brcm43xx: update SSB driver

* files/ now contains the wireless-dev tree version * patches/210-ssb_merge is nbd's subsequent changes git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7691 3c298f89-4303-0410-b956-a3cf2f4a3e73
author: noz <noz@3c298f89-4303-0410-b956-a3cf2f4a3e73> 2007-06-21 20:10:50 +0000
committer: noz <noz@3c298f89-4303-0410-b956-a3cf2f4a3e73> 2007-06-21 20:10:50 +0000
commit: 6546ee2d5f04d335314782ca0577901b7c2d83b0 (patch)
tree: b8c2124cfa4e97458937733d65bfac60ff625457 /target/linux
parent: ebd093f2fa1855b10efdc70772e1024dd37b1a4a (diff)
19 files changed, 1841 insertions, 335 deletions
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/Kconfig b/target/linux/brcm47xx-2.6/files/drivers/ssb/Kconfig
index 09330dfa6..03c494586 100644
--- a/target/linux/brcm47xx-2.6/files/drivers/ssb/Kconfig
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/Kconfig
@@ -71,4 +71,23 @@ config SSB_PCICORE_HOSTMODE
 	help
 	  PCIcore hostmode operation (external PCI bus).
 
+config SSB_DRIVER_MIPS
+	bool "SSB Broadcom MIPS core driver"
+	depends on SSB && MIPS
+	select SSB_SERIAL
+	help
+	  Driver for the Sonics Silicon Backplane attached
+	  Broadcom MIPS core.
+
+	  If unsure, say N
+
+config SSB_DRIVER_EXTIF
+	bool "SSB Broadcom EXTIF core driver"
+	depends on SSB_DRIVER_MIPS
+	help
+	  Driver for the Sonics Silicon Backplane attached
+	  Broadcom EXTIF core.
+
+	  If unsure, say N
+
 endmenu
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/Makefile b/target/linux/brcm47xx-2.6/files/drivers/ssb/Makefile
index 9f85d225d..9a2b379fb 100644
--- a/target/linux/brcm47xx-2.6/files/drivers/ssb/Makefile
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/Makefile
@@ -1,14 +1,11 @@
-ssb-driver-chipcommon-y				:= driver_chipcommon/chipcommon.o
-ssb-driver-mips-$(CONFIG_BCM947XX)	:= driver_mips/mips.o
-ssb-driver-pci-$(CONFIG_SSB_DRIVER_PCICORE)	:= driver_pci/pcicore.o
+ssb-builtin-drivers-y					+= driver_chipcommon.o
+ssb-builtin-drivers-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
+ssb-builtin-drivers-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
 
-ssb-$(CONFIG_SSB_PCIHOST)			+= pci.o
-ssb-$(CONFIG_SSB_PCMCIAHOST)			+= pcmcia.o
+ssb-hostsupport-$(CONFIG_SSB_PCIHOST)			+= pci.o pcihost_wrapper.o
+ssb-hostsupport-$(CONFIG_SSB_PCMCIAHOST)		+= pcmcia.o
 
 obj-$(CONFIG_SSB) += ssb.o
 
-ssb-objs	:= core.o scan.o \
-		   $(ssb-y) $(ssb-m) \
-		   $(ssb-driver-chipcommon-y) \
-		   $(ssb-driver-mips-y) \
-		   $(ssb-driver-pci-y)
+ssb-objs	:= main.o scan.o \
+		   $(ssb-hostsupport-y) $(ssb-builtin-drivers-y)
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon/chipcommon.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon.c
index a17910947..8e511c77b 100644
--- a/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon/chipcommon.c
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon.c
@@ -12,7 +12,7 @@
 #include <linux/ssb/ssb_regs.h>
 #include <linux/pci.h>
 
-#include "../ssb_private.h"
+#include "ssb_private.h"
 
 
 /* Clock sources */
@@ -39,7 +39,6 @@ static inline void chipco_write32(struct ssb_chipcommon *cc,
 	ssb_write32(cc->dev, offset, value);
 }
 
-
 void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
 			      enum ssb_clkmode mode)
 {
@@ -89,7 +88,6 @@ void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
 		assert(0);
 	}
 }
-EXPORT_SYMBOL(ssb_chipco_set_clockmode);
 
 /* Get the Slow Clock Source */
 static int chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
@@ -98,8 +96,8 @@ static int chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
 	u32 tmp = 0;
 
 	if (cc->dev->id.revision < 6) {
-		if (bus->bustype == SSB_BUSTYPE_SSB /*TODO ||
-		    bus->bustype == SSB_BUSTYPE_PCMCIA*/)
+		if (bus->bustype == SSB_BUSTYPE_SSB ||
+		    bus->bustype == SSB_BUSTYPE_PCMCIA)
 			return SSB_CHIPCO_CLKSRC_XTALOS;
 		if (bus->bustype == SSB_BUSTYPE_PCI) {
 			pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
@@ -246,8 +244,8 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc)
 {
 	if (!cc->dev)
 		return; /* We don't have a ChipCommon */
-	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 	chipco_powercontrol_init(cc);
+	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 	calc_fast_powerup_delay(cc);
 }
 
@@ -262,37 +260,8 @@ void ssb_chipco_resume(struct ssb_chipcommon *cc)
 {
 	if (!cc->dev)
 		return;
-	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 	chipco_powercontrol_init(cc);
-}
-
-void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, u32 chip_id, u32 *rate,
-			     u32 *plltype, u32 *n, u32 *m)
-{
-	*rate = 0;
-	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
-	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
-	switch (*plltype) {
-		case SSB_PLLTYPE_2:
-		case SSB_PLLTYPE_4:
-		case SSB_PLLTYPE_6:
-		case SSB_PLLTYPE_7:
-			*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
-			break;
-		case SSB_PLLTYPE_5:
-			*rate = 200000000;
-			break;
-		case SSB_PLLTYPE_3:
-			/* 5350 uses m2 to control mips */
-			*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
-			break;
-		default:
-			*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
-			break;
-	}
-
-	if (*rate == 0 && chip_id == 0x5365)
-		*rate = 200000000;
+	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 }
 
 void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
@@ -351,6 +320,7 @@ void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
 	}
 }
 
+
 #ifdef CONFIG_SSB_SERIAL
 int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
 			   struct ssb_serial_port *ports)
@@ -430,13 +400,3 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
 	return nr_ports;
 }
 #endif /* CONFIG_SSB_SERIAL */
-
-/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
-int
-ssb_chipco_watchdog(struct ssb_chipcommon *cc, uint ticks)
-{
-	/* instant NMI */
-	chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
-	return 0;
-}
-EXPORT_SYMBOL(ssb_chipco_watchdog);
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_mips/mips.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_mipscore.c
index 7b3880ab0..67d10178b 100644
--- a/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_mips/mips.c
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_mipscore.c
@@ -4,7 +4,6 @@
  *
  * Copyright 2005, Broadcom Corporation
  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
- * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
@@ -16,12 +15,21 @@
 #include <linux/serial_reg.h>
 #include <asm/time.h>
 
-#include "../ssb_private.h"
+#include "ssb_private.h"
 
-#define mips_read32(mcore, offset) ssb_read32((mcore)->dev, offset)
-#define mips_write32(mcore, offset, value) ssb_write32((mcore)->dev, offset, value)
-#define extif_read32(extif, offset) ssb_read32((extif)->dev, offset)
-#define extif_write32(extif, offset, value) ssb_write32((extif)->dev, offset, value)
+
+static inline u32 mips_read32(struct ssb_mipscore *mcore,
+			      u16 offset)
+{
+	return ssb_read32(mcore->dev, offset);
+}
+
+static inline void mips_write32(struct ssb_mipscore *mcore,
+				u16 offset,
+				u32 value)
+{
+	ssb_write32(mcore->dev, offset, value);
+}
 
 static const u32 ipsflag_irq_mask[] = {
 	0,
@@ -109,8 +117,17 @@ static void set_irq(struct ssb_device *dev, unsigned int irq)
 	ssb_write32(mdev, SSB_IPSFLAG, irqflag);
 }
 
-static int ssb_extif_serial_init(struct ssb_extif *dev, struct ssb_serial_port *ports)
+/* XXX: leave here or move into separate extif driver? */
+static int ssb_extif_serial_init(struct ssb_device *dev, struct ssb_serial_ports *ports)
+{
+
+}
+
+
+static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
 {
+	struct ssb_bus *bus = mcore->dev->bus;
+
 	//TODO if (EXTIF available
 #if 0
 		extifregs_t *eir = (extifregs_t *) regs;
@@ -145,14 +162,6 @@ static int ssb_extif_serial_init(struct ssb_extif *dev, struct ssb_serial_port *
 				add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
 
 #endif
-
-}
-
-
-static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
-{
-	struct ssb_bus *bus = mcore->dev->bus;
-
 	if (bus->extif.dev)
 		mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
 	else if (bus->chipco.dev)
@@ -165,68 +174,18 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
 {
 	struct ssb_bus *bus = mcore->dev->bus;
 
-	mcore->flash_buswidth = 2;
 	if (bus->chipco.dev) {
 		mcore->flash_window = 0x1c000000;
-		mcore->flash_window_size = 0x02000000;
-		if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
-				& SSB_CHIPCO_CFG_DS16) == 0)
-			mcore->flash_buswidth = 1;
+		mcore->flash_window_size = 0x800000;
 	} else {
 		mcore->flash_window = 0x1fc00000;
-		mcore->flash_window_size = 0x00400000;
+		mcore->flash_window_size = 0x400000;
 	}
 }
 
-static void ssb_extif_timing_init(struct ssb_extif *extif, u32 ns)
-{
-	u32 tmp;
-
-	/* Initialize extif so we can get to the LEDs and external UART */
-	extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN);
-	
-	/* Set timing for the flash */
-	tmp  = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT;
-	tmp |= ceildiv(40, ns) << SSB_PROG_WCNT_1_SHIFT;
-	tmp |= ceildiv(120, ns);
-	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
-
-	/* Set programmable interface timing for external uart */
-	tmp  = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT;
-	tmp |= ceildiv(20, ns) << SSB_PROG_WCNT_2_SHIFT;
-	tmp |= ceildiv(100, ns) << SSB_PROG_WCNT_1_SHIFT;
-	tmp |= ceildiv(120, ns);
-	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
-}
-
-static inline void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
-				 u32 *pll_type, u32 *n, u32 *m)
-{
-	*pll_type = SSB_PLLTYPE_1;
-	*n = extif_read32(extif, SSB_EXTIF_CLOCK_N);
-	*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
-}
 
-u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
+static void ssb_cpu_clock(struct ssb_mipscore *mcore)
 {
-	struct ssb_bus *bus = mcore->dev->bus;
-	u32 pll_type, n, m, rate = 0;
-
-	if (bus->extif.dev) {
-		ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
-	} else if (bus->chipco.dev) {
-		ssb_chipco_get_clockcpu(&bus->chipco, bus->chip_id, &rate,
-			&pll_type, &n, &m);
-	} else
-		return 0;
-
-	if (rate == 0)
-		rate = ssb_calc_clock_rate(pll_type, n, m);
-
-	if (pll_type == SSB_PLLTYPE_6)
-		rate *= 2;
-
-	return rate;
 }
 
 void ssb_mipscore_init(struct ssb_mipscore *mcore)
@@ -246,9 +205,28 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
 		hz = 100000000;
 	ns = 1000000000 / hz;
 
-	if (bus->extif.dev)
-		ssb_extif_timing_init(&bus->extif, ns);
-	else if (bus->chipco.dev)
+//TODO
+#if 0
+	if (have EXTIF) {
+		/* Initialize extif so we can get to the LEDs and external UART */
+		W_REG(&eir->prog_config, CF_EN);
+
+		/* Set timing for the flash */
+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
+		tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
+		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
+		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
+
+		/* Set programmable interface timing for external uart */
+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
+		tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
+		tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
+		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
+		W_REG(&eir->prog_waitcount, tmp);
+	}
+	else... chipcommon
+#endif
+	if (bus->chipco.dev)
 		ssb_chipco_timing_init(&bus->chipco, ns);
 
 	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
@@ -278,5 +256,3 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
 	ssb_mips_serial_init(mcore);
 	ssb_mips_flash_detect(mcore);
 }
-
-EXPORT_SYMBOL(ssb_mips_irq);
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_pci/pcicore.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_pcicore.c
index 3ad97036f..a59dff083 100644
--- a/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_pci/pcicore.c
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_pcicore.c
@@ -12,7 +12,8 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 
-#include "../ssb_private.h"
+#include "ssb_private.h"
+
 
 static inline
 u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
@@ -92,9 +93,6 @@ static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
 
