Move to rsdk 3.2.4. Compiles cleanly.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

1 files changed, 449 insertions, 0 deletions

diff --git a/target/linux/realtek/files/arch/rlx/bsp_rtl8196e/bspchip.h b/target/linux/realtek/files/arch/rlx/bsp_rtl8196e/bspchip.h
new file mode 100644
index 000000000..1bddb2a7d
--- /dev/null
+++ b/target/linux/realtek/files/arch/rlx/bsp_rtl8196e/bspchip.h
@@ -0,0 +1,449 @@
+/*
+ * Copyright 2006, Realtek Semiconductor Corp.
+ *
+ * rtl8198/bsp/bspchip.h:
+ *   RTL8198 chip-level header file
+ *
+ * Jwsyu (jwsyu@realtek.com)
+ *  Nov. 27, 2009
+ * Tony Wu (tonywu@realtek.com.tw)
+ * Nov. 07, 2006
+ */
+
+#ifndef _BSPCHIP_H_
+#define _BSPCHIP_H_
+
+#include <linux/autoconf.h>
+
+/*
+ * Register access macro
+ */
+#define REG32(reg)	(*(volatile unsigned int   *)((unsigned int)reg))
+#define REG16(reg)	(*(volatile unsigned short *)((unsigned int)reg))
+#define REG08(reg)	(*(volatile unsigned char  *)((unsigned int)reg))
+#define REG8(reg)   (*(volatile unsigned char  *)((unsigned int)reg))
+
+#define WRITE_MEM32(addr, val)   (*(volatile unsigned int *)   (addr)) = (val)
+#define READ_MEM32(addr)         (*(volatile unsigned int *)   (addr))
+#define WRITE_MEM16(addr, val)   (*(volatile unsigned short *) (addr)) = (val)
+#define READ_MEM16(addr)         (*(volatile unsigned short *) (addr))
+#define WRITE_MEM8(addr, val)    (*(volatile unsigned char *)  (addr)) = (val)
+#define READ_MEM8(addr)          (*(volatile unsigned char *)  (addr))
+
+#define PADDR(addr)  ((addr) & 0x1FFFFFFF)
+
+/*
+ * IRQ Controller
+ */
+#define BSP_IRQ_CPU_BASE   0
+#define BSP_IRQ_CPU_NUM    8
+
+#define BSP_IRQ_LOPI_BASE   (BSP_IRQ_CPU_BASE + BSP_IRQ_CPU_NUM)
+#define BSP_IRQ_LOPI_NUM   8
+
+#define BSP_IRQ_ICTL_BASE  (BSP_IRQ_LOPI_BASE + BSP_IRQ_LOPI_NUM)
+#define BSP_IRQ_ICTL_NUM   32
+
+/*
+ *  ====================================
+ *  Platform Configurable Common Options
+ *  ====================================
+ */
+
+#define PROM_DEBUG      0
+
+#ifdef CONFIG_FPGA_PLATFORM
+//#define BSP_SYS_CLK_RATE	  	(33860000)      //33.86MHz
+#define BSP_SYS_CLK_RATE	  	(27000000)      //27MHz
+#else
+#define BSP_SYS_CLK_RATE	  	(200000000)     //HS1 clock : 200 MHz
+#endif
+
+#define BSP_BAUDRATE        38400  /* ex. 19200 or 38400 or 57600 or 115200 */ 
+                               /* For Early Debug */
+
+/*
+ *   RTL8196b Interrupt Scheme (Subject to change)
+ *
+ *   Source     EXT_INT  CPU INT    LOPI    IRQ      
+ *   --------   -------  -------  -------  ------   
+ *   PCIB0TO    0           2        -      16+0     
+ *   PCIB1TO    1           2        -      16+1     
+ *   LBCTMOm0   2           2        -      16+2     
+ *   LBCTMOm1   3           2        -      16+3     
+ *   LBCTMOs    4           2        -      16+4     
+ *   TIMER0     8           -        5       8+5
+ *   TIMER1     9           2        -      16+9     
+ *   USB        10          -        1       8+1
