change prefix for kernelpatchbase 2.6.26

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13619 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 123 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.26/1210-fix-no-uart-leak-when-gps-off.patch.patch b/target/linux/s3c24xx/patches-2.6.26/1210-fix-no-uart-leak-when-gps-off.patch.patch
new file mode 100755
index 000000000..0fc855918
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.26/1210-fix-no-uart-leak-when-gps-off.patch.patch
@@ -0,0 +1,123 @@
+From 75c6d53772b66d6d4237745a5d3185f836e05b70 Mon Sep 17 00:00:00 2001
+From: Andy Green <andy@openmoko.com>
+Date: Fri, 25 Jul 2008 23:06:19 +0100
+Subject: [PATCH] fix-no-uart-leak-when-gps-off.patch
+
+During the suspend current reduction campaign on suspend I
+forced the GPS UART to be GPIO and to drive 0 into the GPS
+unit so we would not burn current there.  On resume it lets
+the pins act as UARTs again.  But really, we should do this
+all the time that the GPS unit is off, lest we leak it
+enough power to hold internal state and make trouble.
+
+Signed-off-by: Andy Green <andy@openmoko.com>
+---
+ arch/arm/plat-s3c24xx/neo1973_pm_gps.c |   57 +++++++++++++------------------
+ 1 files changed, 24 insertions(+), 33 deletions(-)
+
+diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_gps.c b/arch/arm/plat-s3c24xx/neo1973_pm_gps.c
+index 9c6adfa..8cd583d 100644
+--- a/arch/arm/plat-s3c24xx/neo1973_pm_gps.c
++++ b/arch/arm/plat-s3c24xx/neo1973_pm_gps.c
+@@ -272,9 +272,23 @@ static void gps_pwron_set(int on)
+ 
+ #ifdef CONFIG_MACH_NEO1973_GTA02
+ 	if (machine_is_neo1973_gta02()) {
+-		if (on)
++		if (on) {
+ 			pcf50633_voltage_set(pcf50633_global,
+ 				PCF50633_REGULATOR_LDO5, 3000);
++			/* return UART pins to being UART pins */
++			s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_TXD1);
++			/* remove pulldown now it won't be floating any more */
++			s3c2410_gpio_pullup(S3C2410_GPH5, 0);
++		} else {
++			/*
++			 * take care not to power unpowered GPS from UART TX
++			 * return them to GPIO and force low
++			 */
++			s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
++			s3c2410_gpio_setpin(S3C2410_GPH4, 0);
++			/* don't let RX from unpowered GPS float */
++			s3c2410_gpio_pullup(S3C2410_GPH5, 1);
++		}
+ 		pcf50633_onoff_set(pcf50633_global,
+ 			PCF50633_REGULATOR_LDO5, on);
+ 	}
+@@ -284,21 +298,14 @@ static void gps_pwron_set(int on)
+ static int gps_pwron_get(void)
+ {
+ #ifdef CONFIG_MACH_NEO1973_GTA01
+-	if (machine_is_neo1973_gta01()) {
+-		if (s3c2410_gpio_getpin(GTA01_GPIO_GPS_PWRON))
+-			return 1;
+-		else
+-			return 0;
+-	}
++	if (machine_is_neo1973_gta01())
++		return !!s3c2410_gpio_getpin(GTA01_GPIO_GPS_PWRON);
+ #endif /* CONFIG_MACH_NEO1973_GTA01 */
+ 
+ #ifdef CONFIG_MACH_NEO1973_GTA02
+-	if (machine_is_neo1973_gta02()) {
+-		if (pcf50633_onoff_get(pcf50633_global, PCF50633_REGULATOR_LDO5))
+-			return 1;
+-		else
+-			return 0;
+-	}
++	if (machine_is_neo1973_gta02())
++		return !!pcf50633_onoff_get(pcf50633_global,
++						       PCF50633_REGULATOR_LDO5);
+ #endif /* CONFIG_MACH_NEO1973_GTA02 */
+ 	return -1;
+ }
+@@ -496,15 +503,8 @@ static int gta01_pm_gps_suspend(struct platform_device *pdev,
+ #endif /* CONFIG_MACH_NEO1973_GTA01 */
+ 
+ #ifdef CONFIG_MACH_NEO1973_GTA02
+-	if (machine_is_neo1973_gta02()) {
+-		/* take care not to power unpowered GPS from GPIO */
+-		s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
+-		s3c2410_gpio_setpin(S3C2410_GPH4, 0);
+-		/* don't let RX from unpowered GPS float */
+-		s3c2410_gpio_pullup(S3C2410_GPH5, 1);
+-
++	if (machine_is_neo1973_gta02())
+ 		gps_pwron_set(0);
+-	}
+ #endif /* CONFIG_MACH_NEO1973_GTA02 */
+ 
+ 	return 0;
+@@ -513,26 +513,17 @@ static int gta01_pm_gps_suspend(struct platform_device *pdev,
+ static int gta01_pm_gps_resume(struct platform_device *pdev)
+ {
+ #ifdef CONFIG_MACH_NEO1973_GTA01
+-	if (machine_is_neo1973_gta01()) {
++	if (machine_is_neo1973_gta01())
+ 		if (neo1973_gps.power_was_on)
+ 			gps_power_sequence_up();
+-	}
+ #endif /* CONFIG_MACH_NEO1973_GTA01 */
+ 
+ #ifdef CONFIG_MACH_NEO1973_GTA02
+-	if (machine_is_neo1973_gta02()) {
+-		/*
+-		 * resume TXD1 function since we power GPS now... er..
+-		 * WTF?  FIXME We always power GPS on resume ??
+-		 */
+-		s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_TXD1);
+-		/* remove pulldown now it won't be floating any more */
+-		s3c2410_gpio_pullup(S3C2410_GPH5, 0);
+-
++	if (machine_is_neo1973_gta02())
+ 		if (neo1973_gps.power_was_on)
+ 		    gps_pwron_set(1);
+ #endif /* CONFIG_MACH_NEO1973_GTA02 */
+-	}
++
+ 	return 0;
+ }
+ #else
+-- 
+1.5.6.3
+