strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

27 files changed, 3798 insertions, 0 deletions

diff --git a/target/linux/rdc/Makefile b/target/linux/rdc/Makefile
new file mode 100644
index 000000000..5af5e85c6
--- /dev/null
+++ b/target/linux/rdc/Makefile
@@ -0,0 +1,38 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=i386
+BOARD:=rdc
+BOARDNAME:=RDC321x x86
+FEATURES:=squashfs jffs2 broken
+
+LINUX_VERSION:=2.6.22.4
+
+define Target/Description
+        Build firmware images for RDC321x based routers
+        (e.g. Airlink101 AR525W, Linksys WRT54R, Sitecom WL-153)
+endef
+
+include $(INCLUDE_DIR)/kernel-build.mk
+
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+    define Kernel/SetInitramfs
+	echo "r6040 parent=wlan0" > $(TARGET_DIR)/etc/modules.d/99-r6040
+	$(RM) $(TARGET_DIR)/sbin/init
+	ln -s /etc/preinit $(TARGET_DIR)/sbin/init
+	sed -i 's,exec /sbin/init,exec /bin/busybox init,g' $(TARGET_DIR)/etc/preinit
+	sed -i 's,/sbin/init,/bin/busybox init,g' $(TARGET_DIR)/init
+	mv $(TARGET_DIR)/init $(TARGET_DIR)/linuxrc
+	sed -i 's,eth0,eth1,g' $(TARGET_DIR)/etc/config/network
+    endef
+endif
+
+# include the profiles
+-include profiles/*.mk
+
+$(eval $(call BuildKernel))
diff --git a/target/linux/rdc/base-files/default/etc/diag.sh b/target/linux/rdc/base-files/default/etc/diag.sh
new file mode 100644
index 000000000..8d5c38262
--- /dev/null
+++ b/target/linux/rdc/base-files/default/etc/diag.sh
@@ -0,0 +1,19 @@
+#!/bin/sh
+# Copyright (C) 2007 OpenWrt.org
+
+set_led() {
+	local led="$1"
+	local state="$2"
+	[ -d "/sys/class/leds/rdc321x:$led" ] && echo "$state" > "/sys/class/leds/rdc321x:$led/brightness"
+}
+
+set_state() {
+	case "$1" in
+		preinit)
+			set_led dmz 1
+		;;
+		done)
+			set_led dmz 0
+		;;
+	esac
+}
diff --git a/target/linux/rdc/config/default b/target/linux/rdc/config/default
new file mode 100644
index 000000000..381a961e9
--- /dev/null
+++ b/target/linux/rdc/config/default
@@ -0,0 +1,313 @@
+# CONFIG_60XX_WDT is not set
+# CONFIG_8139TOO is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_AGP is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_PIIX=m
+# CONFIG_ATM_DRIVERS is not set
+CONFIG_BASE_SMALL=0
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_BITREVERSE=y
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDE=m
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+# CONFIG_COMPAT_VDSO is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_CRYPTO_AES_586=m
+CONFIG_CRYPTO_DEV_GEODE=m
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
+CONFIG_CRYPTO_TWOFISH_586=m
+# CONFIG_CS5535_GPIO is not set
+# CONFIG_DCDBAS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_DELL_RBU is not set
+CONFIG_DEVPORT=y
+CONFIG_DMI=y
+CONFIG_DOUBLEFAULT=y
+# CONFIG_E100 is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EDAC is not set
+# CONFIG_EDD is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HID=m
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_HPET_TIMER is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_VIA is not set
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_I2C=m
+# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_I8K is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_IBM_ASM is not set
+CONFIG_ICPLUS_PHY=y
+CONFIG_IDE=m
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDE_PROC_FS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_YEALINK=m
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_ISA is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ITCO_WDT is not set
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_RUBIN=y
+CONFIG_JFS_FS=m
+CONFIG_KEXEC=y
+CONFIG_KTIME_SCALAR=y
+# CONFIG_KVM is not set
+CONFIG_LBD=y
+CONFIG_LEDS_RDC3211=y
+CONFIG_LSF=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M686 is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_MCA is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_CONCAT=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_NETSC520 is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_PNC2000 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_RDC3210=y
+CONFIG_MTD_RDC3210_ALLOW_JFFS2=y
+CONFIG_MTD_RDC3210_BUSWIDTH=2
+# CONFIG_MTD_RDC3210_FACTORY_PRESENT is not set
+CONFIG_MTD_RDC3210_SIZE=0x400000
+# CONFIG_MTD_RDC3210_STATIC_MAP is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SC520CDP is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_TS5500 is not set
+# CONFIG_MTRR is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NETDEV_1000 is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NOHIGHMEM=y
+# CONFIG_NO_HZ is not set
+CONFIG_NR_QUICK=1
+# CONFIG_NSC_GPIO is not set
+CONFIG_NVRAM=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PARAVIRT is not set
+CONFIG_PATA_ARTOP=m
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_PC87413_WDT is not set
+CONFIG_PCCARD=m
+CONFIG_PCCARD_NONSTATIC=m
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_GOANY=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+CONFIG_PCMCIA=m
+CONFIG_PHYLIB=y
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_PNPACPI is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_QUICKLIST=y
+CONFIG_R6040=m
+# CONFIG_R6040_NAPI is not set
+# CONFIG_RELOCATABLE is not set
+# CONFIG_RTC is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_SECCOMP is not set
+CONFIG_SEMAPHORE_SLEEPERS=y
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_SONYPI is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_TELCLOCK is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_TOSHIBA is not set
+CONFIG_UID16=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_V4L1=y
+# CONFIG_VM86 is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAFER_WDT is not set
+CONFIG_X86=y
+CONFIG_X86_32=y
+CONFIG_X86_ALIGNMENT_16=y
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_CPUID=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_ES7000 is not set
+CONFIG_X86_F00F_BUG=y
+# CONFIG_X86_GENERIC is not set
+# CONFIG_X86_GENERICARCH is not set
+CONFIG_X86_INVLPG=y
+CONFIG_X86_L1_CACHE_SHIFT=4
+# CONFIG_X86_MCE is not set
+CONFIG_X86_MINIMUM_CPU_MODEL=4
+CONFIG_X86_MSR=y
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_PC is not set
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_PPRO_FENCE=y
+CONFIG_X86_RDC=y
+CONFIG_X86_REBOOTFIXUPS=y
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_UP_APIC is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_VOYAGER is not set
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_XADD=y
diff --git a/target/linux/rdc/config/profile-wl153 b/target/linux/rdc/config/profile-wl153
new file mode 100644
index 000000000..3ab59a881
--- /dev/null
+++ b/target/linux/rdc/config/profile-wl153
@@ -0,0 +1,2 @@
+# CONFIG_MTD_RDC3210_ALLOW_JFFS2 is not set
+CONFIG_MTD_RDC3210_SIZE=0x200000
diff --git a/target/linux/rdc/files/arch/i386/kernel/cpu/rdc.c b/target/linux/rdc/files/arch/i386/kernel/cpu/rdc.c
new file mode 100644
index 000000000..f4b9083bf
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/kernel/cpu/rdc.c
@@ -0,0 +1,24 @@
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+static struct cpu_dev rdc_cpu_dev __cpuinitdata = {
+        .c_vendor       = "RDC",
+        .c_models = {
+                { .vendor = X86_VENDOR_RDC, .family = 4, .model_names =
+                  {
+                          [0] = "R861x(-G)",
+                  }
+                },
+        },
+};
+
+int __init rdc_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_RDC] = &rdc_cpu_dev;
+        return 0;
+}
diff --git a/target/linux/rdc/files/arch/i386/mach-rdc/Makefile b/target/linux/rdc/files/arch/i386/mach-rdc/Makefile
new file mode 100644
index 000000000..5961bc791
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the RDC321x specific parts of the kernel
+#
+obj-$(CONFIG_X86_RDC)        := gpio.o platform.o wdt.o
+
diff --git a/target/linux/rdc/files/arch/i386/mach-rdc/gpio.c b/target/linux/rdc/files/arch/i386/mach-rdc/gpio.c
new file mode 100644
index 000000000..dbd03270f
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/gpio.c
@@ -0,0 +1,91 @@
+/*
+ *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *  	RDC321x architecture specific GPIO support
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <asm/mach-rdc/rdc321x_defs.h>
+
+static inline int rdc_gpio_is_valid(unsigned gpio)
+{
+	return (gpio <= RDC_MAX_GPIO);
+}
+
+static unsigned int rdc_gpio_read(unsigned gpio)
+{
+	unsigned int val;
+
+	val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
+        outl(val, RDC3210_CFGREG_ADDR);
+        udelay(10);
+        val = inl(RDC3210_CFGREG_DATA);
+        val |= (0x1 << (gpio & 0x1F));
+        outl(val, RDC3210_CFGREG_DATA);
+        udelay(10);
+        val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
+        outl(val, RDC3210_CFGREG_ADDR);
+        udelay(10);
+        val = inl(RDC3210_CFGREG_DATA);
+
+	return val;
+}
+
+static void rdc_gpio_write(unsigned int val)
+{
+	if (val) {
+		outl(val, RDC3210_CFGREG_DATA);
+		udelay(10);
+	}
+}
+
+int rdc_gpio_get_value(unsigned gpio)
+{
+	if (rdc_gpio_is_valid(gpio))
+		return (int)rdc_gpio_read(gpio);
+	else
+		return -EINVAL;
+}
+EXPORT_SYMBOL(rdc_gpio_get_value);
+
+void rdc_gpio_set_value(unsigned gpio, int value)
+{
+	unsigned int val;
+
+	if (!rdc_gpio_is_valid(gpio))
+		return;
+	
+	val = rdc_gpio_read(gpio);
+
+	if (value)
+		val &= ~(0x1 << (gpio & 0x1F));
+	else
+		val |= (0x1 << (gpio & 0x1F));
+
+	rdc_gpio_write(val);
+}
+EXPORT_SYMBOL(rdc_gpio_set_value);
+
+int rdc_gpio_direction_input(unsigned gpio)
+{
+	return 0;
+}
+EXPORT_SYMBOL(rdc_gpio_direction_input);
+
+int rdc_gpio_direction_output(unsigned gpio, int value)
+{
+	return 0;
+}
+EXPORT_SYMBOL(rdc_gpio_direction_output);
+
+
diff --git a/target/linux/rdc/files/arch/i386/mach-rdc/platform.c b/target/linux/rdc/files/arch/i386/mach-rdc/platform.c
new file mode 100644
index 000000000..6809dcdd3
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/platform.c
@@ -0,0 +1,83 @@
+/*
+ *  $Id: platform.c 8331 2007-08-03 15:59:23Z florian $
+ *
+ *  Generic RDC321x platform devices
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/gpio.h>
+
+#define PFX "rdc321x: "
+
+/* FIXME : Flash */
+static struct resource rdc_flash_resource[] = {
+	[0] = {
+		.start = (u32)-CONFIG_MTD_RDC3210_SIZE,
+		.end = (u32)-1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device rdc_flash_device = {
+	.name = "rdc321x-flash",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rdc_flash_resource),
+	.resource = rdc_flash_resource,
+};
+
+/* LEDS */
+static struct platform_device rdc321x_leds = {
+	.name = "rdc321x-leds",
+	.id = -1,
+	.num_resources = 0,
+};
+
+static struct platform_device rdc321x_wdt = {
+	.name = "rdc321x-wdt",
+	.id = -1,
+	.num_resources = 0,
+};
+
+static int __init rdc_board_setup(void)
+{
+	int err;
+
+	err = platform_device_register(&rdc_flash_device);
+	if (err)
+		printk(KERN_ALERT PFX "failed to register flash\n");
+
+	err = platform_device_register(&rdc321x_leds);
+	if (err)
+		printk(KERN_ALERT PFX "failed to register LEDS\n");
+
+	err = platform_device_register(&rdc321x_wdt);
+		printk(KERN_ALERT PFX "failed to register watchdog\n");
+
+	return err; 
+}
+
+arch_initcall(rdc_board_setup);
diff --git a/target/linux/rdc/files/arch/i386/mach-rdc/wdt.c b/target/linux/rdc/files/arch/i386/mach-rdc/wdt.c
new file mode 100644
index 000000000..39956f35a
--- /dev/null
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/wdt.c
@@ -0,0 +1,272 @@
+/*
+ * RDC321x watchdog driver
+ *
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This driver is highly inspired from the cpu5_wdt driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include <asm/mach-rdc/rdc321x_defs.h>
+
+#define RDC_WDT_MASK		0x80000000	/* Mask */
+#define RDC_WDT_EN		0x00800000 	/* Enable bit */
+#define RDC_WDT_WTI		0x00200000	/* Generate a CPU reset/NMI/WDT irq when WDT timeout is reached */
+#define RDC_WDT_RST		0x00100000	/* Reset bit */
+#define RDC_WDT_WIF		0x00040000	/* WDT IRQ Flag */
+#define RDC_WDT_IRT		0x00000100	/* IRQ Routing table */
+#define RDC_WDT_CNT		0x00000001	/* WDT count */
+
+#define RDC_CLS_TMR		0x80003844	/* Clear timer */
+
+#define RDC_WDT_INTERVAL	(HZ/10+1)
+
+int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int ticks = 1000;
+
+/* some device data */
+
+static struct {
+	struct completion stop;
+	volatile int running;
+	struct timer_list timer;
+	volatile int queue;
+	int default_ticks;
+	unsigned long inuse;
+} rdc321x_wdt_device;
+
+/* generic helper functions */
+
+static void rdc321x_wdt_trigger(unsigned long unused)
+{
+	if( rdc321x_wdt_device.running )
+		ticks--;
+
+	/* keep watchdog alive */
+	outl(RDC_WDT_EN|inl(RDC3210_CFGREG_DATA), RDC3210_CFGREG_DATA);	
+	
+	/* requeue?? */
+	if (rdc321x_wdt_device.queue && ticks)
+		mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
+	else {
+		/* ticks doesn't matter anyway */
+		complete(&rdc321x_wdt_device.stop);
+	}
+
+}
+
+static void rdc321x_wdt_reset(void)
+{
+	ticks = rdc321x_wdt_device.default_ticks;
+}
+
+static void rdc321x_wdt_start(void)
+{
+	if (!rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 1;
+
+		/* Clear the timer */
