Add realtek target files

Signed-off-by: Roman Yeryomin <roman@advem.lv>

1 files changed, 165 insertions, 0 deletions

diff --git a/target/linux/realtek/files/include/net/rtl/rtl865x_outputQueue.h b/target/linux/realtek/files/include/net/rtl/rtl865x_outputQueue.h
new file mode 100644
index 000000000..ed70fc4a9
--- /dev/null
+++ b/target/linux/realtek/files/include/net/rtl/rtl865x_outputQueue.h
@@ -0,0 +1,165 @@
+#ifndef	RTL865X_OUTPUTQUEUE_H
+#define	RTL865X_OUTPUTQUEUE_H
+#include <linux/if.h>
+
+#if	!defined(CONFIG_RTL_LAYERED_ASIC_DRIVER)
+#define	RTL865XC_MNQUEUE_OUTPUTQUEUE		1
+#define	RTL865XC_QOS_OUTPUTQUEUE				1
+
+typedef struct rtl865xC_outputQueuePara_s {
+
+	uint32	ifg;							/* default: Bandwidth Control Include/exclude Preamble & IFG */
+	uint32	gap;							/* default: Per Queue Physical Length Gap = 20 */
+	uint32	drop;						/* default: Descriptor Run Out Threshold = 500 */
+
+	uint32	systemSBFCOFF;				/*System shared buffer flow control turn off threshold*/
+	uint32	systemSBFCON;				/*System shared buffer flow control turn on threshold*/
+
+	uint32	systemFCOFF;				/* system flow control turn off threshold */
+	uint32	systemFCON;					/* system flow control turn on threshold */
+
+	uint32	portFCOFF;					/* port base flow control turn off threshold */
+	uint32	portFCON;					/* port base flow control turn on threshold */	
+
+	uint32	queueDescFCOFF;				/* Queue-Descriptor=Based Flow Control turn off Threshold  */
+	uint32	queueDescFCON;				/* Queue-Descriptor=Based Flow Control turn on Threshold  */
+
+	uint32	queuePktFCOFF;				/* Queue-Packet=Based Flow Control turn off Threshold  */
+	uint32	queuePktFCON;				/* Queue-Packet=Based Flow Control turn on Threshold  */
+}	rtl865xC_outputQueuePara_t;
+#endif
+
+#define	MAX_QOS_RULE_NUM		10
+#define	MAX_MARK_NUM_PER_DEV	5	// Note: not include the default mark(0) and should be <= (hw queue number - 1(for default))
+#define	IPPROTO_ANY		256
+#define	IPPROTO_BOTH		257
+
+#define	QOS_DEF_QUEUE		0x4
+#define	QOS_VALID_MASK	0x2
+#define	QOS_TYPE_MASK		0x1
+#define	QOS_TYPE_STR		0x0	/*0x0|QOS_VALID_MASK*/
+#define	QOS_TYPE_WFQ		0x1	/*0x1|QOS_VALID_MASK*/
+
+#define	EGRESS_BANDWIDTH_GRANULARITY			0x10000	/* 	64*1024	 */
+#define	EGRESS_BANDWIDTH_GRANULARITY_BITMASK	0xffff
+#define	EGRESS_BANDWIDTH_GRANULARITY_BITLEN	16
+
+#define	INGRESS_BANDWIDTH_GRANULARITY_BITLEN	14
+
+#define	EGRESS_WFQ_MAX_RATIO			0x80
+
+#if 0
+#define QOS_DEBUGP		printk
+#else
+#define QOS_DEBUGP(format, args...)
+#endif
+
+#if 0
+#define QOS_RULE_DEBUGP		printk
+#else
+#define QOS_RULE_DEBUGP(format, args...)
+#endif
+
+/* priority decision array index */
+enum PriDecIdx
+{
+	PORT_BASE	= 0,
+	D1P_BASE, 
+	DSCP_BASE, 
+	ACL_BASE, 
+	NAT_BASE,
+	PRI_TYPE_NUM,
+};
+
+typedef	unsigned int	bwu;
+
+typedef struct {
+	/*	classify	*/
+	unsigned int protocol;