 	/* Enable PCI bridge BAR1 prefetch and burst */
 	pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
-
-	/* Make sure our latency is high enough to handle the devices behind us */
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
 
@@ -112,7 +110,7 @@ static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
 
 	if (unlikely(pc->cardbusmode && dev > 1))
 		goto out;
-	if (bus == 0) {//FIXME busnumber ok?
+	if (bus == 0) {
 		/* Type 0 transaction */
 		if (unlikely(dev >= SSB_PCI_SLOT_MAX))
 			goto out;
@@ -164,7 +162,8 @@ static int ssb_extpci_read_config(struct ssb_pcicore *pc,
 		val = 0xffffffff;
 		goto unmap;
 	}
-	
+
+	val = readl(mmio);
 	val >>= (8 * (off & 3));
 
 	switch (len) {
@@ -212,10 +211,12 @@ static int ssb_extpci_write_config(struct ssb_pcicore *pc,
 
 	switch (len) {
 	case 1:
+		val = readl(mmio);
 		val &= ~(0xFF << (8 * (off & 3)));
 		val |= *((const u8 *)buf) << (8 * (off & 3));
 		break;
 	case 2:
+		val = readl(mmio);
 		val &= ~(0xFFFF << (8 * (off & 3)));
 		val |= *((const u16 *)buf) << (8 * (off & 3));
 		break;
@@ -223,7 +224,7 @@ static int ssb_extpci_write_config(struct ssb_pcicore *pc,
 		val = *((const u32 *)buf);
 		break;
 	}
-	writel(val, mmio);
+	writel(*((const u32 *)buf), mmio);
 
 	err = 0;
 unmap:
@@ -290,7 +291,10 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
 {
 	u32 val;
 
-	assert(!extpci_core);
+	if (extpci_core) {
+		WARN_ON(1);
+		return;
+	}
 	extpci_core = pc;
 
 	ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
@@ -303,8 +307,6 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
 	udelay(150);
 	val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */
 	pcicore_write32(pc, SSB_PCICORE_CTL, val);
-	val = SSB_PCICORE_ARBCTL_INTERN;
-	pcicore_write32(pc, SSB_PCICORE_ARBCTL, val); 
 	udelay(1);
 
 	//TODO cardbus mode
@@ -321,7 +323,10 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
 
 	/* Enable PCI bridge BAR0 prefetch and burst */
 	val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 4);
+	ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);
+	/* Clear error conditions */
+	val = 0;
+	ssb_extpci_write_config(pc, 0, 0, 0, PCI_STATUS, &val, 2);
 
 	/* Enable PCI interrupts */
 	pcicore_write32(pc, SSB_PCICORE_IMASK,
@@ -331,7 +336,6 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
 	 * The following needs change, if we want to port hostmode
 	 * to non-MIPS platform. */
 	set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000));
-	mdelay(300);
 	register_pci_controller(&ssb_pcicore_controller);
 }
 
@@ -383,7 +387,8 @@ void ssb_pcicore_init(struct ssb_pcicore *pc)
 	if (!dev)
 		return;
 	bus = dev->bus;
-	ssb_device_enable(dev, 0);
+	if (!ssb_device_is_enabled(dev))
+		ssb_device_enable(dev, 0);
 
 #ifdef CONFIG_SSB_PCICORE_HOSTMODE
 	pc->hostmode = pcicore_is_in_hostmode(pc);
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/core.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/main.c
index 2ee13d2d3..a2d22312c 100644
--- a/target/linux/brcm47xx-2.6/files/drivers/ssb/core.c
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/main.c
@@ -35,35 +35,55 @@ static LIST_HEAD(buses);
 static int nr_buses;
 static DEFINE_MUTEX(buses_mutex);
 
-#define ssb_buses_lock() do {			\
-	if (!is_early_boot())			\
-		mutex_lock(&buses_mutex);	\
-			} while (0)
+static void ssb_buses_lock(void);
+static void ssb_buses_unlock(void);
 
-#define ssb_buses_unlock() do {			\
-	if (!is_early_boot())			\
-		mutex_unlock(&buses_mutex);	\
-			} while (0)
 
+#ifdef CONFIG_SSB_PCIHOST
+struct ssb_bus * ssb_pci_dev_to_bus(struct pci_dev *pdev)
+{
+	struct ssb_bus *bus;
+
+	ssb_buses_lock();
+	list_for_each_entry(bus, &buses, list) {
+		if (bus->bustype == SSB_BUSTYPE_PCI &&
+		    bus->host_pci == pdev)
+			goto found;
+	}
+	bus = NULL;
+found:
+	ssb_buses_unlock();
+
+	return bus;
+}
+#endif /* CONFIG_SSB_PCIHOST */
 
 static struct ssb_device * ssb_device_get(struct ssb_device *dev)
 {
 	if (dev)
-		get_device(&dev->dev);
+		get_device(dev->dev);
 	return dev;
 }
 
 static void ssb_device_put(struct ssb_device *dev)
 {
 	if (dev)
-		put_device(&dev->dev);
+		put_device(dev->dev);
 }
 
-static void ssb_bus_resume(struct ssb_bus *bus)
+static int ssb_bus_resume(struct ssb_bus *bus)
 {
-printk("SSB BUS RESUME\n");
+	int err;
+
 	ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
+	err = ssb_pcmcia_init(bus);
+	if (err) {
+		/* No need to disable XTAL, as we don't have one on PCMCIA. */
+		return err;
+	}
 	ssb_chipco_resume(&bus->chipco);
+
+	return 0;
 }
 
 static int ssb_device_resume(struct device *dev)
@@ -73,10 +93,12 @@ static int ssb_device_resume(struct device *dev)
 	struct ssb_bus *bus;
 	int err = 0;
 
-printk("SSB DEV RESUME\n");
 	bus = ssb_dev->bus;
-	if (bus->suspend_cnt == bus->nr_devices)
-		ssb_bus_resume(bus);
+	if (bus->suspend_cnt == bus->nr_devices) {
+		err = ssb_bus_resume(bus);
+		if (err)
+			return err;
+	}
 	bus->suspend_cnt--;
 	if (dev->driver) {
 		ssb_drv = drv_to_ssb_drv(dev->driver);
@@ -91,9 +113,15 @@ out:
 
 static void ssb_bus_suspend(struct ssb_bus *bus, pm_message_t state)
 {
-printk("SSB BUS SUSPEND\n");
-//	ssb_chipco_suspend(&bus->chipco, state);
-//	ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
+	ssb_chipco_suspend(&bus->chipco, state);
+	ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
+
+	/* Reset HW state information in memory, so that HW is
+	 * completely reinitialized on resume. */
+	bus->mapped_device = NULL;
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+	bus->pcicore.setup_done = 0;
+#endif
 }
 
 static int ssb_device_suspend(struct device *dev, pm_message_t state)
@@ -103,7 +131,6 @@ static int ssb_device_suspend(struct device *dev, pm_message_t state)
 	struct ssb_bus *bus;
 	int err = 0;
 
-printk("SSB DEV SUSPEND\n");
 	if (dev->driver) {
 		ssb_drv = drv_to_ssb_drv(dev->driver);
 		if (ssb_drv && ssb_drv->suspend)
@@ -123,6 +150,57 @@ out:
 	return err;
 }
 
+#ifdef CONFIG_SSB_PCIHOST
+int ssb_devices_freeze(struct ssb_bus *bus)
+{
+	struct ssb_device *dev;
+	struct ssb_driver *drv;
+	int err = 0;
+	int i;
+	pm_message_t state = PMSG_FREEZE;
+
+	for (i = 0; i < bus->nr_devices; i++) {
+		dev = &(bus->devices[i]);
+		if (!dev->dev->driver)
+			continue;
+		if (!device_is_registered(dev->dev))
+			continue;
+		drv = drv_to_ssb_drv(dev->dev->driver);
+		if (drv && drv->suspend) {
+			err = drv->suspend(dev, state);
+			if (err)
+				goto out;
+		}
+	}
+out:
+	return err;
+}
+
+int ssb_devices_thaw(struct ssb_bus *bus)
+{
+	struct ssb_device *dev;
+	struct ssb_driver *drv;
+	int err = 0;
+	int i;
+
+	for (i = 0; i < bus->nr_devices; i++) {
+		dev = &(bus->devices[i]);
+		if (!dev->dev->driver)
+			continue;
+		if (!device_is_registered(dev->dev))
+			continue;
+		drv = drv_to_ssb_drv(dev->dev->driver);
+		if (drv && drv->resume) {
+			err = drv->resume(dev);
+			if (err)
+				goto out;
+		}
+	}
+out:
+	return err;
+}
+#endif /* CONFIG_SSB_PCIHOST */
+
 static void ssb_device_shutdown(struct device *dev)
 {
 	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
@@ -193,7 +271,7 @@ static int ssb_bus_match(struct device *dev, struct device_driver *drv)
 	return 0;
 }
 
-struct bus_type ssb_bustype = {
+static struct bus_type ssb_bustype = {
 	.name		= NULL, /* Intentionally NULL to indicate early boot */
 	.match		= ssb_bus_match,
 	.probe		= ssb_device_probe,
@@ -205,51 +283,156 @@ struct bus_type ssb_bustype = {
 
 #define is_early_boot()		(ssb_bustype.name == NULL)
 
-void ssb_bus_unregister(struct ssb_bus *bus)
+static void ssb_buses_lock(void)
 {
-	struct ssb_device *dev;
+	if (!is_early_boot())
+		mutex_lock(&buses_mutex);
+}
+
+static void ssb_buses_unlock(void)
+{
+	if (!is_early_boot())
+		mutex_unlock(&buses_mutex);
+}
+
+static void ssb_devices_unregister(struct ssb_bus *bus)
+{
+	struct ssb_device *sdev;
 	int i;
 
-	ssb_buses_lock();
 	for (i = bus->nr_devices - 1; i >= 0; i--) {
-		dev = &(bus->devices[i]);
-		device_unregister(&dev->dev);
+		sdev = &(bus->devices[i]);
+		if (sdev->dev)
+			device_unregister(sdev->dev);
 	}
+}
+
+void ssb_bus_unregister(struct ssb_bus *bus)
+{
+	ssb_buses_lock();
+	ssb_devices_unregister(bus);
 	list_del(&bus->list);
 	ssb_buses_unlock();
 
+	/* ssb_pcmcia_exit(bus); */
+	ssb_pci_exit(bus);
 	ssb_iounmap(bus);
 }
 EXPORT_SYMBOL(ssb_bus_unregister);
 
 static void ssb_release_dev(struct device *dev)
 {
-	/* Nothing, devices are allocated together with struct ssb_bus. */
+	struct __ssb_dev_wrapper *devwrap;
+
+	devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
+	kfree(devwrap);
+}
+
+static int ssb_devices_register(struct ssb_bus *bus)
+{
+	struct ssb_device *sdev;
+	struct device *dev;
+	struct __ssb_dev_wrapper *devwrap;
+	int i, err = 0;
+	int dev_idx = 0;
+
+	for (i = 0; i < bus->nr_devices; i++) {
+		sdev = &(bus->devices[i]);
+
+		/* We don't register SSB-system devices to the kernel,
+		 * as the drivers for them are built into SSB. */
+		switch (sdev->id.coreid) {
+		case SSB_DEV_CHIPCOMMON:
+		case SSB_DEV_PCI:
+		case SSB_DEV_PCIE:
+		case SSB_DEV_PCMCIA:
+		case SSB_DEV_MIPS:
+		case SSB_DEV_MIPS_3302:
+		case SSB_DEV_EXTIF:
+			continue;
+		}
+
+		devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+		if (!devwrap) {
+			ssb_printk(KERN_ERR PFX
+				   "Could not allocate device\n");
+			err = -ENOMEM;
+			goto error;
+		}
+		dev = &devwrap->dev;
+		devwrap->sdev = sdev;
+
+		dev->release = ssb_release_dev;
+		dev->bus = &ssb_bustype;
+		snprintf(dev->bus_id, sizeof(dev->bus_id),
+			 "ssb%d:%d", bus->busnumber, dev_idx);
+
+		switch (bus->bustype) {
+		case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
+			sdev->irq = bus->host_pci->irq;
+			dev->parent = &bus->host_pci->dev;
+#endif
+			break;
+		case SSB_BUSTYPE_PCMCIA:
+#ifdef CONFIG_SSB_PCMCIAHOST
+			dev->parent = &bus->host_pcmcia->dev;
+#endif
+			break;
+		case SSB_BUSTYPE_SSB:
+			break;
+		}
+
+		sdev->dev = dev;
+		err = device_register(dev);
+		if (err) {
+			ssb_printk(KERN_ERR PFX
+				   "Could not register %s\n",
+				   dev->bus_id);
+			/* Set dev to NULL to not unregister
+			 * dev on error unwinding. */
+			sdev->dev = NULL;
+			kfree(devwrap);
+			goto error;
+		}
+		dev_idx++;
+	}
+
+	return 0;
+error:
+	/* Unwind the already registered devices. */
+	ssb_devices_unregister(bus);
+	return err;
 }
 
