[xburst] Drop 2.6.32 patches

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22485 3c298f89-4303-0410-b956-a3cf2f4a3e73

18 files changed, 0 insertions, 4400 deletions

diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Kconfig b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Kconfig
deleted file mode 100644
index 71d35f7a0..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Kconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-choice
-    prompt "Machine type"
-    depends on MACH_JZ
-    default JZ4740_QI_LB60
-
-config JZ4740_QI_LB60
-	bool "Qi Hardware Ben NanoNote"
-	select DMA_NONCOHERENT
-	select SOC_JZ4740
-
-config JZ4740_N516
-	bool "Hanvon n516 eBook reader"
-	select DMA_NONCOHERENT
-	select SOC_JZ4740
-
-config JZ4740_N526
-	bool "Hanvon n526 eBook reader"
-	select DMA_NONCOHERENT
-	select SOC_JZ4740
-
-
-endchoice
-
-config SOC_JZ4740
-	bool
-	select JZSOC
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select IRQ_CPU
-
-config JZSOC
-	bool
-	select JZRISC
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_SUPPORTS_32BIT_KERNEL
-
-config JZRISC
-	bool
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Makefile b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Makefile
deleted file mode 100644
index f298174e5..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Makefile for the Ingenic JZ4740.
-#
-
-# Object file lists.
-
-obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
-	gpio.o clock.o platform.o
-
-obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o
-
-# board specific support
-
-obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi_lb60.o
-obj-$(CONFIG_JZ4740_N516)	+= board-n516.o board-n516-display.o
-obj-$(CONFIG_JZ4740_N526)	+= board-n526.o
-
-# PM support
-
-obj-$(CONFIG_PM)         += pm.o
-
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n516-display.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n516-display.c
deleted file mode 100644
index a0485da20..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n516-display.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * board-n516-display.c -- Platform device for N516 display
- *
- * Copyright (C) 2009, Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/jz4740_fb.h>
-
-#include <asm/mach-jz4740/platform.h>
-#include <asm/mach-jz4740/board-n516.h>
-
-#include <video/metronomefb.h>
-#include <linux/console.h>
-
-extern struct platform_device jz_lcd_device;
-
-static struct fb_videomode n516_fb_modes[] = {
-	[0] = {
-		.name		= "Metronome 800x600",
-		.refresh	= 50,
-		.xres		= 400,
-		.yres		= 624,
-		.hsync_len	= 31,
-		.vsync_len	= 23,
-		.right_margin	= 31,
-		.left_margin	= 5,
-		.upper_margin	= 1,
-		.lower_margin	= 2,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct jz4740_fb_platform_data n516_fb_pdata = {
-	.num_modes	= ARRAY_SIZE(n516_fb_modes),
-	.modes		= n516_fb_modes,
-	.bpp		= 16,
-	.lcd_type	= JZ_LCD_TYPE_GENERIC_16_BIT,
-};
-
-struct n516_board_info {
-	uint8_t *metromem;
-	size_t wfm_size;
-	struct fb_info *host_fbinfo; /* the host LCD controller's fbi */
-	unsigned int fw;
-	unsigned int fh;
-};
-
-static struct platform_device *n516_device;
-static struct n516_board_info n516_board_info;
-
-static int metronome_gpios[] = {
-	GPIO_DISPLAY_STBY,
-	GPIO_DISPLAY_RST_L,
-	GPIO_DISPLAY_RDY,
-	GPIO_DISPLAY_ERR,
-/*	GPIO_DISPLAY_OFF,*/
-};
-
-static const char *metronome_gpio_names[] = {
-	"Metronome STDBY",
-	"Metronome RST",
-	"Metronome RDY",
-	"Metronome ERR",
-/*	"Metronone OFF",*/
-};
-
-static int n516_enable_hostfb(bool enable)
-{
-	int ret;
-	int blank = enable ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
-
-	acquire_console_sem();
-	ret = fb_blank(n516_board_info.host_fbinfo, blank);
-	release_console_sem();
-
-	return ret;
-}
-
-static int n516_init_metronome_gpios(struct metronomefb_par *par)
-{
-	int i;
-	int ret;
-
-	for (i = 0; i < ARRAY_SIZE(metronome_gpios); ++i) {
-		ret = gpio_request(metronome_gpios[i], metronome_gpio_names[i]);
-		if (ret)
-			goto err;
-	}
-
-	gpio_direction_output(GPIO_DISPLAY_OFF, 0);
-	gpio_direction_output(GPIO_DISPLAY_RST_L, 0);
-	gpio_direction_output(GPIO_DISPLAY_STBY, 0);
-	gpio_direction_input(GPIO_DISPLAY_RDY);
-	gpio_direction_input(GPIO_DISPLAY_ERR);
-
-	return 0;
-err:
-	for (--i; i >= 0; --i)
-		gpio_free(metronome_gpios[i]);
-
-	return ret;
-}
-
-static int n516_share_video_mem(struct fb_info *info)
-{
-	int ret;
-
-	dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
-	dev_dbg(&n516_device->dev, "%s, info->var.xres = %u, info->var.yres = %u\n", __func__, info->var.xres, info->var.yres);
-	/* rough check if this is our desired fb and not something else */
-	if ((info->var.xres != n516_fb_pdata.modes[0].xres)
-		|| (info->var.yres != n516_fb_pdata.modes[0].yres))
-		return 0;
-
-	/* we've now been notified that we have our new fb */
-	n516_board_info.metromem = info->screen_base;
-	n516_board_info.host_fbinfo = info;
-
-	n516_enable_hostfb(false);
-	/* try to refcount host drv since we are the consumer after this */
-	if (!try_module_get(info->fbops->owner))
-		return -ENODEV;
-
-	/* this _add binds metronomefb to n516. metronomefb refcounts n516 */
-	ret = platform_device_add(n516_device);
-
-	if (ret) {
-		platform_device_put(n516_device);
-		return ret;
-	}
-
-	/* request our platform independent driver */
-	request_module("metronomefb");
-
-	return 0;
-}
-
-static int n516_unshare_video_mem(struct fb_info *info)
-{
-	dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
-
-	if (info != n516_board_info.host_fbinfo)
-		return 0;
-
-	module_put(n516_board_info.host_fbinfo->fbops->owner);
-	return 0;
-}
-
-static int n516_fb_notifier_callback(struct notifier_block *self,
-				 unsigned long event, void *data)
-{
-	struct fb_event *evdata = data;
-	struct fb_info *info = evdata->info;
-
-	dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
-
-	if (event == FB_EVENT_FB_REGISTERED)
-		return n516_share_video_mem(info);
-	else if (event == FB_EVENT_FB_UNREGISTERED)
-		return n516_unshare_video_mem(info);
-
-	return 0;
-}
-
-static struct notifier_block n516_fb_notif = {
-	.notifier_call = n516_fb_notifier_callback,
-};
-
-/* this gets called as part of our init. these steps must be done now so
- * that we can use set_pxa_fb_info */
-static void __init n516_presetup_fb(void)
-{
-	int padding_size;
-	int totalsize;
-
-	/* the frame buffer is divided as follows:
-	command | CRC | padding
-	16kb waveform data | CRC | padding
-	image data | CRC
-	*/
-
-	n516_board_info.fw = 800;
-	n516_board_info.fh = 624;
-
-	/* waveform must be 16k + 2 for checksum */
-	n516_board_info.wfm_size = roundup(16*1024 + 2, n516_board_info.fw);
-
-	padding_size = PAGE_SIZE + (4 * n516_board_info.fw);
-
-	/* total is 1 cmd , 1 wfm, padding and image */
-	totalsize = n516_board_info.fw + n516_board_info.wfm_size;
-	totalsize += padding_size + (n516_board_info.fw*n516_board_info.fh);
-
-	/* save this off because we're manipulating fw after this and
-	 * we'll need it when we're ready to setup the framebuffer */
-
-	/* the reason we do this adjustment is because we want to acquire
-	 * more framebuffer memory without imposing custom awareness on the
-	 * underlying driver */
-	n516_fb_pdata.modes[0].yres = DIV_ROUND_UP(totalsize, n516_board_info.fw);
-
-	jz4740_framebuffer_device.dev.platform_data = &n516_fb_pdata;
-	platform_device_register(&jz4740_framebuffer_device);
-}
-
-/* this gets called by metronomefb as part of its init, in our case, we
- * have already completed initial framebuffer init in presetup_fb so we
- * can just setup the fb access pointers */
-static int n516_setup_fb(struct metronomefb_par *par)
-{
-	/* metromem was set up by the notifier in share_video_mem so now
-	 * we can use its value to calculate the other entries */
-	par->metromem_cmd = (struct metromem_cmd *) n516_board_info.metromem;
-	par->metromem_wfm = n516_board_info.metromem + n516_board_info.fw;
-	par->metromem_img = par->metromem_wfm + n516_board_info.wfm_size;
-	par->metromem_img_csum = (u16 *) (par->metromem_img + (n516_board_info.fw * n516_board_info.fh));
-	par->metromem_dma = n516_board_info.host_fbinfo->fix.smem_start;
-
-	return 0;
-}
-
-static int n516_get_panel_type(void)
-{
-	return 5;
-}
-
-static irqreturn_t n516_handle_irq(int irq, void *dev_id)
-{
-	struct metronomefb_par *par = dev_id;
-
-	dev_dbg(&par->pdev->dev, "Metronome IRQ! RDY=%d\n", 	gpio_get_value(GPIO_DISPLAY_RDY));
-	wake_up_all(&par->waitq);
-
-	return IRQ_HANDLED;
-}
-
-static void n516_power_ctl(struct metronomefb_par *par, int cmd)
-{
-	switch (cmd) {
-	case METRONOME_POWER_OFF:
-		gpio_set_value(GPIO_DISPLAY_OFF, 1);
-		n516_enable_hostfb(false);
-		break;
-	case METRONOME_POWER_ON:
-		gpio_set_value(GPIO_DISPLAY_OFF, 0);
-		n516_enable_hostfb(true);
-		break;
-	}
-}
-
-static int n516_get_rdy(struct metronomefb_par *par)
-{
-	return gpio_get_value(GPIO_DISPLAY_RDY);
-}
-
-static int n516_get_err(struct metronomefb_par *par)
-{
-	return gpio_get_value(GPIO_DISPLAY_ERR);
-}
-
-static int n516_setup_irq(struct fb_info *info)
-{
-	int ret;
-
-	dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
-
-	ret = request_irq(gpio_to_irq(GPIO_DISPLAY_RDY), n516_handle_irq,
-				IRQF_TRIGGER_RISING,
-				"n516", info->par);
-	if (ret)
-		dev_err(&n516_device->dev, "request_irq failed: %d\n", ret);
-
-	return ret;
-}
-
-static void n516_set_rst(struct metronomefb_par *par, int state)
-{
-	dev_dbg(&n516_device->dev, "ENTER %s, RDY=%d\n", __func__, gpio_get_value(GPIO_DISPLAY_RDY));
-	if (state)
-		gpio_set_value(GPIO_DISPLAY_RST_L, 1);
-	else
-		gpio_set_value(GPIO_DISPLAY_RST_L, 0);
-}
-
-static void n516_set_stdby(struct metronomefb_par *par, int state)
-{
-	dev_dbg(&n516_device->dev, "ENTER %s, RDY=%d\n", __func__, gpio_get_value(GPIO_DISPLAY_RDY));
-	if (state)
-		gpio_set_value(GPIO_DISPLAY_STBY, 1);
-	else
-		gpio_set_value(GPIO_DISPLAY_STBY, 0);
-}
-
-static int n516_wait_event(struct metronomefb_par *par)
-{
-	unsigned long timeout = jiffies + HZ / 20;
-
-	dev_dbg(&n516_device->dev, "ENTER1 %s, RDY=%d\n",
-			__func__, gpio_get_value(GPIO_DISPLAY_RDY));
-	while (n516_get_rdy(par) && time_before(jiffies, timeout))
-		schedule();
-
-	dev_dbg(&n516_device->dev, "ENTER2 %s, RDY=%d\n",
-			__func__, gpio_get_value(GPIO_DISPLAY_RDY));
-	return wait_event_timeout(par->waitq,
-			n516_get_rdy(par), HZ * 2) ? 0 : -EIO;
-}
-
-static int n516_wait_event_intr(struct metronomefb_par *par)
-{
-	unsigned long timeout = jiffies + HZ/20;
-
-	dev_dbg(&n516_device->dev, "ENTER1 %s, RDY=%d\n",
-			__func__, gpio_get_value(GPIO_DISPLAY_RDY));
-	while (n516_get_rdy(par) && time_before(jiffies, timeout))
-		schedule();
-
-	dev_dbg(&n516_device->dev, "ENTER2 %s, RDY=%d\n",
-			__func__, gpio_get_value(GPIO_DISPLAY_RDY));
-	return wait_event_interruptible_timeout(par->waitq,
-					n516_get_rdy(par), HZ * 2) ? 0 : -EIO;
-}
-
-static void n516_cleanup(struct metronomefb_par *par)
-{
-	int i;
-
-	free_irq(gpio_to_irq(GPIO_DISPLAY_RDY), par);
-	for (i = 0; i < ARRAY_SIZE(metronome_gpios); ++i)
-		gpio_free(metronome_gpios[i]);
-}
-
-static struct metronome_board n516_board __initdata = {
-	.owner			= THIS_MODULE,
-	.power_ctl		= n516_power_ctl,
-	.setup_irq		= n516_setup_irq,
-	.setup_io		= n516_init_metronome_gpios,
-	.setup_fb		= n516_setup_fb,
-	.set_rst		= n516_set_rst,
-	.get_err		= n516_get_err,
-	.get_rdy		= n516_get_rdy,
-	.set_stdby		= n516_set_stdby,
-	.met_wait_event		= n516_wait_event,
-	.met_wait_event_intr	= n516_wait_event_intr,
-	.get_panel_type		= n516_get_panel_type,
-	.cleanup		= n516_cleanup,
-};
-
-static int __init n516_init(void)
-{
-	int ret;
-
-	/* Keep the metronome off, until its driver is loaded */
-	ret = gpio_request(GPIO_DISPLAY_OFF, "Display off");
-	if (ret)
-		return ret;
-
-	gpio_direction_output(GPIO_DISPLAY_OFF, 1);
-
-	/* before anything else, we request notification for any fb
-	 * creation events */
-	fb_register_client(&n516_fb_notif);
-
-	n516_device = platform_device_alloc("metronomefb", -1);
-	if (!n516_device)
-		return -ENOMEM;
-
-	/* the n516_board that will be seen by metronomefb is a copy */
-	platform_device_add_data(n516_device, &n516_board,
-					sizeof(n516_board));
-
-	n516_presetup_fb();
-
-	return 0;
-}
-module_init(n516_init);
-
-MODULE_DESCRIPTION("board driver for n516 display");
-MODULE_AUTHOR("Yauhen Kharuzhy");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n516.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n516.c
deleted file mode 100644
index 0e146ac84..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n516.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * linux/arch/mips/jz4740/board-516.c
- *
- * JZ4740 n516 board setup routines.