+		outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
+		
+		/* Enable watchdog and set the timeout to 81.92 us */
+		outl(RDC_WDT_EN|RDC_WDT_CNT, RDC3210_CFGREG_DATA);
+
+		mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
+	}
+
+	/* if process dies, counter is not decremented */
+	rdc321x_wdt_device.running++;
+}
+
+static int rdc321x_wdt_stop(void)
+{
+	if (rdc321x_wdt_device.running)
+		rdc321x_wdt_device.running = 0;
+
+	ticks = rdc321x_wdt_device.default_ticks;
+
+	return -EIO;
+}
+
+/* filesystem operations */
+
+static int rdc321x_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
+		return -EBUSY;
+
+	return nonseekable_open(inode, file);
+}
+
+static int rdc321x_wdt_release(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+	return 0;
+}
+
+static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	unsigned int value;
+	static struct watchdog_info ident =
+	{
+		.options = WDIOF_CARDRESET,
+		.identity = "RDC321x WDT",
+	};
+
+	switch(cmd) {
+		case WDIOC_KEEPALIVE:
+			rdc321x_wdt_reset();
+			break;
+		case WDIOC_GETSTATUS:
+			/* Read the value from the DATA register */
+			value = inl(RDC3210_CFGREG_DATA);
+			if ( copy_to_user(argp, &value, sizeof(int)) )
+				return -EFAULT;
+			break;
+		case WDIOC_GETSUPPORT:
+			if ( copy_to_user(argp, &ident, sizeof(ident)) )
+				return -EFAULT;
+			break;
+		case WDIOC_SETOPTIONS:
+			if ( copy_from_user(&value, argp, sizeof(int)) )
+				return -EFAULT;
+			switch(value) {
+				case WDIOS_ENABLECARD:
+					rdc321x_wdt_start();
+					break;
+				case WDIOS_DISABLECARD:
+					return rdc321x_wdt_stop();
+				default:
+					return -EINVAL;
+			}
+			break;
+		default:
+    			return -ENOTTY;
+	}
+	return 0;
+}
+
+static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+{
+	if ( !count )
+		return -EIO;
+
+	rdc321x_wdt_reset();
+
+	return count;
+}
+
+static const struct file_operations rdc321x_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.ioctl		= rdc321x_wdt_ioctl,
+	.open		= rdc321x_wdt_open,
+	.write		= rdc321x_wdt_write,
+	.release	= rdc321x_wdt_release,
+};
+
+static struct miscdevice rdc321x_wdt_misc = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rdc321x_wdt_fops,
+};
+
+static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
+{
+	int err;
+
+	if ( (err = misc_register(&rdc321x_wdt_misc)) < 0 ) {
+		printk(KERN_ERR PFX "misc_register failed\n");
+		return err;
+	}
+
+	/* Reset the watchdog */
+	outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
+
+	init_completion(&rdc321x_wdt_device.stop);
+	rdc321x_wdt_device.queue = 0;
+
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+
+	setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
+
+	rdc321x_wdt_device.default_ticks = ticks;
+
+	printk(KERN_INFO PFX "init success\n");
+
+	return 0;
+}
+
+static int rdc321x_wdt_remove(struct platform_device *pdev)
+{
+	if (rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 0;
+		wait_for_completion(&rdc321x_wdt_device.stop);
+	}
+
+	misc_deregister(&rdc321x_wdt_misc);
+
+	return 0;
+}
+
+static struct platform_driver rdc321x_wdt_driver = {
+	.probe = rdc321x_wdt_probe,
+	.remove = rdc321x_wdt_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "rdc321x_wdt",
+	},
+};
+
+static int __init rdc321x_wdt_init(void)
+{
+	return platform_driver_register(&rdc321x_wdt_driver);
+}
+
+static void __exit rdc321x_wdt_exit(void)
+{
+	platform_driver_unregister(&rdc321x_wdt_driver);
+}
+
+module_init(rdc321x_wdt_init);
+module_exit(rdc321x_wdt_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/rdc/files/drivers/leds/leds-rdc3211.c b/target/linux/rdc/files/drivers/leds/leds-rdc3211.c
new file mode 100644
index 000000000..ae068af14
--- /dev/null
+++ b/target/linux/rdc/files/drivers/leds/leds-rdc3211.c
@@ -0,0 +1,71 @@
+/*
+ * LED driver for RDC3211 boards
+ *
+ * Copyright 2007 Florian Fainelli <florian@openwrt.org>
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+
+#include <asm/gpio.h>
+
+static void rdc321x_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
+{
+	gpio_set_value(1, brightness ? 1 : 0);
+}
+
+/* The DMZ led is at GPIO line 1 */
+static struct led_classdev rdc321x_dmz_led = {
+	.name = "rdc321x:dmz",
+	.brightness_set = rdc321x_led_set,
+};
+
+static int rdc321x_leds_probe(struct platform_device *pdev)
+{
+	return led_classdev_register(&pdev->dev, &rdc321x_dmz_led);
+}
+
+static int rdc321x_leds_remove(struct platform_device *pdev)
+{
+	led_classdev_unregister(&rdc321x_dmz_led);
+	return 0;
+}
+
+static struct platform_driver rdc321x_leds_driver = {
+	.probe = rdc321x_leds_probe,
+	.remove = rdc321x_leds_remove,
+	.driver = {
+		.name = "rdc321x-leds",
+		.owner = THIS_MODULE,
+	}
+};
+
+static int __init rdc321x_leds_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&rdc321x_leds_driver);
+
+	return ret;
+}
+		
+static void __exit rdc321x_leds_exit(void)
+{
+	platform_driver_unregister(&rdc321x_leds_driver);
+}
+
+module_init(rdc321x_leds_init);
+module_exit(rdc321x_leds_exit);
+		
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x LED driver");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/rdc/files/drivers/mtd/maps/imghdr.h b/target/linux/rdc/files/drivers/mtd/maps/imghdr.h
new file mode 100644
index 000000000..7232b7061
--- /dev/null
+++ b/target/linux/rdc/files/drivers/mtd/maps/imghdr.h
@@ -0,0 +1,25 @@
+#ifndef GT_IMGHDR_H
+#define GT_IMGHDR_H
+
+#define GTIMG_MAGIC		"GMTK"
+
+/* Product ID */
+#define PID_RTL_AIRGO		1
+#define PID_RTL_RALINK		2
+#define PID_RDC_AIRGO		3
+#define PID_RDC_RALINK		5	/* White Lable */
+
+/* Gemtek */
+typedef struct
+{
+	u8		magic[4];		/* ASICII: GMTK */
+	u32		checksum;		/* CRC32 */
+	u32		version;		/* x.x.x.x */
+	u32		kernelsz;		/* The size of the kernel image */
+	u32		imagesz;		/* The length of this image file ( kernel + romfs + this header) */
+	u32		pid;			/* Product ID */
+	u32		fastcksum;		/* Partial CRC32 on (First(256), medium(256), last(512)) */
+	u32		reserved;
+}gt_imghdr_t;
+
+#endif
diff --git a/target/linux/rdc/files/drivers/mtd/maps/rdc3210.c b/target/linux/rdc/files/drivers/mtd/maps/rdc3210.c
new file mode 100644
index 000000000..fb2a3f854
--- /dev/null
+++ b/target/linux/rdc/files/drivers/mtd/maps/rdc3210.c
@@ -0,0 +1,379 @@
+/*******************************************************************
+ * Simple Flash mapping for RDC3210                                *
+ *                                                                 *
+ *                                                     2005.03.23  *
+ *                              Dante Su (dante_su@gemtek.com.tw)  *
+ *                          Copyright (C) 2005 Gemtek Corporation  *
+ *******************************************************************/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/autoconf.h>
+#include <linux/sched.h>
+#include <linux/squashfs_fs.h>
+
+static struct mtd_info		*rdc3210_mtd;
+
+struct map_info rdc3210_map = 
+{
+	.name =		"RDC3210 Flash",
+	.size =		CONFIG_MTD_RDC3210_SIZE,
+	.bankwidth =	CONFIG_MTD_RDC3210_BUSWIDTH,
+};
+
+/* Dante: This is the default static mapping, however this is nothing but a hint. (Say dynamic mapping) */
+static struct mtd_partition rdc3210_parts[] = 
+{
+#if CONFIG_MTD_RDC3210_SIZE == 0x400000
+	{ name: "linux",   offset:  0,          size: 0x003C0000 },	/* 3840 KB = (Kernel + ROMFS) = (768 KB + 3072 KB) */
+	{ name: "romfs",   offset:  0x000C0000, size: 0x00300000 },	/* 3072 KB */
+	{ name: "nvram",   offset:  0x003C0000, size: 0x00010000 },	/*   64 KB */
+#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
+	{ name: "factory", offset:  0x003D0000, size: 0x00010000 },	/*   64 KB */
+#endif
+	{ name: "bootldr", offset:  0x003E0000, size: 0x00020000 },	/*  128 KB */
+#elif CONFIG_MTD_RDC3210_SIZE == 0x200000
+	{ name: "linux",   offset:  0x00008000, size: 0x001E8000 },
+	{ name: "romfs",   offset:  0x000C8000, size: 0x00128000 },
+	{ name: "nvram",   offset:  0x00000000, size: 0x00008000 },	/*   64 KB */
+#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
+#error Unsupported configuration!
+#endif
+	{ name: "bootldr", offset:  0x001F0000, size: 0x00010000 },
+#else
+#error Unsupported configuration!
+#endif
+};
+
+static __u32 crctab[257] = {
+	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
+	0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
+	0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+	0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
+	0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
+	0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+	0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
+	0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
+	0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+	0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
+	0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
+	0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+	0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
+	0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
+	0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
+	0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
+	0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+	0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
+	0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
+	0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+	0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
+	0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
+	0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+	0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
+	0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
+	0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+	0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
+	0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
+	0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
+	0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
+	0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+	0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
+	0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
+	0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+	0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
+	0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
+	0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+	0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
+	0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
+	0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+	0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
+	0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
+	0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
+	0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
+	0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+	0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
+	0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
+	0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+	0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
+	0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
+	0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+	0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
+	0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
+	0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+	0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
+	0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
+	0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
+	0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
+	0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+	0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
+	0
+};
+
+static __u32 crc32(__u8 * buf, __u32 len)
+{
+	register int i;
+	__u32 sum;
+	register __u32 s0;
+	s0 = ~0;
+	for (i = 0; i < len; i++) {
+		s0 = (s0 >> 8) ^ crctab[(__u8) (s0 & 0xFF) ^ buf[i]];
+	}
+	sum = ~s0;
+	return sum;
+}
+
+static void erase_callback(struct erase_info *done)
+{
+	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+	wake_up(wait_q);
+}
+
+static int erase_write (struct mtd_info *mtd, unsigned long pos, 
+			int len, const char *buf)
+{
+	struct erase_info erase;
+	DECLARE_WAITQUEUE(wait, current);
+	wait_queue_head_t wait_q;
+	size_t retlen;
+	int ret;
+
+	/*
+	 * First, let's erase the flash block.
+	 */
+
+	init_waitqueue_head(&wait_q);
+	erase.mtd = mtd;
+	erase.callback = erase_callback;
+	erase.addr = pos;
+	erase.len = len;
+	erase.priv = (u_long)&wait_q;
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&wait_q, &wait);
+
+	ret = mtd->erase(mtd, &erase);
+	if (ret) {
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&wait_q, &wait);
+		printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
+				     "on \"%s\" failed\n",
+			pos, len, mtd->name);
+		return ret;
+	}
+
+	schedule();  /* Wait for erase to finish. */
+	remove_wait_queue(&wait_q, &wait);
+
+	/*
+	 * Next, writhe data to flash.
+	 */
+
+	ret = mtd->write (mtd, pos, len, &retlen, buf);
+	if (ret)
+		return ret;
+	if (retlen != len)
+		return -EIO;
+	return 0;
+}
+
+static int __init init_rdc3210_map(void)
+{
+	rdc3210_map.phys = -rdc3210_map.size;
+       	printk(KERN_NOTICE "flash device: %x at %x\n", rdc3210_map.size, rdc3210_map.phys);
+       	
