers/mtd/maps/magicmap.c b/target/linux/magicbox-2.6/files/drivers/mtd/maps/magicmap.c
new file mode 100644
index 000000000..b654a3d9b
--- /dev/null
+++ b/target/linux/magicbox-2.6/files/drivers/mtd/maps/magicmap.c
@@ -0,0 +1,113 @@
+/*
+ * magicmap.c: Copyleft 2005  Karol Lewandowski
+ *
+ * Mapping for MagicBox flash.
+ * Based on walnut.c.
+ *
+ * Heikki Lindholm <holindho@infradead.org>
+ *
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/autoconf.h>
+#include <asm/io.h>
+
+static struct mtd_info *flash;
+
+static struct map_info magic_map = {
+	.name =		"Magically mapped flash",
+	.phys =         0xffc00000,
+	.size =		0x400000,
+	.bankwidth =	2,
+};
+
+static struct mtd_partition magic_partitions[] = {
+	{
+		.name =   "linux",
+		.offset = 0x0,
+		.size =   0x3c0000,
+	},
+	{
+		.name =   "rootfs",
+		.offset = 0x100000,
+		.size =   0x2c0000,
+	},
+	{
+		.name =   "bootloader",
+		.offset = 0x3c0000,
+		.size =   0x040000,
+		.mask_flags = MTD_WRITEABLE,
+	},
+};
+
+int __init init_magic(void)
+{
+	u32 size, len;
+	
+	magic_map.virt =
+		(void __iomem *)ioremap(magic_map.phys, magic_map.size);
+
+	if (!magic_map.virt) {
+		printk("Failed to ioremap flash.\n");
+		return -EIO;
+	}
+
+	simple_map_init(&magic_map);
+
+	flash = do_map_probe("cfi_probe", &magic_map);
+	if (flash) {
+		flash->owner = THIS_MODULE;
+		if (flash->read(flash, 12, sizeof(u32), &len, (char *) &size) ||
+			len != 4)
+			return -ENXIO;
+		size += 0x40; /* header size of the uImage */
+		if (size < 0x400000) {
+			/* skip to next erase block */
+			if (size & (flash->erasesize - 1)) {
+				size |= (flash->erasesize - 1);
+				size += 1;
+			}
+			magic_partitions[1].offset = size;
+			magic_partitions[1].size = magic_partitions[2].offset - size;
+		}
+		
+		add_mtd_partitions(flash, magic_partitions,
+					ARRAY_SIZE(magic_partitions));
+	} else {
+		printk("map probe failed for flash\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static void __exit cleanup_magic(void)
+{
+	if (flash) {
+		del_mtd_partitions(flash);
+		map_destroy(flash);
+	}
+
+	if (magic_map.virt) {
+		iounmap((void *)magic_map.virt);
+		magic_map.virt = NULL;
+	}
+}
+
+module_init(init_magic);
+module_exit(cleanup_magic);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Karol Lewandowski");
+MODULE_DESCRIPTION("MTD map and partitions for IBM 405EP MagicBox boards");
diff --git a/target/linux/magicbox-2.6/patches/001-magicbox_support.patch b/target/linux/magicbox-2.6/patches/001-magicbox_support.patch
index 7c609e5d0..873160d3b 100644
--- a/target/linux/magicbox-2.6/patches/001-magicbox_support.patch
+++ b/target/linux/magicbox-2.6/patches/001-magicbox_support.patch
@@ -18,8 +18,8 @@ diff -urN linux.old/arch/ppc/platforms/4xx/Kconfig linux.dev/arch/ppc/platforms/
  
  config IBM_OCP
  	bool
--	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
-+	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT || MAGICBOX
+-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT
++	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT || MAGICBOX
  	default y
  
  config IBM_EMAC4
@@ -41,310 +41,6 @@ diff -urN linux.old/arch/ppc/platforms/4xx/Kconfig linux.dev/arch/ppc/platforms/
  	default y
  
  config 405GP
-diff -urN linux.old/arch/ppc/platforms/4xx/magicbox.c linux.dev/arch/ppc/platforms/4xx/magicbox.c
---- linux.old/arch/ppc/platforms/4xx/magicbox.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/ppc/platforms/4xx/magicbox.c	2006-12-14 08:48:56.000000000 +0100
-@@ -0,0 +1,249 @@
-+/*
-+ * Support for IBM PPC 405EP-based MagicBox board 
-+ * Copyright (C) 2006  Karol Lewandowski
-+ *
-+ * Heavily based on bubinga.c
-+ *
-+ * Author: SAW (IBM), derived from walnut.c.
-+ *         Maintained by MontaVista Software <source@mvista.com>
-+ *
-+ * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
-+ * terms of the GNU General Public License version 2. This program is
-+ * licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/smp.h>
-+#include <linux/threads.h>
-+#include <linux/param.h>
-+#include <linux/string.h>
-+#include <linux/blkdev.h>
-+#include <linux/pci.h>
-+#include <linux/tty.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+
-+#include <asm/system.h>
-+#include <asm/pci-bridge.h>
-+#include <asm/processor.h>
-+#include <asm/machdep.h>
-+#include <asm/page.h>
-+#include <asm/time.h>
-+#include <asm/io.h>
-+#include <asm/kgdb.h>
-+#include <asm/ocp.h>
-+#include <asm/ibm_ocp_pci.h>
-+
-+#include <platforms/4xx/ibm405ep.h>
-+
-+#undef DEBUG
-+
-+#ifdef DEBUG
-+#define DBG(x...) printk(x)
-+#else
-+#define DBG(x...)
-+#endif
-+
-+extern bd_t __res;
-+
-+/* Some IRQs unique to board
-+ * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
-+ */
-+int __init
-+ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-+{
-+	static char pci_irq_table[][4] =
-+	    /*
-+	     *      PCI IDSEL/INTPIN->INTLINE
-+	     *      A       B       C       D
-+	     */
-+	{
-+		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
-+		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
-+		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
-+		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
-+	};
-+
-+	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-+	return PCI_IRQ_TABLE_LOOKUP;
-+};
-+
-+
-+/* The serial clock for the chip is an internal clock determined by
-+ * different clock speeds/dividers.
-+ * Calculate the proper input baud rate and setup the serial driver.
-+ */
-+static void __init
-+magicbox_early_serial_map(void)
-+{
-+	u32 uart_div;
-+	int uart_clock;
-+	struct uart_port port;
-+
-+         /* Calculate the serial clock input frequency
-+          *
-+          * The base baud is the PLL OUTA (provided in the board info
-+          * structure) divided by the external UART Divisor, divided
-+          * by 16.
-+          */
-+	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
-+	uart_clock = __res.bi_procfreq / uart_div;
-+
-+	/* Setup serial port access */
-+	memset(&port, 0, sizeof(port));
-+	port.membase = (void*)ACTING_UART0_IO_BASE;
-+	port.irq = ACTING_UART0_INT;
-+	port.uartclk = uart_clock;
-+	port.regshift = 0;
-+	port.iotype = SERIAL_IO_MEM;
-+	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
-+	port.line = 0;
-+
-+	if (early_serial_setup(&port) != 0) {
-+		printk("Early serial init of port 0 failed\n");
-+	}
-+
-+	port.membase = (void*)ACTING_UART1_IO_BASE;
-+	port.irq = ACTING_UART1_INT;
-+	port.line = 1;
-+
-+	if (early_serial_setup(&port) != 0) {
-+		printk("Early serial init of port 1 failed\n");
-+	}
-+}
-+
-+void __init
-+bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-+{
-+	unsigned int bar_response, bar;
-+	/*
-+	 * Expected PCI mapping:
-+	 *
-+	 *  PLB addr             PCI memory addr
-+	 *  ---------------------       ---------------------
-+	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-+	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-+	 *
-+	 *  PLB addr             PCI io addr
-+	 *  ---------------------       ---------------------
-+	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-+	 *
-+	 * The following code is simplified by assuming that the bootrom
-+	 * has been well behaved in following this mapping.
-+	 */
-+
-+#ifdef DEBUG
-+	int i;
-+
-+	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-+	printk("PCI bridge regs before fixup \n");
-+	for (i = 0; i <= 3; i++) {
-+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-+	}
-+	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-+	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-+	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-+	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-+
-+#endif
-+
-+	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
-+
-+	/* Disable region first */
-+	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-+	/* PLB starting addr, PCI: 0x80000000 */
-+	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-+	/* PCI start addr, 0x80000000 */
-+	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-+	/* 512MB range of PLB to PCI */
-+	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-+	/* Enable no pre-fetch, enable region */
-+	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-+						(PPC405_PCI_UPPER_MEM -
-+						 PPC405_PCI_MEM_BASE)) | 0x01));
-+
-+	/* Disable region one */
-+	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-+	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-+	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-+	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-+	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-+	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
-+
-+	/* Disable region two */
-+	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-+	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-+	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-+	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-+	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-+	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-+	out_le32((void *) &(pcip->ptm2la), 0x00000000);
-+
-+	/* Zero config bars */
-+	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-+		early_write_config_dword(hose, hose->first_busno,
-+					 PCI_FUNC(hose->first_busno), bar,
-+					 0x00000000);
-+		early_read_config_dword(hose, hose->first_busno,
-+					PCI_FUNC(hose->first_busno), bar,
-+					&bar_response);
-+		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-+		    hose->first_busno, PCI_SLOT(hose->first_busno),
-+		    PCI_FUNC(hose->first_busno), bar, bar_response);
-+	}
-+	/* end work arround */
-+
-+#ifdef DEBUG
-+	printk("PCI bridge regs after fixup \n");
-+	for (i = 0; i <= 3; i++) {
-+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-+		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-+	}
-+	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-+	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-+	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-+	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-+
-+#endif /* DEBUG */
-+}
-+
-+void __init
-+magicbox_setup_arch(void)
-+{
-+	ppc4xx_setup_arch();
-+
-+	ibm_ocp_set_emac(0, 1);
-+
-+	magicbox_early_serial_map();
-+
-+	/* Identify the system */
-+	printk("MagicBox port (C) 2005 Karol Lewandowski <kl@jasmine.eu.org>\n");
-+}
-+
-+void __init
-+magicbox_map_io(void)
-+{
-+	ppc4xx_map_io();
-+}
-+
-+void __init
-+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+	      unsigned long r6, unsigned long r7)
-+{
-+	ppc4xx_init(r3, r4, r5, r6, r7);
-+
-+	ppc_md.setup_arch = magicbox_setup_arch;
-+	ppc_md.setup_io_mappings = magicbox_map_io;
-+
-+#ifdef CONFIG_KGDB
-+	ppc_md.early_serial_map = bubinga_early_serial_map;
-+#endif
-+
-+}
-diff -urN linux.old/arch/ppc/platforms/4xx/magicbox.h linux.dev/arch/ppc/platforms/4xx/magicbox.h
---- linux.old/arch/ppc/platforms/4xx/magicbox.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/ppc/platforms/4xx/magicbox.h	2006-12-14 08:48:56.000000000 +0100
-@@ -0,0 +1,47 @@
-+/*
-+ * Support for IBM PPC 405EP-based MagicBox board
-+ *
-+ * Heavily based on bubinga.h
-+ *
-+ *
-+ * Author: SAW (IBM), derived from walnut.h.
-+ *         Maintained by MontaVista Software <source@mvista.com>
-+ *
-+ * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
-+ * terms of the GNU General Public License version 2. This program is
-+ * licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ */
-+
-+#ifdef __KERNEL__
-+#ifndef __MAGICBOX_H__
-+#define __MAGICBOX_H__
-+
-+#include <linux/autoconf.h>
-+#include <platforms/4xx/ibm405ep.h>
-+#include <asm/ppcboot.h>
-+
-+/* Memory map for the "MagicBox" 405EP evaluation board -- generic 4xx. */
-+
-+/* The UART clock is based off an internal clock -
-+ * define BASE_BAUD based on the internal clock and divider(s).
-+ * Since BASE_BAUD must be a constant, we will initialize it
-+ * using clock/divider values which OpenBIOS initializes
-+ * for typical configurations at various CPU speeds.
