[s3c24xx] bump to 2.6.30-rc6

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15918 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 3118 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/keyboard/gta02kbd.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/keyboard/gta02kbd.c
new file mode 100644
index 000000000..0814d100e
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/keyboard/gta02kbd.c
@@ -0,0 +1,442 @@
+/*
+ * Keyboard driver for Openmoko Freerunner GSM phone
+ *
+ * (C) 2006-2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * inspired by corkgbd.c by Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include <mach/gpio.h>
+#include <asm/mach-types.h>
+
+#ifdef CONFIG_PM
+extern int global_inside_suspend;
+#else
+#define global_inside_suspend 0
+#endif
+
+struct gta02kbd {
+	struct platform_device *pdev;
+	struct input_dev *input;
+	struct device *cdev;
+	struct work_struct work;
+	int aux_state;
+	int work_in_progress;
+	int hp_irq_count_in_work;
+	int hp_irq_count;
+	int jack_irq;
+};
+
+static struct class *gta02kbd_switch_class;
+
+enum keys {
+	GTA02_KEY_AUX,
+	GTA02_KEY_HOLD,
+	GTA02_KEY_JACK,
+};
+
+struct gta02kbd_key {
+	const char * name;
+	irqreturn_t (*isr)(int irq, void *dev_id);
+	int irq;
+	int input_key;
+};
+
+static irqreturn_t gta02kbd_aux_irq(int irq, void *dev_id);
+static irqreturn_t gta02kbd_headphone_irq(int irq, void *dev_id);
+static irqreturn_t gta02kbd_default_key_irq(int irq, void *dev_id);
+
+
+static struct gta02kbd_key keys[] = {
+	[GTA02_KEY_AUX] = {
+		.name = "GTA02 AUX button",
+		.isr = gta02kbd_aux_irq,
+		.input_key = KEY_PHONE,
+	},
+	[GTA02_KEY_HOLD] = {
+		.name = "GTA02 HOLD button",
+		.isr = gta02kbd_default_key_irq,
+		.input_key = KEY_PAUSE,
+	},
+	[GTA02_KEY_JACK] = {
+		.name = "GTA02 Headphone jack",
+		.isr = gta02kbd_headphone_irq,
+	},
+};
+
+/* This timer section filters AUX button IRQ bouncing */
+
+static void aux_key_timer_f(unsigned long data);
+
+static struct timer_list aux_key_timer =
+		TIMER_INITIALIZER(aux_key_timer_f, 0, 0);
+
+#define AUX_TIMER_TIMEOUT (HZ >> 7)
+#define AUX_TIMER_ALLOWED_NOOP 2
+#define AUX_TIMER_CONSECUTIVE_EVENTS 5
+
+struct gta02kbd *timer_kbd;
+
+static void aux_key_timer_f(unsigned long data)
+{
+	static int noop_counter;
+	static int last_key = -1;
+	static int last_count;
+	int key_pressed;
+
+	key_pressed =
+		gpio_get_value(timer_kbd->pdev->resource[GTA02_KEY_AUX].start);
+
+	if (likely(key_pressed == last_key))
+		last_count++;
+	else {
+		last_count = 1;
+		last_key = key_pressed;
+	}
+
+	if (unlikely(last_count >= AUX_TIMER_CONSECUTIVE_EVENTS)) {
+		if (timer_kbd->aux_state != last_key) {
+			input_report_key(timer_kbd->input, KEY_PHONE, last_key);
+			input_sync(timer_kbd->input);
+
+			timer_kbd->aux_state = last_key;
+			noop_counter = 0;
+		}
+		last_count = 0;
+		if (unlikely(++noop_counter > AUX_TIMER_ALLOWED_NOOP)) {
+			noop_counter = 0;
+			return;
+		}
+	}
+
+	mod_timer(&aux_key_timer, jiffies + AUX_TIMER_TIMEOUT);
+}
+
+static irqreturn_t gta02kbd_aux_irq(int irq, void *dev)
+{
+	mod_timer(&aux_key_timer, jiffies + AUX_TIMER_TIMEOUT);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t gta02kbd_default_key_irq(int irq, void *dev_id)
+{
+	struct gta02kbd *kbd = dev_id;
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(keys); n++) {
+
+		if (irq != keys[n].irq)
+			continue;
+
+		input_report_key(kbd->input, keys[n].input_key,
+				  gpio_get_value(kbd->pdev->resource[n].start));
+		input_sync(kbd->input);
+	}
+
+	return IRQ_HANDLED;
+}
+
+
+static const char *event_array_jack[2][4] = {
+	[0] = {
+		"SWITCH_NAME=headset",
+		"SWITCH_STATE=0",
+		"EVENT=remove",
+		NULL
+	},
+	[1] = {
+		"SWITCH_NAME=headset",
+		"SWITCH_STATE=1",
+		"EVENT=insert",
+		NULL
+	},
+};
+
+static void gta02kbd_jack_event(struct device *dev, int num)
+{
+	kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, (char **)event_array_jack[!!num]);
+}
+
+
+static void gta02kbd_debounce_jack(struct work_struct *work)
+{
+	struct gta02kbd *kbd = container_of(work, struct gta02kbd, work);
+	unsigned long flags;
+	int loop = 0;
+	int level;
+
+	do {
+		/*
+		 * we wait out any multiple interrupt
+		 * stuttering in 100ms lumps
+		 */
+		do {
+			kbd->hp_irq_count_in_work = kbd->hp_irq_count;
+			msleep(100);
+		} while (kbd->hp_irq_count != kbd->hp_irq_count_in_work);
+		/*
+		 * no new interrupts on jack for 100ms...
+		 * ok we will report it
+		 */
+		level = gpio_get_value(kbd->pdev->resource[GTA02_KEY_JACK].start);
+		input_report_switch(kbd->input, SW_HEADPHONE_INSERT, level);
+		input_sync(kbd->input);
+		gta02kbd_jack_event(kbd->cdev, level);
+		/*
+		 * we go around the outer loop again if we detect that more
+		 * interrupts came while we are servicing here.  But we have
+		 * to sequence it carefully with interrupts off
+		 */
+		local_save_flags(flags);
+		/* no interrupts during this work means we can exit the work */
+		loop = !!(kbd->hp_irq_count != kbd->hp_irq_count_in_work);
+		if (!loop)
+			kbd->work_in_progress = 0;
+		local_irq_restore(flags);
+		/*
+		 * interrupt that comes here will either queue a new work action
+		 * since work_in_progress is cleared now, or be dealt with
+		 * when we loop.
+		 */
+	} while (loop);
+}
+
+
+static irqreturn_t gta02kbd_headphone_irq(int irq, void *dev_id)
+{
+	struct gta02kbd *gta02kbd_data = dev_id;
+
+	/*
+	 * this interrupt is prone to bouncing and userspace doesn't like
+	 * to have to deal with that kind of thing.  So we do not accept
+	 * that a jack interrupt is equal to a jack event.  Instead we fire
+	 * some work on the first interrupt, and it hangs about in 100ms units
+	 * until no more interrupts come.  Then it accepts the state it finds
+	 * for jack insert and reports it once
+	 */
+
+	gta02kbd_data->hp_irq_count++;
+	/*
+	 * the first interrupt we see for a while, we fire the work item
+	 * and record the interrupt count when we did that.  If more interrupts
+	 * come in the meanwhile, we can tell by the difference in that
+	 * stored count and hp_irq_count which increments every interrupt
+	 */
+	if (!gta02kbd_data->work_in_progress) {
+		gta02kbd_data->jack_irq = irq;
+		gta02kbd_data->hp_irq_count_in_work =
+						gta02kbd_data->hp_irq_count;
+		if (!schedule_work(&gta02kbd_data->work))
+			printk(KERN_ERR
+				"Unable to schedule headphone debounce\n");
+		else
+			gta02kbd_data->work_in_progress = 1;
+	}
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_PM
+static int gta02kbd_suspend(struct platform_device *dev, pm_message_t state)
+{
+	disable_irq(keys[GTA02_KEY_AUX].irq);
+	del_timer_sync(&aux_key_timer);
+	return 0;
+}
+
+static int gta02kbd_resume(struct platform_device *dev)
+{
+	enable_irq(keys[GTA02_KEY_AUX].irq);
+	return 0;
+}
+#else
+#define gta02kbd_suspend	NULL
+#define gta02kbd_resume	NULL
+#endif
+
+static ssize_t gta02kbd_switch_name_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%s\n", "gta02 Headset Jack");
+}
+
+static ssize_t gta02kbd_switch_state_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct gta02kbd *kbd = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n",
+		   gpio_get_value(kbd->pdev->resource[GTA02_KEY_JACK].start));
+}
+
+static DEVICE_ATTR(name, S_IRUGO , gta02kbd_switch_name_show, NULL);
+static DEVICE_ATTR(state, S_IRUGO , gta02kbd_switch_state_show, NULL);
+
+static int gta02kbd_probe(struct platform_device *pdev)
+{
+	struct gta02kbd *gta02kbd;
+	struct input_dev *input_dev;
+	int rc;
+	int irq;
+	int n;
+
+	gta02kbd = kzalloc(sizeof(struct gta02kbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!gta02kbd || !input_dev) {
+		kfree(gta02kbd);
+		input_free_device(input_dev);
+		return -ENOMEM;
+	}
+
+	gta02kbd->pdev = pdev;
+	timer_kbd = gta02kbd;
+
+	if (pdev->resource[0].flags != 0)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, gta02kbd);
+
+	gta02kbd->input = input_dev;
+
+	INIT_WORK(&gta02kbd->work, gta02kbd_debounce_jack);
+
+	input_dev->name = "GTA02 Buttons";
+	input_dev->phys = "gta02kbd/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_SW);
+	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
+	set_bit(KEY_PHONE, input_dev->keybit);
+	set_bit(KEY_PAUSE, input_dev->keybit);
+
+	rc = input_register_device(gta02kbd->input);
+	if (rc)
+		goto out_register;
+
+	gta02kbd->cdev = device_create(gta02kbd_switch_class,
+					  &pdev->dev, 0, gta02kbd, "headset");
+	if (unlikely(IS_ERR(gta02kbd->cdev))) {
+		rc = PTR_ERR(gta02kbd->cdev);
+		goto out_device_create;
+	}
+
+	rc = device_create_file(gta02kbd->cdev, &dev_attr_name);
+	if(rc)
+		goto out_device_create_file;
+
+	rc = device_create_file(gta02kbd->cdev, &dev_attr_state);
+	if(rc)
+		goto out_device_create_file;
+
+	/* register GPIO IRQs */
+	for(n = 0; n < min(pdev->num_resources, ARRAY_SIZE(keys)); n++) {
+
+		if (!pdev->resource[0].start)
+			continue;
+
+		irq = gpio_to_irq(pdev->resource[n].start);
+		if (irq < 0)
+			continue;
+
+		if (request_irq(irq, keys[n].isr, IRQF_DISABLED |
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				keys[n].name, gta02kbd)) {
+			dev_err(&pdev->dev, "Can't get IRQ %u\n", irq);
+
+			/* unwind any irq registrations and fail */
+
+			while (n > 0) {
+				n--;
+				free_irq(gpio_to_irq(pdev->resource[n].start),