+	rdc3210_map.map_priv_1 = (unsigned long)(rdc3210_map.virt = ioremap_nocache(rdc3210_map.phys, rdc3210_map.size));
+
+	if (!rdc3210_map.map_priv_1) 
+	{
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+	rdc3210_mtd = do_map_probe("cfi_probe", &rdc3210_map);
+#ifdef CONFIG_MTD_RDC3210_STATIC_MAP	/* Dante: This is for fixed map */
+	if (rdc3210_mtd) 
+	{
+		rdc3210_mtd->module = THIS_MODULE;
+		add_mtd_partitions(rdc3210_mtd, rdc3210_parts, sizeof(rdc3210_parts)/sizeof(rdc3210_parts[0]));
+		return 0;
+	}
+#else	/* Dante: This is for dynamic mapping */
+
+#include "imghdr.h"
+
+	typedef struct {
+		u8	magic[4];
+		u32	kernelsz, ramdisksz;
+		u8	magic2[4];
+		u32	sz2;
+	}sc_imghdr_t;
+
+	if (rdc3210_mtd) 
+	{	// Dante
+		sc_imghdr_t	*hdr2= (sc_imghdr_t *)(rdc3210_map.map_priv_1);
+		gt_imghdr_t	*hdr = (gt_imghdr_t *)hdr2
+#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
+			, *ptmp
+#endif
+			;
+		int	len, tmp, tmp2, tmp3, tmp4, hdr_type = 0;
+		
+		if(!memcmp(hdr->magic, GTIMG_MAGIC, 4))
+		{
+			hdr_type = 1;
+			tmp = hdr->kernelsz + sizeof(gt_imghdr_t);
+			tmp2 = rdc3210_mtd->erasesize;
+			tmp3 = ((tmp / 32) + ((tmp % 32) ? 1 : 0)) * 32;
+			tmp4 = ((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2;
+		}
+#ifndef CONFIG_MTD_RDC3210_ALLOW_JFFS2
+		else if (!memcmp(hdr2->magic, "CSYS", 4))
+		{
+			hdr_type = 2;
+			tmp = hdr2->ramdisksz + hdr2->kernelsz + sizeof(sc_imghdr_t);
+			tmp2 = rdc3210_mtd->erasesize;
+			tmp3 = ((tmp / 32) + ((tmp % 32) ? 1 : 0)) * 32;
+			tmp4 = ((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2;
+		}
+#endif
+		else
+		{
+			iounmap((void *)rdc3210_map.map_priv_1);
+			rdc3210_map.map_priv_1 = 0L;
+			rdc3210_map.virt = NULL;
+			printk("Invalid MAGIC for Firmware Image!!!\n");
+			return -EIO;
+		}
+#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
+		tmp = (tmp3 == tmp4) ? tmp4 + tmp2 : tmp4;
+		if ((ptmp = (gt_imghdr_t *)vmalloc(tmp)) == NULL)
+		{
+			iounmap((void *)rdc3210_map.map_priv_1);
+			rdc3210_map.map_priv_1 = 0L;
+			rdc3210_map.virt = NULL;
+			printk("Can't allocate 0x%08x for flash-reading buffer!\n", tmp);
+			return -ENOMEM;
+		}
+		if (rdc3210_mtd->read(rdc3210_mtd, 0, tmp, &len, (__u8 *)ptmp) || len != tmp)
+		{
+			vfree(ptmp);
+			iounmap((void *)rdc3210_map.map_priv_1);
+			rdc3210_map.map_priv_1 = 0L;
+			rdc3210_map.virt = NULL;
+			printk("Can't read that much flash! Read 0x%08x of it.\n", len);
+			return -EIO;
+		}
+#endif
+#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
+		/* 1. Adjust Redboot */
+		tmp = rdc3210_mtd->size - rdc3210_parts[4].size;
+		rdc3210_parts[4].offset = tmp - (tmp % tmp2);
+		rdc3210_parts[4].size   = rdc3210_mtd->size - rdc3210_parts[4].offset;
+		
+		/* 2. Adjust Factory Default */
+		tmp -= rdc3210_parts[3].size;
+		rdc3210_parts[3].offset = tmp - (tmp % tmp2);
+		rdc3210_parts[3].size   = rdc3210_parts[4].offset - rdc3210_parts[3].offset;
+#else
+		/* 1. Adjust Redboot */
+		tmp = rdc3210_mtd->size - rdc3210_parts[3].size;
+		rdc3210_parts[3].offset = tmp - (tmp % tmp2);
+		rdc3210_parts[3].size   = rdc3210_mtd->size - rdc3210_parts[3].offset;
+#endif
+		if (hdr_type == 1) {
+		/* 3. Adjust NVRAM */
+#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
+		if (*(__u32 *)(((unsigned char *)ptmp)+tmp3) == SQUASHFS_MAGIC)
+		{
+			len = 1;
+			tmp4 = tmp3;
+			tmp = hdr->imagesz;
+		rdc3210_parts[2].name   = "rootfs_data";
+		rdc3210_parts[2].offset = rdc3210_parts[0].offset + (((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2);
+		}
+		else
+#else
+			tmp4 = tmp3;
+#endif
+		{
+			len = 0;
+		tmp -= rdc3210_parts[2].size;
+		rdc3210_parts[2].offset = tmp - (tmp % tmp2);
+		}
+		rdc3210_parts[2].size   = rdc3210_parts[3].offset - rdc3210_parts[2].offset;
+		}
+		else if (hdr_type == 2)
+		{
+			len = 0;
+			tmp4 = tmp3;
+		}
+		
+		/* 4. Adjust Linux (Kernel + ROMFS) */
+		rdc3210_parts[0].size   = rdc3210_parts[len + hdr_type + 1].offset - rdc3210_parts[0].offset;
+
+		/* 5. Adjust ROMFS */
+		rdc3210_parts[1].offset = rdc3210_parts[0].offset + tmp4;
+		rdc3210_parts[1].size   = rdc3210_parts[hdr_type + 1].offset - rdc3210_parts[1].offset;
+#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
+		if (!(hdr->reserved || len))
+		{
+			__u8	buf[1024];
+			ptmp->reserved = hdr->imagesz;
+			ptmp->imagesz  = tmp4;
+			ptmp->checksum = ptmp->fastcksum = 0;
+			memcpy(buf, ptmp, 0x100);
+			memcpy(buf + 0x100, ((__u8 *)ptmp) + ((tmp4 >> 1) - ((tmp4 & 0x6) >> 1)), 0x100);
+			memcpy(buf + 0x200, ((__u8 *)ptmp) + (tmp4 - 0x200), 0x200);
+			ptmp->fastcksum = crc32(buf, sizeof(buf));
+			ptmp->checksum = crc32((__u8 *)ptmp, tmp4);
+			if (rdc3210_mtd->unlock) rdc3210_mtd->unlock(rdc3210_mtd, 0, tmp2);
+			if ((len = erase_write(rdc3210_mtd, 0, tmp2, (char *)ptmp)))
+			{
+				vfree(ptmp);
+				iounmap((void *)rdc3210_map.map_priv_1);
+				rdc3210_map.map_priv_1 = 0L;
+				rdc3210_map.virt = NULL;
+				printk("Couldn't erase! Got %d.\n", len);
+				return len;
+			}
+			if (rdc3210_mtd->sync) rdc3210_mtd->sync(rdc3210_mtd);
+		}
+		vfree(ptmp);
+#endif
+		rdc3210_mtd->owner = THIS_MODULE;
+		add_mtd_partitions(rdc3210_mtd, rdc3210_parts, sizeof(rdc3210_parts)/sizeof(rdc3210_parts[0]));
+		return 0;
+	}
+#endif
+	iounmap((void *)rdc3210_map.map_priv_1);
+	rdc3210_map.map_priv_1 = 0L;
+	rdc3210_map.virt = NULL;
+	return -ENXIO;
+}
+
+static void __exit cleanup_rdc3210_map(void)
+{
+	if (rdc3210_mtd) 
+	{
+		del_mtd_partitions(rdc3210_mtd);
+		map_destroy(rdc3210_mtd);
+	}
+	
+	if (rdc3210_map.map_priv_1) 
+	{
+		iounmap((void *)rdc3210_map.map_priv_1);
+		rdc3210_map.map_priv_1 = 0L;
+		rdc3210_map.virt = NULL;
+	}
+}
+
+module_init(init_rdc3210_map);
+module_exit(cleanup_rdc3210_map);
diff --git a/target/linux/rdc/files/drivers/net/r6040.c b/target/linux/rdc/files/drivers/net/r6040.c
new file mode 100644
index 000000000..376b6ecfe
--- /dev/null
+++ b/target/linux/rdc/files/drivers/net/r6040.c
@@ -0,0 +1,1041 @@
+/* r6040.c: A RDC R6040 FastEthernet driver for linux. */
+/*
+	Re-written 2004 by Sten Wang.
+
+	Copyright 1994-2000 by Donald Becker.
+	Copyright 1993 United States Government as represented by the
+	Director, National Security Agency.	 This software may be used and
+	distributed according to the terms of the GNU General Public License,
+	incorporated herein by reference.
+
+	This driver is for RDC R6040 FastEthernet MAC series.
+	For kernel version after 2.4.22
+
+	Modification List
+	----------	------------------------------------------------
+	08-24-2006	Support at linux 2.6.10 above
+	03-24-2006	Support NAPI
+	03-21-2006	By Charies,change spin_lock_irqsave(lp->lock, flags) to
+			spin_lock_irqsave(&lp->lock, flags) in set_multicast_list
+	03-15-2006      Modify the set_multicast_list ,due to when re-plug the ethernet,
+			it will forget the previous setting
+	07-12-2005      Tim, modify the set_multicast_list
+	03-28-2005      Tim, modify some error mac register offset in 
+	                function set_multicast_list
+	03-27-2005	Tim, Add the internal state machine reset
+			Sten, If multicast address more than 4, enter PROM mode
+			Changed rdc to r6040
+	12-22-2004	Sten Init MAC MBCR register=0x012A
+			PHY_CAP = 0x01E1
+
+	Need to Do LIst:
+	1. If multicast address more than 4, use the multicast address hash
+*/
+
+#define DRV_NAME	"r6040"
+#define DRV_VERSION	"0.13"
+#define DRV_RELDATE	"24Aug2006"
+
+/* PHY CHIP Address */
+#define PHY1_ADDR	1	/* For MAC1 */
+#define PHY2_ADDR	2	/* For MAC2 */
+#define PHY_MODE	0x3100	/* PHY CHIP Register 0 */
+#define PHY_CAP		0x01E1	/* PHY CHIP Register 4 */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  	(6000 * HZ / 1000)
+#define TIMER_WUT	(jiffies + HZ * 1)/* timer wakeup time : 1 second */
+
+/* RDC MAC ID */
+#define RDC_MAC_ID	0x6040
+
+/* RDC MAC I/O Size */
+#define R6040_IO_SIZE	256
+
+/* RDC Chip PCI Command */
+#define R6040_PCI_CMD	0x0005	/* IO, Master */
+
+/* MAX RDC MAC */
+#define MAX_MAC		2
+
+/* MAC setting */
+#define TX_DCNT		0x80	/* TX descriptor count */
+#define RX_DCNT		0x80	/* RX descriptor count */
+#define MAX_BUF_SIZE	0x600
+#define ALLOC_DESC_SIZE	((TX_DCNT+RX_DCNT)*sizeof(struct r6040_descriptor)+0x10)
+#define MBCR_DEFAULT	0x012A	/* MAC Bus Control Register */
+
+/* Debug enable or not */
+#define RDC_DEBUG	0
+
+#if RDC_DEBUG > 1
+#define RDC_DBUG(msg, value) printk("%s %x\n", msg, value);
+#else
+#define RDC_DBUG(msg, value)
+#endif
+
+
+#include <linux/module.h>
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
+#include <linux/moduleparam.h>
+#endif
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>	/* for udelay() */
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/spinlock.h>
+
+#include <asm/processor.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+MODULE_AUTHOR("Sten Wang <sten.wang@rdc.com.tw>");
+MODULE_LICENSE("GPL");
+#ifdef CONFIG_R6040_NAPI
+MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet Driver");
+#else
+MODULE_DESCRIPTION("RDC R6040 PCI FastEthernet Driver");
+#endif
+
+#define R6040_INT_MASK			0x0011
+
+struct r6040_descriptor {
+	u16	status, len;		/* 0-3 */
+	u32	buf;			/* 4-7 */
+	u32	ndesc;			/* 8-B */
+	u32	rev1;			/* C-F */
+	char	*vbufp;			/* 10-13 */
+	struct r6040_descriptor *vndescp;	/* 14-17 */
+	struct sk_buff *skb_ptr;	/* 18-1B */
+	u32	rev2;			/* 1C-1F */
+} __attribute__(( aligned(32) ));
+
+struct r6040_private {
+	struct net_device_stats stats;
+	spinlock_t lock;
+  	struct timer_list timer;
+	struct pci_dev *pdev;
+
+	struct r6040_descriptor *rx_insert_ptr;
+	struct r6040_descriptor *rx_remove_ptr;
+	struct r6040_descriptor *tx_insert_ptr;
+	struct r6040_descriptor *tx_remove_ptr;
+	u16	tx_free_desc, rx_free_desc, phy_addr, phy_mode;
+	u16	mcr0, mcr1;
+	dma_addr_t desc_dma;
+	char	*desc_pool;
+	u16	switch_sig;
+};
+
+struct r6040_chip_info {
+	const char *name;
+	u16 pci_flags;
+	int io_size;
+	int drv_flags;
+};
+
+#ifdef CONFIG_R6040_NAPI
+static int NAPI_status;
+#endif
+
+static int __devinitdata printed_version;
+#ifdef CONFIG_R6040_NAPI
+static char version[] __devinitdata =
+	KERN_INFO DRV_NAME ": RDC R6040 NAPI net driver, version "DRV_VERSION " (" DRV_RELDATE ")\n";	
+#else
+static char version[] __devinitdata =
+	KERN_INFO DRV_NAME ": RDC R6040 net driver, version "DRV_VERSION " (" DRV_RELDATE ")\n";	
+#endif
+static struct r6040_chip_info r6040_chip_info[] __devinitdata =
+{
+	{ "RDC R6040 Knight", R6040_PCI_CMD, R6040_IO_SIZE, 0}
+};
+static char *parent = NULL;
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
+static int NUM_MAC_TABLE = 2 ;
+module_param(parent, charp, 0444);
+#else
+MODULE_PARM(parent, "s");
+#endif
+MODULE_PARM_DESC(parent, "Parent network device name");
+
+static int phy_table[] = { 0x1, 0x2};
+static u8 adr_table[2][8] = {{0x00, 0x00, 0x60, 0x00, 0x00, 0x01}, {0x00, 0x00, 0x60, 0x00, 0x00, 0x02}};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
+	module_param_array(adr_table, int, &NUM_MAC_TABLE, 0644);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0) 
+	module_param_array(adr_table, int, NUM_MAC_TABLE, 0644);
+#else
+	MODULE_PARM(adr_table, "2-4i");
+#endif 
+MODULE_PARM_DESC(adr_table, "MAC Address (assigned)");
+
+static int r6040_open(struct net_device *dev);
+static int r6040_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t r6040_interrupt(int irq, void *dev_id);
+static struct net_device_stats *r6040_get_stats(struct net_device *dev);
+static int r6040_close(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static struct ethtool_ops netdev_ethtool_ops;
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static void r6040_down(struct net_device *dev);
+static void r6040_up(struct net_device *dev);
+static void r6040_tx_timeout (struct net_device *dev);
+static void r6040_timer(unsigned long);
+
+static int phy_mode_chk(struct net_device *dev);
+static int phy_read(int ioaddr, int phy_adr, int reg_idx);
+static void phy_write(int ioaddr, int phy_adr, int reg_idx, int dat);
+static void rx_buf_alloc(struct r6040_private *lp,struct net_device *dev);
+#ifdef CONFIG_R6040_NAPI
+static int r6040_poll(struct net_device *netdev, int *budget);
+#endif
+
+
+static int __devinit r6040_init_one (struct pci_dev *pdev,
+					 const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	struct r6040_private *lp;
+	int ioaddr, io_size, err;
+	static int card_idx = -1; 
+	int chip_id = (int)ent->driver_data;
+
+	RDC_DBUG("r6040_init_one()", 0);
+
+	if (printed_version++)
+		printk(version);
+
+	if ((err = pci_enable_device (pdev)))
+		return err;
+
+	/* this should always be supported */
+	if (pci_set_dma_mask(pdev, 0xffffffff)) {
+		printk(KERN_ERR DRV_NAME "32-bit PCI DMA addresses not supported by the card!?\n");
+		return  -ENODEV;
+	}
+
+	/* IO Size check */
+	io_size = r6040_chip_info[chip_id].io_size;
+	if (pci_resource_len  (pdev, 0) < io_size) {
+		return  -ENODEV;
+	}
+
+	ioaddr = pci_resource_start (pdev, 0);	/* IO map base address */
+	pci_set_master(pdev);
+
+	dev = alloc_etherdev(sizeof(struct r6040_private));
+	if (dev == NULL)
+		return -ENOMEM;
+	SET_MODULE_OWNER(dev);
+
+	if (pci_request_regions(pdev, DRV_NAME)) {
+		printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+		err = -ENODEV;