-+ * The base baud is calculated as (FWDA / EXT UART DIV / 16)
-+ */
-+#define BASE_BAUD       0
-+
-+/* Flash */
-+#define PPC40x_FPGA_BASE	0xF0300000
-+#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */
-+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
-+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-+#define PPC40x_FLASH_LOW	0xFFF00000
-+#define PPC40x_FLASH_HIGH	0xFFF80000
-+#define PPC40x_FLASH_SIZE	0x80000
-+
-+#define PPC4xx_MACHINE_NAME	"MagicBox"
-+
-+#endif /* __MAGICBOX_H__ */
-+#endif /* __KERNEL__ */
 diff -urN linux.old/arch/ppc/platforms/4xx/Makefile linux.dev/arch/ppc/platforms/4xx/Makefile
 --- linux.old/arch/ppc/platforms/4xx/Makefile	2006-11-29 22:57:37.000000000 +0100
 +++ linux.dev/arch/ppc/platforms/4xx/Makefile	2006-12-14 08:48:56.000000000 +0100
diff --git a/target/linux/magicbox-2.6/patches/002-flash_map.patch b/target/linux/magicbox-2.6/patches/002-flash_map.patch
index 5d29a047d..415daa51b 100644
--- a/target/linux/magicbox-2.6/patches/002-flash_map.patch
+++ b/target/linux/magicbox-2.6/patches/002-flash_map.patch
@@ -17,123 +17,6 @@ diff -urN linux.old/drivers/mtd/maps/Kconfig linux.dev/drivers/mtd/maps/Kconfig
  config MTD_EBONY
  	tristate "Flash devices mapped on IBM 440GP Ebony"
  	depends on MTD_JEDECPROBE && EBONY
-diff -urN linux.old/drivers/mtd/maps/magicmap.c linux.dev/drivers/mtd/maps/magicmap.c
---- linux.old/drivers/mtd/maps/magicmap.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/mtd/maps/magicmap.c	2006-08-30 06:52:34.000000000 +0200
-@@ -0,0 +1,113 @@
-+/*
-+ * magicmap.c: Copyleft 2005  Karol Lewandowski
-+ *
-+ * Mapping for MagicBox flash.
-+ * Based on walnut.c.
-+ *
-+ * Heikki Lindholm <holindho@infradead.org>
-+ *
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/autoconf.h>
-+#include <asm/io.h>
-+
-+static struct mtd_info *flash;
-+
-+static struct map_info magic_map = {
-+	.name =		"Magically mapped flash",
-+	.phys =         0xffc00000,
-+	.size =		0x400000,
-+	.bankwidth =	2,
-+};
-+
-+static struct mtd_partition magic_partitions[] = {
-+	{
-+		.name =   "linux",
-+		.offset = 0x0,
-+		.size =   0x3c0000,
-+	},
-+	{
-+		.name =   "rootfs",
-+		.offset = 0x100000,
-+		.size =   0x2c0000,
-+	},
-+	{
-+		.name =   "bootloader",
-+		.offset = 0x3c0000,
-+		.size =   0x040000,
-+		.mask_flags = MTD_WRITEABLE,
-+	},
-+};
-+
-+int __init init_magic(void)
-+{
-+	u32 size, len;
-+	
-+	magic_map.virt =
-+		(void __iomem *)ioremap(magic_map.phys, magic_map.size);
-+
-+	if (!magic_map.virt) {
-+		printk("Failed to ioremap flash.\n");
-+		return -EIO;
-+	}
-+
-+	simple_map_init(&magic_map);
-+
-+	flash = do_map_probe("cfi_probe", &magic_map);
-+	if (flash) {
-+		flash->owner = THIS_MODULE;
-+		if (flash->read(flash, 12, sizeof(u32), &len, (char *) &size) ||
-+			len != 4)
-+			return -ENXIO;
-+		size += 0x40; /* header size of the uImage */
-+		if (size < 0x400000) {
-+			/* skip to next erase block */
-+			if (size & (flash->erasesize - 1)) {
-+				size |= (flash->erasesize - 1);
-+				size += 1;
-+			}
-+			magic_partitions[1].offset = size;
-+			magic_partitions[1].size = magic_partitions[2].offset - size;
-+		}
-+		
-+		add_mtd_partitions(flash, magic_partitions,
-+					ARRAY_SIZE(magic_partitions));
-+	} else {
-+		printk("map probe failed for flash\n");
-+		return -ENXIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static void __exit cleanup_magic(void)
-+{
-+	if (flash) {
-+		del_mtd_partitions(flash);
-+		map_destroy(flash);
-+	}
-+
-+	if (magic_map.virt) {
-+		iounmap((void *)magic_map.virt);
-+		magic_map.virt = NULL;
-+	}
-+}
-+
-+module_init(init_magic);
-+module_exit(cleanup_magic);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Karol Lewandowski");
-+MODULE_DESCRIPTION("MTD map and partitions for IBM 405EP MagicBox boards");
 diff -urN linux.old/drivers/mtd/maps/Makefile linux.dev/drivers/mtd/maps/Makefile
 --- linux.old/drivers/mtd/maps/Makefile	2006-08-30 06:30:59.000000000 +0200
 +++ linux.dev/drivers/mtd/maps/Makefile	2006-08-30 06:11:51.000000000 +0200
diff --git a/target/linux/magicbox-2.6/patches/100-cf_slot.patch b/target/linux/magicbox-2.6/patches/100-cf_slot.patch
index b5e12438f..490cfca66 100644
--- a/target/linux/magicbox-2.6/patches/100-cf_slot.patch
+++ b/target/linux/magicbox-2.6/patches/100-cf_slot.patch
@@ -2,10 +2,10 @@ diff -purN linux.old/drivers/ide/ide.c linux.dev/drivers/ide/ide.c
 --- linux.old/drivers/ide/ide.c	2007-01-10 20:10:37.000000000 +0100
 +++ linux.dev/drivers/ide/ide.c	2007-04-09 01:25:30.866800288 +0200
 @@ -1783,6 +1783,7 @@ done:
- 
- extern void pnpide_init(void);
- extern void h8300_ide_init(void);
-+extern void ide_magicbox_init(void);
+ extern void __init pnpide_init(void);
+ extern void __exit pnpide_exit(void);
+ extern void __init h8300_ide_init(void);
++extern void __init ide_magicbox_init(void);
  
  /*
   * probe_for_hwifs() finds/initializes "known" IDE interfaces
@@ -19,2109 +19,6 @@ diff -purN linux.old/drivers/ide/ide.c linux.dev/drivers/ide/ide.c
  }
  
  void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver)
-diff -purN linux.old/drivers/ide/ide.c.orig linux.dev/drivers/ide/ide.c.orig
---- linux.old/drivers/ide/ide.c.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/ide/ide.c.orig	2007-01-10 20:10:37.000000000 +0100
-@@ -0,0 +1,2099 @@
-+/*
-+ *  linux/drivers/ide/ide.c		Version 7.00beta2	Mar 05 2003
-+ *
-+ *  Copyright (C) 1994-1998  Linus Torvalds & authors (see below)
-+ */
-+
-+/*
-+ *  Mostly written by Mark Lord  <mlord@pobox.com>
-+ *                and Gadi Oxman <gadio@netvision.net.il>
-+ *                and Andre Hedrick <andre@linux-ide.org>
-+ *
-+ *  See linux/MAINTAINERS for address of current maintainer.
-+ *
-+ * This is the multiple IDE interface driver, as evolved from hd.c.
-+ * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
-+ *   (usually 14 & 15).
-+ * There can be up to two drives per interface, as per the ATA-2 spec.
-+ *
-+ * Primary:    ide0, port 0x1f0; major=3;  hda is minor=0; hdb is minor=64
-+ * Secondary:  ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
-+ * Tertiary:   ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64
-+ * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64
-+ * ...
-+ *
-+ *  From hd.c:
-+ *  |
-+ *  | It traverses the request-list, using interrupts to jump between functions.
-+ *  | As nearly all functions can be called within interrupts, we may not sleep.
-+ *  | Special care is recommended.  Have Fun!
-+ *  |
-+ *  | modified by Drew Eckhardt to check nr of hd's from the CMOS.
-+ *  |
-+ *  | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
-+ *  | in the early extended-partition checks and added DM partitions.
-+ *  |
-+ *  | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
-+ *  |
-+ *  | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
-+ *  | and general streamlining by Mark Lord (mlord@pobox.com).
-+ *
-+ *  October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
-+ *
-+ *	Mark Lord	(mlord@pobox.com)		(IDE Perf.Pkg)
-+ *	Delman Lee	(delman@ieee.org)		("Mr. atdisk2")
-+ *	Scott Snyder	(snyder@fnald0.fnal.gov)	(ATAPI IDE cd-rom)
-+ *
-+ *  This was a rewrite of just about everything from hd.c, though some original
-+ *  code is still sprinkled about.  Think of it as a major evolution, with
-+ *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au
-+ *
-+ *  Version 1.0 ALPHA	initial code, primary i/f working okay
-+ *  Version 1.3 BETA	dual i/f on shared irq tested & working!
-+ *  Version 1.4 BETA	added auto probing for irq(s)
-+ *  Version 1.5 BETA	added ALPHA (untested) support for IDE cd-roms,
-+ *  ...
-+ * Version 5.50		allow values as small as 20 for idebus=
-+ * Version 5.51		force non io_32bit in drive_cmd_intr()
-+ *			change delay_10ms() to delay_50ms() to fix problems
-+ * Version 5.52		fix incorrect invalidation of removable devices
-+ *			add "hdx=slow" command line option
-+ * Version 5.60		start to modularize the driver; the disk and ATAPI
-+ *			 drivers can be compiled as loadable modules.
-+ *			move IDE probe code to ide-probe.c
-+ *			move IDE disk code to ide-disk.c
-+ *			add support for generic IDE device subdrivers
-+ *			add m68k code from Geert Uytterhoeven
-+ *			probe all interfaces by default
-+ *			add ioctl to (re)probe an interface
-+ * Version 6.00		use per device request queues
-+ *			attempt to optimize shared hwgroup performance
-+ *			add ioctl to manually adjust bandwidth algorithms
-+ *			add kerneld support for the probe module
-+ *			fix bug in ide_error()
-+ *			fix bug in the first ide_get_lock() call for Atari
-+ *			don't flush leftover data for ATAPI devices
-+ * Version 6.01		clear hwgroup->active while the hwgroup sleeps
-+ *			support HDIO_GETGEO for floppies
-+ * Version 6.02		fix ide_ack_intr() call
-+ *			check partition table on floppies
-+ * Version 6.03		handle bad status bit sequencing in ide_wait_stat()
-+ * Version 6.10		deleted old entries from this list of updates
-+ *			replaced triton.c with ide-dma.c generic PCI DMA
-+ *			added support for BIOS-enabled UltraDMA
-+ *			rename all "promise" things to "pdc4030"
-+ *			fix EZ-DRIVE handling on small disks
-+ * Version 6.11		fix probe error in ide_scan_devices()
-+ *			fix ancient "jiffies" polling bugs
-+ *			mask all hwgroup interrupts on each irq entry
-+ * Version 6.12		integrate ioctl and proc interfaces
-+ *			fix parsing of "idex=" command line parameter
-+ * Version 6.13		add support for ide4/ide5 courtesy rjones@orchestream.com
-+ * Version 6.14		fixed IRQ sharing among PCI devices
-+ * Version 6.15		added SMP awareness to IDE drivers
-+ * Version 6.16		fixed various bugs; even more SMP friendly
-+ * Version 6.17		fix for newest EZ-Drive problem
-+ * Version 6.18		default unpartitioned-disk translation now "BIOS LBA"
-+ * Version 6.19		Re-design for a UNIFORM driver for all platforms,
-+ *			  model based on suggestions from Russell King and
-+ *			  Geert Uytterhoeven
-+ *			Promise DC4030VL now supported.
-+ *			add support for ide6/ide7
-+ *			delay_50ms() changed to ide_delay_50ms() and exported.
-+ * Version 6.20		Added/Fixed Generic ATA-66 support and hwif detection.
-+ *			Added hdx=flash to allow for second flash disk
-+ *			  detection w/o the hang loop.
-+ *			Added support for ide8/ide9
-+ *			Added idex=ata66 for the quirky chipsets that are
-+ *			  ATA-66 compliant, but have yet to determine a method
-+ *			  of verification of the 80c cable presence.
-+ *			  Specifically Promise's PDC20262 chipset.
-+ * Version 6.21		Fixing/Fixed SMP spinlock issue with insight from an old
-+ *			  hat that clarified original low level driver design.
-+ * Version 6.30		Added SMP support; fixed multmode issues.  -ml
-+ * Version 6.31		Debug Share INTR's and request queue streaming
-+ *			Native ATA-100 support
-+ *			Prep for Cascades Project
-+ * Version 7.00alpha	First named revision of ide rearrange
-+ *
-+ *  Some additional driver compile-time options are in ./include/linux/ide.h
-+ *
-+ *  To do, in likely order of completion:
-+ *	- modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f
-+ *
-+ */
-+
-+#define	REVISION	"Revision: 7.00alpha2"
-+#define	VERSION		"Id: ide.c 7.00a2 20020906"
-+
-+#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-+
-+#define _IDE_C			/* Tell ide.h it's really us */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/timer.h>
-+#include <linux/mm.h>
-+#include <linux/interrupt.h>
-+#include <linux/major.h>
-+#include <linux/errno.h>
-+#include <linux/genhd.h>
-+#include <linux/blkpg.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/ide.h>
-+#include <linux/completion.h>
-+#include <linux/reboot.h>
-+#include <linux/cdrom.h>
-+#include <linux/seq_file.h>
-+#include <linux/device.h>
-+#include <linux/bitops.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/irq.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+
-+
-+/* default maximum number of failures */
-+#define IDE_DEFAULT_MAX_FAILURES 	1
-+
-+static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
-+					IDE2_MAJOR, IDE3_MAJOR,
-+					IDE4_MAJOR, IDE5_MAJOR,
-+					IDE6_MAJOR, IDE7_MAJOR,
-+					IDE8_MAJOR, IDE9_MAJOR };
-+
-+static int idebus_parameter;	/* holds the "idebus=" parameter */
-+static int system_bus_speed;	/* holds what we think is VESA/PCI bus speed */
-+static int initializing;	/* set while initializing built-in drivers */
-+
-+DECLARE_MUTEX(ide_cfg_sem);
-+ __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
-+
-+#ifdef CONFIG_BLK_DEV_IDEPCI
-+static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
-+#endif
-+
-+#ifdef CONFIG_IDEDMA_AUTO
-+int noautodma = 0;
-+#else
-+int noautodma = 1;
-+#endif
-+
-+EXPORT_SYMBOL(noautodma);
-+
-+/*
-+ * This is declared extern in ide.h, for access by other IDE modules:
-+ */
-+ide_hwif_t ide_hwifs[MAX_HWIFS];	/* master data repository */
-+
-+EXPORT_SYMBOL(ide_hwifs);
-+
-+/*
-+ * Do not even *think* about calling this!