+	ipaddr_t	local_ip_start;
+	ipaddr_t 	local_ip_end;
+	ipaddr_t 	remote_ip_start;
+	ipaddr_t 	remote_ip_end;
+	unsigned short lo_port_start;
+	unsigned short lo_port_end;
+	unsigned short re_port_start;
+	unsigned short re_port_end;
+
+	/*	tc	*/
+	uint32		mark;
+	unsigned char	prio;
+	unsigned char	rate;
+} rtl865x_qos_entry_t, *rtl865x_qos_entry_p;
+
+typedef struct {
+	uint8		dscpRemark;
+	uint8		vlanPriRemark;
+	uint16		flags;
+
+	char			ifname[IFNAMSIZ];
+	uint32		queueId;			/*	identify outputQueue	*/
+	uint32		handle;
+
+	bwu			ceil;
+	bwu			burst;
+	bwu			bandwidth;		/* average bandwidth, unit kbps	*/
+} rtl865x_qos_t, *rtl865x_qos_p;
+
+typedef	rtl865x_qos_entry_t		QOS_T;
+typedef	rtl865x_qos_entry_p		QOS_Tp;
+
+typedef struct _rtl865x_qos_rule_t{
+	char			inIfname[IFNAMSIZ];
+	char			outIfname[IFNAMSIZ];
+	rtl865x_AclRule_t *rule;
+	uint32			mark;
+	uint32			handle;
+	struct _rtl865x_qos_rule_t	*next;
+} rtl865x_qos_rule_t, *rtl865x_qos_rule_p;
+
+typedef struct {
+	uint32		mark;		/*	mark==0 means entry not used	*/
+	uint32		priority;
+} rtl_qos_mark_info_t, *rtl_qos_mark_info_p;
+
+int32 rtl865x_qosSetBandwidth(uint8 *netIfName, uint32 bps);
+int32 rtl865x_qosFlushBandwidth(uint8 *netIfName);
+int32 rtl865x_qosGetPriorityByHandle(uint8 *priority, uint32 handle);
+int32 rtl865x_qosProcessQueue(uint8 *netIfName, rtl865x_qos_t *qosInfo);
+int32 rtl865x_setRule2HandleMapping(uint32 ifIdx, uint32 idx, uint32 handle);
+int32 rtl865x_qosAddMarkRule(rtl865x_qos_rule_t *rule);
+int32 rtl865x_qosFlushMarkRule(void);
+int32 rtl865x_qosCheckNaptPriority(rtl865x_AclRule_t *qosRule);
+int32 rtl865x_closeQos(uint8 *netIfName);
+int32 rtl865x_registerQosCompFunc(int8 (*p_cmpFunc)(rtl865x_qos_t	*entry1, rtl865x_qos_t	*entry2));	
+int __init rtl865x_initOutputQueue(uint8 **netIfName);
+void __exit rtl865x_exitOutputQueue(void);
+int32 rtl865x_qosArrangeRuleByNetif(void);
+#if defined(CONFIG_RTL_PROC_DEBUG)
+int32 rtl865x_show_allQosAcl(void);
+#endif
+extern int32 rtl865x_qosArrangeRuleByNetif(void);
+int32 rtl_qosGetPriorityByMark(uint8 *netIfName, int32 mark);
+
+int32 rtl_qosGetPriorityByVid(int32 vid, int32 mark);
+int32 rtl_qosSetPriorityByMark(uint8 *netIfName, int32 mark, int32 handler, int32 enable);
+
+extern u8 netIfNameArray[NETIF_NUMBER][IFNAMSIZ];
+extern rtl865x_qos_rule_t		*rtl865x_qosRuleHead;
+
+#if defined(CONFIG_RTK_QOS_FOR_CABLE_MODEM)
+void rtl_initQosForCableModem(void);
+#endif
+
+#if defined (CONFIG_RTL_HW_QOS_SUPPORT) && defined(CONFIG_RTL_QOS_PATCH)
+#define	DEF_QUEUE_NUM					1
+#define	MAX_QOS_PATCH_QUEUE_NUM	2
+void rtl865x_reinitOutputQueuePatchForQoS(uint32 qosEnabled);
+#endif
+
+#if defined (CONFIG_RTL_HW_QOS_SUPPORT) 	// sync from voip customer for multiple ppp
+int32 rtl865x_qosFlushMarkRuleByDev(uint8 *netIfName);
+int32 rtl865x_qosRearrangeRule(void);
+#endif
+
+#endif