[xburst] Drop 2.6.32 patches

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22485 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 201 deletions

diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n516.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n516.c
deleted file mode 100644
index 0e146ac84..000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n516.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * linux/arch/mips/jz4740/board-516.c
- *
- * JZ4740 n516 board setup routines.
- *
- * Copyright (c) 2009, Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mmc/jz4740_mmc.h>
-#include <linux/mtd/jz4740_nand.h>
-#include <linux/leds.h>
-
-#include <linux/power_supply.h>
-#include <linux/power/gpio-charger.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-jz4740/board-n516.h>
-#include <asm/mach-jz4740/platform.h>
-
-#include "clock.h"
-
-static long n516_panic_blink(long time)
-{
-	gpio_set_value(GPIO_LED_ENABLE, 1);
-	mdelay(200);
-	gpio_set_value(GPIO_LED_ENABLE, 0);
-	mdelay(200);
-
-	return 400;
-}
-
-static void __init board_gpio_setup(void)
-{
-/*	jz_gpio_enable_pullup(JZ_GPIO_PORTD(23));
-	jz_gpio_enable_pullup(JZ_GPIO_PORTD(24));*/
-}
-
-static struct i2c_gpio_platform_data n516_i2c_pdata = {
-	.sda_pin = JZ_GPIO_PORTD(23),
-	.scl_pin = JZ_GPIO_PORTD(24),
-	.udelay = 2,
-	.timeout = 3 * HZ,
-};
-
-static struct platform_device n516_i2c_device = {
-	.name = "i2c-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &n516_i2c_pdata,
-	},
-};
-
-static const struct i2c_board_info n516_i2c_board_info[] = {
-	{
-		.type		= "LPC524",
-		.addr		= 0x54,
-	},
-	{
-		.type		= "lm75a",
-		.addr		= 0x48,
-	}
-};
-
-static struct jz4740_mmc_platform_data n516_mmc_pdata = {
-	.gpio_card_detect	= GPIO_SD_CD_N,
-	.card_detect_active_low = 1,
-	.gpio_read_only		= -1,
-	.gpio_power		= GPIO_SD_VCC_EN_N,
-	.power_active_low = 1,
-};
-
-static struct gpio_led n516_leds[] = {
-	{
-		.name = "n516:blue:power",
-		.gpio = GPIO_LED_ENABLE,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-		.default_trigger = "nand-disk",
-	}
-};
-
-static struct gpio_led_platform_data n516_leds_pdata = {
-	.leds = n516_leds,
-	.num_leds = ARRAY_SIZE(n516_leds),
-};
-
-static struct platform_device n516_leds_device = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &n516_leds_pdata,
-	},
-};
-
-static struct mtd_partition n516_partitions[] = {
-	{ .name = "NAND BOOT partition",
-	  .offset = 0 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND KERNEL partition",
-	  .offset = 4 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND ROOTFS partition",
-	  .offset = 8 * 0x100000,
-	  .size = 504 * 0x100000,
- 	},
-};
-
-static struct nand_ecclayout n516_ecclayout = {
-	.eccbytes = 36,
-	.eccpos = {
-		 6,  7,  8,  9, 10, 11, 12, 13, 14,
-		15, 16, 17, 18, 19, 20, 21, 22, 23,
-		24, 25, 26, 27, 28, 29, 30, 31, 32,
-		33, 34, 35, 36, 37, 38, 39, 40, 41,
-	},
-	.oobfree = {
-		{.offset = 2,
-		 .length = 4},
-		{.offset = 42,
-		 .length = 22}}
-};
-
-static struct jz_nand_platform_data n516_nand_pdata = {
-	.ecc_layout = &n516_ecclayout,
-	.partitions = n516_partitions,
-	.num_partitions = ARRAY_SIZE(n516_partitions),
-	.busy_gpio = 94,
-};
-
-static char *n516_batteries[] = {
-	"n516_battery",
-};
-
-static struct gpio_charger_platform_data n516_charger_pdata = {
-	.name = "usb",
-	.type = POWER_SUPPLY_TYPE_USB,
-	.gpio = GPIO_USB_DETECT,
-	.gpio_active_low = 1,
-	.batteries = n516_batteries,
-	.num_batteries = ARRAY_SIZE(n516_batteries),
-};
-
-static struct platform_device n516_charger_device = {
-	.name = "gpio-charger",
-	.dev = {
-		.platform_data = &n516_charger_pdata,
-	},
-};
-
-static struct platform_device *n516_devices[] __initdata = {
-	&jz4740_nand_device,
-	&n516_leds_device,
-	&jz4740_mmc_device,
-	&jz4740_i2s_device,
-	&jz4740_codec_device,
-	&jz4740_rtc_device,
-	&jz4740_usb_gdt_device,
-	&n516_i2c_device,
-	&n516_charger_device,
-};
-
-struct jz4740_clock_board_data jz4740_clock_bdata = {
-	.ext_rate = 12000000,
-	.rtc_rate = 32768,
-};
-
-extern int jz_gpiolib_init(void);
-
-static int n516_setup_platform(void)
-{
-	if (jz_gpiolib_init())
-		panic("Failed to initalize jz gpio\n");
-
-	jz4740_clock_init();
-	board_gpio_setup();
-
-	panic_blink = n516_panic_blink;
-	i2c_register_board_info(0, n516_i2c_board_info, ARRAY_SIZE(n516_i2c_board_info));
-	jz4740_mmc_device.dev.platform_data = &n516_mmc_pdata;
-	jz4740_nand_device.dev.platform_data = &n516_nand_pdata;
-
-	return platform_add_devices(n516_devices, ARRAY_SIZE(n516_devices));
-}
-arch_initcall(n516_setup_platform);