+ *   UART0      12          2        -      16+12
+ *   UART1      13          2        -      16+13    
+ *   VoIP       14          2        -      16+14    
+ *   SWCORE     15          -        4       8+4        
+ *   GPIO_ABCD  16          2        -      16+16    
+ *   GPIO_EFGH  17          2        -      16+17    
+ *   NFBI       18          -        6       8+6
+ *   PCM        19          -        7      8+7    
+ *   CRYPTO     20          2        -      16+20
+ *   PCIE0      21          -        2       8+2
+ *   PCIE1      22          -        3       8+3
+ *   I2S	26	    -	     0	     8+6
+ */                               
+/*                        
+ * IRQ Mapping
+ */
+#define BSP_ICTL_IRQ            (BSP_IRQ_CPU_BASE + 2) //for irq cascade
+
+#define BSP_PCIB0TMO_IRQ        (BSP_IRQ_ICTL_BASE + 0)
+#define BSP_PCIB1TMO_IRQ        (BSP_IRQ_ICTL_BASE + 1)
+#define BSP_LBCTMOm0_IRQ        (BSP_IRQ_ICTL_BASE + 2)
+#define BSP_LBCTMOm1_IRQ        (BSP_IRQ_ICTL_BASE + 3)
+#define BSP_LBCTMOs_IRQ         (BSP_IRQ_ICTL_BASE + 4)
+#define BSP_TC0_IRQ             (13)	/* BSP_IRQ_LOPI_BASE + 5	*/
+#define BSP_TC1_IRQ             (BSP_IRQ_ICTL_BASE + 9)
+#define BSP_USB_IRQ             (10)	/* BSP_IRQ_LOPI_BASE + 2	*/
+#define BSP_OTG_IRQ             (15)  //(BSP_IRQ_LOPI_BASE + 7)   //wei add ,bit 15=8+7
+//#define BSP_UART0_IRQ           (BSP_IRQ_ICTL_BASE + 0)
+#define BSP_UART0_IRQ           (8)	/* BSP_IRQ_LOPI_BASE + 0	*/
+#define BSP_UART1_IRQ           (BSP_IRQ_ICTL_BASE + 13)
+#define BSP_SWCORE_IRQ          (12)	/* BSP_IRQ_LOPI_BASE + 4	*/
+#define BSP_GPIO_ABCD_IRQ       (BSP_IRQ_ICTL_BASE + 16)
+#define BSP_GPIO_EFGH_IRQ       (BSP_IRQ_ICTL_BASE + 17)
+#define BSP_NFBI_IRQ            (15)	/* BSP_IRQ_LOPI_BASE + 7	*/
+#define BSP_PCM_IRQ             (9)	/* BSP_IRQ_LOPI_BASE + 1	*/
+#define BSP_CRYPTO_IRQ          (BSP_IRQ_ICTL_BASE + 20)
+#define BSP_GDMA_IRQ            (BSP_IRQ_ICTL_BASE + 23)
+#define BSP_PCIE_IRQ            (11)	/* BSP_IRQ_LOPI_BASE + 3	*/
+#define BSP_PCIE2_IRQ           (14)	/* BSP_IRQ_LOPI_BASE + 6	*/
+//#define BSP_I2S_IRQ             (BSP_IRQ_LOPI_BASE + 0)
+//#define BSP_I2S_IRQ             (BSP_IRQ_ICTL_BASE + 12)
+
+/*
+ * Interrupt Routing Selection
+ */
+#define BSP_IRQ_CASCADE     2
+#define BSP_PTM_RS          BSP_IRQ_CASCADE
+#define BSP_LBCTMOs2_RS     BSP_IRQ_CASCADE
+#define BSP_LBCTMOs1_RS     BSP_IRQ_CASCADE
+#define BSP_PKT_RS          BSP_IRQ_CASCADE
+#define BSP_SPI_RS          BSP_IRQ_CASCADE
+#define BSP_NIC100_RS       BSP_IRQ_CASCADE
+#define BSP_SAR_RS          BSP_IRQ_CASCADE
+#define BSP_DMT_RS          BSP_IRQ_CASCADE
+#define BSP_PCIE_RS         BSP_PCIE_IRQ
+#define BSP_PCIE2_RS        BSP_PCIE2_IRQ
+#define BSP_GDMA_RS         BSP_IRQ_CASCADE
+#define BSP_SECURITY_RS     BSP_IRQ_CASCADE
+#define BSP_PCM_RS          BSP_PCM_IRQ
+#define BSP_NFBI_RS         BSP_NFBI_IRQ
+#define BSP_GPIO_EFGH_RS    BSP_IRQ_CASCADE