+								    gta02kbd);
+			}
+			goto out_device_create_file;
+		}
+
+		keys[n].irq = irq;
+	}
+
+	enable_irq_wake(keys[GTA02_KEY_JACK].irq);
+
+	return 0;
+
+out_device_create_file:
+	device_unregister(gta02kbd->cdev);
+out_device_create:
+	input_unregister_device(gta02kbd->input);
+out_register:
+	input_free_device(gta02kbd->input);
+	platform_set_drvdata(pdev, NULL);
+	kfree(gta02kbd);
+
+	return -ENODEV;
+}
+
+static int gta02kbd_remove(struct platform_device *pdev)
+{
+	struct gta02kbd *gta02kbd = platform_get_drvdata(pdev);
+
+	free_irq(gpio_to_irq(pdev->resource[2].start), gta02kbd);
+	free_irq(gpio_to_irq(pdev->resource[1].start), gta02kbd);
+	free_irq(gpio_to_irq(pdev->resource[0].start), gta02kbd);
+
+	device_unregister(gta02kbd->cdev);
+	input_unregister_device(gta02kbd->input);
+	input_free_device(gta02kbd->input);
+	platform_set_drvdata(pdev, NULL);
+	kfree(gta02kbd);
+
+	return 0;
+}
+
+static struct platform_driver gta02kbd_driver = {
+	.probe		= gta02kbd_probe,
+	.remove		= gta02kbd_remove,
+	.suspend	= gta02kbd_suspend,
+	.resume		= gta02kbd_resume,
+	.driver		= {
+		.name	= "gta02-button",
+	},
+};
+
+static int __devinit gta02kbd_init(void)
+{
+	gta02kbd_switch_class = class_create(THIS_MODULE, "switch");
+	if (IS_ERR(gta02kbd_switch_class))
+		return PTR_ERR(gta02kbd_switch_class);
+	return platform_driver_register(&gta02kbd_driver);
+}
+
+static void __exit gta02kbd_exit(void)
+{
+	platform_driver_unregister(&gta02kbd_driver);
+	class_destroy(gta02kbd_switch_class);
+}
+
+module_init(gta02kbd_init);
+module_exit(gta02kbd_exit);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko Freerunner buttons input driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/misc/lis302dl.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/misc/lis302dl.c
new file mode 100644
index 000000000..dc6602a8e
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/misc/lis302dl.c
@@ -0,0 +1,957 @@
+/* Linux kernel driver for the ST LIS302D 3-axis accelerometer
+ *
+ * Copyright (C) 2007-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *         converted to private bitbang by:
+ *         Andy Green <andy@openmoko.com>
+ *         ability to set acceleration threshold added by:
+ *         Simon Kagstrom <simon.kagstrom@gmail.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * TODO
+ * 	* statistics for overflow events
+ * 	* configuration interface (sysfs) for
+ * 		* enable/disable x/y/z axis data ready
+ * 		* enable/disable resume from freee fall / click
+ * 		* free fall / click parameters
+ * 		* high pass filter parameters
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+
+#include <linux/lis302dl.h>
+
+/* Utility functions */
+static u8 __reg_read(struct lis302dl_info *lis, u8 reg)
+{
+	struct spi_message msg;
+	struct spi_transfer t;
+	u8 data[2] = {0xc0 | reg};
+	int rc;
+
+	spi_message_init(&msg);
+	memset(&t, 0, sizeof t);
+	t.len = 2;
+	spi_message_add_tail(&t, &msg);
+	t.tx_buf = &data[0];
+	t.rx_buf = &data[0];
+
+	/* Should complete without blocking */
+	rc = spi_non_blocking_transfer(lis->spi, &msg);
+	if (rc < 0) {
+		dev_err(lis->dev, "Error reading register\n");
+		return rc;
+	}
+
+	return data[1];
+}
+
+static void __reg_write(struct lis302dl_info *lis, u8 reg, u8 val)
+{
+	struct spi_message msg;
+	struct spi_transfer t;
+	u8 data[2] = {reg, val};
+
+	spi_message_init(&msg);
+	memset(&t, 0, sizeof t);
+	t.len = 2;
+	spi_message_add_tail(&t, &msg);
+	t.tx_buf = &data[0];
+	t.rx_buf = &data[0];
+
+	/* Completes without blocking */
+	if (spi_non_blocking_transfer(lis->spi, &msg) < 0)
+		dev_err(lis->dev, "Error writing register\n");
+}
+
+static void __reg_set_bit_mask(struct lis302dl_info *lis, u8 reg, u8 mask,
+		u8 val)
+{
+	u_int8_t tmp;
+
+	val &= mask;
+
+	tmp = __reg_read(lis, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	__reg_write(lis, reg, tmp);
+}
+
+static int __ms_to_duration(struct lis302dl_info *lis, int ms)
+{
+	/* If we have 400 ms sampling rate, the stepping is 2.5 ms,
+	 * on 100 ms the stepping is 10ms */
+	if (lis->flags & LIS302DL_F_DR)
+		return min((ms * 10) / 25, 637);
+
+	return min(ms / 10, 2550);
+}
+
+static int __duration_to_ms(struct lis302dl_info *lis, int duration)
+{
+	if (lis->flags & LIS302DL_F_DR)
+		return (duration * 25) / 10;
+
+	return duration * 10;
+}
+
+static u8 __mg_to_threshold(struct lis302dl_info *lis, int mg)
+{
+	/* If FS is set each bit is 71mg, otherwise 18mg. The THS register
+	 * has 7 bits for the threshold value */
+	if (lis->flags & LIS302DL_F_FS)
+		return min(mg / 71, 127);
+
+	return min(mg / 18, 127);
+}
+
+static int __threshold_to_mg(struct lis302dl_info *lis, u8 threshold)
+{
+	if (lis->flags & LIS302DL_F_FS)
+		return threshold * 71;
+
+	return threshold * 18;
+}
+
+/* interrupt handling related */
+
+enum lis302dl_intmode {
+	LIS302DL_INTMODE_GND		= 0x00,
+	LIS302DL_INTMODE_FF_WU_1	= 0x01,
+	LIS302DL_INTMODE_FF_WU_2	= 0x02,
+	LIS302DL_INTMODE_FF_WU_12	= 0x03,
+	LIS302DL_INTMODE_DATA_READY	= 0x04,
+	LIS302DL_INTMODE_CLICK		= 0x07,
+};
+
+static void __lis302dl_int_mode(struct device *dev, int int_pin,
+			      enum lis302dl_intmode mode)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	switch (int_pin) {
+	case 1:
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x07, mode);
+		break;
+	case 2:
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x38, mode << 3);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static void __enable_wakeup(struct lis302dl_info *lis)
+{
+	__reg_write(lis, LIS302DL_REG_CTRL1, 0);
+
+	/* First zero to get to a known state */
+	__reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, LIS302DL_FFWUCFG_XHIE |
+			LIS302DL_FFWUCFG_YHIE | LIS302DL_FFWUCFG_ZHIE |
+			LIS302DL_FFWUCFG_LIR);
+	__reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
+			__mg_to_threshold(lis, lis->wakeup.threshold));
+	__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
+			__ms_to_duration(lis, lis->wakeup.duration));
+
+	/* Route the interrupt for wakeup */
+	__lis302dl_int_mode(lis->dev, 1,
+			LIS302DL_INTMODE_FF_WU_1);
+
+	__reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
+	__reg_read(lis, LIS302DL_REG_OUT_X);
+	__reg_read(lis, LIS302DL_REG_OUT_Y);
+	__reg_read(lis, LIS302DL_REG_OUT_Z);
+	__reg_read(lis, LIS302DL_REG_STATUS);
+	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
+	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
+	__reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD | 7);
+}
+
+static void __enable_data_collection(struct lis302dl_info *lis)
+{
+	u_int8_t ctrl1 = LIS302DL_CTRL1_PD | LIS302DL_CTRL1_Xen |
+			 LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen;
+
+	/* make sure we're powered up and generate data ready */
+	__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, ctrl1);
+
+	/* If the threshold is zero, let the device generated an interrupt
+	 * on each datum */
+	if (lis->threshold == 0) {
+		__reg_write(lis, LIS302DL_REG_CTRL2, 0);
+		__lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_DATA_READY);
+		__lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_DATA_READY);
+	} else {
+		__reg_write(lis, LIS302DL_REG_CTRL2,
+				LIS302DL_CTRL2_HPFF1);
+		__reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
+				__mg_to_threshold(lis, lis->threshold));
+		__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
+				__ms_to_duration(lis, lis->duration));
+
+		/* Clear the HP filter "starting point" */
+		__reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
+		__reg_write(lis, LIS302DL_REG_FF_WU_CFG_1,
+				LIS302DL_FFWUCFG_XHIE | LIS302DL_FFWUCFG_YHIE |
+				LIS302DL_FFWUCFG_ZHIE | LIS302DL_FFWUCFG_LIR);
+		__lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_FF_WU_12);
+		__lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_FF_WU_12);
+	}
+}
+
+#if 0
+static void _report_btn_single(struct input_dev *inp, int btn)
+{
+	input_report_key(inp, btn, 1);
+	input_sync(inp);
+	input_report_key(inp, btn, 0);
+}
+
+static void _report_btn_double(struct input_dev *inp, int btn)
+{
+	input_report_key(inp, btn, 1);
+	input_sync(inp);
+	input_report_key(inp, btn, 0);
+	input_sync(inp);
+	input_report_key(inp, btn, 1);
+	input_sync(inp);
+	input_report_key(inp, btn, 0);
+}
+#endif
+
+
+static void lis302dl_bitbang_read_sample(struct lis302dl_info *lis)
+{
+	u8 data[(LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS) + 2] = {0xC0 | LIS302DL_REG_STATUS};
+	u8 *read = data + 1;
+	unsigned long flags;
+	int mg_per_sample = __threshold_to_mg(lis, 1);
+	struct spi_message msg;
+	struct spi_transfer t;
+
+	spi_message_init(&msg);
+	memset(&t, 0, sizeof t);
+	t.len = sizeof(data);
+	spi_message_add_tail(&t, &msg);
+	t.tx_buf = &data[0];
+	t.rx_buf = &data[0];
+
+	/* grab the set of register containing status and XYZ data */
+
+	local_irq_save(flags);
+
+	/* Should complete without blocking */
+	if (spi_non_blocking_transfer(lis->spi, &msg) < 0)
+		dev_err(lis->dev, "Error reading registers\n");
+
+	local_irq_restore(flags);
+
+	/*
+	 * at the minute the test below fails 50% of the time due to
+	 * a problem with level interrupts causing ISRs to get called twice.
+	 * This is a workaround for that, but actually this test is still
+	 * valid and the information can be used for overrrun stats.
