diff options
author | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2009-02-13 08:56:13 +0000 |
---|---|---|
committer | juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2009-02-13 08:56:13 +0000 |
commit | 3da5343a666dfe6cbd126099ae75182b35197398 (patch) | |
tree | 5403ed00cfea7e9fc7e71233a33ec23b4e2ef0ef /target/linux | |
parent | 0a23e243d64c76935cd41122c858a7cead37396d (diff) |
[ar71xx] remove 2.6.26 specific stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14493 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux')
19 files changed, 0 insertions, 767 deletions
diff --git a/target/linux/ar71xx/config-2.6.26 b/target/linux/ar71xx/config-2.6.26 deleted file mode 100644 index eb6b40b3f..000000000 --- a/target/linux/ar71xx/config-2.6.26 +++ /dev/null @@ -1,266 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_8139TOO is not set -CONFIG_ADM6996_PHY=y -CONFIG_AG71XX=y -# CONFIG_AR71XX_EARLY_SERIAL is not set -CONFIG_AR71XX_MACH_AP83=y -CONFIG_AR71XX_MACH_AW_NR580=y -CONFIG_AR71XX_MACH_GENERIC=y -CONFIG_AR71XX_MACH_MZK_W04NU=y -CONFIG_AR71XX_MACH_MZK_W300NH=y -CONFIG_AR71XX_MACH_PB42=y -CONFIG_AR71XX_MACH_RB_4XX=y -CONFIG_AR71XX_MACH_TEW_632BRP=y -CONFIG_AR71XX_MACH_UBNT=y -CONFIG_AR71XX_MACH_WNR2000=y -CONFIG_AR71XX_MACH_WP543=y -CONFIG_AR71XX_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ATHEROS_AR71XX=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BITREVERSE=y -# CONFIG_BROADCOM_PHY is not set -CONFIG_CEVT_R4K=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 init=/etc/preinit" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR2=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CSRC_R4K=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_E1000E_ENABLED is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_FIXED_PHY is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_GPIO_SYSFS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_HAVE_GPIO_LIB=y -CONFIG_HAVE_IDE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=m -# CONFIG_I2C is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -CONFIG_ICPLUS_PHY=y -# CONFIG_IDE is not set -CONFIG_INITRAMFS_ROOT_GID=0 -CONFIG_INITRAMFS_ROOT_UID=0 -CONFIG_INITRAMFS_SOURCE="../../root" -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IRQ_CPU=y -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_LEDS_ALIX is not set -CONFIG_LEDS_GPIO=y -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_M25PXX_USE_FAST_READ is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_MICREL_PHY=y -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_ALAUDA is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_CONCAT=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_M25P80=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -CONFIG_MTD_NAND_RB4XX=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -CONFIG_MYLOADER=y -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NO_IOPORT is not set -CONFIG_PAGEFLAGS_EXTENDED=y -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -CONFIG_PCI=y -# CONFIG_PCIPCWATCHDOG is not set -CONFIG_PCI_DOMAINS=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -CONFIG_PROM_EMU=y -# CONFIG_QSEMI_PHY is not set -# CONFIG_R6040 is not set -# CONFIG_REALTEK_PHY is not set -CONFIG_RFKILL_LEDS=y -CONFIG_RTC_LIB=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPI=y -CONFIG_SPI_AR71XX=y -CONFIG_SPI_BITBANG=y -# CONFIG_SPI_GPIO is not set -CONFIG_SPI_MASTER=y -# CONFIG_SPI_SPIDEV is not set -CONFIG_SSB_POSSIBLE=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TC35815 is not set -CONFIG_TICK_ONESHOT=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -CONFIG_USB=m -CONFIG_USB_EHCI_AR71XX=y -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_OHCI_AR71XX=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -CONFIG_VIDEO_MEDIA=m -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L2_COMMON=m -CONFIG_YAFFS_9BYTE_TAGS=y -CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y -CONFIG_YAFFS_AUTO_YAFFS2=y -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0 -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -CONFIG_YAFFS_FS=y -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_YAFFS_YAFFS1=y -CONFIG_YAFFS_YAFFS2=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar71xx/patches-2.6.26/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.26/001-ar71xx_core.patch deleted file mode 100644 index 0ead6d29b..000000000 --- a/target/linux/ar71xx/patches-2.6.26/001-ar71xx_core.