strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

27 files changed, 0 insertions, 3798 deletions

diff --git a/target/linux/rdc-2.6/Makefile b/target/linux/rdc-2.6/Makefile
deleted file mode 100644
index 5af5e85c6..000000000
--- a/target/linux/rdc-2.6/Makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=i386
-BOARD:=rdc
-BOARDNAME:=RDC321x x86
-FEATURES:=squashfs jffs2 broken
-
-LINUX_VERSION:=2.6.22.4
-
-define Target/Description
-        Build firmware images for RDC321x based routers
-        (e.g. Airlink101 AR525W, Linksys WRT54R, Sitecom WL-153)
-endef
-
-include $(INCLUDE_DIR)/kernel-build.mk
-
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-    define Kernel/SetInitramfs
-	echo "r6040 parent=wlan0" > $(TARGET_DIR)/etc/modules.d/99-r6040
-	$(RM) $(TARGET_DIR)/sbin/init
-	ln -s /etc/preinit $(TARGET_DIR)/sbin/init
-	sed -i 's,exec /sbin/init,exec /bin/busybox init,g' $(TARGET_DIR)/etc/preinit
-	sed -i 's,/sbin/init,/bin/busybox init,g' $(TARGET_DIR)/init
-	mv $(TARGET_DIR)/init $(TARGET_DIR)/linuxrc
-	sed -i 's,eth0,eth1,g' $(TARGET_DIR)/etc/config/network
-    endef
-endif
-
-# include the profiles
--include profiles/*.mk
-
-$(eval $(call BuildKernel))
diff --git a/target/linux/rdc-2.6/base-files/default/etc/diag.sh b/target/linux/rdc-2.6/base-files/default/etc/diag.sh
deleted file mode 100644
index 8d5c38262..000000000
--- a/target/linux/rdc-2.6/base-files/default/etc/diag.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2007 OpenWrt.org
-
-set_led() {
-	local led="$1"
-	local state="$2"
-	[ -d "/sys/class/leds/rdc321x:$led" ] && echo "$state" > "/sys/class/leds/rdc321x:$led/brightness"
-}
-
-set_state() {
-	case "$1" in
-		preinit)
-			set_led dmz 1
-		;;
-		done)
-			set_led dmz 0
-		;;
-	esac
-}
diff --git a/target/linux/rdc-2.6/config/default b/target/linux/rdc-2.6/config/default
deleted file mode 100644
index 381a961e9..000000000
--- a/target/linux/rdc-2.6/config/default
+++ /dev/null
@@ -1,313 +0,0 @@
-# CONFIG_60XX_WDT is not set
-# CONFIG_8139TOO is not set
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_AGP is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_PIIX=m
-# CONFIG_ATM_DRIVERS is not set
-CONFIG_BASE_SMALL=0
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDE=m
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-# CONFIG_COMPAT_VDSO is not set
-# CONFIG_CPU5_WDT is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_CRYPTO_AES_586=m
-CONFIG_CRYPTO_DEV_GEODE=m
-# CONFIG_CRYPTO_DEV_PADLOCK is not set
-CONFIG_CRYPTO_TWOFISH_586=m
-# CONFIG_CS5535_GPIO is not set
-# CONFIG_DCDBAS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_DELL_RBU is not set
-CONFIG_DEVPORT=y
-CONFIG_DMI=y
-CONFIG_DOUBLEFAULT=y
-# CONFIG_E100 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EDAC is not set
-# CONFIG_EDD is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HID=m
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_HPET_TIMER is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_AMD is not set
-# CONFIG_HW_RANDOM_GEODE is not set
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_VIA is not set
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_I2C=m
-# CONFIG_I2C_ALGOBIT is not set
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I8K is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_IBM_ASM is not set
-CONFIG_ICPLUS_PHY=y
-CONFIG_IDE=m
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_YEALINK=m
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_ISA is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_ITCO_WDT is not set
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_RUBIN=y
-CONFIG_JFS_FS=m
-CONFIG_KEXEC=y
-CONFIG_KTIME_SCALAR=y
-# CONFIG_KVM is not set
-CONFIG_LBD=y
-CONFIG_LEDS_RDC3211=y
-CONFIG_LSF=y
-# CONFIG_M386 is not set
-CONFIG_M486=y
-# CONFIG_M586 is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M686 is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_MCA is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_CONCAT=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_NETSC520 is not set
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_PNC2000 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_RDC3210=y
-CONFIG_MTD_RDC3210_ALLOW_JFFS2=y
-CONFIG_MTD_RDC3210_BUSWIDTH=2
-# CONFIG_MTD_RDC3210_FACTORY_PRESENT is not set
-CONFIG_MTD_RDC3210_SIZE=0x400000
-# CONFIG_MTD_RDC3210_STATIC_MAP is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SC520CDP is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_TS5500 is not set
-# CONFIG_MTRR is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NETDEV_1000 is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_VENDOR_3COM is not set
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NOHIGHMEM=y
-# CONFIG_NO_HZ is not set
-CONFIG_NR_QUICK=1
-# CONFIG_NSC_GPIO is not set
-CONFIG_NVRAM=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARAVIRT is not set
-CONFIG_PATA_ARTOP=m
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_PC87413_WDT is not set
-CONFIG_PCCARD=m
-CONFIG_PCCARD_NONSTATIC=m
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIPCWATCHDOG is not set
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_GOANY=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-CONFIG_PCMCIA=m
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_ALIGN=0x100000
-CONFIG_PHYSICAL_START=0x100000
-# CONFIG_PNPACPI is not set
-# CONFIG_QSEMI_PHY is not set
-CONFIG_QUICKLIST=y
-CONFIG_R6040=m
-# CONFIG_R6040_NAPI is not set
-# CONFIG_RELOCATABLE is not set
-# CONFIG_RTC is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SECCOMP is not set
-CONFIG_SEMAPHORE_SLEEPERS=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SMP is not set
-# CONFIG_SMSC37B787_WDT is not set
-# CONFIG_SMSC_PHY is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SONYPI is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_TELCLOCK is not set
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_TOSHIBA is not set
-CONFIG_UID16=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_V4L1=y
-# CONFIG_VM86 is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83697HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAFER_WDT is not set
-CONFIG_X86=y
-CONFIG_X86_32=y
-CONFIG_X86_ALIGNMENT_16=y
-# CONFIG_X86_BIGSMP is not set
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_CPUID=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_ES7000 is not set
-CONFIG_X86_F00F_BUG=y
-# CONFIG_X86_GENERIC is not set
-# CONFIG_X86_GENERICARCH is not set
-CONFIG_X86_INVLPG=y
-CONFIG_X86_L1_CACHE_SHIFT=4
-# CONFIG_X86_MCE is not set
-CONFIG_X86_MINIMUM_CPU_MODEL=4
-CONFIG_X86_MSR=y
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_PC is not set
-CONFIG_X86_POPAD_OK=y
-CONFIG_X86_PPRO_FENCE=y
-CONFIG_X86_RDC=y
-CONFIG_X86_REBOOTFIXUPS=y
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_VISWS is not set
-# CONFIG_X86_VOYAGER is not set
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_XADD=y
diff --git a/target/linux/rdc-2.6/config/profile-wl153 b/target/linux/rdc-2.6/config/profile-wl153
deleted file mode 100644
index 3ab59a881..000000000
--- a/target/linux/rdc-2.6/config/profile-wl153
+++ /dev/null
@@ -1,2 +0,0 @@
-# CONFIG_MTD_RDC3210_ALLOW_JFFS2 is not set
-CONFIG_MTD_RDC3210_SIZE=0x200000
diff --git a/target/linux/rdc-2.6/files/arch/i386/kernel/cpu/rdc.c b/target/linux/rdc-2.6/files/arch/i386/kernel/cpu/rdc.c
deleted file mode 100644
index f4b9083bf..000000000
--- a/target/linux/rdc-2.6/files/arch/i386/kernel/cpu/rdc.c
+++ /dev/null
@@ -1,24 +0,0 @@
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-#include "cpu.h"
-
-static struct cpu_dev rdc_cpu_dev __cpuinitdata = {
-        .c_vendor       = "RDC",
-        .c_models = {
-                { .vendor = X86_VENDOR_RDC, .family = 4, .model_names =
-                  {
-                          [0] = "R861x(-G)",
-                  }
-                },
-        },
-};
-
-int __init rdc_init_cpu(void)
-{
-        cpu_devs[X86_VENDOR_RDC] = &rdc_cpu_dev;
-        return 0;
-}
diff --git a/target/linux/rdc-2.6/files/arch/i386/mach-rdc/Makefile b/target/linux/rdc-2.6/files/arch/i386/mach-rdc/Makefile
deleted file mode 100644
index 5961bc791..000000000
--- a/target/linux/rdc-2.6/files/arch/i386/mach-rdc/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the RDC321x specific parts of the kernel
-#
-obj-$(CONFIG_X86_RDC)        := gpio.o platform.o wdt.o
-
diff --git a/target/linux/rdc-2.6/files/arch/i386/mach-rdc/gpio.c b/target/linux/rdc-2.6/files/arch/i386/mach-rdc/gpio.c
deleted file mode 100644
index dbd03270f..000000000
--- a/target/linux/rdc-2.6/files/arch/i386/mach-rdc/gpio.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- *  	RDC321x architecture specific GPIO support
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-
-#include <asm/mach-rdc/rdc321x_defs.h>
-
-static inline int rdc_gpio_is_valid(unsigned gpio)
-{
-	return (gpio <= RDC_MAX_GPIO);
-}
-
-static unsigned int rdc_gpio_read(unsigned gpio)
-{
-	unsigned int val;
-
-	val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
-        outl(val, RDC3210_CFGREG_ADDR);
-        udelay(10);
-        val = inl(RDC3210_CFGREG_DATA);
-        val |= (0x1 << (gpio & 0x1F));
-        outl(val, RDC3210_CFGREG_DATA);
-        udelay(10);
-        val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
-        outl(val, RDC3210_CFGREG_ADDR);
-        udelay(10);
-        val = inl(RDC3210_CFGREG_DATA);
-
-	return val;
-}
-
-static void rdc_gpio_write(unsigned int val)
-{
-	if (val) {
-		outl(val, RDC3210_CFGREG_DATA);
-		udelay(10);
-	}
-}
-
-int rdc_gpio_get_value(unsigned gpio)
-{
-	if (rdc_gpio_is_valid(gpio))
-		return (int)rdc_gpio_read(gpio);
-	else
-		return -EINVAL;
-}
-EXPORT_SYMBOL(rdc_gpio_get_value);
-
-void rdc_gpio_set_value(unsigned gpio, int value)
-{
-	unsigned int val;
-
-	if (!rdc_gpio_is_valid(gpio))
-		return;
-	
-	val = rdc_gpio_read(gpio);
-
-	if (value)
-		val &= ~(0x1 << (gpio & 0x1F));
-	else
-		val |= (0x1 << (gpio & 0x1F));
-
-	rdc_gpio_write(val);
-}
-EXPORT_SYMBOL(rdc_gpio_set_value);
-
-int rdc_gpio_direction_input(unsigned gpio)
-{
-	return 0;
-}
-EXPORT_SYMBOL(rdc_gpio_direction_input);
-
-int rdc_gpio_direction_output(unsigned gpio, int value)
-{
-	return 0;
-}
-EXPORT_SYMBOL(rdc_gpio_direction_output);
-
-
diff --git a/target/linux/rdc-2.6/files/arch/i386/mach-rdc/platform.c b/target/linux/rdc-2.6/files/arch/i386/mach-rdc/platform.c
deleted file mode 100644
index 6809dcdd3..000000000
--- a/target/linux/rdc-2.6/files/arch/i386/mach-rdc/platform.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  $Id: platform.c 8331 2007-08-03 15:59:23Z florian $
- *
- *  Generic RDC321x platform devices
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <asm/gpio.h>
-
-#define PFX "rdc321x: "
-
-/* FIXME : Flash */
-static struct resource rdc_flash_resource[] = {
-	[0] = {
-		.start = (u32)-CONFIG_MTD_RDC3210_SIZE,
-		.end = (u32)-1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device rdc_flash_device = {
-	.name = "rdc321x-flash",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(rdc_flash_resource),
-	.resource = rdc_flash_resource,
-};
-
-/* LEDS */
-static struct platform_device rdc321x_leds = {
-	.name = "rdc321x-leds",
-	.id = -1,
-	.num_resources = 0,
-};
-
-static struct platform_device rdc321x_wdt = {
-	.name = "rdc321x-wdt",
-	.id = -1,
-	.num_resources = 0,
-};
-
-static int __init rdc_board_setup(void)
-{
-	int err;
-
-	err = platform_device_register(&rdc_flash_device);
-	if (err)
-		printk(KERN_ALERT PFX "failed to register flash\n");
-
-	err = platform_device_register(&rdc321x_leds);
-	if (err)
-		printk(KERN_ALERT PFX "failed to register LEDS\n");
-
-	err = platform_device_register(&rdc321x_wdt);
-		printk(KERN_ALERT PFX "failed to register watchdog\n");
-
-	return err; 
-}
-
-arch_initcall(rdc_board_setup);
diff --git a/target/linux/rdc-2.6/files/arch/i386/mach-rdc/wdt.c b/target/linux/rdc-2.6/files/arch/i386/mach-rdc/wdt.c
deleted file mode 100644
index 39956f35a..000000000
--- a/target/linux/rdc-2.6/files/arch/i386/mach-rdc/wdt.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * RDC321x watchdog driver
- *
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- * This driver is highly inspired from the cpu5_wdt driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/timer.h>
-#include <linux/completion.h>
-#include <linux/jiffies.h>
-#include <linux/platform_device.h>
-#include <linux/watchdog.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <asm/mach-rdc/rdc321x_defs.h>
-
-#define RDC_WDT_MASK		0x80000000	/* Mask */
-#define RDC_WDT_EN		0x00800000 	/* Enable bit */
-#define RDC_WDT_WTI		0x00200000	/* Generate a CPU reset/NMI/WDT irq when WDT timeout is reached */
-#define RDC_WDT_RST		0x00100000	/* Reset bit */
-#define RDC_WDT_WIF		0x00040000	/* WDT IRQ Flag */
-#define RDC_WDT_IRT		0x00000100	/* IRQ Routing table */
-#define RDC_WDT_CNT		0x00000001	/* WDT count */
-
-#define RDC_CLS_TMR		0x80003844	/* Clear timer */
-
-#define RDC_WDT_INTERVAL	(HZ/10+1)
-
-int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-static int ticks = 1000;
-
-/* some device data */
-
-static struct {
-	struct completion stop;
-	volatile int running;
-	struct timer_list timer;
-	volatile int queue;
-	int default_ticks;
-	unsigned long inuse;
-} rdc321x_wdt_device;
-
-/* generic helper functions */
-
-static void rdc321x_wdt_trigger(unsigned long unused)
-{
-	if( rdc321x_wdt_device.running )
-		ticks--;
-
-	/* keep watchdog alive */
-	outl(RDC_WDT_EN|inl(RDC3210_CFGREG_DATA), RDC3210_CFGREG_DATA);	
-	
-	/* requeue?? */
-	if (rdc321x_wdt_device.queue && ticks)