+		goto err_out_disable;
+	}
+
+	/* Init system & device */
+	lp = dev->priv;
+	dev->base_addr = ioaddr;
+	dev->irq = pdev->irq;
+
+	spin_lock_init(&lp->lock);
+	pci_set_drvdata(pdev, dev);
+
+	/* Set MAC address */
+	card_idx++;
+	memcpy(dev->dev_addr, (u8 *)&adr_table[card_idx][0], 6);
+
+	/* Link new device into r6040_root_dev */
+	lp->pdev = pdev;
+
+	/* Init RDC private data */
+	lp->mcr0 = 0x1002;
+	lp->phy_addr = phy_table[card_idx];
+	lp->switch_sig = 0;
+
+	/* The RDC-specific entries in the device structure. */
+	dev->open = &r6040_open;
+	dev->hard_start_xmit = &r6040_start_xmit;
+	dev->stop = &r6040_close;
+	dev->get_stats = &r6040_get_stats;
+	dev->set_multicast_list = &set_multicast_list;
+	dev->do_ioctl = &netdev_ioctl;
+	dev->ethtool_ops = &netdev_ethtool_ops;
+	dev->tx_timeout = &r6040_tx_timeout;
+	dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_R6040_NAPI
+	dev->poll = &r6040_poll;
+	dev->weight = 64;
+#endif
+
+	/* Register net device. After this dev->name assign */
+	if ((err = register_netdev(dev))) {
+		printk(KERN_ERR DRV_NAME ": Failed to register net device\n");
+		goto err_out_res;
+	}
+
+	netif_carrier_on(dev);
+	return 0;
+
+err_out_res:
+	pci_release_regions(pdev);
+err_out_disable:
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	kfree(dev);
+
+	return err;
+}
+
+static void __devexit r6040_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	
+	unregister_netdev(dev);
+	pci_release_regions(pdev);
+	kfree(dev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static int
+r6040_open(struct net_device *dev)
+{
+	struct r6040_private *lp = dev->priv;
+	int i;
+
+	RDC_DBUG("r6040_open()", 0);
+
+	/* Request IRQ and Register interrupt handler */
+	i = request_irq(dev->irq, &r6040_interrupt, SA_SHIRQ, dev->name, dev);
+	if (i) return i;
+
+	/* Allocate Descriptor memory */
+	lp->desc_pool = pci_alloc_consistent(lp->pdev, ALLOC_DESC_SIZE, &lp->desc_dma); 
+	if (!lp->desc_pool) return -ENOMEM; 
+
+	r6040_up(dev);
+
+	netif_start_queue(dev);
+
+	if (lp->switch_sig != 0x0243)
+	{
+	/* set and active a timer process */
+	init_timer(&lp->timer);
+	lp->timer.expires = TIMER_WUT;
+	lp->timer.data = (unsigned long)dev;
+	lp->timer.function = &r6040_timer;
+	add_timer(&lp->timer);
+	}
+	return 0;
+}
+
+static void
+r6040_tx_timeout (struct net_device *dev)
+{
+	struct r6040_private *lp = dev->priv;
+	//int ioaddr = dev->base_addr;
+	//struct r6040_descriptor *descptr = lp->tx_remove_ptr;
+
+	RDC_DBUG("r6040_tx_timeout()", 0);
+
+	/* Transmitter timeout, serious problems. */
+	/* Sten: Nothing need to do so far. */
+	printk(KERN_ERR DRV_NAME ": Big Trobule, transmit timeout/n"); 
+	lp->stats.tx_errors++;
+	netif_stop_queue(dev);
+
+//printk("<RDC> XMT timedout: CR0 %x, CR40 %x, CR3C %x, CR2C %x, CR30 %x, CR34 %x, CR38 %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c), inw(ioaddr+0x2c), inw(ioaddr+0x30), inw(ioaddr+0x34), inw(ioaddr+0x38));
+
+//printk("<RDC> XMT_TO: %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
+}
+
+
+static int
+r6040_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct r6040_private *lp = dev->priv;
+	struct r6040_descriptor *descptr;
+	int ioaddr = dev->base_addr;
+	unsigned long flags;
+
+	RDC_DBUG("r6040_start_xmit()", 0);
+
+	if (skb == NULL)	/* NULL skb directly return */ 
+		return 0;
+	if (skb->len >= MAX_BUF_SIZE) {	/* Packet too long, drop it */
+		dev_kfree_skb(skb);
+		return 0;
+	}
+
+	/* Critical Section */
+	spin_lock_irqsave(&lp->lock, flags);
+
+	/* TX resource check */
+	if (!lp->tx_free_desc) { 
+		spin_unlock_irqrestore(&lp->lock, flags);
+		printk(KERN_ERR DRV_NAME ": NO TX DESC "); 
+		return 1;
+	}
+
+	/* Statistic Counter */
+	lp->stats.tx_packets++;
+	lp->stats.tx_bytes += skb->len;
+	
+	/* Set TX descriptor & Transmit it */
+	lp->tx_free_desc--;
+	descptr = lp->tx_insert_ptr;
+	if (skb->len < 0x3c) descptr->len = 0x3c;
+	else descptr->len = skb->len;
+	descptr->skb_ptr = skb;
+	descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, skb->data, skb->len, PCI_DMA_TODEVICE));
+	descptr->status = 0x8000;
+	outw(0x01, ioaddr + 0x14);
+	lp->tx_insert_ptr = descptr->vndescp;
+
+#if RDC_DEBUG
+ printk("Xmit(): %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
+#endif 
+
+	/* If no tx resource, stop */
+	if (!lp->tx_free_desc) 
+		netif_stop_queue(dev);
+
+	dev->trans_start = jiffies;
+	spin_unlock_irqrestore(&lp->lock, flags);
+	return 0;
+}
+
+/* The RDC interrupt handler. */
+static irqreturn_t
+r6040_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct r6040_private *lp;
+	struct r6040_descriptor *descptr;
+	struct sk_buff *skb_ptr;
+	int ioaddr, status;
+	unsigned long flags;
+#ifdef CONFIG_R6040_NAPI	
+	int handled = 1;
+#else
+	int handled = 0;
+#endif	
+
+	RDC_DBUG("r6040_interrupt()", 0);
+	if (dev == NULL) {
+		printk (KERN_ERR DRV_NAME ": INT() unknown device.\n");
+		return IRQ_RETVAL(handled);
+	}
+
+	lp = (struct r6040_private *)dev->priv;
+	spin_lock_irqsave(&lp->lock, flags);
+
+	/* Check MAC Interrupt status */
+	ioaddr = dev->base_addr;
+	outw(0x0, ioaddr + 0x40);	/* Mask Off RDC MAC interrupt */
+	status = inw(ioaddr + 0x3c);	/* Read INTR status and clear */
+	
+
+#ifdef CONFIG_R6040_NAPI		
+
+	    if(netif_rx_schedule_prep(dev))	
+	        {
+	        NAPI_status = status ;     
+		__netif_rx_schedule(dev);
+	        }
+	
+	spin_unlock_irqrestore(&lp->lock, flags);
+	return IRQ_RETVAL(handled);	
+#else		
+	/* TX interrupt request */
+	if (status & 0x10) {
+		handled = 1;
+		descptr = lp->tx_remove_ptr;
+		while(lp->tx_free_desc < TX_DCNT) {
+			if (descptr->status & 0x8000) break; /* Not complte */
+			skb_ptr = descptr->skb_ptr;
+			pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE);
+			dev_kfree_skb_irq(skb_ptr); /* Free buffer */
+			descptr->skb_ptr = 0;
+			descptr = descptr->vndescp; /* To next descriptor */
+			lp->tx_free_desc++;
+		}
+		lp->tx_remove_ptr = descptr;
+		if (lp->tx_free_desc) netif_wake_queue(dev);
+	} 
+
+	/* RX interrupt request */
+	if (status & 0x01) {
+		handled = 1;
+		descptr = lp->rx_remove_ptr;
+		while(lp->rx_free_desc) {
+			if (descptr->status & 0x8000) break; /* No Rx packet */
+			skb_ptr = descptr->skb_ptr;
+			descptr->skb_ptr = 0;
+			skb_ptr->dev = dev;
+			skb_put(skb_ptr, descptr->len - 4);
+			pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+             		skb_ptr->protocol = eth_type_trans(skb_ptr, dev);
+             		netif_rx(skb_ptr);  /* Send to upper layer */
+			lp->stats.rx_packets++;
+			lp->stats.rx_bytes += descptr->len;
+			descptr = descptr->vndescp; /* To next descriptor */
+			lp->rx_free_desc--;
+		}
+		lp->rx_remove_ptr = descptr;
+	}
+
+	/* Allocate new RX buffer */
+	if (lp->rx_free_desc < RX_DCNT) rx_buf_alloc(lp,dev);
+
+	outw(R6040_INT_MASK, ioaddr + 0x40);	/* TX/RX interrupt enable */
+	spin_unlock_irqrestore(&lp->lock, flags);
+#endif
+	return IRQ_RETVAL(handled);
+}
+
+
+static struct net_device_stats *
+r6040_get_stats(struct net_device *dev)
+{
+	struct r6040_private *lp = dev->priv;
+
+	RDC_DBUG("r6040_get_stats()", 0);
+	return &lp->stats;
+}
+
+/*
+ *     Set or clear the multicast filter for this adaptor.
+ */
+static void
+set_multicast_list(struct net_device *dev)
+{
+	struct r6040_private *lp = dev->priv;
+	struct dev_mc_list *mcptr;
+	int ioaddr = dev->base_addr;
+	u16 *adrp, i;
+	unsigned long flags;
+
+	RDC_DBUG("set_multicast_list()", 0);
+
+	/* MAC Address */	
+	adrp = (u16 *) dev->dev_addr;
+	outw(adrp[0], ioaddr + 0x68); 
+	outw(adrp[1], ioaddr + 0x6A); 
+	outw(adrp[2], ioaddr + 0x6C); 
+
+
+#if RDC_DEBUG 
+	printk("MAC ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]);
+#endif
+
+	/* Promiscous Mode */
+	spin_lock_irqsave(&lp->lock, flags);
+	i = inw(ioaddr) & ~0x0120;		/* Clear AMCP & PROM */
+	if (dev->flags & IFF_PROMISC)
+	    {	
+	 	i |= 0x0020;
+		lp->mcr0 |= 0x0020 ;
+	    }
+	if (dev->mc_count > 4) i |= 0x0020;	/* Too many multicast address */
+	outw(i, ioaddr);
+	spin_unlock_irqrestore(&lp->lock, flags);
+	
+	/* Multicast Address */
+	if (dev->mc_count > 4)	/* Wait to do: Hash Table for multicast */
+		return;
+
+	/* Multicast Address 1~4 case */
+	for (i = 0, mcptr = dev->mc_list; (i<dev->mc_count) && (i<4); i++) {
+		adrp = (u16 *)mcptr->dmi_addr;
+		outw(adrp[0], ioaddr + 0x70 + 8*i); 
+		outw(adrp[1], ioaddr + 0x72 + 8*i); 
+		outw(adrp[2], ioaddr + 0x74 + 8*i); 
+		mcptr = mcptr->next;
+#if RDC_DEBUG 
+	printk("M_ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]);
+#endif
+	}
+	for (i = dev->mc_count; i < 4; i++) {
+		outw(0xffff, ioaddr + 0x68 + 8*i); 
+		outw(0xffff, ioaddr + 0x6A + 8*i); 
+		outw(0xffff, ioaddr + 0x6C + 8*i); 
+	}
+}
+
+static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct r6040_private *rp = dev->priv;
+
+	strcpy (info->driver, DRV_NAME);
+	strcpy (info->version, DRV_VERSION);
+	strcpy (info->bus_info, pci_name(rp->pdev));
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+};
+
+static int
+r6040_close(struct net_device *dev)
+{
+	struct r6040_private *lp = dev->priv;
+
+	RDC_DBUG("r6040_close()", 0);
+
+ 	/* deleted timer */
+ 	del_timer_sync(&lp->timer);
+
+	spin_lock_irq(&lp->lock);
+
+	netif_stop_queue(dev);
+
+	r6040_down(dev);
+
+	spin_unlock_irq(&lp->lock);
+
+	return 0;
+}
+
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct r6040_private *lp = dev->priv;
+
+	RDC_DBUG("netdev_ioctl()", 0);
+	if (lp->switch_sig == 0x0243 && cmd == SIOCDEVPRIVATE)
+	{
+		unsigned long *data = (unsigned long *)rq->ifr_data, args[4];
+		int ioaddr = dev->base_addr;
+		unsigned int val;
+
+		data = (unsigned long *)rq->ifr_data;
+		if (copy_from_user(args, data, 4*sizeof(unsigned long)))
+			return -EFAULT;
+
+		/* port priority */
+		if(args[0]&(1<<31))phy_write(ioaddr,29,19,(phy_read(ioaddr,29,19)|0x2000));	/* port 0 */
+		if(args[0]&(1<<29))phy_write(ioaddr,29,19,(phy_read(ioaddr,29,19)|0x0020));	/* port 1 */
+		if(args[0]&(1<<27))phy_write(ioaddr,29,20,(phy_read(ioaddr,29,20)|0x2000));	/* port 2 */
+		if(args[0]&(1<<25))phy_write(ioaddr,29,20,(phy_read(ioaddr,29,20)|0x0020));	/* port 3 */
+
+	} 
+	return -EOPNOTSUPP;
+}
+
+/**
+	Stop RDC MAC and Free the allocated resource
+ */
+static void r6040_down(struct net_device *dev)
+{
+	struct r6040_private *lp = dev->priv;
+	int i;
+	int ioaddr = dev->base_addr;
+
+	RDC_DBUG("r6040_down()", 0);
+
+	/* Stop MAC */
+	outw(0x0000, ioaddr + 0x40);	/* Mask Off Interrupt */
+	outw(0x0001, ioaddr + 0x04);	/* Reset RDC MAC */
+	i = 0;
+	do{}while((i++ < 2048) && (inw(ioaddr + 0x04) & 0x1));
+	
+	free_irq(dev->irq, dev);
+
+	/* Free RX buffer */
+	for (i = 0; i < RX_DCNT; i++) {
+		if (lp->rx_insert_ptr->skb_ptr) {
+			pci_unmap_single(lp->pdev, lp->rx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(lp->rx_insert_ptr->skb_ptr);
+			lp->rx_insert_ptr->skb_ptr = 0;
+		}
+		lp->rx_insert_ptr = lp->rx_insert_ptr->vndescp;
+	}
+
+	/* Free TX buffer */
+	for (i = 0; i < TX_DCNT; i++) {
+		if (lp->tx_insert_ptr->skb_ptr) {
+			pci_unmap_single(lp->pdev, lp->tx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_TODEVICE);
+			dev_kfree_skb(lp->tx_insert_ptr->skb_ptr);
+			lp->rx_insert_ptr->skb_ptr = 0;
+		}
+		lp->tx_insert_ptr = lp->tx_insert_ptr->vndescp;
+	}
+
+	/* Free Descriptor memory */
+	pci_free_consistent(lp->pdev, ALLOC_DESC_SIZE, lp->desc_pool, lp->desc_dma);
+}
+
+
+
+#ifdef CONFIG_R6040_NAPI
+static int r6040_poll(struct net_device *dev, int *budget)
+{
+	struct r6040_private *lp;
+	struct r6040_descriptor *descptr;
+	struct sk_buff *skb_ptr;
+	int ioaddr, status;
+	unsigned long flags;
+	
+	
+	ioaddr = dev->base_addr;	
+	lp = (struct r6040_private *)dev->priv;
+	unsigned long rx_work = dev->quota ;
+	unsigned long rx ;
+	
+	
+#if 1
+	/* TX interrupt request */
+	if (NAPI_status & 0x10) {
+		
+		descptr = lp->tx_remove_ptr;
+		while(lp->tx_free_desc < TX_DCNT) {
+			if (descptr->status & 0x8000) break; /* Not complte */
+			skb_ptr = descptr->skb_ptr;
+			pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE);
+			dev_kfree_skb_irq(skb_ptr); /* Free buffer */
+			descptr->skb_ptr = 0;
+			descptr = descptr->vndescp; /* To next descriptor */
+			lp->tx_free_desc++;
+		}
+		lp->tx_remove_ptr = descptr;
+		if (lp->tx_free_desc) netif_wake_queue(dev);
+	} 
+#endif	
+#if 1
+	/* RX interrupt request */
+	if (NAPI_status & 0x01) {		
+		
+		descptr = lp->rx_remove_ptr;
+		while(lp->rx_free_desc) {
+			if (descptr->status & 0x8000) break; /* No Rx packet */
+			skb_ptr = descptr->skb_ptr;
+			descptr->skb_ptr = 0;
+			skb_ptr->dev = dev;
+			skb_put(skb_ptr, descptr->len - 4);
+			pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+             		skb_ptr->protocol = eth_type_trans(skb_ptr, dev);             		  
+             		netif_receive_skb(skb_ptr); /* Send to upper layer */
+			lp->stats.rx_packets++;
+			lp->stats.rx_bytes += descptr->len;
+			descptr = descptr->vndescp; /* To next descriptor */
+			lp->rx_free_desc--;
+		}
+		lp->rx_remove_ptr = descptr;
+		
+	}
+	/* Allocate new RX buffer */
+	if (lp->rx_free_desc < RX_DCNT) rx_buf_alloc(lp,dev);
+	
+	local_irq_disable();
+	netif_rx_complete(dev);
+	outw(R6040_INT_MASK,ioaddr + 0x40);	
+	local_irq_enable();
+	return 0;
+#endif		
+}
+#endif
+
+/* Init RDC MAC */