-+ */
-+static void init_hwif_data(ide_hwif_t *hwif, unsigned int index)
-+{
-+	unsigned int unit;
-+
-+	/* bulk initialize hwif & drive info with zeros */
-+	memset(hwif, 0, sizeof(ide_hwif_t));
-+
-+	/* fill in any non-zero initial values */
-+	hwif->index	= index;
-+	hwif->major	= ide_hwif_to_major[index];
-+
-+	hwif->name[0]	= 'i';
-+	hwif->name[1]	= 'd';
-+	hwif->name[2]	= 'e';
-+	hwif->name[3]	= '0' + index;
-+
-+	hwif->bus_state	= BUSSTATE_ON;
-+
-+	hwif->atapi_dma = 0;		/* disable all atapi dma */ 
-+	hwif->ultra_mask = 0x80;	/* disable all ultra */
-+	hwif->mwdma_mask = 0x80;	/* disable all mwdma */
-+	hwif->swdma_mask = 0x80;	/* disable all swdma */
-+
-+	init_completion(&hwif->gendev_rel_comp);
-+
-+	default_hwif_iops(hwif);
-+	default_hwif_transport(hwif);
-+	for (unit = 0; unit < MAX_DRIVES; ++unit) {
-+		ide_drive_t *drive = &hwif->drives[unit];
-+
-+		drive->media			= ide_disk;
-+		drive->select.all		= (unit<<4)|0xa0;
-+		drive->hwif			= hwif;
-+		drive->ctl			= 0x08;
-+		drive->ready_stat		= READY_STAT;
-+		drive->bad_wstat		= BAD_W_STAT;
-+		drive->special.b.recalibrate	= 1;
-+		drive->special.b.set_geometry	= 1;
-+		drive->name[0]			= 'h';
-+		drive->name[1]			= 'd';
-+		drive->name[2]			= 'a' + (index * MAX_DRIVES) + unit;
-+		drive->max_failures		= IDE_DEFAULT_MAX_FAILURES;
-+		drive->using_dma		= 0;
-+		drive->vdma			= 0;
-+		INIT_LIST_HEAD(&drive->list);
-+		init_completion(&drive->gendev_rel_comp);
-+	}
-+}
-+
-+static void init_hwif_default(ide_hwif_t *hwif, unsigned int index)
-+{
-+	hw_regs_t hw;
-+
-+	memset(&hw, 0, sizeof(hw_regs_t));
-+
-+	ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, &hwif->irq);
-+
-+	memcpy(&hwif->hw, &hw, sizeof(hw));
-+	memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports));
-+
-+	hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
-+#ifdef CONFIG_BLK_DEV_HD
-+	if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA)
-+		hwif->noprobe = 1;	/* may be overridden by ide_setup() */
-+#endif
-+}
-+
-+extern void ide_arm_init(void);
-+
-+/*
-+ * init_ide_data() sets reasonable default values into all fields
-+ * of all instances of the hwifs and drives, but only on the first call.
-+ * Subsequent calls have no effect (they don't wipe out anything).
-+ *
-+ * This routine is normally called at driver initialization time,
-+ * but may also be called MUCH earlier during kernel "command-line"
-+ * parameter processing.  As such, we cannot depend on any other parts
-+ * of the kernel (such as memory allocation) to be functioning yet.
-+ *
-+ * This is too bad, as otherwise we could dynamically allocate the
-+ * ide_drive_t structs as needed, rather than always consuming memory
-+ * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them.
-+ *
-+ * FIXME: We should stuff the setup data into __init and copy the
-+ * relevant hwifs/allocate them properly during boot.
-+ */
-+#define MAGIC_COOKIE 0x12345678
-+static void __init init_ide_data (void)
-+{
-+	ide_hwif_t *hwif;
-+	unsigned int index;
-+	static unsigned long magic_cookie = MAGIC_COOKIE;
-+
-+	if (magic_cookie != MAGIC_COOKIE)
-+		return;		/* already initialized */
-+	magic_cookie = 0;
-+
-+	/* Initialise all interface structures */
-+	for (index = 0; index < MAX_HWIFS; ++index) {
-+		hwif = &ide_hwifs[index];
-+		init_hwif_data(hwif, index);
-+		init_hwif_default(hwif, index);
-+#if !defined(CONFIG_PPC32) || !defined(CONFIG_PCI)
-+		hwif->irq = hwif->hw.irq =
-+			ide_init_default_irq(hwif->io_ports[IDE_DATA_OFFSET]);
-+#endif
-+	}
-+#ifdef CONFIG_IDE_ARM
-+	initializing = 1;
-+	ide_arm_init();
-+	initializing = 0;
-+#endif
-+}
-+
-+/**
-+ *	ide_system_bus_speed	-	guess bus speed
-+ *
-+ *	ide_system_bus_speed() returns what we think is the system VESA/PCI
-+ *	bus speed (in MHz). This is used for calculating interface PIO timings.
-+ *	The default is 40 for known PCI systems, 50 otherwise.
-+ *	The "idebus=xx" parameter can be used to override this value.
-+ *	The actual value to be used is computed/displayed the first time
-+ *	through. Drivers should only use this as a last resort.
-+ *
-+ *	Returns a guessed speed in MHz.
-+ */
-+
-+static int ide_system_bus_speed(void)
-+{
-+#ifdef CONFIG_PCI
-+	static struct pci_device_id pci_default[] = {
-+		{ PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) },
-+		{ }
-+	};
-+#else
-+#define pci_default 0
-+#endif /* CONFIG_PCI */
-+
-+	if (!system_bus_speed) {
-+		if (idebus_parameter) {
-+			/* user supplied value */
-+			system_bus_speed = idebus_parameter;
-+		} else if (pci_dev_present(pci_default)) {
-+			/* safe default value for PCI */
-+			system_bus_speed = 33;
-+		} else {
-+			/* safe default value for VESA and PCI */
-+			system_bus_speed = 50;
-+		}
-+		printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
-+			"for PIO modes%s\n", system_bus_speed,
-+			idebus_parameter ? "" : "; override with idebus=xx");
-+	}
-+	return system_bus_speed;
-+}
-+
-+#ifdef CONFIG_PROC_FS
-+struct proc_dir_entry *proc_ide_root;
-+#endif
-+
-+static struct resource* hwif_request_region(ide_hwif_t *hwif,
-+					    unsigned long addr, int num)
-+{
-+	struct resource *res = request_region(addr, num, hwif->name);
-+
-+	if (!res)
-+		printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
-+				hwif->name, addr, addr+num-1);
-+	return res;
-+}
-+
-+/**
-+ *	ide_hwif_request_regions - request resources for IDE
-+ *	@hwif: interface to use
-+ *
-+ *	Requests all the needed resources for an interface.
-+ *	Right now core IDE code does this work which is deeply wrong.
-+ *	MMIO leaves it to the controller driver,
-+ *	PIO will migrate this way over time.
-+ */
-+
-+int ide_hwif_request_regions(ide_hwif_t *hwif)
-+{
-+	unsigned long addr;
-+	unsigned int i;
-+
-+	if (hwif->mmio == 2)
-+		return 0;
-+	BUG_ON(hwif->mmio == 1);
-+	addr = hwif->io_ports[IDE_CONTROL_OFFSET];
-+	if (addr && !hwif_request_region(hwif, addr, 1))
-+		goto control_region_busy;
-+	hwif->straight8 = 0;
-+	addr = hwif->io_ports[IDE_DATA_OFFSET];
-+	if ((addr | 7) == hwif->io_ports[IDE_STATUS_OFFSET]) {
-+		if (!hwif_request_region(hwif, addr, 8))
-+			goto data_region_busy;
-+		hwif->straight8 = 1;
-+		return 0;
-+	}
-+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
-+		addr = hwif->io_ports[i];
-+		if (!hwif_request_region(hwif, addr, 1)) {
-+			while (--i)
-+				release_region(addr, 1);
-+			goto data_region_busy;
-+		}
-+	}
-+	return 0;
-+
-+data_region_busy:
-+	addr = hwif->io_ports[IDE_CONTROL_OFFSET];
-+	if (addr)
-+		release_region(addr, 1);
-+control_region_busy:
-+	/* If any errors are return, we drop the hwif interface. */
-+	return -EBUSY;
-+}
-+
-+/**
-+ *	ide_hwif_release_regions - free IDE resources
-+ *
-+ *	Note that we only release the standard ports,
-+ *	and do not even try to handle any extra ports
-+ *	allocated for weird IDE interface chipsets.
-+ *
-+ *	Note also that we don't yet handle mmio resources here. More
-+ *	importantly our caller should be doing this so we need to 
-+ *	restructure this as a helper function for drivers.
-+ */
-+
-+void ide_hwif_release_regions(ide_hwif_t *hwif)
-+{
-+	u32 i = 0;
-+
-+	if (hwif->mmio == 2)
-+		return;
-+	if (hwif->io_ports[IDE_CONTROL_OFFSET])
-+		release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
-+	if (hwif->straight8) {
-+		release_region(hwif->io_ports[IDE_DATA_OFFSET], 8);
-+		return;
-+	}
-+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
-+		if (hwif->io_ports[i])
-+			release_region(hwif->io_ports[i], 1);
-+}
-+
-+/**
-+ *	ide_hwif_restore	-	restore hwif to template
-+ *	@hwif: hwif to update
-+ *	@tmp_hwif: template
-+ *
-+ *	Restore hwif to a previous state by copying most settings
-+ *	from the template.