-		mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
-	else {
-		/* ticks doesn't matter anyway */
-		complete(&rdc321x_wdt_device.stop);
-	}
-
-}
-
-static void rdc321x_wdt_reset(void)
-{
-	ticks = rdc321x_wdt_device.default_ticks;
-}
-
-static void rdc321x_wdt_start(void)
-{
-	if (!rdc321x_wdt_device.queue) {
-		rdc321x_wdt_device.queue = 1;
-
-		/* Clear the timer */
-		outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
-		
-		/* Enable watchdog and set the timeout to 81.92 us */
-		outl(RDC_WDT_EN|RDC_WDT_CNT, RDC3210_CFGREG_DATA);
-
-		mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
-	}
-
-	/* if process dies, counter is not decremented */
-	rdc321x_wdt_device.running++;
-}
-
-static int rdc321x_wdt_stop(void)
-{
-	if (rdc321x_wdt_device.running)
-		rdc321x_wdt_device.running = 0;
-
-	ticks = rdc321x_wdt_device.default_ticks;
-
-	return -EIO;
-}
-
-/* filesystem operations */
-
-static int rdc321x_wdt_open(struct inode *inode, struct file *file)
-{
-	if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
-		return -EBUSY;
-
-	return nonseekable_open(inode, file);
-}
-
-static int rdc321x_wdt_release(struct inode *inode, struct file *file)
-{
-	clear_bit(0, &rdc321x_wdt_device.inuse);
-	return 0;
-}
-
-static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	unsigned int value;
-	static struct watchdog_info ident =
-	{
-		.options = WDIOF_CARDRESET,
-		.identity = "RDC321x WDT",
-	};
-
-	switch(cmd) {
-		case WDIOC_KEEPALIVE:
-			rdc321x_wdt_reset();
-			break;
-		case WDIOC_GETSTATUS:
-			/* Read the value from the DATA register */
-			value = inl(RDC3210_CFGREG_DATA);
-			if ( copy_to_user(argp, &value, sizeof(int)) )
-				return -EFAULT;
-			break;
-		case WDIOC_GETSUPPORT:
-			if ( copy_to_user(argp, &ident, sizeof(ident)) )
-				return -EFAULT;
-			break;
-		case WDIOC_SETOPTIONS:
-			if ( copy_from_user(&value, argp, sizeof(int)) )
-				return -EFAULT;
-			switch(value) {
-				case WDIOS_ENABLECARD:
-					rdc321x_wdt_start();
-					break;
-				case WDIOS_DISABLECARD:
-					return rdc321x_wdt_stop();
-				default:
-					return -EINVAL;
-			}
-			break;
-		default:
-    			return -ENOTTY;
-	}
-	return 0;
-}
-
-static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
-{
-	if ( !count )
-		return -EIO;
-
-	rdc321x_wdt_reset();
-
-	return count;
-}
-
-static const struct file_operations rdc321x_wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.ioctl		= rdc321x_wdt_ioctl,
-	.open		= rdc321x_wdt_open,
-	.write		= rdc321x_wdt_write,
-	.release	= rdc321x_wdt_release,
-};
-
-static struct miscdevice rdc321x_wdt_misc = {
-	.minor	= WATCHDOG_MINOR,
-	.name	= "watchdog",
-	.fops	= &rdc321x_wdt_fops,
-};
-
-static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
-{
-	int err;
-
-	if ( (err = misc_register(&rdc321x_wdt_misc)) < 0 ) {
-		printk(KERN_ERR PFX "misc_register failed\n");
-		return err;
-	}
-
-	/* Reset the watchdog */
-	outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
-
-	init_completion(&rdc321x_wdt_device.stop);
-	rdc321x_wdt_device.queue = 0;
-
-	clear_bit(0, &rdc321x_wdt_device.inuse);
-
-	setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
-
-	rdc321x_wdt_device.default_ticks = ticks;
-
-	printk(KERN_INFO PFX "init success\n");
-
-	return 0;
-}
-
-static int rdc321x_wdt_remove(struct platform_device *pdev)
-{
-	if (rdc321x_wdt_device.queue) {
-		rdc321x_wdt_device.queue = 0;
-		wait_for_completion(&rdc321x_wdt_device.stop);
-	}
-
-	misc_deregister(&rdc321x_wdt_misc);
-
-	return 0;
-}
-
-static struct platform_driver rdc321x_wdt_driver = {
-	.probe = rdc321x_wdt_probe,
-	.remove = rdc321x_wdt_remove,
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = "rdc321x_wdt",
-	},
-};
-
-static int __init rdc321x_wdt_init(void)
-{
-	return platform_driver_register(&rdc321x_wdt_driver);
-}
-
-static void __exit rdc321x_wdt_exit(void)
-{
-	platform_driver_unregister(&rdc321x_wdt_driver);
-}
-
-module_init(rdc321x_wdt_init);
-module_exit(rdc321x_wdt_exit);
-
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("RDC321x watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/rdc-2.6/files/drivers/leds/leds-rdc3211.c b/target/linux/rdc-2.6/files/drivers/leds/leds-rdc3211.c
deleted file mode 100644
index ae068af14..000000000
--- a/target/linux/rdc-2.6/files/drivers/leds/leds-rdc3211.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * LED driver for RDC3211 boards
- *
- * Copyright 2007 Florian Fainelli <florian@openwrt.org>
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-
-#include <asm/gpio.h>
-
-static void rdc321x_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
-{
-	gpio_set_value(1, brightness ? 1 : 0);
-}
-
-/* The DMZ led is at GPIO line 1 */
-static struct led_classdev rdc321x_dmz_led = {
-	.name = "rdc321x:dmz",
-	.brightness_set = rdc321x_led_set,
-};
-
-static int rdc321x_leds_probe(struct platform_device *pdev)
-{
-	return led_classdev_register(&pdev->dev, &rdc321x_dmz_led);
-}
-
-static int rdc321x_leds_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&rdc321x_dmz_led);
-	return 0;
-}
-
-static struct platform_driver rdc321x_leds_driver = {
-	.probe = rdc321x_leds_probe,
-	.remove = rdc321x_leds_remove,
-	.driver = {
-		.name = "rdc321x-leds",
-		.owner = THIS_MODULE,
-	}
-};
-
-static int __init rdc321x_leds_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&rdc321x_leds_driver);
-
-	return ret;
-}
-		
-static void __exit rdc321x_leds_exit(void)
-{
-	platform_driver_unregister(&rdc321x_leds_driver);
-}
-
-module_init(rdc321x_leds_init);
-module_exit(rdc321x_leds_exit);
-		
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("RDC321x LED driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/rdc-2.6/files/drivers/mtd/maps/imghdr.h b/target/linux/rdc-2.6/files/drivers/mtd/maps/imghdr.h
deleted file mode 100644
index 7232b7061..000000000
--- a/target/linux/rdc-2.6/files/drivers/mtd/maps/imghdr.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef GT_IMGHDR_H
-#define GT_IMGHDR_H
-
-#define GTIMG_MAGIC		"GMTK"
-
-/* Product ID */
-#define PID_RTL_AIRGO		1
-#define PID_RTL_RALINK		2
-#define PID_RDC_AIRGO		3
-#define PID_RDC_RALINK		5	/* White Lable */
-
-/* Gemtek */
-typedef struct
-{
-	u8		magic[4];		/* ASICII: GMTK */
-	u32		checksum;		/* CRC32 */
-	u32		version;		/* x.x.x.x */
-	u32		kernelsz;		/* The size of the kernel image */
-	u32		imagesz;		/* The length of this image file ( kernel + romfs + this header) */
-	u32		pid;			/* Product ID */
-	u32		fastcksum;		/* Partial CRC32 on (First(256), medium(256), last(512)) */
-	u32		reserved;
-}gt_imghdr_t;
-
-#endif
diff --git a/target/linux/rdc-2.6/files/drivers/mtd/maps/rdc3210.c b/target/linux/rdc-2.6/files/drivers/mtd/maps/rdc3210.c
deleted file mode 100644
index fb2a3f854..000000000
--- a/target/linux/rdc-2.6/files/drivers/mtd/maps/rdc3210.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/*******************************************************************
- * Simple Flash mapping for RDC3210                                *
- *                                                                 *
- *                                                     2005.03.23  *
- *                              Dante Su (dante_su@gemtek.com.tw)  *
- *                          Copyright (C) 2005 Gemtek Corporation  *
- *******************************************************************/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/autoconf.h>
-#include <linux/sched.h>
-#include <linux/squashfs_fs.h>
-
-static struct mtd_info		*rdc3210_mtd;
-
-struct map_info rdc3210_map = 
-{
-	.name =		"RDC3210 Flash",
-	.size =		CONFIG_MTD_RDC3210_SIZE,
-	.bankwidth =	CONFIG_MTD_RDC3210_BUSWIDTH,
-};
-
-/* Dante: This is the default static mapping, however this is nothing but a hint. (Say dynamic mapping) */
-static struct mtd_partition rdc3210_parts[] = 
-{
-#if CONFIG_MTD_RDC3210_SIZE == 0x400000
-	{ name: "linux",   offset:  0,          size: 0x003C0000 },	/* 3840 KB = (Kernel + ROMFS) = (768 KB + 3072 KB) */
-	{ name: "romfs",   offset:  0x000C0000, size: 0x00300000 },	/* 3072 KB */
-	{ name: "nvram",   offset:  0x003C0000, size: 0x00010000 },	/*   64 KB */
-#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
-	{ name: "factory", offset:  0x003D0000, size: 0x00010000 },	/*   64 KB */
-#endif
-	{ name: "bootldr", offset:  0x003E0000, size: 0x00020000 },	/*  128 KB */
-#elif CONFIG_MTD_RDC3210_SIZE == 0x200000
-	{ name: "linux",   offset:  0x00008000, size: 0x001E8000 },
-	{ name: "romfs",   offset:  0x000C8000, size: 0x00128000 },
-	{ name: "nvram",   offset:  0x00000000, size: 0x00008000 },	/*   64 KB */
-#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
-#error Unsupported configuration!
-#endif
-	{ name: "bootldr", offset:  0x001F0000, size: 0x00010000 },
-#else
-#error Unsupported configuration!
-#endif
-};
-
-static __u32 crctab[257] = {
-	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
-	0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
-	0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
-	0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
-	0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
-	0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
-	0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
-	0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
-	0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
-	0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
-	0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
-	0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
-	0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
-	0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
-	0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
-	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
-	0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
-	0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
-	0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
-	0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
-	0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
-	0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
-	0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
-	0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
-	0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
-	0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
-	0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
-	0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
-	0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
-	0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
-	0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
-	0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
-	0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
-	0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
-	0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
-	0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
-	0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
-	0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
-	0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
-	0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
-	0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
-	0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
-	0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
-	0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
-	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
-	0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
-	0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
-	0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
-	0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
-	0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
-	0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
-	0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
-	0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
-	0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
-	0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
-	0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
-	0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
-	0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
-	0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
-	0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
-	0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
-	0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
-	0
-};
-
-static __u32 crc32(__u8 * buf, __u32 len)
-{
-	register int i;
-	__u32 sum;
-	register __u32 s0;
-	s0 = ~0;
-	for (i = 0; i < len; i++) {
-		s0 = (s0 >> 8) ^ crctab[(__u8) (s0 & 0xFF) ^ buf[i]];
-	}
-	sum = ~s0;
-	return sum;
-}
-
-static void erase_callback(struct erase_info *done)
-{
-	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
-	wake_up(wait_q);
-}
-
-static int erase_write (struct mtd_info *mtd, unsigned long pos, 
-			int len, const char *buf)
-{
-	struct erase_info erase;
-	DECLARE_WAITQUEUE(wait, current);
-	wait_queue_head_t wait_q;
-	size_t retlen;
-	int ret;
-
-	/*
-	 * First, let's erase the flash block.
-	 */
-
-	init_waitqueue_head(&wait_q);
-	erase.mtd = mtd;
-	erase.callback = erase_callback;
-	erase.addr = pos;
-	erase.len = len;
-	erase.priv = (u_long)&wait_q;
-
-	set_current_state(TASK_INTERRUPTIBLE);
-	add_wait_queue(&wait_q, &wait);
-
-	ret = mtd->erase(mtd, &erase);
-	if (ret) {
-		set_current_state(TASK_RUNNING);
-		remove_wait_queue(&wait_q, &wait);
-		printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
-				     "on \"%s\" failed\n",
-			pos, len, mtd->name);
-		return ret;
-	}
-
-	schedule();  /* Wait for erase to finish. */
-	remove_wait_queue(&wait_q, &wait);
-
-	/*
-	 * Next, writhe data to flash.