- *
- * Copyright (c) 2009, Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mmc/jz4740_mmc.h>
-#include <linux/mtd/jz4740_nand.h>
-#include <linux/leds.h>
-
-#include <linux/power_supply.h>
-#include <linux/power/gpio-charger.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-jz4740/board-n516.h>
-#include <asm/mach-jz4740/platform.h>
-
-#include "clock.h"
-
-static long n516_panic_blink(long time)
-{
-	gpio_set_value(GPIO_LED_ENABLE, 1);
-	mdelay(200);
-	gpio_set_value(GPIO_LED_ENABLE, 0);
-	mdelay(200);
-
-	return 400;
-}
-
-static void __init board_gpio_setup(void)
-{
-/*	jz_gpio_enable_pullup(JZ_GPIO_PORTD(23));
-	jz_gpio_enable_pullup(JZ_GPIO_PORTD(24));*/
-}
-
-static struct i2c_gpio_platform_data n516_i2c_pdata = {
-	.sda_pin = JZ_GPIO_PORTD(23),
-	.scl_pin = JZ_GPIO_PORTD(24),
-	.udelay = 2,
-	.timeout = 3 * HZ,
-};
-
-static struct platform_device n516_i2c_device = {
-	.name = "i2c-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &n516_i2c_pdata,
-	},
-};
-
-static const struct i2c_board_info n516_i2c_board_info[] = {
-	{
-		.type		= "LPC524",
-		.addr		= 0x54,
-	},
-	{
-		.type		= "lm75a",
-		.addr		= 0x48,
-	}
-};
-
-static struct jz4740_mmc_platform_data n516_mmc_pdata = {
-	.gpio_card_detect	= GPIO_SD_CD_N,
-	.card_detect_active_low = 1,
-	.gpio_read_only		= -1,
-	.gpio_power		= GPIO_SD_VCC_EN_N,
-	.power_active_low = 1,
-};
-
-static struct gpio_led n516_leds[] = {
-	{
-		.name = "n516:blue:power",
-		.gpio = GPIO_LED_ENABLE,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-		.default_trigger = "nand-disk",
-	}
-};
-
-static struct gpio_led_platform_data n516_leds_pdata = {
-	.leds = n516_leds,
-	.num_leds = ARRAY_SIZE(n516_leds),
-};
-
-static struct platform_device n516_leds_device = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &n516_leds_pdata,
-	},
-};
-
-static struct mtd_partition n516_partitions[] = {
-	{ .name = "NAND BOOT partition",
-	  .offset = 0 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND KERNEL partition",
-	  .offset = 4 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND ROOTFS partition",
-	  .offset = 8 * 0x100000,
-	  .size = 504 * 0x100000,
- 	},
-};
-
-static struct nand_ecclayout n516_ecclayout = {
-	.eccbytes = 36,
-	.eccpos = {
-		 6,  7,  8,  9, 10, 11, 12, 13, 14,
-		15, 16, 17, 18, 19, 20, 21, 22, 23,
-		24, 25, 26, 27, 28, 29, 30, 31, 32,
-		33, 34, 35, 36, 37, 38, 39, 40, 41,
-	},
-	.oobfree = {
-		{.offset = 2,
-		 .length = 4},
-		{.offset = 42,
-		 .length = 22}}
-};
-
-static struct jz_nand_platform_data n516_nand_pdata = {
-	.ecc_layout = &n516_ecclayout,
-	.partitions = n516_partitions,
-	.num_partitions = ARRAY_SIZE(n516_partitions),
-	.busy_gpio = 94,
-};
-
-static char *n516_batteries[] = {
-	"n516_battery",
-};
-
-static struct gpio_charger_platform_data n516_charger_pdata = {
-	.name = "usb",
-	.type = POWER_SUPPLY_TYPE_USB,
-	.gpio = GPIO_USB_DETECT,
-	.gpio_active_low = 1,
-	.batteries = n516_batteries,
-	.num_batteries = ARRAY_SIZE(n516_batteries),
-};
-
-static struct platform_device n516_charger_device = {
-	.name = "gpio-charger",
-	.dev = {
-		.platform_data = &n516_charger_pdata,
-	},
-};
-
-static struct platform_device *n516_devices[] __initdata = {
-	&jz4740_nand_device,
-	&n516_leds_device,
-	&jz4740_mmc_device,
-	&jz4740_i2s_device,
-	&jz4740_codec_device,
-	&jz4740_rtc_device,
-	&jz4740_usb_gdt_device,
-	&n516_i2c_device,
-	&n516_charger_device,
-};
-
-struct jz4740_clock_board_data jz4740_clock_bdata = {
-	.ext_rate = 12000000,
-	.rtc_rate = 32768,
-};
-
-extern int jz_gpiolib_init(void);
-
-static int n516_setup_platform(void)
-{
-	if (jz_gpiolib_init())
-		panic("Failed to initalize jz gpio\n");
-
-	jz4740_clock_init();
-	board_gpio_setup();
-
-	panic_blink = n516_panic_blink;
-	i2c_register_board_info(0, n516_i2c_board_info, ARRAY_SIZE(n516_i2c_board_info));
-	jz4740_mmc_device.dev.platform_data = &n516_mmc_pdata;
-	jz4740_nand_device.dev.platform_data = &n516_nand_pdata;
-
-	return platform_add_devices(n516_devices, ARRAY_SIZE(n516_devices));
-}
-arch_initcall(n516_setup_platform);
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c
deleted file mode 100644
index e3e671011..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- *  Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
- *  	N526 eBook reader support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-jz4740/platform.h>
-
-#include <linux/mtd/jz4740_nand.h>
-#include <linux/jz4740_fb.h>
-#include <linux/power_supply.h>
-#include <linux/mmc/jz4740_mmc.h>
-
-#include <video/broadsheetfb.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include "clock.h"
-
-/* NAND */
-static struct nand_ecclayout n526_ecclayout = {
-	.eccbytes = 36,
-	.eccpos = {
-		6,  7,  8,  9,  10, 11, 12, 13,
-		14, 15, 16, 17, 18, 19, 20, 21,
-		22, 23, 24, 25, 26, 27, 28, 29,
-		30, 31, 32, 33, 34, 35, 36, 37,
-		38, 39, 40, 41},
-	.oobfree = {
-		{.offset = 2,
-		 .length = 4},
-		{.offset = 42,
-		 .length = 22}}
-};
-
-static struct mtd_partition n526_partitions[] = {
-	{ .name = "NAND BOOT partition",
-	  .offset = 0 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND KERNEL partition",
-	  .offset = 4 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND ROOTFS partition",
-	  .offset = 16 * 0x100000,
-	  .size = 498 * 0x100000,
- 	},
-};
-
-static struct jz_nand_platform_data n526_nand_pdata = {
-	.ecc_layout = &n526_ecclayout,
-	.partitions = n526_partitions,
-	.num_partitions = ARRAY_SIZE(n526_partitions),
-	.busy_gpio = 94,
-};
-
-static struct jz4740_mmc_platform_data n526_mmc_pdata = {
-	.gpio_card_detect	= JZ_GPIO_PORTD(7),
-	.card_detect_active_low = 1,
-	.gpio_read_only		= -1,
-	.gpio_power		= JZ_GPIO_PORTD(17),
-	.power_active_low = 1,
-};
-
-static struct gpio_led n526_leds[] = {
-	{
-		.name = "n526:blue:power",
-		.gpio = JZ_GPIO_PORTD(28),
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	}
-};
-
-static struct gpio_led_platform_data n526_leds_pdata = {
-	.leds = n526_leds,
-	.num_leds = ARRAY_SIZE(n526_leds),
-};
-
-static struct platform_device n526_leds_device = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &n526_leds_pdata,
-	},
-};
-
-static void __init board_gpio_setup(void)
-{
-	/* We only need to enable/disable pullup here for pins used in generic
-	 * drivers. Everything else is done by the drivers themselfs. */
-	jz_gpio_disable_pullup(JZ_GPIO_PORTD(17));
-	jz_gpio_enable_pullup(JZ_GPIO_PORTD(7));
-	jz_gpio_disable_pullup(JZ_GPIO_PORTC(19));
-	jz_gpio_disable_pullup(JZ_GPIO_PORTC(20));
-	jz_gpio_disable_pullup(JZ_GPIO_PORTC(21));
-	jz_gpio_disable_pullup(JZ_GPIO_PORTC(23));
-}
-
-
-static const int n526_eink_ctrl_gpios[] = {
-	0,
-	JZ_GPIO_PORTC(23),
-	JZ_GPIO_PORTC(19),
-	JZ_GPIO_PORTC(20),
-};
-
-static void n526_eink_set_ctl(struct broadsheetfb_par * par, unsigned char ctrl, u8
-value)
-{
-	gpio_set_value(n526_eink_ctrl_gpios[ctrl], value);
-}
-
-
-static int n526_eink_wait(struct broadsheetfb_par *par)
-{
-	wait_event(par->waitq, gpio_get_value(JZ_GPIO_PORTB(17)));
-
-	return 0;
-}
-
-static u16 n526_eink_get_hdb(struct broadsheetfb_par *par)
-{
-	u16 value = 0;
-	jz_gpio_port_direction_input(JZ_GPIO_PORTC(0), 0xffff);
-	gpio_set_value(JZ_GPIO_PORTC(21), 0);
-	mdelay(100);
-
-	value = jz_gpio_port_get_value(JZ_GPIO_PORTC(0), 0xffff);
-
-	gpio_set_value(JZ_GPIO_PORTC(21), 1);
-	jz_gpio_port_direction_output(JZ_GPIO_PORTC(0), 0xffff);
-	return value;
-}
-
-static void n526_eink_set_hdb(struct broadsheetfb_par *par, u16 value)
-{
-	jz_gpio_port_set_value(JZ_GPIO_PORTC(0), value, 0xffff);
-}
-
-static int n526_eink_init(struct broadsheetfb_par *par)
-{
-	int i;
-
-	gpio_request(JZ_GPIO_PORTD(1), "display reset");
-	gpio_direction_output(JZ_GPIO_PORTD(1), 1);
-	mdelay(10);
-	gpio_set_value(JZ_GPIO_PORTD(1), 0);
-
-	gpio_request(JZ_GPIO_PORTB(18), "eink enable");
-	gpio_direction_output(JZ_GPIO_PORTB(18), 0);
-
-	gpio_request(JZ_GPIO_PORTB(29), "foobar");
-	gpio_direction_output(JZ_GPIO_PORTB(29), 1);
-
-	for(i = 1; i < ARRAY_SIZE(n526_eink_ctrl_gpios); ++i) {
-		gpio_request(n526_eink_ctrl_gpios[i], "eink display ctrl");
-		gpio_direction_output(n526_eink_ctrl_gpios[i], 0);
-	}
-
-	gpio_request(JZ_GPIO_PORTC(22), "foobar");
-	gpio_direction_input(JZ_GPIO_PORTC(22));
-	gpio_request(JZ_GPIO_PORTC(21), "eink nRD");
-	gpio_direction_output(JZ_GPIO_PORTC(21), 1);
-
-	for(i = 0; i < 16; ++i) {
-		gpio_request(JZ_GPIO_PORTC(i), "eink display data");
-	}
-	jz_gpio_port_direction_output(JZ_GPIO_PORTC(0), 0xffff);
-
-	gpio_set_value(JZ_GPIO_PORTB(18), 1);
-
-	return 0;
-}
-
-static irqreturn_t n526_eink_busy_irq(int irq, void *devid)
-{
-	struct broadsheetfb_par *par = devid;
-	wake_up(&par->waitq);
-
-	return IRQ_HANDLED;
-}
-
-static int n526_eink_setup_irq(struct fb_info *info)
-{
-	int ret;
-	struct broadsheetfb_par *par = info->par;
-
-	gpio_request(JZ_GPIO_PORTB(17), "eink busy");
-	gpio_direction_input(JZ_GPIO_PORTB(17));
-
-	ret = request_irq(gpio_to_irq(JZ_GPIO_PORTB(17)), n526_eink_busy_irq,
-				IRQF_DISABLED | IRQF_TRIGGER_RISING,
-				"eink busyline", par);
-	if (ret)
-		printk("n526 display: Failed to request busyline irq: %d\n", ret);
-	return 0;
-}
-
-static void n526_eink_cleanup(struct broadsheetfb_par *par)
-{
-}
-
-static struct broadsheet_board broadsheet_pdata = {
-	.owner = THIS_MODULE,
-	.init = n526_eink_init,
-	.wait_for_rdy = n526_eink_wait,
-	.set_ctl = n526_eink_set_ctl,
-	.set_hdb = n526_eink_set_hdb,
-	.get_hdb = n526_eink_get_hdb,
-	.cleanup = n526_eink_cleanup,
-	.setup_irq = n526_eink_setup_irq,
-};
-
-static struct platform_device n526_broadsheet_device = {
-	.name = "broadsheetfb",
-	.id = -1,
-	.dev = {
-		.platform_data = &broadsheet_pdata,
-	},
-};
-
-static struct gpio_keys_button qi_lb60_gpio_keys_buttons[] = {
-	[0] = {
-		.code		= KEY_ENTER,
-		.gpio		= 0,
-		.active_low	= 1,
-		.desc		= "Power",
-	},
-};
-
-static struct gpio_keys_platform_data qi_lb60_gpio_keys_data = {
-	.nbuttons = ARRAY_SIZE(qi_lb60_gpio_keys_buttons),
-	.buttons = qi_lb60_gpio_keys_buttons,
-};
-
-static struct platform_device qi_lb60_gpio_keys = {
-	.name =	"gpio-keys",
-	.id =	-1,
-	.dev = {
-		.platform_data = &qi_lb60_gpio_keys_data,
-	}
-};
-
-static struct i2c_gpio_platform_data n526_i2c_pdata = {
-	.sda_pin = JZ_GPIO_PORTD(23),
-	.scl_pin = JZ_GPIO_PORTD(24),
-	.udelay = 2,
-	.timeout = 3 * HZ,
-};
-
-static struct platform_device n526_i2c_device = {
-	.name = "i2c-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &n526_i2c_pdata,
-	},
-};
-
-static struct i2c_board_info n526_i2c_board_info = {
-	.type = "n526-lpc",
-	.addr = 0x54,
-};
-
-static struct platform_device *jz_platform_devices[] __initdata = {
-	&jz4740_usb_ohci_device,
-	&jz4740_usb_gdt_device,
-	&jz4740_mmc_device,
-	&jz4740_nand_device,
-	&jz4740_i2s_device,
-	&jz4740_codec_device,
-	&jz4740_rtc_device,
-	&n526_leds_device,
-	&n526_broadsheet_device,
-	&qi_lb60_gpio_keys,
-	&n526_i2c_device,
-};
-
-
-static int __init n526_init_platform_devices(void)
-{
-
-	jz4740_nand_device.dev.platform_data = &n526_nand_pdata;
-	jz4740_mmc_device.dev.platform_data = &n526_mmc_pdata;
-
-	n526_i2c_board_info.irq = gpio_to_irq(JZ_GPIO_PORTD(14)),
-	i2c_register_board_info(0, &n526_i2c_board_info, 1);
-
-	return platform_add_devices(jz_platform_devices,
-					ARRAY_SIZE(jz_platform_devices));
-
-}
-
-struct jz4740_clock_board_data jz4740_clock_bdata = {
-	.ext_rate = 12000000,
-	.rtc_rate = 32768,
-};
-
-extern int jz_gpiolib_init(void);
-
-static int __init n526_board_setup(void)
-{
-	if (jz_gpiolib_init())
-		panic("Failed to initalize jz gpio\n");
-
-	jz4740_clock_init();
-	board_gpio_setup();
-
-	if (n526_init_platform_devices())
-		panic("Failed to initalize platform devices\n");
-
-	return 0;
-}
-
-arch_initcall(n526_board_setup);
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c
deleted file mode 100644
index 800441716..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * linux/arch/mips/jz4740/board-qi_lb60.c
- *
- * QI_LB60 setup routines.