+	 */
+
+	/* has any kind of overrun been observed by the lis302dl? */
+	if (read[0] & (LIS302DL_STATUS_XOR |
+		       LIS302DL_STATUS_YOR |
+		       LIS302DL_STATUS_ZOR))
+		lis->overruns++;
+
+	/* we have a valid sample set? */
+	if (read[0] & LIS302DL_STATUS_XYZDA) {
+		input_report_abs(lis->input_dev, ABS_X, mg_per_sample *
+			    (s8)read[LIS302DL_REG_OUT_X - LIS302DL_REG_STATUS]);
+		input_report_abs(lis->input_dev, ABS_Y, mg_per_sample *
+			    (s8)read[LIS302DL_REG_OUT_Y - LIS302DL_REG_STATUS]);
+		input_report_abs(lis->input_dev, ABS_Z, mg_per_sample *
+			    (s8)read[LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS]);
+
+		input_sync(lis->input_dev);
+	}
+
+	if (lis->threshold)
+		/* acknowledge the wakeup source */
+		__reg_read(lis,	LIS302DL_REG_FF_WU_SRC_1);
+}
+
+static irqreturn_t lis302dl_interrupt(int irq, void *_lis)
+{
+	struct lis302dl_info *lis = _lis;
+
+	lis302dl_bitbang_read_sample(lis);
+	return IRQ_HANDLED;
+}
+
+/* sysfs */
+
+static ssize_t show_overruns(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", lis->overruns);
+}
+
+static DEVICE_ATTR(overruns, S_IRUGO, show_overruns, NULL);
+
+static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	u8 ctrl1;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1);
+	local_irq_restore(flags);
+
+	return sprintf(buf, "%d\n", ctrl1 & LIS302DL_CTRL1_DR ? 400 : 100);
+}
+
+static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	if (!strcmp(buf, "400\n")) {
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
+				 LIS302DL_CTRL1_DR);
+		lis->flags |= LIS302DL_F_DR;
+	} else {
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
+				0);
+		lis->flags &= ~LIS302DL_F_DR;
+	}
+	local_irq_restore(flags);
+
+	return count;
+}
+
+static DEVICE_ATTR(sample_rate, S_IRUGO | S_IWUSR, show_rate, set_rate);
+
+static ssize_t show_scale(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	u_int8_t ctrl1;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1);
+	local_irq_restore(flags);
+
+	return sprintf(buf, "%s\n", ctrl1 & LIS302DL_CTRL1_FS ? "9.2" : "2.3");
+}
+
+static ssize_t set_scale(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	if (!strcmp(buf, "9.2\n")) {
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
+				 LIS302DL_CTRL1_FS);
+		lis->flags |= LIS302DL_F_FS;
+	} else {
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
+				0);
+		lis->flags &= ~LIS302DL_F_FS;
+	}
+
+	if (lis->flags & LIS302DL_F_INPUT_OPEN)
+		__enable_data_collection(lis);
+
+	local_irq_restore(flags);
+
+	return count;
+}
+
+static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale);
+
+static ssize_t show_threshold(struct device *dev, struct device_attribute *attr,
+		 char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	/* Display the device view of the threshold setting */
+	return sprintf(buf, "%d\n", __threshold_to_mg(lis,
+			__mg_to_threshold(lis, lis->threshold)));
+}
+
+static ssize_t set_threshold(struct device *dev, struct device_attribute *attr,
+		 const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned int val;
+
+	if (sscanf(buf, "%u\n", &val) != 1)
+		return -EINVAL;
+	/* 8g is the maximum if FS is 1 */
+	if (val > 8000)
+		return -ERANGE;
+
+	/* Set the threshold and write it out if the device is used */
+	lis->threshold = val;
+
+	if (lis->flags & LIS302DL_F_INPUT_OPEN) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		__enable_data_collection(lis);
+		local_irq_restore(flags);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(threshold, S_IRUGO | S_IWUSR, show_threshold, set_threshold);
+
+static ssize_t show_duration(struct device *dev, struct device_attribute *attr,
+		 char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", __duration_to_ms(lis,
+			__ms_to_duration(lis, lis->duration)));
+}
+
+static ssize_t set_duration(struct device *dev, struct device_attribute *attr,
+		 const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned int val;
+
+	if (sscanf(buf, "%u\n", &val) != 1)
+		return -EINVAL;
+	if (val > 2550)
+		return -ERANGE;
+
+	lis->duration = val;
+	if (lis->flags & LIS302DL_F_INPUT_OPEN)
+		__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
+				__ms_to_duration(lis, lis->duration));
+
+	return count;
+}
+
+static DEVICE_ATTR(duration, S_IRUGO | S_IWUSR, show_duration, set_duration);
+
+static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
+								      char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	int n = 0;
+	u8 reg[0x40];
+	char *end = buf;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	for (n = 0; n < sizeof(reg); n++)
+		reg[n] = __reg_read(lis, n);
+
+	local_irq_restore(flags);
+
+	for (n = 0; n < sizeof(reg); n += 16) {
+		hex_dump_to_buffer(reg + n, 16, 16, 1, end, 128, 0);
+		end += strlen(end);
+		*end++ = '\n';
+		*end++ = '\0';
+	}
+
+	return end - buf;
+}
+static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL);
+
+/* Configure freefall/wakeup interrupts */
+static ssize_t set_wakeup_threshold(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned int threshold;
+
+	if (sscanf(buf, "%u\n", &threshold) != 1)
+		return -EINVAL;
+
+	if (threshold > 8000)
+		return -ERANGE;
+
+	/* Zero turns the feature off */
+	if (threshold == 0) {
+		if (lis->flags & LIS302DL_F_IRQ_WAKE) {
+			disable_irq_wake(lis->pdata->interrupt);
+			lis->flags &= ~LIS302DL_F_IRQ_WAKE;
+		}
+
+		return count;
+	}
+
+	lis->wakeup.threshold = threshold;
+
+	if (!(lis->flags & LIS302DL_F_IRQ_WAKE)) {
+		enable_irq_wake(lis->pdata->interrupt);
+		lis->flags |= LIS302DL_F_IRQ_WAKE;
+	}
+
+	return count;
+}
+
+static ssize_t show_wakeup_threshold(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	/* All events off? */
+	if (lis->wakeup.threshold == 0)
+		return sprintf(buf, "off\n");
+
+	return sprintf(buf, "%u\n", lis->wakeup.threshold);
+}
+
+static DEVICE_ATTR(wakeup_threshold, S_IRUGO | S_IWUSR, show_wakeup_threshold,
+		set_wakeup_threshold);
+
+static ssize_t set_wakeup_duration(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	unsigned int duration;
+
+	if (sscanf(buf, "%u\n", &duration) != 1)
+		return -EINVAL;
+
+	if (duration > 2550)
+		return -ERANGE;
+
+	lis->wakeup.duration = duration;
+
+	return count;
+}
+
+static ssize_t show_wakeup_duration(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", lis->wakeup.duration);
+}
+
+static DEVICE_ATTR(wakeup_duration, S_IRUGO | S_IWUSR, show_wakeup_duration,
+		set_wakeup_duration);
+
+static struct attribute *lis302dl_sysfs_entries[] = {
+	&dev_attr_sample_rate.attr,
+	&dev_attr_full_scale.attr,
+	&dev_attr_threshold.attr,
+	&dev_attr_duration.attr,
+	&dev_attr_dump.attr,
+	&dev_attr_wakeup_threshold.attr,
+	&dev_attr_wakeup_duration.attr,
+	&dev_attr_overruns.attr,
+	NULL
+};
+
+static struct attribute_group lis302dl_attr_group = {
+	.name	= NULL,
+	.attrs	= lis302dl_sysfs_entries,
+};
+
+/* input device handling and driver core interaction */
+
+static int lis302dl_input_open(struct input_dev *inp)
+{
+	struct lis302dl_info *lis = input_get_drvdata(inp);
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	__enable_data_collection(lis);
+	lis->flags |= LIS302DL_F_INPUT_OPEN;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static void lis302dl_input_close(struct input_dev *inp)
+{
+	struct lis302dl_info *lis = input_get_drvdata(inp);
+	u_int8_t ctrl1 = LIS302DL_CTRL1_Xen | LIS302DL_CTRL1_Yen |
+			 LIS302DL_CTRL1_Zen;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/* since the input core already serializes access and makes sure we
+	 * only see close() for the close of the last user, we can safely
+	 * disable the data ready events */
+	__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, 0x00);
+	lis->flags &= ~LIS302DL_F_INPUT_OPEN;
+
+	/* however, don't power down the whole device if still needed */
+	if (!(lis->flags & LIS302DL_F_WUP_FF ||
+	      lis->flags & LIS302DL_F_WUP_CLICK)) {
+		__reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD,
+				 0x00);
+	}
+	local_irq_restore(flags);
+}
+
+/* get the device to reload its coefficients from EEPROM and wait for it
+ * to complete
+ */
+
+static int __lis302dl_reset_device(struct lis302dl_info *lis)
+{
+	int timeout = 10;
+
+	__reg_write(lis, LIS302DL_REG_CTRL2,
+			LIS302DL_CTRL2_BOOT | LIS302DL_CTRL2_FDS);
+
+	while ((__reg_read(lis, LIS302DL_REG_CTRL2)
+			& LIS302DL_CTRL2_BOOT) && (timeout--))
+		mdelay(1);
+
+	return !!(timeout < 0);
+}
+
+static int __devinit lis302dl_probe(struct spi_device *spi)
+{
+	int rc;
+	struct lis302dl_info *lis;
+	u_int8_t wai;
+	unsigned long flags;
+	struct lis302dl_platform_data *pdata = spi->dev.platform_data;
+
+	spi->mode = SPI_MODE_3;
+	rc = spi_setup(spi);
+	if (rc < 0) {
+		dev_err(&spi->dev, "spi_setup failed\n");
+		return rc;
+	}
+
+	lis = kzalloc(sizeof(*lis), GFP_KERNEL);
+	if (!lis)
+		return -ENOMEM;
+
+	lis->dev = &spi->dev;
+	lis->spi = spi;
+
+	dev_set_drvdata(lis->dev, lis);
+
+	lis->pdata = pdata;
+
+	rc = sysfs_create_group(&lis->dev->kobj, &lis302dl_attr_group);
+	if (rc) {
+		dev_err(lis->dev, "error creating sysfs group\n");
+		goto bail_free_lis;
+	}
+
+	/* initialize input layer details */
+	lis->input_dev = input_allocate_device();
+	if (!lis->input_dev) {
+		dev_err(lis->dev, "Unable to allocate input device\n");
+		goto bail_sysfs;
+	}
+
+	input_set_drvdata(lis->input_dev, lis);
+	lis->input_dev->name = pdata->name;
+	 /* SPI Bus not defined as a valid bus for input subsystem*/
+	lis->input_dev->id.bustype = BUS_I2C; /* lie about it */
+	lis->input_dev->open = lis302dl_input_open;
+	lis->input_dev->close = lis302dl_input_close;
+
+	rc = input_register_device(lis->input_dev);
+	if (rc) {
+		dev_err(lis->dev, "error %d registering input device\n", rc);
+		goto bail_inp_dev;
+	}
+
+	local_irq_save(flags);
+	/* Configure our IO */
+	(lis->pdata->lis302dl_suspend_io)(lis, 1);
+
+	wai = __reg_read(lis, LIS302DL_REG_WHO_AM_I);
+	if (wai != LIS302DL_WHO_AM_I_MAGIC) {
+		dev_err(lis->dev, "unknown who_am_i signature 0x%02x\n", wai);
+		dev_set_drvdata(lis->dev, NULL);
+		rc = -ENODEV;
+		local_irq_restore(flags);
+		goto bail_inp_reg;
+	}
+
+	set_bit(EV_ABS, lis->input_dev->evbit);
+	input_set_abs_params(lis->input_dev, ABS_X, 0, 0, 0, 0);