-+ */
-+
-+static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
-+{
-+	hwif->hwgroup			= tmp_hwif->hwgroup;
-+
-+	hwif->gendev.parent		= tmp_hwif->gendev.parent;
-+
-+	hwif->proc			= tmp_hwif->proc;
-+
-+	hwif->major			= tmp_hwif->major;
-+	hwif->straight8			= tmp_hwif->straight8;
-+	hwif->bus_state			= tmp_hwif->bus_state;
-+
-+	hwif->atapi_dma			= tmp_hwif->atapi_dma;
-+	hwif->ultra_mask		= tmp_hwif->ultra_mask;
-+	hwif->mwdma_mask		= tmp_hwif->mwdma_mask;
-+	hwif->swdma_mask		= tmp_hwif->swdma_mask;
-+
-+	hwif->chipset			= tmp_hwif->chipset;
-+	hwif->hold			= tmp_hwif->hold;
-+
-+#ifdef CONFIG_BLK_DEV_IDEPCI
-+	hwif->pci_dev			= tmp_hwif->pci_dev;
-+	hwif->cds			= tmp_hwif->cds;
-+#endif
-+
-+	hwif->tuneproc			= tmp_hwif->tuneproc;
-+	hwif->speedproc			= tmp_hwif->speedproc;
-+	hwif->selectproc		= tmp_hwif->selectproc;
-+	hwif->reset_poll		= tmp_hwif->reset_poll;
-+	hwif->pre_reset			= tmp_hwif->pre_reset;
-+	hwif->resetproc			= tmp_hwif->resetproc;
-+	hwif->intrproc			= tmp_hwif->intrproc;
-+	hwif->maskproc			= tmp_hwif->maskproc;
-+	hwif->quirkproc			= tmp_hwif->quirkproc;
-+	hwif->busproc			= tmp_hwif->busproc;
-+
-+	hwif->ata_input_data		= tmp_hwif->ata_input_data;
-+	hwif->ata_output_data		= tmp_hwif->ata_output_data;
-+	hwif->atapi_input_bytes		= tmp_hwif->atapi_input_bytes;
-+	hwif->atapi_output_bytes	= tmp_hwif->atapi_output_bytes;
-+
-+	hwif->dma_setup			= tmp_hwif->dma_setup;
-+	hwif->dma_exec_cmd		= tmp_hwif->dma_exec_cmd;
-+	hwif->dma_start			= tmp_hwif->dma_start;
-+	hwif->ide_dma_end		= tmp_hwif->ide_dma_end;
-+	hwif->ide_dma_check		= tmp_hwif->ide_dma_check;
-+	hwif->ide_dma_on		= tmp_hwif->ide_dma_on;
-+	hwif->ide_dma_off_quietly	= tmp_hwif->ide_dma_off_quietly;
-+	hwif->ide_dma_test_irq		= tmp_hwif->ide_dma_test_irq;
-+	hwif->ide_dma_host_on		= tmp_hwif->ide_dma_host_on;
-+	hwif->ide_dma_host_off		= tmp_hwif->ide_dma_host_off;
-+	hwif->ide_dma_lostirq		= tmp_hwif->ide_dma_lostirq;
-+	hwif->ide_dma_timeout		= tmp_hwif->ide_dma_timeout;
-+
-+	hwif->OUTB			= tmp_hwif->OUTB;
-+	hwif->OUTBSYNC			= tmp_hwif->OUTBSYNC;
-+	hwif->OUTW			= tmp_hwif->OUTW;
-+	hwif->OUTL			= tmp_hwif->OUTL;
-+	hwif->OUTSW			= tmp_hwif->OUTSW;
-+	hwif->OUTSL			= tmp_hwif->OUTSL;
-+
-+	hwif->INB			= tmp_hwif->INB;
-+	hwif->INW			= tmp_hwif->INW;
-+	hwif->INL			= tmp_hwif->INL;
-+	hwif->INSW			= tmp_hwif->INSW;
-+	hwif->INSL			= tmp_hwif->INSL;
-+
-+	hwif->sg_max_nents		= tmp_hwif->sg_max_nents;
-+
-+	hwif->mmio			= tmp_hwif->mmio;
-+	hwif->rqsize			= tmp_hwif->rqsize;
-+	hwif->no_lba48			= tmp_hwif->no_lba48;
-+
-+#ifndef CONFIG_BLK_DEV_IDECS
-+	hwif->irq			= tmp_hwif->irq;
-+#endif
-+
-+	hwif->dma_base			= tmp_hwif->dma_base;
-+	hwif->dma_master		= tmp_hwif->dma_master;
-+	hwif->dma_command		= tmp_hwif->dma_command;
-+	hwif->dma_vendor1		= tmp_hwif->dma_vendor1;
-+	hwif->dma_status		= tmp_hwif->dma_status;
-+	hwif->dma_vendor3		= tmp_hwif->dma_vendor3;
-+	hwif->dma_prdtable		= tmp_hwif->dma_prdtable;
-+
-+	hwif->config_data		= tmp_hwif->config_data;
-+	hwif->select_data		= tmp_hwif->select_data;
-+	hwif->extra_base		= tmp_hwif->extra_base;
-+	hwif->extra_ports		= tmp_hwif->extra_ports;
-+	hwif->autodma			= tmp_hwif->autodma;
-+	hwif->udma_four			= tmp_hwif->udma_four;
-+	hwif->no_dsc			= tmp_hwif->no_dsc;
-+
-+	hwif->hwif_data			= tmp_hwif->hwif_data;
-+}
-+
-+/**
-+ *	ide_unregister		-	free an IDE interface
-+ *	@index: index of interface (will change soon to a pointer)
-+ *
-+ *	Perform the final unregister of an IDE interface. At the moment
-+ *	we don't refcount interfaces so this will also get split up.
-+ *
-+ *	Locking:
-+ *	The caller must not hold the IDE locks
-+ *	The drive present/vanishing is not yet properly locked
-+ *	Take care with the callbacks. These have been split to avoid
-+ *	deadlocking the IDE layer. The shutdown callback is called
-+ *	before we take the lock and free resources. It is up to the
-+ *	caller to be sure there is no pending I/O here, and that
-+ *	the interface will not be reopened (present/vanishing locking
-+ *	isn't yet done BTW). After we commit to the final kill we
-+ *	call the cleanup callback with the ide locks held.
-+ *
-+ *	Unregister restores the hwif structures to the default state.
-+ *	This is raving bonkers.
-+ */
-+
-+void ide_unregister(unsigned int index)
-+{
-+	ide_drive_t *drive;
-+	ide_hwif_t *hwif, *g;
-+	static ide_hwif_t tmp_hwif; /* protected by ide_cfg_sem */
-+	ide_hwgroup_t *hwgroup;
-+	int irq_count = 0, unit;
-+
-+	BUG_ON(index >= MAX_HWIFS);
-+
-+	BUG_ON(in_interrupt());
-+	BUG_ON(irqs_disabled());
-+	down(&ide_cfg_sem);
-+	spin_lock_irq(&ide_lock);
-+	hwif = &ide_hwifs[index];
-+	if (!hwif->present)
-+		goto abort;
-+	for (unit = 0; unit < MAX_DRIVES; ++unit) {
-+		drive = &hwif->drives[unit];
-+		if (!drive->present)
-+			continue;
-+		spin_unlock_irq(&ide_lock);
-+		device_unregister(&drive->gendev);
-+		wait_for_completion(&drive->gendev_rel_comp);
-+		spin_lock_irq(&ide_lock);
-+	}
-+	hwif->present = 0;
-+
-+	spin_unlock_irq(&ide_lock);
-+
-+	destroy_proc_ide_interface(hwif);
-+
-+	hwgroup = hwif->hwgroup;
-+	/*
-+	 * free the irq if we were the only hwif using it
-+	 */
-+	g = hwgroup->hwif;
-+	do {
-+		if (g->irq == hwif->irq)
-+			++irq_count;
-+		g = g->next;
-+	} while (g != hwgroup->hwif);
-+	if (irq_count == 1)
-+		free_irq(hwif->irq, hwgroup);
-+
-+	spin_lock_irq(&ide_lock);
-+	/*
-+	 * Note that we only release the standard ports,
-+	 * and do not even try to handle any extra ports
-+	 * allocated for weird IDE interface chipsets.
-+	 */
-+	ide_hwif_release_regions(hwif);
-+
-+	/*
-+	 * Remove us from the hwgroup, and free
-+	 * the hwgroup if we were the only member
-+	 */
-+	if (hwif->next == hwif) {
-+		BUG_ON(hwgroup->hwif != hwif);
-+		kfree(hwgroup);
-+	} else {
-+		/* There is another interface in hwgroup.
-+		 * Unlink us, and set hwgroup->drive and ->hwif to
-+		 * something sane.
-+		 */
-+		g = hwgroup->hwif;
-+		while (g->next != hwif)
-+			g = g->next;
-+		g->next = hwif->next;
-+		if (hwgroup->hwif == hwif) {
-+			/* Chose a random hwif for hwgroup->hwif.
-+			 * It's guaranteed that there are no drives
-+			 * left in the hwgroup.
-+			 */
-+			BUG_ON(hwgroup->drive != NULL);
-+			hwgroup->hwif = g;
-+		}
-+		BUG_ON(hwgroup->hwif == hwif);
-+	}
-+
-+	/* More messed up locking ... */
-+	spin_unlock_irq(&ide_lock);
-+	device_unregister(&hwif->gendev);
-+	wait_for_completion(&hwif->gendev_rel_comp);
-+
-+	/*
-+	 * Remove us from the kernel's knowledge
-+	 */
-+	blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS);
-+	kfree(hwif->sg_table);
-+	unregister_blkdev(hwif->major, hwif->name);
-+	spin_lock_irq(&ide_lock);
-+
-+	if (hwif->dma_base) {
-+		(void) ide_release_dma(hwif);
-+
-+		hwif->dma_base = 0;
-+		hwif->dma_master = 0;
-+		hwif->dma_command = 0;
-+		hwif->dma_vendor1 = 0;
-+		hwif->dma_status = 0;
-+		hwif->dma_vendor3 = 0;
-+		hwif->dma_prdtable = 0;
-+
-+		hwif->extra_base  = 0;
-+		hwif->extra_ports = 0;
-+	}
-+
-+	/* copy original settings */
-+	tmp_hwif = *hwif;
-+
-+	/* restore hwif data to pristine status */
-+	init_hwif_data(hwif, index);
-+	init_hwif_default(hwif, index);
-+
-+	ide_hwif_restore(hwif, &tmp_hwif);
-+
-+abort:
-+	spin_unlock_irq(&ide_lock);
-+	up(&ide_cfg_sem);
-+}
-+
-+EXPORT_SYMBOL(ide_unregister);
-+
-+
-+/**
-+ *	ide_setup_ports 	-	set up IDE interface ports
-+ *	@hw: register descriptions
-+ *	@base: base register
-+ *	@offsets: table of register offsets
-+ *	@ctrl: control register
-+ *	@ack_irq: IRQ ack
-+ *	@irq: interrupt lie
-+ *
-+ *	Setup hw_regs_t structure described by parameters.  You
-+ *	may set up the hw structure yourself OR use this routine to
-+ *	do it for you. This is basically a helper
-+ *
-+ */
-+ 
-+void ide_setup_ports (	hw_regs_t *hw,
-+			unsigned long base, int *offsets,
-+			unsigned long ctrl, unsigned long intr,
-+			ide_ack_intr_t *ack_intr,
-+/*
-+ *			ide_io_ops_t *iops,
-+ */
-+			int irq)
-+{
-+	int i;
-+
-+	memset(hw, 0, sizeof(hw_regs_t));
-+	for (i = 0; i < IDE_NR_PORTS; i++) {
-+		if (offsets[i] == -1) {
-+			switch(i) {
-+				case IDE_CONTROL_OFFSET:
-+					hw->io_ports[i] = ctrl;
-+					break;
-+#if defined(CONFIG_AMIGA) || defined(CONFIG_MAC)
-+				case IDE_IRQ_OFFSET:
-+					hw->io_ports[i] = intr;
-+					break;
-+#endif /* (CONFIG_AMIGA) || (CONFIG_MAC) */
-+				default:
-+					hw->io_ports[i] = 0;
-+					break;
-+			}
-+		} else {
-+			hw->io_ports[i] = base + offsets[i];
-+		}
-+	}
-+	hw->irq = irq;
-+	hw->dma = NO_DMA;
-+	hw->ack_intr = ack_intr;
-+/*
-+ *	hw->iops = iops;
-+ */
-+}
-+
-+/**
-+ *	ide_register_hw_with_fixup	-	register IDE interface
-+ *	@hw: hardware registers
-+ *	@hwifp: pointer to returned hwif
-+ *	@fixup: fixup function
-+ *
-+ *	Register an IDE interface, specifying exactly the registers etc.
-+ *	Set init=1 iff calling before probes have taken place.
-+ *
-+ *	Returns -1 on error.
-+ */
-+
-+int ide_register_hw_with_fixup(hw_regs_t *hw, ide_hwif_t **hwifp, void(*fixup)(ide_hwif_t *hwif))
-+{
-+	int index, retry = 1;
-+	ide_hwif_t *hwif;
-+
-+	do {
-+		for (index = 0; index < MAX_HWIFS; ++index) {
-+			hwif = &ide_hwifs[index];
-+			if (hwif->hw.io_ports[IDE_DATA_OFFSET] == hw->io_ports[IDE_DATA_OFFSET])
-+				goto found;
-+		}
-+		for (index = 0; index < MAX_HWIFS; ++index) {
-+			hwif = &ide_hwifs[index];
-+			if (hwif->hold)
-+				continue;
-+			if ((!hwif->present && !hwif->mate && !initializing) ||
-+			    (!hwif->hw.io_ports[IDE_DATA_OFFSET] && initializing))
-+				goto found;
-+		}
-+		for (index = 0; index < MAX_HWIFS; index++)
-+			ide_unregister(index);
-+	} while (retry--);
-+	return -1;
-+found:
-+	if (hwif->present)
-+		ide_unregister(index);
-+	else if (!hwif->hold) {
-+		init_hwif_data(hwif, index);
-+		init_hwif_default(hwif, index);
-+	}
-+	if (hwif->present)
-+		return -1;
-+	memcpy(&hwif->hw, hw, sizeof(*hw));
-+	memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports));
-+	hwif->irq = hw->irq;
-+	hwif->noprobe = 0;
-+	hwif->chipset = hw->chipset;
-+	hwif->gendev.parent = hw->dev;
-+
-+	if (!initializing) {
-+		probe_hwif_init_with_fixup(hwif, fixup);
-+		create_proc_ide_interfaces();
-+	}
-+
-+	if (hwifp)
-+		*hwifp = hwif;
-+
-+	return (initializing || hwif->present) ? index : -1;
-+}
-+
-+EXPORT_SYMBOL(ide_register_hw_with_fixup);
-+
-+int ide_register_hw(hw_regs_t *hw, ide_hwif_t **hwifp)
-+{
-+	return ide_register_hw_with_fixup(hw, hwifp, NULL);
-+}
-+
-+EXPORT_SYMBOL(ide_register_hw);
-+
-+/*
-+ *	Locks for IDE setting functionality
-+ */
-+
-+DECLARE_MUTEX(ide_setting_sem);
-+
-+/**
-+ *	__ide_add_setting	-	add an ide setting option
-+ *	@drive: drive to use
-+ *	@name: setting name
-+ *	@rw: true if the function is read write
-+ *	@read_ioctl: function to call on read
-+ *	@write_ioctl: function to call on write
-+ *	@data_type: type of data
-+ *	@min: range minimum
-+ *	@max: range maximum
-+ *	@mul_factor: multiplication scale
-+ *	@div_factor: divison scale
-+ *	@data: private data field
-+ *	@set: setting
-+ *	@auto_remove: setting auto removal flag
-+ *
-+ *	Removes the setting named from the device if it is present.