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -597,6 +597,13 @@ core-$(CONFIG_TOSHIBA_RBTX4938) += arch/ - cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx - load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000 - -+# -+# Atheros AR71xx -+# -+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/ -+cflags-$(CONFIG_ATHEROS_AR71XX) += -Iinclude/asm-mips/mach-ar71xx -+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000 -+ - # temporary until string.h is fixed - cflags-y += -ffreestanding - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -21,6 +21,24 @@ choice - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -+config ATHEROS_AR71XX -+ bool "Atheros AR71xx based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select GENERIC_GPIO -+ select HAVE_GPIO_LIB -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select MIPS_MACHINE -+ help -+ Support for Atheros AR71xx based boards. -+ - config BASLER_EXCITE - bool "Basler eXcite smart camera" - select CEVT_R4K -@@ -687,6 +705,7 @@ config WR_PPMC - - endchoice - -+source "arch/mips/ar71xx/Kconfig" - source "arch/mips/au1000/Kconfig" - source "arch/mips/basler/excite/Kconfig" - source "arch/mips/jazz/Kconfig" diff --git a/target/linux/ar71xx/patches-2.6.26/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.26/002-ar71xx_pci.patch deleted file mode 100644 index 85e22f8c7..000000000 --- a/target/linux/ar71xx/patches-2.6.26/002-ar71xx_pci.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -15,6 +15,7 @@ obj-$(CONFIG_MIPS_TX3927) += ops-tx3927. - obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o - obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o - obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o -+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o - - # - # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/ar71xx/patches-2.6.26/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.26/003-ar71xx_usb_host.patch deleted file mode 100644 index c5dd3d29f..000000000 --- a/target/linux/ar71xx/patches-2.6.26/003-ar71xx_usb_host.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -81,6 +81,12 @@ config USB_EHCI_BIG_ENDIAN_DESC - depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX) - default y - -+config USB_EHCI_AR71XX -+ bool "USB EHCI support for AR71xx" -+ depends on USB_EHCI_HCD && ATHEROS_AR71XX -+ help -+ Support for Atheros AR71xx built-in EHCI controller -+ - config USB_EHCI_FSL - bool "Support for Freescale on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC -@@ -152,6 +158,12 @@ config USB_OHCI_HCD - To compile this driver as a module, choose M here: the - module will be called ohci-hcd. - -+config USB_OHCI_AR71XX -+ bool "USB OHCI support for Atheros AR71xx" -+ depends on USB_OHCI_HCD && ATHEROS_AR71XX -+ help -+ Support for Atheros AR71xx built-in OHCI controller -+ - config USB_OHCI_HCD_PPC_SOC - bool "OHCI support for on-chip PPC USB controller" - depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1034,6 +1034,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ixp4xx_ehci_driver - #endif - -+#ifdef CONFIG_USB_EHCI_AR71XX -+#include "ehci-ar71xx.c" -+#define PLATFORM_DRIVER ehci_ar71xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) - #error "missing bus glue for ehci-hcd" ---- a/drivers/usb/host/ohci.h -+++ b/drivers/usb/host/ohci.h -@@ -538,6 +538,11 @@ static inline struct usb_hcd *ohci_to_hc - #define writel_be(val, addr) out_be32((__force unsigned *)addr, val) - #endif - -+#if defined(CONFIG_ATHEROS_AR71XX) -+#define readl_be(addr) __raw_readl(addr) -+#define writel_be(val, addr) __raw_writel(addr, val) -+#endif -+ - static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci, - __hc32 __iomem * regs) - { ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1057,6 +1057,11 @@ MODULE_LICENSE ("GPL"); - #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver - #endif - -+#ifdef CONFIG_USB_OHCI_AR71XX -+#include "ohci-ar71xx.c" -+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OF_PLATFORM_DRIVER) && \ diff --git a/target/linux/ar71xx/patches-2.6.26/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.26/004-ar71xx_spi_controller.patch deleted file mode 100644 index e0bd2c7aa..000000000 --- a/target/linux/ar71xx/patches-2.6.26/004-ar71xx_spi_controller.