 /* Needs ssb_buses_lock() */
 static int ssb_attach_queued_buses(void)
 {
 	struct ssb_bus *bus, *n;
-	struct ssb_device *dev;
-	int i, err;
+	int err = 0;
+	int drop_them_all = 0;
 
 	list_for_each_entry_safe(bus, n, &attach_queue, list) {
+		if (drop_them_all) {
+			list_del(&bus->list);
+			continue;
+		}
+		/* Can't init the PCIcore in ssb_bus_register(), as that
+		 * is too early in boot for embedded systems
+		 * (no udelay() available). So do it here in attach stage.
+		 */
 		ssb_pcicore_init(&bus->pcicore);
-		for (i = 0; i < bus->nr_devices; i++) {
-			dev = &(bus->devices[i]);
-
-			dev->dev.release = ssb_release_dev;
-			err = device_register(&dev->dev);
-			if (err) {
-				ssb_printk(KERN_ERR PFX
-					   "Could not register %s\n",
-					   dev->dev.bus_id);
-			}
+
+		err = ssb_devices_register(bus);
+		if (err) {
+			drop_them_all = 1;
+			list_del(&bus->list);
+			continue;
 		}
 		list_move_tail(&bus->list, &buses);
 	}
-	return 0;
+
+	return err;
 }
 
 static void ssb_get_boardtype(struct ssb_bus *bus)
@@ -307,23 +490,6 @@ static int ssb_bus_register(struct ssb_bus *bus,
 {
 	int err;
 
-	ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on ");
-	switch (bus->bustype) {
-	case SSB_BUSTYPE_SSB:
-		ssb_printk("address 0x%08lX\n", baseaddr);
-		break;
-	case SSB_BUSTYPE_PCI:
-#ifdef CONFIG_SSB_PCIHOST
-		ssb_printk("PCI device %s\n", bus->host_pci->dev.bus_id);
-#endif
-		break;
-	case SSB_BUSTYPE_PCMCIA:
-#ifdef CONFIG_SSB_PCMCIAHOST
-		ssb_printk("PCMCIA device %s\n", bus->host_pcmcia->devname);
-#endif
-		break;
-	}
-
 	spin_lock_init(&bus->bar_lock);
 	INIT_LIST_HEAD(&bus->list);
 
@@ -346,7 +512,7 @@ static int ssb_bus_register(struct ssb_bus *bus,
 	/* Init PCMCIA-host device (if any) */
 	err = ssb_pcmcia_init(bus);
 	if (err)
-		goto err_unmap;
+		goto err_pci_exit;
 
 	/* Initialize basic system devices (if available) */
 	ssb_chipcommon_init(&bus->chipco);
@@ -368,12 +534,16 @@ out:
 
 err_dequeue:
 	list_del(&bus->list);
+/* err_pcmcia_exit: */
+/*	ssb_pcmcia_exit(bus); */
+err_pci_exit:
+	ssb_pci_exit(bus);
 err_unmap:
 	ssb_iounmap(bus);
 err_disable_xtal:
 	ssb_buses_unlock();
 	ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
-	goto out;
+	return err;
 }
 
 #ifdef CONFIG_SSB_PCIHOST
@@ -387,6 +557,10 @@ int ssb_bus_pcibus_register(struct ssb_bus *bus,
 	bus->ops = &ssb_pci_ops;
 
 	err = ssb_bus_register(bus, 0);
+	if (!err) {
+		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+			   "PCI device %s\n", host_pci->dev.bus_id);
+	}
 
 	return err;
 }
@@ -407,6 +581,10 @@ int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
 	fill_sprom(&bus->sprom);
 
 	err = ssb_bus_register(bus, baseaddr);
+	if (!err) {
+		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+			   "PCMCIA device %s\n", pcmcia_dev->devname);
+	}
 
 	return err;
 }
@@ -422,7 +600,12 @@ int ssb_bus_ssbbus_register(struct ssb_bus *bus,
 	bus->bustype = SSB_BUSTYPE_SSB;
 	bus->ops = &ssb_ssb_ops;
 	fill_sprom(&bus->sprom);
+
 	err = ssb_bus_register(bus, baseaddr);
+	if (!err) {
+		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
+			   "address 0x%08lX\n", baseaddr);
+	}
 
 	return err;
 }
@@ -603,12 +786,29 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
 }
 EXPORT_SYMBOL(ssb_clockspeed);
 
+static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
+{
+	/* The REJECT bit changed position in TMSLOW between
+	 * Backplane revisions. */
+	switch (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV) {
+	case SSB_IDLOW_SSBREV_22:
+		return SSB_TMSLOW_REJECT_22;
+	case SSB_IDLOW_SSBREV_23:
+		return SSB_TMSLOW_REJECT_23;
+	default:
+		assert(0);
+	}
+	return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
+}
+
 int ssb_device_is_enabled(struct ssb_device *dev)
 {
 	u32 val;
+	u32 reject;
 
+	reject = ssb_tmslow_reject_bitmask(dev);
 	val = ssb_read32(dev, SSB_TMSLOW);
-	val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT;
+	val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
 
 	return (val == SSB_TMSLOW_CLOCK);
 }
@@ -677,22 +877,25 @@ static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
 
 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
 {
+	u32 reject;
+
 	if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
 		return;
 
-	ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_REJECT | SSB_TMSLOW_CLOCK);
-	ssb_wait_bit(dev, SSB_TMSLOW, SSB_TMSLOW_REJECT, 1000, 1);
+	reject = ssb_tmslow_reject_bitmask(dev);
+	ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
+	ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
 	ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
 	ssb_write32(dev, SSB_TMSLOW,
 		    SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
-		    SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET |
+		    reject | SSB_TMSLOW_RESET |
 		    core_specific_flags);
 	/* flush */
 	ssb_read32(dev, SSB_TMSLOW);
 	udelay(1);
 
 	ssb_write32(dev, SSB_TMSLOW,
-		    SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET |
+		    reject | SSB_TMSLOW_RESET |
 		    core_specific_flags);
 	/* flush */
 	ssb_read32(dev, SSB_TMSLOW);
@@ -715,7 +918,7 @@ EXPORT_SYMBOL(ssb_dma_translation);
 
 int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
 {
-	struct device *dev = &ssb_dev->dev;
+	struct device *dev = ssb_dev->dev;
 
 #ifdef CONFIG_SSB_PCIHOST
 	if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI &&
@@ -729,6 +932,50 @@ int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
 }
 EXPORT_SYMBOL(ssb_dma_set_mask);
 
+int ssb_bus_may_powerdown(struct ssb_bus *bus)
+{
+	struct ssb_chipcommon *cc;
+	int err;
+
+	/* On buses where more than one core may be working
+	 * at a time, we must not powerdown stuff if there are
+	 * still cores that may want to run. */
+	if (bus->bustype == SSB_BUSTYPE_SSB)
+		return 0;
+
+	cc = &bus->chipco;
+	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
+	err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
+	if (err)
+		goto error;
+
+	return 0;
+error:
+	ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
+	return err;
+}
+EXPORT_SYMBOL(ssb_bus_may_powerdown);
+
+int ssb_bus_powerup(struct ssb_bus *bus, int dynamic_pctl)
+{
+	struct ssb_chipcommon *cc;
+	int err;
+	enum ssb_clkmode mode;
+
+	err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
+	if (err)
+		goto error;
+	cc = &bus->chipco;
+	mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
+	ssb_chipco_set_clockmode(cc, mode);
+
+	return 0;
+error:
+	ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
+	return err;
+}
+EXPORT_SYMBOL(ssb_bus_powerup);
+
 u32 ssb_admatch_base(u32 adm)
 {
 	u32 base = 0;
@@ -793,6 +1040,8 @@ static int __init ssb_modinit(void)
 	ssb_buses_lock();
 	err = ssb_attach_queued_buses();
 	ssb_buses_unlock();
+	if (err)
+		bus_unregister(&ssb_bustype);
 
 	return err;
 }
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/pci.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/pci.c
index 811af789e..fcd8e871c 100644
--- a/target/linux/brcm47xx-2.6/files/drivers/ssb/pci.c
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/pci.c
@@ -121,7 +121,7 @@ int ssb_pci_xtal(struct ssb_bus *bus, u32 what, int turn_on)
 				err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out);
 				if (err)
 					goto err_pci;
-				msleep(2);
+				msleep(5);
 			}
 		}
 
@@ -240,6 +240,52 @@ static void sprom_do_read(struct ssb_bus *bus, u16 *sprom)
 		sprom[i] = readw(bus->mmio + SSB_SPROM_BASE + (i * 2));
 }
 
+static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
+{
+	struct pci_dev *pdev = bus->host_pci;
+	int i, err;
+	u32 spromctl;
+
+	ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+	err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+	if (err)
+		goto err_ctlreg;
+	spromctl |= SSB_SPROMCTL_WE;
+	err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+	if (err)
+		goto err_ctlreg;
+	ssb_printk(KERN_NOTICE PFX "[ 0%%");
+	msleep(500);
+	for (i = 0; i < SSB_SPROMSIZE_WORDS; i++) {
+		if (i == SSB_SPROMSIZE_WORDS / 4)
+			ssb_printk("25%%");
+		else if (i == SSB_SPROMSIZE_WORDS / 2)
+			ssb_printk("50%%");
+		else if (i == (SSB_SPROMSIZE_WORDS / 4) * 3)
+			ssb_printk("75%%");
+		else if (i % 2)
+			ssb_printk(".");
+		writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
+		mmiowb();
+		msleep(20);
+	}
+	err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+	if (err)
+		goto err_ctlreg;
+	spromctl &= ~SSB_SPROMCTL_WE;
+	err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+	if (err)
+		goto err_ctlreg;
+	msleep(500);
+	ssb_printk("100%% ]\n");
+	ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
+
+	return 0;
+err_ctlreg:
+	ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
+	return err;
+}
+
 static void sprom_extract_r1(struct ssb_sprom_r1 *out, const u16 *in)
 {
 	int i;
@@ -472,9 +518,155 @@ const struct ssb_bus_ops ssb_pci_ops = {
 	.write32	= ssb_pci_write32,
 };
 