- *
- * Copyright (c) 2009 Qi Hardware inc.,
- * Author: Xiangfu Liu <xiangfu@qi-hardware.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 or later
- * as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-jz4740/board-qi_lb60.h>
-#include <asm/mach-jz4740/platform.h>
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/jz4740_nand.h>
-#include <linux/jz4740_fb.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/mtd/jz4740_nand.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/power_supply.h>
-#include <linux/power/jz4740-battery.h>
-#include <linux/power/gpio-charger.h>
-#include <linux/mmc/jz4740_mmc.h>
-
-#include "clock.h"
-
-/* NAND */
-static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
-	.eccbytes = 36,
-	.eccpos = {
-		6,  7,  8,  9,  10, 11, 12, 13,
-		14, 15, 16, 17, 18, 19, 20, 21,
-		22, 23, 24, 25, 26, 27, 28, 29,
-		30, 31, 32, 33, 34, 35, 36, 37,
-		38, 39, 40, 41},
-	.oobfree = {
-		{.offset = 2,
-		 .length = 4},
-		{.offset = 42,
-		 .length = 22}}
-};
-
-static struct mtd_partition qi_lb60_partitions_1gb[] = {
-	{ .name = "NAND BOOT partition",
-	  .offset = 0 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND KERNEL partition",
-	  .offset = 4 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND ROOTFS partition",
-	  .offset = 8 * 0x100000,
-	  .size = (504 + 512) * 0x100000,
- 	},
-};
-
-static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
-	.eccbytes = 72,
-	.eccpos = {
-		12, 13, 14, 15, 16, 17, 18, 19,
-		20, 21, 22, 23, 24, 25, 26, 27, 
-		28, 29, 30, 31, 32, 33, 34, 35,
-		36, 37, 38, 39, 40, 41, 42, 43,
-		44, 45, 46, 47, 48, 49, 50, 51, 
-		52, 53, 54, 55, 56, 57, 58, 59, 
-		60, 61, 62, 63, 64, 65, 66, 67, 
-		68, 69, 70, 71, 72, 73, 74, 75, 
-		76, 77, 78, 79, 80, 81, 82, 83},
-	.oobfree = {
- 		{.offset = 2,
-		 .length = 10},
-		{.offset = 84,
-		 .length = 44}}
-};
-
-static struct mtd_partition qi_lb60_partitions_2gb[] = {
-	{ .name = "NAND BOOT partition",
-	  .offset = 0 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND KERNEL partition",
-	  .offset = 4 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND ROOTFS partition",
-	  .offset = 8 * 0x100000,
-	  .size = (504 + 512 + 1024) * 0x100000,
- 	},
-};
-
-static void qi_lb60_nand_ident(struct platform_device *pdev,
-				struct nand_chip *chip, 
-				struct mtd_partition **partitions,
-				int *num_partitions)
-{
-	if (chip->page_shift == 12) {
-		chip->ecc.layout = &qi_lb60_ecclayout_2gb;
-		*partitions = qi_lb60_partitions_2gb;
-		*num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb);
-	} else {
-		chip->ecc.layout = &qi_lb60_ecclayout_1gb;
-		*partitions = qi_lb60_partitions_1gb;
-		*num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb);
-	}
-}
-
-static struct jz_nand_platform_data qi_lb60_nand_pdata = {
-	.ident_callback = qi_lb60_nand_ident,
-	.busy_gpio = 94,
-};
-
-/* Keyboard*/
-
-/* #define KEEP_UART_ALIVE
- * don't define this. the keyboard and keyboard both work
- */
-
-#define KEY_QI_QI	KEY_F13
-#define KEY_QI_UPRED	KEY_RIGHTALT
-#define KEY_QI_VOLUP	KEY_VOLUMEUP
-#define KEY_QI_VOLDOWN	KEY_VOLUMEDOWN
-#define KEY_QI_FN	KEY_LEFTCTRL
-
-static const uint32_t qi_lb60_keymap[] = {
-	KEY(0, 0, KEY_F1),	/* S2 */
-	KEY(0, 1, KEY_F2),	/* S3 */
-	KEY(0, 2, KEY_F3),	/* S4 */
-	KEY(0, 3, KEY_F4),	/* S5 */
-	KEY(0, 4, KEY_F5),	/* S6 */
-	KEY(0, 5, KEY_F6),	/* S7 */
-	KEY(0, 6, KEY_F7),	/* S8 */
-
-	KEY(1, 0, KEY_Q),	/* S10 */
-	KEY(1, 1, KEY_W),	/* S11 */
-	KEY(1, 2, KEY_E),	/* S12 */
-	KEY(1, 3, KEY_R),	/* S13 */
-	KEY(1, 4, KEY_T),	/* S14 */
-	KEY(1, 5, KEY_Y),	/* S15 */
-	KEY(1, 6, KEY_U),	/* S16 */
-	KEY(1, 7, KEY_I),	/* S17 */
-	KEY(2, 0, KEY_A),	/* S18 */
-	KEY(2, 1, KEY_S),	/* S19 */
-	KEY(2, 2, KEY_D),	/* S20 */
-	KEY(2, 3, KEY_F),	/* S21 */
-	KEY(2, 4, KEY_G),	/* S22 */
-	KEY(2, 5, KEY_H),	/* S23 */
-	KEY(2, 6, KEY_J),	/* S24 */
-	KEY(2, 7, KEY_K),	/* S25 */
-	KEY(3, 0, KEY_ESC),	/* S26 */
-	KEY(3, 1, KEY_Z),	/* S27 */
-	KEY(3, 2, KEY_X),	/* S28 */
-	KEY(3, 3, KEY_C),	/* S29 */
-	KEY(3, 4, KEY_V),	/* S30 */
-	KEY(3, 5, KEY_B),	/* S31 */
-	KEY(3, 6, KEY_N),	/* S32 */
-	KEY(3, 7, KEY_M),	/* S33 */
-	KEY(4, 0, KEY_TAB),	/* S34 */
-	KEY(4, 1, KEY_CAPSLOCK),	/* S35 */
-	KEY(4, 2, KEY_BACKSLASH),	/* S36 */
-	KEY(4, 3, KEY_APOSTROPHE),	/* S37 */
-	KEY(4, 4, KEY_COMMA),	/* S38 */
-	KEY(4, 5, KEY_DOT),	/* S39 */
-	KEY(4, 6, KEY_SLASH),	/* S40 */
-	KEY(4, 7, KEY_UP),	/* S41 */
-	KEY(5, 0, KEY_O),	/* S42 */
-	KEY(5, 1, KEY_L),	/* S43 */
-	KEY(5, 2, KEY_EQUAL),	/* S44 */
-	KEY(5, 3, KEY_QI_UPRED),	/* S45 */
-	KEY(5, 4, KEY_SPACE),	/* S46 */
-	KEY(5, 5, KEY_QI_QI),	/* S47 */
-	KEY(5, 6, KEY_RIGHTCTRL),	/* S48 */
-	KEY(5, 7, KEY_LEFT),	/* S49 */
-	KEY(6, 0, KEY_F8),	/* S50 */
-	KEY(6, 1, KEY_P),	/* S51 */
-	KEY(6, 2, KEY_BACKSPACE),/* S52 */
-	KEY(6, 3, KEY_ENTER),	/* S53 */
-	KEY(6, 4, KEY_QI_VOLUP),	/* S54 */
-	KEY(6, 5, KEY_QI_VOLDOWN),	/* S55 */
-	KEY(6, 6, KEY_DOWN),	/* S56 */
-	KEY(6, 7, KEY_RIGHT),	/* S57 */
-
-#ifndef KEEP_UART_ALIVE
-	KEY(7, 0, KEY_LEFTSHIFT),	/* S58 */
-	KEY(7, 1, KEY_LEFTALT),	/* S59 */
-	KEY(7, 2, KEY_QI_FN),	/* S60 */
-#endif
-};
-
-static const struct matrix_keymap_data qi_lb60_keymap_data = {
-	.keymap		= qi_lb60_keymap,
-	.keymap_size	= ARRAY_SIZE(qi_lb60_keymap),
-};
-
-static const unsigned int qi_lb60_keypad_cols[] = {
-	74, 75, 76, 77, 78, 79, 80, 81,
-};
-
-static const unsigned int qi_lb60_keypad_rows[] = {
-	114, 115, 116, 117, 118, 119, 120,
-#ifndef KEEP_UART_ALIVE
-	122,
-#endif
-};
-
-static struct matrix_keypad_platform_data qi_lb60_pdata = {
-	.keymap_data = &qi_lb60_keymap_data,
-	.col_gpios	= qi_lb60_keypad_cols,
-	.row_gpios	= qi_lb60_keypad_rows,
-	.num_col_gpios	= ARRAY_SIZE(qi_lb60_keypad_cols),
-	.num_row_gpios	= ARRAY_SIZE(qi_lb60_keypad_rows),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-	.active_low		= 1,
-};
-
-static struct platform_device qi_lb60_keypad = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &qi_lb60_pdata,
-	},
-};
-
-/* Display */
-static struct fb_videomode qi_lb60_video_modes[] = {
-	{
-		.name = "320x240",
-		.xres = 320,
-		.yres = 240,
-		.refresh = 30,
-		.left_margin = 140,
-		.right_margin = 273,
-		.upper_margin = 20,
-		.lower_margin = 2,
-		.hsync_len = 1,
-		.vsync_len = 1,
-		.sync = 0,
-		.vmode = FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct jz4740_fb_platform_data qi_lb60_fb_pdata = {
-	.width		= 60,
-	.height		= 45,
-	.num_modes	= ARRAY_SIZE(qi_lb60_video_modes),
-	.modes		= qi_lb60_video_modes,
-	.bpp		= 24,
-	.lcd_type	= JZ_LCD_TYPE_8BIT_SERIAL,
-	.pixclk_falling_edge = 1,
-};
-
-
-struct spi_gpio_platform_data spigpio_platform_data = {
-	.sck = JZ_GPIO_PORTC(23),
-	.mosi = JZ_GPIO_PORTC(22),
-	.miso = JZ_GPIO_PORTC(22),
-	.num_chipselect = 1,
-};
-
-static struct platform_device spigpio_device = {
-	.name = "spi_gpio",
-	.id   = 1,
-	.dev = {
-		.platform_data = &spigpio_platform_data,
-	},
-};
-
-static struct spi_board_info qi_lb60_spi_board_info[] = {
-	{
-		.modalias = "gpm940b0",
-		.controller_data = (void*)JZ_GPIO_PORTC(21),
-		.chip_select = 0,
-		.bus_num = 1,
-		.max_speed_hz = 30 * 1000,
-	},
-};
-
-/* Battery */
-static struct jz_battery_platform_data qi_lb60_battery_pdata = {
-	.gpio_charge = GPIO_CHARG_STAT_N,
-	.gpio_charge_active_low = 1,
-	.info = {
-		.name = "battery",
-		.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-		.voltage_max_design = 4200000,
-		.voltage_min_design = 3600000,
-	},
-};
-
-static char *qi_lb60_batteries[] = {
-	"battery",
-};
-
-static struct gpio_charger_platform_data qi_lb60_charger_pdata = {
-	.name = "USB",
-	.type = POWER_SUPPLY_TYPE_USB,
-	.gpio = GPIO_USB_DETE,
-	.gpio_active_low = 1,
-	.batteries = qi_lb60_batteries,
-	.num_batteries = ARRAY_SIZE(qi_lb60_batteries),
-};
-
-static struct platform_device qi_lb60_charger_device = {
-	.name = "gpio-charger",
-	.dev = {
-		.platform_data = &qi_lb60_charger_pdata,
-	},
-};
-
-/* GPIO Key: power */
-static struct gpio_keys_button qi_lb60_gpio_keys_buttons[] = {
-	[0] = {
-		.code		= KEY_POWER,
-		.gpio		= GPIO_WAKEUP_N,
-		.active_low	= 1,
-		.desc		= "Power",
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data qi_lb60_gpio_keys_data = {
-	.nbuttons = ARRAY_SIZE(qi_lb60_gpio_keys_buttons),
-	.buttons = qi_lb60_gpio_keys_buttons,
-};
-
-static struct platform_device qi_lb60_gpio_keys = {
-	.name =	"gpio-keys",
-	.id =	-1,
-	.dev = {
-		.platform_data = &qi_lb60_gpio_keys_data,
-	}
-};
-
-static struct jz4740_mmc_platform_data qi_lb60_mmc_pdata = {
-	.gpio_card_detect	= JZ_GPIO_PORTD(0),
-	.gpio_read_only		= -1,
-	.gpio_power		= JZ_GPIO_PORTD(2),
-	.power_active_low	= 1,
-};
-
-static struct platform_device *jz_platform_devices[] __initdata = {
-	&jz4740_usb_ohci_device,
-	&jz4740_usb_gdt_device,
-	&jz4740_mmc_device,
-	&jz4740_nand_device,
-	&qi_lb60_keypad,
-	&spigpio_device,
-	&jz4740_framebuffer_device,
-	&jz4740_i2s_device,
-	&jz4740_codec_device,
-	&jz4740_rtc_device,
-	&jz4740_adc_device,
-	&jz4740_battery_device,
-	&qi_lb60_gpio_keys,
-	&qi_lb60_charger_device,
-};
-
-static void __init board_gpio_setup(void)
-{
-	/* We only need to enable/disable pullup here for pins used in generic
-	 * drivers. Everything else is done by the drivers themselfs. */
-	jz_gpio_disable_pullup(GPIO_SD_VCC_EN_N);
-	jz_gpio_disable_pullup(GPIO_SD_CD_N);
-}
-
-static int __init qi_lb60_init_platform_devices(void)
-{
-	jz4740_framebuffer_device.dev.platform_data = &qi_lb60_fb_pdata;
-	jz4740_nand_device.dev.platform_data = &qi_lb60_nand_pdata;
-	jz4740_battery_device.dev.platform_data = &qi_lb60_battery_pdata;
-	jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata;
-
-	spi_register_board_info(qi_lb60_spi_board_info,
-				ARRAY_SIZE(qi_lb60_spi_board_info));
-
-	return platform_add_devices(jz_platform_devices,
-					ARRAY_SIZE(jz_platform_devices));
-
-}
-
-struct jz4740_clock_board_data jz4740_clock_bdata = {
-	.ext_rate = 12000000,
-	.rtc_rate = 32768,
-};
-
-extern int jz_gpiolib_init(void);
-
-static __init int board_avt2(char *str)
-{
-	qi_lb60_mmc_pdata.card_detect_active_low = 1;
-	qi_lb60_mmc_pdata.power_active_low	= 1;
-
-	return 1;
-}
-
-__setup("avt2", board_avt2);
-
-static int __init qi_lb60_board_setup(void)
-{
-	printk("Qi Hardware JZ4740 QI_LB60 setup\n");
-	if (jz_gpiolib_init())
-		panic("Failed to initalize jz gpio\n");
-
-	jz4740_clock_init();
-	board_gpio_setup();
-
-	if (qi_lb60_init_platform_devices())
-		panic("Failed to initalize platform devices\n");
-
-	return 0;
-}
-
-arch_initcall(qi_lb60_board_setup);
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock-debugfs.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock-debugfs.c
deleted file mode 100644
index 8968f7c67..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock-debugfs.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  	JZ4740 SoC clock support debugfs entries
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>
-
-#include <asm/mach-jz4740/clock.h>
-#include "clock.h"
-
-static struct dentry *jz4740_clock_debugfs;
-
-static int jz4740_clock_debugfs_show_enabled(void *data, uint64_t *value)
-{
-	struct clk *clk = data;
-	*value = clk_is_enabled(clk);
-
-	return 0;
-}
-
-static int jz4740_clock_debugfs_set_enabled(void *data, uint64_t value)
-{
-	struct clk *clk = data;
-
-	if (value)
-		return clk_enable(clk);
-	else
-		clk_disable(clk);
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(jz4740_clock_debugfs_ops_enabled,
-	jz4740_clock_debugfs_show_enabled,
-	jz4740_clock_debugfs_set_enabled,
-	"%llu\n");
-
-static int jz4740_clock_debugfs_show_rate(void *data, uint64_t *value)
-{
-	struct clk *clk = data;
-	*value = clk_get_rate(clk);
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(jz4740_clock_debugfs_ops_rate,
-	jz4740_clock_debugfs_show_rate,
-	NULL,
-	"%llu\n");
-
-void jz4740_clock_debugfs_add_clk(struct clk *clk)
-{
-	if (!jz4740_clock_debugfs)
-	    return;
-
-	clk->debugfs_entry = debugfs_create_dir(clk->name, jz4740_clock_debugfs);
-	debugfs_create_file("rate", S_IWUGO | S_IRUGO, clk->debugfs_entry, clk,
-				&jz4740_clock_debugfs_ops_rate);
-	debugfs_create_file("enabled", S_IRUGO, clk->debugfs_entry, clk,
-				&jz4740_clock_debugfs_ops_enabled);
-
-	if (clk->parent) {
-		char parent_path[100];
-		snprintf(parent_path, 100, "../%s", clk->parent->name);
-		clk->debugfs_parent_entry = debugfs_create_symlink("parent",
-						clk->debugfs_entry,
-						parent_path);
-	}
-}
-
-/* TODO: Locking */
-void jz4740_clock_debugfs_update_parent(struct clk *clk)
-{
-	if (clk->debugfs_parent_entry)
-		debugfs_remove(clk->debugfs_parent_entry);
-
-	if (clk->parent) {
-		char parent_path[100];
-		snprintf(parent_path, 100, "../%s", clk->parent->name);
-		clk->debugfs_parent_entry = debugfs_create_symlink("parent",
-						clk->debugfs_entry,
-						parent_path);
-	} else {
-		clk->debugfs_parent_entry = NULL;
-	}
-}
-
-void jz4740_clock_debugfs_init(void)
-{
-	jz4740_clock_debugfs = debugfs_create_dir("jz4740-clock", NULL);
-	if (IS_ERR(jz4740_clock_debugfs))
-		jz4740_clock_debugfs = NULL;
-}
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.c
deleted file mode 100644
index a780706be..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.c
+++ /dev/null
@@ -1,930 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  	JZ4740 SoC clock support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/err.h>
-
-#include <asm/mach-jz4740/clock.h>
-#include "clock.h"
-
-#define JZ_REG_CLOCK_CTRL	0x00
-#define JZ_REG_CLOCK_LOW_POWER	0x04
-#define JZ_REG_CLOCK_PLL	0x10
-#define JZ_REG_CLOCK_GATE	0x20
-#define JZ_REG_CLOCK_SLEEP_CTRL	0x24
-#define JZ_REG_CLOCK_I2S	0x60
-#define JZ_REG_CLOCK_LCD	0x64
-#define JZ_REG_CLOCK_MMC	0x68
-#define JZ_REG_CLOCK_UHC	0x6C
-#define JZ_REG_CLOCK_SPI	0x74
-
-#define JZ_CLOCK_CTRL_I2S_SRC_PLL	BIT(31)
-#define JZ_CLOCK_CTRL_KO_ENABLE		BIT(30)
-#define JZ_CLOCK_CTRL_UDC_SRC_PLL	BIT(29)
-#define JZ_CLOCK_CTRL_UDIV_MASK		0x1f800000
-#define JZ_CLOCK_CTRL_CHANGE_ENABLE	BIT(22)
-#define JZ_CLOCK_CTRL_PLL_HALF		BIT(21)