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -52,6 +52,13 @@ config SPI_MASTER - comment "SPI Master Controller Drivers" - depends on SPI_MASTER - -+config SPI_AR71XX -+ tristate "Atheros AR71xx SPI Controller" -+ depends on SPI_MASTER && ATHEROS_AR71XX -+ select SPI_BITBANG -+ help -+ This is the SPI contoller driver for Atheros AR71xx. -+ - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) && SPI_MASTER ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -11,6 +11,7 @@ endif - obj-$(CONFIG_SPI_MASTER) += spi.o - - # SPI master controller drivers (bus) -+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o - obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o - obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o - obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o diff --git a/target/linux/ar71xx/patches-2.6.26/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.26/005-ar71xx_mac_driver.patch deleted file mode 100644 index e638157a0..000000000 --- a/target/linux/ar71xx/patches-2.6.26/005-ar71xx_mac_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -2060,6 +2060,8 @@ config ACENIC_OMIT_TIGON_I - - The safe and default value for this is N. - -+source drivers/net/ag71xx/Kconfig -+ - config DL2K - tristate "DL2000/TC902x-based Gigabit Ethernet support" - depends on PCI ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -2,6 +2,7 @@ - # Makefile for the Linux network (ethercard) device drivers. - # - -+obj-$(CONFIG_AG71XX) += ag71xx/ - obj-$(CONFIG_E1000) += e1000/ - obj-$(CONFIG_E1000E) += e1000e/ - obj-$(CONFIG_IBM_EMAC) += ibm_emac/ diff --git a/target/linux/ar71xx/patches-2.6.26/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.26/006-ar71xx_wdt_driver.patch deleted file mode 100644 index fde70f35f..000000000 --- a/target/linux/ar71xx/patches-2.6.26/006-ar71xx_wdt_driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -683,6 +683,13 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config AR71XX_WDT -+ tristate "Atheros AR71xx Watchdog Timer" -+ depends on ATHEROS_AR71XX -+ help -+ Hardware driver for the built-in watchdog timer on the Atheros -+ AR71xx SoCs. -+ - # PARISC Architecture - - # POWERPC Architecture ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o - - # PARISC Architecture - diff --git a/target/linux/ar71xx/patches-2.6.26/100-mtd_m25p80_add_pm25lv_flash_support.patch b/target/linux/ar71xx/patches-2.6.26/100-mtd_m25p80_add_pm25lv_flash_support.patch deleted file mode 100644 index c20bd940f..000000000 --- a/target/linux/ar71xx/patches-2.6.26/100-mtd_m25p80_add_pm25lv_flash_support.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -455,6 +455,10 @@ static struct flash_info __devinitdata m - { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, }, - { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, }, - -+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ -+ { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, -+ { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, -+ - /* Spansion -- single (large) sector size only, at least - * for the chips listed here (without boot sectors). - */ diff --git a/target/linux/ar71xx/patches-2.6.26/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.26/101-ksz8041_phy_driver.patch deleted file mode 100644 index 7b9c2ec47..000000000 --- a/target/linux/ar71xx/patches-2.6.26/101-ksz8041_phy_driver.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -82,6 +82,11 @@ config MVSWITCH_PHY - ---help--- - Currently supports the Marvell 88E6060 switch. - -+config MICREL_PHY -+ tristate "Drivers for Micrel/Kendin PHYs" -+ ---help--- -+ Currently has a driver for the KSZ8041 -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -16,5 +16,6 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o - obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o -+obj-$(CONFIG_MICREL_PHY) += micrel.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/ar71xx/patches-2.6.26/102-mtd_m25p80_add_myloader_parser.patch b/target/linux/ar71xx/patches-2.6.26/102-mtd_m25p80_add_myloader_parser.patch deleted file mode 100644 index 4485d0860..000000000 --- a/target/linux/ar71xx/patches-2.6.26/102-mtd_m25p80_add_myloader_parser.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -645,12 +645,17 @@ static int __devinit m25p_probe(struct s - struct mtd_partition *parts = NULL; - int nr_parts = 0; - -+ static const char *part_probes[] = { - #ifdef CONFIG_MTD_CMDLINE_PARTS -- static const char *part_probes[] = { "cmdlinepart", NULL, }; -+ "cmdlinepart", -+#endif -+#ifdef CONFIG_MTD_MYLOADER_PARTS -+ "MyLoader", -+#endif -+ NULL, }; - - nr_parts = parse_mtd_partitions(&flash->mtd, - part_probes, &parts, 0); --#endif - - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; diff --git a/target/linux/ar71xx/patches-2.6.26/103-mtd_m25p80_add_en25p32_support.patch b/target/linux/ar71xx/patches-2.6.26/103-mtd_m25p80_add_en25p32_support.patch deleted file mode 100644 index cf0e70ec5..000000000 --- a/target/linux/ar71xx/patches-2.6.26/103-mtd_m25p80_add_en25p32_support.