+static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len)
+{
+	int i, pos = 0;
+
+	for (i = 0; i < SSB_SPROMSIZE_WORDS; i++) {
+		pos += snprintf(buf + pos, buf_len - pos - 1,
+				"%04X", swab16(sprom[i]) & 0xFFFF);
+	}
+	pos += snprintf(buf + pos, buf_len - pos - 1, "\n");
+
+	return pos + 1;
+}
+
+static int hex2sprom(u16 *sprom, const char *dump, size_t len)
+{
+	char tmp[5] = { 0 };
+	int cnt = 0;
+	unsigned long parsed;
+
+	if (len < SSB_SPROMSIZE_BYTES * 2)
+		return -EINVAL;
+
+	while (cnt < SSB_SPROMSIZE_WORDS) {
+		memcpy(tmp, dump, 4);
+		dump += 4;
+		parsed = simple_strtoul(tmp, NULL, 16);
+		sprom[cnt++] = swab16((u16)parsed);
+	}
+
+	return 0;
+}
+
+static ssize_t ssb_pci_attr_sprom_show(struct device *pcidev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev);
+	struct ssb_bus *bus;
+	u16 *sprom;
+	int err = -ENODEV;
+	ssize_t count = 0;
+
+	bus = ssb_pci_dev_to_bus(pdev);
+	if (!bus)
+		goto out;
+	err = -ENOMEM;
+	sprom = kcalloc(SSB_SPROMSIZE_WORDS, sizeof(u16), GFP_KERNEL);
+	if (!sprom)
+		goto out;
+
+	err = -ERESTARTSYS;
+	if (mutex_lock_interruptible(&bus->pci_sprom_mutex))
+		goto out_kfree;
+	sprom_do_read(bus, sprom);
+	mutex_unlock(&bus->pci_sprom_mutex);
+
+	count = sprom2hex(sprom, buf, PAGE_SIZE);
+	err = 0;
+
+out_kfree:
+	kfree(sprom);
+out:
+	return err ? err : count;
+}
+
+static ssize_t ssb_pci_attr_sprom_store(struct device *pcidev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev);
+	struct ssb_bus *bus;
+	u16 *sprom;
+	int res = 0, err = -ENODEV;
+
+	bus = ssb_pci_dev_to_bus(pdev);
+	if (!bus)
+		goto out;
+	err = -ENOMEM;
+	sprom = kcalloc(SSB_SPROMSIZE_WORDS, sizeof(u16), GFP_KERNEL);
+	if (!sprom)
+		goto out;
+	err = hex2sprom(sprom, buf, count);
+	if (err) {
+		err = -EINVAL;
+		goto out_kfree;
+	}
+	err = sprom_check_crc(sprom);
+	if (err) {
+		err = -EINVAL;
+		goto out_kfree;
+	}
+
+	err = -ERESTARTSYS;
+	if (mutex_lock_interruptible(&bus->pci_sprom_mutex))
+		goto out_kfree;
+	err = ssb_devices_freeze(bus);
+	if (err) {
+		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
+		goto out_unlock;
+	}
+	res = sprom_do_write(bus, sprom);
+	err = ssb_devices_thaw(bus);
+	if (err)
+		ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
+out_unlock:
+	mutex_unlock(&bus->pci_sprom_mutex);
+out_kfree:
+	kfree(sprom);
+out:
+	if (res)
+		return res;
+	return err ? err : count;
+}
+
+static DEVICE_ATTR(ssb_sprom, 0600,
+		   ssb_pci_attr_sprom_show,
+		   ssb_pci_attr_sprom_store);
+
+void ssb_pci_exit(struct ssb_bus *bus)
+{
+	struct pci_dev *pdev;
+
+	if (bus->bustype != SSB_BUSTYPE_PCI)
+		return;
+
+	pdev = bus->host_pci;
+	device_remove_file(&pdev->dev, &dev_attr_ssb_sprom);
+}
+
 int ssb_pci_init(struct ssb_bus *bus)
 {
+	struct pci_dev *pdev;
+	int err;
+
 	if (bus->bustype != SSB_BUSTYPE_PCI)
 		return 0;
-	return ssb_pci_sprom_get(bus);
+
+	pdev = bus->host_pci;
+	mutex_init(&bus->pci_sprom_mutex);
+	err = device_create_file(&pdev->dev, &dev_attr_ssb_sprom);
+	if (err)
+		goto out;
+	err = ssb_pci_sprom_get(bus);
+	if (err)
+		goto err_remove_sprom_file;
+
+out:
+	return err;
+err_remove_sprom_file:
+	device_remove_file(&pdev->dev, &dev_attr_ssb_sprom);
+	return err;
 }
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/pcihost_wrapper.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/pcihost_wrapper.c
new file mode 100644
index 000000000..82a10abef
--- /dev/null
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/pcihost_wrapper.c
@@ -0,0 +1,104 @@
+/*
+ * Sonics Silicon Backplane
+ * PCI Hostdevice wrapper
+ *
+ * Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (c) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
+ * Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+ * Copyright (c) 2005-2007 Michael Buesch <mbuesch@freenet.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/pci.h>
+#include <linux/ssb/ssb.h>
+
+
+#ifdef CONFIG_PM
+static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	pci_save_state(dev);
+	pci_disable_device(dev);
+	pci_set_power_state(dev, pci_choose_state(dev, state));
+
+	return 0;
+}
+
+static int ssb_pcihost_resume(struct pci_dev *dev)
+{
+	int err;
+
+	pci_set_power_state(dev, 0);
+	err = pci_enable_device(dev);
+	if (err)
+		return err;
+	pci_restore_state(dev);
+
+	return 0;
+}
+#else /* CONFIG_PM */
+# define ssb_pcihost_suspend	NULL
+# define ssb_pcihost_resume	NULL
+#endif /* CONFIG_PM */
+
+static int ssb_pcihost_probe(struct pci_dev *dev,
+			     const struct pci_device_id *id)
+{
+	struct ssb_bus *ssb;
+	int err = -ENOMEM;
+	const char *name;
+
+	ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
+	if (!ssb)
+		goto out;
+	err = pci_enable_device(dev);
+	if (err)
+		goto err_kfree_ssb;
+	name = dev->dev.bus_id;
+	if (dev->driver && dev->driver->name)
+		name = dev->driver->name;
+	err = pci_request_regions(dev, name);
+	if (err)
+		goto err_pci_disable;
+	pci_set_master(dev);
+
+	err = ssb_bus_pcibus_register(ssb, dev);
+	if (err)
+		goto err_pci_release_regions;
+
+	pci_set_drvdata(dev, ssb);
+
+out:
+	return err;
+
+err_pci_release_regions:
+	pci_release_regions(dev);
+err_pci_disable:
+	pci_disable_device(dev);
+err_kfree_ssb:
+	kfree(ssb);
+	return err;
+}
+
+static void ssb_pcihost_remove(struct pci_dev *dev)
+{
+	struct ssb_bus *ssb = pci_get_drvdata(dev);
+
+	ssb_bus_unregister(ssb);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	kfree(ssb);
+	pci_set_drvdata(dev, NULL);
+}
+
+int ssb_pcihost_register(struct pci_driver *driver)
+{
+	driver->probe = ssb_pcihost_probe;
+	driver->remove = ssb_pcihost_remove;
+	driver->suspend = ssb_pcihost_suspend;
+	driver->resume = ssb_pcihost_resume;
+
+	return pci_register_driver(driver);
+}
+EXPORT_SYMBOL(ssb_pcihost_register);
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/scan.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/scan.c
index 9e4a121c1..feaf1e57d 100644
--- a/target/linux/brcm47xx-2.6/files/drivers/ssb/scan.c
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/scan.c
@@ -17,6 +17,13 @@
 #include <linux/pci.h>
 #include <asm/io.h>
 
+#ifdef CONFIG_SSB_PCMCIAHOST
+# include <pcmcia/cs_types.h>
+# include <pcmcia/cs.h>
+# include <pcmcia/cistpl.h>
+# include <pcmcia/ds.h>
+#endif
+
 #include "ssb_private.h"
 
 
@@ -222,14 +229,32 @@ static void __iomem * ssb_ioremap(struct ssb_bus *bus,
 	return mmio;
 }
 
+static int we_support_multiple_80211_cores(struct ssb_bus *bus)
+{
+	/* More than one 802.11 core is only supported by special chips.
+	 * There are chips with two 802.11 cores, but with dangling
+	 * pins on the second core. Be careful and reject them here.
+	 */
+
+#ifdef CONFIG_SSB_PCIHOST
+	if (bus->bustype == SSB_BUSTYPE_PCI) {
+		if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
+		    bus->host_pci->device == 0x4324)
+			return 1;
+	}
+#endif /* CONFIG_SSB_PCIHOST */
+	return 0;
+}
+
 int ssb_bus_scan(struct ssb_bus *bus,
 		 unsigned long baseaddr)
 {
 	int err = -ENOMEM;
 	void __iomem *mmio;
 	u32 idhi, cc, rev, tmp;
-	int i;
+	int dev_i, i;
 	struct ssb_device *dev;
+	int nr_80211_cores = 0;
 
 	mmio = ssb_ioremap(bus, baseaddr);
 	if (!mmio)
@@ -293,11 +318,11 @@ int ssb_bus_scan(struct ssb_bus *bus,
 	}
 
 	/* Fetch basic information about each core/device */
-	for (i = 0; i < bus->nr_devices; i++) {
+	for (i = 0, dev_i = 0; i < bus->nr_devices; i++) {
 		err = scan_switchcore(bus, i);
 		if (err)
 			goto err_unmap;
-		dev = &(bus->devices[i]);
+		dev = &(bus->devices[dev_i]);
 
 		idhi = scan_read32(bus, i, SSB_IDHIGH);
 		dev->id.coreid = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT;
@@ -306,8 +331,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
 		dev->id.vendor = (idhi & SSB_IDHIGH_VC) >> SSB_IDHIGH_VC_SHIFT;
 		dev->core_index = i;
 		dev->bus = bus;
-		if ((dev->bus->bustype == SSB_BUSTYPE_PCI) && (bus->host_pci))
-			dev->irq = bus->host_pci->irq;
+		dev->ops = bus->ops;
 
 		ssb_dprintk(KERN_INFO PFX
 			    "Core %d found: %s "
@@ -315,13 +339,19 @@ int ssb_bus_scan(struct ssb_bus *bus,
 			    i, ssb_core_name(dev->id.coreid),
 			    dev->id.coreid, dev->id.revision, dev->id.vendor);
 
-		dev->dev.bus = &ssb_bustype;
-		snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
-			 "ssb%02x:%02x", bus->busnumber, i);
-
 		switch (dev->id.coreid) {
+		case SSB_DEV_80211:
+			nr_80211_cores++;
+			if (nr_80211_cores > 1) {
+				if (!we_support_multiple_80211_cores(bus)) {
+					ssb_dprintk(KERN_INFO PFX "Ignoring additional "
+						    "802.11 core\n");
+					continue;
+				}
+			}
+			break;
 		case SSB_DEV_EXTIF:
-#ifdef CONFIG_BCM947XX
+#ifdef CONFIG_SSB_DRIVER_EXTIF
 			if (bus->extif.dev) {
 				ssb_printk(KERN_WARNING PFX
 					   "WARNING: Multiple EXTIFs found\n");
@@ -340,14 +370,14 @@ int ssb_bus_scan(struct ssb_bus *bus,
 			break;
 		case SSB_DEV_MIPS:
 		case SSB_DEV_MIPS_3302:
-#ifdef CONFIG_BCM947XX
+#ifdef CONFIG_SSB_DRIVER_MIPS
 			if (bus->mipscore.dev) {
 				ssb_printk(KERN_WARNING PFX
 					   "WARNING: Multiple MIPS cores found\n");
 				break;
 			}
 			bus->mipscore.dev = dev;
-#endif /* CONFIG_BCM947XX */
+#endif /* CONFIG_SSB_DRIVER_MIPS */
 			break;
 		case SSB_DEV_PCI:
 		case SSB_DEV_PCIE:
@@ -363,7 +393,11 @@ int ssb_bus_scan(struct ssb_bus *bus,
 		default:
 			break;
 		}
+
+		dev_i++;
 	}
+	bus->nr_devices = dev_i;
+
 	err = 0;
 out:
 	return err;
diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/ssb_private.h b/target/linux/brcm47xx-2.6/files/drivers/ssb/ssb_private.h
index 59645f5a6..ae1fc0633 100644
--- a/target/linux/brcm47xx-2.6/files/drivers/ssb/ssb_private.h
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/ssb_private.h
@@ -53,6 +53,7 @@ extern int ssb_pci_xtal(struct ssb_bus *bus, u32 what,
 			int turn_on);
 extern int ssb_pci_sprom_get(struct ssb_bus *bus);
 extern void ssb_pci_get_boardtype(struct ssb_bus *bus);
+extern void ssb_pci_exit(struct ssb_bus *bus);
 extern int ssb_pci_init(struct ssb_bus *bus);
 extern const struct ssb_bus_ops ssb_pci_ops;
 
@@ -80,6 +81,9 @@ static inline int ssb_pci_sprom_get(struct ssb_bus *bus)
 static inline void ssb_pci_get_boardtype(struct ssb_bus *bus)
 {
 }
+static inline void ssb_pci_exit(struct ssb_bus *bus)
+{
+}
 static inline int ssb_pci_init(struct ssb_bus *bus)
 {
 	return 0;
@@ -128,8 +132,12 @@ extern void ssb_iounmap(struct ssb_bus *ssb);
 
 
 /* core.c */
-extern struct bus_type ssb_bustype;
 extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
+#ifdef CONFIG_SSB_PCIHOST
+extern int ssb_devices_freeze(struct ssb_bus *bus);
+extern int ssb_devices_thaw(struct ssb_bus *bus);
+extern struct ssb_bus * ssb_pci_dev_to_bus(struct pci_dev *pdev);
+#endif /* CONFIG_SSB_PCIHOST */
 