+static void r6040_up(struct net_device *dev)
+{
+	struct r6040_private *lp = dev->priv;
+	struct r6040_descriptor *descptr;
+	int i;
+	int ioaddr = dev->base_addr;
+	u32 tmp_addr;
+	dma_addr_t desc_dma, start_dma;
+	
+	RDC_DBUG("r6040_up()", 0);
+
+	/* Initilize */
+	lp->tx_free_desc = TX_DCNT;
+	lp->rx_free_desc = 0;
+
+	/* Init descriptor */
+	memset(lp->desc_pool, 0, ALLOC_DESC_SIZE); /* Let all descriptor = 0 */
+	lp->tx_insert_ptr = (struct r6040_descriptor *)lp->desc_pool;
+	lp->tx_remove_ptr = lp->tx_insert_ptr;
+	lp->rx_insert_ptr = (struct r6040_descriptor *)lp->tx_insert_ptr+TX_DCNT;
+	lp->rx_remove_ptr = lp->rx_insert_ptr;
+	
+	/* Init TX descriptor */
+	descptr = lp->tx_insert_ptr;
+	desc_dma = lp->desc_dma;
+	start_dma = desc_dma;
+	for (i = 0; i < TX_DCNT; i++) {
+		descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct r6040_descriptor));
+		descptr->vndescp = (descptr + 1);
+		descptr = (descptr + 1);
+		desc_dma += sizeof(struct r6040_descriptor);
+	}
+	(descptr - 1)->ndesc = cpu_to_le32(start_dma);
+	(descptr - 1)->vndescp = lp->tx_insert_ptr;
+
+	/* Init RX descriptor */
+	start_dma = desc_dma;
+	descptr = lp->rx_insert_ptr;
+	for (i = 0; i < RX_DCNT; i++) {
+		descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct r6040_descriptor));
+		descptr->vndescp = (descptr + 1);
+		descptr = (descptr + 1);
+		desc_dma += sizeof(struct r6040_descriptor);
+	}
+	(descptr - 1)->ndesc = cpu_to_le32(start_dma);
+	(descptr - 1)->vndescp = lp->rx_insert_ptr;
+
+	/* Allocate buffer for RX descriptor */
+	rx_buf_alloc(lp,dev);
+
+#if RDC_DEBUG 
+descptr = lp->tx_insert_ptr;
+for (i = 0; i < TX_DCNT; i++) {
+ printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
+ descptr = descptr->vndescp;
+}
+descptr = lp->rx_insert_ptr;
+for (i = 0; i < RX_DCNT; i++) {
+ printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
+ descptr = descptr->vndescp;
+}
+#endif
+
+	/* MAC operation register */
+	outw(0x01, ioaddr+0x04);	/* Reset MAC */
+        outw(2   , ioaddr+0xAC);        /* Reset internal state machine */
+	outw(0   , ioaddr+0xAC);
+	udelay(5000);
+
+	/* TX and RX descriptor start Register */
+	tmp_addr = cpu_to_le32(lp->tx_insert_ptr);
+	tmp_addr = virt_to_bus((volatile void *)tmp_addr);
+	outw((u16) tmp_addr, ioaddr+0x2c);
+	outw(tmp_addr >> 16, ioaddr+0x30);
+	tmp_addr = cpu_to_le32(lp->rx_insert_ptr);
+	tmp_addr = virt_to_bus((volatile void *)tmp_addr);
+	outw((u16) tmp_addr, ioaddr+0x34);
+	outw(tmp_addr >> 16, ioaddr+0x38);
+
+	/* Buffer Size Register */
+	outw(MAX_BUF_SIZE, ioaddr+0x18);
+
+	if ((lp->switch_sig = phy_read(ioaddr, 0, 2)) == 0x0243)	// ICPlus IP175C Signature
+	{
+		phy_write(ioaddr, 29,31, 0x175C);	//Enable registers
+		lp->phy_mode = 0x8000;
+	} else {
+		/* PHY Mode Check */
+		phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
+		phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
+
+		if (PHY_MODE == 0x3100)
+			lp->phy_mode = phy_mode_chk(dev);
+		else
+			lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
+	}
+	/* MAC Bus Control Register */
+	outw(MBCR_DEFAULT, ioaddr+0x8);
+
+	/* MAC TX/RX Enable */
+	lp->mcr0 |= lp->phy_mode;
+	outw(lp->mcr0, ioaddr);
+
+	/* set interrupt waiting time and packet numbers */
+	outw(0x0802, ioaddr + 0x0C);
+	outw(0x0802, ioaddr + 0x10);
+
+	/* upgrade performance (by RDC guys) */
+	phy_write(ioaddr,30,17,(phy_read(ioaddr,30,17)|0x4000));        //bit 14=1
+	phy_write(ioaddr,30,17,~((~phy_read(ioaddr,30,17))|0x2000));    //bit 13=0
+	phy_write(ioaddr,0,19,0x0000);
+	phy_write(ioaddr,0,30,0x01F0);
+
+	/* Interrupt Mask Register */
+	outw(R6040_INT_MASK, ioaddr + 0x40);
+}
+
+/*
+  A periodic timer routine
+	Polling PHY Chip Link Status
+*/
+static void r6040_timer(unsigned long data)
+{
+ 	struct net_device *dev=(struct net_device *)data;
+	struct r6040_private *lp = dev->priv;
+	u16 ioaddr = dev->base_addr, phy_mode;
+ 
+ 	RDC_DBUG("r6040_timer()", 0);
+
+	/* Polling PHY Chip Status */
+	if (PHY_MODE == 0x3100) 
+		phy_mode = phy_mode_chk(dev);
+	else phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
+
+	if (phy_mode != lp->phy_mode) {
+		lp->phy_mode = phy_mode;
+		lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode;
+		outw(lp->mcr0, ioaddr);
+		printk("<RDC> Link Change %x \n", inw(ioaddr));
+	}
+
+	/* Debug */
+//	printk("<RDC> Timer: CR0 %x CR40 %x CR3C %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c));
+
+ 	/* Timer active again */
+ 	lp->timer.expires = TIMER_WUT;
+ 	add_timer(&lp->timer);
+}
+
+/* Allocate skb buffer for rx descriptor */
+static void rx_buf_alloc(struct r6040_private *lp,struct net_device *dev)
+{
+	struct r6040_descriptor *descptr;
+	int ioaddr = dev->base_addr ;
+
+	RDC_DBUG("rx_buf_alloc()", 0);
+	descptr = lp->rx_insert_ptr;
+	while(lp->rx_free_desc < RX_DCNT){
+		descptr->skb_ptr = dev_alloc_skb(MAX_BUF_SIZE);
+		if (!descptr->skb_ptr) break;
+		descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, descptr->skb_ptr->tail, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE));
+		descptr->status = 0x8000;
+		descptr = descptr->vndescp;
+		lp->rx_free_desc++;
+		outw(lp->mcr0 | 0x0002, ioaddr);	//Trigger Rx DMA
+	}
+	lp->rx_insert_ptr = descptr;
+}
+
+/* Status of PHY CHIP */
+static int phy_mode_chk(struct net_device *dev)
+{
+	struct r6040_private *lp = dev->priv;
+	int ioaddr = dev->base_addr, phy_dat;
+
+	RDC_DBUG("phy_mode_chk()", 0);
+
+	/* PHY Link Status Check */
+	phy_dat = phy_read(ioaddr, lp->phy_addr, 1);
+	if (!(phy_dat & 0x4)) return 0x8000;	/* Link Failed, full duplex */
+
+	/* PHY Chip Auto-Negotiation Status */
+	phy_dat = phy_read(ioaddr, lp->phy_addr, 1);
+	if (phy_dat & 0x0020) {
+		/* Auto Negotiation Mode */
+		phy_dat = phy_read(ioaddr, lp->phy_addr, 5);
+		phy_dat &= phy_read(ioaddr, lp->phy_addr, 4);
+		if (phy_dat & 0x140) phy_dat = 0x8000;
+		else phy_dat = 0;
+	} else {
+		/* Force Mode */
+		phy_dat = phy_read(ioaddr, lp->phy_addr, 0);
+		if (phy_dat & 0x100) phy_dat = 0x8000;
+		else phy_dat = 0x0000;
+	}
+
+	return phy_dat;
+};
+
+/* Read a word data from PHY Chip */
+static int phy_read(int ioaddr, int phy_addr, int reg_idx)
+{
+	int i = 0;
+
+	RDC_DBUG("phy_read()", 0);
+	outw(0x2000 + reg_idx + (phy_addr << 8), ioaddr + 0x20);
+	do{}while( (i++ < 2048) && (inw(ioaddr + 0x20) & 0x2000) );
+
+	return inw(ioaddr + 0x24);
+}
+
+/* Write a word data from PHY Chip */
+static void phy_write(int ioaddr, int phy_addr, int reg_idx, int dat)
+{
+	int i = 0;
+
+	RDC_DBUG("phy_write()", 0);
+	outw(dat, ioaddr + 0x28);
+	outw(0x4000 + reg_idx + (phy_addr << 8), ioaddr + 0x20);
+	do{}while( (i++ < 2048) && (inw(ioaddr + 0x20) & 0x4000) );
+}
+
+enum {
+	RDC_6040 = 0
+};
+
+static struct pci_device_id r6040_pci_tbl[] = {
+	{0x17F3, 0x6040, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040},
+	//{0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040},
+	{0,}			/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, r6040_pci_tbl);
+
+static struct pci_driver r6040_driver = {
+	.name		= "r6040",
+	.id_table	= r6040_pci_tbl,
+	.probe		= r6040_init_one,
+	.remove		= __devexit_p(r6040_remove_one),
+};
+
+
+static int __init r6040_init (void)
+{
+	RDC_DBUG("r6040_init()", 0);
+
+	printk(version);
+	printed_version = 1;
+
+	if (parent != NULL)
+	{
+		struct net_device *the_parent = dev_get_by_name(parent);
+
+		if (the_parent == NULL)
+		{
+			printk (KERN_ERR DRV_NAME ": Unknown device \"%s\" specified.\n", parent);
+			return -EINVAL;
+		}
+		memcpy((u8 *)&adr_table[0][0], the_parent->dev_addr, 6);
+		memcpy((u8 *)&adr_table[1][0], the_parent->dev_addr, 6);
+		++*(u8 *)&adr_table[0][5];
+	}
+	return pci_register_driver (&r6040_driver);
+}
+
+
+static void __exit r6040_cleanup (void)
+{
+	RDC_DBUG("r6040_cleanup()", 0);
+	pci_unregister_driver (&r6040_driver);
+}
+
+module_init(r6040_init);
+module_exit(r6040_cleanup);
+
+
+/*
+ * Local variables:
+ *  compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c r6040.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */
diff --git a/target/linux/rdc/files/include/asm-i386/gpio.h b/target/linux/rdc/files/include/asm-i386/gpio.h
new file mode 100644
index 000000000..ff87fca0c
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-i386/gpio.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_I386_GPIO_H
+#define _ASM_I386_GPIO_H
+
+#include <gpio.h>
+
+#endif /* _ASM_I386_GPIO_H */
diff --git a/target/linux/rdc/files/include/asm-i386/mach-generic/gpio.h b/target/linux/rdc/files/include/asm-i386/mach-generic/gpio.h
new file mode 100644
index 000000000..5305dcb96
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-i386/mach-generic/gpio.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MACH_GENERIC_GPIO_H
+#define __ASM_MACH_GENERIC_GPIO_H
+
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+
+#include <asm-generic/gpio.h>           /* cansleep wrappers */
+
+#endif /* __ASM_MACH_GENERIC_GPIO_H */
diff --git a/target/linux/rdc/files/include/asm-i386/mach-rdc/gpio.h b/target/linux/rdc/files/include/asm-i386/mach-rdc/gpio.h
new file mode 100644
index 000000000..2368bd758
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-i386/mach-rdc/gpio.h
@@ -0,0 +1,56 @@
+#ifndef _RDC_GPIO_H
+#define _RDC_GPIO_H
+
+extern int rdc_gpio_get_value(unsigned gpio);
+extern void rdc_gpio_set_value(unsigned gpio, int value);
+extern int rdc_gpio_direction_input(unsigned gpio);
+extern int rdc_gpio_direction_output(unsigned gpio, int value);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+        /* Not yet implemented */
+        return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+        /* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+        return rdc_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+        return rdc_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+        return rdc_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+        rdc_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+        return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+        return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _RDC_GPIO_H_ */
diff --git a/target/linux/rdc/files/include/asm-i386/mach-rdc/rdc321x_defs.h b/target/linux/rdc/files/include/asm-i386/mach-rdc/rdc321x_defs.h
new file mode 100644
index 000000000..838ba8f64
--- /dev/null
+++ b/target/linux/rdc/files/include/asm-i386/mach-rdc/rdc321x_defs.h
@@ -0,0 +1,6 @@
+#define PFX	"rdc321x: "
+
+/* General purpose configuration and data registers */
+#define RDC3210_CFGREG_ADDR     0x0CF8
+#define RDC3210_CFGREG_DATA     0x0CFC
+#define RDC_MAX_GPIO		0x3A
diff --git a/target/linux/rdc/image/Makefile b/target/linux/rdc/image/Makefile
new file mode 100644
index 000000000..52e4f4a39
--- /dev/null
+++ b/target/linux/rdc/image/Makefile
@@ -0,0 +1,49 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Image/Prepare
+	$(CP) $(LINUX_DIR)/arch/i386/boot/bzImage $(KDIR)/bzImage
+endef
+
+define trxalign/jffs2-128k
+bs=128k
+endef
+define trxalign/jffs2-64k
+bs=64k
+endef
+define trxalign/squashfs
+bs=1024
+endef
+
+define Image/Build/ar525w
+	touch $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+	mv $(KDIR)/root.$(1) $(KDIR)/root.tmp
+	dd of=$(KDIR)/root.$(1) if=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
+	$(RM) $(KDIR)/root.tmp
+	$(STAGING_DIR_HOST)/bin/airlink -b 1 -j $(shell bash -c 'echo $$[$(3)]') $(KDIR)/bzImage $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+endef
+
+define Image/Build/wl153
+	ls -l $(KDIR)/bzImage | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/bzSize
+	gzip -9c $(KDIR)/root.$(1) > $(KDIR)/root.$(1).gz
+	ls -l $(KDIR)/root.$(1).gz | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/rdSize
+	echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/bzSize)\x$$$$(cut -c 5,6 < $(KDIR)/bzSize)\x$$$$(cut -c 3,4 < $(KDIR)/bzSize)\x$$$$(cut -c 1,2 < $(KDIR)/bzSize)" > $(KDIR)/bzSize.tmp
+	echo -n 'CSYS' > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+	cat $(KDIR)/bzSize.tmp >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+	echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/rdSize)\x$$$$(cut -c 5,6 < $(KDIR)/rdSize)\x$$$$(cut -c 3,4 < $(KDIR)/rdSize)\x$$$$(cut -c 1,2 < $(KDIR)/rdSize)WRRM" >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+	cat $(KDIR)/bzSize.tmp $(KDIR)/bzImage $(KDIR)/root.$(1).gz >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+	$(RM) $(KDIR)/bzSize.tmp $(KDIR)/bzSize $(KDIR)/rdSize
+endef
+
+define Image/Build
+	$(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).bzImage
+	$(call Image/Build/$(PROFILE),$(1),$(PROFILE),$(patsubst jffs2-%k,%,$(1)))
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/rdc/patches/000-rdc_fixes.patch b/target/linux/rdc/patches/000-rdc_fixes.patch
new file mode 100644
index 000000000..306fac79a
--- /dev/null
+++ b/target/linux/rdc/patches/000-rdc_fixes.patch
@@ -0,0 +1,71 @@
+diff -urN linux-2.6.19/arch/i386/Kconfig linux-2.6.19.new/arch/i386/Kconfig
+--- linux-2.6.19/arch/i386/Kconfig	2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/arch/i386/Kconfig	2006-12-17 17:13:33.000000000 +0100
+@@ -180,6 +180,14 @@
+ 	  Only choose this option if you have such a system, otherwise you
+ 	  should say N here.