+#define BSP_GPIO_ABCD_RS    BSP_IRQ_CASCADE
+#define BSP_SW_RS           BSP_SWCORE_IRQ
+//#define BSP_UART0_RS      BSP_UART0_IRQ
+#define BSP_UART0_RS        BSP_IRQ_CASCADE
+#define BSP_UART1_RS        BSP_IRQ_CASCADE
+#define BSP_USB_D_RS        BSP_IRQ_CASCADE
+#define BSP_USB_H_RS        BSP_USB_IRQ
+#define BSP_OTG_RS          BSP_OTG_IRQ   //wei add
+#define BSP_TC0_RS          BSP_TC0_IRQ
+#define BSP_TC1_RS          BSP_IRQ_CASCADE
+#define BSP_LBCTMOm2_RS     BSP_IRQ_CASCADE
+#define BSP_LBCTMOm1_RS     BSP_IRQ_CASCADE
+#define BSP_SPEED_RS        BSP_IRQ_CASCADE
+#define BSP_LBCTMOs0_RS     BSP_IRQ_CASCADE
+#define BSP_LBCTMOm0_RS     BSP_IRQ_CASCADE
+#define BSP_OCPTMO_RS       BSP_IRQ_CASCADE
+#define BSP_PCIB0TO_RS      BSP_IRQ_CASCADE
+#define BSP_NONE            BSP_IRQ_CASCADE
+#define BSP_PCIB0TMO_RS     BSP_IRQ_CASCADE
+#define BSP_PCIB1TMO_RS     BSP_IRQ_CASCADE
+#define BSP_LBCTMOs_RS      BSP_IRQ_CASCADE
+#define BSP_CRYPTO_RS       BSP_IRQ_CASCADE
+//#define BSP_I2S_RS          BSP_I2S_IRQ
+//#define BSP_I2S_RS          BSP_IRQ_CASCADE
+
+#define BSP_DIVISOR         1000
+
+#if BSP_DIVISOR > (1 << 16)
+#error "Exceed the Maximum Value of DivFactor"
+#endif
+
+/*
+ *  ==========================
+ *  Platform Register Settings
+ *  ==========================
+ */
+
+/*
+ * CPU
+ */
+#define BSP_IMEM_BASE       0x00C00000
+#define BSP_IMEM_TOP        0x00C03FFF
+
+#define BSP_DMEM_BASE       0x00C04000
+#define BSP_DMEM_TOP        0x00C05FFF
+
+/*
+ * Memory Controller
+ */
+#define BSP_MC_MCR          0xB8001000
+   #define BSP_MC_MCR_VAL      0x92A28000
+
+#define BSP_MC_MTCR0        0xB8001004
+   #define BSP_MC_MTCR0_VAL    0x12120000
+
+#define BSP_MC_MTCR1        0xB8001008
+   #define BSP_MC_MTCR1_VAL    0x00000FEB
+
+#define BSP_MC_PFCR         0xB8001010
+   #define BSP_MC_PFCR_VAL     0x00000101
+
+
+#define BSP_MC_BASE         0xB8001000
+#define BSP_NCR             (BSP_MC_BASE + 0x100)
+#define BSP_NSR             (BSP_MC_BASE + 0x104)
+#define BSP_NCAR            (BSP_MC_BASE + 0x108)
+#define BSP_NADDR           (BSP_MC_BASE + 0x10C)
+#define BSP_NDR             (BSP_MC_BASE + 0x110)
+
+#define BSP_SFCR            (BSP_MC_BASE + 0x200)
+#define BSP_SFDR            (BSP_MC_BASE + 0x204)
+
+/*
+ * UART
+ */
+#define BSP_UART0_BASE      0xB8002000
+#define BSP_UART0_MAP_BASE  0x18002000
+#define BSP_UART0_RBR       (BSP_UART0_BASE + 0x000)
+#define BSP_UART0_THR       (BSP_UART0_BASE + 0x000)
+#define BSP_UART0_DLL       (BSP_UART0_BASE + 0x000)
+#define BSP_UART0_IER       (BSP_UART0_BASE + 0x004)
+#define BSP_UART0_DLM       (BSP_UART0_BASE + 0x004)
+#define BSP_UART0_IIR       (BSP_UART0_BASE + 0x008)
+#define BSP_UART0_FCR       (BSP_UART0_BASE + 0x008)
+#define BSP_UART0_LCR       (BSP_UART0_BASE + 0x00C)
+#define BSP_UART0_MCR       (BSP_UART0_BASE + 0x010)
+#define BSP_UART0_LSR       (BSP_UART0_BASE + 0x014)
+
+#define BSP_UART1_BASE      0xB8002100