-	 */
-
-	ret = mtd->write (mtd, pos, len, &retlen, buf);
-	if (ret)
-		return ret;
-	if (retlen != len)
-		return -EIO;
-	return 0;
-}
-
-static int __init init_rdc3210_map(void)
-{
-	rdc3210_map.phys = -rdc3210_map.size;
-       	printk(KERN_NOTICE "flash device: %x at %x\n", rdc3210_map.size, rdc3210_map.phys);
-       	
-	rdc3210_map.map_priv_1 = (unsigned long)(rdc3210_map.virt = ioremap_nocache(rdc3210_map.phys, rdc3210_map.size));
-
-	if (!rdc3210_map.map_priv_1) 
-	{
-		printk("Failed to ioremap\n");
-		return -EIO;
-	}
-	rdc3210_mtd = do_map_probe("cfi_probe", &rdc3210_map);
-#ifdef CONFIG_MTD_RDC3210_STATIC_MAP	/* Dante: This is for fixed map */
-	if (rdc3210_mtd) 
-	{
-		rdc3210_mtd->module = THIS_MODULE;
-		add_mtd_partitions(rdc3210_mtd, rdc3210_parts, sizeof(rdc3210_parts)/sizeof(rdc3210_parts[0]));
-		return 0;
-	}
-#else	/* Dante: This is for dynamic mapping */
-
-#include "imghdr.h"
-
-	typedef struct {
-		u8	magic[4];
-		u32	kernelsz, ramdisksz;
-		u8	magic2[4];
-		u32	sz2;
-	}sc_imghdr_t;
-
-	if (rdc3210_mtd) 
-	{	// Dante
-		sc_imghdr_t	*hdr2= (sc_imghdr_t *)(rdc3210_map.map_priv_1);
-		gt_imghdr_t	*hdr = (gt_imghdr_t *)hdr2
-#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
-			, *ptmp
-#endif
-			;
-		int	len, tmp, tmp2, tmp3, tmp4, hdr_type = 0;
-		
-		if(!memcmp(hdr->magic, GTIMG_MAGIC, 4))
-		{
-			hdr_type = 1;
-			tmp = hdr->kernelsz + sizeof(gt_imghdr_t);
-			tmp2 = rdc3210_mtd->erasesize;
-			tmp3 = ((tmp / 32) + ((tmp % 32) ? 1 : 0)) * 32;
-			tmp4 = ((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2;
-		}
-#ifndef CONFIG_MTD_RDC3210_ALLOW_JFFS2
-		else if (!memcmp(hdr2->magic, "CSYS", 4))
-		{
-			hdr_type = 2;
-			tmp = hdr2->ramdisksz + hdr2->kernelsz + sizeof(sc_imghdr_t);
-			tmp2 = rdc3210_mtd->erasesize;
-			tmp3 = ((tmp / 32) + ((tmp % 32) ? 1 : 0)) * 32;
-			tmp4 = ((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2;
-		}
-#endif
-		else
-		{
-			iounmap((void *)rdc3210_map.map_priv_1);
-			rdc3210_map.map_priv_1 = 0L;
-			rdc3210_map.virt = NULL;
-			printk("Invalid MAGIC for Firmware Image!!!\n");
-			return -EIO;
-		}
-#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
-		tmp = (tmp3 == tmp4) ? tmp4 + tmp2 : tmp4;
-		if ((ptmp = (gt_imghdr_t *)vmalloc(tmp)) == NULL)
-		{
-			iounmap((void *)rdc3210_map.map_priv_1);
-			rdc3210_map.map_priv_1 = 0L;
-			rdc3210_map.virt = NULL;
-			printk("Can't allocate 0x%08x for flash-reading buffer!\n", tmp);
-			return -ENOMEM;
-		}
-		if (rdc3210_mtd->read(rdc3210_mtd, 0, tmp, &len, (__u8 *)ptmp) || len != tmp)
-		{
-			vfree(ptmp);
-			iounmap((void *)rdc3210_map.map_priv_1);
-			rdc3210_map.map_priv_1 = 0L;
-			rdc3210_map.virt = NULL;
-			printk("Can't read that much flash! Read 0x%08x of it.\n", len);
-			return -EIO;
-		}
-#endif
-#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
-		/* 1. Adjust Redboot */
-		tmp = rdc3210_mtd->size - rdc3210_parts[4].size;
-		rdc3210_parts[4].offset = tmp - (tmp % tmp2);
-		rdc3210_parts[4].size   = rdc3210_mtd->size - rdc3210_parts[4].offset;
-		
-		/* 2. Adjust Factory Default */
-		tmp -= rdc3210_parts[3].size;
-		rdc3210_parts[3].offset = tmp - (tmp % tmp2);
-		rdc3210_parts[3].size   = rdc3210_parts[4].offset - rdc3210_parts[3].offset;
-#else
-		/* 1. Adjust Redboot */
-		tmp = rdc3210_mtd->size - rdc3210_parts[3].size;
-		rdc3210_parts[3].offset = tmp - (tmp % tmp2);
-		rdc3210_parts[3].size   = rdc3210_mtd->size - rdc3210_parts[3].offset;
-#endif
-		if (hdr_type == 1) {
-		/* 3. Adjust NVRAM */
-#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
-		if (*(__u32 *)(((unsigned char *)ptmp)+tmp3) == SQUASHFS_MAGIC)
-		{
-			len = 1;
-			tmp4 = tmp3;
-			tmp = hdr->imagesz;
-		rdc3210_parts[2].name   = "rootfs_data";
-		rdc3210_parts[2].offset = rdc3210_parts[0].offset + (((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2);
-		}
-		else
-#else
-			tmp4 = tmp3;
-#endif
-		{
-			len = 0;
-		tmp -= rdc3210_parts[2].size;
-		rdc3210_parts[2].offset = tmp - (tmp % tmp2);
-		}
-		rdc3210_parts[2].size   = rdc3210_parts[3].offset - rdc3210_parts[2].offset;
-		}
-		else if (hdr_type == 2)
-		{
-			len = 0;
-			tmp4 = tmp3;
-		}
-		
-		/* 4. Adjust Linux (Kernel + ROMFS) */
-		rdc3210_parts[0].size   = rdc3210_parts[len + hdr_type + 1].offset - rdc3210_parts[0].offset;
-
-		/* 5. Adjust ROMFS */
-		rdc3210_parts[1].offset = rdc3210_parts[0].offset + tmp4;
-		rdc3210_parts[1].size   = rdc3210_parts[hdr_type + 1].offset - rdc3210_parts[1].offset;
-#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
-		if (!(hdr->reserved || len))
-		{
-			__u8	buf[1024];
-			ptmp->reserved = hdr->imagesz;
-			ptmp->imagesz  = tmp4;
-			ptmp->checksum = ptmp->fastcksum = 0;
-			memcpy(buf, ptmp, 0x100);
-			memcpy(buf + 0x100, ((__u8 *)ptmp) + ((tmp4 >> 1) - ((tmp4 & 0x6) >> 1)), 0x100);
-			memcpy(buf + 0x200, ((__u8 *)ptmp) + (tmp4 - 0x200), 0x200);
-			ptmp->fastcksum = crc32(buf, sizeof(buf));
-			ptmp->checksum = crc32((__u8 *)ptmp, tmp4);
-			if (rdc3210_mtd->unlock) rdc3210_mtd->unlock(rdc3210_mtd, 0, tmp2);
-			if ((len = erase_write(rdc3210_mtd, 0, tmp2, (char *)ptmp)))
-			{
-				vfree(ptmp);
-				iounmap((void *)rdc3210_map.map_priv_1);
-				rdc3210_map.map_priv_1 = 0L;
-				rdc3210_map.virt = NULL;
-				printk("Couldn't erase! Got %d.\n", len);
-				return len;
-			}
-			if (rdc3210_mtd->sync) rdc3210_mtd->sync(rdc3210_mtd);
-		}
-		vfree(ptmp);
-#endif
-		rdc3210_mtd->owner = THIS_MODULE;
-		add_mtd_partitions(rdc3210_mtd, rdc3210_parts, sizeof(rdc3210_parts)/sizeof(rdc3210_parts[0]));
-		return 0;
-	}
-#endif
-	iounmap((void *)rdc3210_map.map_priv_1);
-	rdc3210_map.map_priv_1 = 0L;
-	rdc3210_map.virt = NULL;
-	return -ENXIO;
-}
-
-static void __exit cleanup_rdc3210_map(void)
-{
-	if (rdc3210_mtd) 
-	{
-		del_mtd_partitions(rdc3210_mtd);
-		map_destroy(rdc3210_mtd);
-	}
-	
-	if (rdc3210_map.map_priv_1) 
-	{
-		iounmap((void *)rdc3210_map.map_priv_1);
-		rdc3210_map.map_priv_1 = 0L;
-		rdc3210_map.virt = NULL;
-	}
-}
-
-module_init(init_rdc3210_map);
-module_exit(cleanup_rdc3210_map);
diff --git a/target/linux/rdc-2.6/files/drivers/net/r6040.c b/target/linux/rdc-2.6/files/drivers/net/r6040.c
deleted file mode 100644
index 376b6ecfe..000000000
--- a/target/linux/rdc-2.6/files/drivers/net/r6040.c
+++ /dev/null
@@ -1,1041 +0,0 @@
-/* r6040.c: A RDC R6040 FastEthernet driver for linux. */
-/*
-	Re-written 2004 by Sten Wang.
-
-	Copyright 1994-2000 by Donald Becker.
-	Copyright 1993 United States Government as represented by the
-	Director, National Security Agency.	 This software may be used and
-	distributed according to the terms of the GNU General Public License,
-	incorporated herein by reference.
-
-	This driver is for RDC R6040 FastEthernet MAC series.
-	For kernel version after 2.4.22
-
-	Modification List
-	----------	------------------------------------------------
-	08-24-2006	Support at linux 2.6.10 above
-	03-24-2006	Support NAPI
-	03-21-2006	By Charies,change spin_lock_irqsave(lp->lock, flags) to
-			spin_lock_irqsave(&lp->lock, flags) in set_multicast_list
-	03-15-2006      Modify the set_multicast_list ,due to when re-plug the ethernet,
-			it will forget the previous setting
-	07-12-2005      Tim, modify the set_multicast_list
-	03-28-2005      Tim, modify some error mac register offset in 
-	                function set_multicast_list
-	03-27-2005	Tim, Add the internal state machine reset
-			Sten, If multicast address more than 4, enter PROM mode
-			Changed rdc to r6040
-	12-22-2004	Sten Init MAC MBCR register=0x012A
-			PHY_CAP = 0x01E1
-
-	Need to Do LIst:
-	1. If multicast address more than 4, use the multicast address hash
-*/
-
-#define DRV_NAME	"r6040"
-#define DRV_VERSION	"0.13"
-#define DRV_RELDATE	"24Aug2006"
-
-/* PHY CHIP Address */
-#define PHY1_ADDR	1	/* For MAC1 */
-#define PHY2_ADDR	2	/* For MAC2 */
-#define PHY_MODE	0x3100	/* PHY CHIP Register 0 */
-#define PHY_CAP		0x01E1	/* PHY CHIP Register 4 */
-
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT  	(6000 * HZ / 1000)
-#define TIMER_WUT	(jiffies + HZ * 1)/* timer wakeup time : 1 second */
-
-/* RDC MAC ID */
-#define RDC_MAC_ID	0x6040
-
-/* RDC MAC I/O Size */
-#define R6040_IO_SIZE	256
-
-/* RDC Chip PCI Command */
-#define R6040_PCI_CMD	0x0005	/* IO, Master */
-
-/* MAX RDC MAC */
-#define MAX_MAC		2
-
-/* MAC setting */
-#define TX_DCNT		0x80	/* TX descriptor count */
-#define RX_DCNT		0x80	/* RX descriptor count */
-#define MAX_BUF_SIZE	0x600
-#define ALLOC_DESC_SIZE	((TX_DCNT+RX_DCNT)*sizeof(struct r6040_descriptor)+0x10)
-#define MBCR_DEFAULT	0x012A	/* MAC Bus Control Register */
-
-/* Debug enable or not */
-#define RDC_DEBUG	0
-
-#if RDC_DEBUG > 1
-#define RDC_DBUG(msg, value) printk("%s %x\n", msg, value);
-#else
-#define RDC_DBUG(msg, value)
-#endif
-
-
-#include <linux/module.h>
-#include <linux/version.h>
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
-#include <linux/moduleparam.h>
-#endif
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/init.h>
-#include <linux/delay.h>	/* for udelay() */
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/crc32.h>
-#include <linux/spinlock.h>
-
-#include <asm/processor.h>
-#include <asm/bitops.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-
-MODULE_AUTHOR("Sten Wang <sten.wang@rdc.com.tw>");
-MODULE_LICENSE("GPL");
-#ifdef CONFIG_R6040_NAPI
-MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet Driver");
-#else
-MODULE_DESCRIPTION("RDC R6040 PCI FastEthernet Driver");
-#endif
-
-#define R6040_INT_MASK			0x0011
-
-struct r6040_descriptor {
-	u16	status, len;		/* 0-3 */
-	u32	buf;			/* 4-7 */
-	u32	ndesc;			/* 8-B */
-	u32	rev1;			/* C-F */
-	char	*vbufp;			/* 10-13 */
-	struct r6040_descriptor *vndescp;	/* 14-17 */
-	struct sk_buff *skb_ptr;	/* 18-1B */
-	u32	rev2;			/* 1C-1F */
-} __attribute__(( aligned(32) ));
-
-struct r6040_private {
-	struct net_device_stats stats;
-	spinlock_t lock;
-  	struct timer_list timer;
-	struct pci_dev *pdev;
-
-	struct r6040_descriptor *rx_insert_ptr;
-	struct r6040_descriptor *rx_remove_ptr;
-	struct r6040_descriptor *tx_insert_ptr;
-	struct r6040_descriptor *tx_remove_ptr;
-	u16	tx_free_desc, rx_free_desc, phy_addr, phy_mode;
-	u16	mcr0, mcr1;
-	dma_addr_t desc_dma;
-	char	*desc_pool;
-	u16	switch_sig;
-};
-
-struct r6040_chip_info {
-	const char *name;
-	u16 pci_flags;
-	int io_size;
-	int drv_flags;
-};
-
-#ifdef CONFIG_R6040_NAPI
-static int NAPI_status;
-#endif
-
-static int __devinitdata printed_version;
-#ifdef CONFIG_R6040_NAPI
-static char version[] __devinitdata =
-	KERN_INFO DRV_NAME ": RDC R6040 NAPI net driver, version "DRV_VERSION " (" DRV_RELDATE ")\n";	
-#else
-static char version[] __devinitdata =
-	KERN_INFO DRV_NAME ": RDC R6040 net driver, version "DRV_VERSION " (" DRV_RELDATE ")\n";	
-#endif
-static struct r6040_chip_info r6040_chip_info[] __devinitdata =
-{
-	{ "RDC R6040 Knight", R6040_PCI_CMD, R6040_IO_SIZE, 0}
-};
-static char *parent = NULL;
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
-static int NUM_MAC_TABLE = 2 ;
-module_param(parent, charp, 0444);
-#else
-MODULE_PARM(parent, "s");
-#endif
-MODULE_PARM_DESC(parent, "Parent network device name");
-
-static int phy_table[] = { 0x1, 0x2};
-static u8 adr_table[2][8] = {{0x00, 0x00, 0x60, 0x00, 0x00, 0x01}, {0x00, 0x00, 0x60, 0x00, 0x00, 0x02}};
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
-	module_param_array(adr_table, int, &NUM_MAC_TABLE, 0644);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0) 
-	module_param_array(adr_table, int, NUM_MAC_TABLE, 0644);
-#else
-	MODULE_PARM(adr_table, "2-4i");
-#endif 
-MODULE_PARM_DESC(adr_table, "MAC Address (assigned)");
-
-static int r6040_open(struct net_device *dev);
-static int r6040_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t r6040_interrupt(int irq, void *dev_id);
-static struct net_device_stats *r6040_get_stats(struct net_device *dev);
-static int r6040_close(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static struct ethtool_ops netdev_ethtool_ops;
-static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
-static void r6040_down(struct net_device *dev);
-static void r6040_up(struct net_device *dev);
-static void r6040_tx_timeout (struct net_device *dev);
-static void r6040_timer(unsigned long);
-
-static int phy_mode_chk(struct net_device *dev);
-static int phy_read(int ioaddr, int phy_adr, int reg_idx);
-static void phy_write(int ioaddr, int phy_adr, int reg_idx, int dat);
-static void rx_buf_alloc(struct r6040_private *lp,struct net_device *dev);
-#ifdef CONFIG_R6040_NAPI
-static int r6040_poll(struct net_device *netdev, int *budget);
-#endif
-
-
-static int __devinit r6040_init_one (struct pci_dev *pdev,
-					 const struct pci_device_id *ent)
-{
-	struct net_device *dev;
-	struct r6040_private *lp;
-	int ioaddr, io_size, err;
-	static int card_idx = -1; 
-	int chip_id = (int)ent->driver_data;
-
-	RDC_DBUG("r6040_init_one()", 0);
-
-	if (printed_version++)
-		printk(version);
-
-	if ((err = pci_enable_device (pdev)))
-		return err;
-
-	/* this should always be supported */
-	if (pci_set_dma_mask(pdev, 0xffffffff)) {
-		printk(KERN_ERR DRV_NAME "32-bit PCI DMA addresses not supported by the card!?\n");
-		return  -ENODEV;
-	}
-
-	/* IO Size check */
-	io_size = r6040_chip_info[chip_id].io_size;
-	if (pci_resource_len  (pdev, 0) < io_size) {
-		return  -ENODEV;
-	}
-
-	ioaddr = pci_resource_start (pdev, 0);	/* IO map base address */
-	pci_set_master(pdev);
-
-	dev = alloc_etherdev(sizeof(struct r6040_private));
-	if (dev == NULL)