+ 
++config X86_RDC
++	bool "Support for RDC 3211 boards"
++	help
++	  Support for RDC 3211 systems. Say 'Y' here if the kernel is 
++	  supposed to run on an IA-32 RDC R3211 system.
++	  Only choose this option if you have such as system, otherwise you
++	  should say N here.
++
+ endchoice
+ 
+ config ACPI_SRAT
+diff -urN linux-2.6.19/arch/i386/Makefile linux-2.6.19.new/arch/i386/Makefile
+--- linux-2.6.19/arch/i386/Makefile	2006-11-29 22:57:37.000000000 +0100
++++ linux-2.6.19.new/arch/i386/Makefile	2006-12-17 17:13:33.000000000 +0100
+@@ -92,6 +92,10 @@
+ mflags-$(CONFIG_X86_ES7000)	:= -Iinclude/asm-i386/mach-es7000
+ mcore-$(CONFIG_X86_ES7000)	:= mach-default
+ core-$(CONFIG_X86_ES7000)	:= arch/i386/mach-es7000/
++# RDC subarch support
++mflags-$(CONFIG_X86_RDC)	:= -Iinclude/asm-i386/mach-rdc
++mcore-$(CONFIG_X86_RDC)		:= mach-default
++core-$(CONFIG_X86_RDC)		+= arch/i386/mach-rdc/
+ 
+ # default subarch .h files
+ mflags-y += -Iinclude/asm-i386/mach-default
+--- timex.h	2007-08-07 10:44:03.816112250 -0700
++++ linux/include/asm-i386/timex.h	2007-08-07 10:48:47.905866750 -0700
+@@ -11,6 +11,8 @@
+ 
+ #ifdef CONFIG_X86_ELAN
+ #  define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */
++#elif defined(CONFIG_X86_RDC)
++#  define CLOCK_TICK_RATE 1041667 /* Underlying HZ for R8610 */
+ #else
+ #  define CLOCK_TICK_RATE 1193182 /* Underlying HZ */
+ #endif
+--- reboot_fixups.c	2007-08-07 12:02:00.908412250 -0700
++++ linux/arch/i386/kernel/reboot_fixups.c	2007-08-07 12:18:49.391438500 -0700
+@@ -13,6 +13,17 @@
+ #include <linux/pci.h>
+ #include <asm/reboot_fixups.h>
+ #include <asm/msr.h>
++
++static void r8610_reset(struct pci_dev *dev)
++{
++	int i;
++
++	outl(0x80003840,0xCF8);
++	i=inl(0xCFC);
++	i |= 0x1600;
++	outl(i,0xCFC);
++	outb(1,0x92);
++}
+ 
+ static void cs5530a_warm_reset(struct pci_dev *dev)
+ {
+@@ -40,6 +53,7 @@
+ };
+ 
+ static struct device_fixup fixups_table[] = {
++{ 0x17F3, 0x6030, r8610_reset },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
+ };
diff --git a/target/linux/rdc/patches/001-rdc3210_flash_map.patch b/target/linux/rdc/patches/001-rdc3210_flash_map.patch
new file mode 100644
index 000000000..0c407a114
--- /dev/null
+++ b/target/linux/rdc/patches/001-rdc3210_flash_map.patch
@@ -0,0 +1,65 @@
+diff -urN linux-2.6.17/drivers/mtd/maps/Kconfig linux-2.6.17.new/drivers/mtd/maps/Kconfig
+--- linux-2.6.17/drivers/mtd/maps/Kconfig	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17.new/drivers/mtd/maps/Kconfig	2006-09-24 20:28:11.000000000 +0200
+@@ -76,6 +76,50 @@
+ 	  PNC-2000 is the name of Network Camera product from PHOTRON
+ 	  Ltd. in Japan. It uses CFI-compliant flash.
+ 
++config MTD_RDC3210
++	tristate "CFI Flash device mapped on RDC3210"
++	depends on X86 && MTD_CFI && MTD_PARTITIONS
++	help
++	  RDC-3210 is the flash device we find on Ralink reference board.
++
++config MTD_RDC3210_STATIC_MAP
++	bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
++	select MTD_RDC3210_FACTORY_PRESENT
++	help
++	  The mapping driver will use the static partition map for the
++	  RDC-3210 flash device.
++
++config MTD_RDC3210_FACTORY_PRESENT
++	bool "Reserve a partition on RDC3210 for factory presets"
++	depends on MTD_RDC3210
++	default y
++	help
++	  The mapping driver will reserve a partition on the RDC-3210 flash
++	  device for resetting flash contents to factory defaults.
++
++config MTD_RDC3210_ALLOW_JFFS2
++	bool "JFFS2 filesystem usable in a partition on RDC3210"
++	depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
++	help
++	  The mapping driver will align a partition on the RDC-3210 flash
++	  device to an erase-block boundary so that a JFFS2 filesystem may
++	  reside on it.
++
++config MTD_RDC3210_SIZE
++	hex "Amount of flash memory on RDC3210"
++	depends on MTD_RDC3210
++	default "0x400000"
++	help
++	  Total size in bytes of the RDC-3210 flash device
++
++config MTD_RDC3210_BUSWIDTH
++	int "Width of CFI Flash device mapped on RDC3210"
++	depends on MTD_RDC3210
++	default "2"
++	help
++	  Number of bytes addressed on the RDC-3210 flash device before
++	  addressing the same chip again
++
+ config MTD_SC520CDP
+ 	tristate "CFI Flash device mapped on AMD SC520 CDP"
+ 	depends on X86 && MTD_CFI && MTD_CONCAT
+diff -urN linux-2.6.17/drivers/mtd/maps/Makefile linux-2.6.17.new/drivers/mtd/maps/Makefile
+--- linux-2.6.17/drivers/mtd/maps/Makefile	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17.new/drivers/mtd/maps/Makefile	2006-09-24 20:26:10.000000000 +0200
+@@ -28,6 +28,7 @@
+ obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
+ obj-$(CONFIG_MTD_PNC2000)	+= pnc2000.o
+ obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
++obj-$(CONFIG_MTD_RDC3210)	+= rdc3210.o
+ obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
+ obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
diff --git a/target/linux/rdc/patches/002-r6040_ethernet.patch b/target/linux/rdc/patches/002-r6040_ethernet.patch
new file mode 100644
index 000000000..1b9302524
--- /dev/null
+++ b/target/linux/rdc/patches/002-r6040_ethernet.patch
@@ -0,0 +1,39 @@
+diff -urN linux-2.6.17/drivers/net/Kconfig linux-2.6.17.new/drivers/net/Kconfig
+--- linux-2.6.17/drivers/net/Kconfig	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17.new/drivers/net/Kconfig	2006-09-25 13:14:27.000000000 +0200
+@@ -1358,6 +1358,24 @@
+ 	  <file:Documentation/networking/net-modules.txt>.  The module will be
+ 	  called apricot.
+ 
++config R6040
++	tristate "RDC Fast-Ethernet support (EXPERIMENTAL)"
++	depends on NET_PCI && EXPERIMENTAL
++	select MII
++	help
++	  If you have a network (Ethernet) controller of this type, say Y and
++	  read the Ethernet-HOWTO, available from
++          <http://www.tldp.org/docs.html#howto>.
++
++          To compile this driver as a module, choose M here and read
++          <file:Documentation/networking/net-modules.txt>.  The module will be
++          called r6040.
++
++
++config R6040_NAPI
++	bool "NAPI support for R6040"
++	depends on R6040
++	default y
+ config B44
+ 	tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
+ 	depends on NET_PCI && PCI && EXPERIMENTAL
+diff -urN linux-2.6.17/drivers/net/Makefile linux-2.6.17.new/drivers/net/Makefile
+--- linux-2.6.17/drivers/net/Makefile	2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17.new/drivers/net/Makefile	2006-09-25 13:14:45.000000000 +0200
+@@ -106,6 +106,7 @@
+ obj-$(CONFIG_NE3210) += ne3210.o 8390.o
+ obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
+ obj-$(CONFIG_B44) += b44.o
++obj-$(CONFIG_R6040) += r6040.o
+ obj-$(CONFIG_FORCEDETH) += forcedeth.o
+ obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+ 
diff --git a/target/linux/rdc/patches/003-rootfstype.patch b/target/linux/rdc/patches/003-rootfstype.patch
new file mode 100644
index 000000000..34ac3d0a7
--- /dev/null
+++ b/target/linux/rdc/patches/003-rootfstype.patch
@@ -0,0 +1,11 @@
+--- linux-2.6.19.2/init/do_mounts.c	2007-01-10 11:10:37.000000000 -0800
++++ foo/init/do_mounts.c	2007-04-05 13:15:37.000000000 -0700
+@@ -243,6 +243,8 @@
+ {
+ 	char *s = page;
+ 
++	if (!root_fs_names)
++		root_fs_names = "squashfs,jffs2";
+ 	if (root_fs_names) {
+ 		strcpy(page, root_fs_names);
+ 		while (*s++) {
diff --git a/target/linux/rdc/patches/004-rdc3211_leds.patch b/target/linux/rdc/patches/004-rdc3211_leds.patch
new file mode 100644
index 000000000..2e704aa60
--- /dev/null
+++ b/target/linux/rdc/patches/004-rdc3211_leds.patch
@@ -0,0 +1,27 @@
+diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kconfig
+--- linux-2.6.19.2/drivers/leds/Kconfig	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/drivers/leds/Kconfig	2007-04-16 22:09:40.000000000 +0200
+@@ -76,6 +76,12 @@
+ 	  This option enables support for the Soekris net4801 and net4826 error
+ 	  LED.
+ 
++config LEDS_RDC3211
++	tristate "LED Support for RDC3211 boards"
++	depends on LEDS_CLASS && X86_RDC
++	help
++	  This option enables support for the RDC3211 various LEDs.
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile
+--- linux-2.6.21.1/drivers/leds/Makefile	2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1.new/drivers/leds/Makefile	2007-05-25 12:19:13.000000000 +0200
+@@ -16,6 +16,7 @@
+ obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
+ obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
+ obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
++obj-$(CONFIG_LEDS_RDC3211)		+= leds-rdc3211.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/target/linux/rdc/patches/005-rdc_x86_cpu_type.patch b/target/linux/rdc/patches/005-rdc_x86_cpu_type.patch
new file mode 100644
index 000000000..185ec13f7
--- /dev/null
+++ b/target/linux/rdc/patches/005-rdc_x86_cpu_type.patch
@@ -0,0 +1,22 @@
+diff -urN linux-2.6.22.1/arch/i386/kernel/cpu/Makefile linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile
+--- linux-2.6.22.1/arch/i386/kernel/cpu/Makefile	2007-08-11 22:16:24.000000000 +0200
++++ linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile	2007-08-13 16:37:32.000000000 +0200
+@@ -12,6 +12,7 @@
+ obj-y	+=	rise.o
+ obj-y	+=	nexgen.o
+ obj-y	+=	umc.o
++obj-$(CONFIG_X86_RDC)	+=	rdc.o
+ 
+ obj-$(CONFIG_X86_MCE)	+=	mcheck/
+ 
+diff -urN linux-2.6.22.1/arch/i386/kernel/cpu/Makefile linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile
+--- linux-2.6.22.1/include/asm-i386/processor.h	2007-08-13 16:42:25.000000000 +0200
++++ linux-2.6.22.1.new/include/asm-i386/processor.h	2007-08-13 16:51:19.000000000 +0200
+@@ -92,6 +92,7 @@
+ #define X86_VENDOR_TRANSMETA 7
+ #define X86_VENDOR_NSC 8
+ #define X86_VENDOR_NUM 9
++#define X86_VENDOR_RDC 10
+ #define X86_VENDOR_UNKNOWN 0xff
+ 
+ /*
diff --git a/target/linux/rdc/patches/600-x86_lzma.patch b/target/linux/rdc/patches/600-x86_lzma.patch
new file mode 100644
index 000000000..bb10f1fdc
--- /dev/null
+++ b/target/linux/rdc/patches/600-x86_lzma.patch
@@ -0,0 +1,1042 @@
+diff -Naur linux-old/arch/i386/boot/compressed/LzmaDecode.c linux-lzma/arch/i386/boot/compressed/LzmaDecode.c
+--- linux-old/arch/i386/boot/compressed/LzmaDecode.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-lzma/arch/i386/boot/compressed/LzmaDecode.c	2005-06-05 00:07:38.000000000 -0400
+@@ -0,0 +1,586 @@
++/*
++  LzmaDecode.c
++  LZMA Decoder (optimized for Speed version)
++  
++  LZMA SDK 4.17 Copyright (c) 1999-2005 Igor Pavlov (2005-04-05)
++  http://www.7-zip.org/
++
++  LZMA SDK is licensed under two licenses:
++  1) GNU Lesser General Public License (GNU LGPL)
++  2) Common Public License (CPL)
++  It means that you can select one of these two licenses and 
++  follow rules of that license.
++
++  SPECIAL EXCEPTION:
++  Igor Pavlov, as the author of this Code, expressly permits you to 
++  statically or dynamically link your Code (or bind by name) to the 
++  interfaces of this file without subjecting your linked Code to the 
++  terms of the CPL or GNU LGPL. Any modifications or additions 
++  to this file, however, are subject to the LGPL or CPL terms.