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -455,6 +455,9 @@ static struct flash_info __devinitdata m - { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, }, - { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, }, - -+ /* EON -- en25px */ -+ { "en25p32", 0x1c2016, 64 * 1024, 64, }, -+ - /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ - { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, - { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, diff --git a/target/linux/ar71xx/patches-2.6.26/104-mtd_m25p80_add_redboot_parser.patch b/target/linux/ar71xx/patches-2.6.26/104-mtd_m25p80_add_redboot_parser.patch deleted file mode 100644 index 3cfacc206..000000000 --- a/target/linux/ar71xx/patches-2.6.26/104-mtd_m25p80_add_redboot_parser.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -655,6 +655,9 @@ static int __devinit m25p_probe(struct s - #ifdef CONFIG_MTD_MYLOADER_PARTS - "MyLoader", - #endif -+#ifdef CONFIG_MTD_REDBOOT_PARTS -+ "RedBoot", -+#endif - NULL, }; - - nr_parts = parse_mtd_partitions(&flash->mtd, diff --git a/target/linux/ar71xx/patches-2.6.26/105-mtd_m25p80_add_mx25lxxx_support.patch b/target/linux/ar71xx/patches-2.6.26/105-mtd_m25p80_add_mx25lxxx_support.patch deleted file mode 100644 index 203303937..000000000 --- a/target/linux/ar71xx/patches-2.6.26/105-mtd_m25p80_add_mx25lxxx_support.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -458,6 +458,11 @@ static struct flash_info __devinitdata m - /* EON -- en25px */ - { "en25p32", 0x1c2016, 64 * 1024, 64, }, - -+ /* Macronix -- mx25lxxx */ -+ { "mx25l32", 0xc22016, 64 * 1024, 64, }, -+ { "mx25l64", 0xc22017, 64 * 1024, 128, }, -+ { "mx25l128", 0xc22018, 64 * 1024, 256, }, -+ - /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ - { "pm25lv512", 0, 32 * 1024, 2, SECT_4K }, - { "pm25lv010", 0, 32 * 1024, 4, SECT_4K }, diff --git a/target/linux/ar71xx/patches-2.6.26/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.26/140-redboot_partition_scan.patch deleted file mode 100644 index c46a56a50..000000000 --- a/target/linux/ar71xx/patches-2.6.26/140-redboot_partition_scan.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -62,31 +62,32 @@ static int parse_redboot_partitions(stru - static char nullstring[] = "unallocated"; - #endif - -+ buf = vmalloc(master->erasesize); -+ if (!buf) -+ return -ENOMEM; -+ -+ restart: - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; -- while (master->block_isbad && -+ while (master->block_isbad && - master->block_isbad(master, offset)) { - if (!offset) { - nogood: - printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); -+ vfree(buf); - return -EIO; - } - offset -= master->erasesize; - } - } else { - offset = directory * master->erasesize; -- while (master->block_isbad && -+ while (master->block_isbad && - master->block_isbad(master, offset)) { - offset += master->erasesize; - if (offset == master->size) - goto nogood; - } - } -- buf = vmalloc(master->erasesize); -- -- if (!buf) -- return -ENOMEM; -- - printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", - master->name, offset); - -@@ -158,6 +159,11 @@ static int parse_redboot_partitions(stru - } - if (i == numslots) { - /* Didn't find it */ -+ if (offset + master->erasesize < master->size) { -+ /* not at the end of the flash yet, maybe next block :) */ -+ directory++; -+ goto restart; -+ } - printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", - master->name); - ret = 0; diff --git a/target/linux/ar71xx/patches-2.6.26/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.26/200-rb4xx_nand_driver.patch deleted file mode 100644 index a0d55d666..000000000 --- a/target/linux/ar71xx/patches-2.6.26/200-rb4xx_nand_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -386,4 +386,8 @@ config MTD_NAND_FSL_UPM - Enables support for NAND Flash chips wired onto Freescale PowerPC - processor localbus with User-Programmable Machine support. - -+config MTD_NAND_RB4XX -+ tristate "NAND flash driver for RouterBoard 4xx series" -+ depends on MTD_NAND && ATHEROS_AR71XX -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27 - obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o - obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o -+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-2.6.26/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.26/300-mips_fw_myloader.patch deleted file mode 100644 index 21266f89a..000000000 --- a/target/linux/ar71xx/patches-2.6.26/300-mips_fw_myloader.