+	input_set_abs_params(lis->input_dev, ABS_Y, 0, 0, 0, 0);
+	input_set_abs_params(lis->input_dev, ABS_Z, 0, 0, 0, 0);
+
+	lis->threshold = 0;
+	lis->duration = 0;
+	memset(&lis->wakeup, 0, sizeof(lis->wakeup));
+
+	if (__lis302dl_reset_device(lis))
+		dev_err(lis->dev, "device BOOT reload failed\n");
+
+	/* force us powered */
+	__reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
+			LIS302DL_CTRL1_Xen |
+			LIS302DL_CTRL1_Yen |
+			LIS302DL_CTRL1_Zen);
+	mdelay(1);
+
+	__reg_write(lis, LIS302DL_REG_CTRL2, 0);
+	__reg_write(lis, LIS302DL_REG_CTRL3,
+			LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
+	__reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x0);
+	__reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00);
+	__reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x0);
+
+	/* start off in powered down mode; we power up when someone opens us */
+	__reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen |
+			LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen);
+
+	if (pdata->open_drain)
+		/* switch interrupt to open collector, active-low */
+		__reg_write(lis, LIS302DL_REG_CTRL3,
+				LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
+	else
+		/* push-pull, active-low */
+		__reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_IHL);
+
+	__lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_GND);
+	__lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_GND);
+
+	__reg_read(lis, LIS302DL_REG_STATUS);
+	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
+	__reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
+	__reg_read(lis, LIS302DL_REG_CLICK_SRC);
+	local_irq_restore(flags);
+
+	dev_info(lis->dev, "Found %s\n", pdata->name);
+
+	lis->pdata = pdata;
+
+	set_irq_handler(lis->pdata->interrupt, handle_level_irq);
+
+	rc = request_irq(lis->pdata->interrupt, lis302dl_interrupt,
+			 IRQF_TRIGGER_LOW, "lis302dl", lis);
+
+	if (rc < 0) {
+		dev_err(lis->dev, "error requesting IRQ %d\n",
+			lis->pdata->interrupt);
+		goto bail_inp_reg;
+	}
+	return 0;
+
+bail_inp_reg:
+	input_unregister_device(lis->input_dev);
+bail_inp_dev:
+	input_free_device(lis->input_dev);
+bail_sysfs:
+	sysfs_remove_group(&lis->dev->kobj, &lis302dl_attr_group);
+bail_free_lis:
+	kfree(lis);
+	return rc;
+}
+
+static int __devexit lis302dl_remove(struct spi_device *spi)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
+	unsigned long flags;
+
+	/* Disable interrupts */
+	if (lis->flags & LIS302DL_F_IRQ_WAKE)
+		disable_irq_wake(lis->pdata->interrupt);
+	free_irq(lis->pdata->interrupt, lis);
+
+	/* Reset and power down the device */
+	local_irq_save(flags);
+	__reg_write(lis, LIS302DL_REG_CTRL3, 0x00);
+	__reg_write(lis, LIS302DL_REG_CTRL2, 0x00);
+	__reg_write(lis, LIS302DL_REG_CTRL1, 0x00);
+	local_irq_restore(flags);
+
+	/* Cleanup resources */
+	sysfs_remove_group(&spi->dev.kobj, &lis302dl_attr_group);
+	input_unregister_device(lis->input_dev);
+	if (lis->input_dev)
+		input_free_device(lis->input_dev);
+	dev_set_drvdata(lis->dev, NULL);
+	kfree(lis);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static u8 regs_to_save[] = {
+	LIS302DL_REG_CTRL1,
+	LIS302DL_REG_CTRL2,
+	LIS302DL_REG_CTRL3,
+	LIS302DL_REG_FF_WU_CFG_1,
+	LIS302DL_REG_FF_WU_THS_1,
+	LIS302DL_REG_FF_WU_DURATION_1,
+	LIS302DL_REG_FF_WU_CFG_2,
+	LIS302DL_REG_FF_WU_THS_2,
+	LIS302DL_REG_FF_WU_DURATION_2,
+	LIS302DL_REG_CLICK_CFG,
+	LIS302DL_REG_CLICK_THSY_X,
+	LIS302DL_REG_CLICK_THSZ,
+	LIS302DL_REG_CLICK_TIME_LIMIT,
+	LIS302DL_REG_CLICK_LATENCY,
+	LIS302DL_REG_CLICK_WINDOW,
+
+};
+
+static int lis302dl_suspend(struct spi_device *spi, pm_message_t state)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
+	unsigned long flags;
+	u_int8_t tmp;
+	int n;
+
+	/* determine if we want to wake up from the accel. */
+	if (lis->flags & LIS302DL_F_WUP_CLICK)
+		return 0;
+
+	disable_irq(lis->pdata->interrupt);
+	local_irq_save(flags);
+
+	/*
+	 * When we share SPI over multiple sensors, there is a race here
+	 * that one or more sensors will lose.  In that case, the shared
+	 * SPI bus GPIO will be in sleep mode and partially pulled down.  So
+	 * we explicitly put our IO into "wake" mode here before the final
+	 * traffic to the sensor.
+	 */
+	(lis->pdata->lis302dl_suspend_io)(lis, 1);
+
+	/* save registers */
+	for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
+		lis->regs[regs_to_save[n]] =
+			__reg_read(lis, regs_to_save[n]);
+
+	/* power down or enable wakeup */
+
+	if (lis->wakeup.threshold == 0) {
+		tmp = __reg_read(lis, LIS302DL_REG_CTRL1);
+		tmp &= ~LIS302DL_CTRL1_PD;
+		__reg_write(lis, LIS302DL_REG_CTRL1, tmp);
+	} else
+		__enable_wakeup(lis);
+
+	/* place our IO to the device in sleep-compatible states */
+	(lis->pdata->lis302dl_suspend_io)(lis, 0);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int lis302dl_resume(struct spi_device *spi)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
+	unsigned long flags;
+	int n;
+
+	if (lis->flags & LIS302DL_F_WUP_CLICK)
+		return 0;
+
+	local_irq_save(flags);
+
+	/* get our IO to the device back in operational states */
+	(lis->pdata->lis302dl_suspend_io)(lis, 1);
+
+	/* resume from powerdown first! */
+	__reg_write(lis, LIS302DL_REG_CTRL1,
+			LIS302DL_CTRL1_PD |
+			LIS302DL_CTRL1_Xen |
+			LIS302DL_CTRL1_Yen |
+			LIS302DL_CTRL1_Zen);
+	mdelay(1);
+
+	if (__lis302dl_reset_device(lis))
+		dev_err(&spi->dev, "device BOOT reload failed\n");
+
+	lis->regs[LIS302DL_REG_CTRL1] |=	LIS302DL_CTRL1_PD |
+						LIS302DL_CTRL1_Xen |
+						LIS302DL_CTRL1_Yen |
+						LIS302DL_CTRL1_Zen;
+
+	/* restore registers after resume */
+	for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
+		__reg_write(lis, regs_to_save[n], lis->regs[regs_to_save[n]]);
+
+	/* if someone had us open, reset the non-wake threshold stuff */
+	if (lis->flags & LIS302DL_F_INPUT_OPEN)
+		__enable_data_collection(lis);
+
+	local_irq_restore(flags);
+	enable_irq(lis->pdata->interrupt);
+
+	return 0;
+}
+#else
+#define lis302dl_suspend	NULL
+#define lis302dl_resume		NULL
+#endif
+
+static struct spi_driver lis302dl_spi_driver = {
+	.driver = {
+		.name = "lis302dl",
+		.owner = THIS_MODULE,
+	},
+
+	.probe 	= lis302dl_probe,
+	.remove	= __devexit_p(lis302dl_remove),
+	.suspend = lis302dl_suspend,
+	.resume	 = lis302dl_resume,
+};
+
+static int __devinit lis302dl_init(void)
+{
+	return spi_register_driver(&lis302dl_spi_driver);
+}
+
+static void __exit lis302dl_exit(void)
+{
+	spi_unregister_driver(&lis302dl_spi_driver);
+}
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_LICENSE("GPL");
+
+module_init(lis302dl_init);
+module_exit(lis302dl_exit);
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/s3c2410_ts.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/s3c2410_ts.c
new file mode 100644
index 000000000..f980bfcce
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/s3c2410_ts.c
@@ -0,0 +1,593 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * iPAQ H1940 touchscreen support
+ *
+ * ChangeLog
+ *
+ * 2004-09-05: Herbert Pötzl <herbert@13thfloor.at>
+ *      - added clock (de-)allocation code
+ *
+ * 2005-03-06: Arnaud Patard <arnaud.patard@rtp-net.org>
+ *      - h1940_ -> s3c2410 (this driver is now also used on the n30
+ *        machines :P)
+ *      - Debug messages are now enabled with the config option
+ *        TOUCHSCREEN_S3C2410_DEBUG
+ *      - Changed the way the value are read
+ *      - Input subsystem should now work
+ *      - Use ioremap and readl/writel
+ *
+ * 2005-03-23: Arnaud Patard <arnaud.patard@rtp-net.org>
+ *      - Make use of some undocumented features of the touchscreen
+ *        controller
+ *
+ * 2007-05-23: Harald Welte <laforge@openmoko.org>
+ *      - Add proper support for S32440
+ *
+ * 2008-06-23: Andy Green <andy@openmoko.com>
+ *      - removed averaging system
+ *      - added generic Touchscreen filter stuff
+ *
+ * 2008-11-27: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *      - improve interrupt handling
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/timer.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/ts.h>
+#include <mach/hardware.h>
+#include <plat/regs-adc.h>
+
+#include <linux/touchscreen/ts_filter_chain.h>
+
+/* For ts.dev.id.version */
+#define S3C2410TSVERSION	0x0101
+
+#define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
+
+#define WAIT4INT(x)  (((x)<<8) | \
+		     S3C2410_ADCTSC_YM_SEN | \
+		     S3C2410_ADCTSC_YP_SEN | \
+		     S3C2410_ADCTSC_XP_SEN | \
+		     S3C2410_ADCTSC_XY_PST(3))
+
+#define AUTOPST	     (S3C2410_ADCTSC_YM_SEN | \
+		      S3C2410_ADCTSC_YP_SEN | \
+		      S3C2410_ADCTSC_XP_SEN | \
+		      S3C2410_ADCTSC_AUTO_PST | \
+		      S3C2410_ADCTSC_XY_PST(0))
+
+#define DEBUG_LVL    KERN_DEBUG
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
+MODULE_DESCRIPTION("s3c2410 touchscreen driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+static char *s3c2410ts_name = "s3c2410 TouchScreen";
+
+#define TS_RELEASE_TIMEOUT (HZ >> 7 ? HZ >> 7 : 1) /* 8ms (5ms if HZ is 200) */
+#define TS_EVENT_FIFO_SIZE (2 << 6) /* must be a power of 2 */
+
+#define TS_STATE_STANDBY 0 /* initial state */
+#define TS_STATE_PRESSED 1
+#define TS_STATE_RELEASE_PENDING 2
+#define TS_STATE_RELEASE 3
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct s3c2410ts {
+	struct input_dev *dev;
+	struct ts_filter_chain *chain;
+	int is_down;
+	int state;
+	struct kfifo *event_fifo;
+};
+
+static struct s3c2410ts ts;
+
+static void __iomem *base_addr;
+
+/*
+ * A few low level functions.
+ */
+
+static inline void s3c2410_ts_connect(void)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPG12, S3C2410_GPG12_XMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPG13_nXPON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG14, S3C2410_GPG14_YMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG15, S3C2410_GPG15_nYPON);
+}
+
+static void s3c2410_ts_start_adc_conversion(void)
+{
+	writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+	       base_addr + S3C2410_ADCTSC);
+	writel(readl(base_addr + S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START,
+	       base_addr + S3C2410_ADCCON);
+}
+
+/*
+ * Just send the input events.