++*/
++
++#include "LzmaDecode.h"
++
++#ifndef Byte
++#define Byte unsigned char
++#endif
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++
++#define RC_READ_BYTE (*Buffer++)
++
++#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
++  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
++
++#ifdef _LZMA_IN_CB
++
++#define RC_TEST { if (Buffer == BufferLim) \
++  { UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
++  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
++
++#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
++
++#else
++
++#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
++
++#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
++ 
++#endif
++
++#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
++
++#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
++#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
++#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
++
++#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
++  { UpdateBit0(p); mi <<= 1; A0; } else \
++  { UpdateBit1(p); mi = (mi + mi) + 1; A1; } 
++  
++#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)               
++
++#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
++  { int i = numLevels; res = 1; \
++  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
++  res -= (1 << numLevels); }
++
++
++#define kNumPosBitsMax 4
++#define kNumPosStatesMax (1 << kNumPosBitsMax)
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define LenChoice 0
++#define LenChoice2 (LenChoice + 1)
++#define LenLow (LenChoice2 + 1)
++#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
++#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
++#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
++
++
++#define kNumStates 12
++#define kNumLitStates 7
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#define kNumPosSlotBits 6
++#define kNumLenToPosStates 4
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++
++#define kMatchMinLen 2
++
++#define IsMatch 0
++#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
++#define IsRepG0 (IsRep + kNumStates)
++#define IsRepG1 (IsRepG0 + kNumStates)
++#define IsRepG2 (IsRepG1 + kNumStates)
++#define IsRep0Long (IsRepG2 + kNumStates)
++#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
++#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
++#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
++#define LenCoder (Align + kAlignTableSize)
++#define RepLenCoder (LenCoder + kNumLenProbs)
++#define Literal (RepLenCoder + kNumLenProbs)
++
++#if Literal != LZMA_BASE_SIZE
++StopCompilingDueBUG
++#endif
++
++#ifdef _LZMA_OUT_READ
++
++typedef struct _LzmaVarState
++{
++  Byte *Buffer;
++  Byte *BufferLim;
++  UInt32 Range;
++  UInt32 Code;
++  #ifdef _LZMA_IN_CB
++  ILzmaInCallback *InCallback;
++  #endif
++  Byte *Dictionary;
++  UInt32 DictionarySize;
++  UInt32 DictionaryPos;
++  UInt32 GlobalPos;
++  UInt32 Reps[4];
++  int lc;
++  int lp;
++  int pb;
++  int State;
++  int RemainLen;
++  Byte TempDictionary[4];
++} LzmaVarState;
++
++int LzmaDecoderInit(
++    unsigned char *buffer, UInt32 bufferSize,
++    int lc, int lp, int pb,
++    unsigned char *dictionary, UInt32 dictionarySize,
++    #ifdef _LZMA_IN_CB
++    ILzmaInCallback *InCallback
++    #else
++    unsigned char *inStream, UInt32 inSize
++    #endif
++    )
++{
++  Byte *Buffer;
++  Byte *BufferLim;
++  UInt32 Range;
++  UInt32 Code;
++  LzmaVarState *vs = (LzmaVarState *)buffer;
++  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
++  UInt32 i;
++  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
++    return LZMA_RESULT_NOT_ENOUGH_MEM;
++  vs->Dictionary = dictionary;
++  vs->DictionarySize = dictionarySize;
++  vs->DictionaryPos = 0;
++  vs->GlobalPos = 0;
++  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
++  vs->lc = lc;
++  vs->lp = lp;
++  vs->pb = pb;
++  vs->State = 0;
++  vs->RemainLen = 0;
++  dictionary[dictionarySize - 1] = 0;
++  for (i = 0; i < numProbs; i++)
++    p[i] = kBitModelTotal >> 1; 
++
++  #ifdef _LZMA_IN_CB
++  RC_INIT;
++  #else
++  RC_INIT(inStream, inSize);
++  #endif
++  vs->Buffer = Buffer;
++  vs->BufferLim = BufferLim;
++  vs->Range = Range;
++  vs->Code = Code;
++  #ifdef _LZMA_IN_CB
++  vs->InCallback = InCallback;
++  #endif
++
++  return LZMA_RESULT_OK;
++}
++
++int LzmaDecode(unsigned char *buffer, 
++    unsigned char *outStream, UInt32 outSize,
++    UInt32 *outSizeProcessed)
++{
++  LzmaVarState *vs = (LzmaVarState *)buffer;
++  Byte *Buffer = vs->Buffer;
++  Byte *BufferLim = vs->BufferLim;
++  UInt32 Range = vs->Range;
++  UInt32 Code = vs->Code;
++  #ifdef _LZMA_IN_CB
++  ILzmaInCallback *InCallback = vs->InCallback;
++  #endif
++  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
++  int state = vs->State;
++  Byte previousByte;
++  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
++  UInt32 nowPos = 0;
++  UInt32 posStateMask = (1 << (vs->pb)) - 1;
++  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
++  int lc = vs->lc;
++  int len = vs->RemainLen;
++  UInt32 globalPos = vs->GlobalPos;
++
++  Byte *dictionary = vs->Dictionary;
++  UInt32 dictionarySize = vs->DictionarySize;
++  UInt32 dictionaryPos = vs->DictionaryPos;
++
++  Byte tempDictionary[4];
++  if (dictionarySize == 0)
++  {
++    dictionary = tempDictionary;
++    dictionarySize = 1;
++    tempDictionary[0] = vs->TempDictionary[0];
++  }
++
++  if (len == -1)
++  {
++    *outSizeProcessed = 0;
++    return LZMA_RESULT_OK;
++  }
++
++  while(len != 0 && nowPos < outSize)
++  {
++    UInt32 pos = dictionaryPos - rep0;
++    if (pos >= dictionarySize)
++      pos += dictionarySize;
++    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
++    if (++dictionaryPos == dictionarySize)
++      dictionaryPos = 0;
++    len--;
++  }
++  if (dictionaryPos == 0)
++    previousByte = dictionary[dictionarySize - 1];
++  else
++    previousByte = dictionary[dictionaryPos - 1];
++#else
++
++int LzmaDecode(
++    Byte *buffer, UInt32 bufferSize,
++    int lc, int lp, int pb,
++    #ifdef _LZMA_IN_CB
++    ILzmaInCallback *InCallback,
++    #else
++    unsigned char *inStream, UInt32 inSize,
++    #endif
++    unsigned char *outStream, UInt32 outSize,
++    UInt32 *outSizeProcessed)
++{
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
++  CProb *p = (CProb *)buffer;
++
++  UInt32 i;
++  int state = 0;
++  Byte previousByte = 0;
++  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
++  UInt32 nowPos = 0;
++  UInt32 posStateMask = (1 << pb) - 1;
++  UInt32 literalPosMask = (1 << lp) - 1;
++  int len = 0;
++  
++  Byte *Buffer;
++  Byte *BufferLim;
++  UInt32 Range;
++  UInt32 Code;
++  
++  if (bufferSize < numProbs * sizeof(CProb))
++    return LZMA_RESULT_NOT_ENOUGH_MEM;
++  for (i = 0; i < numProbs; i++)
++    p[i] = kBitModelTotal >> 1;
++  
++
++  #ifdef _LZMA_IN_CB
++  RC_INIT;
++  #else
++  RC_INIT(inStream, inSize);
++  #endif
++#endif
++
++  *outSizeProcessed = 0;
++  while(nowPos < outSize)
++  {
++    CProb *prob;
++    UInt32 bound;
++    int posState = (int)(
++        (nowPos 
++        #ifdef _LZMA_OUT_READ
++        + globalPos
++        #endif
++        )
++        & posStateMask);
++
++    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
++    IfBit0(prob)
++    {
++      int symbol = 1;
++      UpdateBit0(prob)
++      prob = p + Literal + (LZMA_LIT_SIZE * 
++        (((
++        (nowPos 
++        #ifdef _LZMA_OUT_READ
++        + globalPos
++        #endif
++        )
++        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
++
++      if (state >= kNumLitStates)
++      {
++        int matchByte;
++        #ifdef _LZMA_OUT_READ
++        UInt32 pos = dictionaryPos - rep0;
++        if (pos >= dictionarySize)
++          pos += dictionarySize;
++        matchByte = dictionary[pos];
++        #else
++        matchByte = outStream[nowPos - rep0];
++        #endif
++        do
++        {
++          int bit;
++          CProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & 0x100);
++          probLit = prob + 0x100 + bit + symbol;
++          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
++        }
++        while (symbol < 0x100);
++      }
++      while (symbol < 0x100)
++      {
++        CProb *probLit = prob + symbol;
++        RC_GET_BIT(probLit, symbol)
++      }
++      previousByte = (Byte)symbol;
++
++      outStream[nowPos++] = previousByte;
++      #ifdef _LZMA_OUT_READ
++      dictionary[dictionaryPos] = previousByte;
++      if (++dictionaryPos == dictionarySize)
++        dictionaryPos = 0;
++      #endif
++      if (state < 4) state = 0;
++      else if (state < 10) state -= 3;
++      else state -= 6;
++    }
++    else             
++    {
++      UpdateBit1(prob);
++      prob = p + IsRep + state;
++      IfBit0(prob)
++      {
++        UpdateBit0(prob);
++        rep3 = rep2;
++        rep2 = rep1;
++        rep1 = rep0;
++        state = state < kNumLitStates ? 0 : 3;
++        prob = p + LenCoder;
++      }
++      else
++      {
++        UpdateBit1(prob);
++        prob = p + IsRepG0 + state;
++        IfBit0(prob)
++        {
++          UpdateBit0(prob);
++          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IfBit0(prob)
++          {
++            #ifdef _LZMA_OUT_READ
++            UInt32 pos;
++            #endif
++            UpdateBit0(prob);
++            if (nowPos 
++                #ifdef _LZMA_OUT_READ
++                + globalPos
++                #endif
++                == 0)
++              return LZMA_RESULT_DATA_ERROR;
++            state = state < kNumLitStates ? 9 : 11;
++            #ifdef _LZMA_OUT_READ
++            pos = dictionaryPos - rep0;
++            if (pos >= dictionarySize)
++              pos += dictionarySize;
++            previousByte = dictionary[pos];
++            dictionary[dictionaryPos] = previousByte;
++            if (++dictionaryPos == dictionarySize)
++              dictionaryPos = 0;
++            #else
++            previousByte = outStream[nowPos - rep0];
++            #endif
++            outStream[nowPos++] = previousByte;
++            continue;
++          }
++          else
++          {
++            UpdateBit1(prob);
++          }
++        }
++        else
++        {
++          UInt32 distance;
++          UpdateBit1(prob);
++          prob = p + IsRepG1 + state;
++          IfBit0(prob)
++          {
++            UpdateBit0(prob);
++            distance = rep1;
++          }
++          else 
++          {
++            UpdateBit1(prob);
++            prob = p + IsRepG2 + state;
++            IfBit0(prob)
++            {
++              UpdateBit0(prob);
++              distance = rep2;
++            }
++            else
++            {
++              UpdateBit1(prob);
++              distance = rep3;
++              rep3 = rep2;
++            }
++            rep2 = rep1;
++          }
++          rep1 = rep0;
++          rep0 = distance;
++        }
++        state = state < kNumLitStates ? 8 : 11;
++        prob = p + RepLenCoder;
++      }
++      {
++        int numBits, offset;
++        CProb *probLen = prob + LenChoice;
++        IfBit0(probLen)
++        {
++          UpdateBit0(probLen);
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          numBits = kLenNumLowBits;
++        }
++        else
++        {
++          UpdateBit1(probLen);
++          probLen = prob + LenChoice2;
++          IfBit0(probLen)
++          {
++            UpdateBit0(probLen);
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            numBits = kLenNumMidBits;
++          }
++          else
++          {
++            UpdateBit1(probLen);
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            numBits = kLenNumHighBits;
++          }
++        }
++        RangeDecoderBitTreeDecode(probLen, numBits, len);
++        len += offset;
++      }
++
++      if (state < 4)
++      {
++        int posSlot;
++        state += kNumLitStates;
++        prob = p + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
++            kNumPosSlotBits);
++        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
++        if (posSlot >= kStartPosModelIndex)
++        {
++          int numDirectBits = ((posSlot >> 1) - 1);
++          rep0 = (2 | ((UInt32)posSlot & 1));
++          if (posSlot < kEndPosModelIndex)
++          {
++            rep0 <<= numDirectBits;
++            prob = p + SpecPos + rep0 - posSlot - 1;
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              RC_NORMALIZE
++              Range >>= 1;
++              rep0 <<= 1;
++              if (Code >= Range)
++              {
++                Code -= Range;
++                rep0 |= 1;
++              }
++            }
++            while (--numDirectBits != 0);
++            prob = p + Align;
++            rep0 <<= kNumAlignBits;
++            numDirectBits = kNumAlignBits;
++          }
++          {
++            int i = 1;
++            int mi = 1;
++            do
++            {
++              CProb *prob3 = prob + mi;
++              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
++              i <<= 1;
++            }
++            while(--numDirectBits != 0);
++          }
++        }
++        else
++          rep0 = posSlot;
++        if (++rep0 == (UInt32)(0))
++        {
++          /* it's for stream version */
++          len = -1;
++          break;
++        }
++      }
++
++      len += kMatchMinLen;
++      if (rep0 > nowPos 
++        #ifdef _LZMA_OUT_READ
++        + globalPos || rep0 > dictionarySize
++        #endif
++        ) 
++        return LZMA_RESULT_DATA_ERROR;
++      do
++      {
++        #ifdef _LZMA_OUT_READ
++        UInt32 pos = dictionaryPos - rep0;
++        if (pos >= dictionarySize)
++          pos += dictionarySize;
++        previousByte = dictionary[pos];
++        dictionary[dictionaryPos] = previousByte;
++        if (++dictionaryPos == dictionarySize)
++          dictionaryPos = 0;
++        #else
++        previousByte = outStream[nowPos - rep0];
++        #endif
++        len--;
++        outStream[nowPos++] = previousByte;
++      }
++      while(len != 0 && nowPos < outSize);
++    }
++  }
++  RC_NORMALIZE;
++
++  #ifdef _LZMA_OUT_READ
++  vs->Buffer = Buffer;
++  vs->BufferLim = BufferLim;
++  vs->Range = Range;
++  vs->Code = Code;
++  vs->DictionaryPos = dictionaryPos;
++  vs->GlobalPos = globalPos + nowPos;
++  vs->Reps[0] = rep0;
++  vs->Reps[1] = rep1;
++  vs->Reps[2] = rep2;
++  vs->Reps[3] = rep3;
++  vs->State = state;
++  vs->RemainLen = len;
++  vs->TempDictionary[0] = tempDictionary[0];
++  #endif
++
++  *outSizeProcessed = nowPos;
++  return LZMA_RESULT_OK;
++}
+diff -Naur linux-old/arch/i386/boot/compressed/LzmaDecode.h linux-lzma/arch/i386/boot/compressed/LzmaDecode.h
+--- linux-old/arch/i386/boot/compressed/LzmaDecode.h	1969-12-31 19:00:00.000000000 -0500
++++ linux-lzma/arch/i386/boot/compressed/LzmaDecode.h	2005-06-05 00:07:39.000000000 -0400
+@@ -0,0 +1,100 @@
++/* 
++  LzmaDecode.h
++  LZMA Decoder interface
++
++  LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18)
++  http://www.7-zip.org/
++
++  LZMA SDK is licensed under two licenses:
++  1) GNU Lesser General Public License (GNU LGPL)
++  2) Common Public License (CPL)
++  It means that you can select one of these two licenses and 
++  follow rules of that license.
++
++  SPECIAL EXCEPTION:
++  Igor Pavlov, as the author of this code, expressly permits you to 
++  statically or dynamically link your code (or bind by name) to the 
++  interfaces of this file without subjecting your linked code to the 
++  terms of the CPL or GNU LGPL. Any modifications or additions 
++  to this file, however, are subject to the LGPL or CPL terms.