+#define BSP_UART1_MAP_BASE  0x18002100
+#define BSP_UART1_RBR       (BSP_UART1_BASE + 0x000)
+#define BSP_UART1_THR       (BSP_UART1_BASE + 0x000)
+#define BSP_UART1_DLL       (BSP_UART1_BASE + 0x000)
+#define BSP_UART1_IER       (BSP_UART1_BASE + 0x004)
+#define BSP_UART1_DLM       (BSP_UART1_BASE + 0x004)
+#define BSP_UART1_IIR       (BSP_UART1_BASE + 0x008)
+#define BSP_UART1_FCR       (BSP_UART1_BASE + 0x008)
+   #define BSP_FCR_EN          0x01
+   #define BSP_FCR_RXRST       0x02
+   #define     BSP_RXRST             0x02
+   #define BSP_FCR_TXRST       0x04
+   #define     BSP_TXRST             0x04
+   #define BSP_FCR_DMA         0x08
+   #define BSP_FCR_RTRG        0xC0
+   #define     BSP_CHAR_TRIGGER_01   0x00
+   #define     BSP_CHAR_TRIGGER_04   0x40
+   #define     BSP_CHAR_TRIGGER_08   0x80
+   #define     BSP_CHAR_TRIGGER_14   0xC0
+#define BSP_UART1_LCR       (BSP_UART1_BASE + 0x00C)
+   #define BSP_LCR_WLN         0x03
+   #define     BSP_CHAR_LEN_5        0x00
+   #define     BSP_CHAR_LEN_6        0x01
+   #define     BSP_CHAR_LEN_7        0x02
+   #define     BSP_CHAR_LEN_8        0x03
+   #define BSP_LCR_STB         0x04
+   #define     BSP_ONE_STOP          0x00
+   #define     BSP_TWO_STOP          0x04
+   #define BSP_LCR_PEN         0x08
+   #define     BSP_PARITY_ENABLE     0x01
+   #define     BSP_PARITY_DISABLE    0x00
+   #define BSP_LCR_EPS         0x30
+   #define     BSP_PARITY_ODD        0x00
+   #define     BSP_PARITY_EVEN       0x10
+   #define     BSP_PARITY_MARK       0x20
+   #define     BSP_PARITY_SPACE      0x30
+   #define BSP_LCR_BRK         0x40
+   #define BSP_LCR_DLAB        0x80
+   #define     BSP_DLAB              0x80
+#define BSP_UART1_MCR       (BSP_UART1_BASE + 0x010)
+#define BSP_UART1_LSR       (BSP_UART1_BASE + 0x014)
+   #define BSP_LSR_DR          0x01
+   #define     BSP_RxCHAR_AVAIL      0x01
+   #define BSP_LSR_OE          0x02
+   #define BSP_LSR_PE          0x04
+   #define BSP_LSR_FE          0x08
+   #define BSP_LSR_BI          0x10
+   #define BSP_LSR_THRE        0x20
+   #define     BSP_TxCHAR_AVAIL      0x00
+   #define     BSP_TxCHAR_EMPTY      0x20
+   #define BSP_LSR_TEMT        0x40
+   #define BSP_LSR_RFE         0x80
+
+
+/*
+ * Interrupt Controller
+ */
+#define BSP_GIMR            0xB8003000
+   #define BSP_I2S_IE          (1 << 26)
+   #define BSP_GDMA_IE         (1 << 23)
+   #define BSP_PCIE2_IE        (1 << 22)
+   #define BSP_PCIE_IE         (1 << 21)  // shall be 22
+   #define BSP_CRYPTO_IE       (1 << 20)
+   #define BSP_PCM_IE          (1 << 19)
+   #define BSP_NFBI_IE         (1 << 18)
+   #define BSP_GPIO_EFGH_IE    (1 << 17)
+   #define BSP_GPIO_ABCD_IE    (1 << 16)
+   #define BSP_SW_IE           (1 << 15)
+   #define BSP_PCI_IE          (1 << 14)
+   #define BSP_UART1_IE        (1 << 13)
+   #define BSP_UART0_IE        (1 << 12)
+   #define BSP_OTG_IE          (1 << 11)  //wei add