-#define JZ_CLOCK_CTRL_LDIV_MASK		0x001f0000
-#define JZ_CLOCK_CTRL_UDIV_OFFSET	23
-#define JZ_CLOCK_CTRL_LDIV_OFFSET	16
-#define JZ_CLOCK_CTRL_MDIV_OFFSET	12
-#define JZ_CLOCK_CTRL_PDIV_OFFSET	 8
-#define JZ_CLOCK_CTRL_HDIV_OFFSET	 4
-#define JZ_CLOCK_CTRL_CDIV_OFFSET	 0
-
-#define JZ_CLOCK_GATE_UART0	BIT(0)
-#define JZ_CLOCK_GATE_TCU	BIT(1)
-#define JZ_CLOCK_GATE_RTC	BIT(2)
-#define JZ_CLOCK_GATE_I2C	BIT(3)
-#define JZ_CLOCK_GATE_SPI	BIT(4)
-#define JZ_CLOCK_GATE_AIC	BIT(5)
-#define JZ_CLOCK_GATE_I2S	BIT(6)
-#define JZ_CLOCK_GATE_MMC	BIT(7)
-#define JZ_CLOCK_GATE_ADC	BIT(8)
-#define JZ_CLOCK_GATE_CIM	BIT(9)
-#define JZ_CLOCK_GATE_LCD	BIT(10)
-#define JZ_CLOCK_GATE_UDC	BIT(11)
-#define JZ_CLOCK_GATE_DMAC	BIT(12)
-#define JZ_CLOCK_GATE_IPU	BIT(13)
-#define JZ_CLOCK_GATE_UHC	BIT(14)
-#define JZ_CLOCK_GATE_UART1	BIT(15)
-
-#define JZ_CLOCK_I2S_DIV_MASK		0x01ff
-
-#define JZ_CLOCK_LCD_DIV_MASK		0x01ff
-
-#define JZ_CLOCK_MMC_DIV_MASK		0x001f
-
-#define JZ_CLOCK_UHC_DIV_MASK		0x000f
-
-#define JZ_CLOCK_SPI_SRC_PLL		BIT(31)
-#define JZ_CLOCK_SPI_DIV_MASK		0x000f
-
-#define JZ_CLOCK_PLL_M_MASK		0x01ff
-#define JZ_CLOCK_PLL_N_MASK		0x001f
-#define JZ_CLOCK_PLL_OD_MASK		0x0003
-#define JZ_CLOCK_PLL_STABLE		BIT(10)
-#define JZ_CLOCK_PLL_BYPASS		BIT(9)
-#define JZ_CLOCK_PLL_ENABLED		BIT(8)
-#define JZ_CLOCK_PLL_STABLIZE_MASK	0x000f
-#define JZ_CLOCK_PLL_M_OFFSET		23
-#define JZ_CLOCK_PLL_N_OFFSET		18
-#define JZ_CLOCK_PLL_OD_OFFSET		16
-
-#define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2)
-#define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0)
-
-#define JZ_CLOCK_SLEEP_CTRL_SUSPEND_UHC BIT(7)
-#define JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC BIT(6)
-
-static void __iomem *jz_clock_base;
-static spinlock_t jz_clock_lock;
-static LIST_HEAD(jz_clocks);
-
-struct main_clk {
-	struct clk clk;
-	uint32_t div_offset;
-};
-
-struct divided_clk {
-	struct clk clk;
-	uint32_t reg;
-	uint32_t mask;
-};
-
-struct static_clk {
-	struct clk clk;
-	unsigned long rate;
-};
-
-static uint32_t jz_clk_reg_read(int reg)
-{
-	return readl(jz_clock_base + reg);
-}
-
-static void jz_clk_reg_write_mask(int reg, uint32_t val, uint32_t mask)
-{
-	uint32_t val2;
-
-	spin_lock(&jz_clock_lock);
-	val2 = readl(jz_clock_base + reg);
-	val2 &= ~mask;
-	val2 |= val;
-	writel(val2, jz_clock_base + reg);
-	spin_unlock(&jz_clock_lock);
-}
-
-static void jz_clk_reg_set_bits(int reg, uint32_t mask)
-{
-	uint32_t val;
-
-	spin_lock(&jz_clock_lock);
-	val = readl(jz_clock_base + reg);
-	val |= mask;
-	writel(val, jz_clock_base + reg);
-	spin_unlock(&jz_clock_lock);
-}
-
-static void jz_clk_reg_clear_bits(int reg, uint32_t mask)
-{
-	uint32_t val;
-
-	spin_lock(&jz_clock_lock);
-	val = readl(jz_clock_base + reg);
-	val &= ~mask;
-	writel(val, jz_clock_base + reg);
-	spin_unlock(&jz_clock_lock);
-}
-
-static int jz_clk_enable_gating(struct clk *clk)
-{
-	if (clk->gate_bit == JZ4740_CLK_NOT_GATED)
-		return -EINVAL;
-
-	jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, clk->gate_bit);
-	return 0;
-}
-
-static int jz_clk_disable_gating(struct clk *clk)
-{
-	if (clk->gate_bit == JZ4740_CLK_NOT_GATED)
-		return -EINVAL;
-
-	jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE, clk->gate_bit);
-	return 0;
-}
-
-static int jz_clk_is_enabled_gating(struct clk *clk)
-{
-	if (clk->gate_bit == JZ4740_CLK_NOT_GATED)
-		return 1;
-
-	return !(jz_clk_reg_read(JZ_REG_CLOCK_GATE) & clk->gate_bit);
-}
-
-static unsigned long jz_clk_static_get_rate(struct clk *clk)
-{
-	return ((struct static_clk*)clk)->rate;
-}
-
-static int jz_clk_ko_enable(struct clk *clk)
-{
-	jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_KO_ENABLE);
-	return 0;
-}
-
-static int jz_clk_ko_disable(struct clk *clk)
-{
-	jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_KO_ENABLE);
-	return 0;
-}
-
-static int jz_clk_ko_is_enabled(struct clk *clk)
-{
-	return !!(jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_KO_ENABLE);
-}
-
-static const int pllno[] = {1, 2, 2, 4};
-
-static unsigned long jz_clk_pll_get_rate(struct clk *clk)
-{
-	uint32_t val;
-	int m;
-	int n;
-	int od;
-
-	val = jz_clk_reg_read(JZ_REG_CLOCK_PLL);
-
-	if (val & JZ_CLOCK_PLL_BYPASS)
-		return clk_get_rate(clk->parent);
-
-	m = ((val >> 23) & 0x1ff) + 2;
-	n = ((val >> 18) & 0x1f) + 2;
-	od = (val >> 16) & 0x3;
-
-	return clk_get_rate(clk->parent) * (m / n) / pllno[od];
-}
-
-static unsigned long jz_clk_pll_half_get_rate(struct clk *clk)
-{
-	uint32_t reg;
-
-	reg = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
-	if (reg & JZ_CLOCK_CTRL_PLL_HALF)
-		return jz_clk_pll_get_rate(clk->parent);
-	return jz_clk_pll_get_rate(clk->parent) >> 1;
-}
-
-static const int jz_clk_main_divs[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
-static unsigned long jz_clk_main_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = jz_clk_pll_get_rate(clk->parent);
-	int div;
-
-	div = parent_rate / rate;
-	if (div > 32)
-		return parent_rate / 32;
-	else if (div < 1)
-		return parent_rate;
-
-	div &= (0x3 << (ffs(div) - 1));
-
-	return parent_rate / div;
-}
-
-static unsigned long jz_clk_main_get_rate(struct clk *clk) {
-	struct main_clk *mclk = (struct main_clk*)clk;
-	uint32_t div;
-
-	div = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
-
-	div >>= mclk->div_offset;
-	div &= 0xf;
-
-	if (div >= ARRAY_SIZE(jz_clk_main_divs))
-		div = ARRAY_SIZE(jz_clk_main_divs) - 1;
-
-	return jz_clk_pll_get_rate(clk->parent) / jz_clk_main_divs[div];
-}
-
-static int jz_clk_main_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct main_clk *mclk = (struct main_clk*)clk;
-	int i;
-	int div;
-	unsigned long parent_rate = jz_clk_pll_get_rate(clk->parent);
-
-	rate = jz_clk_main_round_rate(clk, rate);
-
-	div = parent_rate / rate;
-
-	i = (ffs(div) - 1) << 1;
-	if (i > 0 && !(div & BIT(i-1)))
-		i -= 1;
-
-	jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, i << mclk->div_offset,
-				0xf << mclk->div_offset);
-
-	return 0;
-}
-
-static struct clk_ops jz_clk_static_ops = {
-	.get_rate = jz_clk_static_get_rate,
-	.enable = jz_clk_enable_gating,
-	.disable = jz_clk_disable_gating,
-	.is_enabled = jz_clk_is_enabled_gating,
-};
-
-static struct static_clk jz_clk_ext = {
-	.clk = {
-		.name = "ext",
-		.gate_bit = JZ4740_CLK_NOT_GATED,
-		.ops = &jz_clk_static_ops,
-	},
-};
-
-static struct clk_ops jz_clk_pll_ops = {
-	.get_rate = jz_clk_static_get_rate,
-};
-
-static struct clk jz_clk_pll = {
-	.name = "pll",
-	.parent = &jz_clk_ext.clk,
-	.ops = &jz_clk_pll_ops,
-};
-
-static struct clk_ops jz_clk_pll_half_ops = {
-	.get_rate = jz_clk_pll_half_get_rate,
-};
-
-static struct clk jz_clk_pll_half = {
-	.name = "pll half",
-	.parent = &jz_clk_pll,
-	.ops = &jz_clk_pll_half_ops,
-};
-
-static const struct clk_ops jz_clk_main_ops = {
-	.get_rate = jz_clk_main_get_rate,
-	.set_rate = jz_clk_main_set_rate,
-	.round_rate = jz_clk_main_round_rate,
-};
-
-static struct main_clk jz_clk_cpu = {
-	.clk = {
-		.name = "cclk",
-		.parent = &jz_clk_pll,
-		.ops = &jz_clk_main_ops,
-	},
-	.div_offset = JZ_CLOCK_CTRL_CDIV_OFFSET,
-};
-
-static struct main_clk jz_clk_memory = {
-	.clk = {
-		.name = "mclk",
-		.parent = &jz_clk_pll,
-		.ops = &jz_clk_main_ops,
-	},
-	.div_offset = JZ_CLOCK_CTRL_MDIV_OFFSET,
-};
-
-static struct main_clk jz_clk_high_speed_peripheral = {
-	.clk = {
-		.name = "hclk",
-		.parent = &jz_clk_pll,
-		.ops = &jz_clk_main_ops,
-	},
-	.div_offset = JZ_CLOCK_CTRL_HDIV_OFFSET,
-};
-
-
-static struct main_clk jz_clk_low_speed_peripheral = {
-	.clk = {
-		.name = "pclk",
-		.parent = &jz_clk_pll,
-		.ops = &jz_clk_main_ops,
-	},
-	.div_offset = JZ_CLOCK_CTRL_PDIV_OFFSET,
-};
-
-static const struct clk_ops jz_clk_ko_ops = {
-	.enable = jz_clk_ko_enable,
-	.disable = jz_clk_ko_disable,
-	.is_enabled = jz_clk_ko_is_enabled,
-};
-
-static struct clk jz_clk_ko = {
-	.name = "cko",
-	.parent = &jz_clk_memory.clk,
-	.ops = &jz_clk_ko_ops,
-};
-
-static int jz_clk_spi_set_parent(struct clk *clk, struct clk *parent)
-{
-	if (parent == &jz_clk_pll)
-		jz_clk_reg_set_bits(JZ_CLOCK_SPI_SRC_PLL, JZ_REG_CLOCK_SPI);
-	else if(parent == &jz_clk_ext.clk)
-		jz_clk_reg_clear_bits(JZ_CLOCK_SPI_SRC_PLL, JZ_REG_CLOCK_SPI);
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	return 0;
-}
-
-static int jz_clk_i2s_set_parent(struct clk *clk, struct clk *parent)
-{
-	if (parent == &jz_clk_pll_half)
-		jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_I2S_SRC_PLL);
-	else if(parent == &jz_clk_ext.clk)
-		jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_I2S_SRC_PLL);
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	return 0;
-}
-
-static int jz_clk_udc_enable(struct clk *clk)
-{
-	jz_clk_reg_set_bits(JZ_REG_CLOCK_SLEEP_CTRL,
-			JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC);
-
-	return 0;
-}
-
-static int jz_clk_udc_disable(struct clk *clk)
-{
-	jz_clk_reg_clear_bits(JZ_REG_CLOCK_SLEEP_CTRL,
-			JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC);
-
-	return 0;
-}
-
-static int jz_clk_udc_is_enabled(struct clk *clk)
-{
-	return !!(jz_clk_reg_read(JZ_REG_CLOCK_SLEEP_CTRL) &
-			JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC);
-}
-static int jz_clk_udc_set_parent(struct clk *clk, struct clk *parent)
-{
-	if (parent == &jz_clk_pll_half)
-		jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_UDC_SRC_PLL);
-	else if(parent == &jz_clk_ext.clk)
-		jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_UDC_SRC_PLL);
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	return 0;
-}
-
-static int jz_clk_udc_set_rate(struct clk *clk, unsigned long rate)
-{
-	int div;
-
-	if (clk->parent == &jz_clk_ext.clk)
-		return -EINVAL;
-
-	div = clk_get_rate(clk->parent) / rate - 1;
-
-	if (div < 0)
-		div = 0;
-	else if (div > 63)
-		div = 63;
-
-	jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, div << JZ_CLOCK_CTRL_UDIV_OFFSET,
-				JZ_CLOCK_CTRL_UDIV_MASK);
-	return 0;
-}
-
-static unsigned long jz_clk_udc_get_rate(struct clk *clk)
-{
-	int div;
-
-	if (clk->parent == &jz_clk_ext.clk)
-		return clk_get_rate(clk->parent);
-
-	div = (jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_UDIV_MASK);
-	div >>= JZ_CLOCK_CTRL_UDIV_OFFSET;
-	div += 1;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static unsigned long jz_clk_divided_get_rate(struct clk *clk)
-{
-	struct divided_clk *dclk = (struct divided_clk*)clk;
-	int div;
-
-	if (clk->parent == &jz_clk_ext.clk)
-		return clk_get_rate(clk->parent);
-
-	div = (jz_clk_reg_read(dclk->reg) & dclk->mask) + 1;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int jz_clk_divided_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct divided_clk *dclk = (struct divided_clk*)clk;
-	int div;
-
-	if (clk->parent == &jz_clk_ext.clk)
-		return -EINVAL;
-
-	div = clk_get_rate(clk->parent) / rate - 1;
-
-	if (div < 0)
-		div = 0;
-	else if(div > dclk->mask)
-		div = dclk->mask;
-
-	jz_clk_reg_write_mask(dclk->reg, div, dclk->mask);
-
-	return 0;
-}
-
-static unsigned long jz_clk_ldclk_round_rate(struct clk *clk, unsigned long rate)
-{
-	int div;
-	unsigned long parent_rate = jz_clk_pll_half_get_rate(clk->parent);
-
-	if (rate > 150000000)
-		return 150000000;
-
-	div = parent_rate / rate;
-	if (div < 1)
-		div = 1;
-	else if(div > 32)
-		div = 32;
-
-	return parent_rate / div;
-}
-
-static int jz_clk_ldclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int div;
-
-	if (rate > 150000000)
-		return -EINVAL;
-
-	div = jz_clk_pll_half_get_rate(clk->parent) / rate - 1;
-	if (div < 0)
-		div = 0;
-	else if(div > 31)
-		div = 31;
-
-	jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, div << JZ_CLOCK_CTRL_LDIV_OFFSET,
-				JZ_CLOCK_CTRL_LDIV_MASK);
-
-	return 0;
-}
-
-static unsigned long jz_clk_ldclk_get_rate(struct clk *clk)
-{
-	int div;
-
-	div = jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_LDIV_MASK;
-	div >>= JZ_CLOCK_CTRL_LDIV_OFFSET;
-
-	return jz_clk_pll_half_get_rate(clk->parent) / (div + 1);
-}
-
-static const struct clk_ops jz_clk_ops_ld = {
-	.set_rate = jz_clk_ldclk_set_rate,
-	.get_rate = jz_clk_ldclk_get_rate,
-	.round_rate = jz_clk_ldclk_round_rate,
-	.enable = jz_clk_enable_gating,
-	.disable = jz_clk_disable_gating,
-	.is_enabled = jz_clk_is_enabled_gating,
-};
-
-static struct clk jz_clk_ld = {
-	.name = "lcd",
-	.gate_bit = JZ_CLOCK_GATE_LCD,
-	.parent = &jz_clk_pll_half,
-	.ops = &jz_clk_ops_ld,
-};
-
-/* TODO: ops!!! */
-static struct clk jz_clk_cim_mclk = {
-	.name = "cim_mclk",
-	.parent = &jz_clk_high_speed_peripheral.clk,
-};
-
-static struct static_clk jz_clk_cim_pclk = {
-	.clk = {
-		.name = "cim_pclk",
-		.gate_bit = JZ_CLOCK_GATE_CIM,
-		.ops = &jz_clk_static_ops,
-	},
-};
-
-static const struct clk_ops jz_clk_i2s_ops = 
-{
-	.set_rate = jz_clk_divided_set_rate,
-	.get_rate = jz_clk_divided_get_rate,
-	.enable = jz_clk_enable_gating,
-	.disable = jz_clk_disable_gating,
-	.is_enabled = jz_clk_is_enabled_gating,
-	.set_parent = jz_clk_i2s_set_parent,
-};
-
-static const struct clk_ops jz_clk_spi_ops = 
-{
-	.set_rate = jz_clk_divided_set_rate,
-	.get_rate = jz_clk_divided_get_rate,
-	.enable = jz_clk_enable_gating,
-	.disable = jz_clk_disable_gating,
-	.is_enabled = jz_clk_is_enabled_gating,
-	.set_parent = jz_clk_spi_set_parent,
-};
-
-static const struct clk_ops jz_clk_divided_ops = 
-{
-	.set_rate = jz_clk_divided_set_rate,
-	.get_rate = jz_clk_divided_get_rate,
-	.enable = jz_clk_enable_gating,
-	.disable = jz_clk_disable_gating,
-	.is_enabled = jz_clk_is_enabled_gating,
-};
-
-static struct divided_clk jz4740_clock_divided_clks[] = {
-	{
-		.clk = {
-			.name = "lcd_pclk",
-			.parent = &jz_clk_pll_half,
-			.gate_bit = JZ4740_CLK_NOT_GATED,
-			.ops = &jz_clk_divided_ops,
-		},
-		.reg = JZ_REG_CLOCK_LCD,
-		.mask = JZ_CLOCK_LCD_DIV_MASK,
-	},
-	{
-		.clk = {
-			.name = "i2s",
-			.parent = &jz_clk_ext.clk,
-			.gate_bit = JZ_CLOCK_GATE_I2S,
-			.ops = &jz_clk_i2s_ops,
-		},
-		.reg = JZ_REG_CLOCK_I2S,
-		.mask = JZ_CLOCK_I2S_DIV_MASK,
-	},
-	{
-		.clk = {
-			.name = "spi",
-			.parent = &jz_clk_ext.clk,
