[rdc] nuke old files

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15402 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 0 insertions, 199 deletions

diff --git a/target/linux/rdc/patches-2.6.25/001-rdc3210_flash_map.patch b/target/linux/rdc/patches-2.6.25/001-rdc3210_flash_map.patch
deleted file mode 100644
index 4c12471ec..000000000
--- a/target/linux/rdc/patches-2.6.25/001-rdc3210_flash_map.patch
+++ /dev/null
@@ -1,63 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -110,6 +110,50 @@
- 	  Sun Microsystems boardsets.  This driver will require CFI support
- 	  in the kernel, so if you did not enable CFI previously, do that now.
- 
-+config MTD_RDC3210
-+	tristate "CFI Flash device mapped on RDC3210"
-+	depends on X86 && MTD_CFI && MTD_PARTITIONS
-+	help
-+	  RDC-3210 is the flash device we find on Ralink reference board.
-+
-+config MTD_RDC3210_STATIC_MAP
-+	bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
-+	select MTD_RDC3210_FACTORY_PRESENT
-+	help
-+	  The mapping driver will use the static partition map for the
-+	  RDC-3210 flash device.
-+
-+config MTD_RDC3210_FACTORY_PRESENT
-+	bool "Reserve a partition on RDC3210 for factory presets"
-+	depends on MTD_RDC3210
-+	default y
-+	help
-+	  The mapping driver will reserve a partition on the RDC-3210 flash
-+	  device for resetting flash contents to factory defaults.
-+
-+config MTD_RDC3210_ALLOW_JFFS2
-+	bool "JFFS2 filesystem usable in a partition on RDC3210"
-+	depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
-+	help
-+	  The mapping driver will align a partition on the RDC-3210 flash
-+	  device to an erase-block boundary so that a JFFS2 filesystem may
-+	  reside on it.
-+
-+config MTD_RDC3210_SIZE
-+	hex "Amount of flash memory on RDC3210"
-+	depends on MTD_RDC3210
-+	default "0x400000"
-+	help
-+	  Total size in bytes of the RDC-3210 flash device
-+
-+config MTD_RDC3210_BUSWIDTH
-+	int "Width of CFI Flash device mapped on RDC3210"
-+	depends on MTD_RDC3210
-+	default "2"
-+	help
-+	  Number of bytes addressed on the RDC-3210 flash device before
-+	  addressing the same chip again
-+
- config MTD_SC520CDP
- 	tristate "CFI Flash device mapped on AMD SC520 CDP"
- 	depends on X86 && MTD_CFI && MTD_CONCAT
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -29,6 +29,7 @@
- obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
- obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
- obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
-+obj-$(CONFIG_MTD_RDC3210)	+= rdc3210.o
- obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
- obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
diff --git a/target/linux/rdc/patches-2.6.25/003-rootfstype.patch b/target/linux/rdc/patches-2.6.25/003-rootfstype.patch
deleted file mode 100644
index 55a4cd49f..000000000
--- a/target/linux/rdc/patches-2.6.25/003-rootfstype.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -163,6 +163,8 @@
- {
- 	char *s = page;
- 
-+	if (!root_fs_names)
-+		root_fs_names = "squashfs,jffs2";
- 	if (root_fs_names) {
- 		strcpy(page, root_fs_names);
- 		while (*s++) {
diff --git a/target/linux/rdc/patches-2.6.25/004-yenta_mystery.patch b/target/linux/rdc/patches-2.6.25/004-yenta_mystery.patch
deleted file mode 100644
index 7faabdf7a..000000000
--- a/target/linux/rdc/patches-2.6.25/004-yenta_mystery.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- linux-2.6.24.7.orig/drivers/pcmcia/yenta_socket.c	2008-10-26 08:30:07.000000000 -0700
-+++ linux-2.6.24.7/drivers/pcmcia/yenta_socket.c	2008-10-26 08:54:27.000000000 -0700
-@@ -1171,6 +1171,17 @@
- 
- 	/* We must finish initialization here */
- 
-+#ifdef CONFIG_X86_RDC
-+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
-+#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
-+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
-+
-+	config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
-+	config_writel(socket, 35*4, 0x00000022);