+   #define BSP_USB_H_IE        (1 << 10)
+   #define BSP_TC1_IE          (1 << 9)
+   #define BSP_TC0_IE          (1 << 8)
+   #define BSP_LBCTMOs_IE      (1 << 4)
+   #define BSP_LBCTMOm1_IE     (1 << 3)
+   #define BSP_LBCTMOm0_IE     (1 << 2)
+   #define BSP_PCIB1TO_IE      (1 << 1)
+   #define BSP_PCIB0TO_IE      (1 << 0)
+
+#define BSP_GISR            0xB8003004
+   #define BSP_I2S_IP          (1 << 26)
+   #define BSP_GDMA_IP         (1 << 23)
+   #define BSP_PCIE2_IP        (1 << 22)
+   #define BSP_PCIE_IP         (1 << 21) // shall be 22
+   #define BSP_CRYPTO_IP       (1 << 20)
+   #define BSP_PCM_IP          (1 << 19)
+   #define BSP_NFBI_IP         (1 << 18)
+   #define BSP_GPIO_EFGH_IP    (1 << 17)
+   #define BSP_GPIO_ABCD_IP    (1 << 16)
+   #define BSP_SW_IP           (1 << 15)
+   #define BSP_PCI_IP          (1 << 14)
+   #define BSP_UART1_IP        (1 << 13)
+   #define BSP_UART0_IP        (1 << 12)
+   #define BSP_OTG_IP          (1 << 11)  //wei add
+   #define BSP_USB_H_IP        (1 << 10)
+   #define BSP_TC1_IP          (1 << 9)
+   #define BSP_TC0_IP          (1 << 8)
+   #define BSP_LBCTMOs_IP      (1 << 4)
+   #define BSP_LBCTMOm1_IP     (1 << 3)
+   #define BSP_LBCTMOm0_IP     (1 << 2)
+   #define BSP_PCIB1TO_IP      (1 << 1)
+   #define BSP_PCIB0TO_IP      (1 << 0)
+   
+#define BSP_IRR0            0xB8003008
+#define BSP_IRR0_SETTING    ((BSP_LBCTMOm2_RS << 28) | \
+                         (BSP_LBCTMOm1_RS << 24) | \
+                         (BSP_SPEED_RS    << 20) | \
+                         (BSP_LBCTMOs0_RS << 16) | \
+                         (BSP_LBCTMOm0_RS << 12) | \
+                         (BSP_OCPTMO_RS   << 8)  | \
+                         (BSP_NONE        << 4)  | \
+                         (BSP_PCIB0TO_RS  << 0)    \
+                        )
+
+#define BSP_IRR1            0xB800300C
+#define BSP_IRR1_SETTING    ((BSP_SW_RS    << 28) | \
+                         (BSP_NONE  << 24) | \
+                         (BSP_UART1_RS << 20) | \
+                         (BSP_UART0_RS << 16) | \
+                         (BSP_OTG_RS << 12) | \
+                         (BSP_USB_H_RS << 8)  | \
+                         (BSP_TC1_RS   << 4)  | \
+                         (BSP_TC0_RS   << 0)    \
+                        )
+
+#define BSP_IRR2            0xB8003010
+#define BSP_IRR2_SETTING    ((BSP_GDMA_RS      << 28) | \
+                         (BSP_PCIE2_RS     << 24) | \
+                         (BSP_PCIE_RS      << 20) | \
+                         (BSP_SECURITY_RS  << 16) | \
+                         (BSP_PCM_RS       << 12) | \
+                         (BSP_NFBI_RS      << 8)  | \
+                         (BSP_GPIO_EFGH_RS << 4)  | \
+                         (BSP_GPIO_ABCD_RS << 0)    \
+                        )
+
+#define BSP_IRR3            0xB8003014
+#define BSP_IRR3_SETTING    ((BSP_PTM_RS      << 28) | \
+                         (BSP_LBCTMOs2_RS << 24) | \