 
 /* Ceiling division helper. Divides x by y. */
diff --git a/target/linux/brcm47xx-2.6/files/drivers/usb/host/ohci-ssb.c b/target/linux/brcm47xx-2.6/files/drivers/usb/host/ohci-ssb.c
new file mode 100644
index 000000000..2b3ef36b1
--- /dev/null
+++ b/target/linux/brcm47xx-2.6/files/drivers/usb/host/ohci-ssb.c
@@ -0,0 +1,254 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom USB-core OHCI driver
+ *
+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+
+
+#define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
+
+struct ssb_ohci_device {
+	struct ohci_hcd ohci; /* _must_ be at the beginning. */
+
+	u32 enable_flags;
+};
+
+
+static inline
+struct ssb_ohci_device * hcd_to_ssb_ohci(struct usb_hcd *hcd)
+{
+	return (struct ssb_ohci_device *)(hcd->hcd_priv);
+}
+
+
+static const struct ssb_device_id ssb_ohci_table[] = {
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+	SSB_DEVTABLE_END
+};
+MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
+
+
+static int ssb_ohci_reset(struct usb_hcd *hcd)
+{
+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+	struct ohci_hcd *ohci = &ohcidev->ohci;
+	int err;
+
+	ohci_hcd_init(ohci);
+	err = ohci_init(ohci);
+
+	return err;
+}
+
+static int ssb_ohci_start(struct usb_hcd *hcd)
+{
+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+	struct ohci_hcd *ohci = &ohcidev->ohci;
+	int err;
+
+	err = ohci_run(ohci);
+	if (err < 0) {
+		ohci_err(ohci, "can't start\n");
+		ohci_stop(hcd);
+	}
+
+	return err;
+}
+
+#ifdef CONFIG_PM
+static int ssb_ohci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
+{
+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+	struct ohci_hcd *ohci = &ohcidev->ohci;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ohci->lock, flags);
+
+	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+	ohci_readl(ohci, &ohci->regs->intrdisable); /* commit write */
+
+	/* make sure snapshot being resumed re-enumerates everything */
+	if (message.event == PM_EVENT_PRETHAW)
+		ohci_usb_reset(ohci);
+
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	spin_unlock_irqrestore(&ohci->lock, flags);
+
+	return 0;
+}
+
+static int ssb_ohci_hcd_resume(struct usb_hcd *hcd)
+{
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	usb_hcd_resume_root_hub(hcd);
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static const struct hc_driver ssb_ohci_hc_driver = {
+	.description		= "ssb-usb-ohci",
+	.product_desc		= "SSB OHCI Controller",
+	.hcd_priv_size		= sizeof(struct ssb_ohci_device),
+
+	.irq			= ohci_irq,
+	.flags			= HCD_MEMORY | HCD_USB11,
+
+	.reset			= ssb_ohci_reset,
+	.start			= ssb_ohci_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+
+#ifdef CONFIG_PM
+	.suspend		= ssb_ohci_hcd_suspend,
+	.resume			= ssb_ohci_hcd_resume,
+#endif
+
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+
+	.get_frame_number	= ohci_get_frame,
+
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+	.hub_irq_enable		= ohci_rhsc_enable,
+
+#ifdef CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+
+static void ssb_ohci_detach(struct ssb_device *dev)
+{
+	struct usb_hcd *hcd = ssb_get_drvdata(dev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	usb_put_hcd(hcd);
+	ssb_device_disable(dev, 0);
+}
+
+static int ssb_ohci_attach(struct ssb_device *dev)
+{
+	struct ssb_ohci_device *ohcidev;
+	struct usb_hcd *hcd;
+	int err = -ENOMEM;
+	u32 tmp, flags = 0;
+
+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
+		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+
+	ssb_device_enable(dev, flags);
+
+	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+			     dev->dev->bus_id);
+	if (!hcd)
+		goto err_dev_disable;
+	ohcidev = hcd_to_ssb_ohci(hcd);
+	ohcidev->enable_flags = flags;
+
+	tmp = ssb_read32(dev, SSB_ADMATCH0);
+	hcd->rsrc_start = ssb_admatch_base(tmp);
+	hcd->rsrc_len = ssb_admatch_size(tmp);
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs)
+		goto err_put_hcd;
+	err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+	if (err)
+		goto err_iounmap;
+
+	ssb_set_drvdata(dev, hcd);
+
+	return err;
+
+err_iounmap:
+	iounmap(hcd->regs);
+err_put_hcd:
+	usb_put_hcd(hcd);
+err_dev_disable:
+	ssb_device_disable(dev, flags);
+	return err;
+}
+
+static int ssb_ohci_probe(struct ssb_device *dev,
+			  const struct ssb_device_id *id)
+{
+	int err;
+	u16 chipid_top;
+
+	chipid_top = (dev->bus->chip_id & 0xFF00);
+	if (chipid_top != 0x4700 &&
+	    chipid_top != 0x5300) {
+		/* USBcores are only connected on embedded devices. */
+		return -ENODEV;
+	}
+	/* TODO: Probably need more checks here whether the core is connected. */
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	/* We currently always attach SSB_DEV_USB11_HOSTDEV
+	 * as HOST OHCI. If we want to attach it as Client device,
+	 * we must branch here and call into the (yet to
+	 * be written) Client mode driver. Same for remove(). */
+
+	err = ssb_ohci_attach(dev);
+
+	return err;
+}
+
+static void ssb_ohci_remove(struct ssb_device *dev)
+{
+	ssb_ohci_detach(dev);
+}
+
+#ifdef CONFIG_PM
+static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
+{
+	ssb_device_disable(dev, 0);
+
+	return 0;
+}
+
+static int ssb_ohci_resume(struct ssb_device *dev)
+{
+	struct usb_hcd *hcd = ssb_get_drvdata(dev);
+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+
+	ssb_device_enable(dev, ohcidev->enable_flags);
+
+	return 0;
+}
+#else /* CONFIG_PM */
+# define ssb_ohci_suspend	NULL
+# define ssb_ohci_resume	NULL
+#endif /* CONFIG_PM */
+
+static struct ssb_driver ssb_ohci_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= ssb_ohci_table,
+	.probe		= ssb_ohci_probe,
+	.remove		= ssb_ohci_remove,
+	.suspend	= ssb_ohci_suspend,
+	.resume		= ssb_ohci_resume,
+};
diff --git a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb.h b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb.h
index 7fdeae71c..1ed3cbc1e 100644
--- a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb.h
+++ b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb.h
@@ -6,6 +6,9 @@
 #include <linux/list.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
+#ifdef CONFIG_SSB_PCIHOST
+# include <linux/pci.h>
+#endif
 
 #include <linux/ssb/ssb_regs.h>
 
@@ -98,6 +101,17 @@ struct ssb_sprom {
 };
 
 
+struct ssb_device;
+/* Lowlevel read/write operations on the device MMIO.
+ * Internal, don't use that outside of ssb. */
+struct ssb_bus_ops {
+	u16 (*read16)(struct ssb_device *dev, u16 offset);
+	u32 (*read32)(struct ssb_device *dev, u16 offset);
+	void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
+	void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
+};
+
+
 /* Core-ID values. */
 #define SSB_DEV_CHIPCOMMON	0x800
 #define SSB_DEV_ILINE20		0x801
@@ -149,18 +163,37 @@ struct ssb_device_id {
 #define SSB_ANY_ID		0xFFFF
 #define SSB_ANY_REV		0xFF
 
+/* Some kernel subsystems poke with dev->drvdata, so we must use the
+ * following ugly workaround to get from struct device to struct ssb_device */
+struct __ssb_dev_wrapper {
+	struct device dev;
+	struct ssb_device *sdev;
+};
 
 struct ssb_device {
-	struct device dev;
+	/* Having a copy of the ops pointer in each dev struct
+	 * is an optimization. */
+	const struct ssb_bus_ops *ops;
+
+	struct device *dev;
 	struct ssb_bus *bus;
 	struct ssb_device_id id;
 
 	u8 core_index;
 	unsigned int irq;
+
+	/* Internal-only stuff follows. */
 	void *drvdata;		/* Per-device data */
 	void *devtypedata;	/* Per-devicetype (eg 802.11) data */
 };
-#define dev_to_ssb_dev(_dev) container_of(_dev, struct ssb_device, dev)
+
+/* Go from struct device to struct ssb_device. */
+static inline
+struct ssb_device * dev_to_ssb_dev(struct device *dev)
+{
+	struct __ssb_dev_wrapper *wrap = container_of(dev, struct __ssb_dev_wrapper, dev);
+	return wrap->sdev;
+}
 
 /* Device specific user data */
 static inline
@@ -182,13 +215,6 @@ void * ssb_get_devtypedata(struct ssb_device *dev)
 	return dev->devtypedata;
 }
 
-struct ssb_bus_ops {
-	u16 (*read16)(struct ssb_device *dev, u16 offset);
-	u32 (*read32)(struct ssb_device *dev, u16 offset);
-	void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
-	void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
-};
-
 
 struct ssb_driver {
 	const char *name;
@@ -218,7 +244,6 @@ enum ssb_bustype {
 	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
 	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
 	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
-	//TODO SSB_BUSTYPE_JTAG,
 };
 
 /* board_vendor */
@@ -238,12 +263,6 @@ enum ssb_bustype {
 #define SSB_CHIPPACK_BCM4712M	2	/* Medium 225pin 4712 */
 #define SSB_CHIPPACK_BCM4712L	0	/* Large 340pin 4712 */
 
-static inline u16 ssb_read16(struct ssb_device *dev, u16 offset);
-static inline u32 ssb_read32(struct ssb_device *dev, u16 offset);
-static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value);
-static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value);
-static inline u32 ssb_write32_masked(struct ssb_device *dev, u16 offset, u32 mask, u32 value);
-
 #include <linux/ssb/ssb_driver_chipcommon.h>
 #include <linux/ssb/ssb_driver_mips.h>
 #include <linux/ssb/ssb_driver_extif.h>
@@ -269,6 +288,10 @@ struct ssb_bus {
 	/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
 	struct pcmcia_device *host_pcmcia;
 
+#ifdef CONFIG_SSB_PCIHOST
+	struct mutex pci_sprom_mutex;
+#endif
+
 	/* ID information about the PCB. */
 	u16 board_vendor;
 	u16 board_type;
@@ -328,32 +351,22 @@ void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags);
 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags);
 
 
+/* Device MMIO register read/write functions. */
 static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
 {
-	return dev->bus->ops->read16(dev, offset);
+	return dev->ops->read16(dev, offset);
 }
 static inline u32 ssb_read32(struct ssb_device *dev, u16 offset)
 {
-	return dev->bus->ops->read32(dev, offset);
+	return dev->ops->read32(dev, offset);
 }
 static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
 {
-	dev->bus->ops->write16(dev, offset, value);
+	dev->ops->write16(dev, offset, value);
 }
 static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
 {
-	dev->bus->ops->write32(dev, offset, value);
-}
-
-static inline u32 ssb_write32_masked(struct ssb_device *dev,
-				  u16 offset,
-				  u32 mask,
-				  u32 value)
-{
-	value &= mask;
-	value |= ssb_read32(dev, offset) & ~mask;
-	ssb_write32(dev, offset, value);
-	return value;
+	dev->ops->write32(dev, offset, value);
 }
 
 
@@ -366,6 +379,21 @@ extern u32 ssb_dma_translation(struct ssb_device *dev);
 extern int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask);
 
 
+#ifdef CONFIG_SSB_PCIHOST
+/* PCI-host wrapper driver */
+extern int ssb_pcihost_register(struct pci_driver *driver);
+static inline void ssb_pcihost_unregister(struct pci_driver *driver)
+{
+	pci_unregister_driver(driver);
+}
+#endif /* CONFIG_SSB_PCIHOST */
+
+
+/* Bus-Power handling functions. */
+extern int ssb_bus_may_powerdown(struct ssb_bus *bus);
+extern int ssb_bus_powerup(struct ssb_bus *bus, int dynamic_pctl);
+
+
 /* Various helper functions */
 extern u32 ssb_admatch_base(u32 adm);
 extern u32 ssb_admatch_size(u32 adm);
diff --git a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_chipcommon.h b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_chipcommon.h
index e0c0e61b8..885659023 100644
--- a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_chipcommon.h
@@ -124,8 +124,8 @@
 #define SSB_CHIPCO_GPIOOUT		0x0064
 #define SSB_CHIPCO_GPIOOUTEN		0x0068
 #define SSB_CHIPCO_GPIOCTL		0x006C
-#define SSB_CHIPCO_GPIOINTPOL		0x0070
-#define SSB_CHIPCO_GPIOINTMASK		0x0074
+#define SSB_CHIPCO_GPIOPOL		0x0070
+#define SSB_CHIPCO_GPIOIRQ		0x0074
 #define SSB_CHIPCO_WATCHDOG		0x0080
 #define SSB_CHIPCO_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
 #define  SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT	16
@@ -364,8 +364,6 @@ extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
 extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state);
 extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
 
-extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, u32 chip_id,
-	u32 *rate, u32 *plltype, u32 *n, u32 *m);
 extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
 					u32 *plltype, u32 *n, u32 *m);
 extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
@@ -380,47 +378,6 @@ enum ssb_clkmode {
 extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
 				     enum ssb_clkmode mode);
 
-
-/* GPIO functions */
-static inline u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc,
-				     u32 mask)
-{
-	return ssb_read32(cc->dev, SSB_CHIPCO_GPIOIN) & mask;
-}
-
-static inline u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc,
-				     u32 mask, u32 value)
-{
-	return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOOUT, mask, value);
-}
-
-static inline u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc,
-				     u32 mask, u32 value)
-{
-	return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOOUTEN, mask, value);
-}
-
-static inline u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc,
-				     u32 mask, u32 value)
-{
-	return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOCTL, mask, value);
-}
-
-static inline u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc,
-				     u32 mask, u32 value)
-{
-	return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOINTMASK, mask, value);
-}
-
-static inline u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc,
-				     u32 mask, u32 value)
-{
-	return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOINTPOL, mask, value);
-}
-/* TODO: GPIO reservation */
-
-extern int ssb_chipco_watchdog(struct ssb_chipcommon *cc, uint ticks);
-
 #ifdef CONFIG_SSB_SERIAL
 extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
 				  struct ssb_serial_port *ports);
diff --git a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_extif.h b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_extif.h
index 63add5662..278a637e8 100644
--- a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_extif.h
+++ b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_extif.h
@@ -159,37 +159,5 @@ struct ssb_extif {
 #define SSB_EXTIF_WATCHDOG_CLK		48000000	/* Hz */
 
 
-/* GPIO functions */
-static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif,
-				     u32 mask)
-{
-	return ssb_read32(extif->dev, SSB_EXTIF_GPIO_IN) & mask;
-}
-
-static inline u32 ssb_extif_gpio_out(struct ssb_extif *extif,
-				     u32 mask, u32 value)
-{
-	return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_OUT(0), mask, value);
-}
-
-static inline u32 ssb_extif_gpio_outen(struct ssb_extif *extif,
-				     u32 mask, u32 value)
-{
-	return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_OUTEN(0), mask, value);
-}
-
-static inline u32 ssb_extif_gpio_polarity(struct ssb_extif *extif,
-				     u32 mask, u32 value)
-{
-	return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_INTPOL, mask, value);
-}
-
-static inline u32 ssb_extif_gpio_intmask(struct ssb_extif *extif,
-				     u32 mask, u32 value)
-{
-	return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_INTMASK, mask, value);
-}
-
-
 #endif /* __KERNEL__ */
 #endif /* LINUX_SSB_EXTIFCORE_H_ */
diff --git a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_mips.h b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_mips.h
index 61c766550..91f2373be 100644
--- a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_mips.h
+++ b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_driver_mips.h
@@ -3,7 +3,7 @@
 
 #ifdef __KERNEL__
 
-#ifdef CONFIG_BCM947XX
+#ifdef CONFIG_SSB_DRIVER_MIPS
 
 struct ssb_device;
 
@@ -22,17 +22,16 @@ struct ssb_mipscore {
 	int nr_serial_ports;
 	struct ssb_serial_port serial_ports[4];
 
-	int flash_buswidth;
 	u32 flash_window;
 	u32 flash_window_size;
 };
 
 extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
-extern u32 ssb_cpu_clock(struct ssb_mipscore *mcore);
+
 extern unsigned int ssb_mips_irq(struct ssb_device *dev);
 
 
-#else /* CONFIG_BCM947XX */
+#else /* CONFIG_SSB_DRIVER_MIPS */
 
 struct ssb_mipscore {
 };
@@ -42,7 +41,7 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
 {
 }
 