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -158,6 +158,7 @@ endif - # - libs-$(CONFIG_ARC) += arch/mips/fw/arc/ - libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ -+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ - libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ - libs-y += arch/mips/fw/lib/ - libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -874,6 +874,9 @@ config MIPS_NILE4 - config MIPS_DISABLE_OBSOLETE_IDE - bool - -+config MYLOADER -+ bool -+ - config SYNC_R4K - bool - diff --git a/target/linux/ar71xx/patches-2.6.26/301-enable_prom_emulator.patch b/target/linux/ar71xx/patches-2.6.26/301-enable_prom_emulator.patch deleted file mode 100644 index 5ed804666..000000000 --- a/target/linux/ar71xx/patches-2.6.26/301-enable_prom_emulator.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -36,6 +36,7 @@ config ATHEROS_AR71XX - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_HAS_EARLY_PRINTK - select MIPS_MACHINE -+ select PROM_EMU - help - Support for Atheros AR71xx based boards. - diff --git a/target/linux/ar71xx/patches-2.6.26/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.26/901-get_c0_compare_irq_function.patch deleted file mode 100644 index 3eaeb8bd3..000000000 --- a/target/linux/ar71xx/patches-2.6.26/901-get_c0_compare_irq_function.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -43,6 +43,7 @@ - #include <asm/mmu_context.h> - #include <asm/types.h> - #include <asm/stacktrace.h> -+#include <asm/time.h> - - extern asmlinkage void handle_int(void); - extern asmlinkage void handle_tlbm(void); -@@ -1464,6 +1465,8 @@ void __cpuinit per_cpu_trap_init(void) - */ - if (cpu_has_mips_r2) { - cp0_compare_irq = (read_c0_intctl() >> 29) & 7; -+ if (get_c0_compare_irq) -+ cp0_compare_irq = get_c0_compare_irq(); - cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; ---- a/include/asm-mips/time.h -+++ b/include/asm-mips/time.h -@@ -53,6 +53,7 @@ extern int (*perf_irq)(void); - #ifdef CONFIG_CEVT_R4K - extern int mips_clockevent_init(void); - extern unsigned int __weak get_c0_compare_int(void); -+extern unsigned int __weak get_c0_compare_irq(void); - #else - static inline int mips_clockevent_init(void) - { diff --git a/target/linux/ar71xx/patches-2.6.26/902-mips_clocksource_init_war.patch b/target/linux/ar71xx/patches-2.6.26/902-mips_clocksource_init_war.patch deleted file mode 100644 index 61d9610cf..000000000 --- a/target/linux/ar71xx/patches-2.6.26/902-mips_clocksource_init_war.patch +++ /dev/null @@ -1,65 +0,0 @@ ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -13,6 +13,22 @@ - #include <asm/smtc_ipi.h> - #include <asm/time.h> - -+/* -+ * Compare interrupt can be routed and latched outside the core, -+ * so a single execution hazard barrier may not be enough to give -+ * it time to clear as seen in the Cause register. 4 time the -+ * pipeline depth seems reasonably conservative, and empirically -+ * works better in configurations with high CPU/bus clock ratios. -+ */ -+ -+#define compare_change_hazard() \ -+ do { \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ } while (0) -+ - static int mips_next_event(unsigned long delta, - struct clock_event_device *evt) - { -@@ -28,6 +44,7 @@ static int mips_next_event(unsigned long - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -+ compare_change_hazard(); - res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; - #ifdef CONFIG_MIPS_MT_SMTC - evpe(vpflags); -@@ -187,7 +204,7 @@ static int c0_compare_int_usable(void) - */ - if (c0_compare_int_pending()) { - write_c0_compare(read_c0_count()); -- irq_disable_hazard(); -+ compare_change_hazard(); - if (c0_compare_int_pending()) - return 0; - } -@@ -196,7 +213,7 @@ static int c0_compare_int_usable(void) - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -- irq_disable_hazard(); -+ compare_change_hazard(); - if ((int)(read_c0_count() - cnt) < 0) - break; - /* increase delta if the timer was already expired */ -@@ -205,11 +222,12 @@ static int c0_compare_int_usable(void) - while ((int)(read_c0_count() - cnt) <= 0) - ; /* Wait for expiry */ - -+ compare_change_hazard(); - if (!c0_compare_int_pending()) - return 0; - - write_c0_compare(read_c0_count()); -- irq_disable_hazard(); -+ compare_change_hazard(); - if (c0_compare_int_pending()) - return 0; - |