+ */
+
+enum ts_input_event {IE_DOWN = 0, IE_UP};
+
+static void ts_input_report(int event, int coords[])
+{
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+	static char *s[] = {"down", "up"};
+	struct timeval tv;
+
+	do_gettimeofday(&tv);
+#endif
+
+	if (event == IE_DOWN) {
+		input_report_abs(ts.dev, ABS_X, coords[0]);
+		input_report_abs(ts.dev, ABS_Y, coords[1]);
+		input_report_key(ts.dev, BTN_TOUCH, 1);
+		input_report_abs(ts.dev, ABS_PRESSURE, 1);
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+		printk(DEBUG_LVL "T:%06d %6s (X:%03d, Y:%03d)\n",
+		       (int)tv.tv_usec, s[event], coords[0], coords[1]);
+#endif
+	} else {
+		input_report_key(ts.dev, BTN_TOUCH, 0);
+		input_report_abs(ts.dev, ABS_PRESSURE, 0);
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+		printk(DEBUG_LVL "T:%06d %6s\n",
+		       (int)tv.tv_usec, s[event]);
+#endif
+	}
+
+	input_sync(ts.dev);
+}
+
+/*
+ * Manage the state of the touchscreen.
+ */
+
+static void event_send_timer_f(unsigned long data);
+
+static struct timer_list event_send_timer =
+		TIMER_INITIALIZER(event_send_timer_f, 0, 0);
+
+static void event_send_timer_f(unsigned long data)
+{
+	static int noop_counter;
+	int event_type;
+
+	while (__kfifo_get(ts.event_fifo, (unsigned char *)&event_type,
+			   sizeof(int))) {
+		int buf[2];
+
+		switch (event_type) {
+		case 'D':
+			if (ts.state == TS_STATE_RELEASE_PENDING)
+				/* Ignore short UP event */
+				ts.state = TS_STATE_PRESSED;
+			break;
+
+		case 'U':
+			ts.state = TS_STATE_RELEASE_PENDING;
+			break;
+
+		case 'P':
+			if (ts.is_down) /* stylus_action needs a conversion */
+				s3c2410_ts_start_adc_conversion();
+
+			if (unlikely(__kfifo_get(ts.event_fifo,
+						 (unsigned char *)buf,
+						 sizeof(int) * 2)
+				     != sizeof(int) * 2))
+				goto ts_exit_error;
+
+			ts_input_report(IE_DOWN, buf);
+			ts.state = TS_STATE_PRESSED;
+			break;
+
+		default:
+			goto ts_exit_error;
+		}
+
+		noop_counter = 0;
+	}
+
+	if (noop_counter++ >= 1) {
+		noop_counter = 0;
+		if (ts.state == TS_STATE_RELEASE_PENDING) {
+			/*
+			 * We delay the UP event for a while to avoid jitter.
+			 * If we get a DOWN event we do not send it.
+			 */
+			ts_input_report(IE_UP, NULL);
+			ts.state = TS_STATE_STANDBY;
+
+			ts_filter_chain_clear(ts.chain);
+		}
+	} else {
+		mod_timer(&event_send_timer, jiffies + TS_RELEASE_TIMEOUT);
+	}
+
+	return;
+
+ts_exit_error: /* should not happen unless we have a bug */
+	printk(KERN_ERR __FILE__ ": event_send_timer_f failed\n");
+}
+
+/*
+ * Manage interrupts.
+ */
+
+static irqreturn_t stylus_updown(int irq, void *dev_id)
+{
+	unsigned long data0;
+	unsigned long data1;
+	int event_type;
+
+	data0 = readl(base_addr+S3C2410_ADCDAT0);
+	data1 = readl(base_addr+S3C2410_ADCDAT1);
+
+	ts.is_down = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) &&
+					    (!(data1 & S3C2410_ADCDAT0_UPDOWN));
+
+	event_type = ts.is_down ? 'D' : 'U';
+
+	if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)&event_type,
+		     sizeof(int)) != sizeof(int))) /* should not happen */
+		printk(KERN_ERR __FILE__": stylus_updown lost event!\n");
+
+	if (ts.is_down)
+		s3c2410_ts_start_adc_conversion();
+	else
+		writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
+
+	mod_timer(&event_send_timer, jiffies + 1);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t stylus_action(int irq, void *dev_id)
+{
+	int buf[3];
+
+	/* Grab the ADC results. */
+	buf[1] = readl(base_addr + S3C2410_ADCDAT0) &
+		       S3C2410_ADCDAT0_XPDATA_MASK;
+	buf[2] = readl(base_addr + S3C2410_ADCDAT1) &
+		       S3C2410_ADCDAT1_YPDATA_MASK;
+
+	switch (ts_filter_chain_feed(ts.chain, &buf[1])) {
+	case 0:
+		/* The filter wants more points. */
+		s3c2410_ts_start_adc_conversion();
+		return IRQ_HANDLED;
+	case 1:
+		/* We have a point from the filters or no filtering enabled. */
+		buf[0] = 'P';
+		break;
+	default:
+		printk(KERN_ERR __FILE__
+		       ":%d Invalid ts_filter_chain_feed return value.\n",
+		       __LINE__);
+	case -1:
+		/* Error. Ignore the event. */
+		ts_filter_chain_clear(ts.chain);
+		writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
+		return IRQ_HANDLED;
+	};
+
+	if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)buf,
+		     sizeof(int) * 3) != sizeof(int) * 3))
+		printk(KERN_ERR __FILE__":stylus_action bug.\n");
+
+	writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
+	mod_timer(&event_send_timer, jiffies + 1);
+
+	return IRQ_HANDLED;
+}
+
+static struct clk	*adc_clock;
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init s3c2410ts_probe(struct platform_device *pdev)
+{
+	int rc;
+	struct s3c2410_ts_mach_info *info;
+	struct input_dev *input_dev;
+	int ret = 0;
+
+	dev_info(&pdev->dev, "Starting\n");
+
+	info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
+
+	if (!info)
+	{
+		dev_err(&pdev->dev, "Hm... too bad: no platform data for ts\n");
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+	printk(DEBUG_LVL "Entering s3c2410ts_init\n");
+#endif
+
+	adc_clock = clk_get(NULL, "adc");
+	if (!adc_clock) {
+		dev_err(&pdev->dev, "failed to get adc clock source\n");
+		return -ENOENT;
+	}
+	clk_enable(adc_clock);
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+	printk(DEBUG_LVL "got and enabled clock\n");
+#endif
+
+	base_addr = ioremap(S3C2410_PA_ADC,0x20);
+	if (base_addr == NULL) {
+		dev_err(&pdev->dev, "Failed to remap register block\n");
+		ret = -ENOMEM;
+		goto bail0;
+	}
+
+
+	/* If we acutally are a S3C2410: Configure GPIOs */
+	if (!strcmp(pdev->name, "s3c2410-ts"))
+		s3c2410_ts_connect();
+
+	if ((info->presc & 0xff) > 0)
+		writel(S3C2410_ADCCON_PRSCEN |
+		       S3C2410_ADCCON_PRSCVL(info->presc&0xFF),
+						    base_addr + S3C2410_ADCCON);
+	else
+		writel(0, base_addr+S3C2410_ADCCON);
+
+	/* Initialise registers */
+	if ((info->delay & 0xffff) > 0)
+		writel(info->delay & 0xffff,  base_addr + S3C2410_ADCDLY);
+
+	writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
+
+	/* Initialise input stuff */
+	memset(&ts, 0, sizeof(struct s3c2410ts));
+	input_dev = input_allocate_device();
+
+	if (!input_dev) {
+		dev_err(&pdev->dev, "Unable to allocate the input device\n");
+		ret = -ENOMEM;
+		goto bail1;
+	}
+
+	ts.dev = input_dev;
+	ts.dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) |
+			   BIT_MASK(EV_ABS);
+	ts.dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(ts.dev, ABS_X, 0, 0x3FF, 0, 0);
+	input_set_abs_params(ts.dev, ABS_Y, 0, 0x3FF, 0, 0);
+	input_set_abs_params(ts.dev, ABS_PRESSURE, 0, 1, 0, 0);
+
+	ts.dev->name = s3c2410ts_name;
+	ts.dev->id.bustype = BUS_RS232;
+	ts.dev->id.vendor = 0xDEAD;
+	ts.dev->id.product = 0xBEEF;
+	ts.dev->id.version = S3C2410TSVERSION;
+	ts.state = TS_STATE_STANDBY;
+	ts.event_fifo = kfifo_alloc(TS_EVENT_FIFO_SIZE, GFP_KERNEL, NULL);
+	if (IS_ERR(ts.event_fifo)) {
+		ret = -EIO;
+		goto bail2;
+	}
+
+	/* create the filter chain set up for the 2 coordinates we produce */
+	ts.chain = ts_filter_chain_create(pdev, info->filter_config, 2);
+
+	if (IS_ERR(ts.chain))
+		goto bail2;
+
+	ts_filter_chain_clear(ts.chain);
+
+	/* Get irqs */
+	if (request_irq(IRQ_ADC, stylus_action, IRQF_SAMPLE_RANDOM,
+						    "s3c2410_action", ts.dev)) {
+		dev_err(&pdev->dev, "Could not allocate ts IRQ_ADC !\n");
+		iounmap(base_addr);
+		ret = -EIO;
+		goto bail3;
+	}
+	if (request_irq(IRQ_TC, stylus_updown, IRQF_SAMPLE_RANDOM,
+			"s3c2410_action", ts.dev)) {
+		dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n");
+		free_irq(IRQ_ADC, ts.dev);
+		iounmap(base_addr);
+		ret = -EIO;
+		goto bail4;
+	}
+
+	dev_info(&pdev->dev, "Successfully loaded\n");
+
+	/* All went ok, so register to the input system */
+	rc = input_register_device(ts.dev);
+	if (rc) {
+		ret = -EIO;
+		goto bail5;
+	}
+
+	return 0;
+
+bail5:
+	free_irq(IRQ_TC, ts.dev);
+	free_irq(IRQ_ADC, ts.dev);
+	clk_disable(adc_clock);
+	iounmap(base_addr);
+	disable_irq(IRQ_TC);
+bail4:
+	disable_irq(IRQ_ADC);
+bail3:
+	ts_filter_chain_destroy(ts.chain);
+	kfifo_free(ts.event_fifo);
+bail2:
+	input_unregister_device(ts.dev);
+bail1:
+	iounmap(base_addr);
+bail0:
+
+	return ret;
+}
+
+static int s3c2410ts_remove(struct platform_device *pdev)
+{
+	disable_irq(IRQ_ADC);
+	disable_irq(IRQ_TC);
+	free_irq(IRQ_TC,ts.dev);
+	free_irq(IRQ_ADC,ts.dev);
+
+	if (adc_clock) {
+		clk_disable(adc_clock);
+		clk_put(adc_clock);
+		adc_clock = NULL;
+	}
+
+	input_unregister_device(ts.dev);
+	iounmap(base_addr);
+
+	ts_filter_chain_destroy(ts.chain);
+
+	kfifo_free(ts.event_fifo);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	writel(TSC_SLEEP, base_addr+S3C2410_ADCTSC);
+	writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_STDBM,
+	       base_addr+S3C2410_ADCCON);
+
+	disable_irq(IRQ_ADC);
+	disable_irq(IRQ_TC);
+
+	clk_disable(adc_clock);
+
+	return 0;
+}
+
+static int s3c2410ts_resume(struct platform_device *pdev)
+{
+	struct s3c2410_ts_mach_info *info =
+		( struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
+
+	clk_enable(adc_clock);
+	mdelay(1);
+
+	ts_filter_chain_clear(ts.chain);
+
+	enable_irq(IRQ_ADC);
+	enable_irq(IRQ_TC);
+
+	if ((info->presc&0xff) > 0)
+		writel(S3C2410_ADCCON_PRSCEN |
+		       S3C2410_ADCCON_PRSCVL(info->presc&0xFF),
+						      base_addr+S3C2410_ADCCON);
+	else
+		writel(0,base_addr+S3C2410_ADCCON);
+
+	/* Initialise registers */
+	if ((info->delay & 0xffff) > 0)
+		writel(info->delay & 0xffff,  base_addr+S3C2410_ADCDLY);
+
+	writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
+
+	return 0;
+}
+
+#else
+#define s3c2410ts_suspend NULL
+#define s3c2410ts_resume  NULL
+#endif
+
+static struct platform_driver s3c2410ts_driver = {
+       .driver         = {
+	       .name   = "s3c2410-ts",
+	       .owner  = THIS_MODULE,
+       },
+       .probe          = s3c2410ts_probe,
+       .remove         = s3c2410ts_remove,
+       .suspend        = s3c2410ts_suspend,
+       .resume         = s3c2410ts_resume,
+
+};
+
+static struct platform_driver s3c2440ts_driver = {
+       .driver         = {
+	       .name   = "s3c2440-ts",
+	       .owner  = THIS_MODULE,
+       },
+       .probe          = s3c2410ts_probe,
+       .remove         = s3c2410ts_remove,
+       .suspend        = s3c2410ts_suspend,
+       .resume         = s3c2410ts_resume,
+
+};
+
+static int __init s3c2410ts_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&s3c2410ts_driver);
+	if (rc < 0)
+		return rc;
+
+	rc = platform_driver_register(&s3c2440ts_driver);
+	if (rc < 0)
+		platform_driver_unregister(&s3c2410ts_driver);
+
+	return rc;
+}
+
+static void __exit s3c2410ts_exit(void)
+{
+	platform_driver_unregister(&s3c2440ts_driver);
+	platform_driver_unregister(&s3c2410ts_driver);
+}
+
+module_init(s3c2410ts_init);
+module_exit(s3c2410ts_exit);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_chain.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_chain.c
new file mode 100644
index 000000000..e6bb38270
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_chain.c
@@ -0,0 +1,183 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008,2009 Andy Green <andy@openmoko.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include <linux/touchscreen/ts_filter_chain.h>
+#include <linux/touchscreen/ts_filter.h>
+
+/*
+ * Tux, would you like the following function in /lib?