-#endif /* CONFIG_BCM947XX */
+#endif /* CONFIG_SSB_DRIVER_MIPS */
 
 #endif /* __KERNEL__ */
 #endif /* LINUX_SSB_MIPSCORE_H_ */
diff --git a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_regs.h b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_regs.h
index 6bb40464d..e1c7ff78a 100644
--- a/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_regs.h
+++ b/target/linux/brcm47xx-2.6/files/include/linux/ssb/ssb_regs.h
@@ -96,7 +96,8 @@
 #define  SSB_INTVEC_ENET1	0x00000040 /* Enable interrupts for enet 1 */
 #define SSB_TMSLOW		0x0F98     /* SB Target State Low */
 #define  SSB_TMSLOW_RESET	0x00000001 /* Reset */
-#define  SSB_TMSLOW_REJECT	0x00000002 /* Reject */
+#define  SSB_TMSLOW_REJECT_22	0x00000002 /* Reject (Backplane rev 2.2) */
+#define  SSB_TMSLOW_REJECT_23	0x00000004 /* Reject (Backplane rev 2.3) */
 #define  SSB_TMSLOW_CLOCK	0x00010000 /* Clock Enable */
 #define  SSB_TMSLOW_FGC		0x00020000 /* Force Gated Clocks On */
 #define  SSB_TMSLOW_PE		0x40000000 /* Power Management Enable */
diff --git a/target/linux/brcm47xx-2.6/patches/200-b44_ssb_fixup.patch b/target/linux/brcm47xx-2.6/patches/200-b44_ssb_fixup.patch
new file mode 100644
index 000000000..816d7e18b
--- /dev/null
+++ b/target/linux/brcm47xx-2.6/patches/200-b44_ssb_fixup.patch
@@ -0,0 +1,256 @@
+Index: linux-2.6.22-rc4/drivers/net/b44.c
+===================================================================
+--- linux-2.6.22-rc4.orig/drivers/net/b44.c	2007-06-10 21:33:15.000000000 +0100
++++ linux-2.6.22-rc4/drivers/net/b44.c	2007-06-10 21:33:23.000000000 +0100
+@@ -128,7 +128,7 @@
+ 	                                       unsigned long offset,
+ 	                                       enum dma_data_direction dir)
+ {
+-	dma_sync_single_range_for_device(&sdev->dev, dma_base,
++	dma_sync_single_range_for_device(sdev->dev, dma_base,
+ 		                        offset & dma_desc_align_mask,
+ 		                        dma_desc_sync_size, dir);
+ }
+@@ -138,7 +138,7 @@
+ 	                                    unsigned long offset,
+ 	                                    enum dma_data_direction dir)
+ {
+-	dma_sync_single_range_for_cpu(&sdev->dev, dma_base,
++	dma_sync_single_range_for_cpu(sdev->dev, dma_base,
+ 		                     offset & dma_desc_align_mask,
+ 		                     dma_desc_sync_size, dir);
+ }
+@@ -563,7 +563,7 @@
+ 
+ 		BUG_ON(skb == NULL);
+ 
+-		dma_unmap_single(&bp->sdev->dev,
++		dma_unmap_single(bp->sdev->dev,
+ 				 pci_unmap_addr(rp, mapping),
+ 				 skb->len,
+ 				 DMA_TO_DEVICE);
+@@ -603,7 +603,7 @@
+ 	if (skb == NULL)
+ 		return -ENOMEM;
+ 	
+-	mapping = dma_map_single(&bp->sdev->dev, skb->data,
++	mapping = dma_map_single(bp->sdev->dev, skb->data,
+ 				 RX_PKT_BUF_SZ,
+ 				 DMA_FROM_DEVICE);
+ 
+@@ -613,18 +613,18 @@
+ 		mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
+ 		/* Sigh... */
+ 		if (!dma_mapping_error(mapping))
+-			dma_unmap_single(&bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
++			dma_unmap_single(bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
+ 		dev_kfree_skb_any(skb);
+ 		skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
+ 		if (skb == NULL)
+ 			return -ENOMEM;
+-		mapping = dma_map_single(&bp->sdev->dev, skb->data,
++		mapping = dma_map_single(bp->sdev->dev, skb->data,
+ 					 RX_PKT_BUF_SZ,
+ 					 DMA_FROM_DEVICE);
+ 		if (dma_mapping_error(mapping) ||
+ 			mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
+ 			if (!dma_mapping_error(mapping))
+-				dma_unmap_single(&bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
++				dma_unmap_single(bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
+ 			dev_kfree_skb_any(skb);
+ 			return -ENOMEM;
+ 		}
+@@ -702,7 +702,7 @@
+ 			                    dest_idx * sizeof(dest_desc),
+ 			                    DMA_BIDIRECTIONAL);
+ 
+-	dma_sync_single_for_device(&bp->sdev->dev, le32_to_cpu(src_desc->addr),
++	dma_sync_single_for_device(bp->sdev->dev, le32_to_cpu(src_desc->addr),
+ 				       RX_PKT_BUF_SZ,
+ 				       DMA_FROM_DEVICE);
+ }
+@@ -724,7 +724,7 @@
+ 		struct rx_header *rh;
+ 		u16 len;
+ 
+-		dma_sync_single_for_cpu(&bp->sdev->dev, map,
++		dma_sync_single_for_cpu(bp->sdev->dev, map,
+ 					    RX_PKT_BUF_SZ,
+ 					    DMA_FROM_DEVICE);
+ 		rh = (struct rx_header *) skb->data;
+@@ -758,7 +758,7 @@
+ 			skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
+ 			if (skb_size < 0)
+ 				goto drop_it;
+-			dma_unmap_single(&bp->sdev->dev, map,
++			dma_unmap_single(bp->sdev->dev, map,
+ 					 skb_size, DMA_FROM_DEVICE);
+ 			/* Leave out rx_header */
+ 	       	skb_put(skb, len+bp->rx_offset);
+@@ -931,22 +931,22 @@
+ 		goto err_out;
+ 	}
+ 
+-	mapping = dma_map_single(&bp->sdev->dev, skb->data, len, DMA_TO_DEVICE);
++	mapping = dma_map_single(bp->sdev->dev, skb->data, len, DMA_TO_DEVICE);
+ 	if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) {
+ 		/* Chip can't handle DMA to/from >1GB, use bounce buffer */
+ 		if (!dma_mapping_error(mapping))
+-			dma_unmap_single(&bp->sdev->dev, mapping, len, DMA_TO_DEVICE);
++			dma_unmap_single(bp->sdev->dev, mapping, len, DMA_TO_DEVICE);
+ 
+ 		bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
+ 					     GFP_ATOMIC|GFP_DMA);
+ 		if (!bounce_skb)
+ 			goto err_out;
+ 
+-		mapping = dma_map_single(&bp->sdev->dev, bounce_skb->data,
++		mapping = dma_map_single(bp->sdev->dev, bounce_skb->data,
+ 					 len, DMA_TO_DEVICE);
+ 		if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) {
+ 			if (!dma_mapping_error(mapping))
+-				dma_unmap_single(&bp->sdev->dev, mapping,
++				dma_unmap_single(bp->sdev->dev, mapping,
+ 					 len, DMA_TO_DEVICE);
+ 			dev_kfree_skb_any(bounce_skb);
+ 			goto err_out;
+@@ -1046,7 +1046,7 @@
+ 
+ 		if (rp->skb == NULL)
+ 			continue;
+-		dma_unmap_single(&bp->sdev->dev,
++		dma_unmap_single(bp->sdev->dev,
+ 				 pci_unmap_addr(rp, mapping),
+ 				 RX_PKT_BUF_SZ,
+ 				 DMA_FROM_DEVICE);
+@@ -1060,7 +1060,7 @@
+ 
+ 		if (rp->skb == NULL)
+ 			continue;
+-		dma_unmap_single(&bp->sdev->dev,
++		dma_unmap_single(bp->sdev->dev,
+ 				 pci_unmap_addr(rp, mapping),
+ 				 rp->skb->len,
+ 				 DMA_TO_DEVICE);
+@@ -1085,12 +1085,12 @@
+ 	memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
+ 
+ 	if (bp->flags & B44_FLAG_RX_RING_HACK)
+-		dma_sync_single_for_device(&bp->sdev->dev, bp->rx_ring_dma,
++		dma_sync_single_for_device(bp->sdev->dev, bp->rx_ring_dma,
+ 			                  DMA_TABLE_BYTES,
+ 			                  DMA_BIDIRECTIONAL);
+ 
+ 	if (bp->flags & B44_FLAG_TX_RING_HACK)
+-		dma_sync_single_for_device(&bp->sdev->dev, bp->tx_ring_dma,
++		dma_sync_single_for_device(bp->sdev->dev, bp->tx_ring_dma,
+ 			                  DMA_TABLE_BYTES,
+ 			                  DMA_TO_DEVICE);
+ 
+@@ -1112,24 +1112,24 @@
+ 	bp->tx_buffers = NULL;
+ 	if (bp->rx_ring) {
+ 		if (bp->flags & B44_FLAG_RX_RING_HACK) {
+-			dma_unmap_single(&bp->sdev->dev, bp->rx_ring_dma,
++			dma_unmap_single(bp->sdev->dev, bp->rx_ring_dma,
+ 					DMA_TABLE_BYTES,
+ 					DMA_BIDIRECTIONAL);
+ 			kfree(bp->rx_ring);
+ 		} else
+-			dma_free_coherent(&bp->sdev->dev, DMA_TABLE_BYTES,
++			dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES,
+ 					    bp->rx_ring, bp->rx_ring_dma);
+ 		bp->rx_ring = NULL;
+ 		bp->flags &= ~B44_FLAG_RX_RING_HACK;
+ 	}
+ 	if (bp->tx_ring) {
+ 		if (bp->flags & B44_FLAG_TX_RING_HACK) {
+-			dma_unmap_single(&bp->sdev->dev, bp->tx_ring_dma,
++			dma_unmap_single(bp->sdev->dev, bp->tx_ring_dma,
+ 					DMA_TABLE_BYTES,
+ 					DMA_TO_DEVICE);
+ 			kfree(bp->tx_ring);
+ 		} else
+-			dma_free_coherent(&bp->sdev->dev, DMA_TABLE_BYTES,
++			dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES,
+ 					    bp->tx_ring, bp->tx_ring_dma);
+ 		bp->tx_ring = NULL;
+ 		bp->flags &= ~B44_FLAG_TX_RING_HACK;
+@@ -1155,7 +1155,7 @@
+ 		goto out_err;
+ 
+ 	size = DMA_TABLE_BYTES;
+-	bp->rx_ring = dma_alloc_coherent(&bp->sdev->dev, size, &bp->rx_ring_dma, GFP_ATOMIC);
++	bp->rx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->rx_ring_dma, GFP_ATOMIC);
+ 	if (!bp->rx_ring) {
+ 		/* Allocation may have failed due to pci_alloc_consistent
+ 		   insisting on use of GFP_DMA, which is more restrictive
+@@ -1167,7 +1167,7 @@
+ 		if (!rx_ring)
+ 			goto out_err;
+ 
+-		rx_ring_dma = dma_map_single(&bp->sdev->dev, rx_ring,
++		rx_ring_dma = dma_map_single(bp->sdev->dev, rx_ring,
+ 			                    DMA_TABLE_BYTES,
+ 			                    DMA_BIDIRECTIONAL);
+ 
+@@ -1182,7 +1182,7 @@
+ 		bp->flags |= B44_FLAG_RX_RING_HACK;
+ 	}
+ 
+-	bp->tx_ring = dma_alloc_coherent(&bp->sdev->dev, size, &bp->tx_ring_dma, GFP_ATOMIC);
++	bp->tx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->tx_ring_dma, GFP_ATOMIC);
+ 	if (!bp->tx_ring) {
+ 		/* Allocation may have failed due to dma_alloc_coherent
+ 		   insisting on use of GFP_DMA, which is more restrictive
+@@ -1194,7 +1194,7 @@
+ 		if (!tx_ring)
+ 			goto out_err;
+ 
+-		tx_ring_dma = dma_map_single(&bp->sdev->dev, tx_ring,
++		tx_ring_dma = dma_map_single(bp->sdev->dev, tx_ring,
+ 			                    DMA_TABLE_BYTES,
+ 			                    DMA_TO_DEVICE);
+ 
+@@ -2314,13 +2314,13 @@
+ 
+ 	dev = alloc_etherdev(sizeof(*bp));
+ 	if (!dev) {
+-		dev_err(&sdev->dev, "Etherdev alloc failed, aborting.\n");
++		dev_err(sdev->dev, "Etherdev alloc failed, aborting.\n");
+ 		err = -ENOMEM;
+ 		goto out;
+ 	}
+ 
+ 	SET_MODULE_OWNER(dev);
+-	SET_NETDEV_DEV(dev,&sdev->dev);
++	SET_NETDEV_DEV(dev,sdev->dev);
+ 
+ 	/* No interesting netdevice features in this card... */
+ 	dev->features |= 0;
+@@ -2358,7 +2358,7 @@
+ 
+ 	err = b44_get_invariants(bp);
+ 	if (err) {
+-		dev_err(&sdev->dev,
++		dev_err(sdev->dev,
+ 			"Problem fetching invariants of chip, aborting.\n");
+ 		goto err_out_free_dev;
+ 	}
+@@ -2379,7 +2379,7 @@
+ 
+ 	err = register_netdev(dev);
+ 	if (err) {
+-		dev_err(&sdev->dev, "Cannot register net device, aborting.\n");
++		dev_err(sdev->dev, "Cannot register net device, aborting.\n");
+ 		goto out;
+ 	}
+ 
+@@ -2458,7 +2458,6 @@
+ 	rc = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
+ 	if (rc) {
+ 		printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
+-		pci_disable_device(pdev);
+ 		return rc;
+ 	}
+ 
diff --git a/target/linux/brcm47xx-2.6/patches/205-ssb_integrate.patch b/target/linux/brcm47xx-2.6/patches/205-ssb_integrate.patch
new file mode 100644
index 000000000..67882454d
--- /dev/null
+++ b/target/linux/brcm47xx-2.6/patches/205-ssb_integrate.patch
@@ -0,0 +1,78 @@
+Index: linux-2.6.22-rc4/drivers/usb/host/Kconfig
+===================================================================
+--- linux-2.6.22-rc4.orig/drivers/usb/host/Kconfig	2007-06-10 21:32:11.000000000 +0100
++++ linux-2.6.22-rc4/drivers/usb/host/Kconfig	2007-06-10 21:33:24.000000000 +0100
+@@ -142,6 +142,19 @@
+ 	  Enables support for PCI-bus plug-in USB controller cards.
+ 	  If unsure, say Y.
+ 
++config USB_OHCI_HCD_SSB
++	bool "OHCI support for the Broadcom SSB OHCI core (embedded systems only)"
++	depends on USB_OHCI_HCD && ((USB_OHCI_HCD=m && SSB) || (USB_OHCI_HCD=y && SSB=y)) && EXPERIMENTAL
++	default n
++	---help---
++	  Support for the Sonics Silicon Backplane (SSB) attached
++	  Broadcom USB OHCI core.
++
++	  This device is only present in some embedded devices with
++	  Broadcom based SSB bus.
++
++	  If unsure, say N.
++
+ config USB_OHCI_BIG_ENDIAN_DESC
+ 	bool
+ 	depends on USB_OHCI_HCD
+Index: linux-2.6.22-rc4/drivers/usb/host/ohci-hcd.c
+===================================================================
+--- linux-2.6.22-rc4.orig/drivers/usb/host/ohci-hcd.c	2007-06-10 21:32:11.000000000 +0100
++++ linux-2.6.22-rc4/drivers/usb/host/ohci-hcd.c	2007-06-10 21:33:24.000000000 +0100
+@@ -920,11 +920,17 @@
+ #define PS3_SYSTEM_BUS_DRIVER	ps3_ohci_sb_driver
+ #endif
+ 
++#ifdef CONFIG_USB_OHCI_HCD_SSB
++#include "ohci-ssb.c"
++#define SSB_OHCI_DRIVER		ssb_ohci_driver
++#endif
++
+ #if	!defined(PCI_DRIVER) &&		\
+ 	!defined(PLATFORM_DRIVER) &&	\
+ 	!defined(OF_PLATFORM_DRIVER) &&	\
+ 	!defined(SA1111_DRIVER) &&	\
+-	!defined(PS3_SYSTEM_BUS_DRIVER)
++	!defined(PS3_SYSTEM_BUS_DRIVER) && \
++	!defined(SSB_OHCI_DRIVER)
+ #error "missing bus glue for ohci-hcd"
+ #endif
+ 
+@@ -972,10 +978,20 @@
+ 		goto error_pci;
+ #endif
+ 
++#ifdef SSB_OHCI_DRIVER
++	retval = ssb_driver_register(&SSB_OHCI_DRIVER);
++	if (retval)
++		goto error_ssb;
++#endif
++
+ 	return retval;
+ 
+ 	/* Error path */
++#ifdef SSB_OHCI_DRIVER
++ error_ssb:
++#endif
+ #ifdef PCI_DRIVER
++	pci_unregister_driver(&PCI_DRIVER);
+  error_pci:
+ #endif
+ #ifdef SA1111_DRIVER
+@@ -1001,6 +1017,9 @@
+ 
+ static void __exit ohci_hcd_mod_exit(void)
+ {
++#ifdef SSB_OHCI_DRIVER
++	ssb_driver_unregister(&SSB_OHCI_DRIVER);
++#endif
+ #ifdef PCI_DRIVER
+ 	pci_unregister_driver(&PCI_DRIVER);
+ #endif
diff --git a/target/linux/brcm47xx-2.6/patches/210-ssb_merge.patch b/target/linux/brcm47xx-2.6/patches/210-ssb_merge.patch
new file mode 100644
index 000000000..21986b342
--- /dev/null
+++ b/target/linux/brcm47xx-2.6/patches/210-ssb_merge.patch
@@ -0,0 +1,421 @@
+Index: linux-2.6.22-rc4/drivers/ssb/driver_chipcommon.c
+===================================================================
+--- linux-2.6.22-rc4.orig/drivers/ssb/driver_chipcommon.c	2007-06-10 21:32:11.000000000 +0100
++++ linux-2.6.22-rc4/drivers/ssb/driver_chipcommon.c	2007-06-10 21:33:25.000000000 +0100
+@@ -264,6 +264,31 @@
+ 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+ }
+ 
++/* TODO: These two functions are a clear candidate for merging, but one gets
++ * the processor clock, and the other gets the bus clock.
++ */
++void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
++                             u32 *plltype, u32 *n, u32 *m)
++{
++	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
++	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
++	switch (*plltype) {
++		case SSB_PLLTYPE_2:
++		case SSB_PLLTYPE_4:
++		case SSB_PLLTYPE_6:
