strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 45 deletions

diff --git a/target/linux/uml-2.6/README b/target/linux/uml-2.6/README
deleted file mode 100644
index 85cc72c2b..000000000
--- a/target/linux/uml-2.6/README
+++ /dev/null
@@ -1,45 +0,0 @@
-Openwrt inside a user mode linux.  Why would we even want this many ask?
-
-There are potentially a lot of reasons, one obvious one to me, it allows
-folks to 'kick the tires' without actually flashing up any hardware.  It's
-also a great environment for porting over packages, you can get a package
-fully functional in the uclibc root environment inside a uml without actually
-disturbing your 'real router', and then rebuild for a specific target once
-it's fully tested.
-
-This is a first stab at a build that 'just works' and there will be more
-cleanup to come.  The simple directions are:-
-
-Configure for uml target
-Configure with an ext2 root file system
-build it all
-
-In your bin directory you will find a kernel and an ext2 root file system
-when it's finished.  Just run it like this:-
-
-bin/openwrt-uml-2.6-vmlinux ubd0=bin/openwrt-uml-2.6-ext2.img con=null ssl=null ssl0=fd:0,fd:1 con0=null,fd:1 init=/etc/preinit
-
-The uml will start, and eventually the serial console of the uml will be at your
-console prompt.  If you would like it in xterms, substitute con=xterm and con0=xterm.
-No networking is configured, but, it's a starting point.  The resulting file system
-has just enough free space to start kicking the tires and playing in the world of
-'embedded routers' along with all the resource restrictions that come with that
-world.  
-
-To configure networking and more, refer to the user mode linux documentation online.
-A quick start goes along this line.  install the uml-utilities packages so you have
-the uml switch in and running, then add a command param to your uml start like this
-
-eth0=daemon,00:01:01:01:01:01,unix,/<your uml switch control socket here>
-
-With that in, and uml networking actually functional (can be a challenge at times),
-you should be able to ifconfig the interface and talk to the host side, or, if you
-bridged the uml switch to your host network, you should be able to run udhcp and be
-away with networking off to the world.  Again, if you are unfamiliar with uml and
-uml networking, please read the docs and how-to stuff available on the net.  It does
-take some fiddling to get it started and working right the first time, but after that,
-it opens up a whole new world of virtual machines.
-
-
-
-http://user-mode-linux.sourceforge.net/