+ * It helps us avoid silly code.
+ */
+
+/**
+ * sptrlen - Count how many non-null pointers are in a pointer array
+ * @arr: The array of pointers
+ */
+static int sptrlen(const void *arr)
+{
+	/* All pointers have the same size. */
+	const int **p = (const int **)arr;
+	int len = 0;
+
+	while (*(p++))
+		len++;
+
+	return len;
+}
+
+
+struct ts_filter_chain {
+	/* All of the filters. */
+	struct ts_filter **arr;
+	/* Filters that can propagate values in the chain. */
+	struct ts_filter **pchain;
+	/* Length of the pchain array. */
+	int pchain_len;
+	/* FIXME: Add a spinlock and use it. */
+};
+
+struct ts_filter_chain *ts_filter_chain_create(
+	struct platform_device *pdev,
+	const struct ts_filter_chain_configuration conf[],
+	int count_coords)
+{
+	struct ts_filter_chain *c;
+	int count = 0;
+	int len;
+
+	BUG_ON((count_coords < 1));
+	BUG_ON(count_coords > MAX_TS_FILTER_COORDS);
+
+	c = kzalloc(sizeof(struct ts_filter_chain), GFP_KERNEL);
+	if (!c)
+		goto create_err_1;
+
+	len = (sptrlen(conf) + 1);
+	/* Memory for two null-terminated arrays of filters. */
+	c->arr = kzalloc(2 * sizeof(struct ts_filter *) * len, GFP_KERNEL);
+	if (!c->arr)
+		goto create_err_1;
+	c->pchain = c->arr + len;
+
+	while (conf->api) {
+		/* TODO: Can we get away with only sending pdev->dev? */
+		struct ts_filter *f =
+			(conf->api->create)(pdev, conf->config, count_coords);
+		if (!f) {
+			dev_info(&pdev->dev, "Filter %d creation failed\n",
+				 count);
+			goto create_err_2;
+		}
+
+		f->api = conf->api;
+		c->arr[count++] = f;
+
+		if (f->api->haspoint && f->api->getpoint && f->api->process)
+			c->pchain[c->pchain_len++] = f;
+
+		conf++;
+	}
+
+	dev_info(&pdev->dev, "%d filter(s) initialized\n", count);
+
+	return c;
+
+create_err_2:
+	ts_filter_chain_destroy(c); /* Also frees c. */
+create_err_1:
+	dev_info(&pdev->dev, "Error in filter chain initialization\n");
+	/*
+	 * FIXME: Individual filters have to return errors this way.
+	 * We only have to forward the errors we find.
+	 */
+	return ERR_PTR(-ENOMEM);
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_create);
+
+void ts_filter_chain_destroy(struct ts_filter_chain *c)
+{
+	if (c->arr) {
+		struct ts_filter **a = c->arr;
+		while (*a) {
+			((*a)->api->destroy)(*a);
+			a++;
+		}
+		kfree(c->arr);
+	}
+	kfree(c);
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_destroy);
+
+void ts_filter_chain_clear(struct ts_filter_chain *c)
+{
+	struct ts_filter **a = c->arr;
+
+	while (*a) {
+		if ((*a)->api->clear)
+			((*a)->api->clear)(*a);
+		a++;
+	}
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_clear);
+
+static void ts_filter_chain_scale(struct ts_filter_chain *c, int *coords)
+{
+	struct ts_filter **a = c->arr;
+	while (*a) {
+		if ((*a)->api->scale)
+			((*a)->api->scale)(*a, coords);
+		a++;
+	}
+}
+
+int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords)
+{
+	int len = c->pchain_len;
+	int i = len - 1;
+
+	if (!c->pchain[0])
+		return 1; /* Nothing to do. */
+
+	BUG_ON(c->pchain[0]->api->haspoint(c->pchain[0]));
+
+	if (c->pchain[0]->api->process(c->pchain[0], coords))
+		return -1;
+
+	while (i >= 0 && i < len) {
+		if (c->pchain[i]->api->haspoint(c->pchain[i])) {
+			c->pchain[i]->api->getpoint(c->pchain[i], coords);
+			if (++i < len &&
+			    c->pchain[i]->api->process(c->pchain[i], coords))
+				return -1; /* Error. */
+		} else {
+			i--;
+		}
+	}
+
+	if (i >= 0) {	/* Same as i == len. */
+		ts_filter_chain_scale(c, coords);
+		return 1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_feed);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_group.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_group.c
new file mode 100644
index 000000000..f53f16daf
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_group.c
@@ -0,0 +1,296 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * All rights reserved.
+ *
+ *
+ * This filter is useful to reject samples that are not reliable. We consider
+ * that a sample is not reliable if it deviates form the Majority.
+ *
+ * 1) We collect S samples.
+ *
+ * 2) For each dimension:
+ *
+ *  - We sort the points.
+ *  - Points that are "close enough" are considered to be in the same set.
+ *  - We choose the set with more elements. If more than "threshold"
+ *    points are in this set we use the first and the last point of the set
+ *    to define the valid range for this dimension [min, max], otherwise we
+ *    discard all the points and go to step 1.
+ *
+ * 3) We consider the unsorted S samples and try to feed them to the next
+ *    filter in the chain. If one of the points of each sample
+ *    is not in the allowed range for its dimension, we discard the sample.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/touchscreen/ts_filter_group.h>
+
+struct ts_filter_group {
+	/* Private filter configuration. */
+	struct ts_filter_group_configuration *config;
+	/* Filter API. */
+	struct ts_filter tsf;
+
+	int N;			/* How many samples we have. */
+	int *samples[MAX_TS_FILTER_COORDS];	/* The samples: our input. */
+
+	int *group_size;	/* Used for temporal computations. */
+	int *sorted_samples;	/* Used for temporal computations. */
+
+	int range_max[MAX_TS_FILTER_COORDS];	/* Max. computed ranges. */
+	int range_min[MAX_TS_FILTER_COORDS];	/* Min. computed ranges. */
+
+	int tries_left;		/* We finish if we don't get enough samples. */
+	int ready;		/* If we are ready to deliver samples. */
+	int result;		/* Index of the point being returned. */
+};
+
+#define ts_filter_to_filter_group(f) \
+	container_of(f, struct ts_filter_group, tsf)
+
+
+static void ts_filter_group_clear_internal(struct ts_filter_group *tsfg,
+					   int attempts)
+{
+	tsfg->N = 0;
+	tsfg->tries_left = attempts;
+	tsfg->ready = 0;
+	tsfg->result = 0;
+}
+
+static void ts_filter_group_clear(struct ts_filter *tsf)
+{
+	struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+
+	ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
+}
+
+static struct ts_filter *ts_filter_group_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	struct ts_filter_group *tsfg;
+	int i;
+
+	tsfg = kzalloc(sizeof(struct ts_filter_group), GFP_KERNEL);
+	if (!tsfg)
+		return NULL;
+
+	tsfg->config = container_of(conf,
+				    struct ts_filter_group_configuration,
+				    config);
+	tsfg->tsf.count_coords = count_coords;
+
+	BUG_ON(tsfg->config->attempts <= 0);
+
+	tsfg->samples[0] = kmalloc((2 + count_coords) * sizeof(int) *
+				   tsfg->config->length, GFP_KERNEL);
+	if (!tsfg->samples[0]) {
+		kfree(tsfg);
+		return NULL;
+	}
+	for (i = 1; i < count_coords; ++i)
+		tsfg->samples[i] = tsfg->samples[0] + i * tsfg->config->length;
+	tsfg->sorted_samples = tsfg->samples[0] + count_coords *
+			       tsfg->config->length;
+	tsfg->group_size = tsfg->samples[0] + (1 + count_coords) *
+			       tsfg->config->length;
+
+	ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
+
+	dev_info(&pdev->dev, "Created Group filter len:%d coords:%d close:%d "
+		 "thresh:%d\n", tsfg->config->length, count_coords,
+		 tsfg->config->close_enough, tsfg->config->threshold);
+
+	return &tsfg->tsf;
+}
+
+static void ts_filter_group_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+
+	kfree(tsfg->samples[0]); /* first guy has pointer from kmalloc */
+	kfree(tsf);
+}
+
+static int int_cmp(const void *_a, const void *_b)
+{
+	const int *a = _a;
+	const int *b = _b;
+
+	if (*a > *b)
+		return 1;
+	if (*a < *b)
+		return -1;
+	return 0;
+}
+
+static void ts_filter_group_prepare_next(struct ts_filter *tsf);
+
+static int ts_filter_group_process(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+	int n;
+	int i;
+
+	BUG_ON(tsfg->N >= tsfg->config->length);
+	BUG_ON(tsfg->ready);
+
+	for (n = 0; n < tsf->count_coords; n++)
+		tsfg->samples[n][tsfg->N] = coords[n];
+
+	if (++tsfg->N < tsfg->config->length)
+		return 0;	/* We need more samples. */
+
+	for (n = 0; n < tsfg->tsf.count_coords; n++) {
+		int *v = tsfg->sorted_samples;
+		int ngroups = 0;
+		int best_size;
+		int best_idx = 0;
+		int idx = 0;
+
+		memcpy(v, tsfg->samples[n], tsfg->N * sizeof(int));
+		/*
+		 * FIXME: Remove this sort call. We already have the
+		 * algorithm for this modification. The filter will
+		 * need less points (about half) if there is not a
+		 * lot of noise. Right now we are doing a constant
+		 * amount of work no matter how much noise we are
+		 * dealing with.