-		return -ENOMEM;
-	SET_MODULE_OWNER(dev);
-
-	if (pci_request_regions(pdev, DRV_NAME)) {
-		printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
-		err = -ENODEV;
-		goto err_out_disable;
-	}
-
-	/* Init system & device */
-	lp = dev->priv;
-	dev->base_addr = ioaddr;
-	dev->irq = pdev->irq;
-
-	spin_lock_init(&lp->lock);
-	pci_set_drvdata(pdev, dev);
-
-	/* Set MAC address */
-	card_idx++;
-	memcpy(dev->dev_addr, (u8 *)&adr_table[card_idx][0], 6);
-
-	/* Link new device into r6040_root_dev */
-	lp->pdev = pdev;
-
-	/* Init RDC private data */
-	lp->mcr0 = 0x1002;
-	lp->phy_addr = phy_table[card_idx];
-	lp->switch_sig = 0;
-
-	/* The RDC-specific entries in the device structure. */
-	dev->open = &r6040_open;
-	dev->hard_start_xmit = &r6040_start_xmit;
-	dev->stop = &r6040_close;
-	dev->get_stats = &r6040_get_stats;
-	dev->set_multicast_list = &set_multicast_list;
-	dev->do_ioctl = &netdev_ioctl;
-	dev->ethtool_ops = &netdev_ethtool_ops;
-	dev->tx_timeout = &r6040_tx_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef CONFIG_R6040_NAPI
-	dev->poll = &r6040_poll;
-	dev->weight = 64;
-#endif
-
-	/* Register net device. After this dev->name assign */
-	if ((err = register_netdev(dev))) {
-		printk(KERN_ERR DRV_NAME ": Failed to register net device\n");
-		goto err_out_res;
-	}
-
-	netif_carrier_on(dev);
-	return 0;
-
-err_out_res:
-	pci_release_regions(pdev);
-err_out_disable:
-	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-	kfree(dev);
-
-	return err;
-}
-
-static void __devexit r6040_remove_one (struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	
-	unregister_netdev(dev);
-	pci_release_regions(pdev);
-	kfree(dev);
-	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-}
-
-static int
-r6040_open(struct net_device *dev)
-{
-	struct r6040_private *lp = dev->priv;
-	int i;
-
-	RDC_DBUG("r6040_open()", 0);
-
-	/* Request IRQ and Register interrupt handler */
-	i = request_irq(dev->irq, &r6040_interrupt, SA_SHIRQ, dev->name, dev);
-	if (i) return i;
-
-	/* Allocate Descriptor memory */
-	lp->desc_pool = pci_alloc_consistent(lp->pdev, ALLOC_DESC_SIZE, &lp->desc_dma); 
-	if (!lp->desc_pool) return -ENOMEM; 
-
-	r6040_up(dev);
-
-	netif_start_queue(dev);
-
-	if (lp->switch_sig != 0x0243)
-	{
-	/* set and active a timer process */
-	init_timer(&lp->timer);
-	lp->timer.expires = TIMER_WUT;
-	lp->timer.data = (unsigned long)dev;
-	lp->timer.function = &r6040_timer;
-	add_timer(&lp->timer);
-	}
-	return 0;
-}
-
-static void
-r6040_tx_timeout (struct net_device *dev)
-{
-	struct r6040_private *lp = dev->priv;
-	//int ioaddr = dev->base_addr;
-	//struct r6040_descriptor *descptr = lp->tx_remove_ptr;
-
-	RDC_DBUG("r6040_tx_timeout()", 0);
-
-	/* Transmitter timeout, serious problems. */
-	/* Sten: Nothing need to do so far. */
-	printk(KERN_ERR DRV_NAME ": Big Trobule, transmit timeout/n"); 
-	lp->stats.tx_errors++;
-	netif_stop_queue(dev);
-
-//printk("<RDC> XMT timedout: CR0 %x, CR40 %x, CR3C %x, CR2C %x, CR30 %x, CR34 %x, CR38 %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c), inw(ioaddr+0x2c), inw(ioaddr+0x30), inw(ioaddr+0x34), inw(ioaddr+0x38));
-
-//printk("<RDC> XMT_TO: %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
-}
-
-
-static int
-r6040_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct r6040_private *lp = dev->priv;
-	struct r6040_descriptor *descptr;
-	int ioaddr = dev->base_addr;
-	unsigned long flags;
-
-	RDC_DBUG("r6040_start_xmit()", 0);
-
-	if (skb == NULL)	/* NULL skb directly return */ 
-		return 0;
-	if (skb->len >= MAX_BUF_SIZE) {	/* Packet too long, drop it */
-		dev_kfree_skb(skb);
-		return 0;
-	}
-
-	/* Critical Section */
-	spin_lock_irqsave(&lp->lock, flags);
-
-	/* TX resource check */
-	if (!lp->tx_free_desc) { 
-		spin_unlock_irqrestore(&lp->lock, flags);
-		printk(KERN_ERR DRV_NAME ": NO TX DESC "); 
-		return 1;
-	}
-
-	/* Statistic Counter */
-	lp->stats.tx_packets++;
-	lp->stats.tx_bytes += skb->len;
-	
-	/* Set TX descriptor & Transmit it */
-	lp->tx_free_desc--;
-	descptr = lp->tx_insert_ptr;
-	if (skb->len < 0x3c) descptr->len = 0x3c;
-	else descptr->len = skb->len;
-	descptr->skb_ptr = skb;
-	descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, skb->data, skb->len, PCI_DMA_TODEVICE));
-	descptr->status = 0x8000;
-	outw(0x01, ioaddr + 0x14);
-	lp->tx_insert_ptr = descptr->vndescp;
-
-#if RDC_DEBUG
- printk("Xmit(): %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
-#endif 
-
-	/* If no tx resource, stop */
-	if (!lp->tx_free_desc) 
-		netif_stop_queue(dev);
-
-	dev->trans_start = jiffies;
-	spin_unlock_irqrestore(&lp->lock, flags);
-	return 0;
-}
-
-/* The RDC interrupt handler. */
-static irqreturn_t
-r6040_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct r6040_private *lp;
-	struct r6040_descriptor *descptr;
-	struct sk_buff *skb_ptr;
-	int ioaddr, status;
-	unsigned long flags;
-#ifdef CONFIG_R6040_NAPI	
-	int handled = 1;
-#else
-	int handled = 0;
-#endif	
-
-	RDC_DBUG("r6040_interrupt()", 0);
-	if (dev == NULL) {
-		printk (KERN_ERR DRV_NAME ": INT() unknown device.\n");
-		return IRQ_RETVAL(handled);
-	}
-
-	lp = (struct r6040_private *)dev->priv;
-	spin_lock_irqsave(&lp->lock, flags);
-
-	/* Check MAC Interrupt status */
-	ioaddr = dev->base_addr;
-	outw(0x0, ioaddr + 0x40);	/* Mask Off RDC MAC interrupt */
-	status = inw(ioaddr + 0x3c);	/* Read INTR status and clear */
-	
-
-#ifdef CONFIG_R6040_NAPI		
-
-	    if(netif_rx_schedule_prep(dev))	
-	        {
-	        NAPI_status = status ;     
-		__netif_rx_schedule(dev);
-	        }
-	
-	spin_unlock_irqrestore(&lp->lock, flags);
-	return IRQ_RETVAL(handled);	
-#else		
-	/* TX interrupt request */
-	if (status & 0x10) {
-		handled = 1;
-		descptr = lp->tx_remove_ptr;
-		while(lp->tx_free_desc < TX_DCNT) {
-			if (descptr->status & 0x8000) break; /* Not complte */
-			skb_ptr = descptr->skb_ptr;
-			pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE);
-			dev_kfree_skb_irq(skb_ptr); /* Free buffer */
-			descptr->skb_ptr = 0;
-			descptr = descptr->vndescp; /* To next descriptor */
-			lp->tx_free_desc++;
-		}
-		lp->tx_remove_ptr = descptr;
-		if (lp->tx_free_desc) netif_wake_queue(dev);
-	} 
-
-	/* RX interrupt request */
-	if (status & 0x01) {
-		handled = 1;
-		descptr = lp->rx_remove_ptr;
-		while(lp->rx_free_desc) {
-			if (descptr->status & 0x8000) break; /* No Rx packet */
-			skb_ptr = descptr->skb_ptr;
-			descptr->skb_ptr = 0;
-			skb_ptr->dev = dev;
-			skb_put(skb_ptr, descptr->len - 4);
-			pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
-             		skb_ptr->protocol = eth_type_trans(skb_ptr, dev);
-             		netif_rx(skb_ptr);  /* Send to upper layer */
-			lp->stats.rx_packets++;
-			lp->stats.rx_bytes += descptr->len;
-			descptr = descptr->vndescp; /* To next descriptor */
-			lp->rx_free_desc--;
-		}
-		lp->rx_remove_ptr = descptr;
-	}
-
-	/* Allocate new RX buffer */
-	if (lp->rx_free_desc < RX_DCNT) rx_buf_alloc(lp,dev);
-
-	outw(R6040_INT_MASK, ioaddr + 0x40);	/* TX/RX interrupt enable */
-	spin_unlock_irqrestore(&lp->lock, flags);
-#endif
-	return IRQ_RETVAL(handled);
-}
-
-
-static struct net_device_stats *
-r6040_get_stats(struct net_device *dev)
-{
-	struct r6040_private *lp = dev->priv;
-
-	RDC_DBUG("r6040_get_stats()", 0);
-	return &lp->stats;
-}
-
-/*
- *     Set or clear the multicast filter for this adaptor.
- */
-static void
-set_multicast_list(struct net_device *dev)
-{
-	struct r6040_private *lp = dev->priv;
-	struct dev_mc_list *mcptr;
-	int ioaddr = dev->base_addr;
-	u16 *adrp, i;
-	unsigned long flags;
-
-	RDC_DBUG("set_multicast_list()", 0);
-
-	/* MAC Address */	
-	adrp = (u16 *) dev->dev_addr;
-	outw(adrp[0], ioaddr + 0x68); 
-	outw(adrp[1], ioaddr + 0x6A); 
-	outw(adrp[2], ioaddr + 0x6C); 
-
-
-#if RDC_DEBUG 
-	printk("MAC ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]);
-#endif
-
-	/* Promiscous Mode */
-	spin_lock_irqsave(&lp->lock, flags);
-	i = inw(ioaddr) & ~0x0120;		/* Clear AMCP & PROM */
-	if (dev->flags & IFF_PROMISC)
-	    {	
-	 	i |= 0x0020;
-		lp->mcr0 |= 0x0020 ;
-	    }
-	if (dev->mc_count > 4) i |= 0x0020;	/* Too many multicast address */
-	outw(i, ioaddr);
-	spin_unlock_irqrestore(&lp->lock, flags);
-	
-	/* Multicast Address */
-	if (dev->mc_count > 4)	/* Wait to do: Hash Table for multicast */
-		return;
-
-	/* Multicast Address 1~4 case */
-	for (i = 0, mcptr = dev->mc_list; (i<dev->mc_count) && (i<4); i++) {
-		adrp = (u16 *)mcptr->dmi_addr;
-		outw(adrp[0], ioaddr + 0x70 + 8*i); 
-		outw(adrp[1], ioaddr + 0x72 + 8*i); 
-		outw(adrp[2], ioaddr + 0x74 + 8*i); 
-		mcptr = mcptr->next;
-#if RDC_DEBUG 
-	printk("M_ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]);
-#endif
-	}
-	for (i = dev->mc_count; i < 4; i++) {
-		outw(0xffff, ioaddr + 0x68 + 8*i); 
-		outw(0xffff, ioaddr + 0x6A + 8*i); 
-		outw(0xffff, ioaddr + 0x6C + 8*i); 
-	}
-}
-
-static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
-{
-	struct r6040_private *rp = dev->priv;
-
-	strcpy (info->driver, DRV_NAME);
-	strcpy (info->version, DRV_VERSION);
-	strcpy (info->bus_info, pci_name(rp->pdev));
-}
-
-static struct ethtool_ops netdev_ethtool_ops = {
-	.get_drvinfo		= netdev_get_drvinfo,
-};
-
-static int
-r6040_close(struct net_device *dev)
-{
-	struct r6040_private *lp = dev->priv;
-
-	RDC_DBUG("r6040_close()", 0);
-
- 	/* deleted timer */
- 	del_timer_sync(&lp->timer);
-
-	spin_lock_irq(&lp->lock);
-
-	netif_stop_queue(dev);
-
-	r6040_down(dev);
-
-	spin_unlock_irq(&lp->lock);
-
-	return 0;
-}
-
-static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	struct r6040_private *lp = dev->priv;
-
-	RDC_DBUG("netdev_ioctl()", 0);
-	if (lp->switch_sig == 0x0243 && cmd == SIOCDEVPRIVATE)
-	{
-		unsigned long *data = (unsigned long *)rq->ifr_data, args[4];
-		int ioaddr = dev->base_addr;
-		unsigned int val;
-
-		data = (unsigned long *)rq->ifr_data;
-		if (copy_from_user(args, data, 4*sizeof(unsigned long)))
-			return -EFAULT;
-
-		/* port priority */
-		if(args[0]&(1<<31))phy_write(ioaddr,29,19,(phy_read(ioaddr,29,19)|0x2000));	/* port 0 */
-		if(args[0]&(1<<29))phy_write(ioaddr,29,19,(phy_read(ioaddr,29,19)|0x0020));	/* port 1 */
-		if(args[0]&(1<<27))phy_write(ioaddr,29,20,(phy_read(ioaddr,29,20)|0x2000));	/* port 2 */
-		if(args[0]&(1<<25))phy_write(ioaddr,29,20,(phy_read(ioaddr,29,20)|0x0020));	/* port 3 */
-
-	} 
-	return -EOPNOTSUPP;
-}
-
-/**
-	Stop RDC MAC and Free the allocated resource
- */
-static void r6040_down(struct net_device *dev)
-{
-	struct r6040_private *lp = dev->priv;
-	int i;
-	int ioaddr = dev->base_addr;
-
-	RDC_DBUG("r6040_down()", 0);
-
-	/* Stop MAC */
-	outw(0x0000, ioaddr + 0x40);	/* Mask Off Interrupt */
-	outw(0x0001, ioaddr + 0x04);	/* Reset RDC MAC */
-	i = 0;
-	do{}while((i++ < 2048) && (inw(ioaddr + 0x04) & 0x1));
-	
-	free_irq(dev->irq, dev);
-
-	/* Free RX buffer */
-	for (i = 0; i < RX_DCNT; i++) {
-		if (lp->rx_insert_ptr->skb_ptr) {
-			pci_unmap_single(lp->pdev, lp->rx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
-			dev_kfree_skb(lp->rx_insert_ptr->skb_ptr);
-			lp->rx_insert_ptr->skb_ptr = 0;
-		}
-		lp->rx_insert_ptr = lp->rx_insert_ptr->vndescp;
-	}
-
-	/* Free TX buffer */
-	for (i = 0; i < TX_DCNT; i++) {
-		if (lp->tx_insert_ptr->skb_ptr) {
-			pci_unmap_single(lp->pdev, lp->tx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_TODEVICE);
-			dev_kfree_skb(lp->tx_insert_ptr->skb_ptr);
-			lp->rx_insert_ptr->skb_ptr = 0;
-		}
-		lp->tx_insert_ptr = lp->tx_insert_ptr->vndescp;
-	}
-
-	/* Free Descriptor memory */
-	pci_free_consistent(lp->pdev, ALLOC_DESC_SIZE, lp->desc_pool, lp->desc_dma);
-}
-
-
-
-#ifdef CONFIG_R6040_NAPI
-static int r6040_poll(struct net_device *dev, int *budget)
-{
-	struct r6040_private *lp;
-	struct r6040_descriptor *descptr;
-	struct sk_buff *skb_ptr;
-	int ioaddr, status;
-	unsigned long flags;
-	
-	
-	ioaddr = dev->base_addr;	
-	lp = (struct r6040_private *)dev->priv;
-	unsigned long rx_work = dev->quota ;
-	unsigned long rx ;
-	
-	
-#if 1
-	/* TX interrupt request */
-	if (NAPI_status & 0x10) {
-		
-		descptr = lp->tx_remove_ptr;
-		while(lp->tx_free_desc < TX_DCNT) {
-			if (descptr->status & 0x8000) break; /* Not complte */
-			skb_ptr = descptr->skb_ptr;
-			pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE);
-			dev_kfree_skb_irq(skb_ptr); /* Free buffer */
-			descptr->skb_ptr = 0;
-			descptr = descptr->vndescp; /* To next descriptor */
-			lp->tx_free_desc++;
-		}
-		lp->tx_remove_ptr = descptr;
-		if (lp->tx_free_desc) netif_wake_queue(dev);
-	} 
-#endif	
-#if 1
-	/* RX interrupt request */
-	if (NAPI_status & 0x01) {		
-		
-		descptr = lp->rx_remove_ptr;
-		while(lp->rx_free_desc) {
-			if (descptr->status & 0x8000) break; /* No Rx packet */
-			skb_ptr = descptr->skb_ptr;
-			descptr->skb_ptr = 0;
-			skb_ptr->dev = dev;
-			skb_put(skb_ptr, descptr->len - 4);
-			pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
-             		skb_ptr->protocol = eth_type_trans(skb_ptr, dev);             		  
-             		netif_receive_skb(skb_ptr); /* Send to upper layer */
-			lp->stats.rx_packets++;
-			lp->stats.rx_bytes += descptr->len;
-			descptr = descptr->vndescp; /* To next descriptor */
-			lp->rx_free_desc--;
-		}
-		lp->rx_remove_ptr = descptr;
-		
-	}
-	/* Allocate new RX buffer */
-	if (lp->rx_free_desc < RX_DCNT) rx_buf_alloc(lp,dev);
-	
-	local_irq_disable();
-	netif_rx_complete(dev);
-	outw(R6040_INT_MASK,ioaddr + 0x40);	
-	local_irq_enable();
-	return 0;
-#endif		
-}
-#endif
-
-/* Init RDC MAC */
-static void r6040_up(struct net_device *dev)