-+ *	The function takes the settings_lock to protect against 
-+ *	parallel changes. This function must not be called from IRQ
-+ *	context. Returns 0 on success or -1 on failure.
-+ *
-+ *	BUGS: This code is seriously over-engineered. There is also
-+ *	magic about how the driver specific features are setup. If
-+ *	a driver is attached we assume the driver settings are auto
-+ *	remove.
-+ */
-+
-+static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove)
-+{
-+	ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL;
-+
-+	down(&ide_setting_sem);
-+	while ((*p) && strcmp((*p)->name, name) < 0)
-+		p = &((*p)->next);
-+	if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL)
-+		goto abort;
-+	if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL)
-+		goto abort;
-+	strcpy(setting->name, name);
-+	setting->rw = rw;
-+	setting->read_ioctl = read_ioctl;
-+	setting->write_ioctl = write_ioctl;
-+	setting->data_type = data_type;
-+	setting->min = min;
-+	setting->max = max;
-+	setting->mul_factor = mul_factor;
-+	setting->div_factor = div_factor;
-+	setting->data = data;
-+	setting->set = set;
-+	
-+	setting->next = *p;
-+	if (auto_remove)
-+		setting->auto_remove = 1;
-+	*p = setting;
-+	up(&ide_setting_sem);
-+	return 0;
-+abort:
-+	up(&ide_setting_sem);
-+	kfree(setting);
-+	return -1;
-+}
-+
-+int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set)
-+{
-+	return __ide_add_setting(drive, name, rw, read_ioctl, write_ioctl, data_type, min, max, mul_factor, div_factor, data, set, 1);
-+}
-+
-+EXPORT_SYMBOL(ide_add_setting);
-+
-+/**
-+ *	__ide_remove_setting	-	remove an ide setting option
-+ *	@drive: drive to use
-+ *	@name: setting name
-+ *
-+ *	Removes the setting named from the device if it is present.
-+ *	The caller must hold the setting semaphore.
-+ */
-+ 
-+static void __ide_remove_setting (ide_drive_t *drive, char *name)
-+{
-+	ide_settings_t **p, *setting;
-+
-+	p = (ide_settings_t **) &drive->settings;
-+
-+	while ((*p) && strcmp((*p)->name, name))
-+		p = &((*p)->next);
-+	if ((setting = (*p)) == NULL)
-+		return;
-+
-+	(*p) = setting->next;
-+	
-+	kfree(setting->name);
-+	kfree(setting);
-+}
-+
-+/**
-+ *	ide_find_setting_by_ioctl	-	find a drive specific ioctl
-+ *	@drive: drive to scan
-+ *	@cmd: ioctl command to handle
-+ *
-+ *	Scan's the device setting table for a matching entry and returns
-+ *	this or NULL if no entry is found. The caller must hold the
-+ *	setting semaphore
-+ */
-+ 
-+static ide_settings_t *ide_find_setting_by_ioctl (ide_drive_t *drive, int cmd)
-+{
-+	ide_settings_t *setting = drive->settings;
-+
-+	while (setting) {
-+		if (setting->read_ioctl == cmd || setting->write_ioctl == cmd)
-+			break;
-+		setting = setting->next;
-+	}
-+	
-+	return setting;
-+}
-+
-+/**
-+ *	ide_find_setting_by_name	-	find a drive specific setting
-+ *	@drive: drive to scan
-+ *	@name: setting name
-+ *
-+ *	Scan's the device setting table for a matching entry and returns
-+ *	this or NULL if no entry is found. The caller must hold the
-+ *	setting semaphore
-+ */
-+ 
-+ide_settings_t *ide_find_setting_by_name (ide_drive_t *drive, char *name)
-+{
-+	ide_settings_t *setting = drive->settings;
-+
-+	while (setting) {
-+		if (strcmp(setting->name, name) == 0)
-+			break;
-+		setting = setting->next;
-+	}
-+	return setting;
-+}
-+
-+/**
-+ *	auto_remove_settings	-	remove driver specific settings
-+ *	@drive: drive
-+ *
-+ *	Automatically remove all the driver specific settings for this
-+ *	drive. This function may sleep and must not be called from IRQ
-+ *	context. The caller must hold ide_setting_sem.
-+ */
-+ 
-+static void auto_remove_settings (ide_drive_t *drive)
-+{
-+	ide_settings_t *setting;
-+repeat:
-+	setting = drive->settings;
-+	while (setting) {
-+		if (setting->auto_remove) {
-+			__ide_remove_setting(drive, setting->name);
-+			goto repeat;
-+		}
-+		setting = setting->next;
-+	}
-+}
-+
-+/**
-+ *	ide_read_setting	-	read an IDE setting
-+ *	@drive: drive to read from
-+ *	@setting: drive setting
-+ *
-+ *	Read a drive setting and return the value. The caller
-+ *	must hold the ide_setting_sem when making this call.
-+ *
-+ *	BUGS: the data return and error are the same return value
-+ *	so an error -EINVAL and true return of the same value cannot
-+ *	be told apart
-+ */
-+ 
-+int ide_read_setting (ide_drive_t *drive, ide_settings_t *setting)
-+{
-+	int		val = -EINVAL;
-+	unsigned long	flags;
-+
-+	if ((setting->rw & SETTING_READ)) {
-+		spin_lock_irqsave(&ide_lock, flags);
-+		switch(setting->data_type) {
-+			case TYPE_BYTE:
-+				val = *((u8 *) setting->data);
-+				break;
-+			case TYPE_SHORT:
-+				val = *((u16 *) setting->data);
-+				break;
-+			case TYPE_INT:
-+			case TYPE_INTA:
-+				val = *((u32 *) setting->data);
-+				break;
-+		}
-+		spin_unlock_irqrestore(&ide_lock, flags);
-+	}
-+	return val;
-+}
-+
-+/**
-+ *	ide_spin_wait_hwgroup	-	wait for group
-+ *	@drive: drive in the group
-+ *
-+ *	Wait for an IDE device group to go non busy and then return
-+ *	holding the ide_lock which guards the hwgroup->busy status
-+ *	and right to use it.
-+ */
-+
-+int ide_spin_wait_hwgroup (ide_drive_t *drive)
-+{
-+	ide_hwgroup_t *hwgroup = HWGROUP(drive);
-+	unsigned long timeout = jiffies + (3 * HZ);
-+
-+	spin_lock_irq(&ide_lock);
-+
-+	while (hwgroup->busy) {
-+		unsigned long lflags;
-+		spin_unlock_irq(&ide_lock);
-+		local_irq_set(lflags);
-+		if (time_after(jiffies, timeout)) {
-+			local_irq_restore(lflags);
-+			printk(KERN_ERR "%s: channel busy\n", drive->name);
-+			return -EBUSY;
-+		}
-+		local_irq_restore(lflags);
-+		spin_lock_irq(&ide_lock);
-+	}
-+	return 0;
-+}
-+
-+EXPORT_SYMBOL(ide_spin_wait_hwgroup);
-+
-+/**
-+ *	ide_write_setting	-	read an IDE setting
-+ *	@drive: drive to read from
-+ *	@setting: drive setting
-+ *	@val: value
-+ *
-+ *	Write a drive setting if it is possible. The caller
-+ *	must hold the ide_setting_sem when making this call.
-+ *
-+ *	BUGS: the data return and error are the same return value
-+ *	so an error -EINVAL and true return of the same value cannot
-+ *	be told apart
-+ *
-+ *	FIXME:  This should be changed to enqueue a special request
-+ *	to the driver to change settings, and then wait on a sema for completion.
-+ *	The current scheme of polling is kludgy, though safe enough.
-+ */
-+
-+int ide_write_setting (ide_drive_t *drive, ide_settings_t *setting, int val)
-+{
-+	int i;
-+	u32 *p;
-+
-+	if (!capable(CAP_SYS_ADMIN))
-+		return -EACCES;
-+	if (!(setting->rw & SETTING_WRITE))
-+		return -EPERM;
-+	if (val < setting->min || val > setting->max)
-+		return -EINVAL;
-+	if (setting->set)
-+		return setting->set(drive, val);
-+	if (ide_spin_wait_hwgroup(drive))
-+		return -EBUSY;
-+	switch (setting->data_type) {
-+		case TYPE_BYTE:
-+			*((u8 *) setting->data) = val;
-+			break;
-+		case TYPE_SHORT:
-+			*((u16 *) setting->data) = val;
-+			break;
-+		case TYPE_INT:
-+			*((u32 *) setting->data) = val;
-+			break;
-+		case TYPE_INTA:
-+			p = (u32 *) setting->data;
-+			for (i = 0; i < 1 << PARTN_BITS; i++, p++)
-+				*p = val;
-+			break;
-+	}
-+	spin_unlock_irq(&ide_lock);
-+	return 0;
-+}
-+
-+static int set_io_32bit(ide_drive_t *drive, int arg)
-+{
-+	drive->io_32bit = arg;
-+#ifdef CONFIG_BLK_DEV_DTC2278
-+	if (HWIF(drive)->chipset == ide_dtc2278)
-+		HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg;
-+#endif /* CONFIG_BLK_DEV_DTC2278 */
-+	return 0;
-+}
-+
-+static int set_using_dma (ide_drive_t *drive, int arg)
-+{
-+#ifdef CONFIG_BLK_DEV_IDEDMA
-+	if (!drive->id || !(drive->id->capability & 1))
-+		return -EPERM;
-+	if (HWIF(drive)->ide_dma_check == NULL)
-+		return -EPERM;
-+	if (arg) {
-+		if (HWIF(drive)->ide_dma_check(drive)) return -EIO;
-+		if (HWIF(drive)->ide_dma_on(drive)) return -EIO;
-+	} else {
-+		if (__ide_dma_off(drive))
-+			return -EIO;
-+	}
-+	return 0;
-+#else
-+	return -EPERM;
-+#endif
-+}
-+
-+static int set_pio_mode (ide_drive_t *drive, int arg)
-+{
-+	struct request rq;
-+
-+	if (!HWIF(drive)->tuneproc)
-+		return -ENOSYS;
-+	if (drive->special.b.set_tune)
-+		return -EBUSY;
-+	ide_init_drive_cmd(&rq);
-+	drive->tune_req = (u8) arg;
-+	drive->special.b.set_tune = 1;
-+	(void) ide_do_drive_cmd(drive, &rq, ide_wait);
-+	return 0;
-+}
-+
-+static int set_xfer_rate (ide_drive_t *drive, int arg)
-+{
-+	int err = ide_wait_cmd(drive,
-+			WIN_SETFEATURES, (u8) arg,
-+			SETFEATURES_XFER, 0, NULL);
-+
-+	if (!err && arg) {
-+		ide_set_xfer_rate(drive, (u8) arg);
-+		ide_driveid_update(drive);
-+	}
-+	return err;
-+}
-+
-+/**
-+ *	ide_add_generic_settings	-	generic ide settings
-+ *	@drive: drive being configured
-+ *
-+ *	Add the generic parts of the system settings to the /proc files and
-+ *	ioctls for this IDE device. The caller must not be holding the
-+ *	ide_setting_sem.
-+ */
-+
-+void ide_add_generic_settings (ide_drive_t *drive)
-+{
-+/*
-+ *			  drive		setting name		read/write access				read ioctl		write ioctl		data type	min	max				mul_factor	div_factor	data pointer			set function
-+ */
-+	__ide_add_setting(drive,	"io_32bit",		drive->no_io_32bit ? SETTING_READ : SETTING_RW,	HDIO_GET_32BIT,		HDIO_SET_32BIT,		TYPE_BYTE,	0,	1 + (SUPPORT_VLB_SYNC << 1),	1,		1,		&drive->io_32bit,		set_io_32bit,	0);
-+	__ide_add_setting(drive,	"keepsettings",		SETTING_RW,					HDIO_GET_KEEPSETTINGS,	HDIO_SET_KEEPSETTINGS,	TYPE_BYTE,	0,	1,				1,		1,		&drive->keep_settings,		NULL,		0);
-+	__ide_add_setting(drive,	"nice1",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	1,				1,		1,		&drive->nice1,			NULL,		0);
-+	__ide_add_setting(drive,	"pio_mode",		SETTING_WRITE,					-1,			HDIO_SET_PIO_MODE,	TYPE_BYTE,	0,	255,				1,		1,		NULL,				set_pio_mode,	0);
-+	__ide_add_setting(drive,	"unmaskirq",		drive->no_unmask ? SETTING_READ : SETTING_RW,	HDIO_GET_UNMASKINTR,	HDIO_SET_UNMASKINTR,	TYPE_BYTE,	0,	1,				1,		1,		&drive->unmask,			NULL,		0);
-+	__ide_add_setting(drive,	"using_dma",		SETTING_RW,					HDIO_GET_DMA,		HDIO_SET_DMA,		TYPE_BYTE,	0,	1,				1,		1,		&drive->using_dma,		set_using_dma,	0);
-+	__ide_add_setting(drive,	"init_speed",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	70,				1,		1,		&drive->init_speed,		NULL,		0);
-+	__ide_add_setting(drive,	"current_speed",	SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	70,				1,		1,		&drive->current_speed,		set_xfer_rate,	0);
-+	__ide_add_setting(drive,	"number",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	3,				1,		1,		&drive->dn,			NULL,		0);
-+}
-+
-+/**
-+ *	system_bus_clock	-	clock guess
-+ *
-+ *	External version of the bus clock guess used by very old IDE drivers
-+ *	for things like VLB timings. Should not be used.