+		 */
+		sort(v, tsfg->N, sizeof(int), int_cmp, NULL);
+
+		tsfg->group_size[0] = 1;
+		for (i = 1; i < tsfg->N; ++i) {
+			if (v[i] - v[i - 1] <= tsfg->config->close_enough)
+				tsfg->group_size[ngroups]++;
+			else
+				tsfg->group_size[++ngroups] = 1;
+		}
+		ngroups++;
+
+		best_size = tsfg->group_size[0];
+		for (i = 1; i < ngroups; i++) {
+			idx += tsfg->group_size[i - 1];
+			if (best_size < tsfg->group_size[i]) {
+				best_size = tsfg->group_size[i];
+				best_idx = idx;
+			}
+		}
+
+		if (best_size < tsfg->config->threshold) {
+			/* This set is not good enough for us. */
+			if (--tsfg->tries_left) {
+				ts_filter_group_clear_internal
+					(tsfg, tsfg->tries_left);
+				/* No errors but we need more samples. */
+				return 0;
+			}
+			return 1; /* We give up: error. */
+		}
+
+		tsfg->range_min[n] = v[best_idx];
+		tsfg->range_max[n] = v[best_idx + best_size - 1];
+	}
+
+	ts_filter_group_prepare_next(tsf);
+
+	return 0;
+}
+
+/*
+ * This private function prepares a point that will be returned
+ * in ts_filter_group_getpoint if it is available. It updates
+ * the priv->ready state also.
+ */
+static void ts_filter_group_prepare_next(struct ts_filter *tsf)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+	int n;
+
+	while (priv->result < priv->N) {
+		for (n = 0; n < priv->tsf.count_coords; ++n) {
+			if (priv->samples[n][priv->result] <
+			    priv->range_min[n] ||
+			    priv->samples[n][priv->result] > priv->range_max[n])
+				break;
+		}
+
+		if (n == priv->tsf.count_coords) /* Sample is OK. */
+			break;
+
+		priv->result++;
+	}
+
+	if (unlikely(priv->result >= priv->N)) { /* No sample to deliver. */
+		ts_filter_group_clear_internal(priv, priv->config->attempts);
+		priv->ready = 0;
+	} else {
+		priv->ready = 1;
+	}
+}
+
+static int ts_filter_group_haspoint(struct ts_filter *tsf)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+
+	return priv->ready;
+}
+
+static void ts_filter_group_getpoint(struct ts_filter *tsf, int *point)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+	int n;
+
+	BUG_ON(!priv->ready);
+
+	for (n = 0; n < priv->tsf.count_coords; n++)
+		point[n] = priv->samples[n][priv->result];
+
+	priv->result++;
+
+	/* This call will update priv->ready. */
+	ts_filter_group_prepare_next(tsf);
+}
+
+/*
+ * Get ready to process the next batch of points, forget
+ * points we could have delivered.
+ */
+static void ts_filter_group_scale(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+
+	ts_filter_group_clear_internal(priv, priv->config->attempts);
+}
+
+const struct ts_filter_api ts_filter_group_api = {
+	.create =	ts_filter_group_create,
+	.destroy =	ts_filter_group_destroy,
+	.clear =	ts_filter_group_clear,
+	.process =	ts_filter_group_process,
+	.haspoint =	ts_filter_group_haspoint,
+	.getpoint =	ts_filter_group_getpoint,
+	.scale =	ts_filter_group_scale,
+};
+EXPORT_SYMBOL_GPL(ts_filter_group_api);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_linear.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_linear.c
new file mode 100644
index 000000000..0a595c599
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_linear.c
@@ -0,0 +1,212 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * All rights reserved.
+ *
+ * Linearly scale touchscreen values.
+ *
+ * Expose the TS_FILTER_LINEAR_NCONSTANTS for the linear transformation
+ * using sysfs.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <linux/touchscreen/ts_filter_linear.h>
+
+struct ts_filter_linear;
+
+/* Sysfs code. */
+
+struct const_obj {
+	/* The actual private object. */
+	struct ts_filter_linear *tsfl;
+	/* Our kobject. */
+	struct kobject kobj;
+};
+
+#define to_const_obj(x) container_of(x, struct const_obj, kobj)
+
+struct const_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct const_obj *const, struct const_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct const_obj *const, struct const_attribute *attr,
+			 const char *buf, size_t count);
+};
+
+#define to_const_attr(x) container_of(x, struct const_attribute, attr)
+
+
+/* Private linear filter structure. */
+
+struct ts_filter_linear {
+	/* Private configuration for this filter. */
+	struct ts_filter_linear_configuration *config;
+
+	/* Generic filter API. */
+	struct ts_filter tsf;
+
+	/* Linear constants for the transformation. */
+	int constants[TS_FILTER_LINEAR_NCONSTANTS];
+
+	/* Sysfs. */
+
+	/* Our const_object. */
+	struct const_obj c_obj;
+	/* Our type. We will stick operations to it. */
+	struct kobj_type const_ktype;
+	/* Attrs. of the virtual files. */
+	struct const_attribute kattrs[TS_FILTER_LINEAR_NCONSTANTS];
+	/* Default Attrs. Always NULL for us. */
+	struct attribute *attrs[TS_FILTER_LINEAR_NCONSTANTS + 1];
+	/* Storage for the name of the virtual files. */
+	char attr_names[TS_FILTER_LINEAR_NCONSTANTS][2];
+};
+
+#define ts_filter_to_filter_linear(f) \
+	container_of(f, struct ts_filter_linear, tsf)
+
+/* Sysfs functions. */
+
+static ssize_t const_attr_show(struct kobject *kobj,
+			       struct attribute *attr,
+			       char *buf)
+{
+	struct const_attribute *a = to_const_attr(attr);
+
+	return a->show(to_const_obj(kobj), a, buf);
+}
+
+static ssize_t const_attr_store(struct kobject *kobj,
+				struct attribute *attr,
+				const char *buf, size_t len)
+{
+	struct const_attribute *a = to_const_attr(attr);
+
+	return a->store(to_const_obj(kobj), a, buf, len);
+}
+
+static struct sysfs_ops const_sysfs_ops = {
+	.show =		const_attr_show,
+	.store =	const_attr_store,
+};
+
+static void const_release(struct kobject *kobj)
+{
+	kfree(to_const_obj(kobj)->tsfl);
+}
+
+static ssize_t const_show(struct const_obj *obj, struct const_attribute *attr,
+			  char *buf)
+{
+	int who;
+
+	sscanf(attr->attr.name, "%d", &who);
+	return sprintf(buf, "%d\n", obj->tsfl->constants[who]);
+}
+
+static ssize_t const_store(struct const_obj *obj, struct const_attribute *attr,
+			   const char *buf, size_t count)
+{
+	int who;
+
+	sscanf(attr->attr.name, "%d", &who);
+	sscanf(buf, "%d", &obj->tsfl->constants[who]);
+	return count;
+}
+
+/* Filter functions. */
+
+static struct ts_filter *ts_filter_linear_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	struct ts_filter_linear *tsfl;
+	int i;
+	int ret;
+
+	tsfl = kzalloc(sizeof(struct ts_filter_linear), GFP_KERNEL);
+	if (!tsfl)
+		return NULL;
+
+	tsfl->config = container_of(conf,
+				    struct ts_filter_linear_configuration,
+				    config);
+
+	tsfl->tsf.count_coords = count_coords;
+
+	for (i = 0; i < TS_FILTER_LINEAR_NCONSTANTS; ++i) {
+		tsfl->constants[i] = tsfl->config->constants[i];
+
+		/* sysfs */
+		sprintf(tsfl->attr_names[i], "%d", i);
+		tsfl->kattrs[i].attr.name = tsfl->attr_names[i];
+		tsfl->kattrs[i].attr.mode = 0666;
+		tsfl->kattrs[i].show = const_show;
+		tsfl->kattrs[i].store = const_store;
+		tsfl->attrs[i] = &tsfl->kattrs[i].attr;
+	}
+	tsfl->attrs[i] = NULL;
+
+	tsfl->const_ktype.sysfs_ops = &const_sysfs_ops;
+	tsfl->const_ktype.release = const_release;
+	tsfl->const_ktype.default_attrs = tsfl->attrs;
+	tsfl->c_obj.tsfl = tsfl; /* kernel frees tsfl in const_release */
+
+	ret = kobject_init_and_add(&tsfl->c_obj.kobj, &tsfl->const_ktype,
+				   &pdev->dev.kobj, "calibration");
+	if (ret) {
+		kobject_put(&tsfl->c_obj.kobj);
+		return NULL;
+	}
+
+	dev_info(&pdev->dev, "Created Linear filter coords:%d\n", count_coords);
+
+	return &tsfl->tsf;
+}
+
+static void ts_filter_linear_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
+
+	/* Kernel frees tsfl in const_release. */
+	kobject_put(&tsfl->c_obj.kobj);
+}
+
+static void ts_filter_linear_scale(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
+
+	int *k = tsfl->constants;
+	int c0 = coords[tsfl->config->coord0];
+	int c1 = coords[tsfl->config->coord1];
+
+	coords[tsfl->config->coord0] = (k[2] + k[0] * c0 + k[1] * c1) / k[6];
+	coords[tsfl->config->coord1] = (k[5] + k[3] * c0 + k[4] * c1) / k[6];
+}
+
+const struct ts_filter_api ts_filter_linear_api = {
+	.create =	ts_filter_linear_create,
+	.destroy =	ts_filter_linear_destroy,
+	.scale =	ts_filter_linear_scale,
+};
+EXPORT_SYMBOL_GPL(ts_filter_linear_api);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_mean.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_mean.c
new file mode 100644
index 000000000..8b85f676f
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_mean.c
@@ -0,0 +1,174 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008,2009
+ *       Andy Green <andy@openmoko.com>
+ *       Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ * Simple mean filter.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <linux/touchscreen/ts_filter_mean.h>
+
+struct ts_filter_mean {
+	/* Copy of the private filter configuration. */
+	struct ts_filter_mean_configuration *config;
+	/* Filter API. */
+	struct ts_filter tsf;
+
+	/* Index on a circular buffer. */
+	int curr;
+	/* Useful to tell if the circular buffer is full(read:ready). */
+	int count;
+	/* Sumation used to compute the mean. */
+	int sum[MAX_TS_FILTER_COORDS];
+	/* Keep point values and decrement them from the sum on time. */
+	int *fifo[MAX_TS_FILTER_COORDS];
+	/* Store the output of this filter. */
+	int ready;
+};
+
+#define ts_filter_to_filter_mean(f) container_of(f, struct ts_filter_mean, tsf)
+
+
+static void ts_filter_mean_clear(struct ts_filter *tsf);
+
+static struct ts_filter *ts_filter_mean_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	struct ts_filter_mean *priv;
+	int *v;
+	int n;
+
+	priv = kzalloc(sizeof(struct ts_filter_mean), GFP_KERNEL);
+	if (!priv)
+		return NULL;
+
+	priv->tsf.count_coords = count_coords;