-{
-	struct r6040_private *lp = dev->priv;
-	struct r6040_descriptor *descptr;
-	int i;
-	int ioaddr = dev->base_addr;
-	u32 tmp_addr;
-	dma_addr_t desc_dma, start_dma;
-	
-	RDC_DBUG("r6040_up()", 0);
-
-	/* Initilize */
-	lp->tx_free_desc = TX_DCNT;
-	lp->rx_free_desc = 0;
-
-	/* Init descriptor */
-	memset(lp->desc_pool, 0, ALLOC_DESC_SIZE); /* Let all descriptor = 0 */
-	lp->tx_insert_ptr = (struct r6040_descriptor *)lp->desc_pool;
-	lp->tx_remove_ptr = lp->tx_insert_ptr;
-	lp->rx_insert_ptr = (struct r6040_descriptor *)lp->tx_insert_ptr+TX_DCNT;
-	lp->rx_remove_ptr = lp->rx_insert_ptr;
-	
-	/* Init TX descriptor */
-	descptr = lp->tx_insert_ptr;
-	desc_dma = lp->desc_dma;
-	start_dma = desc_dma;
-	for (i = 0; i < TX_DCNT; i++) {
-		descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct r6040_descriptor));
-		descptr->vndescp = (descptr + 1);
-		descptr = (descptr + 1);
-		desc_dma += sizeof(struct r6040_descriptor);
-	}
-	(descptr - 1)->ndesc = cpu_to_le32(start_dma);
-	(descptr - 1)->vndescp = lp->tx_insert_ptr;
-
-	/* Init RX descriptor */
-	start_dma = desc_dma;
-	descptr = lp->rx_insert_ptr;
-	for (i = 0; i < RX_DCNT; i++) {
-		descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct r6040_descriptor));
-		descptr->vndescp = (descptr + 1);
-		descptr = (descptr + 1);
-		desc_dma += sizeof(struct r6040_descriptor);
-	}
-	(descptr - 1)->ndesc = cpu_to_le32(start_dma);
-	(descptr - 1)->vndescp = lp->rx_insert_ptr;
-
-	/* Allocate buffer for RX descriptor */
-	rx_buf_alloc(lp,dev);
-
-#if RDC_DEBUG 
-descptr = lp->tx_insert_ptr;
-for (i = 0; i < TX_DCNT; i++) {
- printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
- descptr = descptr->vndescp;
-}
-descptr = lp->rx_insert_ptr;
-for (i = 0; i < RX_DCNT; i++) {
- printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
- descptr = descptr->vndescp;
-}
-#endif
-
-	/* MAC operation register */
-	outw(0x01, ioaddr+0x04);	/* Reset MAC */
-        outw(2   , ioaddr+0xAC);        /* Reset internal state machine */
-	outw(0   , ioaddr+0xAC);
-	udelay(5000);
-
-	/* TX and RX descriptor start Register */
-	tmp_addr = cpu_to_le32(lp->tx_insert_ptr);
-	tmp_addr = virt_to_bus((volatile void *)tmp_addr);
-	outw((u16) tmp_addr, ioaddr+0x2c);
-	outw(tmp_addr >> 16, ioaddr+0x30);
-	tmp_addr = cpu_to_le32(lp->rx_insert_ptr);
-	tmp_addr = virt_to_bus((volatile void *)tmp_addr);
-	outw((u16) tmp_addr, ioaddr+0x34);
-	outw(tmp_addr >> 16, ioaddr+0x38);
-
-	/* Buffer Size Register */
-	outw(MAX_BUF_SIZE, ioaddr+0x18);
-
-	if ((lp->switch_sig = phy_read(ioaddr, 0, 2)) == 0x0243)	// ICPlus IP175C Signature
-	{
-		phy_write(ioaddr, 29,31, 0x175C);	//Enable registers
-		lp->phy_mode = 0x8000;
-	} else {
-		/* PHY Mode Check */
-		phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
-		phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
-
-		if (PHY_MODE == 0x3100)
-			lp->phy_mode = phy_mode_chk(dev);
-		else
-			lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
-	}
-	/* MAC Bus Control Register */
-	outw(MBCR_DEFAULT, ioaddr+0x8);
-
-	/* MAC TX/RX Enable */
-	lp->mcr0 |= lp->phy_mode;
-	outw(lp->mcr0, ioaddr);
-
-	/* set interrupt waiting time and packet numbers */
-	outw(0x0802, ioaddr + 0x0C);
-	outw(0x0802, ioaddr + 0x10);
-
-	/* upgrade performance (by RDC guys) */
-	phy_write(ioaddr,30,17,(phy_read(ioaddr,30,17)|0x4000));        //bit 14=1
-	phy_write(ioaddr,30,17,~((~phy_read(ioaddr,30,17))|0x2000));    //bit 13=0
-	phy_write(ioaddr,0,19,0x0000);
-	phy_write(ioaddr,0,30,0x01F0);
-
-	/* Interrupt Mask Register */
-	outw(R6040_INT_MASK, ioaddr + 0x40);
-}
-
-/*
-  A periodic timer routine
-	Polling PHY Chip Link Status
-*/
-static void r6040_timer(unsigned long data)
-{
- 	struct net_device *dev=(struct net_device *)data;
-	struct r6040_private *lp = dev->priv;
-	u16 ioaddr = dev->base_addr, phy_mode;
- 
- 	RDC_DBUG("r6040_timer()", 0);
-
-	/* Polling PHY Chip Status */
-	if (PHY_MODE == 0x3100) 
-		phy_mode = phy_mode_chk(dev);
-	else phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
-
-	if (phy_mode != lp->phy_mode) {
-		lp->phy_mode = phy_mode;
-		lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode;
-		outw(lp->mcr0, ioaddr);
-		printk("<RDC> Link Change %x \n", inw(ioaddr));
-	}
-
-	/* Debug */
-//	printk("<RDC> Timer: CR0 %x CR40 %x CR3C %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c));
-
- 	/* Timer active again */
- 	lp->timer.expires = TIMER_WUT;
- 	add_timer(&lp->timer);
-}
-
-/* Allocate skb buffer for rx descriptor */
-static void rx_buf_alloc(struct r6040_private *lp,struct net_device *dev)
-{
-	struct r6040_descriptor *descptr;
-	int ioaddr = dev->base_addr ;
-
-	RDC_DBUG("rx_buf_alloc()", 0);
-	descptr = lp->rx_insert_ptr;
-	while(lp->rx_free_desc < RX_DCNT){
-		descptr->skb_ptr = dev_alloc_skb(MAX_BUF_SIZE);
-		if (!descptr->skb_ptr) break;
-		descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, descptr->skb_ptr->tail, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE));
-		descptr->status = 0x8000;
-		descptr = descptr->vndescp;
-		lp->rx_free_desc++;
-		outw(lp->mcr0 | 0x0002, ioaddr);	//Trigger Rx DMA
-	}
-	lp->rx_insert_ptr = descptr;
-}
-
-/* Status of PHY CHIP */
-static int phy_mode_chk(struct net_device *dev)
-{
-	struct r6040_private *lp = dev->priv;
-	int ioaddr = dev->base_addr, phy_dat;
-
-	RDC_DBUG("phy_mode_chk()", 0);
-
-	/* PHY Link Status Check */
-	phy_dat = phy_read(ioaddr, lp->phy_addr, 1);
-	if (!(phy_dat & 0x4)) return 0x8000;	/* Link Failed, full duplex */
-
-	/* PHY Chip Auto-Negotiation Status */
-	phy_dat = phy_read(ioaddr, lp->phy_addr, 1);
-	if (phy_dat & 0x0020) {
-		/* Auto Negotiation Mode */
-		phy_dat = phy_read(ioaddr, lp->phy_addr, 5);
-		phy_dat &= phy_read(ioaddr, lp->phy_addr, 4);
-		if (phy_dat & 0x140) phy_dat = 0x8000;
-		else phy_dat = 0;
-	} else {
-		/* Force Mode */
-		phy_dat = phy_read(ioaddr, lp->phy_addr, 0);
-		if (phy_dat & 0x100) phy_dat = 0x8000;
-		else phy_dat = 0x0000;
-	}
-
-	return phy_dat;
-};
-
-/* Read a word data from PHY Chip */
-static int phy_read(int ioaddr, int phy_addr, int reg_idx)
-{
-	int i = 0;
-
-	RDC_DBUG("phy_read()", 0);
-	outw(0x2000 + reg_idx + (phy_addr << 8), ioaddr + 0x20);
-	do{}while( (i++ < 2048) && (inw(ioaddr + 0x20) & 0x2000) );
-
-	return inw(ioaddr + 0x24);
-}
-
-/* Write a word data from PHY Chip */
-static void phy_write(int ioaddr, int phy_addr, int reg_idx, int dat)
-{
-	int i = 0;
-
-	RDC_DBUG("phy_write()", 0);
-	outw(dat, ioaddr + 0x28);
-	outw(0x4000 + reg_idx + (phy_addr << 8), ioaddr + 0x20);
-	do{}while( (i++ < 2048) && (inw(ioaddr + 0x20) & 0x4000) );
-}
-
-enum {
-	RDC_6040 = 0
-};
-
-static struct pci_device_id r6040_pci_tbl[] = {
-	{0x17F3, 0x6040, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040},
-	//{0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040},
-	{0,}			/* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, r6040_pci_tbl);
-
-static struct pci_driver r6040_driver = {
-	.name		= "r6040",
-	.id_table	= r6040_pci_tbl,
-	.probe		= r6040_init_one,
-	.remove		= __devexit_p(r6040_remove_one),
-};
-
-
-static int __init r6040_init (void)
-{
-	RDC_DBUG("r6040_init()", 0);
-
-	printk(version);
-	printed_version = 1;
-
-	if (parent != NULL)
-	{
-		struct net_device *the_parent = dev_get_by_name(parent);
-
-		if (the_parent == NULL)
-		{
-			printk (KERN_ERR DRV_NAME ": Unknown device \"%s\" specified.\n", parent);
-			return -EINVAL;
-		}
-		memcpy((u8 *)&adr_table[0][0], the_parent->dev_addr, 6);
-		memcpy((u8 *)&adr_table[1][0], the_parent->dev_addr, 6);
-		++*(u8 *)&adr_table[0][5];
-	}
-	return pci_register_driver (&r6040_driver);
-}
-
-
-static void __exit r6040_cleanup (void)
-{
-	RDC_DBUG("r6040_cleanup()", 0);
-	pci_unregister_driver (&r6040_driver);
-}
-
-module_init(r6040_init);
-module_exit(r6040_cleanup);
-
-
-/*
- * Local variables:
- *  compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c r6040.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */
diff --git a/target/linux/rdc-2.6/files/include/asm-i386/gpio.h b/target/linux/rdc-2.6/files/include/asm-i386/gpio.h
deleted file mode 100644
index ff87fca0c..000000000
--- a/target/linux/rdc-2.6/files/include/asm-i386/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_I386_GPIO_H
-#define _ASM_I386_GPIO_H
-
-#include <gpio.h>
-
-#endif /* _ASM_I386_GPIO_H */
diff --git a/target/linux/rdc-2.6/files/include/asm-i386/mach-generic/gpio.h b/target/linux/rdc-2.6/files/include/asm-i386/mach-generic/gpio.h
deleted file mode 100644
index 5305dcb96..000000000
--- a/target/linux/rdc-2.6/files/include/asm-i386/mach-generic/gpio.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ASM_MACH_GENERIC_GPIO_H
-#define __ASM_MACH_GENERIC_GPIO_H
-
-int gpio_request(unsigned gpio, const char *label);
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-int gpio_to_irq(unsigned gpio);
-int irq_to_gpio(unsigned irq);
-
-#include <asm-generic/gpio.h>           /* cansleep wrappers */
-
-#endif /* __ASM_MACH_GENERIC_GPIO_H */
diff --git a/target/linux/rdc-2.6/files/include/asm-i386/mach-rdc/gpio.h b/target/linux/rdc-2.6/files/include/asm-i386/mach-rdc/gpio.h
deleted file mode 100644
index 2368bd758..000000000
--- a/target/linux/rdc-2.6/files/include/asm-i386/mach-rdc/gpio.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef _RDC_GPIO_H
-#define _RDC_GPIO_H
-
-extern int rdc_gpio_get_value(unsigned gpio);
-extern void rdc_gpio_set_value(unsigned gpio, int value);
-extern int rdc_gpio_direction_input(unsigned gpio);
-extern int rdc_gpio_direction_output(unsigned gpio, int value);
-
-
-/* Wrappers for the arch-neutral GPIO API */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-        /* Not yet implemented */
-        return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-        /* Not yet implemented */
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-        return rdc_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-        return rdc_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-        return rdc_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-        rdc_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-        return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-        return irq;
-}
-
-/* For cansleep */
-#include <asm-generic/gpio.h>
-
-#endif /* _RDC_GPIO_H_ */
diff --git a/target/linux/rdc-2.6/files/include/asm-i386/mach-rdc/rdc321x_defs.h b/target/linux/rdc-2.6/files/include/asm-i386/mach-rdc/rdc321x_defs.h
deleted file mode 100644
index 838ba8f64..000000000
--- a/target/linux/rdc-2.6/files/include/asm-i386/mach-rdc/rdc321x_defs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#define PFX	"rdc321x: "
-
-/* General purpose configuration and data registers */
-#define RDC3210_CFGREG_ADDR     0x0CF8
-#define RDC3210_CFGREG_DATA     0x0CFC
-#define RDC_MAX_GPIO		0x3A
diff --git a/target/linux/rdc-2.6/image/Makefile b/target/linux/rdc-2.6/image/Makefile
deleted file mode 100644
index 52e4f4a39..000000000
--- a/target/linux/rdc-2.6/image/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-define Image/Prepare
-	$(CP) $(LINUX_DIR)/arch/i386/boot/bzImage $(KDIR)/bzImage
-endef
-
-define trxalign/jffs2-128k
-bs=128k
-endef
-define trxalign/jffs2-64k
-bs=64k
-endef
-define trxalign/squashfs
-bs=1024
-endef
-
-define Image/Build/ar525w
-	touch $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
-	mv $(KDIR)/root.$(1) $(KDIR)/root.tmp
-	dd of=$(KDIR)/root.$(1) if=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
-	$(RM) $(KDIR)/root.tmp
-	$(STAGING_DIR_HOST)/bin/airlink -b 1 -j $(shell bash -c 'echo $$[$(3)]') $(KDIR)/bzImage $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
-endef
-
-define Image/Build/wl153
-	ls -l $(KDIR)/bzImage | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/bzSize
-	gzip -9c $(KDIR)/root.$(1) > $(KDIR)/root.$(1).gz
-	ls -l $(KDIR)/root.$(1).gz | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/rdSize
-	echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/bzSize)\x$$$$(cut -c 5,6 < $(KDIR)/bzSize)\x$$$$(cut -c 3,4 < $(KDIR)/bzSize)\x$$$$(cut -c 1,2 < $(KDIR)/bzSize)" > $(KDIR)/bzSize.tmp
-	echo -n 'CSYS' > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
-	cat $(KDIR)/bzSize.tmp >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
-	echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/rdSize)\x$$$$(cut -c 5,6 < $(KDIR)/rdSize)\x$$$$(cut -c 3,4 < $(KDIR)/rdSize)\x$$$$(cut -c 1,2 < $(KDIR)/rdSize)WRRM" >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
-	cat $(KDIR)/bzSize.tmp $(KDIR)/bzImage $(KDIR)/root.$(1).gz >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
-	$(RM) $(KDIR)/bzSize.tmp $(KDIR)/bzSize $(KDIR)/rdSize
-endef
-
-define Image/Build
-	$(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).bzImage
-	$(call Image/Build/$(PROFILE),$(1),$(PROFILE),$(patsubst jffs2-%k,%,$(1)))
-endef
-
-$(eval $(call BuildImage))
diff --git a/target/linux/rdc-2.6/patches/000-rdc_fixes.patch b/target/linux/rdc-2.6/patches/000-rdc_fixes.patch
deleted file mode 100644
index 306fac79a..000000000
--- a/target/linux/rdc-2.6/patches/000-rdc_fixes.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-diff -urN linux-2.6.19/arch/i386/Kconfig linux-2.6.19.new/arch/i386/Kconfig
---- linux-2.6.19/arch/i386/Kconfig	2006-11-29 22:57:37.000000000 +0100
-+++ linux-2.6.19.new/arch/i386/Kconfig	2006-12-17 17:13:33.000000000 +0100
-@@ -180,6 +180,14 @@
- 	  Only choose this option if you have such a system, otherwise you
- 	  should say N here.