++		case SSB_PLLTYPE_7:
++			*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
++			break;
++		case SSB_PLLTYPE_3:
++			/* 5350 uses m2 to control mips */
++			*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
++			break;
++		default:
++			*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
++			break;
++	}
++}
++
+ void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+ 				 u32 *plltype, u32 *n, u32 *m)
+ {
+@@ -400,3 +425,13 @@
+ 	return nr_ports;
+ }
+ #endif /* CONFIG_SSB_SERIAL */
++
++/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
++int
++ssb_chipco_watchdog(struct ssb_chipcommon *cc, uint ticks)
++{
++	/* instant NMI */
++	chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
++	return 0;
++}
++EXPORT_SYMBOL(ssb_chipco_watchdog);
+Index: linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c
+===================================================================
+--- linux-2.6.22-rc4.orig/drivers/ssb/driver_mipscore.c	2007-06-10 21:32:11.000000000 +0100
++++ linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c	2007-06-10 21:33:25.000000000 +0100
+@@ -4,6 +4,7 @@
+  *
+  * Copyright 2005, Broadcom Corporation
+  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+@@ -31,6 +32,16 @@
+ 	ssb_write32(mcore->dev, offset, value);
+ }
+ 
++static inline u32 extif_read32(struct ssb_extif *extif, u16 offset)
++{
++	return ssb_read32(extif->dev, offset);
++}
++
++static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value)
++{
++	ssb_write32(extif->dev, offset, value);
++}
++
+ static const u32 ipsflag_irq_mask[] = {
+ 	0,
+ 	SSB_IPSFLAG_IRQ1,
+@@ -118,9 +129,9 @@
+ }
+ 
+ /* XXX: leave here or move into separate extif driver? */
+-static int ssb_extif_serial_init(struct ssb_device *dev, struct ssb_serial_ports *ports)
++static int ssb_extif_serial_init(struct ssb_extif *dev, struct ssb_serial_port *ports)
+ {
+-
++	return 0;
+ }
+ 
+ 
+@@ -174,23 +185,76 @@
+ {
+ 	struct ssb_bus *bus = mcore->dev->bus;
+ 
++	mcore->flash_buswidth = 2;
+ 	if (bus->chipco.dev) {
+ 		mcore->flash_window = 0x1c000000;
+-		mcore->flash_window_size = 0x800000;
++		mcore->flash_window_size = 0x02000000;
++		if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
++		               & SSB_CHIPCO_CFG_DS16) == 0)
++			mcore->flash_buswidth = 1;
+ 	} else {
+ 		mcore->flash_window = 0x1fc00000;
+-		mcore->flash_window_size = 0x400000;
++		mcore->flash_window_size = 0x00400000;
+ 	}
+ }
+ 
++static void ssb_extif_timing_init(struct ssb_extif *extif, u32 ns)
++{
++	u32 tmp;
++
++	/* Initialize extif so we can get to the LEDs and external UART */
++	extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN);
++
++	/* Set timing for the flash */
++	tmp  = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT;
++	tmp |= ceildiv(40, ns) << SSB_PROG_WCNT_1_SHIFT;
++	tmp |= ceildiv(120, ns);
++	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
++
++	/* Set programmable interface timing for external uart */
++	tmp  = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT;
++	tmp |= ceildiv(20, ns) << SSB_PROG_WCNT_2_SHIFT;
++	tmp |= ceildiv(100, ns) << SSB_PROG_WCNT_1_SHIFT;
++	tmp |= ceildiv(120, ns);
++	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
++}
+ 
+-static void ssb_cpu_clock(struct ssb_mipscore *mcore)
++static inline void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
++                                              u32 *pll_type, u32 *n, u32 *m)
+ {
++	*pll_type = SSB_PLLTYPE_1;
++	*n = extif_read32(extif, SSB_EXTIF_CLOCK_N);
++	*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
+ }
+ 
+-void ssb_mipscore_init(struct ssb_mipscore *mcore)
++u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
+ {
+ 	struct ssb_bus *bus = mcore->dev->bus;
++	u32 pll_type, n, m, rate = 0;
++
++	if (bus->extif.dev) {
++		ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
++	} else if (bus->chipco.dev) {
++		ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
++	} else
++		return 0;
++
++	if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
++		rate = 200000000;
++	} else {
++		rate = ssb_calc_clock_rate(pll_type, n, m);
++	}
++
++	if (pll_type == SSB_PLLTYPE_6) {
++		rate *= 2;
++	}
++
++	return rate;
++}
++
++void ssb_mipscore_init(struct ssb_mipscore *mcore)
++{
++	struct ssb_bus *bus;
+ 	struct ssb_device *dev;
+ 	unsigned long hz, ns;
+ 	unsigned int irq, i;
+@@ -198,6 +262,8 @@
+ 	if (!mcore->dev)
+ 		return; /* We don't have a MIPS core */
+ 
++	bus = mcore->dev->bus;
++
+ 	ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
+ 
+ 	hz = ssb_clockspeed(bus);
+@@ -205,28 +271,9 @@
+ 		hz = 100000000;
+ 	ns = 1000000000 / hz;
+ 
+-//TODO
+-#if 0
+-	if (have EXTIF) {
+-		/* Initialize extif so we can get to the LEDs and external UART */
+-		W_REG(&eir->prog_config, CF_EN);
+-
+-		/* Set timing for the flash */
+-		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
+-		tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
+-		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
+-		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
+-
+-		/* Set programmable interface timing for external uart */
+-		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
+-		tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
+-		tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
+-		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
+-		W_REG(&eir->prog_waitcount, tmp);
+-	}
+-	else... chipcommon
+-#endif
+-	if (bus->chipco.dev)
++	if (bus->extif.dev)
++		ssb_extif_timing_init(&bus->extif, ns);
++	else if (bus->chipco.dev)
+ 		ssb_chipco_timing_init(&bus->chipco, ns);
+ 
+ 	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
+@@ -256,3 +303,5 @@
+ 	ssb_mips_serial_init(mcore);
+ 	ssb_mips_flash_detect(mcore);
+ }
++
++EXPORT_SYMBOL(ssb_mips_irq);
+Index: linux-2.6.22-rc4/drivers/ssb/driver_pcicore.c
+===================================================================
+--- linux-2.6.22-rc4.orig/drivers/ssb/driver_pcicore.c	2007-06-10 21:32:11.000000000 +0100
++++ linux-2.6.22-rc4/drivers/ssb/driver_pcicore.c	2007-06-10 21:33:25.000000000 +0100
+@@ -93,6 +93,9 @@
+ 
+ 	/* Enable PCI bridge BAR1 prefetch and burst */
+ 	pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
++
++	/* Make sure our latency is high enough to handle the devices behind us */
++	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
+ 
+@@ -110,7 +113,7 @@
+ 
+ 	if (unlikely(pc->cardbusmode && dev > 1))
+ 		goto out;
+-	if (bus == 0) {
++	if (bus == 0) {//FIXME busnumber ok?
+ 		/* Type 0 transaction */
+ 		if (unlikely(dev >= SSB_PCI_SLOT_MAX))
+ 			goto out;
+@@ -224,7 +227,7 @@
+ 		val = *((const u32 *)buf);
+ 		break;
+ 	}
+-	writel(*((const u32 *)buf), mmio);
++	writel(val, mmio);
+ 
+ 	err = 0;
+ unmap:
+@@ -307,6 +310,8 @@
+ 	udelay(150);
+ 	val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */
+ 	pcicore_write32(pc, SSB_PCICORE_CTL, val);
++	val = SSB_PCICORE_ARBCTL_INTERN;
++	pcicore_write32(pc, SSB_PCICORE_ARBCTL, val); 
+ 	udelay(1);
+ 
+ 	//TODO cardbus mode
+@@ -336,6 +341,7 @@
+ 	 * The following needs change, if we want to port hostmode
+ 	 * to non-MIPS platform. */
+ 	set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000));
++	mdelay(300);
+ 	register_pci_controller(&ssb_pcicore_controller);
+ }
+ 
+Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_chipcommon.h
+===================================================================
+--- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_chipcommon.h	2007-06-10 21:32:11.000000000 +0100
++++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_chipcommon.h	2007-06-10 21:33:25.000000000 +0100
+@@ -364,6 +364,8 @@
+ extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state);
+ extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
+ 
++extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
++                                    u32 *plltype, u32 *n, u32 *m);
+ extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+ 					u32 *plltype, u32 *n, u32 *m);
+ extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
+@@ -378,6 +380,46 @@
+ extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
+ 				     enum ssb_clkmode mode);
+ 
++/* GPIO functions */
++static inline u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc,
++                                     u32 mask)
++{
++	return ssb_read32(cc->dev, SSB_CHIPCO_GPIOIN) & mask;
++}
++
++static inline u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc,
++                                      u32 mask, u32 value)
++{
++	return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOOUT, mask, value);
++}
++
++static inline u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc,
++                                        u32 mask, u32 value)
++{
++	return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOOUTEN, mask, value);
++}
++
++static inline u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc,
++                                          u32 mask, u32 value)
++{
++	return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOCTL, mask, value);
++}
++
++static inline u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc,
++                                          u32 mask, u32 value)
++{
++	return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOIRQ, mask, value);
++}
++
++static inline u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc,
++                                           u32 mask, u32 value)
++{
++	return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOPOL, mask, value);
++}
++/* TODO: GPIO reservation */
++
++extern int ssb_chipco_watchdog(struct ssb_chipcommon *cc, uint ticks);
++
+ #ifdef CONFIG_SSB_SERIAL
+ extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+ 				  struct ssb_serial_port *ports);
+Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_extif.h
+===================================================================
+--- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_extif.h	2007-06-10 21:32:11.000000000 +0100
++++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_extif.h	2007-06-10 21:33:25.000000000 +0100
+@@ -158,6 +158,36 @@
+ /* watchdog */
+ #define SSB_EXTIF_WATCHDOG_CLK		48000000	/* Hz */
+ 
++/* GPIO functions */
++static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif,
++                                    u32 mask)
++{
++	return ssb_read32(extif->dev, SSB_EXTIF_GPIO_IN) & mask;
++}
++
++static inline u32 ssb_extif_gpio_out(struct ssb_extif *extif,
++                                     u32 mask, u32 value)
++{
++	return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_OUT(0), mask, value);
++}
++
++static inline u32 ssb_extif_gpio_outen(struct ssb_extif *extif,
++                                       u32 mask, u32 value)
++{
++	return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_OUTEN(0), mask, value);
++}
++
++static inline u32 ssb_extif_gpio_polarity(struct ssb_extif *extif,
++                                          u32 mask, u32 value)
++{
++	return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_INTPOL, mask, value);
++}
++
++static inline u32 ssb_extif_gpio_intmask(struct ssb_extif *extif,
++                                         u32 mask, u32 value)
++{
++	return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_INTMASK, mask, value);
++}
+ 
+ #endif /* __KERNEL__ */
+ #endif /* LINUX_SSB_EXTIFCORE_H_ */
+Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_mips.h
+===================================================================
+--- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_mips.h	2007-06-10 21:32:11.000000000 +0100
++++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_mips.h	2007-06-10 21:33:25.000000000 +0100
+@@ -22,11 +22,13 @@
+ 	int nr_serial_ports;
+ 	struct ssb_serial_port serial_ports[4];
+ 
++	int flash_buswidth;
+ 	u32 flash_window;
+ 	u32 flash_window_size;
+ };
+ 
+ extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
++extern u32 ssb_cpu_clock(struct ssb_mipscore *mcore);
+ 
+ extern unsigned int ssb_mips_irq(struct ssb_device *dev);
+ 
+Index: linux-2.6.22-rc4/include/linux/ssb/ssb.h
+===================================================================
+--- linux-2.6.22-rc4.orig/include/linux/ssb/ssb.h	2007-06-10 21:32:11.000000000 +0100
++++ linux-2.6.22-rc4/include/linux/ssb/ssb.h	2007-06-10 21:33:25.000000000 +0100
+@@ -263,6 +263,12 @@
+ #define SSB_CHIPPACK_BCM4712M	2	/* Medium 225pin 4712 */
+ #define SSB_CHIPPACK_BCM4712L	0	/* Large 340pin 4712 */
+ 
++static inline u16 ssb_read16(struct ssb_device *dev, u16 offset);
++static inline u32 ssb_read32(struct ssb_device *dev, u16 offset);
++static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value);
++static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value);
++static inline u32 ssb_write32_masked(struct ssb_device *dev, u16 offset, u32 mask, u32 value);
++
+ #include <linux/ssb/ssb_driver_chipcommon.h>
+ #include <linux/ssb/ssb_driver_mips.h>
+ #include <linux/ssb/ssb_driver_extif.h>
+@@ -369,6 +375,16 @@
+ 	dev->ops->write32(dev, offset, value);
+ }
+ 
++static inline u32 ssb_write32_masked(struct ssb_device *dev,
++                                     u16 offset,
++                                     u32 mask,
++                                     u32 value)
++{
++	value &= mask;
++	value |= ssb_read32(dev, offset) & ~mask;
++	ssb_write32(dev, offset, value);
++	return value;
++}
+ 
+ /* Translation (routing) bits that need to be ORed to DMA
+  * addresses before they are given to a device. */
author	noz <noz@3c298f89-4303-0410-b956-a3cf2f4a3e73>	2007-06-21 20:10:50 +0000
committer	noz <noz@3c298f89-4303-0410-b956-a3cf2f4a3e73>	2007-06-21 20:10:50 +0000
commit	6546ee2d5f04d335314782ca0577901b7c2d83b0 (patch)
tree	b8c2124cfa4e97458937733d65bfac60ff625457 /target/linux
parent	ebd093f2fa1855b10efdc70772e1024dd37b1a4a (diff)