+	priv->config = container_of(conf,
+				    struct ts_filter_mean_configuration,
+				    config);
+
+	BUG_ON(priv->config->length <= 0);
+
+	v = kmalloc(priv->config->length * sizeof(int) * count_coords,
+		    GFP_KERNEL);
+	if (!v)
+		return NULL;
+
+	for (n = 0; n < count_coords; n++) {
+		priv->fifo[n] = v;
+		v += priv->config->length;
+	}
+
+	ts_filter_mean_clear(&priv->tsf);
+
+	dev_info(&pdev->dev, "Created Mean filter len:%d coords:%d\n",
+		 priv->config->length, count_coords);
+
+	return &priv->tsf;
+}
+
+static void ts_filter_mean_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	kfree(priv->fifo[0]); /* first guy has pointer from kmalloc */
+	kfree(tsf);
+}
+
+static void ts_filter_mean_clear(struct ts_filter *tsf)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	priv->count = 0;
+	priv->curr = 0;
+	priv->ready = 0;
+	memset(priv->sum, 0, tsf->count_coords * sizeof(int));
+}
+
+static int ts_filter_mean_process(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+	int n;
+
+	BUG_ON(priv->ready);
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		priv->sum[n] += coords[n];
+		priv->fifo[n][priv->curr] = coords[n];
+	}
+
+	if (priv->count + 1 == priv->config->length)
+		priv->ready = 1;
+	else
+		priv->count++;
+
+	priv->curr = (priv->curr + 1) % priv->config->length;
+
+	return 0; /* No error. */
+}
+
+static int ts_filter_mean_haspoint(struct ts_filter *tsf)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	return priv->ready;
+}
+
+static void ts_filter_mean_getpoint(struct ts_filter *tsf, int *point)
+{
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+	int n;
+
+	BUG_ON(!priv->ready);
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		point[n] = priv->sum[n];
+		priv->sum[n] -= priv->fifo[n][priv->curr];
+	}
+
+	priv->ready = 0;
+}
+
+static void ts_filter_mean_scale(struct ts_filter *tsf, int *coords)
+{
+	int n;
+	struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		coords[n] += priv->config->length >> 1; /* Rounding. */
+		coords[n] /= priv->config->length;
+	}
+}
+
+const struct ts_filter_api ts_filter_mean_api = {
+	.create =	ts_filter_mean_create,
+	.destroy =	ts_filter_mean_destroy,
+	.clear =	ts_filter_mean_clear,
+	.process =	ts_filter_mean_process,
+	.scale =	ts_filter_mean_scale,
+	.haspoint =	ts_filter_mean_haspoint,
+	.getpoint =	ts_filter_mean_getpoint,
+};
+EXPORT_SYMBOL_GPL(ts_filter_mean_api);
+
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_median.c b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_median.c
new file mode 100644
index 000000000..4c230f174
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/input/touchscreen/ts_filter_median.c
@@ -0,0 +1,261 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008 Andy Green <andy@openmoko.com>
+ *
+ *
+ * Median averaging stuff.  We sort incoming raw samples into an array of
+ * MEDIAN_SIZE length, discarding the oldest sample each time once we are full.
+ * We then return the sum of the middle three samples for X and Y.  It means
+ * the final result must be divided by (3 * scaling factor) to correct for
+ * avoiding the repeated /3.
+ *
+ * This strongly rejects brief excursions away from a central point that is
+ * sticky in time compared to the excursion duration.
+ *
+ * Thanks to Dale Schumacher (who wrote some example code) and Carl-Daniel
+ * Halifinger who pointed out this would be a good method.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/touchscreen/ts_filter_median.h>
+
+struct ts_filter_median {
+	/* Private configuration. */
+	struct ts_filter_median_configuration *config;
+	/* Generic Filter API. */
+	struct ts_filter tsf;
+
+	/* Count raw samples we get. */
+	int samples_count;
+	/*
+	 * Remember the last coordinates we got in order to know if
+	 * we are moving slow or fast.
+	 */
+	int last_issued[MAX_TS_FILTER_COORDS];
+	/* How many samples in the sort buffer are valid. */
+	int valid;
+	/* Samples taken for median in sorted form. */
+	int *sort[MAX_TS_FILTER_COORDS];
+	/* Samples taken for median. */
+	int *fifo[MAX_TS_FILTER_COORDS];
+	/* Where we are in the fifo sample memory. */
+	int pos;
+	/* Do we have a sample to deliver? */
+	int ready;
+};
+
+#define ts_filter_to_filter_median(f) \
+	container_of(f, struct ts_filter_median, tsf)
+
+
+static void ts_filter_median_insert(int *p, int sample, int count)
+{
+	int n;
+
+	/* Search through what we got so far to find where to put sample. */
+	for (n = 0; n < count; n++)
+		if (sample < p[n]) {	/* We met somebody bigger than us? */
+			/* Starting from the end, push bigger guys down one. */
+			for (count--; count >= n; count--)
+				p[count + 1] = p[count];
+			p[n] = sample; /* Put us in place of first bigger. */
+			return;
+		}
+
+	p[count] = sample; /* Nobody was bigger than us, add us on the end. */
+}
+
+static void ts_filter_median_del(int *p, int value, int count)
+{
+	int index;
+
+	for (index = 0; index < count; index++)
+		if (p[index] == value) {
+			for (; index < count; index++)
+				p[index] = p[index + 1];
+			return;
+		}
+}
+
+
+static void ts_filter_median_clear(struct ts_filter *tsf)
+{
+	struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+
+	tsfm->pos = 0;
+	tsfm->valid = 0;
+	tsfm->ready = 0;
+	memset(&tsfm->last_issued[0], 1, tsf->count_coords * sizeof(int));
+}
+
+static struct ts_filter *ts_filter_median_create(
+	struct platform_device *pdev,
+	const struct ts_filter_configuration *conf,
+	int count_coords)
+{
+	int *p;
+	int n;
+	struct ts_filter_median *tsfm = kzalloc(sizeof(struct ts_filter_median),
+								    GFP_KERNEL);
+
+	if (!tsfm)
+		return NULL;
+
+	tsfm->config = container_of(conf,
+				    struct ts_filter_median_configuration,
+				    config);
+
+	tsfm->tsf.count_coords = count_coords;
+
+	tsfm->config->midpoint = (tsfm->config->extent >> 1) + 1;
+
+	p = kmalloc(2 * count_coords * sizeof(int) * (tsfm->config->extent + 1),
+		    GFP_KERNEL);
+	if (!p) {
+		kfree(tsfm);
+		return NULL;
+	}
+
+	for (n = 0; n < count_coords; n++) {
+		tsfm->sort[n] = p;
+		p += tsfm->config->extent + 1;
+		tsfm->fifo[n] = p;
+		p += tsfm->config->extent + 1;
+	}
+
+	ts_filter_median_clear(&tsfm->tsf);
+
+	dev_info(&pdev->dev,
+		 "Created Median filter len:%d coords:%d dec_threshold:%d\n",
+		 tsfm->config->extent, count_coords,
+		 tsfm->config->decimation_threshold);
+
+	return &tsfm->tsf;
+}
+
+static void ts_filter_median_destroy(struct ts_filter *tsf)
+{
+	struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+
+	kfree(tsfm->sort[0]); /* First guy has pointer from kmalloc. */
+	kfree(tsf);
+}
+
+static void ts_filter_median_scale(struct ts_filter *tsf, int *coords)
+{
+	int n;
+
+	for (n = 0; n < tsf->count_coords; n++)
+		coords[n] = (coords[n] + 2) / 3;
+}
+
+/*
+ * Give us the raw sample data coords, and if we return 1 then you can
+ * get a filtered coordinate from coords. If we return 0 you didn't
+ * fill all the filters with samples yet.
+ */
+
+static int ts_filter_median_process(struct ts_filter *tsf, int *coords)
+{
+	struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+	int n;
+	int movement = 1;
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		/* Grab copy in insertion order to remove when oldest. */
+		tsfm->fifo[n][tsfm->pos] = coords[n];
+		/* Insert these samples in sorted order in the median arrays. */
+		ts_filter_median_insert(tsfm->sort[n], coords[n], tsfm->valid);
+	}
+	/* Move us on in the fifo. */
+	if (++tsfm->pos == (tsfm->config->extent + 1))
+		tsfm->pos = 0;
+
+	/* Have we finished a median sampling? */
+	if (++tsfm->valid < tsfm->config->extent)
+		goto process_exit; /* No valid sample to use. */
+
+	BUG_ON(tsfm->valid != tsfm->config->extent);
+
+	tsfm->valid--;
+
+	/*
+	 * Sum the middle 3 in the median sorted arrays. We don't divide back
+	 * down which increases the sum resolution by a factor of 3 until the
+	 * scale API function is called.
+	 */
+	for (n = 0; n < tsf->count_coords; n++)
+		/* Perform the deletion of the oldest sample. */
+		ts_filter_median_del(tsfm->sort[n], tsfm->fifo[n][tsfm->pos],
+				     tsfm->valid);
+
+	tsfm->samples_count--;
+	if (tsfm->samples_count >= 0)
+		goto process_exit;
+
+	for (n = 0; n < tsf->count_coords; n++) {
+		/* Give the coordinate result from summing median 3. */
+		coords[n] = tsfm->sort[n][tsfm->config->midpoint - 1] +
+			    tsfm->sort[n][tsfm->config->midpoint] +
+			    tsfm->sort[n][tsfm->config->midpoint + 1];
+
+		movement += abs(tsfm->last_issued[n] - coords[n]);
+	}
+
+	if (movement > tsfm->config->decimation_threshold) /* Moving fast. */
+		tsfm->samples_count = tsfm->config->decimation_above;
+	else
+		tsfm->samples_count = tsfm->config->decimation_below;
+
+	memcpy(&tsfm->last_issued[0], coords, tsf->count_coords * sizeof(int));
+
+	tsfm->ready = 1;
+
+process_exit:
+	return 0;
+}
+
+static int ts_filter_median_haspoint(struct ts_filter *tsf)
+{
+	struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
+
+	return priv->ready;
+}
+
+static void ts_filter_median_getpoint(struct ts_filter *tsf, int *point)
+{
+	struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
+
+	BUG_ON(!priv->ready);
+
+	memcpy(point, &priv->last_issued[0], tsf->count_coords * sizeof(int));
+
+	priv->ready = 0;
+}
+
+const struct ts_filter_api ts_filter_median_api = {
+	.create =	ts_filter_median_create,
+	.destroy =	ts_filter_median_destroy,
+	.clear =	ts_filter_median_clear,
+	.process =	ts_filter_median_process,
+	.scale =	ts_filter_median_scale,
+	.haspoint =	ts_filter_median_haspoint,
+	.getpoint =	ts_filter_median_getpoint,
+};
+EXPORT_SYMBOL_GPL(ts_filter_median_api);
+