- 
-+config X86_RDC
-+	bool "Support for RDC 3211 boards"
-+	help
-+	  Support for RDC 3211 systems. Say 'Y' here if the kernel is 
-+	  supposed to run on an IA-32 RDC R3211 system.
-+	  Only choose this option if you have such as system, otherwise you
-+	  should say N here.
-+
- endchoice
- 
- config ACPI_SRAT
-diff -urN linux-2.6.19/arch/i386/Makefile linux-2.6.19.new/arch/i386/Makefile
---- linux-2.6.19/arch/i386/Makefile	2006-11-29 22:57:37.000000000 +0100
-+++ linux-2.6.19.new/arch/i386/Makefile	2006-12-17 17:13:33.000000000 +0100
-@@ -92,6 +92,10 @@
- mflags-$(CONFIG_X86_ES7000)	:= -Iinclude/asm-i386/mach-es7000
- mcore-$(CONFIG_X86_ES7000)	:= mach-default
- core-$(CONFIG_X86_ES7000)	:= arch/i386/mach-es7000/
-+# RDC subarch support
-+mflags-$(CONFIG_X86_RDC)	:= -Iinclude/asm-i386/mach-rdc
-+mcore-$(CONFIG_X86_RDC)		:= mach-default
-+core-$(CONFIG_X86_RDC)		+= arch/i386/mach-rdc/
- 
- # default subarch .h files
- mflags-y += -Iinclude/asm-i386/mach-default
---- timex.h	2007-08-07 10:44:03.816112250 -0700
-+++ linux/include/asm-i386/timex.h	2007-08-07 10:48:47.905866750 -0700
-@@ -11,6 +11,8 @@
- 
- #ifdef CONFIG_X86_ELAN
- #  define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */
-+#elif defined(CONFIG_X86_RDC)
-+#  define CLOCK_TICK_RATE 1041667 /* Underlying HZ for R8610 */
- #else
- #  define CLOCK_TICK_RATE 1193182 /* Underlying HZ */
- #endif
---- reboot_fixups.c	2007-08-07 12:02:00.908412250 -0700
-+++ linux/arch/i386/kernel/reboot_fixups.c	2007-08-07 12:18:49.391438500 -0700
-@@ -13,6 +13,17 @@
- #include <linux/pci.h>
- #include <asm/reboot_fixups.h>
- #include <asm/msr.h>
-+
-+static void r8610_reset(struct pci_dev *dev)
-+{
-+	int i;
-+
-+	outl(0x80003840,0xCF8);
-+	i=inl(0xCFC);
-+	i |= 0x1600;
-+	outl(i,0xCFC);
-+	outb(1,0x92);
-+}
- 
- static void cs5530a_warm_reset(struct pci_dev *dev)
- {
-@@ -40,6 +53,7 @@
- };
- 
- static struct device_fixup fixups_table[] = {
-+{ 0x17F3, 0x6030, r8610_reset },
- { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
- { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
- };
diff --git a/target/linux/rdc-2.6/patches/001-rdc3210_flash_map.patch b/target/linux/rdc-2.6/patches/001-rdc3210_flash_map.patch
deleted file mode 100644
index 0c407a114..000000000
--- a/target/linux/rdc-2.6/patches/001-rdc3210_flash_map.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-diff -urN linux-2.6.17/drivers/mtd/maps/Kconfig linux-2.6.17.new/drivers/mtd/maps/Kconfig
---- linux-2.6.17/drivers/mtd/maps/Kconfig	2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17.new/drivers/mtd/maps/Kconfig	2006-09-24 20:28:11.000000000 +0200
-@@ -76,6 +76,50 @@
- 	  PNC-2000 is the name of Network Camera product from PHOTRON
- 	  Ltd. in Japan. It uses CFI-compliant flash.
- 
-+config MTD_RDC3210
-+	tristate "CFI Flash device mapped on RDC3210"
-+	depends on X86 && MTD_CFI && MTD_PARTITIONS
-+	help
-+	  RDC-3210 is the flash device we find on Ralink reference board.
-+
-+config MTD_RDC3210_STATIC_MAP
-+	bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
-+	select MTD_RDC3210_FACTORY_PRESENT
-+	help
-+	  The mapping driver will use the static partition map for the
-+	  RDC-3210 flash device.
-+
-+config MTD_RDC3210_FACTORY_PRESENT
-+	bool "Reserve a partition on RDC3210 for factory presets"
-+	depends on MTD_RDC3210
-+	default y
-+	help
-+	  The mapping driver will reserve a partition on the RDC-3210 flash
-+	  device for resetting flash contents to factory defaults.
-+
-+config MTD_RDC3210_ALLOW_JFFS2
-+	bool "JFFS2 filesystem usable in a partition on RDC3210"
-+	depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
-+	help
-+	  The mapping driver will align a partition on the RDC-3210 flash
-+	  device to an erase-block boundary so that a JFFS2 filesystem may
-+	  reside on it.
-+
-+config MTD_RDC3210_SIZE
-+	hex "Amount of flash memory on RDC3210"
-+	depends on MTD_RDC3210
-+	default "0x400000"
-+	help
-+	  Total size in bytes of the RDC-3210 flash device
-+
-+config MTD_RDC3210_BUSWIDTH
-+	int "Width of CFI Flash device mapped on RDC3210"
-+	depends on MTD_RDC3210
-+	default "2"
-+	help
-+	  Number of bytes addressed on the RDC-3210 flash device before
-+	  addressing the same chip again
-+
- config MTD_SC520CDP
- 	tristate "CFI Flash device mapped on AMD SC520 CDP"
- 	depends on X86 && MTD_CFI && MTD_CONCAT
-diff -urN linux-2.6.17/drivers/mtd/maps/Makefile linux-2.6.17.new/drivers/mtd/maps/Makefile
---- linux-2.6.17/drivers/mtd/maps/Makefile	2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17.new/drivers/mtd/maps/Makefile	2006-09-24 20:26:10.000000000 +0200
-@@ -28,6 +28,7 @@
- obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
- obj-$(CONFIG_MTD_PNC2000)	+= pnc2000.o
- obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
-+obj-$(CONFIG_MTD_RDC3210)	+= rdc3210.o
- obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
- obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
diff --git a/target/linux/rdc-2.6/patches/002-r6040_ethernet.patch b/target/linux/rdc-2.6/patches/002-r6040_ethernet.patch
deleted file mode 100644
index 1b9302524..000000000
--- a/target/linux/rdc-2.6/patches/002-r6040_ethernet.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-diff -urN linux-2.6.17/drivers/net/Kconfig linux-2.6.17.new/drivers/net/Kconfig
---- linux-2.6.17/drivers/net/Kconfig	2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17.new/drivers/net/Kconfig	2006-09-25 13:14:27.000000000 +0200
-@@ -1358,6 +1358,24 @@
- 	  <file:Documentation/networking/net-modules.txt>.  The module will be
- 	  called apricot.
- 
-+config R6040
-+	tristate "RDC Fast-Ethernet support (EXPERIMENTAL)"
-+	depends on NET_PCI && EXPERIMENTAL
-+	select MII
-+	help
-+	  If you have a network (Ethernet) controller of this type, say Y and
-+	  read the Ethernet-HOWTO, available from
-+          <http://www.tldp.org/docs.html#howto>.
-+
-+          To compile this driver as a module, choose M here and read
-+          <file:Documentation/networking/net-modules.txt>.  The module will be
-+          called r6040.
-+
-+
-+config R6040_NAPI
-+	bool "NAPI support for R6040"
-+	depends on R6040
-+	default y
- config B44
- 	tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
- 	depends on NET_PCI && PCI && EXPERIMENTAL
-diff -urN linux-2.6.17/drivers/net/Makefile linux-2.6.17.new/drivers/net/Makefile
---- linux-2.6.17/drivers/net/Makefile	2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17.new/drivers/net/Makefile	2006-09-25 13:14:45.000000000 +0200
-@@ -106,6 +106,7 @@
- obj-$(CONFIG_NE3210) += ne3210.o 8390.o
- obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
- obj-$(CONFIG_B44) += b44.o
-+obj-$(CONFIG_R6040) += r6040.o
- obj-$(CONFIG_FORCEDETH) += forcedeth.o
- obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
- 
diff --git a/target/linux/rdc-2.6/patches/003-rootfstype.patch b/target/linux/rdc-2.6/patches/003-rootfstype.patch
deleted file mode 100644
index 34ac3d0a7..000000000
--- a/target/linux/rdc-2.6/patches/003-rootfstype.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux-2.6.19.2/init/do_mounts.c	2007-01-10 11:10:37.000000000 -0800
-+++ foo/init/do_mounts.c	2007-04-05 13:15:37.000000000 -0700
-@@ -243,6 +243,8 @@
- {
- 	char *s = page;
- 
-+	if (!root_fs_names)
-+		root_fs_names = "squashfs,jffs2";
- 	if (root_fs_names) {
- 		strcpy(page, root_fs_names);
- 		while (*s++) {
diff --git a/target/linux/rdc-2.6/patches/004-rdc3211_leds.patch b/target/linux/rdc-2.6/patches/004-rdc3211_leds.patch
deleted file mode 100644
index 2e704aa60..000000000
--- a/target/linux/rdc-2.6/patches/004-rdc3211_leds.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kconfig
---- linux-2.6.19.2/drivers/leds/Kconfig	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/drivers/leds/Kconfig	2007-04-16 22:09:40.000000000 +0200
-@@ -76,6 +76,12 @@
- 	  This option enables support for the Soekris net4801 and net4826 error
- 	  LED.
- 
-+config LEDS_RDC3211
-+	tristate "LED Support for RDC3211 boards"
-+	depends on LEDS_CLASS && X86_RDC
-+	help
-+	  This option enables support for the RDC3211 various LEDs.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
-diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile
---- linux-2.6.21.1/drivers/leds/Makefile	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1.new/drivers/leds/Makefile	2007-05-25 12:19:13.000000000 +0200
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
-+obj-$(CONFIG_LEDS_RDC3211)		+= leds-rdc3211.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/target/linux/rdc-2.6/patches/005-rdc_x86_cpu_type.patch b/target/linux/rdc-2.6/patches/005-rdc_x86_cpu_type.patch
deleted file mode 100644
index 185ec13f7..000000000
--- a/target/linux/rdc-2.6/patches/005-rdc_x86_cpu_type.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-diff -urN linux-2.6.22.1/arch/i386/kernel/cpu/Makefile linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile
---- linux-2.6.22.1/arch/i386/kernel/cpu/Makefile	2007-08-11 22:16:24.000000000 +0200
-+++ linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile	2007-08-13 16:37:32.000000000 +0200
-@@ -12,6 +12,7 @@
- obj-y	+=	rise.o
- obj-y	+=	nexgen.o
- obj-y	+=	umc.o
-+obj-$(CONFIG_X86_RDC)	+=	rdc.o
- 
- obj-$(CONFIG_X86_MCE)	+=	mcheck/
- 
-diff -urN linux-2.6.22.1/arch/i386/kernel/cpu/Makefile linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile
---- linux-2.6.22.1/include/asm-i386/processor.h	2007-08-13 16:42:25.000000000 +0200
-+++ linux-2.6.22.1.new/include/asm-i386/processor.h	2007-08-13 16:51:19.000000000 +0200
-@@ -92,6 +92,7 @@
- #define X86_VENDOR_TRANSMETA 7
- #define X86_VENDOR_NSC 8
- #define X86_VENDOR_NUM 9
-+#define X86_VENDOR_RDC 10
- #define X86_VENDOR_UNKNOWN 0xff
- 
- /*
diff --git a/target/linux/rdc-2.6/patches/600-x86_lzma.patch b/target/linux/rdc-2.6/patches/600-x86_lzma.patch
deleted file mode 100644
index bb10f1fdc..000000000
--- a/target/linux/rdc-2.6/patches/600-x86_lzma.patch
+++ /dev/null
@@ -1,1042 +0,0 @@
-diff -Naur linux-old/arch/i386/boot/compressed/LzmaDecode.c linux-lzma/arch/i386/boot/compressed/LzmaDecode.c
---- linux-old/arch/i386/boot/compressed/LzmaDecode.c	1969-12-31 19:00:00.000000000 -0500
-+++ linux-lzma/arch/i386/boot/compressed/LzmaDecode.c	2005-06-05 00:07:38.000000000 -0400
-@@ -0,0 +1,586 @@
-+/*
-+  LzmaDecode.c
-+  LZMA Decoder (optimized for Speed version)
-+  
-+  LZMA SDK 4.17 Copyright (c) 1999-2005 Igor Pavlov (2005-04-05)
-+  http://www.7-zip.org/
-+
-+  LZMA SDK is licensed under two licenses:
-+  1) GNU Lesser General Public License (GNU LGPL)
-+  2) Common Public License (CPL)
-+  It means that you can select one of these two licenses and 
-+  follow rules of that license.
-+
-+  SPECIAL EXCEPTION:
-+  Igor Pavlov, as the author of this Code, expressly permits you to 
-+  statically or dynamically link your Code (or bind by name) to the 
-+  interfaces of this file without subjecting your linked Code to the 
-+  terms of the CPL or GNU LGPL. Any modifications or additions 
-+  to this file, however, are subject to the LGPL or CPL terms.