-			.gate_bit = JZ_CLOCK_GATE_SPI,
-			.ops = &jz_clk_spi_ops,
-		},
-		.reg = JZ_REG_CLOCK_SPI,
-		.mask = JZ_CLOCK_SPI_DIV_MASK,
-	},
-	{
-		.clk = {
-			.name = "mmc",
-			.parent = &jz_clk_pll_half,
-			.gate_bit = JZ_CLOCK_GATE_MMC,
-			.ops = &jz_clk_divided_ops,
-		},
-		.reg = JZ_REG_CLOCK_MMC,
-		.mask = JZ_CLOCK_MMC_DIV_MASK,
-	},
-	{
-		.clk = {
-			.name = "uhc",
-			.parent = &jz_clk_pll_half,
-			.gate_bit = JZ_CLOCK_GATE_UHC,
-			.ops = &jz_clk_divided_ops,
-		},
-		.reg = JZ_REG_CLOCK_UHC,
-		.mask = JZ_CLOCK_UHC_DIV_MASK,
-	},
-};
-
-static const struct clk_ops jz_clk_udc_ops = {
-	.set_parent = jz_clk_udc_set_parent,
-	.set_rate = jz_clk_udc_set_rate,
-	.get_rate = jz_clk_udc_get_rate,
-	.enable = jz_clk_udc_enable,
-	.disable = jz_clk_udc_disable,
-	.is_enabled = jz_clk_udc_is_enabled,
-};
-
-static const struct clk_ops jz_clk_simple_ops = {
-	.enable = jz_clk_enable_gating,
-	.disable = jz_clk_disable_gating,
-	.is_enabled = jz_clk_is_enabled_gating,
-};
-
-static struct clk jz4740_clock_simple_clks[] = {
-	{
-		.name = "udc",
-		.parent = &jz_clk_ext.clk,
-		.ops = &jz_clk_udc_ops,
-	},
-	{
-		.name = "uart0",
-		.parent = &jz_clk_ext.clk,
-		.gate_bit = JZ_CLOCK_GATE_UART0,
-		.ops = &jz_clk_simple_ops,
-	},
-	{
-		.name = "uart1",
-		.parent = &jz_clk_ext.clk,
-		.gate_bit = JZ_CLOCK_GATE_UART1,
-		.ops = &jz_clk_simple_ops,
-	},
-	{
-		.name = "dma",
-		.parent = &jz_clk_high_speed_peripheral.clk,
-		.gate_bit = JZ_CLOCK_GATE_UART0,
-		.ops = &jz_clk_simple_ops,
-	},
-	{
-		.name = "ipu",
-		.parent = &jz_clk_high_speed_peripheral.clk,
-		.gate_bit = JZ_CLOCK_GATE_IPU,
-		.ops = &jz_clk_simple_ops,
-	},
-	{
-		.name = "adc",
-		.parent = &jz_clk_ext.clk,
-		.gate_bit = JZ_CLOCK_GATE_ADC,
-		.ops = &jz_clk_simple_ops,
-	},
-	{
-		.name = "i2c",
-		.parent = &jz_clk_ext.clk,
-		.gate_bit = JZ_CLOCK_GATE_I2C,
-		.ops = &jz_clk_simple_ops,
-	},
-	{
-		.name = "aic",
-		.parent = &jz_clk_ext.clk,
-		.gate_bit = JZ_CLOCK_GATE_AIC,
-		.ops = &jz_clk_simple_ops,
-	},
-};
-
-static struct static_clk jz_clk_rtc = {
-	.clk = {
-		.name = "rtc",
-		.gate_bit = JZ_CLOCK_GATE_RTC,
-		.ops = &jz_clk_static_ops,
-	},
-	.rate = 32768,
-};
-
-int clk_enable(struct clk *clk)
-{
-	if (!clk->ops->enable)
-		return -EINVAL;
-
-	return clk->ops->enable(clk);
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	if (clk->ops->disable)
-		clk->ops->disable(clk);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-int clk_is_enabled(struct clk *clk)
-{
-	if (clk->ops->is_enabled)
-		return clk->ops->is_enabled(clk);
-
-	return 1;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk->ops->get_rate)
-		return clk->ops->get_rate(clk);
-	if (clk->parent)
-		return clk_get_rate(clk->parent);
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	if (!clk->ops->set_rate)
-		return -EINVAL;
-	return clk->ops->set_rate(clk, rate);
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk->ops->round_rate)
-		return clk->ops->round_rate(clk, rate);
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret;
-
-	if (!clk->ops->set_parent)
-		return -EINVAL;
-
-	clk_disable(clk);
-	ret = clk->ops->set_parent(clk, parent);
-	clk_enable(clk);
-
-	jz4740_clock_debugfs_update_parent(clk);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-struct clk *clk_get(struct device *dev, const char *name)
-{
-	struct clk *clk;
-
-	list_for_each_entry(clk, &jz_clocks, list) {
-	    if (strcmp(clk->name, name) == 0)
-			return clk;
-	}
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL_GPL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL_GPL(clk_put);
-
-
-inline static void clk_add(struct clk *clk)
-{
-	list_add_tail(&clk->list, &jz_clocks);
-
-	jz4740_clock_debugfs_add_clk(clk);
-}
-
-static void clk_register_clks(void)
-{
-	size_t i;
-
-	clk_add(&jz_clk_ext.clk);
-	clk_add(&jz_clk_pll);
-	clk_add(&jz_clk_pll_half);
-	clk_add(&jz_clk_cpu.clk);
-	clk_add(&jz_clk_high_speed_peripheral.clk);
-	clk_add(&jz_clk_low_speed_peripheral.clk);
-	clk_add(&jz_clk_ko);
-	clk_add(&jz_clk_ld);
-	clk_add(&jz_clk_cim_mclk);
-	clk_add(&jz_clk_cim_pclk.clk);
-	clk_add(&jz_clk_rtc.clk);
-
-	for (i = 0; i < ARRAY_SIZE(jz4740_clock_divided_clks); ++i)
-		clk_add(&jz4740_clock_divided_clks[i].clk);
-
-	for (i = 0; i < ARRAY_SIZE(jz4740_clock_simple_clks); ++i)
-		clk_add(&jz4740_clock_simple_clks[i]);
-}
-
-void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode)
-{
-	switch (mode) {
-	case JZ4740_WAIT_MODE_IDLE:
-		jz_clk_reg_clear_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP);
-		break;
-	case JZ4740_WAIT_MODE_SLEEP:
-		jz_clk_reg_set_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP);
-		break;
-	}
-}
-
-void jz4740_clock_udc_disable_auto_suspend(void)
-{
-	jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, JZ_CLOCK_GATE_UDC);
-}
-EXPORT_SYMBOL_GPL(jz4740_clock_udc_disable_auto_suspend);
-
-void jz4740_clock_udc_enable_auto_suspend(void)
-{
-	jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE, JZ_CLOCK_GATE_UDC);
-}
-EXPORT_SYMBOL_GPL(jz4740_clock_udc_enable_auto_suspend);
-
-void jz4740_clock_suspend(void)
-{
-	jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE,
-		JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0);
-
-	jz_clk_reg_clear_bits(JZ_REG_CLOCK_PLL, JZ_CLOCK_PLL_ENABLED);
-}
-
-void jz4740_clock_resume(void)
-{
-	jz_clk_reg_set_bits(JZ_REG_CLOCK_PLL, JZ_CLOCK_PLL_ENABLED);
-	while ((jz_clk_reg_read(JZ_REG_CLOCK_PLL) & JZ_CLOCK_PLL_STABLE) == 0);
-
-	jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE,
-		JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0);
-}
-
-int jz4740_clock_init(void)
-{
-	uint32_t val;
-
-	jz_clock_base = ioremap(CPHYSADDR(CPM_BASE), 0x100);
-	if (!jz_clock_base)
-		return -EBUSY;
-
-	spin_lock_init(&jz_clock_lock);
-
-	jz_clk_ext.rate = jz4740_clock_bdata.ext_rate;
-	jz_clk_rtc.rate = jz4740_clock_bdata.rtc_rate;
-
-	val = jz_clk_reg_read(JZ_REG_CLOCK_SPI);
-
-	if (val & JZ_CLOCK_SPI_SRC_PLL)
-		jz4740_clock_divided_clks[1].clk.parent = &jz_clk_pll_half;
-
-	val = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
-
-	if (val & JZ_CLOCK_CTRL_I2S_SRC_PLL)
-		jz4740_clock_divided_clks[0].clk.parent = &jz_clk_pll_half;
-
-	if (val & JZ_CLOCK_CTRL_UDC_SRC_PLL)
-		jz4740_clock_simple_clks[0].parent = &jz_clk_pll_half;
-
-	jz4740_clock_debugfs_init();
-
-	clk_register_clks();
-
-	return 0;
-}
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.h b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.h
deleted file mode 100644
index 9c91f0d94..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  	JZ4740 SoC clock support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __JZ4740_CLOCK_H__
-#define __JZ4740_CLOCK_H__
-
-struct jz4740_clock_board_data {
-	unsigned long ext_rate;
-	unsigned long rtc_rate;
-};
-
-extern struct jz4740_clock_board_data jz4740_clock_bdata;
-
-int jz4740_clock_init(void);
-void jz4740_clock_suspend(void);
-void jz4740_clock_resume(void);
-
-struct clk;
-
-struct clk_ops {
-	unsigned long (*get_rate)(struct clk* clk);
-	unsigned long (*round_rate)(struct clk *clk, unsigned long rate);
-	int (*set_rate)(struct clk* clk, unsigned long rate);
-	int (*enable)(struct clk* clk);
-	int (*disable)(struct clk* clk);
-	int (*is_enabled)(struct clk* clk);
-
-	int (*set_parent)(struct clk* clk, struct clk *parent);
-
-};
-
-struct clk {
-	const char *name;
-	struct clk* parent;
-
-	uint32_t gate_bit;
-
-	const struct clk_ops *ops;
-
-	struct list_head list;
-
-#ifdef CONFIG_DEBUG_FS
-	struct dentry *debugfs_entry;
-	struct dentry *debugfs_parent_entry;
-#endif
-
-};
-
-#define JZ4740_CLK_NOT_GATED ((uint32_t)-1)
-
-int clk_is_enabled(struct clk *clk);
-
-#ifdef CONFIG_DEBUG_FS
-void jz4740_clock_debugfs_init(void);
-void jz4740_clock_debugfs_add_clk(struct clk *clk);
-void jz4740_clock_debugfs_update_parent(struct clk *clk);
-#else
-static inline void jz4740_clock_debugfs_init(void) {};
-static inline void jz4740_clock_debugfs_add_clk(struct clk *clk) {};
-static inline void jz4740_clock_debugfs_update_parent(struct clk *clk) {};
-#endif
-
-#endif
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/dma.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/dma.c
deleted file mode 100644
index 43086dd34..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/dma.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  	JZ4740 SoC DMA support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-
-#include <linux/dma-mapping.h>
-#include <asm/mach-jz4740/dma.h>
-#include <asm/mach-jz4740/regs.h>
-
-#define JZ_REG_DMA_SRC_ADDR(x)		(0x00 + (x) * 0x20)
-#define JZ_REG_DMA_DST_ADDR(x)		(0x04 + (x) * 0x20)
-#define JZ_REG_DMA_TRANSFER_COUNT(x)	(0x08 + (x) * 0x20)
-#define JZ_REG_DMA_REQ_TYPE(x)		(0x0C + (x) * 0x20)
-#define JZ_REG_DMA_STATUS_CTRL(x)	(0x10 + (x) * 0x20)
-#define JZ_REG_DMA_CMD(x)		(0x14 + (x) * 0x20)
-#define JZ_REG_DMA_DESC_ADDR(x)		(0x18 + (x) * 0x20)
-
-#define JZ_REG_DMA_CTRL			0x300
-#define JZ_REG_DMA_IRQ			0x304
-#define JZ_REG_DMA_DOORBELL		0x308
-#define JZ_REG_DMA_DOORBELL_SET		0x30C
-
-#define JZ_DMA_STATUS_CTRL_NO_DESC		BIT(31)
-#define JZ_DMA_STATUS_CTRL_DESC_INV		BIT(6)
-#define JZ_DMA_STATUS_CTRL_ADDR_ERR		BIT(4)
-#define JZ_DMA_STATUS_CTRL_TRANSFER_DONE	BIT(3)
-#define JZ_DMA_STATUS_CTRL_HALT			BIT(2)
-#define JZ_DMA_STATUS_CTRL_COUNT_TERMINATE	BIT(1)
-#define JZ_DMA_STATUS_CTRL_ENABLE		BIT(0)
-
-#define JZ_DMA_CMD_SRC_INC			BIT(23)
-#define JZ_DMA_CMD_DST_INC			BIT(22)
-#define JZ_DMA_CMD_RDIL_MASK			(0xf << 16)
-#define JZ_DMA_CMD_SRC_WIDTH_MASK		(0x3 << 14)
-#define JZ_DMA_CMD_DST_WIDTH_MASK		(0x3 << 12)
-#define JZ_DMA_CMD_INTERVAL_LENGTH_MASK		(0x7 << 8)
-#define JZ_DMA_CMD_BLOCK_MODE			BIT(7)
-#define JZ_DMA_CMD_DESC_VALID			BIT(4)
-#define JZ_DMA_CMD_DESC_VALID_MODE		BIT(3)
-#define JZ_DMA_CMD_VALID_IRQ_ENABLE		BIT(2)
-#define JZ_DMA_CMD_TRANSFER_IRQ_ENABLE		BIT(1)
-#define JZ_DMA_CMD_LINK_ENABLE			BIT(0)
-
-#define JZ_DMA_CMD_FLAGS_OFFSET 22
-#define JZ_DMA_CMD_RDIL_OFFSET 16
-#define JZ_DMA_CMD_SRC_WIDTH_OFFSET 14
-#define JZ_DMA_CMD_DST_WIDTH_OFFSET 12
-#define JZ_DMA_CMD_TRANSFER_SIZE_OFFSET 8
-#define JZ_DMA_CMD_MODE_OFFSET 7
-
-#define JZ_DMA_CTRL_PRIORITY_MASK	(0x3 << 8)
-#define JZ_DMA_CTRL_HALT		BIT(3)
-#define JZ_DMA_CTRL_ADDRESS_ERROR	BIT(2)
-#define JZ_DMA_CTRL_ENABLE		BIT(0)
-
-
-static void __iomem *jz4740_dma_base;
-static spinlock_t jz4740_dma_lock;
-
-static inline uint32_t jz4740_dma_read(size_t reg)
-{
-	return readl(jz4740_dma_base + reg);
-}
-
-static inline void jz4740_dma_write(size_t reg, uint32_t val)
-{
-	writel(val, jz4740_dma_base + reg);
-}
-
-static inline void jz4740_dma_write_mask(size_t reg, uint32_t val, uint32_t mask)
-{
-	uint32_t val2;
-	val2 = jz4740_dma_read(reg);
-	val2 &= ~mask;
-	val2 |= val;
-	jz4740_dma_write(reg, val2);
-}
-
-struct jz4740_dma_chan {
-	unsigned int id;
-	void *dev;
-	const char *name;
-
-	enum jz4740_dma_flags flags;
-	uint32_t transfer_shift;
-
-	jz4740_dma_complete_callback_t complete_cb;
-
-	unsigned used:1;
-};
-
-#define JZ4740_DMA_CHANNEL(_id) { .id = _id }
-
-struct jz4740_dma_chan jz4740_dma_channels[] = {
-	JZ4740_DMA_CHANNEL(0),
-	JZ4740_DMA_CHANNEL(1),
-	JZ4740_DMA_CHANNEL(2),
-	JZ4740_DMA_CHANNEL(3),
-	JZ4740_DMA_CHANNEL(4),
-	JZ4740_DMA_CHANNEL(5),
-};
-
-struct jz4740_dma_chan* jz4740_dma_request(void *dev, const char *name)
-{
-	unsigned int i;
-	struct jz4740_dma_chan *dma = NULL;
-
-	spin_lock(&jz4740_dma_lock);
-
-	for (i = 0; i < ARRAY_SIZE(jz4740_dma_channels); ++i) {
-		if (!jz4740_dma_channels[i].used) {
-			dma = &jz4740_dma_channels[i];
-			dma->used = 1;
-			break;
-		}
-	}
-
-	spin_unlock(&jz4740_dma_lock);
-
-	if (!dma)
-		return NULL;
-
-	dma->dev = dev;
-	dma->name = name;
-
-	return dma;
-}
-EXPORT_SYMBOL_GPL(jz4740_dma_request);
-
-void jz4740_dma_configure(struct jz4740_dma_chan *dma,
-                          const struct jz4740_dma_config *config)
-{
-	uint32_t cmd;
-	uint32_t ctrl;
-
-	switch(config->transfer_size) {
-		case JZ4740_DMA_TRANSFER_SIZE_2BYTE:
-			dma->transfer_shift = 1;
-			break;
-		case JZ4740_DMA_TRANSFER_SIZE_4BYTE:
-			dma->transfer_shift = 2;
-			break;
-		case JZ4740_DMA_TRANSFER_SIZE_16BYTE:
-			dma->transfer_shift = 4;
-			break;
-		case JZ4740_DMA_TRANSFER_SIZE_32BYTE:
-			dma->transfer_shift = 5;
-			break;
-		default:
-			dma->transfer_shift = 0;
-			break;
-	}
-
-	cmd = config->flags << JZ_DMA_CMD_FLAGS_OFFSET;
-	cmd |= config->src_width << JZ_DMA_CMD_SRC_WIDTH_OFFSET;
-	cmd |= config->dst_width << JZ_DMA_CMD_DST_WIDTH_OFFSET;
-	cmd |= config->transfer_size << JZ_DMA_CMD_TRANSFER_SIZE_OFFSET;
-	cmd |= config->mode << JZ_DMA_CMD_MODE_OFFSET;
-	cmd |= JZ_DMA_CMD_TRANSFER_IRQ_ENABLE;
-
-	ctrl = JZ_DMA_STATUS_CTRL_NO_DESC;
-	ctrl |= JZ_DMA_STATUS_CTRL_HALT;
-
-	jz4740_dma_write(JZ_REG_DMA_CMD(dma->id), cmd);
-	jz4740_dma_write(JZ_REG_DMA_STATUS_CTRL(dma->id), ctrl);
-	jz4740_dma_write(JZ_REG_DMA_REQ_TYPE(dma->id), config->request_type);
-}
-EXPORT_SYMBOL_GPL(jz4740_dma_configure);
-
-void jz4740_dma_set_src_addr(struct jz4740_dma_chan *dma, dma_addr_t src)
-{
-	jz4740_dma_write(JZ_REG_DMA_SRC_ADDR(dma->id), src);
-}
-EXPORT_SYMBOL_GPL(jz4740_dma_set_src_addr);
-
-void jz4740_dma_set_dst_addr(struct jz4740_dma_chan *dma, dma_addr_t dst)
-{
-	jz4740_dma_write(JZ_REG_DMA_DST_ADDR(dma->id), dst);
-}
-EXPORT_SYMBOL_GPL(jz4740_dma_set_dst_addr);
-
-void jz4740_dma_set_transfer_count(struct jz4740_dma_chan *dma, uint32_t count)
-{
-	count >>= dma->transfer_shift;
-	jz4740_dma_write(JZ_REG_DMA_TRANSFER_COUNT(dma->id), count);
-}
-EXPORT_SYMBOL_GPL(jz4740_dma_set_transfer_count);
-
-void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma,
-                                jz4740_dma_complete_callback_t cb)
-{
-	dma->complete_cb = cb;
-}
-EXPORT_SYMBOL_GPL(jz4740_dma_set_complete_cb);
-
-void jz4740_dma_free(struct jz4740_dma_chan *dma)
-{
-	dma->dev = NULL;
-	dma->complete_cb = NULL;
-	dma->used = 0;
-}
-EXPORT_SYMBOL_GPL(jz4740_dma_free);
-
-void jz4740_dma_enable(struct jz4740_dma_chan *dma)
