bcm63xx: Add support for the T-Home Speedport W 303V

Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 120 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/base-files/etc/defconfig/96358-502V/network b/target/linux/brcm63xx/base-files/etc/defconfig/96358-502V/network
new file mode 100644
index 000000000..a35fd2ef9
--- /dev/null
+++ b/target/linux/brcm63xx/base-files/etc/defconfig/96358-502V/network
@@ -0,0 +1,14 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option type 	bridge
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index b18386e0d..2c62928a5 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -49,6 +49,11 @@ brcm63xx_detect() {
 		brcm63xx_has_reset_button="true"
 		ifname=eth0
 		;;
+	"bcm63xx/96358-502V "*)
+		status_led="spw303v:green:power+adsl"
+		brcm63xx_has_reset_button="true"
+		ifname=eth0
+		;;
 	"bcm63xx/CPVA642 "* )
 		status_led="power:green"
 		brcm63xx_has_reset_button="true"
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index 144f5559e..bf292de7e 100644
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -87,6 +87,21 @@ define Image/Build/RedBoot
 	dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
 endef
 
+define Image/Build/SPW303V
+	# Generate the tagged image
+	$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+		--output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
+		--boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
+		--load-addr $(LOADADDR) --rsa-signature "$(5)" \
+		$(6) $(7) $(8) $(9)
+	# Fix up header
+	$(STAGING_DIR_HOST)/bin/spw303v -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
+		-o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin
+	$(STAGING_DIR_HOST)/bin/xorimage -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin \
+		-o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-factory.bin
+	rm -f $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp
+endef
+
 define Image/Build/CFEOLD
 	$(TOPDIR)/scripts/brcmImage.pl -t -p	\
 		-b $(2) -c $(3)			\
@@ -209,6 +224,9 @@ define Image/Build
 
 	#HW553
 	$(call Image/Build/CFEHW553,$(1),HW553,6358,0x20000,HW553)
+
+	# T-Com Speedport W 303V Typ B
+	$(call Image/Build/SPW303V,$(1),96358-502V,6358,SPW303V)
 endef
 
 $(eval $(call BuildImage))
diff --git a/target/linux/brcm63xx/patches-2.6.37/453-board_spw303v.patch b/target/linux/brcm63xx/patches-2.6.37/453-board_spw303v.patch
new file mode 100644
index 000000000..8e97fcf00
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.37/453-board_spw303v.patch
@@ -0,0 +1,83 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1728,6 +1728,72 @@ static struct board_info __initdata boar
+ 	.spis = nb4_spi_devices,
+ 	.num_spis = ARRAY_SIZE(nb4_spi_devices),
+ };
++
++ /* T-Home Speedport W 303V Typ B */
++static struct board_info __initdata board_spw303v = {
++	.name			= "96358-502V",
++	.expected_cpu_id	= 0x6358,
++
++	.has_uart0		= 1,
++	.has_enet0		= 1,
++	.has_pci		= 1,
++
++	.enet0 = {
++		.has_phy 		= 1,
++		.use_internal_phy 	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "spw303v:green:power+adsl",
++			.gpio		= 22,
++			.active_low 	= 1,
++		},
++		{
++			.name		= "spw303v:red:power+adsl",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "spw303v:green:ppp",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "spw303v:green:ses",
++			.gpio		= 0,
++			.active_low	= 1,
++		},
++		{
++			.name		= "spw303v:green:voip",
++			.gpio		= 27,
++			.active_low	= 1,
++		},
++		{
++			.name		= "spw303v:green:pots",
++			.gpio		= 31,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 11,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.threshold	= 3,
++		},
++		{
++			.desc		= "ses",
++			.gpio		= 37,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.threshold	= 3,
++		},
++	}
++};
+ #endif
+ 
+ static struct board_info __initdata board_HW553 = {
+@@ -1845,6 +1911,7 @@ static const struct board_info __initdat
+ 	&board_nb4_fxc_r1,
+ 	&board_nb4_fxc_r2,
+ 	&board_HW553,
++	&board_spw303v,
+ #endif
+ };
+