nuke obsolete kernel stuff

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14875 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 122 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.26/1090-fix-lis302dl-suspend-gpio.patch.patch b/target/linux/s3c24xx/patches-2.6.26/1090-fix-lis302dl-suspend-gpio.patch.patch
deleted file mode 100755
index 9a9c6051d..000000000
--- a/target/linux/s3c24xx/patches-2.6.26/1090-fix-lis302dl-suspend-gpio.patch.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From f97c81869175362f755488bd50ddf85570236ce8 Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@openmoko.com>
-Date: Fri, 25 Jul 2008 23:06:02 +0100
-Subject: [PATCH] fix-lis302dl-suspend-gpio.patch
- Add platform stuff to deal with going in and out of suspend
- so the motion sensor IO is not driving high into unpowered sensors
-
-Signed-off-by: Andy Green <andy@openmoko.com>
----
- arch/arm/mach-s3c2440/mach-gta02.c |   28 +++++++++++++++++++++++++++-
- drivers/input/misc/lis302dl.c      |   15 +++++++++++++++
- include/linux/lis302dl.h           |    1 +
- 3 files changed, 43 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
-index 5bd68a6..99206ee 100644
---- a/arch/arm/mach-s3c2440/mach-gta02.c
-+++ b/arch/arm/mach-s3c2440/mach-gta02.c
-@@ -887,7 +887,31 @@ void gat02_lis302dl_bitbang_read(struct lis302dl_info *lis)
- }
- 
- 
--struct lis302dl_platform_data lis302_pdata[] = {
-+void gat02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
-+{
-+	struct lis302dl_platform_data *pdata = lis->pdata;
-+
-+	if (!resume) {
-+		 /*
-+		 * we don't want to power them with a high level
-+		 * because GSENSOR_3V3 is not up during suspend
-+		 */
-+		s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
-+		s3c2410_gpio_setpin(pdata->pin_clk, 0);
-+		s3c2410_gpio_setpin(pdata->pin_mosi, 0);
-+		/* misnomer: it is a pullDOWN in 2442 */
-+		s3c2410_gpio_pullup(pdata->pin_miso, 1);
-+		return;
-+	}
-+
-+	/* back to normal */
-+	s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
-+	s3c2410_gpio_setpin(pdata->pin_clk, 1);
-+	/* misnomer: it is a pullDOWN in 2442 */
-+	s3c2410_gpio_pullup(pdata->pin_miso, 0);
-+}
-+
-+const struct lis302dl_platform_data lis302_pdata[] = {
- 	{
- 		.name		= "lis302-1 (top)",
- 		.pin_chip_select= S3C2410_GPD12,
-@@ -896,6 +920,7 @@ struct lis302dl_platform_data lis302_pdata[] = {
- 		.pin_miso	= S3C2410_GPG5,
- 		.open_drain	= 1, /* altered at runtime by PCB rev */
- 		.lis302dl_bitbang_read = gat02_lis302dl_bitbang_read,
-+		.lis302dl_suspend_io = gat02_lis302dl_suspend_io,
- 	}, {
- 		.name		= "lis302-2 (bottom)",
- 		.pin_chip_select= S3C2410_GPD13,
-@@ -904,6 +929,7 @@ struct lis302dl_platform_data lis302_pdata[] = {
- 		.pin_miso	= S3C2410_GPG5,
- 		.open_drain	= 1, /* altered at runtime by PCB rev */
- 		.lis302dl_bitbang_read = gat02_lis302dl_bitbang_read,
-+		.lis302dl_suspend_io = gat02_lis302dl_suspend_io,
- 	},
- };
- 
-diff --git a/drivers/input/misc/lis302dl.c b/drivers/input/misc/lis302dl.c
-index 36bdcf7..2be816a 100644
---- a/drivers/input/misc/lis302dl.c
-+++ b/drivers/input/misc/lis302dl.c
-@@ -428,6 +428,15 @@ static int lis302dl_suspend(struct spi_device *spi, pm_message_t state)
- 	disable_irq(lis->spi_dev->irq);
- 	local_save_flags(flags);
- 
-+	/*
-+	 * When we share SPI over multiple sensors, there is a race here
-+	 * that one or more sensors will lose.  In that case, the shared
-+	 * SPI bus GPIO will be in sleep mode and partially pulled down.  So
-+	 * we explicitly put our IO into "wake" mode here before the final
-+	 * traffic to the sensor.
-+	 */
-+	(lis->pdata->lis302dl_suspend_io)(lis, 1);
-+
- 	/* save registers */
- 	lis->regs[LIS302DL_REG_CTRL1] = reg_read(lis, LIS302DL_REG_CTRL1);
- 	lis->regs[LIS302DL_REG_CTRL2] = reg_read(lis, LIS302DL_REG_CTRL2);
-@@ -467,6 +476,9 @@ static int lis302dl_suspend(struct spi_device *spi, pm_message_t state)
- 		reg_write(lis, LIS302DL_REG_CTRL1, tmp);
- 	}
- 
-+	/* place our IO to the device in sleep-compatible states */
-+	(lis->pdata->lis302dl_suspend_io)(lis, 0);
-+
- 	local_irq_restore(flags);
- 
- 	return 0;
-@@ -479,6 +491,9 @@ static int lis302dl_resume(struct spi_device *spi)
- 
- 	local_save_flags(flags);
- 
-+	/* get our IO to the device back in operational states */
-+	(lis->pdata->lis302dl_suspend_io)(lis, 1);
-+
- 	/* restore registers after resume */
- 	reg_write(lis, LIS302DL_REG_CTRL1, lis->regs[LIS302DL_REG_CTRL1]);
- 	reg_write(lis, LIS302DL_REG_CTRL2, lis->regs[LIS302DL_REG_CTRL2]);
-diff --git a/include/linux/lis302dl.h b/include/linux/lis302dl.h
-index 2dea813..0d6b4c4 100644
---- a/include/linux/lis302dl.h
-+++ b/include/linux/lis302dl.h
-@@ -16,6 +16,7 @@ struct lis302dl_platform_data {
- 	unsigned long pin_miso;
- 	int open_drain;
- 	void (*lis302dl_bitbang_read)(struct lis302dl_info *);
-+	void (*lis302dl_suspend_io)(struct lis302dl_info *, int resuming);
- };
- 
- struct lis302dl_info {
--- 
-1.5.6.3
-