-{
-	jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id),
-			JZ_DMA_STATUS_CTRL_ENABLE,
-			JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_HALT);
-
-	jz4740_dma_write_mask(JZ_REG_DMA_CTRL,
-			JZ_DMA_CTRL_ENABLE,
-			JZ_DMA_CTRL_ENABLE | JZ_DMA_CTRL_HALT);
-}
-EXPORT_SYMBOL_GPL(jz4740_dma_enable);
-
-void jz4740_dma_disable(struct jz4740_dma_chan *dma)
-{
-	jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
-			JZ_DMA_STATUS_CTRL_ENABLE);
-}
-EXPORT_SYMBOL_GPL(jz4740_dma_disable);
-
-uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma)
-{
-	uint32_t residue;
-	residue = jz4740_dma_read(JZ_REG_DMA_TRANSFER_COUNT(dma->id));
-	return residue << dma->transfer_shift;
-}
-EXPORT_SYMBOL_GPL(jz4740_dma_get_residue);
-
-static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma)
-{
-	uint32_t status;
-
-	status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
-
-	jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
-		JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE);
-
-	if (dma->complete_cb)
-		dma->complete_cb(dma, 0, dma->dev);
-}
-
-static irqreturn_t jz4740_dma_irq(int irq, void *dev_id)
-{
-	uint32_t irq_status;
-	unsigned int i;
-
-	irq_status = readl(jz4740_dma_base + JZ_REG_DMA_IRQ);
-
-	for (i = 0; i < 6; ++i) {
-		if (irq_status & (1 << i))
-			jz4740_dma_chan_irq(&jz4740_dma_channels[i]);
-	}
-
-	return IRQ_HANDLED;
-}
-
-#if 0
-static struct jz4740_dma_config dma_test_config = {
-	.src_width = JZ4740_DMA_WIDTH_32BIT,
-	.dst_width = JZ4740_DMA_WIDTH_32BIT,
-	.transfer_size = JZ4740_DMA_TRANSFER_SIZE_4BYTE,
-	.request_type = JZ4740_DMA_TYPE_AUTO_REQUEST,
-	.flags = JZ4740_DMA_SRC_AUTOINC | JZ4740_DMA_DST_AUTOINC,
-	.mode = JZ4740_DMA_MODE_BLOCK,
-};
-
-static void jz4740_dma_test(void)
-{
-	uint32_t *buf1, *buf2;
-	dma_addr_t addr1, addr2;
-	struct jz4740_dma_chan *dma = jz4740_dma_request(NULL, "dma test");
-	int i;
-
-	printk("STARTING DMA TEST\n");
-
-	buf1 = dma_alloc_coherent(NULL,
-						0x1000,
-						&addr1, GFP_KERNEL);
-	buf2 = dma_alloc_coherent(NULL,
-						0x1000,
-						&addr2, GFP_KERNEL);
-
-	for (i = 0; i < 0x400; ++i)
-		buf1[i] = i;
-
-
-	jz4740_dma_configure(dma, &dma_test_config);
-	jz4740_dma_set_src_addr(dma, addr1);
-	jz4740_dma_set_dst_addr(dma, addr2);
-	jz4740_dma_set_transfer_count(dma, 0x1000);
-
-	jz4740_dma_enable(dma);
-	mdelay(2000);
-
-	for (i = 0; i < 0x400; ++i) {
-		if (buf2[i] != i)
-			printk("OH MY GOD: %x %x\n", i, buf2[i]);
-	}
-
-	printk("DMA TEST DONE\n");
-}
-#endif
-
-static int jz4740_dma_init(void)
-{
-	unsigned int ret;
-
-	jz4740_dma_base = ioremap(CPHYSADDR(DMAC_BASE), 0x400);
-
-	if (!jz4740_dma_base)
-		return -EBUSY;
-
-	spin_lock_init(&jz4740_dma_lock);
-
-	ret = request_irq(JZ_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL);
-
-	if (ret)
-		printk("JZ4740 DMA: Failed to request irq: %d\n", ret);
-
-	return ret;
-}
-arch_initcall(jz4740_dma_init);
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/gpio.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/gpio.c
deleted file mode 100644
index 8a99f4d37..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/gpio.c
+++ /dev/null
@@ -1,540 +0,0 @@
-/*
- *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
- *  	JZ4740 platform GPIO support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/spinlock.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-#define JZ_GPIO_BASE_A (32*0)
-#define JZ_GPIO_BASE_B (32*1)
-#define JZ_GPIO_BASE_C (32*2)
-#define JZ_GPIO_BASE_D (32*3)
-
-#define JZ_GPIO_NUM_A 32
-#define JZ_GPIO_NUM_B 32
-#define JZ_GPIO_NUM_C 31
-#define JZ_GPIO_NUM_D 32
-
-#define JZ_IRQ_GPIO_BASE_A (JZ_IRQ_GPIO(0) + JZ_GPIO_BASE_A)
-#define JZ_IRQ_GPIO_BASE_B (JZ_IRQ_GPIO(0) + JZ_GPIO_BASE_B)
-#define JZ_IRQ_GPIO_BASE_C (JZ_IRQ_GPIO(0) + JZ_GPIO_BASE_C)
-#define JZ_IRQ_GPIO_BASE_D (JZ_IRQ_GPIO(0) + JZ_GPIO_BASE_D)
-
-#define JZ_IRQ_GPIO_A(num) (JZ_IRQ_GPIO_BASE_A + num)
-#define JZ_IRQ_GPIO_B(num) (JZ_IRQ_GPIO_BASE_B + num)
-#define JZ_IRQ_GPIO_C(num) (JZ_IRQ_GPIO_BASE_C + num)
-#define JZ_IRQ_GPIO_D(num) (JZ_IRQ_GPIO_BASE_D + num)
-
-#define JZ_REG_GPIO_PIN			0x00
-#define JZ_REG_GPIO_DATA		0x10
-#define JZ_REG_GPIO_DATA_SET		0x14
-#define JZ_REG_GPIO_DATA_CLEAR		0x18
-#define JZ_REG_GPIO_MASK		0x20
-#define JZ_REG_GPIO_MASK_SET		0x24
-#define JZ_REG_GPIO_MASK_CLEAR		0x28
-#define JZ_REG_GPIO_PULL		0x30
-#define JZ_REG_GPIO_PULL_SET		0x34
-#define JZ_REG_GPIO_PULL_CLEAR		0x38
-#define JZ_REG_GPIO_FUNC		0x40
-#define JZ_REG_GPIO_FUNC_SET		0x44
-#define JZ_REG_GPIO_FUNC_CLEAR		0x48
-#define JZ_REG_GPIO_SELECT		0x50
-#define JZ_REG_GPIO_SELECT_SET		0x54
-#define JZ_REG_GPIO_SELECT_CLEAR	0x58
-#define JZ_REG_GPIO_DIRECTION		0x60
-#define JZ_REG_GPIO_DIRECTION_SET	0x64
-#define JZ_REG_GPIO_DIRECTION_CLEAR	0x68
-#define JZ_REG_GPIO_TRIGGER		0x70
-#define JZ_REG_GPIO_TRIGGER_SET		0x74
-#define JZ_REG_GPIO_TRIGGER_CLEAR	0x78
-#define JZ_REG_GPIO_FLAG		0x80
-#define JZ_REG_GPIO_FLAG_CLEAR		0x14
-
-#define CHIP_TO_REG(chip, reg) (jz_gpio_base + (((chip)->base) << 3) + reg)
-
-#define GPIO_TO_BIT(gpio) BIT(gpio & 0x1f)
-#define GPIO_TO_REG(gpio, reg) (jz_gpio_base + ((gpio >> 5) << 8) + reg)
-
-static void __iomem *jz_gpio_base;
-
-struct jz_gpio_chip {
-	unsigned int irq;
-	unsigned int irq_base;
-	uint32_t wakeup;
-	uint32_t suspend_mask;
-	uint32_t edge_trigger_both;
-	spinlock_t lock;
-	struct gpio_chip gpio_chip;
-	struct irq_chip irq_chip;
-};
-
-static struct jz_gpio_chip *jz_irq_to_chip(unsigned int irq)
-{
-	return get_irq_chip_data(irq);
-}
-
-static inline void jz_gpio_write_bit(unsigned int gpio, unsigned int reg)
-{
-	writel(GPIO_TO_BIT(gpio), GPIO_TO_REG(gpio, reg));
-}
-
-int jz_gpio_set_function(int gpio, enum jz_gpio_function function)
-{
-	if (function == JZ_GPIO_FUNC_NONE) {
-		jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_CLEAR);
-		jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR);
-		jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR);
-	} else {
-		jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_SET);
-		jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR);
-		switch (function) {
-		case JZ_GPIO_FUNC1:
-			jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR);
-			break;
-		case JZ_GPIO_FUNC3:
-			jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_SET);
-		case JZ_GPIO_FUNC2: /* Falltrough */
-			jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_SET);
-			break;
-		default:
-			BUG();
-			break;
-		}
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(jz_gpio_set_function);
-
-int jz_gpio_bulk_request(const struct jz_gpio_bulk_request *request, size_t num)
-{
-	size_t i;
-	int ret;
-
-	for (i = 0; i < num; ++i, ++request) {
-		ret = gpio_request(request->gpio, request->name);
-		if (ret)
-			goto err;
-		jz_gpio_set_function(request->gpio, request->function);
-	}
-
-	return 0;
-err:
-	for (--request; i > 0; --i, --request)
-		gpio_free(request->gpio);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(jz_gpio_bulk_request);
-
-void jz_gpio_bulk_free(const struct jz_gpio_bulk_request *request, size_t num)
-{
-	size_t i;
-
-	for (i = 0; i < num; ++i, ++request) {
-		gpio_free(request->gpio);
-		jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE);
-	}
-
-}
-EXPORT_SYMBOL_GPL(jz_gpio_bulk_free);
-
-void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num)
-{
-	size_t i;
-
-	for (i = 0; i < num; ++i, ++request) {
-		jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE);
-		jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_DIRECTION_CLEAR);
-		jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_PULL_SET);
-	}
-}
-EXPORT_SYMBOL_GPL(jz_gpio_bulk_suspend);
-
-void jz_gpio_bulk_resume(const struct jz_gpio_bulk_request *request, size_t num)
-{
-	size_t i;
-
-	for (i = 0; i < num; ++i, ++request) {
-		jz_gpio_set_function(request->gpio, request->function);
-	}
-}
-EXPORT_SYMBOL_GPL(jz_gpio_bulk_resume);
-
-void jz_gpio_enable_pullup(unsigned gpio)
-{
-	jz_gpio_write_bit(gpio, JZ_REG_GPIO_PULL_CLEAR);
-}
-EXPORT_SYMBOL_GPL(jz_gpio_enable_pullup);
-
-void jz_gpio_disable_pullup(unsigned gpio)
-{
-	jz_gpio_write_bit(gpio, JZ_REG_GPIO_PULL_SET);
-}
-EXPORT_SYMBOL_GPL(jz_gpio_disable_pullup);
-
-static int jz_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
-	return !!(readl(CHIP_TO_REG(chip, JZ_REG_GPIO_PIN)) & BIT(gpio));
-}
-
-static void jz_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
-{
-	uint32_t __iomem *reg = CHIP_TO_REG(chip, JZ_REG_GPIO_DATA_SET);
-	reg += !value;
-	writel(BIT(gpio), reg);
-}
-
-static int jz_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
-{
-	writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_SET));
-	jz_gpio_set_value(chip, gpio, value);
-
-	return 0;
-}
-
-static int jz_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_CLEAR));
-
-	return 0;
-}
-
-int jz_gpio_port_direction_input(int port, uint32_t mask)
-{
-	writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_CLEAR));
-
-	return 0;
-}
-EXPORT_SYMBOL(jz_gpio_port_direction_input);
-
-int jz_gpio_port_direction_output(int port, uint32_t mask)
-{
-	writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_SET));
-
-	return 0;
-}
-EXPORT_SYMBOL(jz_gpio_port_direction_output);
-
-void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask)
-{
-	writel((~value) & mask, GPIO_TO_REG(port, JZ_REG_GPIO_DATA_CLEAR));
-	writel(value & mask, GPIO_TO_REG(port, JZ_REG_GPIO_DATA_SET));
-}
-EXPORT_SYMBOL(jz_gpio_port_set_value);
-
-uint32_t jz_gpio_port_get_value(int port, uint32_t mask)
-{
-	uint32_t value = readl(GPIO_TO_REG(port, JZ_REG_GPIO_PIN));
-
-	return value & mask;
-}
-EXPORT_SYMBOL(jz_gpio_port_get_value);
-
-
-#define IRQ_TO_GPIO(irq) (irq - JZ_IRQ_GPIO(0))
-#define IRQ_TO_BIT(irq) BIT(IRQ_TO_GPIO(irq) & 0x1f)
-
-#define IRQ_TO_REG(irq, reg)  GPIO_TO_REG(IRQ_TO_GPIO(irq), reg)
-
-static void jz_gpio_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
-{
-	uint32_t flag;
-	unsigned int gpio_irq;
-	unsigned int gpio_bank;
-	struct jz_gpio_chip *chip = get_irq_desc_data(desc);
-
-	gpio_bank = JZ_IRQ_GPIO0 - irq;
-
-	flag = readl(jz_gpio_base + (gpio_bank << 8) + JZ_REG_GPIO_FLAG);
-
-	gpio_irq = ffs(flag) - 1;
-
-	if (chip->edge_trigger_both & BIT(gpio_irq)) {
-		uint32_t value = readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_PIN));
-		if (value & BIT(gpio_irq)) {
-			writel(BIT(gpio_irq),
-				CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_DIRECTION_CLEAR));
-		} else {
-			writel(BIT(gpio_irq),
-				CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_DIRECTION_SET));
-		}
-	}
-
-	gpio_irq += (gpio_bank << 5) + JZ_IRQ_GPIO(0);
-
-	generic_handle_irq(gpio_irq);
-};
-
-static inline void jz_gpio_set_irq_bit(unsigned int irq, unsigned int reg)
-{
-	writel(IRQ_TO_BIT(irq), IRQ_TO_REG(irq, reg));
-}
-
-static void jz_gpio_irq_mask(unsigned int irq)
-{
-	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_MASK_SET);
-};
-
-static void jz_gpio_irq_unmask(unsigned int irq)
-{
-	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_MASK_CLEAR);
-};
-
-
-/* TODO: Check if function is gpio */
-static unsigned int jz_gpio_irq_startup(unsigned int irq)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_SELECT_SET);
-
-	desc->status &= ~IRQ_MASKED;
-	jz_gpio_irq_unmask(irq);
-
-	return 0;
-}
-
-static void jz_gpio_irq_shutdown(unsigned int irq)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	jz_gpio_irq_mask(irq);
-	desc->status |= IRQ_MASKED;
-
-	/* Set direction to input */
-	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_CLEAR);
-	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_SELECT_CLEAR);
-}
-
-static void jz_gpio_irq_ack(unsigned int irq)
-{
-	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_FLAG_CLEAR);
-};
-
-static int jz_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
-{
-	struct jz_gpio_chip *chip = jz_irq_to_chip(irq);
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	jz_gpio_irq_mask(irq);
-
-	if (flow_type == IRQ_TYPE_EDGE_BOTH) {
-		uint32_t value = readl(IRQ_TO_REG(irq, JZ_REG_GPIO_PIN));
-		if (value & IRQ_TO_BIT(irq))
-			flow_type = IRQ_TYPE_EDGE_FALLING;
-		else
-			flow_type = IRQ_TYPE_EDGE_RISING;
-		chip->edge_trigger_both |= IRQ_TO_BIT(irq);
-	} else {
-		chip->edge_trigger_both &= ~IRQ_TO_BIT(irq);
-	}
-
-	switch(flow_type) {
-	case IRQ_TYPE_EDGE_RISING:
-		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_SET);
-		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_SET);
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_CLEAR);
-		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_SET);
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_SET);
-		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_CLEAR);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_CLEAR);
-		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_CLEAR);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (!(desc->status & IRQ_MASKED))
-		jz_gpio_irq_unmask(irq);
-
-	return 0;
-}
-
-static int jz_gpio_irq_set_wake(unsigned int irq, unsigned int on)
-{
-	struct jz_gpio_chip *chip = jz_irq_to_chip(irq);
-	spin_lock(&chip->lock);
-	if (on)
-		chip->wakeup |= IRQ_TO_BIT(irq);
-	else
-		chip->wakeup &= ~IRQ_TO_BIT(irq);
-	spin_unlock(&chip->lock);
-
-	set_irq_wake(chip->irq, !!(chip->wakeup));
-	return 0;
-}
-
-int gpio_to_irq(unsigned gpio)
-{
-	return JZ_IRQ_GPIO(0) + gpio;
-}
-EXPORT_SYMBOL_GPL(gpio_to_irq);
-
-int irq_to_gpio(unsigned gpio)
-{
-	return IRQ_TO_GPIO(gpio);
-}
-EXPORT_SYMBOL_GPL(irq_to_gpio);
-
-#define JZ_GPIO_CHIP(_bank) { \
-	.irq_base = JZ_IRQ_GPIO_BASE_ ## _bank, \
-	.gpio_chip = { \
-		.label = "Bank " # _bank, \
-		.owner = THIS_MODULE, \
-		.set = jz_gpio_set_value, \
-		.get = jz_gpio_get_value, \
-		.direction_output = jz_gpio_direction_output, \
-		.direction_input = jz_gpio_direction_input, \
-		.base = JZ_GPIO_BASE_ ## _bank, \
-		.ngpio = JZ_GPIO_NUM_ ## _bank, \
-	}, \
-	.irq_chip =  { \
-		.name = "GPIO Bank " # _bank, \
-		.mask = jz_gpio_irq_mask, \