-+	config_writel(socket, 36*4, 0x60200000);
-+	config_writel(socket, 40*4, 0x7e020000);
-+#endif
-+
- 	if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
- 		/* No IRQ or request_irq failed. Poll */
- 		socket->cb_irq = 0; /* But zero is a valid IRQ number. */
diff --git a/target/linux/rdc/patches-2.6.25/005-fix_amit_breakage.patch b/target/linux/rdc/patches-2.6.25/005-fix_amit_breakage.patch
deleted file mode 100644
index eabfd04ed..000000000
--- a/target/linux/rdc/patches-2.6.25/005-fix_amit_breakage.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-diff -ru linux-2.6.24.7.orig/arch/x86/boot/boot.h linux-2.6.24.7/arch/x86/boot/boot.h
---- linux-2.6.24.7.orig/arch/x86/boot/boot.h	2008-10-26 20:18:14.000000000 -0700
-+++ linux-2.6.24.7/arch/x86/boot/boot.h	2008-10-26 20:18:36.000000000 -0700
-@@ -60,7 +60,7 @@
- {
- 	asm volatile("outl %0,%1" : : "a" (v), "dN" (port));
- }
--static inline u32 inl(u32 port)
-+static inline u32 inl(u16 port)
- {
- 	u32 v;
- 	asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
-diff -ru linux-2.6.24.7.orig/arch/x86/boot/pm.c linux-2.6.24.7/arch/x86/boot/pm.c
---- linux-2.6.24.7.orig/arch/x86/boot/pm.c	2008-10-26 19:55:50.000000000 -0700
-+++ linux-2.6.24.7/arch/x86/boot/pm.c	2008-10-26 21:38:12.000000000 -0700
-@@ -16,6 +16,9 @@
- 
- #include "boot.h"
- #include <asm/segment.h>
-+#ifdef CONFIG_X86_RDC
-+#include <asm/mach-rdc/rdc321x_defs.h>
-+#endif
- 
- /*
-  * Invoke the realmode switch hook if present; otherwise
-@@ -160,6 +163,16 @@
- 		die();
- 	}
- 
-+#ifdef CONFIG_X86_RDC
-+	{
-+		u32 bootctl;
-+
-+		outl(0x80003840, RDC3210_CFGREG_ADDR);
-+		bootctl = inl(RDC3210_CFGREG_DATA) | 0x07ff0000;
-+		outl(bootctl, RDC3210_CFGREG_DATA);
-+	}
-+#endif
-+
- 	/* Reset coprocessor (IGNNE#) */
- 	reset_coprocessor();
- 
diff --git a/target/linux/rdc/patches-2.6.25/600-x86_lzma.patch b/target/linux/rdc/patches-2.6.25/600-x86_lzma.patch
deleted file mode 100644
index 5e0c8d7fd..000000000
--- a/target/linux/rdc/patches-2.6.25/600-x86_lzma.patch
+++ /dev/null
@@ -1,63 +0,0 @@
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -172,4 +172,9 @@
- quiet_cmd_gzip = GZIP    $@
- cmd_gzip = gzip -f -9 < $< > $@
- 
--
-+# LZMA
-+#
-+quiet_cmd_lzma = LZMA $@
-+cmd_lzma = bash -e scripts/lzma_kern $< $@ -lc7 -lp0 -pb0
-+# to use lzmacomp,
-+# cmd_lzma = lzmacomp $< 700 > $@
---- /dev/null
-+++ b/scripts/lzma_kern
-@@ -0,0 +1,4 @@
-+get-size() { echo "$5" ;}
-+printf -v len '%.8x' "$(get-size $(ls -l "$1"))"
-+lzma e "$@"
-+echo -ne "\x$(echo $len | cut -c 7,8)\x$(echo $len | cut -c 5,6)\x$(echo $len | cut -c 3,4)\x$(echo $len | cut -c 1,2)" >> "$2"
---- a/arch/x86/boot/compressed/Makefile
-+++ b/arch/x86/boot/compressed/Makefile
-@@ -4,7 +4,7 @@
- # create a compressed vmlinux image from the original vmlinux
- #
- 
--targets := vmlinux vmlinux.bin vmlinux.bin.gz head_$(BITS).o misc.o piggy.o
-+targets := vmlinux vmlinux.bin vmlinux.bin.lzma head_$(BITS).o lzma_misc.o piggy.o
- 
- KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
- KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
-@@ -18,7 +18,7 @@
- LDFLAGS := -m elf_$(UTS_MACHINE)
- LDFLAGS_vmlinux := -T
- 
--$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
-+$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/lzma_misc.o $(obj)/piggy.o FORCE
- 	$(call if_changed,ld)
- 	@:
- 
-@@ -44,11 +44,11 @@
- 	$(call if_changed,relocbin)
- 
- ifdef CONFIG_RELOCATABLE
--$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
--	$(call if_changed,gzip)
-+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
-+	$(call if_changed,lzma)
- else
--$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
--	$(call if_changed,gzip)
-+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
-+	$(call if_changed,lzma)
- endif
- LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
- 
-@@ -60,5 +60,5 @@
- endif
- 
- 
--$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.lzma FORCE
- 	$(call if_changed,ld)