ramips: add support for Argus ATP-52B

[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27991 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 140 insertions, 0 deletions

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 405e7c42e..1ffa79056 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -41,6 +41,7 @@ case "$FIRMWARE" in
 		rt2x00_eeprom_extract "devconf" 0 272
 		;;
 
+	argus-atp52b | \
 	f5d8235v2 | \
 	fonera20n | \
 	hw550-3g | \
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 33ce13cb5..616e96697 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -10,6 +10,9 @@ ramips_board_name() {
 	machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
 
 	case "$machine" in
+	*"Argus ATP-52B")
+		name="argus-atp52b"
+		;;
 	*"Aztech HW550-3G")
 		name="hw550-3g"
 		;;
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 8571f7a28..baaff71fa 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -25,6 +25,7 @@ enum ramips_mach_type {
 	RAMIPS_MACH_NW718,		/* Netcore NW718 */
 
 	/* RT3052 based machines */
+	RAMIPS_MACH_ARGUS_ATP52B,	/* Argus ATP-52B */
 	RAMIPS_MACH_F5D8235_V2,         /* Belkin F5D8235 v2 */
 	RAMIPS_MACH_PWH2004,		/* Prolink 2004H / Abocom 5205 */
 	RAMIPS_MACH_WCR150GN,		/* Sparklan WCR-150GN */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index c24670e03..36b1515b3 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -2,6 +2,12 @@ if RALINK_RT305X
 
 menu "Ralink RT350x machine selection"
 
+config RT305X_MACH_ARGUS_ATP52B
+	bool "Argus ATP-52B support"
+	default y
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_RT_G32_REVB
 	bool "Asus RT-G32 revB board support"
 	default y
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 2b1c59ea2..75f4782c2 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -11,6 +11,7 @@ obj-y	:= irq.o setup.o devices.o rt305x.o clock.o
 
 obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
 
+obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B)	+= mach-argus-atp52b.o
 obj-$(CONFIG_RT305X_MACH_DIR_300_REVB)	+= mach-dir-300-revb.o
 obj-$(CONFIG_RT305X_MACH_F5D8235_V2)    += mach-f5d8235-v2.o
 obj-$(CONFIG_RT305X_MACH_FONERA20N)	+= mach-fonera20n.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c
new file mode 100644
index 000000000..bee06fd5f
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c
@@ -0,0 +1,114 @@
+/*
+ *  Argus ATP-52B router support
+ *  http://www.argus-co.com/english/productsview.php?id=70&cid=81
+ *
+ *  Copyright (C) 2011 Roman Yeryomin <roman@advem.lv>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define ARGUS_ATP52B_GPIO_LED_RUN		9
+#define ARGUS_ATP52B_GPIO_LED_NET		13
+#define ARGUS_ATP52B_GPIO_BUTTON_WPS		0
+#define ARGUS_ATP52B_GPIO_BUTTON_RESET		10
+#define ARGUS_ATP52B_BUTTONS_POLL_INTERVAL	20
+
+static struct gpio_led argus_atp52b_leds_gpio[] __initdata = {
+	{
+		.name       = "argus_atp52b:green:run",
+		.gpio       = ARGUS_ATP52B_GPIO_LED_RUN,
+		.active_low = 1,
+	},
+	{
+		.name       = "argus_atp52b:amber:net",
+		.gpio       = ARGUS_ATP52B_GPIO_LED_NET,
+		.active_low = 1,
+	}
+};
+
+static struct gpio_button argus_atp52b_gpio_buttons[] __initdata = {
+	{
+		.desc       = "wps",
+		.type       = EV_KEY,
+		.code       = KEY_WPS_BUTTON,
+		.threshold  = 3,
+		.gpio       = ARGUS_ATP52B_GPIO_BUTTON_WPS,
+		.active_low = 1,
+	},
+	{
+		.desc       = "reset",
+		.type       = EV_KEY,
+		.code       = KEY_RESTART,
+		.threshold  = 10,
+		.gpio       = ARGUS_ATP52B_GPIO_BUTTON_RESET,
+		.active_low = 1,
+	}
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition argus_atp52b_partitions[] = {
+	{
+		.name	= "bootloader",
+		.offset	= 0,
+		.size	= 0x030000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "config",
+		.offset	= 0x030000,
+		.size	= 0x010000,
+	}, {
+		.name	= "factory",
+		.offset	= 0x040000,
+		.size	= 0x010000,
+	}, {
+		.name	= "kernel",
+		.offset	= 0x050000,
+		.size	= 0x120000,
+	}, {
+		.name	= "rootfs",
+		.offset	= 0x170000,
+		.size	= 0x680000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data argus_atp52b_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(argus_atp52b_partitions),
+	.parts		= argus_atp52b_partitions,
+#endif
+};
+
+static void __init argus_atp52b_init(void)
+{
+	rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+	rt305x_register_flash(0, &argus_atp52b_flash_data);
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(argus_atp52b_leds_gpio),
+					argus_atp52b_leds_gpio);
+	ramips_register_gpio_buttons(-1, ARGUS_ATP52B_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(argus_atp52b_gpio_buttons),
+					argus_atp52b_gpio_buttons);
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
+	rt305x_register_ethernet();
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_ARGUS_ATP52B, "ARGUS_ATP52B", "Argus ATP-52B",
+					argus_atp52b_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 69543990f..bbbf0e612 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -199,6 +199,18 @@ define Image/Build/Profile/WCR150GN
 endef
 
 
+mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
+mtd_argus_atp52b_kernel_part_size=1179648
+mtd_argus_atp52b_rootfs_part_size=6815744
+define Image/Build/Template/ARGUS_ATP52B
+	$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
+endef
+
+define Image/Build/Profile/ARGUS_ATP52B
+	$(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B)
+endef
+
+
 mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
 mtd_f5d8235_kernel_part_size=1572864
 mtd_f5d8235_rootfs_part_size=6356992
@@ -213,6 +225,7 @@ endef
 
 ifeq ($(CONFIG_RALINK_RT305X),y)
 define Image/Build/Profile/Default
+	$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
 	$(call Image/Build/Profile/DIR300B1,$(1))
 	$(call Image/Build/Profile/RTG32B1,$(1))
 	$(call Image/Build/Profile/FONERA20N,$(1))
diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39
index bd8887bfa..5357652a8 100644
--- a/target/linux/ramips/rt305x/config-2.6.39
+++ b/target/linux/ramips/rt305x/config-2.6.39
@@ -91,6 +91,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
 # CONFIG_RALINK_RT288X is not set
 CONFIG_RALINK_RT305X=y
 CONFIG_RAMIPS_WDT=y
+CONFIG_RT305X_MACH_ARGUS_ATP52B=y
 CONFIG_RT305X_MACH_DIR_300_REVB=y
 CONFIG_RT305X_MACH_F5D8235_V2=y
 CONFIG_RT305X_MACH_FONERA20N=y