nuke obsolete kernel stuff

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14875 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 165 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.24/1320--ARM-S3C24xx-Add-preliminary-E-TEN-glofiish-M800-s.patch b/target/linux/s3c24xx/patches-2.6.24/1320--ARM-S3C24xx-Add-preliminary-E-TEN-glofiish-M800-s.patch
deleted file mode 100644
index 44ef8fbcc..000000000
--- a/target/linux/s3c24xx/patches-2.6.24/1320--ARM-S3C24xx-Add-preliminary-E-TEN-glofiish-M800-s.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From eee43706c5969f5d99096dddefae3be0c41a6ed2 Mon Sep 17 00:00:00 2001
-From: Harald Welte <laforge@gnumonks.org>
-Date: Thu, 13 Nov 2008 08:29:11 +0000
-Subject: [PATCH] [ARM] S3C24xx: Add preliminary E-TEN glofiish M800 support
-
-This patch adds preliminary support for the M800.  If booted
-through haret, the system has the following working components:
-* NAND read support
-* framebuffer / LCM (no jbt6k74 power management yet)
-* USB device controller (incl. Pullup)
-* microSD card (incl. card-detect)
-* backlight brightness control (using gta01-bl.c)
-* input event device for power, camera and record button
-* input event device for keyboard slide event
-* bluetooth power control (using gta01-pm-bt)
-
-Many things are still missing, like
-* NAND write support
-* GPS power control
-* GSM/3G modem interface
-* capsense buttons, joystick and querty-keyboard
-* camera
-* audio
-
-Signed-off-by: Harald Welte <laforge@gnumonks.org>
----
- arch/arm/mach-s3c2440/Kconfig         |    7 +++++++
- arch/arm/mach-s3c2440/Makefile        |    1 +
- arch/arm/plat-s3c24xx/neo1973_pm_bt.c |   17 +++++++++++++++++
- arch/arm/tools/mach-types             |    1 +
- drivers/input/keyboard/Kconfig        |   11 +++++++++++
- drivers/input/keyboard/Makefile       |    1 +
- drivers/mtd/nand/nand_bbt.c           |    2 ++
- 7 files changed, 40 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
-index 4a211d8..4c3b6b2 100644
---- a/arch/arm/mach-s3c2440/Kconfig
-+++ b/arch/arm/mach-s3c2440/Kconfig
-@@ -98,6 +98,13 @@ config NEO1973_GTA02_2440
- 	   Say Y here if you are using an early hardware revision
- 	   of the FIC/Openmoko Neo1973 GTA02 GSM Phone.
- 
-+config MACH_M800
-+	bool "E-TEN glofiish M800/X800"
-+	select CPU_S3C2442
-+	help
-+	   Say Y here if you are using the E-TEN glofiish M800/X800.
-+
-+
- endmenu
- 
- #source "arch/arm/mach-s3c2440/camera/Kconfig"
-diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
-index e3ca9e3..8617820 100644
---- a/arch/arm/mach-s3c2440/Makefile
-+++ b/arch/arm/mach-s3c2440/Makefile
-@@ -24,3 +24,4 @@ obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
- obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
- obj-$(CONFIG_MACH_HXD8)		+= mach-hxd8.o
- obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-+obj-$(CONFIG_MACH_M800)		+= mach-glofiish.o
-diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
-index dfc9ae8..dcb251b 100644
---- a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
-+++ b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
-@@ -30,6 +30,9 @@
- #include <linux/pcf50633.h>
- #endif
- 
-+#ifdef CONFIG_MACH_M800
-+#include <asm/arch/glofiish.h>
-+#endif
- 
- #define DRVMSG "FIC Neo1973 Bluetooth Power Management"
- 
-@@ -56,6 +59,14 @@ static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
- 			break;
- #endif /* CONFIG_MACH_NEO1973_GTA02 */
- 
-+#ifdef CONFIG_MACH_M800
-+		case MACH_TYPE_M800:
-+			if (s3c2410_gpio_getpin(M800_GPIO_BT_POWER_1) &&
-+			    s3c2410_gpio_getpin(M800_GPIO_BT_POWER_2))
-+				goto out_1;
-+			break;
-+#endif /* CONFIG_MACH_M800 */
-+
- 		}
- 	} else if (!strcmp(attr->attr.name, "reset")) {
- 		switch (machine_arch_type) {
-@@ -121,6 +132,12 @@ static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
- 			break;
- #endif /* CONFIG_MACH_NEO1973_GTA02 */
- 
-+#ifdef CONFIG_MACH_M800
-+		case MACH_TYPE_M800:
-+			s3c2410_gpio_setpin(M800_GPIO_BT_POWER_1, on);
-+			s3c2410_gpio_setpin(M800_GPIO_BT_POWER_2, on);
-+			break;
-+#endif /* CONFIG_MACH_M800 */
- 		}
- 	} else if (!strcmp(attr->attr.name, "reset")) {
- 		/* reset is low-active, so we need to invert */
-diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
-index 0a9a5e7..2578091 100644
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -1367,3 +1367,4 @@ db88f5281		MACH_DB88F5281		DB88F5281		1358
- csb726			MACH_CSB726		CSB726			1359
- tik27			MACH_TIK27		TIK27			1360
- mx_uc7420		MACH_MX_UC7420		MX_UC7420		1361
-+m800			MACH_M800		M800			1772
-diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
-index a61ca45..68a893f 100644
---- a/drivers/input/keyboard/Kconfig
-+++ b/drivers/input/keyboard/Kconfig
-@@ -304,6 +304,17 @@ config KEYBOARD_NEO1973
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called neo1973kbd.
- 
-+config KEYBOARD_M800
-+	tristate "E-TEN glofiish M800 buttons"
-+	depends on MACH_M800
-+	default y
-+	help
-+	  Say Y here to enable the buttons on the E-TEN glofiish
-+	  M800 GSM phone.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called m800kbd.
-+
- config KEYBOARD_QT2410
- 	tristate "QT2410 buttons"
- 	depends on MACH_QT2410
-diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
-index 34bfc33..005a050 100644
---- a/drivers/input/keyboard/Makefile
-+++ b/drivers/input/keyboard/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
- obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
- obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikbd.o
- obj-$(CONFIG_KEYBOARD_NEO1973)		+= neo1973kbd.o
-+obj-$(CONFIG_KEYBOARD_M800)		+= m800kbd.o
- obj-$(CONFIG_KEYBOARD_QT2410)		+= qt2410kbd.o
- obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
- obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
-diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
-index 5e121ce..7e20816 100644
---- a/drivers/mtd/nand/nand_bbt.c
-+++ b/drivers/mtd/nand/nand_bbt.c
-@@ -430,8 +430,10 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
- 
- 		if (ret) {
- 			this->bbt[i >> 3] |= 0x03 << (i & 0x6);
-+#if 0
- 			printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
- 			       i >> 1, (unsigned int)from);
-+#endif
- 			mtd->ecc_stats.badblocks++;
- 		}
- 
--- 
-1.5.6.5
-