-		.unmask = jz_gpio_irq_unmask, \
-		.ack = jz_gpio_irq_ack, \
-		.startup = jz_gpio_irq_startup, \
-		.shutdown = jz_gpio_irq_shutdown, \
-		.set_type = jz_gpio_irq_set_type, \
-		.set_wake = jz_gpio_irq_set_wake, \
-	}, \
-}
-
-static struct jz_gpio_chip jz_gpio_chips[] = {
-	JZ_GPIO_CHIP(A),
-	JZ_GPIO_CHIP(B),
-	JZ_GPIO_CHIP(C),
-	JZ_GPIO_CHIP(D),
-};
-
-int jz_gpio_suspend(void)
-{
-	struct jz_gpio_chip *chip = jz_gpio_chips;
-	int i, gpio;
-
-	for (i = 0; i < ARRAY_SIZE(jz_gpio_chips); ++i, ++chip) {
-		gpio = chip->gpio_chip.base;
-		chip->suspend_mask = readl(GPIO_TO_REG(gpio, JZ_REG_GPIO_MASK));
-		writel(~(chip->wakeup), GPIO_TO_REG(gpio, JZ_REG_GPIO_MASK_SET));
-		writel(chip->wakeup, GPIO_TO_REG(gpio, JZ_REG_GPIO_MASK_CLEAR));
-	}
-
-	chip = jz_gpio_chips;
-
-	return 0;
-}
-
-int jz_gpio_resume(void)
-{
-	struct jz_gpio_chip *chip = jz_gpio_chips;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(jz_gpio_chips); ++i, ++chip) {
-		writel(~(chip->suspend_mask), GPIO_TO_REG(chip->gpio_chip.base,
-			JZ_REG_GPIO_MASK_CLEAR));
-		writel(chip->suspend_mask, GPIO_TO_REG(chip->gpio_chip.base,
-			JZ_REG_GPIO_MASK_SET));
-	}
-
-	return 0;
-}
-
-int __init jz_gpiolib_init(void)
-{
-	struct jz_gpio_chip *chip = jz_gpio_chips;
-	int i, irq;
-
-	jz_gpio_base = ioremap(0x10010000, 0x400);
-
-	for (i = 0; i < ARRAY_SIZE(jz_gpio_chips); ++i, ++chip) {
-		gpiochip_add(&chip->gpio_chip);
-		spin_lock_init(&chip->lock);
-		chip->irq = JZ_IRQ_INTC_GPIO(i);
-		set_irq_data(chip->irq, chip);
-		set_irq_chained_handler(chip->irq, jz_gpio_irq_demux_handler);
-		for (irq = chip->irq_base; irq < chip->irq_base + chip->gpio_chip.ngpio; ++irq) {
-			set_irq_chip_and_handler(irq, &chip->irq_chip, handle_level_irq);
-			set_irq_chip_data(irq, chip);
-		}
-	}
-
-	printk("JZ GPIO initalized\n");
-
-	return 0;
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-static int gpio_regs_show(struct seq_file *s, void *unused)
-{
-	struct jz_gpio_chip *chip = jz_gpio_chips;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(jz_gpio_chips); ++i, ++chip) {
-		seq_printf(s, "GPIO %d: \n", i);
-		seq_printf(s, "\tPin: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_PIN)));
-		seq_printf(s, "\tData: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_DATA)));
-		seq_printf(s, "\tMask: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_MASK)));
-		seq_printf(s, "\tData: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_DATA)));
-		seq_printf(s, "\tPull: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_PULL)));
-		seq_printf(s, "\tFunc: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_FUNC)));
-		seq_printf(s, "\tSelect: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_SELECT)));
-		seq_printf(s, "\tDirection: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_DIRECTION)));
-		seq_printf(s, "\tTrigger: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_TRIGGER)));
-		seq_printf(s, "\tFlag: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_FLAG)));
-	}
-
-	return 0;
-}
-
-static int gpio_regs_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, gpio_regs_show, NULL);
-}
-
-static const struct file_operations gpio_regs_operations = {
-	.open		= gpio_regs_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init gpio_debugfs_init(void)
-{
-	(void) debugfs_create_file("jz_regs_gpio", S_IFREG | S_IRUGO,
-				NULL, NULL, &gpio_regs_operations);
-	return 0;
-}
-subsys_initcall(gpio_debugfs_init);
-
-#endif
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/irq.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/irq.c
deleted file mode 100644
index 5555026d1..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/irq.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
- *  	JZ4740 platform IRQ support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/irq_cpu.h>
-
-static void __iomem *jz_intc_base;
-static uint32_t jz_intc_wakeup;
-static uint32_t jz_intc_saved;
-
-#define JZ_REG_BASE_INTC 0x10001000
-
-#define JZ_REG_INTC_STATUS	0x00
-#define JZ_REG_INTC_MASK	0x04
-#define JZ_REG_INTC_SET_MASK	0x08
-#define JZ_REG_INTC_CLEAR_MASK	0x0c
-#define JZ_REG_INTC_PENDING	0x10
-
-#define IRQ_BIT(x) BIT((x) - JZ_IRQ_BASE)
-
-static void intc_irq_unmask(unsigned int irq)
-{
-	writel(IRQ_BIT(irq), jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-}
-
-static void intc_irq_mask(unsigned int irq)
-{
-	writel(IRQ_BIT(irq), jz_intc_base + JZ_REG_INTC_SET_MASK);
-}
-
-static void intc_irq_ack(unsigned int irq)
-{
-	writel(IRQ_BIT(irq), jz_intc_base + JZ_REG_INTC_PENDING);
-}
-
-static int intc_irq_set_wake(unsigned int irq, unsigned int on)
-{
-	if (on)
-		jz_intc_wakeup |= IRQ_BIT(irq);
-	else
-		jz_intc_wakeup &= ~IRQ_BIT(irq);
-
-	return 0;
-}
-
-static struct irq_chip intc_irq_type = {
-	.name =		"INTC",
-	.mask =		intc_irq_mask,
-	.unmask =	intc_irq_unmask,
-	.ack =		intc_irq_ack,
-	.set_wake =	intc_irq_set_wake,
-};
-
-static irqreturn_t jz4740_cascade(int irq, void *data)
-{
-	uint32_t irq_reg;
-
-	irq_reg = readl(jz_intc_base + JZ_REG_INTC_PENDING);
-	generic_handle_irq(ffs(irq_reg) - 1 + JZ_IRQ_BASE);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction jz4740_cascade_action = {
-	.handler = jz4740_cascade,
-	.name = "JZ4740 cascade interrupt",
-	.flags = IRQF_DISABLED,
-};
-
-void __init arch_init_irq(void)
-{
-	int i;
-	mips_cpu_irq_init();
-
-	jz_intc_base = ioremap(JZ_REG_BASE_INTC, 0x14);
-
-	for (i = JZ_IRQ_BASE; i < JZ_IRQ_BASE + 32; i++) {
-		intc_irq_mask(i);
-		set_irq_chip_and_handler(i, &intc_irq_type, handle_level_irq);
-	}
-
-	setup_irq(2, &jz4740_cascade_action);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-	if (pending & STATUSF_IP2)
-		do_IRQ(2);
-	else if(pending & STATUSF_IP3)
-		do_IRQ(3);
-	else
-		spurious_interrupt();
-}
-
-/* TODO: Use sysdev */
-void jz4740_intc_suspend(void)
-{
-	jz_intc_saved = readl(jz_intc_base + JZ_REG_INTC_MASK);
-	writel(~jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_SET_MASK);
-	writel(jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-}
-
-void jz4740_intc_resume(void)
-{
-	writel(~jz_intc_saved, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-	writel(jz_intc_saved, jz_intc_base + JZ_REG_INTC_SET_MASK);
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-static int intc_regs_show(struct seq_file *s, void *unused)
-{
-	seq_printf(s, "Status:\t\t%08x\n", readl(jz_intc_base + JZ_REG_INTC_STATUS));
-	seq_printf(s, "Mask\t\t%08x\n", readl(jz_intc_base + JZ_REG_INTC_MASK));
-	seq_printf(s, "Pending:\t%08x\n", readl(jz_intc_base + JZ_REG_INTC_PENDING));
-
-	return 0;
-}
-
-static int intc_regs_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, intc_regs_show, NULL);
-}
-
-static const struct file_operations intc_regs_operations = {
-	.open		= intc_regs_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init intc_debugfs_init(void)
-{
-	(void) debugfs_create_file("jz_regs_intc", S_IFREG | S_IRUGO,
-				NULL, NULL, &intc_regs_operations);
-	return 0;
-}
-subsys_initcall(intc_debugfs_init);
-
-#endif
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/platform.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/platform.c
deleted file mode 100644
index ec34ea257..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/platform.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
- *  	JZ4740 platform devices
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/resource.h>
-
-#include <asm/mach-jz4740/platform.h>
-#include <asm/mach-jz4740/regs.h>
-#include <asm/mach-jz4740/irq.h>
-
-/* OHCI (USB full speed host controller) */
-static struct resource jz4740_usb_ohci_resources[] = {
-	[0] = {
-		.start	= CPHYSADDR(UHC_BASE),
-		.end	= CPHYSADDR(UHC_BASE) + 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= JZ_IRQ_UHC,
-		.end	= JZ_IRQ_UHC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
-
-struct platform_device jz4740_usb_ohci_device = {
-	.name		= "jz-ohci",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(jz4740_usb_ohci_resources),
-	.resource	= jz4740_usb_ohci_resources,
-};
-
-/* UDC (USB gadget controller) */
-static struct resource jz4740_usb_gdt_resources[] = {
-	[0] = {
-		.start	= CPHYSADDR(UDC_BASE),
-		.end	= CPHYSADDR(UDC_BASE) + 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= JZ_IRQ_UDC,
-		.end	= JZ_IRQ_UDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 jz4740_udc_dmamask = ~(u32)0;
-
-struct platform_device jz4740_usb_gdt_device = {
-	.name		= "jz-udc",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &jz4740_udc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(jz4740_usb_gdt_resources),
-	.resource	= jz4740_usb_gdt_resources,
-};
-
-/** MMC/SD controller **/
-static struct resource jz4740_mmc_resources[] = {
-	[0] = {
-		.start	= CPHYSADDR(MSC_BASE),
-		.end	= CPHYSADDR(MSC_BASE) + 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= JZ_IRQ_MSC,
-		.end	= JZ_IRQ_MSC,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 jz4740_mmc_dmamask =  ~(u32)0;
-
-struct platform_device jz4740_mmc_device = {
-	.name = "jz4740-mmc",
-	.id = 0,
-	.dev = {
-		.dma_mask		= &jz4740_mmc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(jz4740_mmc_resources),
-	.resource	= jz4740_mmc_resources,
-};
-
-static struct resource jz4740_rtc_resources[] = {
-	[0] = {
-		.start	= CPHYSADDR(RTC_BASE),
-		.end	= CPHYSADDR(RTC_BASE) + 0x38 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = JZ_IRQ_RTC,
-		.end	= JZ_IRQ_RTC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device jz4740_rtc_device = {
-	.name	= "jz4740-rtc",
-	.id	= -1,
-	.num_resources	= ARRAY_SIZE(jz4740_rtc_resources),
-	.resource	= jz4740_rtc_resources,
-};
-
-/** I2C controller **/
-static struct resource jz4740_i2c_resources[] = {
-	[0] = {
-		.start	= CPHYSADDR(I2C_BASE),
-		.end	= CPHYSADDR(I2C_BASE) + 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= JZ_IRQ_I2C,
-		.end	= JZ_IRQ_I2C,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 jz4740_i2c_dmamask =  ~(u32)0;
-
-struct platform_device jz4740_i2c_device = {
-	.name = "jz_i2c",
-	.id = 0,
-	.dev = {
-		.dma_mask		= &jz4740_i2c_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(jz4740_i2c_resources),
-	.resource	= jz4740_i2c_resources,
-};
-
-static struct resource jz4740_nand_resources[] = {
-	[0] = {
-		.start	= CPHYSADDR(EMC_BASE),
-		.end	= CPHYSADDR(EMC_BASE) + 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device jz4740_nand_device = {
-	.name = "jz4740-nand",
-	.num_resources = ARRAY_SIZE(jz4740_nand_resources),
-	.resource = jz4740_nand_resources,
-};
-
-static struct resource jz4740_framebuffer_resources[] = {
-	[0] = {
-		.start	= CPHYSADDR(LCD_BASE),
-		.end	= CPHYSADDR(LCD_BASE) + 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static u64 jz4740_fb_dmamask = ~(u32)0;
-
-struct platform_device jz4740_framebuffer_device = {
-	.name = "jz4740-fb",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(jz4740_framebuffer_resources),
-	.resource = jz4740_framebuffer_resources,
-	.dev = {
-		.dma_mask = &jz4740_fb_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static struct resource jz4740_i2s_resources[] = {
-	[0] = {
-		.start	= CPHYSADDR(AIC_BASE),
-		.end	= CPHYSADDR(AIC_BASE) + 0x38 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device jz4740_i2s_device = {
-	.name = "jz4740-i2s",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(jz4740_i2s_resources),
-	.resource = jz4740_i2s_resources,
-};
-
-static struct resource jz4740_codec_resources[] = {
-	[0] = {
-		.start	= CPHYSADDR(AIC_BASE) + 0x80,
-		.end	= CPHYSADDR(AIC_BASE) + 0x88 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device jz4740_codec_device = {
-	.name		= "jz4740-codec",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(jz4740_codec_resources),
-	.resource	= jz4740_codec_resources,
-};
-
-static struct resource jz4740_adc_resources[] = {
-	[0] = {
-		.start	= CPHYSADDR(SADC_BASE),
-		.end	= CPHYSADDR(SADC_BASE) + 0x30,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= JZ_IRQ_SADC,
-		.end	= JZ_IRQ_SADC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device jz4740_adc_device = {
-	.name		= "jz4740-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(jz4740_adc_resources),
-	.resource	= jz4740_adc_resources,
-};
-
-struct platform_device jz4740_battery_device = {
-	.name = "jz4740-battery",
-	.id = -1,
-	.dev = {
-		.parent	= &jz4740_adc_device.dev
-	},
-};
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/pm.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/pm.c
deleted file mode 100644
index e7e463ef3..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/pm.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  	JZ4740 SoC power management support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
-#include <asm/mach-jz4740/regs.h>
-#include <asm/mach-jz4740/clock.h>
-
-#include "clock.h"
-
-extern void jz4740_intc_suspend(void);
-extern void jz4740_intc_resume(void);
-extern void jz_gpio_suspend(void);
-extern void jz_gpio_resume(void);
-
-static int jz_pm_enter(suspend_state_t state)
-{
-	jz_gpio_suspend();
-	jz4740_intc_suspend();
-	jz4740_clock_suspend();
-
-	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP);
-
-	__asm__(".set\tmips3\n\t"
-		"wait\n\t"
-		".set\tmips0");
-
-	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE);
-
-	jz4740_clock_resume();
-	jz4740_intc_resume();
-	jz_gpio_resume();
-
-	return 0;
-}
-
-static struct platform_suspend_ops jz_pm_ops = {
-	.valid		= suspend_valid_only_mem,
-	.enter		= jz_pm_enter,
-};
-
-/*
- * Initialize power interface
- */
-int __init jz_pm_init(void)
-{
-	suspend_set_ops(&jz_pm_ops);
-	return 0;
-
-}
-late_initcall(jz_pm_init);
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/prom.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/prom.c
deleted file mode 100644
index e28d8154c..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/prom.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *    PROM library initialisation code, supports YAMON and U-Boot.