+                         (BSP_LBCTMOs1_RS << 20) | \
+                         (BSP_PKT_RS      << 16) | \
+                         (BSP_SPI_RS      << 12) | \
+                         (BSP_SAR_RS      << 4)  | \
+                         (BSP_DMT_RS      << 0)    \
+                        )
+/*
+ * Timer/Counter
+ */
+#define BSP_TC_BASE         0xB8003100
+#define BSP_TC0DATA         (BSP_TC_BASE + 0x00)
+#define BSP_TC1DATA         (BSP_TC_BASE + 0x04)
+   #define BSP_TCD_OFFSET      8
+#define BSP_TC0CNT          (BSP_TC_BASE + 0x08)
+#define BSP_TC1CNT          (BSP_TC_BASE + 0x0C)
+#define BSP_TCCNR           (BSP_TC_BASE + 0x10)
+   #define BSP_TC0EN           (1 << 31)
+   #define BSP_TC0MODE_TIMER   (1 << 30)
+   #define BSP_TC1EN           (1 << 29)
+   #define BSP_TC1MODE_TIMER   (1 << 28)
+#define BSP_TCIR            (BSP_TC_BASE + 0x14)
+   #define BSP_TC0IE           (1 << 31)
+   #define BSP_TC1IE           (1 << 30)
+   #define BSP_TC0IP           (1 << 29)
+   #define BSP_TC1IP           (1 << 28)
+#define BSP_CDBR            (BSP_TC_BASE + 0x18)
+   #define BSP_DIVF_OFFSET     16
+#define BSP_WDTCNR          (BSP_TC_BASE + 0x1C)
+
+/*
+ * PCIE Host Controller
+ */
+#define BSP_PCIE0_H_CFG     0xB8B00000
+#define BSP_PCIE0_H_EXT     0xB8B01000
+#define BSP_PCIE0_H_MDIO    (BSP_PCIE0_H_EXT + 0x00)
+#define BSP_PCIE0_H_INTSTR  (BSP_PCIE0_H_EXT + 0x04)
+#define BSP_PCIE0_H_PWRCR   (BSP_PCIE0_H_EXT + 0x08)
+#define BSP_PCIE0_H_IPCFG   (BSP_PCIE0_H_EXT + 0x0C)
+#define BSP_PCIE0_H_MISC    (BSP_PCIE0_H_EXT + 0x10)
+#define BSP_PCIE0_D_CFG0    0xB8B10000
+#define BSP_PCIE0_D_CFG1    0xB8B11000
+#define BSP_PCIE0_D_MSG     0xB8B12000
+
+#define BSP_PCIE1_H_CFG     0xB8B20000
+#define BSP_PCIE1_H_EXT     0xB8B21000
+#define BSP_PCIE1_H_MDIO    (BSP_PCIE1_H_EXT + 0x00)
+#define BSP_PCIE1_H_INTSTR  (BSP_PCIE1_H_EXT + 0x04)
+#define BSP_PCIE1_H_PWRCR   (BSP_PCIE1_H_EXT + 0x08)
+#define BSP_PCIE1_H_IPCFG   (BSP_PCIE1_H_EXT + 0x0C)
+#define BSP_PCIE1_H_MISC    (BSP_PCIE1_H_EXT + 0x10)
+#define BSP_PCIE1_D_CFG0    0xB8B30000
+#define BSP_PCIE1_D_CFG1    0xB8B31000
+#define BSP_PCIE1_D_MSG     0xB8B32000
+
+#define BSP_PCIE0_D_IO      0xB8C00000
+#define BSP_PCIE1_D_IO      0xB8E00000
+#define BSP_PCIE_FUN_OFS      0xC00000 
+#define BSP_PCIE0_D_MEM     0xB9000000
+#define BSP_PCIE0_F1_D_MEM  (BSP_PCIE0_D_MEM + BSP_PCIE_FUN_OFS)
+#define BSP_PCIE1_D_MEM     0xBA000000
+#define BSP_PCIE1_F1_D_MEM  (BSP_PCIE1_D_MEM + BSP_PCIE_FUN_OFS)
+
+#if defined(CONFIG_RTL_92D_SUPPORT)
+#define BSP_CLK_MANAGE 	0xb8000010
+#endif
+
+/*
+ * Revision
+ */
+#define BSP_REVR		0xB8000000
+#define BSP_RTL8198_REVISION_A	0xC0000000
+#define BSP_RTL8198_REVISION_B	0xC0000001
+#define BSP_RTL8197D		0x8197C000
+#define BSP_RTL8196E		0x8196E000
+
+#ifdef CONFIG_RTL_USB_IP_HOST_SPEEDUP
+#define __IRAM_USB //__attribute__ ((section(".iram-rtkusb")))
+#else
+#define __IRAM_USB
+#endif
+#endif   /* _BSPCHIP_H */