-+ */
-+
-+int system_bus_clock (void)
-+{
-+	return((int) ((!system_bus_speed) ? ide_system_bus_speed() : system_bus_speed ));
-+}
-+
-+EXPORT_SYMBOL(system_bus_clock);
-+
-+static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
-+{
-+	ide_drive_t *drive = dev->driver_data;
-+	struct request rq;
-+	struct request_pm_state rqpm;
-+	ide_task_t args;
-+
-+	memset(&rq, 0, sizeof(rq));
-+	memset(&rqpm, 0, sizeof(rqpm));
-+	memset(&args, 0, sizeof(args));
-+	rq.cmd_type = REQ_TYPE_PM_SUSPEND;
-+	rq.special = &args;
-+	rq.data = &rqpm;
-+	rqpm.pm_step = ide_pm_state_start_suspend;
-+	if (mesg.event == PM_EVENT_PRETHAW)
-+		mesg.event = PM_EVENT_FREEZE;
-+	rqpm.pm_state = mesg.event;
-+
-+	return ide_do_drive_cmd(drive, &rq, ide_wait);
-+}
-+
-+static int generic_ide_resume(struct device *dev)
-+{
-+	ide_drive_t *drive = dev->driver_data;
-+	struct request rq;
-+	struct request_pm_state rqpm;
-+	ide_task_t args;
-+
-+	memset(&rq, 0, sizeof(rq));
-+	memset(&rqpm, 0, sizeof(rqpm));
-+	memset(&args, 0, sizeof(args));
-+	rq.cmd_type = REQ_TYPE_PM_RESUME;
-+	rq.special = &args;
-+	rq.data = &rqpm;
-+	rqpm.pm_step = ide_pm_state_start_resume;
-+	rqpm.pm_state = PM_EVENT_ON;
-+
-+	return ide_do_drive_cmd(drive, &rq, ide_head_wait);
-+}
-+
-+int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
-+			unsigned int cmd, unsigned long arg)
-+{
-+	ide_settings_t *setting;
-+	ide_driver_t *drv;
-+	int err = 0;
-+	void __user *p = (void __user *)arg;
-+
-+	down(&ide_setting_sem);
-+	if ((setting = ide_find_setting_by_ioctl(drive, cmd)) != NULL) {
-+		if (cmd == setting->read_ioctl) {
-+			err = ide_read_setting(drive, setting);
-+			up(&ide_setting_sem);
-+			return err >= 0 ? put_user(err, (long __user *)arg) : err;
-+		} else {
-+			if (bdev != bdev->bd_contains)
-+				err = -EINVAL;
-+			else
-+				err = ide_write_setting(drive, setting, arg);
-+			up(&ide_setting_sem);
-+			return err;
-+		}
-+	}
-+	up(&ide_setting_sem);
-+
-+	switch (cmd) {
-+		case HDIO_OBSOLETE_IDENTITY:
-+		case HDIO_GET_IDENTITY:
-+			if (bdev != bdev->bd_contains)
-+				return -EINVAL;
-+			if (drive->id_read == 0)
-+				return -ENOMSG;
-+			if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142))
-+				return -EFAULT;
-+			return 0;
-+
-+		case HDIO_GET_NICE:
-+			return put_user(drive->dsc_overlap	<<	IDE_NICE_DSC_OVERLAP	|
-+					drive->atapi_overlap	<<	IDE_NICE_ATAPI_OVERLAP	|
-+					drive->nice0		<< 	IDE_NICE_0		|
-+					drive->nice1		<<	IDE_NICE_1		|
-+					drive->nice2		<<	IDE_NICE_2,
-+					(long __user *) arg);
-+
-+#ifdef CONFIG_IDE_TASK_IOCTL
-+		case HDIO_DRIVE_TASKFILE:
-+		        if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
-+				return -EACCES;
-+			switch(drive->media) {
-+				case ide_disk:
-+					return ide_taskfile_ioctl(drive, cmd, arg);
-+				default:
-+					return -ENOMSG;
-+			}
-+#endif /* CONFIG_IDE_TASK_IOCTL */
-+
-+		case HDIO_DRIVE_CMD:
-+			if (!capable(CAP_SYS_RAWIO))
-+				return -EACCES;
-+			return ide_cmd_ioctl(drive, cmd, arg);
-+
-+		case HDIO_DRIVE_TASK:
-+			if (!capable(CAP_SYS_RAWIO))
-+				return -EACCES;
-+			return ide_task_ioctl(drive, cmd, arg);
-+
-+		case HDIO_SCAN_HWIF:
-+		{
-+			hw_regs_t hw;
-+			int args[3];
-+			if (!capable(CAP_SYS_RAWIO)) return -EACCES;
-+			if (copy_from_user(args, p, 3 * sizeof(int)))
-+				return -EFAULT;
-+			memset(&hw, 0, sizeof(hw));
-+			ide_init_hwif_ports(&hw, (unsigned long) args[0],
-+					    (unsigned long) args[1], NULL);
-+			hw.irq = args[2];
-+			if (ide_register_hw(&hw, NULL) == -1)
-+				return -EIO;
-+			return 0;
-+		}
-+	        case HDIO_UNREGISTER_HWIF:
-+			if (!capable(CAP_SYS_RAWIO)) return -EACCES;
-+			/* (arg > MAX_HWIFS) checked in function */
-+			ide_unregister(arg);
-+			return 0;
-+		case HDIO_SET_NICE:
-+			if (!capable(CAP_SYS_ADMIN)) return -EACCES;
-+			if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
-+				return -EPERM;
-+			drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
-+			drv = *(ide_driver_t **)bdev->bd_disk->private_data;
-+			if (drive->dsc_overlap && !drv->supports_dsc_overlap) {
-+				drive->dsc_overlap = 0;
-+				return -EPERM;
-+			}
-+			drive->nice1 = (arg >> IDE_NICE_1) & 1;
-+			return 0;
-+		case HDIO_DRIVE_RESET:
-+		{
-+			unsigned long flags;
-+			if (!capable(CAP_SYS_ADMIN)) return -EACCES;
-+			
-+			/*
-+			 *	Abort the current command on the
-+			 *	group if there is one, taking
-+			 *	care not to allow anything else
-+			 *	to be queued and to die on the
-+			 *	spot if we miss one somehow
-+			 */
-+
-+			spin_lock_irqsave(&ide_lock, flags);
-+
-+			if (HWGROUP(drive)->resetting) {
-+				spin_unlock_irqrestore(&ide_lock, flags);
-+				return -EBUSY;
-+			}
-+
-+			ide_abort(drive, "drive reset");
-+
-+			BUG_ON(HWGROUP(drive)->handler);
-+				
-+			/* Ensure nothing gets queued after we
-+			   drop the lock. Reset will clear the busy */
-+		   
-+			HWGROUP(drive)->busy = 1;
-+			spin_unlock_irqrestore(&ide_lock, flags);
-+			(void) ide_do_reset(drive);
-+
-+			return 0;
-+		}
-+
-+		case CDROMEJECT:
-+		case CDROMCLOSETRAY:
-+			return scsi_cmd_ioctl(file, bdev->bd_disk, cmd, p);
-+
-+		case HDIO_GET_BUSSTATE:
-+			if (!capable(CAP_SYS_ADMIN))
-+				return -EACCES;
-+			if (put_user(HWIF(drive)->bus_state, (long __user *)arg))
-+				return -EFAULT;
-+			return 0;
-+
-+		case HDIO_SET_BUSSTATE:
-+			if (!capable(CAP_SYS_ADMIN))
-+				return -EACCES;
-+			if (HWIF(drive)->busproc)
-+				return HWIF(drive)->busproc(drive, (int)arg);
-+			return -EOPNOTSUPP;
-+		default:
-+			return -EINVAL;
-+	}
-+}
-+
-+EXPORT_SYMBOL(generic_ide_ioctl);
-+
-+/*
-+ * stridx() returns the offset of c within s,
-+ * or -1 if c is '\0' or not found within s.
-+ */
-+static int __init stridx (const char *s, char c)
-+{
-+	char *i = strchr(s, c);
-+	return (i && c) ? i - s : -1;
-+}
-+
-+/*
-+ * match_parm() does parsing for ide_setup():
-+ *
-+ * 1. the first char of s must be '='.
-+ * 2. if the remainder matches one of the supplied keywords,
-+ *     the index (1 based) of the keyword is negated and returned.
-+ * 3. if the remainder is a series of no more than max_vals numbers
-+ *     separated by commas, the numbers are saved in vals[] and a
-+ *     count of how many were saved is returned.  Base10 is assumed,
-+ *     and base16 is allowed when prefixed with "0x".
-+ * 4. otherwise, zero is returned.
-+ */
-+static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals)
-+{
-+	static const char *decimal = "0123456789";
-+	static const char *hex = "0123456789abcdef";
-+	int i, n;
-+
-+	if (*s++ == '=') {
-+		/*
-+		 * Try matching against the supplied keywords,
-+		 * and return -(index+1) if we match one
-+		 */
-+		if (keywords != NULL) {
-+			for (i = 0; *keywords != NULL; ++i) {
-+				if (!strcmp(s, *keywords++))
-+					return -(i+1);
-+			}
-+		}
-+		/*
-+		 * Look for a series of no more than "max_vals"
-+		 * numeric values separated by commas, in base10,
-+		 * or base16 when prefixed with "0x".
-+		 * Return a count of how many were found.
-+		 */
-+		for (n = 0; (i = stridx(decimal, *s)) >= 0;) {
-+			vals[n] = i;
-+			while ((i = stridx(decimal, *++s)) >= 0)
-+				vals[n] = (vals[n] * 10) + i;
-+			if (*s == 'x' && !vals[n]) {
-+				while ((i = stridx(hex, *++s)) >= 0)
-+					vals[n] = (vals[n] * 0x10) + i;
-+			}
-+			if (++n == max_vals)
-+				break;
-+			if (*s == ',' || *s == ';')
-+				++s;
-+		}
-+		if (!*s)
-+			return n;
-+	}
-+	return 0;	/* zero = nothing matched */
-+}
-+
-+#ifdef CONFIG_BLK_DEV_ALI14XX
-+static int __initdata probe_ali14xx;
-+extern int ali14xx_init(void);
-+#endif
-+#ifdef CONFIG_BLK_DEV_UMC8672
-+static int __initdata probe_umc8672;
-+extern int umc8672_init(void);
-+#endif
-+#ifdef CONFIG_BLK_DEV_DTC2278
-+static int __initdata probe_dtc2278;
-+extern int dtc2278_init(void);
-+#endif
-+#ifdef CONFIG_BLK_DEV_HT6560B
-+static int __initdata probe_ht6560b;
-+extern int ht6560b_init(void);
-+#endif
-+#ifdef CONFIG_BLK_DEV_QD65XX
-+static int __initdata probe_qd65xx;
-+extern int qd65xx_init(void);
-+#endif
-+
-+static int __initdata is_chipset_set[MAX_HWIFS];
-+
-+/*
-+ * ide_setup() gets called VERY EARLY during initialization,
-+ * to handle kernel "command line" strings beginning with "hdx=" or "ide".
-+ *
-+ * Remember to update Documentation/ide.txt if you change something here.