- *
- * Copyright 2000, 2001, 2006 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/xx files.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-jz4740/regs.h>
-
-/* #define DEBUG_CMDLINE */
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-
-char *prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
-void prom_init_cmdline(void)
-{
-	char *cp, *c;
-	size_t i = 1;
-
-	cp = &(arcs_cmdline[0]);
-	while(i < prom_argc) {
-		c = prom_argv[i];
-		while (*c) {
-			*cp++ = *c++;
-		}
-		*cp++ = ' ';
-		i++;
-	}
-	if (i > 1) {
-		*(cp - 1) = '\0';
-	}
-
-}
-
-void __init prom_init(void)
-{
-	unsigned long memsize;
-
-	prom_argc = (int) fw_arg0;
-	prom_argv = (char **) fw_arg1;
-	prom_envp = (char **) fw_arg2;
-
-	mips_machtype = MACH_INGENIC_JZ4740;
-
-	prom_init_cmdline();
-	memsize = 0x04000000;
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-/* used by early printk */
-void prom_putchar(char c)
-{
-	volatile u8 *uart_lsr = (volatile u8 *)(UART0_BASE + OFF_LSR);
-	volatile u8 *uart_tdr = (volatile u8 *)(UART0_BASE + OFF_TDR);
-
-	/* Wait for fifo to shift out some bytes */
-	while ( !((*uart_lsr & (UARTLSR_TDRQ | UARTLSR_TEMT)) == 0x60) );
-
-	*uart_tdr = (u8)c;
-}
-
-const char *get_system_type(void)
-{
-	return "JZ4740";
-}
-
-EXPORT_SYMBOL(prom_getcmdline);
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/reset.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/reset.c
deleted file mode 100644
index e4fd522b8..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/reset.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * linux/arch/mips/jz4740/reset.c
- *
- * JZ4740 reset routines.
- *
- * Copyright (c) 2006-2007  Ingenic Semiconductor Inc.
- * Author: <yliu@ingenic.cn>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/mach-jz4740/regs.h>
-#include <asm/mach-jz4740/timer.h>
-#include <asm/mach-jz4740/jz4740.h>
-
-#include "clock.h"
-
-void jz_restart(char *command)
-{
-	printk(KERN_NOTICE "Restarting after 4 ms\n");
-	REG_WDT_TCSR = WDT_TCSR_PRESCALE4 | WDT_TCSR_EXT_EN;
-	REG_WDT_TCNT = 0;
-	REG_WDT_TDR = jz4740_clock_bdata.ext_rate / 1000;   /* reset after 4ms */
-	jz4740_timer_enable_watchdog();
-	REG_WDT_TCER = WDT_TCER_TCEN;  /* wdt start */
-	while (1);
-}
-
-void jz_halt(void)
-{
-	/* Put CPU to power down mode */
-	while (!(REG_RTC_RCR & RTC_RCR_WRDY));
-	REG_RTC_HCR = RTC_HCR_PD;
-
-	while (1)
-		__asm__(".set\tmips3\n\t"
-	                "wait\n\t"
-			".set\tmips0");
-}
-
-void jz_power_off(void)
-{
-	jz_halt();
-}
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/setup.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/setup.c
deleted file mode 100644
index f475ff6dd..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/setup.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * linux/arch/mips/jz4740/common/setup.c
- * 
- * JZ4740 common setup routines.
- * 
- * Copyright (C) 2006 Ingenic Semiconductor Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
-#include <asm/mach-jz4740/jz4740.h>
-#include <asm/mach-jz4740/regs.h>
-#include <asm/mach-jz4740/clock.h>
-#include <asm/mach-jz4740/serial.h>
-
-#include "clock.h"
-
-extern char *__init prom_getcmdline(void);
-extern void jz_restart(char *);
-extern void jz_halt(void);
-extern void jz_power_off(void);
-
-static void __init jz_serial_setup(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct uart_port s;
-	REG8(UART0_FCR) |= UARTFCR_UUE; /* enable UART module */
-	memset(&s, 0, sizeof(s));
-	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	s.iotype = SERIAL_IO_MEM;
-	s.regshift = 2;
-	s.uartclk = jz4740_clock_bdata.ext_rate;
-
-	s.line = 0;
-	s.membase = (u8 *)UART0_BASE;
-	s.irq = JZ_IRQ_UART0;
-	if (early_serial_setup(&s) != 0) {
-		printk(KERN_ERR "Serial ttyS0 setup failed!\n");
-	}
-
-	s.line = 1;
-	s.membase = (u8 *)UART1_BASE;
-	s.irq = JZ_IRQ_UART1;
-	if (early_serial_setup(&s) != 0) {
-		printk(KERN_ERR "Serial ttyS1 setup failed!\n");
-	}
-#endif
-}
-
-void __init plat_mem_setup(void)
-{
-	char *argptr;
-
-	argptr = prom_getcmdline();
-
-	/* IO/MEM resources. Which will be the addtion value in `inX' and
-	 * `outX' macros defined in asm/io.h */
-	set_io_port_base(0);
-	ioport_resource.start	= 0x00000000;
-	ioport_resource.end	= 0xffffffff;
-	iomem_resource.start	= 0x00000000;
-	iomem_resource.end	= 0xffffffff;
-
-	_machine_restart = jz_restart;
-	_machine_halt = jz_halt;
-	pm_power_off = jz_power_off;
-	jz_serial_setup();
-}
-
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/time.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/time.c
deleted file mode 100644
index 77fc2012e..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/time.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  	JZ4740 platform timer support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-
-#include <asm/mach-jz4740/irq.h>
-#include <asm/mach-jz4740/jz4740.h>
-#include <asm/time.h>
-#include "clock.h"
-
-#define JZ_REG_TIMER_STOP		0x1C
-#define JZ_REG_TIMER_STOP_SET		0x2C
-#define JZ_REG_TIMER_STOP_CLEAR		0x3C
-#define JZ_REG_TIMER_ENABLE		0x10
-#define JZ_REG_TIMER_ENABLE_SET		0x14
-#define JZ_REG_TIMER_ENABLE_CLEAR	0x18
-#define JZ_REG_TIMER_FLAG		0x20
-#define JZ_REG_TIMER_FLAG_SET		0x24
-#define JZ_REG_TIMER_FLAG_CLEAR		0x28
-#define JZ_REG_TIMER_MASK		0x30
-#define JZ_REG_TIMER_MASK_SET		0x34
-#define JZ_REG_TIMER_MASK_CLEAR		0x38
-
-#define JZ_REG_TIMER_DFR(x) (((x) * 0x10) + 0x40)
-#define JZ_REG_TIMER_DHR(x) (((x) * 0x10) + 0x44)
-#define JZ_REG_TIMER_CNT(x) (((x) * 0x10) + 0x48)
-#define JZ_REG_TIMER_CTRL(x) (((x) * 0x10) + 0x4C)
-
-#define JZ_TIMER_IRQ_HALF(x) BIT((x) + 0x10)
-#define JZ_TIMER_IRQ_FULL(x) BIT(x)
-
-#define JZ_TIMER_CTRL_PWM_ACTIVE_LOW	BIT(8)
-#define JZ_TIMER_CTRL_PWM_ENABLE	BIT(7)
-#define JZ_TIMER_CTRL_PRESCALE_MASK	0x1c
-#define JZ_TIMER_CTRL_PRESCALE_OFFSET	0x3
-#define JZ_TIMER_CTRL_PRESCALE_1	(0 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_4	(1 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_16	(2 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_64	(3 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_256	(4 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_1024	(5 << 3)
-
-#define JZ_TIMER_CTRL_SRC_EXT		BIT(2)
-#define JZ_TIMER_CTRL_SRC_RTC		BIT(1)
-#define JZ_TIMER_CTRL_SRC_PCLK		BIT(0)
-
-static void __iomem *jz4740_timer_base;
-static uint16_t jz4740_jiffies_per_tick;
-
-void jz4740_timer_enable_watchdog(void)
-{
-	writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
-}
-
-void jz4740_timer_disable_watchdog(void)
-{
-	writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
-}
-
-static inline void jz4740_timer_set_period(unsigned int timer, uint16_t period)
-{
-	writew(period, jz4740_timer_base + JZ_REG_TIMER_DFR(timer));
-}
-
-static inline void jz4740_timer_set_duty(unsigned int timer, uint16_t duty)
-{
-	writew(duty, jz4740_timer_base + JZ_REG_TIMER_DHR(timer));
-}
-
-static void jz4740_init_timer(void)
-{
-	uint16_t val = 0;
-	val |= JZ_TIMER_CTRL_PRESCALE_16;
-	val |= JZ_TIMER_CTRL_SRC_EXT;
-
-	writew(val, jz4740_timer_base + JZ_REG_TIMER_CTRL(0));
-	writew(0xffff, jz4740_timer_base + JZ_REG_TIMER_DFR(0));
-	writew(val, jz4740_timer_base + JZ_REG_TIMER_CTRL(1));
-	writew(0xffff, jz4740_timer_base + JZ_REG_TIMER_DFR(1));
-}
-
-static void jz4740_timer_enable(unsigned int timer)
-{
-	writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
-	writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_SET);
-}
-
-static void jz4740_timer_disable(unsigned int timer)
-{
-	writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_CLEAR);
-	writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
-}
-
-static void jz4740_timer_irq_full_enable(unsigned int timer)
-{
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR);
-}
-
-static int jz4740_timer_irq_full_is_enabled(unsigned int timer)
-{
-	return !(readl(jz4740_timer_base + JZ_REG_TIMER_MASK) &
-	JZ_TIMER_IRQ_FULL(timer));
-}
-
-static void jz4740_timer_irq_full_disable(unsigned int timer)
-{
-	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET);
-}
-
-static void jz4740_timer_irq_half_enable(unsigned int timer)
-{
-	writel(JZ_TIMER_IRQ_HALF(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
-	writel(JZ_TIMER_IRQ_HALF(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR);
-}
-
-static void jz4740_timer_irq_half_disable(unsigned int timer)
-{
-	writel(JZ_TIMER_IRQ_HALF(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET);
-}
-
-static cycle_t jz4740_clocksource_read(struct clocksource *cs)
-{
-    uint16_t val;
-	val = readw(jz4740_timer_base + JZ_REG_TIMER_CNT(1));
-	return val;
-}
-
-static struct clocksource jz4740_clocksource = {
-	.name = "jz4740-timer",
-	.rating = 200,
-	.read = jz4740_clocksource_read,
-	.mask = CLOCKSOURCE_MASK(16),
-	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static irqreturn_t jz4740_clockevent_irq(int irq, void *devid)
-{
-	struct clock_event_device *cd = devid;
-
-	writel(JZ_TIMER_IRQ_FULL(0), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
-
-	if (cd->mode != CLOCK_EVT_MODE_PERIODIC) {
-		jz4740_timer_disable(0);
-		cd->event_handler(cd);
-	 } else {
-		cd->event_handler(cd);
-	}
-
-    return IRQ_HANDLED;
-}
-
-static void jz4740_clockevent_set_mode(enum clock_event_mode mode,
-				       struct clock_event_device *cd)
-{
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writew(0x0, jz4740_timer_base + JZ_REG_TIMER_CNT(0));
-		writew(jz4740_jiffies_per_tick, jz4740_timer_base + JZ_REG_TIMER_DFR(0));
-	case CLOCK_EVT_MODE_RESUME:
-		jz4740_timer_irq_full_enable(0);
-		jz4740_timer_enable(0);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		jz4740_timer_disable(0);
-		break;
-	default:
-		break;
-	}
-}
-
-static int jz4740_clockevent_set_next(unsigned long evt, struct
-clock_event_device *cd)
-{
-	writew(0x0, jz4740_timer_base + JZ_REG_TIMER_CNT(0));
-	writew(evt, jz4740_timer_base + JZ_REG_TIMER_DFR(0));
-	jz4740_timer_enable(0);
-
-	return 0;
-}
-
-static struct clock_event_device jz4740_clockevent = {
-	.name = "jz4740-timer",
-	.features = CLOCK_EVT_FEAT_PERIODIC,
-	.set_next_event = jz4740_clockevent_set_next,
-	.set_mode = jz4740_clockevent_set_mode,
-	.rating = 200,
-    .irq = JZ_IRQ_TCU0,
-};
-
-static struct irqaction jz_irqaction = {
-	.handler	= jz4740_clockevent_irq,
-	.flags		= IRQF_PERCPU | IRQF_TIMER | IRQF_DISABLED,
-	.name		= "jz4740-timerirq",
-    .dev_id      = &jz4740_clockevent,
-};
-
-
-void __init plat_time_init(void)
-{
-    int ret;
-	uint32_t clk_rate;
-
-	jz4740_timer_base = ioremap(CPHYSADDR(TCU_BASE), 0x100);
-
-	if (!jz4740_timer_base) {
-	    printk(KERN_ERR "Failed to ioremap timer registers");
-	    return;
-	}
-
-	clk_rate = jz4740_clock_bdata.ext_rate >> 4;
-    jz4740_jiffies_per_tick = DIV_ROUND_CLOSEST(clk_rate, HZ);
-
-	clockevent_set_clock(&jz4740_clockevent, clk_rate);
-	jz4740_clockevent.min_delta_ns = clockevent_delta2ns(100, &jz4740_clockevent);
-	jz4740_clockevent.max_delta_ns = clockevent_delta2ns(0xffff, &jz4740_clockevent);
-	jz4740_clockevent.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&jz4740_clockevent);
-
-	clocksource_set_clock(&jz4740_clocksource, clk_rate);
-	ret = clocksource_register(&jz4740_clocksource);
-
-	if (ret)
-	    printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
-
-	setup_irq(JZ_IRQ_TCU0, &jz_irqaction);
-
-	jz4740_init_timer();
-	writew(jz4740_jiffies_per_tick, jz4740_timer_base + JZ_REG_TIMER_DFR(0));
-    jz4740_timer_irq_half_disable(0);
-    jz4740_timer_irq_full_enable(0);
-	jz4740_timer_enable(0);
-
-    jz4740_timer_irq_half_disable(1);
-    jz4740_timer_irq_full_disable(1);
-
-	jz4740_timer_enable(1);
-}