-+*/
-+
-+#include "LzmaDecode.h"
-+
-+#ifndef Byte
-+#define Byte unsigned char
-+#endif
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+#define RC_READ_BYTE (*Buffer++)
-+
-+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
-+  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
-+
-+#ifdef _LZMA_IN_CB
-+
-+#define RC_TEST { if (Buffer == BufferLim) \
-+  { UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
-+  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
-+
-+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
-+
-+#else
-+
-+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
-+
-+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
-+ 
-+#endif
-+
-+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
-+
-+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
-+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
-+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
-+
-+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
-+  { UpdateBit0(p); mi <<= 1; A0; } else \
-+  { UpdateBit1(p); mi = (mi + mi) + 1; A1; } 
-+  
-+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)               
-+
-+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
-+  { int i = numLevels; res = 1; \
-+  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
-+  res -= (1 << numLevels); }
-+
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
-+
-+
-+#define kNumStates 12
-+#define kNumLitStates 7
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#ifdef _LZMA_OUT_READ
-+
-+typedef struct _LzmaVarState
-+{
-+  Byte *Buffer;
-+  Byte *BufferLim;
-+  UInt32 Range;
-+  UInt32 Code;
-+  #ifdef _LZMA_IN_CB
-+  ILzmaInCallback *InCallback;
-+  #endif
-+  Byte *Dictionary;
-+  UInt32 DictionarySize;
-+  UInt32 DictionaryPos;
-+  UInt32 GlobalPos;
-+  UInt32 Reps[4];
-+  int lc;
-+  int lp;
-+  int pb;
-+  int State;
-+  int RemainLen;
-+  Byte TempDictionary[4];
-+} LzmaVarState;
-+
-+int LzmaDecoderInit(
-+    unsigned char *buffer, UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+    unsigned char *dictionary, UInt32 dictionarySize,
-+    #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *InCallback
-+    #else
-+    unsigned char *inStream, UInt32 inSize
-+    #endif
-+    )
-+{
-+  Byte *Buffer;
-+  Byte *BufferLim;
-+  UInt32 Range;
-+  UInt32 Code;
-+  LzmaVarState *vs = (LzmaVarState *)buffer;
-+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
-+  UInt32 i;
-+  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
-+    return LZMA_RESULT_NOT_ENOUGH_MEM;
-+  vs->Dictionary = dictionary;
-+  vs->DictionarySize = dictionarySize;
-+  vs->DictionaryPos = 0;
-+  vs->GlobalPos = 0;
-+  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
-+  vs->lc = lc;
-+  vs->lp = lp;
-+  vs->pb = pb;
-+  vs->State = 0;
-+  vs->RemainLen = 0;
-+  dictionary[dictionarySize - 1] = 0;
-+  for (i = 0; i < numProbs; i++)
-+    p[i] = kBitModelTotal >> 1; 
-+
-+  #ifdef _LZMA_IN_CB
-+  RC_INIT;
-+  #else
-+  RC_INIT(inStream, inSize);
-+  #endif
-+  vs->Buffer = Buffer;
-+  vs->BufferLim = BufferLim;
-+  vs->Range = Range;
-+  vs->Code = Code;
-+  #ifdef _LZMA_IN_CB
-+  vs->InCallback = InCallback;
-+  #endif
-+
-+  return LZMA_RESULT_OK;
-+}
-+
-+int LzmaDecode(unsigned char *buffer, 
-+    unsigned char *outStream, UInt32 outSize,
-+    UInt32 *outSizeProcessed)
-+{
-+  LzmaVarState *vs = (LzmaVarState *)buffer;
-+  Byte *Buffer = vs->Buffer;
-+  Byte *BufferLim = vs->BufferLim;
-+  UInt32 Range = vs->Range;
-+  UInt32 Code = vs->Code;
-+  #ifdef _LZMA_IN_CB
-+  ILzmaInCallback *InCallback = vs->InCallback;
-+  #endif
-+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
-+  int state = vs->State;
-+  Byte previousByte;
-+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
-+  UInt32 nowPos = 0;
-+  UInt32 posStateMask = (1 << (vs->pb)) - 1;
-+  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
-+  int lc = vs->lc;
-+  int len = vs->RemainLen;
-+  UInt32 globalPos = vs->GlobalPos;
-+
-+  Byte *dictionary = vs->Dictionary;
-+  UInt32 dictionarySize = vs->DictionarySize;
-+  UInt32 dictionaryPos = vs->DictionaryPos;
-+
-+  Byte tempDictionary[4];
-+  if (dictionarySize == 0)
-+  {
-+    dictionary = tempDictionary;
-+    dictionarySize = 1;
-+    tempDictionary[0] = vs->TempDictionary[0];
-+  }
-+
-+  if (len == -1)
-+  {
-+    *outSizeProcessed = 0;
-+    return LZMA_RESULT_OK;
-+  }
-+
-+  while(len != 0 && nowPos < outSize)
-+  {
-+    UInt32 pos = dictionaryPos - rep0;
-+    if (pos >= dictionarySize)
-+      pos += dictionarySize;
-+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
-+    if (++dictionaryPos == dictionarySize)
-+      dictionaryPos = 0;
-+    len--;
-+  }
-+  if (dictionaryPos == 0)
-+    previousByte = dictionary[dictionarySize - 1];
-+  else
-+    previousByte = dictionary[dictionaryPos - 1];
-+#else
-+
-+int LzmaDecode(
-+    Byte *buffer, UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+    #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *InCallback,
-+    #else
-+    unsigned char *inStream, UInt32 inSize,
-+    #endif
-+    unsigned char *outStream, UInt32 outSize,
-+    UInt32 *outSizeProcessed)
-+{
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
-+  CProb *p = (CProb *)buffer;
-+
-+  UInt32 i;
-+  int state = 0;
-+  Byte previousByte = 0;
-+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
-+  UInt32 nowPos = 0;
-+  UInt32 posStateMask = (1 << pb) - 1;
-+  UInt32 literalPosMask = (1 << lp) - 1;
-+  int len = 0;
-+  
-+  Byte *Buffer;
-+  Byte *BufferLim;
-+  UInt32 Range;
-+  UInt32 Code;
-+  
-+  if (bufferSize < numProbs * sizeof(CProb))
-+    return LZMA_RESULT_NOT_ENOUGH_MEM;
-+  for (i = 0; i < numProbs; i++)
-+    p[i] = kBitModelTotal >> 1;
-+  
-+
-+  #ifdef _LZMA_IN_CB
-+  RC_INIT;
-+  #else
-+  RC_INIT(inStream, inSize);
-+  #endif
-+#endif
-+
-+  *outSizeProcessed = 0;
-+  while(nowPos < outSize)
-+  {
-+    CProb *prob;
-+    UInt32 bound;
-+    int posState = (int)(
-+        (nowPos 
-+        #ifdef _LZMA_OUT_READ
-+        + globalPos
-+        #endif
-+        )
-+        & posStateMask);
-+
-+    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IfBit0(prob)
-+    {
-+      int symbol = 1;
-+      UpdateBit0(prob)
-+      prob = p + Literal + (LZMA_LIT_SIZE * 
-+        (((
-+        (nowPos 
-+        #ifdef _LZMA_OUT_READ
-+        + globalPos
-+        #endif
-+        )
-+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-+
-+      if (state >= kNumLitStates)
-+      {
-+        int matchByte;
-+        #ifdef _LZMA_OUT_READ
-+        UInt32 pos = dictionaryPos - rep0;
-+        if (pos >= dictionarySize)
-+          pos += dictionarySize;
-+        matchByte = dictionary[pos];
-+        #else
-+        matchByte = outStream[nowPos - rep0];
-+        #endif
-+        do
-+        {
-+          int bit;
-+          CProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & 0x100);
-+          probLit = prob + 0x100 + bit + symbol;
-+          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      while (symbol < 0x100)
-+      {
-+        CProb *probLit = prob + symbol;
-+        RC_GET_BIT(probLit, symbol)
-+      }
-+      previousByte = (Byte)symbol;
-+
-+      outStream[nowPos++] = previousByte;
-+      #ifdef _LZMA_OUT_READ
-+      dictionary[dictionaryPos] = previousByte;
-+      if (++dictionaryPos == dictionarySize)
-+        dictionaryPos = 0;
-+      #endif
-+      if (state < 4) state = 0;
-+      else if (state < 10) state -= 3;
-+      else state -= 6;
-+    }
-+    else             
-+    {
-+      UpdateBit1(prob);
-+      prob = p + IsRep + state;
-+      IfBit0(prob)
-+      {
-+        UpdateBit0(prob);
-+        rep3 = rep2;
-+        rep2 = rep1;
-+        rep1 = rep0;
-+        state = state < kNumLitStates ? 0 : 3;
-+        prob = p + LenCoder;
-+      }
-+      else
-+      {
-+        UpdateBit1(prob);
-+        prob = p + IsRepG0 + state;
-+        IfBit0(prob)
-+        {
-+          UpdateBit0(prob);
-+          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IfBit0(prob)
-+          {
-+            #ifdef _LZMA_OUT_READ
-+            UInt32 pos;
-+            #endif
-+            UpdateBit0(prob);
-+            if (nowPos 
-+                #ifdef _LZMA_OUT_READ
-+                + globalPos
-+                #endif
-+                == 0)
-+              return LZMA_RESULT_DATA_ERROR;
-+            state = state < kNumLitStates ? 9 : 11;
-+            #ifdef _LZMA_OUT_READ
-+            pos = dictionaryPos - rep0;
-+            if (pos >= dictionarySize)
-+              pos += dictionarySize;
-+            previousByte = dictionary[pos];
-+            dictionary[dictionaryPos] = previousByte;
-+            if (++dictionaryPos == dictionarySize)
-+              dictionaryPos = 0;
-+            #else
-+            previousByte = outStream[nowPos - rep0];
-+            #endif
-+            outStream[nowPos++] = previousByte;
-+            continue;
-+          }
-+          else
-+          {
-+            UpdateBit1(prob);
-+          }
-+        }
-+        else
-+        {
-+          UInt32 distance;
-+          UpdateBit1(prob);
-+          prob = p + IsRepG1 + state;
-+          IfBit0(prob)
-+          {
-+            UpdateBit0(prob);
-+            distance = rep1;
-+          }
-+          else 
-+          {
-+            UpdateBit1(prob);
-+            prob = p + IsRepG2 + state;
-+            IfBit0(prob)
-+            {
-+              UpdateBit0(prob);
-+              distance = rep2;
-+            }
-+            else
-+            {
-+              UpdateBit1(prob);
-+              distance = rep3;
-+              rep3 = rep2;
-+            }
-+            rep2 = rep1;
-+          }
-+          rep1 = rep0;
-+          rep0 = distance;
-+        }
-+        state = state < kNumLitStates ? 8 : 11;
-+        prob = p + RepLenCoder;
-+      }
-+      {
-+        int numBits, offset;
-+        CProb *probLen = prob + LenChoice;
-+        IfBit0(probLen)
-+        {
-+          UpdateBit0(probLen);
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          numBits = kLenNumLowBits;
-+        }
-+        else
-+        {
-+          UpdateBit1(probLen);
-+          probLen = prob + LenChoice2;
-+          IfBit0(probLen)
-+          {
-+            UpdateBit0(probLen);
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            numBits = kLenNumMidBits;
-+          }
-+          else
-+          {
-+            UpdateBit1(probLen);
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            numBits = kLenNumHighBits;
-+          }
-+        }
-+        RangeDecoderBitTreeDecode(probLen, numBits, len);
-+        len += offset;
-+      }
-+
-+      if (state < 4)
-+      {
-+        int posSlot;
-+        state += kNumLitStates;
-+        prob = p + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
-+            kNumPosSlotBits);
-+        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          int numDirectBits = ((posSlot >> 1) - 1);
-+          rep0 = (2 | ((UInt32)posSlot & 1));
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            rep0 <<= numDirectBits;
-+            prob = p + SpecPos + rep0 - posSlot - 1;
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              RC_NORMALIZE
-+              Range >>= 1;
-+              rep0 <<= 1;
-+              if (Code >= Range)
-+              {
-+                Code -= Range;
-+                rep0 |= 1;
-+              }
-+            }
-+            while (--numDirectBits != 0);
-+            prob = p + Align;
-+            rep0 <<= kNumAlignBits;
-+            numDirectBits = kNumAlignBits;
-+          }
-+          {
-+            int i = 1;
-+            int mi = 1;
-+            do
-+            {
-+              CProb *prob3 = prob + mi;
-+              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
-+              i <<= 1;
-+            }
-+            while(--numDirectBits != 0);
-+          }
-+        }
-+        else
-+          rep0 = posSlot;
-+        if (++rep0 == (UInt32)(0))
-+        {
-+          /* it's for stream version */
-+          len = -1;
-+          break;
-+        }
-+      }
-+
-+      len += kMatchMinLen;
-+      if (rep0 > nowPos 
-+        #ifdef _LZMA_OUT_READ
-+        + globalPos || rep0 > dictionarySize
-+        #endif
-+        ) 
-+        return LZMA_RESULT_DATA_ERROR;
-+      do
-+      {
-+        #ifdef _LZMA_OUT_READ
-+        UInt32 pos = dictionaryPos - rep0;
-+        if (pos >= dictionarySize)
-+          pos += dictionarySize;
-+        previousByte = dictionary[pos];
-+        dictionary[dictionaryPos] = previousByte;
-+        if (++dictionaryPos == dictionarySize)
-+          dictionaryPos = 0;
-+        #else
-+        previousByte = outStream[nowPos - rep0];
-+        #endif
-+        len--;
-+        outStream[nowPos++] = previousByte;
-+      }
-+      while(len != 0 && nowPos < outSize);
-+    }
-+  }
-+  RC_NORMALIZE;
-+
-+  #ifdef _LZMA_OUT_READ
-+  vs->Buffer = Buffer;
-+  vs->BufferLim = BufferLim;
-+  vs->Range = Range;
-+  vs->Code = Code;
-+  vs->DictionaryPos = dictionaryPos;
-+  vs->GlobalPos = globalPos + nowPos;
-+  vs->Reps[0] = rep0;
-+  vs->Reps[1] = rep1;
-+  vs->Reps[2] = rep2;
-+  vs->Reps[3] = rep3;
-+  vs->State = state;
-+  vs->RemainLen = len;
-+  vs->TempDictionary[0] = tempDictionary[0];
-+  #endif
-+
-+  *outSizeProcessed = nowPos;
-+  return LZMA_RESULT_OK;
-+}
-diff -Naur linux-old/arch/i386/boot/compressed/LzmaDecode.h linux-lzma/arch/i386/boot/compressed/LzmaDecode.h
---- linux-old/arch/i386/boot/compressed/LzmaDecode.h	1969-12-31 19:00:00.000000000 -0500
-+++ linux-lzma/arch/i386/boot/compressed/LzmaDecode.h	2005-06-05 00:07:39.000000000 -0400
-@@ -0,0 +1,100 @@
-+/* 
-+  LzmaDecode.h
-+  LZMA Decoder interface
-+
-+  LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18)
-+  http://www.7-zip.org/
-+
-+  LZMA SDK is licensed under two licenses:
-+  1) GNU Lesser General Public License (GNU LGPL)
-+  2) Common Public License (CPL)
-+  It means that you can select one of these two licenses and 
-+  follow rules of that license.
-+
-+  SPECIAL EXCEPTION:
-+  Igor Pavlov, as the author of this code, expressly permits you to 
-+  statically or dynamically link your code (or bind by name) to the 
-+  interfaces of this file without subjecting your linked code to the 
-+  terms of the CPL or GNU LGPL. Any modifications or additions 
-+  to this file, however, are subject to the LGPL or CPL terms.