-+ */
-+static int __init ide_setup(char *s)
-+{
-+	int i, vals[3];
-+	ide_hwif_t *hwif;
-+	ide_drive_t *drive;
-+	unsigned int hw, unit;
-+	const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1);
-+	const char max_hwif  = '0' + (MAX_HWIFS - 1);
-+
-+	
-+	if (strncmp(s,"hd",2) == 0 && s[2] == '=')	/* hd= is for hd.c   */
-+		return 0;				/* driver and not us */
-+
-+	if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2))
-+		return 0;
-+
-+	printk(KERN_INFO "ide_setup: %s", s);
-+	init_ide_data ();
-+
-+#ifdef CONFIG_BLK_DEV_IDEDOUBLER
-+	if (!strcmp(s, "ide=doubler")) {
-+		extern int ide_doubler;
-+
-+		printk(" : Enabled support for IDE doublers\n");
-+		ide_doubler = 1;
-+		return 1;
-+	}
-+#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
-+
-+	if (!strcmp(s, "ide=nodma")) {
-+		printk(" : Prevented DMA\n");
-+		noautodma = 1;
-+		return 1;
-+	}
-+
-+#ifdef CONFIG_BLK_DEV_IDEPCI
-+	if (!strcmp(s, "ide=reverse")) {
-+		ide_scan_direction = 1;
-+		printk(" : Enabled support for IDE inverse scan order.\n");
-+		return 1;
-+	}
-+#endif /* CONFIG_BLK_DEV_IDEPCI */
-+
-+	/*
-+	 * Look for drive options:  "hdx="
-+	 */
-+	if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
-+		const char *hd_words[] = {
-+			"none", "noprobe", "nowerr", "cdrom", "serialize",
-+			"autotune", "noautotune", "minus8", "swapdata", "bswap",
-+			"noflush", "remap", "remap63", "scsi", NULL };
-+		unit = s[2] - 'a';
-+		hw   = unit / MAX_DRIVES;
-+		unit = unit % MAX_DRIVES;
-+		hwif = &ide_hwifs[hw];
-+		drive = &hwif->drives[unit];
-+		if (strncmp(s + 4, "ide-", 4) == 0) {
-+			strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
-+			goto done;
-+		}
-+		switch (match_parm(&s[3], hd_words, vals, 3)) {
-+			case -1: /* "none" */
-+			case -2: /* "noprobe" */
-+				drive->noprobe = 1;
-+				goto done;
-+			case -3: /* "nowerr" */
-+				drive->bad_wstat = BAD_R_STAT;
-+				hwif->noprobe = 0;
-+				goto done;
-+			case -4: /* "cdrom" */
-+				drive->present = 1;
-+				drive->media = ide_cdrom;
-+				/* an ATAPI device ignores DRDY */
-+				drive->ready_stat = 0;
-+				hwif->noprobe = 0;
-+				goto done;
-+			case -5: /* "serialize" */
-+				printk(" -- USE \"ide%d=serialize\" INSTEAD", hw);
-+				goto do_serialize;
-+			case -6: /* "autotune" */
-+				drive->autotune = IDE_TUNE_AUTO;
-+				goto obsolete_option;
-+			case -7: /* "noautotune" */
-+				drive->autotune = IDE_TUNE_NOAUTO;
-+				goto obsolete_option;
-+			case -9: /* "swapdata" */
-+			case -10: /* "bswap" */
-+				drive->bswap = 1;
-+				goto done;
-+			case -11: /* noflush */
-+				drive->noflush = 1;
-+				goto done;
-+			case -12: /* "remap" */
-+				drive->remap_0_to_1 = 1;
-+				goto done;
-+			case -13: /* "remap63" */
-+				drive->sect0 = 63;
-+				goto done;
-+			case -14: /* "scsi" */
-+				drive->scsi = 1;
-+				goto done;
-+			case 3: /* cyl,head,sect */
-+				drive->media	= ide_disk;
-+				drive->ready_stat = READY_STAT;
-+				drive->cyl	= drive->bios_cyl  = vals[0];
-+				drive->head	= drive->bios_head = vals[1];
-+				drive->sect	= drive->bios_sect = vals[2];
-+				drive->present	= 1;
-+				drive->forced_geom = 1;
-+				hwif->noprobe = 0;
-+				goto done;
-+			default:
-+				goto bad_option;
-+		}
-+	}
-+
-+	if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e')
-+		goto bad_option;
-+	/*
-+	 * Look for bus speed option:  "idebus="
-+	 */
-+	if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') {
-+		if (match_parm(&s[6], NULL, vals, 1) != 1)
-+			goto bad_option;
-+		if (vals[0] >= 20 && vals[0] <= 66) {
-+			idebus_parameter = vals[0];
-+		} else
-+			printk(" -- BAD BUS SPEED! Expected value from 20 to 66");
-+		goto done;
-+	}
-+	/*
-+	 * Look for interface options:  "idex="
-+	 */
-+	if (s[3] >= '0' && s[3] <= max_hwif) {
-+		/*
-+		 * Be VERY CAREFUL changing this: note hardcoded indexes below
-+		 * (-8, -9, -10) are reserved to ease the hardcoding.
-+		 */
-+		static const char *ide_words[] = {
-+			"noprobe", "serialize", "autotune", "noautotune", 
-+			"reset", "dma", "ata66", "minus8", "minus9",
-+			"minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
-+			"dtc2278", "umc8672", "ali14xx", NULL };
-+		hw = s[3] - '0';
-+		hwif = &ide_hwifs[hw];
-+		i = match_parm(&s[4], ide_words, vals, 3);
-+
-+		/*
-+		 * Cryptic check to ensure chipset not already set for hwif.
-+		 * Note: we can't depend on hwif->chipset here.
-+		 */
-+		if ((i >= -18 && i <= -11) || (i > 0 && i <= 3)) {
-+			/* chipset already specified */
-+			if (is_chipset_set[hw])
-+				goto bad_option;
-+			if (i > -18 && i <= -11) {
-+				/* these drivers are for "ide0=" only */
-+				if (hw != 0)
-+					goto bad_hwif;
-+				/* chipset already specified for 2nd port */
-+				if (is_chipset_set[hw+1])
-+					goto bad_option;
-+			}
-+			is_chipset_set[hw] = 1;
-+			printk("\n");
-+		}
-+
-+		switch (i) {
-+#ifdef CONFIG_BLK_DEV_ALI14XX
-+			case -17: /* "ali14xx" */
-+				probe_ali14xx = 1;
-+				goto done;
-+#endif
-+#ifdef CONFIG_BLK_DEV_UMC8672
-+			case -16: /* "umc8672" */
-+				probe_umc8672 = 1;
-+				goto done;
-+#endif
-+#ifdef CONFIG_BLK_DEV_DTC2278
-+			case -15: /* "dtc2278" */
-+				probe_dtc2278 = 1;
-+				goto done;
-+#endif
-+#ifdef CONFIG_BLK_DEV_CMD640
-+			case -14: /* "cmd640_vlb" */
-+			{
-+				extern int cmd640_vlb; /* flag for cmd640.c */
-+				cmd640_vlb = 1;
-+				goto done;
-+			}
-+#endif
-+#ifdef CONFIG_BLK_DEV_HT6560B
-+			case -13: /* "ht6560b" */
-+				probe_ht6560b = 1;
-+				goto done;
-+#endif
-+#ifdef CONFIG_BLK_DEV_QD65XX
-+			case -12: /* "qd65xx" */
-+				probe_qd65xx = 1;
-+				goto done;
-+#endif
-+#ifdef CONFIG_BLK_DEV_4DRIVES
-+			case -11: /* "four" drives on one set of ports */
-+			{
-+				ide_hwif_t *mate = &ide_hwifs[hw^1];
-+				mate->drives[0].select.all ^= 0x20;
-+				mate->drives[1].select.all ^= 0x20;
-+				hwif->chipset = mate->chipset = ide_4drives;
-+				mate->irq = hwif->irq;
-+				memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
-+				goto do_serialize;
-+			}
-+#endif /* CONFIG_BLK_DEV_4DRIVES */
-+			case -10: /* minus10 */
-+			case -9: /* minus9 */
-+			case -8: /* minus8 */
-+				goto bad_option;
-+			case -7: /* ata66 */
-+#ifdef CONFIG_BLK_DEV_IDEPCI
-+				hwif->udma_four = 1;
-+				goto obsolete_option;
-+#else
-+				goto bad_hwif;
-+#endif
-+			case -6: /* dma */
-+				hwif->autodma = 1;
-+				goto obsolete_option;
-+			case -5: /* "reset" */
-+				hwif->reset = 1;
-+				goto obsolete_option;
-+			case -4: /* "noautotune" */
-+				hwif->drives[0].autotune = IDE_TUNE_NOAUTO;
-+				hwif->drives[1].autotune = IDE_TUNE_NOAUTO;
-+				goto obsolete_option;
-+			case -3: /* "autotune" */
-+				hwif->drives[0].autotune = IDE_TUNE_AUTO;
-+				hwif->drives[1].autotune = IDE_TUNE_AUTO;
-+				goto obsolete_option;
-+			case -2: /* "serialize" */
-+			do_serialize:
-+				hwif->mate = &ide_hwifs[hw^1];
-+				hwif->mate->mate = hwif;
-+				hwif->serialized = hwif->mate->serialized = 1;
-+				goto obsolete_option;
-+
-+			case -1: /* "noprobe" */
-+				hwif->noprobe = 1;
-+				goto done;
-+
-+			case 1:	/* base */
-+				vals[1] = vals[0] + 0x206; /* default ctl */
-+			case 2: /* base,ctl */
-+				vals[2] = 0;	/* default irq = probe for it */
-+			case 3: /* base,ctl,irq */
-+				hwif->hw.irq = vals[2];
-+				ide_init_hwif_ports(&hwif->hw, (unsigned long) vals[0], (unsigned long) vals[1], &hwif->irq);
-+				memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
-+				hwif->irq      = vals[2];
-+				hwif->noprobe  = 0;
-+				hwif->chipset  = ide_forced;
-+				goto obsolete_option;
-+
-+			case 0: goto bad_option;
-+			default:
-+				printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n");
-+				return 1;
-+		}
-+	}
-+bad_option:
-+	printk(" -- BAD OPTION\n");
-+	return 1;
-+obsolete_option:
-+	printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n");
-+	return 1;
-+bad_hwif:
-+	printk("-- NOT SUPPORTED ON ide%d", hw);
-+done:
-+	printk("\n");
-+	return 1;
-+}
-+
-+extern void pnpide_init(void);
-+extern void h8300_ide_init(void);
-+
-+/*
-+ * probe_for_hwifs() finds/initializes "known" IDE interfaces
-+ */
-+static void __init probe_for_hwifs (void)
-+{
-+#ifdef CONFIG_BLK_DEV_IDEPCI
-+	ide_scan_pcibus(ide_scan_direction);
-+#endif /* CONFIG_BLK_DEV_IDEPCI */
-+
-+#ifdef CONFIG_ETRAX_IDE
-+	{
-+		extern void init_e100_ide(void);
-+		init_e100_ide();
-+	}
-+#endif /* CONFIG_ETRAX_IDE */
-+#ifdef CONFIG_BLK_DEV_CMD640
-+	{
-+		extern void ide_probe_for_cmd640x(void);
-+		ide_probe_for_cmd640x();
-+	}
-+#endif /* CONFIG_BLK_DEV_CMD640 */
-+#ifdef CONFIG_BLK_DEV_IDE_PMAC
-+	{
-+		extern void pmac_ide_probe(void);
-+		pmac_ide_probe();
-+	}
-+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-+#ifdef CONFIG_BLK_DEV_GAYLE
-+	{
-+		extern void gayle_init(void);
-+		gayle_init();
-+	}
-+#endif /* CONFIG_BLK_DEV_GAYLE */
-+#ifdef CONFIG_BLK_DEV_FALCON_IDE
-+	{
-+		extern void falconide_init(void);
-+		falconide_init();
-+	}
-+#endif /* CONFIG_BLK_DEV_FALCON_IDE */
-+#ifdef CONFIG_BLK_DEV_MAC_IDE
-+	{
-+		extern void macide_init(void);
-+		macide_init();
-+	}
-+#endif /* CONFIG_BLK_DEV_MAC_IDE */
-+#ifdef CONFIG_BLK_DEV_Q40IDE
-+	{
-+		extern void q40ide_init(void);
-+		q40ide_init();
-+	}
-+#endif /* CONFIG_BLK_DEV_Q40IDE */
-+#ifdef CONFIG_BLK_DEV_BUDDHA
-+	{
-+		extern void buddha_init(void);
-+		buddha_init();
-+	}
-+#endif /* CONFIG_BLK_DEV_BUDDHA */
-+#ifdef CONFIG_BLK_DEV_IDEPNP
-+	pnpide_init();
-+#endif
-+#ifdef CONFIG_H8300
-+	h8300_ide_init();
-+#endif
-+}
-+
-+void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver)
-+{
-+#ifdef CONFIG_PROC_FS
-+	ide_add_proc_entries(drive->proc, driver->proc, drive);
-+#endif
-+}
-+
-+EXPORT_SYMBOL(ide_register_subdriver);
-+
-+/**
-+ *	ide_unregister_subdriver	-	disconnect drive from driver
-+ *	@drive: drive to unplug
-+ *	@driver: driver
-+ *
-+ *	Disconnect a drive from the driver it was attached to and then
-+ *	clean up the various proc files and other objects attached to it.
-+ *
-+ *	Takes ide_setting_sem and ide_lock.
-+ *	Caller must hold none of the locks.