++*/
++
++#ifndef __LZMADECODE_H
++#define __LZMADECODE_H
++
++/* #define _LZMA_IN_CB */
++/* Use callback for input data */
++
++/* #define _LZMA_OUT_READ */
++/* Use read function for output data */
++
++/* #define _LZMA_PROB32 */
++/* It can increase speed on some 32-bit CPUs, 
++   but memory usage will be doubled in that case */
++
++/* #define _LZMA_LOC_OPT */
++/* Enable local speed optimizations inside code */
++
++#ifndef UInt32
++#ifdef _LZMA_UINT32_IS_ULONG
++#define UInt32 unsigned long
++#else
++#define UInt32 unsigned int
++#endif
++#endif
++
++#ifdef _LZMA_PROB32
++#define CProb UInt32
++#else
++#define CProb unsigned short
++#endif
++
++#define LZMA_RESULT_OK 0
++#define LZMA_RESULT_DATA_ERROR 1
++#define LZMA_RESULT_NOT_ENOUGH_MEM 2
++
++#ifdef _LZMA_IN_CB
++typedef struct _ILzmaInCallback
++{
++  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
++} ILzmaInCallback;
++#endif
++
++#define LZMA_BASE_SIZE 1846
++#define LZMA_LIT_SIZE 768
++
++/* 
++bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
++bufferSize += 100 in case of _LZMA_OUT_READ
++by default CProb is unsigned short, 
++but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
++*/
++
++#ifdef _LZMA_OUT_READ
++int LzmaDecoderInit(
++    unsigned char *buffer, UInt32 bufferSize,
++    int lc, int lp, int pb,
++    unsigned char *dictionary, UInt32 dictionarySize,
++  #ifdef _LZMA_IN_CB
++    ILzmaInCallback *inCallback
++  #else
++    unsigned char *inStream, UInt32 inSize
++  #endif
++);
++#endif
++
++int LzmaDecode(
++    unsigned char *buffer, 
++  #ifndef _LZMA_OUT_READ
++    UInt32 bufferSize,
++    int lc, int lp, int pb,
++  #ifdef _LZMA_IN_CB
++    ILzmaInCallback *inCallback,
++  #else
++    unsigned char *inStream, UInt32 inSize,
++  #endif
++  #endif
++    unsigned char *outStream, UInt32 outSize,
++    UInt32 *outSizeProcessed);
++
++#endif
+diff -Naur linux-old/arch/i386/boot/compressed/lzma_misc.c linux-lzma/arch/i386/boot/compressed/lzma_misc.c
+--- linux-old/arch/i386/boot/compressed/lzma_misc.c	1969-12-31 19:00:00.000000000 -0500
++++ linux-lzma/arch/i386/boot/compressed/lzma_misc.c	2005-06-04 21:33:48.000000000 -0400
+@@ -0,0 +1,281 @@
++/*
++ * lzma_misc.c
++ * 
++ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
++ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
++ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
++ * 
++ * Decompress LZMA compressed vmlinuz 
++ * Version 0.9 Copyright (c) Ming-Ching Tiew mctiew@yahoo.com
++ * Program adapted from misc.c for 2.6 kernel
++ * Forward ported to latest 2.6 version of misc.c by
++ * Felix Fietkau <nbd@openwrt.org>
++ */
++
++#undef CONFIG_PARAVIRT
++#include <linux/linkage.h>
++#include <linux/vmalloc.h>
++#include <linux/screen_info.h>
++#include <asm/io.h>
++#include <asm/page.h>
++#include <asm/boot.h>
++
++/* WARNING!!
++ * This code is compiled with -fPIC and it is relocated dynamically
++ * at run time, but no relocation processing is performed.
++ * This means that it is not safe to place pointers in static structures.
++ */
++
++/*
++ * Getting to provable safe in place decompression is hard.
++ * Worst case behaviours need to be analized.
++ * Background information:
++ *
++ * The file layout is:
++ *    magic[2]
++ *    method[1]
++ *    flags[1]
++ *    timestamp[4]
++ *    extraflags[1]
++ *    os[1]
++ *    compressed data blocks[N]
++ *    crc[4] orig_len[4]
++ *
++ * resulting in 18 bytes of non compressed data overhead.
++ *
++ * Files divided into blocks
++ * 1 bit (last block flag)
++ * 2 bits (block type)
++ *
++ * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
++ * The smallest block type encoding is always used.
++ *
++ * stored:
++ *    32 bits length in bytes.
++ *
++ * fixed:
++ *    magic fixed tree.
++ *    symbols.
++ *
++ * dynamic:
++ *    dynamic tree encoding.
++ *    symbols.
++ *
++ *
++ * The buffer for decompression in place is the length of the
++ * uncompressed data, plus a small amount extra to keep the algorithm safe.
++ * The compressed data is placed at the end of the buffer.  The output
++ * pointer is placed at the start of the buffer and the input pointer
++ * is placed where the compressed data starts.  Problems will occur
++ * when the output pointer overruns the input pointer.
++ *
++ * The output pointer can only overrun the input pointer if the input
++ * pointer is moving faster than the output pointer.  A condition only
++ * triggered by data whose compressed form is larger than the uncompressed
++ * form.
++ *
++ * The worst case at the block level is a growth of the compressed data
++ * of 5 bytes per 32767 bytes.
++ *
++ * The worst case internal to a compressed block is very hard to figure.
++ * The worst case can at least be boundined by having one bit that represents
++ * 32764 bytes and then all of the rest of the bytes representing the very
++ * very last byte.
++ *
++ * All of which is enough to compute an amount of extra data that is required
++ * to be safe.  To avoid problems at the block level allocating 5 extra bytes
++ * per 32767 bytes of data is sufficient.  To avoind problems internal to a block
++ * adding an extra 32767 bytes (the worst case uncompressed block size) is
++ * sufficient, to ensure that in the worst case the decompressed data for
++ * block will stop the byte before the compressed data for a block begins.
++ * To avoid problems with the compressed data's meta information an extra 18
++ * bytes are needed.  Leading to the formula:
++ *
++ * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
++ *
++ * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
++ * Adding 32768 instead of 32767 just makes for round numbers.
++ * Adding the decompressor_size is necessary as it musht live after all
++ * of the data as well.  Last I measured the decompressor is about 14K.
++ * 10K of actuall data and 4K of bss.
++ *
++ */
++
++/*
++ * gzip declarations
++ */
++
++#define OF(args)  args
++#define STATIC static
++
++#undef memcpy
++
++typedef unsigned char  uch;
++typedef unsigned short ush;
++typedef unsigned long  ulg;
++
++#define WSIZE 0x80000000	/* Window size must be at least 32k,
++				 * and a power of two
++				 * We don't actually have a window just
++				 * a huge output buffer so I report
++				 * a 2G windows size, as that should
++				 * always be larger than our output buffer.
++				 */
++
++static uch *inbuf;	/* input buffer */
++static uch *window;	/* Sliding window buffer, (and final output buffer) */
++
++static unsigned insize;  /* valid bytes in inbuf */
++static unsigned inptr;   /* index of next byte to be processed in inbuf */
++static unsigned long workspace;
++
++#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
++		
++/* Diagnostic functions */
++#ifdef DEBUG
++#  define Assert(cond,msg) {if(!(cond)) error(msg);}
++#  define Trace(x) fprintf x
++#  define Tracev(x) {if (verbose) fprintf x ;}
++#  define Tracevv(x) {if (verbose>1) fprintf x ;}
++#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
++#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
++#else
++#  define Assert(cond,msg)
++#  define Trace(x)
++#  define Tracev(x)
++#  define Tracevv(x)
++#  define Tracec(c,x)
++#  define Tracecv(c,x)
++#endif
++
++static int  fill_inbuf(void);
++  
++/*
++ * This is set up by the setup-routine at boot-time
++ */
++static unsigned char *real_mode; /* Pointer to real-mode data */
++extern unsigned char input_data[];
++extern int input_len;
++
++static void error(char *x);
++static void *memcpy(void *dest, const void *src, unsigned n);
++
++#ifdef CONFIG_X86_NUMAQ
++void *xquad_portio;
++#endif
++
++static void* memcpy(void* dest, const void* src, unsigned n)
++{
++	int i;
++	char *d = (char *)dest, *s = (char *)src;
++
++	for (i=0;i<n;i++) d[i] = s[i];
++	return dest;
++}
++
++/* ===========================================================================
++ * Fill the input buffer. This is called only when the buffer is empty
++ * and at least one byte is really needed.
++ */
++static int fill_inbuf(void)
++{
++	error("ran out of input data");
++	return 0;
++}
++
++
++// When using LZMA in callback, the compressed length is not needed.
++// Otherwise you need a special version of lzma compression program
++// which will pad the compressed length in the header.
++#define _LZMA_IN_CB
++#include "LzmaDecode.h"
++#include "LzmaDecode.c"
++
++static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize);
++
++
++/*
++ * Do the lzma decompression
++ * When using LZMA in callback, the end of input stream is automatically determined
++ */
++static int lzma_unzip(void)
++{
++
++	unsigned int i;  /* temp value */
++	unsigned int lc; /* literal context bits */
++	unsigned int lp; /* literal pos state bits */
++	unsigned int pb; /* pos state bits */
++	unsigned int uncompressedSize = 0;
++	unsigned char* p;
++	
++	ILzmaInCallback callback;
++	callback.Read = read_byte;
++
++	/* lzma args */
++	i = get_byte();
++	lc = i % 9, i = i / 9;
++	lp = i % 5, pb = i / 5;
++	
++	/* skip dictionary size */
++	for (i = 0; i < 4; i++) 
++		get_byte();
++	// get uncompressedSize 	
++	p= (char*)&uncompressedSize;	
++	for (i = 0; i < 4; i++) 
++	    *p++ = get_byte();
++	    
++	//get compressedSize 
++	for (i = 0; i < 4; i++) 
++		get_byte();
++	
++	// point it beyond uncompresedSize
++	//workspace = window + uncompressedSize;
++	
++	/* decompress kernel */
++	if (LzmaDecode((unsigned char*)workspace, ~0, lc, lp, pb, &callback,
++		(unsigned char*)window, uncompressedSize, &i) == LZMA_RESULT_OK)
++		return 0;
++	else
++		return 1;
++}
++
++
++#ifdef  _LZMA_IN_CB
++static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
++{
++	static unsigned int i = 0;
++	static unsigned char val;
++	*bufferSize = 1;
++	val = get_byte();
++	*buffer = &val;
++	return LZMA_RESULT_OK;
++}	
++#endif
++
++static void error(char *x)
++{
++	while(1);	/* Halt */
++}
++
++asmlinkage void decompress_kernel(void *rmode, unsigned long end,
++			uch *input_data, unsigned long input_len, uch *output)
++{
++	real_mode = rmode;
++
++	window = output;
++	inbuf  = input_data;	/* Input buffer */
++	insize = input_len;
++	inptr  = 0;
++
++	if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1))
++		error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
++	if ((workspace = end) > ((-__PAGE_OFFSET-(512 <<20)-1) & 0x7fffffff))
++		error("Destination address too large");
++#ifndef CONFIG_RELOCATABLE
++	if ((u32)output != LOAD_PHYSICAL_ADDR)
++		error("Wrong destination address");
++#endif
++
++	lzma_unzip();
++	return;
++}
+diff -Naur linux-old/arch/i386/boot/compressed/Makefile linux-lzma/arch/i386/boot/compressed/Makefile
+--- linux-old/arch/i386/boot/compressed/Makefile	2005-06-04 21:53:40.000000000 -0400
++++ linux-lzma/arch/i386/boot/compressed/Makefile	2005-06-05 00:25:23.000000000 -0400
+@@ -4,7 +4,7 @@
+ # create a compressed vmlinux image from the original vmlinux
+ #
+ 
+-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o \
++targets		:= vmlinux vmlinux.bin vmlinux.bin.lzma head.o lzma_misc.o piggy.o \
+ 			vmlinux.bin.all vmlinux.relocs
+ EXTRA_AFLAGS	:= -traditional
+ 
+@@ -17,7 +17,7 @@
+ 	   $(call cc-option,-fno-stack-protector)
+ LDFLAGS := -m elf_i386
+ 
+-$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
++$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/lzma_misc.o $(obj)/piggy.o FORCE
+ 	$(call if_changed,ld)
+ 	@:
+ 
+@@ -37,14 +37,14 @@
+ 	$(call if_changed,relocbin)
+ 
+ ifdef CONFIG_RELOCATABLE
+-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
+-	$(call if_changed,gzip)
++$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
++	$(call if_changed,lzma)
+ else
+-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+-	$(call if_changed,gzip)
++$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
++	$(call if_changed,lzma)
+ endif
+ 
+ LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
+ 
+-$(obj)/piggy.o: $(src)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
++$(obj)/piggy.o: $(src)/vmlinux.scr $(obj)/vmlinux.bin.lzma FORCE
+ 	$(call if_changed,ld)
+diff -urN linux-2.6.19.2/scripts/Makefile.lib linux-2.6.19.2.new/scripts/Makefile.lib
+--- linux-2.6.19.2/scripts/Makefile.lib	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/scripts/Makefile.lib	2007-04-15 23:51:54.000000000 +0200
+@@ -162,4 +162,9 @@
+ quiet_cmd_gzip = GZIP    $@
+ cmd_gzip = gzip -f -9 < $< > $@
+ 
+-
++# LZMA
++#
++quiet_cmd_lzma = LZMA $@
++cmd_lzma = bash -e scripts/lzma_kern $< $@ -lc7 -lp0 -pb0
++# to use lzmacomp,
++# cmd_lzma = lzmacomp $< 700 > $@
+diff -u linux/scripts/lzma_kern linux/scripts/lzma_kern
+--- linux/scripts/lzma_kern	2007-07-27 20:18:17.013014750 -0700
++++ linux/scripts/lzma_kern	2007-07-27 20:18:17.013014750 -0700
+@@ -0,0 +1,4 @@
++get-size() { echo "$5" ;}
++printf -v len '%.8x' "$(get-size $(ls -l "$1"))"
++lzma e "$@"
++echo -ne "\x$(echo $len | cut -c 7,8)\x$(echo $len | cut -c 5,6)\x$(echo $len | cut -c 3,4)\x$(echo $len | cut -c 1,2)" >> "$2"
diff --git a/target/linux/rdc/profiles/AR525W.mk b/target/linux/rdc/profiles/AR525W.mk
new file mode 100644
index 000000000..5c01554d4
--- /dev/null
+++ b/target/linux/rdc/profiles/AR525W.mk
@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/ar525w
+  NAME:=AirLink101 AR525W
+  PACKAGES:=kmod-rt61-pci kmod-r6040
+endef
+$(eval $(call Profile,ar525w))
+
diff --git a/target/linux/rdc/profiles/WL-153.mk b/target/linux/rdc/profiles/WL-153.mk
new file mode 100644
index 000000000..f030455b2
--- /dev/null
+++ b/target/linux/rdc/profiles/WL-153.mk
@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/wl153
+  NAME:=Sitecom WL-153
+  PACKAGES:=kmod-rt61-pci kmod-r6040
+endef
+$(eval $(call Profile,wl153))
+