-+*/
-+
-+#ifndef __LZMADECODE_H
-+#define __LZMADECODE_H
-+
-+/* #define _LZMA_IN_CB */
-+/* Use callback for input data */
-+
-+/* #define _LZMA_OUT_READ */
-+/* Use read function for output data */
-+
-+/* #define _LZMA_PROB32 */
-+/* It can increase speed on some 32-bit CPUs, 
-+   but memory usage will be doubled in that case */
-+
-+/* #define _LZMA_LOC_OPT */
-+/* Enable local speed optimizations inside code */
-+
-+#ifndef UInt32
-+#ifdef _LZMA_UINT32_IS_ULONG
-+#define UInt32 unsigned long
-+#else
-+#define UInt32 unsigned int
-+#endif
-+#endif
-+
-+#ifdef _LZMA_PROB32
-+#define CProb UInt32
-+#else
-+#define CProb unsigned short
-+#endif
-+
-+#define LZMA_RESULT_OK 0
-+#define LZMA_RESULT_DATA_ERROR 1
-+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
-+
-+#ifdef _LZMA_IN_CB
-+typedef struct _ILzmaInCallback
-+{
-+  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
-+} ILzmaInCallback;
-+#endif
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+/* 
-+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
-+bufferSize += 100 in case of _LZMA_OUT_READ
-+by default CProb is unsigned short, 
-+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
-+*/
-+
-+#ifdef _LZMA_OUT_READ
-+int LzmaDecoderInit(
-+    unsigned char *buffer, UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+    unsigned char *dictionary, UInt32 dictionarySize,
-+  #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback
-+  #else
-+    unsigned char *inStream, UInt32 inSize
-+  #endif
-+);
-+#endif
-+
-+int LzmaDecode(
-+    unsigned char *buffer, 
-+  #ifndef _LZMA_OUT_READ
-+    UInt32 bufferSize,
-+    int lc, int lp, int pb,
-+  #ifdef _LZMA_IN_CB
-+    ILzmaInCallback *inCallback,
-+  #else
-+    unsigned char *inStream, UInt32 inSize,
-+  #endif
-+  #endif
-+    unsigned char *outStream, UInt32 outSize,
-+    UInt32 *outSizeProcessed);
-+
-+#endif
-diff -Naur linux-old/arch/i386/boot/compressed/lzma_misc.c linux-lzma/arch/i386/boot/compressed/lzma_misc.c
---- linux-old/arch/i386/boot/compressed/lzma_misc.c	1969-12-31 19:00:00.000000000 -0500
-+++ linux-lzma/arch/i386/boot/compressed/lzma_misc.c	2005-06-04 21:33:48.000000000 -0400
-@@ -0,0 +1,281 @@
-+/*
-+ * lzma_misc.c
-+ * 
-+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
-+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
-+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
-+ * 
-+ * Decompress LZMA compressed vmlinuz 
-+ * Version 0.9 Copyright (c) Ming-Ching Tiew mctiew@yahoo.com
-+ * Program adapted from misc.c for 2.6 kernel
-+ * Forward ported to latest 2.6 version of misc.c by
-+ * Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#undef CONFIG_PARAVIRT
-+#include <linux/linkage.h>
-+#include <linux/vmalloc.h>
-+#include <linux/screen_info.h>
-+#include <asm/io.h>
-+#include <asm/page.h>
-+#include <asm/boot.h>
-+
-+/* WARNING!!
-+ * This code is compiled with -fPIC and it is relocated dynamically
-+ * at run time, but no relocation processing is performed.
-+ * This means that it is not safe to place pointers in static structures.
-+ */
-+
-+/*
-+ * Getting to provable safe in place decompression is hard.
-+ * Worst case behaviours need to be analized.
-+ * Background information:
-+ *
-+ * The file layout is:
-+ *    magic[2]
-+ *    method[1]
-+ *    flags[1]
-+ *    timestamp[4]
-+ *    extraflags[1]
-+ *    os[1]
-+ *    compressed data blocks[N]
-+ *    crc[4] orig_len[4]
-+ *
-+ * resulting in 18 bytes of non compressed data overhead.
-+ *
-+ * Files divided into blocks
-+ * 1 bit (last block flag)
-+ * 2 bits (block type)
-+ *
-+ * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
-+ * The smallest block type encoding is always used.
-+ *
-+ * stored:
-+ *    32 bits length in bytes.
-+ *
-+ * fixed:
-+ *    magic fixed tree.
-+ *    symbols.
-+ *
-+ * dynamic:
-+ *    dynamic tree encoding.
-+ *    symbols.
-+ *
-+ *
-+ * The buffer for decompression in place is the length of the
-+ * uncompressed data, plus a small amount extra to keep the algorithm safe.
-+ * The compressed data is placed at the end of the buffer.  The output
-+ * pointer is placed at the start of the buffer and the input pointer
-+ * is placed where the compressed data starts.  Problems will occur
-+ * when the output pointer overruns the input pointer.
-+ *
-+ * The output pointer can only overrun the input pointer if the input
-+ * pointer is moving faster than the output pointer.  A condition only
-+ * triggered by data whose compressed form is larger than the uncompressed
-+ * form.
-+ *
-+ * The worst case at the block level is a growth of the compressed data
-+ * of 5 bytes per 32767 bytes.
-+ *
-+ * The worst case internal to a compressed block is very hard to figure.
-+ * The worst case can at least be boundined by having one bit that represents
-+ * 32764 bytes and then all of the rest of the bytes representing the very
-+ * very last byte.
-+ *
-+ * All of which is enough to compute an amount of extra data that is required
-+ * to be safe.  To avoid problems at the block level allocating 5 extra bytes
-+ * per 32767 bytes of data is sufficient.  To avoind problems internal to a block
-+ * adding an extra 32767 bytes (the worst case uncompressed block size) is
-+ * sufficient, to ensure that in the worst case the decompressed data for
-+ * block will stop the byte before the compressed data for a block begins.
-+ * To avoid problems with the compressed data's meta information an extra 18
-+ * bytes are needed.  Leading to the formula:
-+ *
-+ * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
-+ *
-+ * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
-+ * Adding 32768 instead of 32767 just makes for round numbers.
-+ * Adding the decompressor_size is necessary as it musht live after all
-+ * of the data as well.  Last I measured the decompressor is about 14K.
-+ * 10K of actuall data and 4K of bss.
-+ *
-+ */
-+
-+/*
-+ * gzip declarations
-+ */
-+
-+#define OF(args)  args
-+#define STATIC static
-+
-+#undef memcpy
-+
-+typedef unsigned char  uch;
-+typedef unsigned short ush;
-+typedef unsigned long  ulg;
-+
-+#define WSIZE 0x80000000	/* Window size must be at least 32k,
-+				 * and a power of two
-+				 * We don't actually have a window just
-+				 * a huge output buffer so I report
-+				 * a 2G windows size, as that should
-+				 * always be larger than our output buffer.
-+				 */
-+
-+static uch *inbuf;	/* input buffer */
-+static uch *window;	/* Sliding window buffer, (and final output buffer) */
-+
-+static unsigned insize;  /* valid bytes in inbuf */
-+static unsigned inptr;   /* index of next byte to be processed in inbuf */
-+static unsigned long workspace;
-+
-+#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-+		
-+/* Diagnostic functions */
-+#ifdef DEBUG
-+#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-+#  define Trace(x) fprintf x
-+#  define Tracev(x) {if (verbose) fprintf x ;}
-+#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-+#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-+#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-+#else
-+#  define Assert(cond,msg)
-+#  define Trace(x)
-+#  define Tracev(x)
-+#  define Tracevv(x)
-+#  define Tracec(c,x)
-+#  define Tracecv(c,x)
-+#endif
-+
-+static int  fill_inbuf(void);
-+  
-+/*
-+ * This is set up by the setup-routine at boot-time
-+ */
-+static unsigned char *real_mode; /* Pointer to real-mode data */
-+extern unsigned char input_data[];
-+extern int input_len;
-+
-+static void error(char *x);
-+static void *memcpy(void *dest, const void *src, unsigned n);
-+
-+#ifdef CONFIG_X86_NUMAQ
-+void *xquad_portio;
-+#endif
-+
-+static void* memcpy(void* dest, const void* src, unsigned n)
-+{
-+	int i;
-+	char *d = (char *)dest, *s = (char *)src;
-+
-+	for (i=0;i<n;i++) d[i] = s[i];
-+	return dest;
-+}
-+
-+/* ===========================================================================
-+ * Fill the input buffer. This is called only when the buffer is empty
-+ * and at least one byte is really needed.
-+ */
-+static int fill_inbuf(void)
-+{
-+	error("ran out of input data");
-+	return 0;
-+}
-+
-+
-+// When using LZMA in callback, the compressed length is not needed.
-+// Otherwise you need a special version of lzma compression program
-+// which will pad the compressed length in the header.
-+#define _LZMA_IN_CB
-+#include "LzmaDecode.h"
-+#include "LzmaDecode.c"
-+
-+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize);
-+
-+
-+/*
-+ * Do the lzma decompression
-+ * When using LZMA in callback, the end of input stream is automatically determined
-+ */
-+static int lzma_unzip(void)
-+{
-+
-+	unsigned int i;  /* temp value */
-+	unsigned int lc; /* literal context bits */
-+	unsigned int lp; /* literal pos state bits */
-+	unsigned int pb; /* pos state bits */
-+	unsigned int uncompressedSize = 0;
-+	unsigned char* p;
-+	
-+	ILzmaInCallback callback;
-+	callback.Read = read_byte;
-+
-+	/* lzma args */
-+	i = get_byte();
-+	lc = i % 9, i = i / 9;
-+	lp = i % 5, pb = i / 5;
-+	
-+	/* skip dictionary size */
-+	for (i = 0; i < 4; i++) 
-+		get_byte();
-+	// get uncompressedSize 	
-+	p= (char*)&uncompressedSize;	
-+	for (i = 0; i < 4; i++) 
-+	    *p++ = get_byte();
-+	    
-+	//get compressedSize 
-+	for (i = 0; i < 4; i++) 
-+		get_byte();
-+	
-+	// point it beyond uncompresedSize
-+	//workspace = window + uncompressedSize;
-+	
-+	/* decompress kernel */
-+	if (LzmaDecode((unsigned char*)workspace, ~0, lc, lp, pb, &callback,
-+		(unsigned char*)window, uncompressedSize, &i) == LZMA_RESULT_OK)
-+		return 0;
-+	else
-+		return 1;
-+}
-+
-+
-+#ifdef  _LZMA_IN_CB
-+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
-+{
-+	static unsigned int i = 0;
-+	static unsigned char val;
-+	*bufferSize = 1;
-+	val = get_byte();
-+	*buffer = &val;
-+	return LZMA_RESULT_OK;
-+}	
-+#endif
-+
-+static void error(char *x)
-+{
-+	while(1);	/* Halt */
-+}
-+
-+asmlinkage void decompress_kernel(void *rmode, unsigned long end,
-+			uch *input_data, unsigned long input_len, uch *output)
-+{
-+	real_mode = rmode;
-+
-+	window = output;
-+	inbuf  = input_data;	/* Input buffer */
-+	insize = input_len;
-+	inptr  = 0;
-+
-+	if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1))
-+		error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
-+	if ((workspace = end) > ((-__PAGE_OFFSET-(512 <<20)-1) & 0x7fffffff))
-+		error("Destination address too large");
-+#ifndef CONFIG_RELOCATABLE
-+	if ((u32)output != LOAD_PHYSICAL_ADDR)
-+		error("Wrong destination address");
-+#endif
-+
-+	lzma_unzip();
-+	return;
-+}
-diff -Naur linux-old/arch/i386/boot/compressed/Makefile linux-lzma/arch/i386/boot/compressed/Makefile
---- linux-old/arch/i386/boot/compressed/Makefile	2005-06-04 21:53:40.000000000 -0400
-+++ linux-lzma/arch/i386/boot/compressed/Makefile	2005-06-05 00:25:23.000000000 -0400
-@@ -4,7 +4,7 @@
- # create a compressed vmlinux image from the original vmlinux
- #
- 
--targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o \
-+targets		:= vmlinux vmlinux.bin vmlinux.bin.lzma head.o lzma_misc.o piggy.o \
- 			vmlinux.bin.all vmlinux.relocs
- EXTRA_AFLAGS	:= -traditional
- 
-@@ -17,7 +17,7 @@
- 	   $(call cc-option,-fno-stack-protector)
- LDFLAGS := -m elf_i386
- 
--$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
-+$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/lzma_misc.o $(obj)/piggy.o FORCE
- 	$(call if_changed,ld)
- 	@:
- 
-@@ -37,14 +37,14 @@
- 	$(call if_changed,relocbin)
- 
- ifdef CONFIG_RELOCATABLE
--$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
--	$(call if_changed,gzip)
-+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
-+	$(call if_changed,lzma)
- else
--$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
--	$(call if_changed,gzip)
-+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
-+	$(call if_changed,lzma)
- endif
- 
- LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
- 
--$(obj)/piggy.o: $(src)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-+$(obj)/piggy.o: $(src)/vmlinux.scr $(obj)/vmlinux.bin.lzma FORCE
- 	$(call if_changed,ld)
-diff -urN linux-2.6.19.2/scripts/Makefile.lib linux-2.6.19.2.new/scripts/Makefile.lib
---- linux-2.6.19.2/scripts/Makefile.lib	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/scripts/Makefile.lib	2007-04-15 23:51:54.000000000 +0200
-@@ -162,4 +162,9 @@
- quiet_cmd_gzip = GZIP    $@
- cmd_gzip = gzip -f -9 < $< > $@
- 
--
-+# LZMA
-+#
-+quiet_cmd_lzma = LZMA $@
-+cmd_lzma = bash -e scripts/lzma_kern $< $@ -lc7 -lp0 -pb0
-+# to use lzmacomp,
-+# cmd_lzma = lzmacomp $< 700 > $@
-diff -u linux/scripts/lzma_kern linux/scripts/lzma_kern
---- linux/scripts/lzma_kern	2007-07-27 20:18:17.013014750 -0700
-+++ linux/scripts/lzma_kern	2007-07-27 20:18:17.013014750 -0700
-@@ -0,0 +1,4 @@
-+get-size() { echo "$5" ;}
-+printf -v len '%.8x' "$(get-size $(ls -l "$1"))"
-+lzma e "$@"
-+echo -ne "\x$(echo $len | cut -c 7,8)\x$(echo $len | cut -c 5,6)\x$(echo $len | cut -c 3,4)\x$(echo $len | cut -c 1,2)" >> "$2"
diff --git a/target/linux/rdc-2.6/profiles/AR525W.mk b/target/linux/rdc-2.6/profiles/AR525W.mk
deleted file mode 100644
index 5c01554d4..000000000
--- a/target/linux/rdc-2.6/profiles/AR525W.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/ar525w
-  NAME:=AirLink101 AR525W
-  PACKAGES:=kmod-rt61-pci kmod-r6040
-endef
-$(eval $(call Profile,ar525w))
-
diff --git a/target/linux/rdc-2.6/profiles/WL-153.mk b/target/linux/rdc-2.6/profiles/WL-153.mk
deleted file mode 100644
index f030455b2..000000000
--- a/target/linux/rdc-2.6/profiles/WL-153.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (C) 2007 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/wl153
-  NAME:=Sitecom WL-153
-  PACKAGES:=kmod-rt61-pci kmod-r6040
-endef
-$(eval $(call Profile,wl153))
-