-+ */
-+
-+void ide_unregister_subdriver(ide_drive_t *drive, ide_driver_t *driver)
-+{
-+	unsigned long flags;
-+	
-+	down(&ide_setting_sem);
-+	spin_lock_irqsave(&ide_lock, flags);
-+#ifdef CONFIG_PROC_FS
-+	ide_remove_proc_entries(drive->proc, driver->proc);
-+#endif
-+	auto_remove_settings(drive);
-+	spin_unlock_irqrestore(&ide_lock, flags);
-+	up(&ide_setting_sem);
-+}
-+
-+EXPORT_SYMBOL(ide_unregister_subdriver);
-+
-+/*
-+ * Probe module
-+ */
-+
-+EXPORT_SYMBOL(ide_lock);
-+
-+static int ide_bus_match(struct device *dev, struct device_driver *drv)
-+{
-+	return 1;
-+}
-+
-+static char *media_string(ide_drive_t *drive)
-+{
-+	switch (drive->media) {
-+	case ide_disk:
-+		return "disk";
-+	case ide_cdrom:
-+		return "cdrom";
-+	case ide_tape:
-+		return "tape";
-+	case ide_floppy:
-+		return "floppy";
-+	default:
-+		return "UNKNOWN";
-+	}
-+}
-+
-+static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf)
-+{
-+	ide_drive_t *drive = to_ide_device(dev);
-+	return sprintf(buf, "%s\n", media_string(drive));
-+}
-+
-+static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf)
-+{
-+	ide_drive_t *drive = to_ide_device(dev);
-+	return sprintf(buf, "%s\n", drive->name);
-+}
-+
-+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
-+{
-+	ide_drive_t *drive = to_ide_device(dev);
-+	return sprintf(buf, "ide:m-%s\n", media_string(drive));
-+}
-+
-+static struct device_attribute ide_dev_attrs[] = {
-+	__ATTR_RO(media),
-+	__ATTR_RO(drivename),
-+	__ATTR_RO(modalias),
-+	__ATTR_NULL
-+};
-+
-+static int ide_uevent(struct device *dev, char **envp, int num_envp,
-+		      char *buffer, int buffer_size)
-+{
-+	ide_drive_t *drive = to_ide_device(dev);
-+	int i = 0;
-+	int length = 0;
-+
-+	add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
-+		       "MEDIA=%s", media_string(drive));
-+	add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
-+		       "DRIVENAME=%s", drive->name);
-+	add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
-+		       "MODALIAS=ide:m-%s", media_string(drive));
-+	envp[i] = NULL;
-+	return 0;
-+}
-+
-+static int generic_ide_probe(struct device *dev)
-+{
-+	ide_drive_t *drive = to_ide_device(dev);
-+	ide_driver_t *drv = to_ide_driver(dev->driver);
-+
-+	return drv->probe ? drv->probe(drive) : -ENODEV;
-+}
-+
-+static int generic_ide_remove(struct device *dev)
-+{
-+	ide_drive_t *drive = to_ide_device(dev);
-+	ide_driver_t *drv = to_ide_driver(dev->driver);
-+
-+	if (drv->remove)
-+		drv->remove(drive);
-+
-+	return 0;
-+}
-+
-+static void generic_ide_shutdown(struct device *dev)
-+{
-+	ide_drive_t *drive = to_ide_device(dev);
-+	ide_driver_t *drv = to_ide_driver(dev->driver);
-+
-+	if (dev->driver && drv->shutdown)
-+		drv->shutdown(drive);
-+}
-+
-+struct bus_type ide_bus_type = {
-+	.name		= "ide",
-+	.match		= ide_bus_match,
-+	.uevent		= ide_uevent,
-+	.probe		= generic_ide_probe,
-+	.remove		= generic_ide_remove,
-+	.shutdown	= generic_ide_shutdown,
-+	.dev_attrs	= ide_dev_attrs,
-+	.suspend	= generic_ide_suspend,
-+	.resume		= generic_ide_resume,
-+};
-+
-+EXPORT_SYMBOL_GPL(ide_bus_type);
-+
-+/*
-+ * This is gets invoked once during initialization, to set *everything* up
-+ */
-+static int __init ide_init(void)
-+{
-+	int ret;
-+
-+	printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n");
-+	system_bus_speed = ide_system_bus_speed();
-+
-+	ret = bus_register(&ide_bus_type);
-+	if (ret < 0) {
-+		printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
-+		return ret;
-+	}
-+
-+	init_ide_data();
-+
-+#ifdef CONFIG_PROC_FS
-+	proc_ide_root = proc_mkdir("ide", NULL);
-+#endif
-+
-+#ifdef CONFIG_BLK_DEV_ALI14XX
-+	if (probe_ali14xx)
-+		(void)ali14xx_init();
-+#endif
-+#ifdef CONFIG_BLK_DEV_UMC8672
-+	if (probe_umc8672)
-+		(void)umc8672_init();
-+#endif
-+#ifdef CONFIG_BLK_DEV_DTC2278
-+	if (probe_dtc2278)
-+		(void)dtc2278_init();
-+#endif
-+#ifdef CONFIG_BLK_DEV_HT6560B
-+	if (probe_ht6560b)
-+		(void)ht6560b_init();
-+#endif
-+#ifdef CONFIG_BLK_DEV_QD65XX
-+	if (probe_qd65xx)
-+		(void)qd65xx_init();
-+#endif
-+
-+	initializing = 1;
-+	/* Probe for special PCI and other "known" interface chipsets. */
-+	probe_for_hwifs();
-+	initializing = 0;
-+
-+#ifdef CONFIG_PROC_FS
-+	proc_ide_create();
-+#endif
-+	return 0;
-+}
-+
-+#ifdef MODULE
-+static char *options = NULL;
-+module_param(options, charp, 0);
-+MODULE_LICENSE("GPL");
-+
-+static void __init parse_options (char *line)
-+{
-+	char *next = line;
-+
-+	if (line == NULL || !*line)
-+		return;
-+	while ((line = next) != NULL) {
-+ 		if ((next = strchr(line,' ')) != NULL)
-+			*next++ = 0;
-+		if (!ide_setup(line))
-+			printk (KERN_INFO "Unknown option '%s'\n", line);
-+	}
-+}
-+
-+int __init init_module (void)
-+{
-+	parse_options(options);
-+	return ide_init();
-+}
-+
-+void cleanup_module (void)
-+{
-+	int index;
-+
-+	for (index = 0; index < MAX_HWIFS; ++index)
-+		ide_unregister(index);
-+
-+#ifdef CONFIG_PROC_FS
-+	proc_ide_destroy();
-+#endif
-+
-+	bus_unregister(&ide_bus_type);
-+}
-+
-+#else /* !MODULE */
-+
-+__setup("", ide_setup);
-+
-+module_init(ide_init);
-+
-+#endif /* MODULE */
 diff -purN linux.old/drivers/ide/Kconfig linux.dev/drivers/ide/Kconfig
 --- linux.old/drivers/ide/Kconfig	2007-01-10 20:10:37.000000000 +0100
 +++ linux.dev/drivers/ide/Kconfig	2007-04-09 01:15:27.570515264 +0200
@@ -2151,156 +48,3 @@ diff -purN linux.old/drivers/ide/Makefile linux.dev/drivers/ide/Makefile
  
  # built-in only drivers from h8300/
  ide-core-$(CONFIG_H8300)		+= h8300/ide-h8300.o
-diff -purN linux.old/drivers/ide/ppc/magicbox_ide.c linux.dev/drivers/ide/ppc/magicbox_ide.c
---- linux.old/drivers/ide/ppc/magicbox_ide.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/ide/ppc/magicbox_ide.c	2007-04-09 01:25:39.119545680 +0200
-@@ -0,0 +1,149 @@
-+/* Driver for MagicBox 2.0 onboard CompactFlash adapter.
-+ * Written by Wojtek Kaniewski <wojtekka@toxygen.net>
-+ *
-+ * GNU General Public License.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/mm.h>
-+#include <linux/interrupt.h>
-+#include <linux/blkdev.h>
-+#include <linux/hdreg.h>
-+#include <linux/ide.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+
-+
-+#define UIC0_PR 0xc4
-+#define UIC0_TR 0xc5
-+#define IRQ 25
-+
-+static int ide_offsets[IDE_NR_PORTS] = {0, 2, 4, 6, 8, 10, 12, 14, -1, -1};
-+
-+static u8 magicbox_ide_inb (unsigned long port)
-+{
-+	return (u8) (readw((void __iomem *) port) >> 8) & 255;
-+}
-+
-+static u16 magicbox_ide_inw (unsigned long port)
-+{
-+	return (u16) readw((void __iomem *) port);
-+}
-+
-+static void magicbox_ide_insw (unsigned long port, void *addr, u32 count)
-+{
-+	u16 *ptr;
-+
-+	for (ptr = addr; count--; ptr++)
-+		*ptr = readw((void __iomem *) port);
-+}
-+
-+static u32 magicbox_ide_inl (unsigned long port)
-+{
-+	return (u32) readl((void __iomem *) port);
-+}
-+
-+static void magicbox_ide_insl (unsigned long port, void *addr, u32 count)
-+{
-+	u32 *ptr;
-+
-+	for (ptr = addr; count--; ptr++)
-+		*ptr = readl((void __iomem *) port);
-+}
-+
-+static void magicbox_ide_outb (u8 value, unsigned long port)
-+{
-+	writew(value << 8, (void __iomem *) port);
-+}
-+
-+static void magicbox_ide_outbsync (ide_drive_t *drive, u8 value, unsigned long port)
-+{
-+	writew(value << 8, (void __iomem *) port);
-+}
-+
-+static void magicbox_ide_outw (u16 value, unsigned long port)
-+{
-+	writew(value, (void __iomem *) port);
-+}
-+
-+static void magicbox_ide_outsw (unsigned long port, void *addr, u32 count)
-+{
-+	u16 *ptr;
-+
-+	for (ptr = addr; count--; ptr++)
-+		writew(*ptr, (void __iomem *) port);
-+}
-+
-+static void magicbox_ide_outl (u32 value, unsigned long port)
-+{
-+	writel(value, (void __iomem *) port);
-+}
-+
-+static void magicbox_ide_outsl (unsigned long port, void *addr, u32 count)
-+{
-+	u32 *ptr;
-+
-+	for (ptr = addr; count--; ptr++)
-+		writel(*ptr, (void __iomem *) port);
-+}
-+
-+
-+static void __init ide_magicbox_register(unsigned long addr,
-+					 unsigned long caddr, int irq)
-+{
-+	hw_regs_t hw;
-+	ide_hwif_t *hwif;
-+
-+  	memset(&hw, 0, sizeof(hw));
-+	ide_setup_ports(&hw, addr, ide_offsets, caddr + 12, 0, NULL,irq);
-+
-+	if (ide_register_hw(&hw, &hwif) != -1)
-+	{
-+		printk(KERN_NOTICE "magicbox-ide: Registered IDE-CF driver\n");
-+		hwif->mmio = 2;
-+		hwif->drives[0].unmask = 1;
-+		hwif->OUTB = magicbox_ide_outb;
-+		hwif->OUTBSYNC = magicbox_ide_outbsync;
-+		hwif->OUTW = magicbox_ide_outw;
-+		hwif->OUTL = magicbox_ide_outl;
-+		hwif->OUTSW = magicbox_ide_outsw;
-+		hwif->OUTSL = magicbox_ide_outsl;
-+		hwif->INB = magicbox_ide_inb;
-+		hwif->INW = magicbox_ide_inw;
-+		hwif->INL = magicbox_ide_inl;
-+		hwif->INSW = magicbox_ide_insw;
-+		hwif->INSL = magicbox_ide_insl;
-+	}
-+}
-+
-+void __init ide_magicbox_init(void)
-+{
-+	volatile u16 *addr;
-+	volatile u16 *caddr;
-+
-+	/* Turn on PerWE instead of PCIsomething */
-+	mtdcr(DCRN_CPC0_PCI_BASE, mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
-+
-+	/* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
-+	mtdcr(DCRN_EBC_BASE, 1);
-+	mtdcr(DCRN_EBC_BASE + 1, 0xff11a000);
-+	mtdcr(DCRN_EBC_BASE, 0x11);
-+	mtdcr(DCRN_EBC_BASE + 1, 0x080bd800);
-+
-+	/* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
-+	mtdcr(DCRN_EBC_BASE, 2);
-+	mtdcr(DCRN_EBC_BASE + 1, 0xff21a000);
-+	mtdcr(DCRN_EBC_BASE, 0x12);
-+	mtdcr(DCRN_EBC_BASE + 1, 0x080bd800);
-+
-+	/* Remap physical address space */
-+	addr = ioremap_nocache(0xff100000, 4096);
-+	caddr = ioremap_nocache(0xff200000, 4096);
-+
-+	/* Set interrupt to low-to-high-edge-triggered */
-+	mtdcr(UIC0_TR, mfdcr(UIC0_TR) & ~(0x80000000L >> IRQ));
-+	mtdcr(UIC0_PR, mfdcr(UIC0_PR) | (0x80000000L >> IRQ));
-+
-+	ide_magicbox_register((unsigned long)addr, (unsigned long)caddr, IRQ);
-+}
-+